LG9: Lighting Guide 9 Lighting for Communal Residential Buildings

Transcription

1 LG9: Lighting Guide 9 Lighting for Communal Residential Buildings Rob Lancaster Industrial & Exterior Product Manager

2 LG9: 2013 General aspects of lighting communal buildings LED s, Automatic lighting controls and energy efficiency, maintenance Emergency lighting Luminaire types

3 LG9: 1997

4 LG9: 2013

5 LG9: 2013 This document is based upon the best knowledge available at the time of publication. However, no responsibility of any kind for any injury, death, loss, damage or delay however caused resulting from the use of these recommendations can be accepted by the Chartered Institute of Building Services Engineers, the Society of Light and Lighting, the author or others involved in its publication

6 Introduction Over 3.6million social housing properties in the UK Governed by a strictly defined system of rent control to ensure that rents are kept affordable Range from individual houses and apartments to high rise flats Quality lighting required to ensure reliability, performance and robustness Maximum amount of light from the minimum amount of energy, and utilising controls

7 Overview LG9 Covers new and refurbished buildings Lighting accounts for up to 30% electricity consumption Best practice for good illumination and pleasant ambience Considerations on maintenance and life costs Utilise daylight where possible Various overlap areas with other lighting guides Overall building layout and design considerations

8 Daylight contributions Sunlight availability by orientation at latitude 53⁰N

9 Entrances First impression of buildings light and welcoming Recommended 200 lux through direct and indirect luminaires Transition from outdoors to building Use less institutional products with good ceiling and wall illumination Warm white long life light sources Smooth light coloured décor

10 Entrances Stairwells and lift lobbies

11 Corridors Many corridors have little natural light Recommended 100lux, 20lux night time Care to be taken to avoid glare Vertical illumination important for facial recognition Standard downlighters and recessed patchy lighting to be avoided Avoid institutional and industrial type products where possible

12 Corridors Diffused lighting preferred to minimise glare Automated controls require good detection to cover all doorways Dimmed level for periods of vacancy down to 20% recommended

13 Corridors If recessed use specific downlighters designed for corridor use Corridor optic and lenses provide narrow distribution Small percentage washed onto walls and ceilings Minimal fittings required and excellent spacings Accessories help to improve the feel and look of an area May be used in conjunction with other feature luminaires Corridor Lighting

14 Corridors Downlighting corridor Lighting requirements:- 100lx ave, 0.40 Uo 42W PL T Downlight Eav = 106lx (0.62MF*) Uo = W LED Downlight Eav = 103lx (0.68MF*) Uo = 0.62 *Based on 1 year luminaire clean, 3 year room clean and 3 year lamp change

15 Corridors Luminaire Qty Circuit Wattage Total Circuit Watts (kw) Annual Power Consumption (kw) Running Cost per annum Total Luminaire Cost Maintenance Costs 10 Year Life Cycle Cost 42W PL-T , W LED , Saving Payback 1.00 Yrs *Based on 3000 burning hours per annum and 10 pence per kw/hr Electricity tariff

16 Stairs, Stairwells and lift lobbies Lighting on stairs is critical for safety Recommended 100lux on the treads Glare from lighting and windows should be kept to a minimum max 300cd/m² Light to shine downwards, treads illuminated, risers in shadow Controls may be used but should not leave areas in complete darkness push button type systems not recommended Opal and diffused luminaires preferable

17 Stairs, Stairwells and lift lobbies Stairwell calculations a balancing act! Luminaire access to be considered, LED reduces maintenance but emergencies still require battery changes

18 Stairs and Stairwells Beware of dark spots and shadows Use calculation surfaces where necessary

19 Stairs and Stairwells Alternative lighting positions can reduce luminaire points Half balconies easier to maintain than directly over stairs Consider emergency lighting levels

20 Bathrooms and Toilets Correct selection of luminaires within bathroom and toilet areas IP ratings Recommended 100lux toilets, 150lux bathrooms Controls provide significant savings reduce to 25% in communal toilets when vacant LED luminaires with instant light advantageous

21 Bathrooms and Toilets Minimum two luminaires in bathroom areas Higher IP ratings directly above shower advisable Night lighting advisable in particular for elderly residents Higher lighting levels for specialised applications Consider alternative uses for areas Emergency lighting for disabled toilets or rooms over 8m²

22 Bedrooms Residential type direct and indirect luminaires required Recommended 100lux Good colour rendering Task lighting recommended for desks Homely appearance with minimal controls Anti ligature luminaires required in specialist applications

23 Kitchens Residential ceiling mounted enclosed luminaires Recommended 200lux and warm colour temperatures K Good colour rendering, and easily cleaned luminaires Avoid shadowing through multiple luminaires and under-cupboard lighting Automatic lighting recommended

24 External Lighting Basic safety and security for residents staff and visitors Recommended 10lux pathways, 10lux car parks, Care homes 20-30lux with transition zones between interior and exterior areas Marking access routes and entrances and create pleasant environment Steps and obstacles to be highlighted Smaller lower powered luminaires preferable to high output floodlights and care to avoid glare into residents accommodation

