arxiv:1112.0908v1 [hep-ph] 5 Dec 2011



Similar documents
arxiv:hep-ph/ v1 24 Dec 1998

arxiv:hep-ph/ v1 25 Jul 1996

Understanding Poles and Zeros

Section 9.5: Equations of Lines and Planes

Awell-known lecture demonstration1

Local and Global Duality and the Determination of α(m Z )

EQUATIONS and INEQUALITIES

Dot product and vector projections (Sect. 12.3) There are two main ways to introduce the dot product

Cross product and determinants (Sect. 12.4) Two main ways to introduce the cross product

9 Multiplication of Vectors: The Scalar or Dot Product

Polarization of Light

Lecture 6. Weight. Tension. Normal Force. Static Friction. Cutnell+Johnson: , second half of section 4.7

Chapter 4. Forces and Newton s Laws of Motion. continued

9.4. The Scalar Product. Introduction. Prerequisites. Learning Style. Learning Outcomes

MATH2210 Notebook 1 Fall Semester 2016/ MATH2210 Notebook Solving Systems of Linear Equations... 3

State of Stress at Point

Progress in understanding quarkonium polarization measurements

Ajit Kumar Patra (Autor) Crystal structure, anisotropy and spin reorientation transition of highly coercive, epitaxial Pr-Co films

arxiv:hep-lat/ v1 30 Oct 1992

Magnetic Dipoles. Magnetic Field of Current Loop. B r. PHY2061 Enriched Physics 2 Lecture Notes

Experiment 9. The Pendulum

Solutions for Review Problems

Torsion Tests. Subjects of interest

Positive Feedback and Oscillators

Solutions to old Exam 1 problems

Math 241, Exam 1 Information.

THREE DIMENSIONAL GEOMETRY

MAT 1341: REVIEW II SANGHOON BAEK

Why the high lying glueball does not mix with the neighbouring f 0. Abstract

x x y y Then, my slope is =. Notice, if we use the slope formula, we ll get the same thing: m =

Vector Math Computer Graphics Scott D. Anderson

Regularities of Signal and Sensitivity Variation of a Reflection Fiber Optopair Sensor Dependent on the Angle between Axes of Fiber Tips

Solutions to Problems in Goldstein, Classical Mechanics, Second Edition. Chapter 7

Equations Involving Lines and Planes Standard equations for lines in space

A vector is a directed line segment used to represent a vector quantity.

Two vectors are equal if they have the same length and direction. They do not

Chapter 15 Collision Theory

Section V.3: Dot Product

Lecture L22-2D Rigid Body Dynamics: Work and Energy

1. Units of a magnetic field might be: A. C m/s B. C s/m C. C/kg D. kg/c s E. N/C m ans: D

Figure 1.1 Vector A and Vector F

LINES AND PLANES IN R 3

Structural Axial, Shear and Bending Moments

Chapter 22: Electric Flux and Gauss s Law

Lecture L3 - Vectors, Matrices and Coordinate Transformations

Chapter 18 Static Equilibrium

The Matrix Elements of a 3 3 Orthogonal Matrix Revisited

Some Comments on the Derivative of a Vector with applications to angular momentum and curvature. E. L. Lady (October 18, 2000)

2.2 Magic with complex exponentials

Mechanical Properties - Stresses & Strains

In order to describe motion you need to describe the following properties.

CHAPTER FIVE. 5. Equations of Lines in R 3

CHAPTER 24 GAUSS S LAW

Lecture L29-3D Rigid Body Dynamics

Section 1.1 Linear Equations: Slope and Equations of Lines

A Dynamic Analysis of Price Determination Under Joint Profit Maximization in Bilateral Monopoly

v 1 v 3 u v = (( 1)4 (3)2, [1(4) ( 2)2], 1(3) ( 2)( 1)) = ( 10, 8, 1) (d) u (v w) = (u w)v (u v)w (Relationship between dot and cross product)

Phasors. Phasors. by Prof. Dr. Osman SEVAİOĞLU Electrical and Electronics Engineering Department. ^ V cos (wt + θ) ^ V sin (wt + θ)

Physics 221 Experiment 5: Magnetic Fields

Mechanics 1: Conservation of Energy and Momentum

Insertion Devices Lecture 4 Permanent Magnet Undulators. Jim Clarke ASTeC Daresbury Laboratory

Eigenvalues, Eigenvectors, and Differential Equations

Q27.1 When a charged particle moves near a bar magnet, the magnetic force on the particle at a certain point depends

Frequency Map Experiments at the Advanced Light Source. David Robin Advanced Light Source

Math 1. Month Essential Questions Concepts/Skills/Standards Content Assessment Areas of Interaction

Linear Equations. Find the domain and the range of the following set. {(4,5), (7,8), (-1,3), (3,3), (2,-3)}

Least-Squares Intersection of Lines

Math Placement Test Practice Problems

3.2. Solving quadratic equations. Introduction. Prerequisites. Learning Outcomes. Learning Style

The Point-Slope Form

FRICTION, WORK, AND THE INCLINED PLANE

ROUTH S STABILITY CRITERION

Lecture L6 - Intrinsic Coordinates

Section 10.5 Rotation of Axes; General Form of a Conic

arxiv:hep-ph/ v1 11 Mar 1996

10.5. Click here for answers. Click here for solutions. EQUATIONS OF LINES AND PLANES. 3x 4y 6z 9 4, 2, 5. x y z. z 2. x 2. y 1.

Acousto-optic modulator

What are the place values to the left of the decimal point and their associated powers of ten?

Algebra 2 Chapter 1 Vocabulary. identity - A statement that equates two equivalent expressions.

HIGH-ENERGY COLLIDER PARAMETERS: e + e Colliders (I)

13.4 THE CROSS PRODUCT

Section 11.1: Vectors in the Plane. Suggested Problems: 1, 5, 9, 17, 23, 25-37, 40, 42, 44, 45, 47, 50

Rotation: Moment of Inertia and Torque

Reflection and Refraction

Orbits of the Lennard-Jones Potential

Measurement of Charge-to-Mass (e/m) Ratio for the Electron

Equations of Lines and Planes

Chapter 15, example problems:

AN ANALYSIS OF ZERO DEGREE CALORIMETER SHOWER MAXIMUM DETECTOR DATA FOR POLARIMETRY AT STAR

arxiv:hep-ph/ v2 2 Nov 2004

Math 0980 Chapter Objectives. Chapter 1: Introduction to Algebra: The Integers.

The accurate calibration of all detectors is crucial for the subsequent data

MA107 Precalculus Algebra Exam 2 Review Solutions

University of Lille I PC first year list of exercises n 7. Review

AP Physics - Vector Algrebra Tutorial

NMR Techniques Applied to Mineral Oil, Water, and Ethanol

x(x + 5) x 2 25 (x + 5)(x 5) = x 6(x 4) x ( x 4) + 3

[1] Diagonal factorization

Bounding the Higgs width at the LHC

Top rediscovery at ATLAS and CMS

Transcription:

MZ-TH/11-45 December 2011 arxiv:1112.0908v1 [hep-ph] 5 Dec 2011 Top quark polarization at a polarized linear e + e collider S. Groote 1,2 and J.G. Körner 1 1 Institut für Physik, Johannes-Gutenberg-Universität, Mainz, Germany 2 Füüsika Instituut, Tartu Ülikool, Tartu, Estonia Abstract We discuss the polarization of top quarks produced at a polarized linear e + e collider. Close-to-maximal values of the top quark polarization can be achieved with longitudinal beam polarizations (h 0.80, h + +0.625) or (h +0.80, h + 0.625) at intermediate beam energies. The option (h 0.80, h + +0.625) has to be preferred since this choice is quite stable against variations of the beam polarization. All our quantitative results have been obtained at NLO QCD. 1