25 LEDs case study Exterior Lighting Car Park Lighting requirements:- Medium traffic - 10lx ave, 0.25 Uo 70W MBI Lantern 31W LED Lantern Eav = 11lx (0.46MF*) Uo = 0.39 Eav = 13lx (0.63MF*) Uo = 0.52 *Based on 2 year cleaning and bulk lamp change

26 LEDs case study Exterior Lighting Car Park Luminaire Qty Circuit Wattage Total Circuit Watts (kw) Annual Power Consumption (kw) Running Cost per annum Total Luminaire Cost Maintenance Costs 10 Year Life Cycle Cost 70W MBI , , , W LED , , Saving 6, Payback 2.3 Yrs *Based on 3800 burning hours per annum and 10 pence per kw/hr Electricity tariff

27 Special Applications Sheltered accommodation, residential accommodation and care homes Recreation areas lux depending upon use Laundry rooms and utility areas 200lux Dormitories 100lux Nursing homes Hospices Schools Mental health trusts Local task lighting for reading

28 Colour and Decor Co-ordination of lighting and colours essential Contrasting colours help identify areas in large blocks and on multiple floors Use of colour can help visually impaired people Finished need to durable and generally light in colour LG11 gives guidance on surface reflectance and colours

29 Equipment Use Daylight where possible and practical Select efficient luminaires and use them effectively Avoid overlighting Ensure luminaires are not left on unnecessarily Insure effective maintenance including lumen depreciation Monitor lighting to ensure correct operation and switching

30 Equipment

31 Lamps Some Lamps are better than others: T12 Typical Life 15,000hrs Up to 69lm/W Mercury Typical Life 20,000hrs Up to 50lm/W T8 Typical Life 20,000hrs Up to 90lm/W SON-T Typical Life 28,000hrs Up to 123lm/W T5 High Output T5 High Efficiency T5 ECO Typical Life 25,000hrs Up to 106lm/W MBI-T Typical Life 18,000hrs Up to 110lm/W Compact Fluorescent Typical Life 13,000hrs Up to 74lm/W GLS Typical Life 400-2,000hrs Up to 10lm/W 2D Lamps Typical Life 12,000hrs Up to 80lm/W * All lamp life figures based on High Frequency control gear and to 50% failures

32 Light Source Options Light Source Description h L (lm/w) 500W High pressure Na W Metal Halide 122 TL HE Tube Fluorescent 105 Best lowcurrent LED Best bare LED Tube 2014 DOE Roadmap Luminous Efficacy (lm/w) fluorescent Illumination Grade 4000K 70CRI LED Year Roadmap 4000K 70CRI 2015 LUXEON Rebel ES Typical 700mA Typical Led output +10% efficacy year on year,

33 Equipment Wattage 4x14W 4x13W Eco 30W LED Luminaire Lumens 3520lm 3486lm 3030lm Circuit Wattage 66W 57W 35W Efficacy (lm/w) % Increase in efficiency

34 White light

35 White light Phosphor coating White light Blue light

36 White light Phosphor coating

37 Colour performance Grade: CRI Applications: Excellent 100 Print Production Good 80 General Environments Moderate 60 Poor 40 Exterior Lighting

38 Colour performance CRI BSEN

39 Colour performance Colour Temp Colour Rendering Lumen Output BIN A BIN B BIN C

40 Colour performance Black Body Locus

41 Colour performance

42 LED life time The life of an LED luminaire is defined by the luminaire manufacturer. Manufacturers will select their own L and B values and consequently the life they wish to claim Luminaire life time to L70/B10 is currently the norm but there is nothing the defines these values must be used. When comparing with lamp life remember lamps rated life are to 50% failures! Make sure you are comparing apples with apples!!

43 Luminaire system Lamps and LEDs.. but what about the rest of the luminaire? LEDs Circuit boards Wiring Plugs/sockets Optics Control gear Luminaire body

44 LED system Typical LED series circuit X X X

45 LED system

46 LED system LED circuit protection X

47 LED system Thermal management Circuit protection SYSTEM RELIABILITY! Quality construction Electronics Quality materials

48 Photometry How do we photometrically test luminaires?

49 Photometry + + Relative Photometry Absolute Photometry

50 Photometry 32W TC-T 24W LED Lamp Lumens 2400lm Light Output Ratio 66% Circuit Wattage 35W Lamp Lumens No lamp! Light Output Ratio 100% Circuit Wattage 29W Lumen Output 1584lm Lumen Output 2100lm Lumen Output 45.3LL/CW Lumen Output 72.4LL/CW

51 Equipment

52 Equipment

53 Controls The most efficient luminaire is still wasting 100% of its energy if it is on when it is not required Most basic form are Photocells, these are usually non-adjustable but switch off when daylight enters the sensor PIR s switch when activity is detected through Infra-Red detection. These have built in light detectors and time delays that maybe adjusted manually. Microwave detectors simple cheap detection system, false triggering and nuisance switching through vibration and noise Smart controls are the most complete lighting control system, they combine PIR detection with light a light sensor, and are fully programmable