1 Introductory remarks It is well known that the top quark keeps its polarization acquired in production when it decays since τ hadronization τ decay. One can test the Standard Model (SM) and/or non-sm couplings through polarization measurements involving top quark decay (mostly t b + W + ). New observables involving top quark polarization can be defined such as < P p > (see e.g. [1, ]). It is clear that the analyzing power of such observables is largest for large values of the polarization of the top quark P. This calls for large polarization values. It is, nevertheless, desirable to have a control sample with small polarization of the top quark. In this talk we report on the results of investigations in [7] whose aim was to find maximal and minimal values of top quark polarization at a linear e + e collider by tuning the longitudinal beam polarization [7]. At the same time one wants to keep the top quark pair production cross section large. It is a lucky coincidence that all these goals can be realized at the same time. Let usremind the reader that thetopquark is polarizedeven forzero beampolarization through vector-axial vector interference effects v e a e, v e a f, v f a e, v f a f, where v e,a e : electron current coupling (1) v f,a f : top quark current coupling (2) In Fig. 1 we plot the cosθ dependence of the zero beam polarization top quark polarization for different characteristic energies at s = 360 GeV (close to threshold), s = 500 GeV (ILC phase 1), s = 1000 GeV (ILC phase 2) and s = 3000 GeV (CLIC). We mention that theplanning oftheilchas reached astagewhere thetechnical DesignReport(TDR) will be submitted in 2012. 2 Top quark polarization at threshold and in the high energy limit The polarization of the top quark depends on the c.m. energy s, the scattering angle cosθ, the electroweak coupling coefficients g ij and the effective beam polarization P eff, i.e. one has P = P ( s,cosθ,g ij,p eff ), (3) where the effective beam polarization appearing in (3) is given by P eff = h h + 1 h h +. (4) and where h and h + are the longitudinal polarization of the electron and positron beams ( 1 < h ± < 1), respectively. For general energies the functional dependence Eq.(3) is not simple. Even if the electroweak couplings g ij are fixed one remains with a three dimensional parameter space 2

Figure 1: Total NLO top quark polarization for zero beam polarization ( s,cosθ,p eff ). However, the polarization formula considerable simplifies at nominal threshold s = 2m and in the high energy limit s. At threshold and at the Born term level one has P thresh = P eff A LR 1 P eff A LR ˆn e, (5) where A LR is the left-right beam polarization asymmetry (σ LR σ RL )/(σ LR + σ RL ) at threshold and ˆn e is a unit vector pointing into the direction of the electron momentum. We use a notation where σ(lr/rl) = σ(h = 1;h + = ±1). In terms of the electroweak coupling parameters g ij, the nominal polarization asymmetry at threshold s = 2m t is given by A LR = (g 41 + g 42 )/(g 11 + g 12 ) = 0.409. Eq.(5) shows that, at threshold and at the Born term level, the polarization P is parallel to the beam axis irrespective of the scattering angle and has maximal values P = 1 for P eff = ±1. Zero polarization is achieved for P eff = A LR = 0.409. In the high energy limit the polarization of the top quark is purely longitudinal, i.e. the polarization points into the direction of the top quark. At the Born term level one finds P(cosθ) = P (l) (cosθ) ˆp t with P (l) (cosθ) = (g 14 +g 41 +P eff (g 11 +g 44 ))(1+cosθ) 2 +(g 14 g 41 P eff (g 11 g 44 ))(1 cosθ) 2 (g 11 +g 44 +P eff (g 14 +g 41 ))(1+cosθ) 2 +(g 11 g 44 P eff (g 14 g 41 ))(1 cosθ) 2 (6) In the same limit, the electroweak coupling coefficients appearing in (6) take the numerical values g 11 = 0.601, g 14 = 0.131, g 41 = 0.201 and g 44 = 0.483. 3