54 Lighting controls Energy savings through switching User comfort and convenience Systems should be simple and intuitive Ensure detection patterns cover all eventualities and entry points Absence / Presence detection options Never leave critical areas in darkness Huge energy savings to be made

55 Lighting controls GOOD COVERAGE INDIVIDUAL LUMINAIRE DETECTION Plan view

56 Lighting controls

57 Lighting controls Buildings should be designed to maximise daylight contributions Typical daylight sensor savings 40-60% Individual dimming control preferable over group dimmed systems Luminaires away from windows can still make significant savings through maintained illuminance and internal reflections EXPLOITING DAYLIGHT Dimming and switching helps with part L compliance when used with efficient luminaires

58 Lighting controls Data logging In many cases users do not realise energy usage and wastage Before and after data logging provides excellent evidence of power use Results through daylight dimming and PIR detection are often better than expected Payback on installations can usually be justified in short time periods Combined with carbon taxes, energy costs and maintenance controls are invaluable

59 Lighting controls 72% Saving - 7am-8pm application

60 University Case Study Corridor & Stairwells in Halls of Residence Mainly 28W 2D Switch Start & 26W TC-T HF Never switched off

61 University Case Study Trial Installation 19W LED + Intelligent controls 33% reduction in load of a typical luminaire Fewer luminaires Power Monitoring Exercise 1 week in January Luminaires on for 6 hours/day, not 24 Whilst on, average output = 30% >95% energy saving Electricity cost reduced from 26.9K to 3K

62 Social Housing Social Housing 24/7 operation Intelligent controls integral to LED luminaires (Internal and external versions) Used on stairwells, balconies, and lift lobbies External version used by doorways, open balconies

63 Social Housing Luminaire 1 Luminaire 2 Luminaire 3 Luminaire 4 Luminaire 5 Luminaire 6 Luminaire 7 Annual Burns Hours (Switched) R Hours Powered R Hours Lamp On Lamp Hours Corrected PIR Saving 71% 64% 92% 91% 72% 94% 89% DSI Average Average Power 42% 58% 46% 41% 40% 44% 33% Dimming Saving 57.5% 42.0% 54.0% 59.0% 60.0% 56.0% 67.5% Total saving 88% 79% 96% 96% 89% 97% 96% Total Saving 92% Actual data downloaded from intelligent luminaires 7 luminaires installed within housing corridor PIR saving up to 94% Daylight saving up to 67.5%

64 Social Housing 12,000 Cumulative Running Cost Comparison 10,000 8,000 Cost [ ] 6,000 4,000 2,000 0 Existing Proposed Scheme Existing Including Maintanance INITIAL Time [Years] Actual figures recorded from Site 2.8 year payback 1.5k pa Energy saved 1.1k pa maintenance saved Running Cost per annum EXISTING SCHEME 1, PROPOSED SCHEME Annual savings 1, Total savings including maintanance per annum 2, Estimated payback time [yrs] 2.8 Estimated payback time [months] 34

65 Social Housing Types of environments where LG9 applies Luminaires should be suitable for such environments

66 Lighting controls Open areas Escape routes 0.5lux minimum 1.0lux minimum / centre line

67 Emergency Lighting LG12 Technically known as Escape Lighting To facilitate safe exit from the building when the normal lighting fails To allow potentially dangerous equipment to be made safe before evacuation To enable Fire Wardens & Fire and Rescue Service to search the building & locate missing people

68 Emergency Lighting Regulatory Reform (Fire Safety) Order 2005 Comply with Means of Escape Requirements (BS5266:1, :7 & BS5499:4) Determine Policy/Procedures & provide Information Training & Drills Test & Maintain essential systems (BS5266:8) Keep records Certificates/ Policy/ Risk Assessment/ Reviews / Monitoring/ Maintenance/ Upgrades (BS5266:8)

69 Emergency Lighting Emergency Lighting needs to be fed from the local lighting circuit Lighting designs must meet uniformity requirements 40:1 Avoid disability glare Minimum of 2 luminaires per compartment Exit sign requirements on exit routes, near exits and to avoid any confusion in an emergency

70 Emergency Lighting

71 Emergency Lighting Lens technology Standard 6m spacing Area 9m spacing Corridor 20m spacing 3W 800mA = 220 lumen output 50,000 hour life 100,000 hr 4w LED strip vs. 4,000 hr T5 8w fluorescent

72 Emergency Lighting Inspection & Testing BS EN 50172:2004 Commissioning Full rated duration (after 24 hours uninterrupted charge time) Monthly Short test to ensure emergency lamp functionality Annual Full rated duration test Autotest systems reduce much of the testing time required Networked systems can maintain records of testing Reduced ongoing testing costs & remote monitoring

73 Other Considerations Luminaire selection: Installation IP Rating Robustness Emergency options Light output Energy use Types of controls Expected life Maintenance Low cost of ownership over lifecycle which meets the needs of end users

74