It is quite evident that the two limiting cases have quite a different characteristics and different functional behaviour. The question is whether the two limiting cases can be taken as guiding principles for intermediate energies and for which. The answer is yes and no, or sometimes. Take, for example, the differential cos θ rate which is flat at threshold and shows a strong forward peak in the high energy limit with very little dependence on P eff. This can be seen by substituting the numerical high energy values of the gauge couplings g ij in the denominator of Eq.(6). One finds dγ dcosθ (s ) (1.084 0.332P eff)(1+cosθ) 2 +(0.118 0.007P eff )(1 cosθ) 2. (7) More detailed calculations show that the strong forward dominance of the rate sets in rather fast above threshold [7]. This is quite welcome since the forward region is favoured from the polarization point of view. As another example take the vanishing of the polarization which, at threshold, occurs at P eff = 0.409. In the high energy limit, and in the forward region where the numerator part of (6) proportional to (1+cosθ) 2 dominates, one finds a polarization zero at P eff = (g 14 +g 41 )/(g 11 +g 44 ) = 0.306. The two values of P eff do not differ much from another. 3 Effective beam polarization Let us briefly recall how the effective beam polarization P eff defined in Eq.(4) enters the description of polarized beam effects. Consider the rates σ LR and σ RL for 100% longitudinally polarized beams. The rate σ(beampol) for partially polarized beams is then given by (see. e.g. [8]) σ(beampol) = 1 h 1+h + σ LR + 1+h 1 h + σ RL 2 2 2 2 = 1(1 h 4 h + ) ( σ LR +σ RL +P eff ( σ LR +σ RL ) ). (8) The rateσ(beampol) carries anoverall helicity alignment factor (1 h h + ) which drops out when one calculates the normalized polarization components of the top quark as in Eqs.(5) and (6). This explains why the polarization depends only on P eff and not separately on h and h +. Note also that there is another smaller rate enhancement factor in (8) for negative values of P eff due to the fact that generally σ LR > σ RL. Next consider contour plots P eff = const in the (h,h + ) plane as shown in Fig.2. If one wants large production rates one has to keep to Quadrants II and IV in Fig.2 because of the helicity alignment factor (1 h h + ) in Eq.(8). Fig.2 shows that near maximal values of P eff can be achieved with non-maximal values of (h,h + ). The two examples shown in Fig.2 refer to (h = 0.80, h + = +0.625) leadsto P eff = 0.95 (h = +0.80, h + = 0.625) leadsto P eff = +0.95 (9) 4

These two options are at the technical limits what can be can achieved [9]. In the next section we shall see that the choice P eff 0.95 is to be preferred since the polarization is more stable against small variations of P eff. Furthermore, a negative value of P eff gives yet another enhancement of the rate [7] as also indicated in the denominator of Eq.(5) and in the rate formula (7). 1.0 0.95 0.5 0.75 0.5 0.25 h 0.0 0 0.25 0.5 0.5 0.75 0.95 1.0 1.0 0.5 0.0 0.5 1.0 h Figure 2: Contour plot in (h +,h ) plane 4 Stability of polarization against variations of P eff Extrapolationsof P away fromp eff = ±1 aremore stablefor P eff = 1 thanforp eff = +1. Take, for example, the magnitude of the top quark polarization at threshold Eq. (5) and differentiate it w.r.t. P eff at P eff = ±1. One finds d P thresh dp eff = ± 1±A LR 1 A LR. (10) For P eff = 1 one has a slope of (1 A LR )/(1 + A LR ) = 0.42 while one has a much larger positive slope of (1+A LR )/(1 A LR ) = +2.38 for P eff = +1. This feature persists at higher energies [7]. 5

5 Longitudinal and transverse polarization P (l) vs. P (tr) for general energies In Figs. 3 and 4 we plot the longitudinal component P (l) and the transverse component P (tr) of the top quark polarization for different scattering angles θ and energies s starting from threshold up to the high energy limit. P (tr) is the transverse polarization component perpendicular tothemomentumofthetopquarkinthescattering plane. Fig.3isdrawnfor P eff = ( 1, 0.95) and Fig. 4 for P eff = (+1,+0.95). The apex of the polarization vector P follows a trajectory that starts at P = P thresh ( cosθ,sinθ) and P = P thresh (cosθ, sinθ) for negative and positive values of P eff, respectively, and ends on the line P (tr) = 0. The two 60 trajectories for 60 show that large values of the size of the polarization P close to the maximal value of 1 can be achieved in the forward region for both P eff 1 and at all energies. However, the two figures also show that the option P eff 1 has to be preferred since the P eff = 1 polarization is more stable against variations of P eff whereas the polarization in Fig. 4 has changed considerably when going fromp eff = 1 to P eff = 0.95. The plots Figs. 3 and 4 are drawn for NLO QCD. At NLO there is also a normal component P (n) generated by the one loop contribution which, however, is quite small (of O(3%)). 6 Summary The aim of the investigation in [7] was to maximize and to minimize the polarization vector of the top quark P = P (P eff, s,cosθ) by tuning the beam polarization. Let us summarize our findings. A. Maximal polarization Large values of P can be realized for Peff ±1 at all intermediate energies. This is particularly true in the forward region where the rate is highest. Negative large values for P eff with aligned beam helicities (h h + neg.) are preferred for two reasons. First there is a further gain in rate apart from the helicity alignment factor (1 h h + ) due to the fact that generally σ LR > σ RL as explained after (8). Second, the polarization is more stable against variations of P eff. B. Minimal polarization Close to zero values of the polarization vector P can be achieved for P eff 0.4. Again the forward region is favoured. In order to maximize the rate for the small polarization choice take quadrant IV in the (h, h + ) plane. Acknowledgements: J.G.K. would like to thank X. Artru and E. Christova for discussions and G. Moortgat-Pick for encouragement. We thank B. Melić and S. Prelovsek for their participation in this project. The work of S. G. is supported by the Estonian target financed project No. 0180056s09, by the Estonian Science Foundation under grant No. 8769 and by the Deutsche Forschungsgemeinschaft (DFG) under grant 436 EST 17/1/06. 6

References [1] E. Christova and D. Draganov, Phys. Lett. B 434 (1998) 373 [2] M. Fischer, S. Groote, J. G. Körner, M. C. Mauser and B. Lampe, Phys. Lett. B 451 (1999) 406 [3] M. Fischer, S. Groote, J. G.Körner andm. C. Mauser, Phys. Rev. D65 (2002)054036 [4] S. Groote, W. S. Huo, A. Kadeer and J. G. Körner, Phys. Rev. D 76 (2007) 014012 [5] J. A. Aguilar-Saavedra and J. Bernabeu, Nucl. Phys. B 840 (2010) 349 [6] J. Drobnak, S. Fajfer and J. F. Kamenik, Phys. Rev. D 82 (2010) 114008 [7] S. Groote, J. G. Körner, B. Melić and S. Prelovsek, Phys. Rev. D 83 (2011) 054018 [8] X. Artru, M. Elchikh, J. -M. Richard, J. Soffer and O. V. Teryaev, Phys. Rept. 470 (2009) 1 [9] G. Alexander, J. Barley, Y. Batygin, S. Berridge, V. Bharadwaj, G. Bower, W. Bugg and F. J. Decker et al., Nucl. Instrum. Meth. A 610 (2009) 451 7

Figure 3: Parametric plot of the orientation and the length of the polarization vector in dependence on the c.m. energy s for values θ = 60, 90, 120, and 150 for P eff = 1 (solid lines) and P eff = 0.95 (dashed lines). The three tics on the trajectories stand for s = 500GeV, 1000GeV, and 3000GeV. Figure 4: Same as Fig.3 but for P eff = +1 (solid lines) and P eff = +0.95 (dashed lines). 8