Updating to Test Universe 3.0 What s new?
Test Universe 3.0 An overview of the new features This brochure provides you with information on the following new features in our Test Universe software for CMC testing equipment: Revised user interface...4 New time synchronization options...5 Extended PQ Signal Generator functionality...6 Extensions in the Annunciation Checker module...7 Support for the USB interface...8 Other new features...9 When placing new orders for CMC test sets with PC operation, Test Universe 3.0 will be supplied as standard from October 2013 onwards. We invite users running Test Universe 2.xx to update their existing software to this version. The update process is both fast and free-of-charge. You can find more information on this on page 10. You can also find information on our other new products in and around the field of protection and measurement equipment testing on page 11. Download your free-of-charge update from our recently redesigned customer area now, so that you can enjoy all the new functions. Dr. Peter Meinhardt Test Universe product manager 3
Revised user interface Our CMC 56, which we launched in 1990, was the first testing device for protective relays with which the test variables were displayed in a vector diagram on the PC, where they could be directly set. This marked the beginning of our quest to continually develop new features for our devices and to make testing more convenient for users. In line with this tradition, Test Universe 3.0 has been given a fresh new look and feel. The user interface is more intuitive thanks to the new menu concept. The so-called tool tips have been updated with more details to provide you with fast assistance, should you have questions on any individual functions. New tutorial videos provide step-by-step instructions on how to use Test Universe. The screen contents can be freely arranged in line with your personal requirements, which can prove extremely useful, particularly when working on small laptop screens. 4
New time synchronization options The topic of testing a line differential protection system via GPS receiver was already addressed at the very first OMICRON User Convention in 1993. Since this time, we have not only offered the necessary hardware and software functionalities for time-synchronized testing in the field of protection engineering, but also the accompanying accessories. From version 3.0 onwards, Test Universe supports our new GPS-controlled CMGPS 588 synchronization unit with integrated antenna. The device operates as a PTP Grandmaster Clock in line with IEEE 1588-2008 / IEEE C37.238-2011 and is ideally suited for synchronizing starting times when testing with two or more CMC test devices, as well as making measured value recordings with real-time stamps. However, it can of course also be synchronized with other PTP sources already present on site. 5
Extended PQ Signal Generator functionality The PQ Signal Generator software module turns a CMC testing device into a signal source for generating all kinds of mains interference as per IEC 61000-4-30 (-7, -15). The functionality of this module has once again been significantly extended with the new version of Test Universe. It makes the CMC the first commercial product to also provide easy support for the stringent testing in line with IEC 62586. This new standard prescribes test signals with which multiple power quality phenomena are simulated at the same time. An extensive testing library, consisting of 12 different OMICRON Control Center (OCC) files, is available to provide support in performing the type tests required by these standards. 6
Extensions in the Annunciation Checker module The Annunciation Checker module offers commissioning engineers effective support when testing the assignment of the various message types (static messages, shot-triggered messages, etc.) from the source to the corresponding message locations (e.g. control centers). It also helps to check if the wiring has been connected correctly. Test Universe 3.0 also allows users to copy message types which have already been defined for use as templates. This makes setting up test sequences faster and even more convenient. Once a test has been defined (e.g. for bay 1), this can then simply be copied and applied to other applications (e.g. for bays 2 to 20). Tests which involve the control station or other areas can then be performed at very high quality with minimum input time. 7
CMC device control via USB USB interface One of our very first innovations was to allow users to control CMC testing devices from their PC via the parallel printer interface. After a few years, this was then superseded by the Ethernet interface. USB interfaces are now also well suited to handling communication between a PC and CMC device. From Test Universe 3.0 onwards, we therefore support USB interface connections with our CMC testing devices. Many users will certainly appreciate having this user-friendly interface available as an alternative. 1 New orders New CMC testing devices supplied with Test Universe 3.0 2 can also be controlled via the USB interface as standard. Orders placed since the end of 2012 All CMC testing devices 2 delivered since November 2012 already include the latest processor board with additional USB interface (NET-1C). All that users need to do in order to use this interface is perform the free-of-charge software update to version 3.0 (see page 10). Retrofitting Older CMC testing devices 2 can be retrofitted with a new processor board (NET-1C upgrade), so that they can also use a USB interface. If you are interested in this, please get in touch with us (see page 10). 1 Although Ethernet-based network connections offer many advantages, they are more complex and often require significant IT expertise during installation (firewall, IP addresses, etc.). 2 CMC 356, CMC 256plus and CMC 353. Can also be retrofitted to the CMC 256-6. 8
Other new features OCC Batch OCC Batch is a tool which allows multiple OCC documents to be executed automatically one after the other in the correct sequence. This offers handling advantages over large individual OCC documents. AUX DC configuration Control of the DC auxiliary voltage output can now also be embedded in an OCC document as a module, from which values can then be automatically adjusted and set. New icons Thanks to graphical revisions, the module icons are now easier to recognize on the screen and distinguish from one another (testing modules, configuration modules, testing tools). Windows 8 compatible In addition to the Windows versions previously supported, Test Universe 3.0 has been developed and tested to ensure compatibility with Windows 8 (32 bit/x86 and 64 bit/x64). Besides the new features already described, version 3.0 also includes a large number of smaller modifications and bug fixes. 9
Now is the ideal time to make the switch to Test Universe 3.0 The update to version 3.0 is free-of-charge for users of Test Universe software version 2.xx. So why not perform the update right away? Then you can benefit from the many new features and improvements. How to get version 3.0 The fastest and easiest way to get version 3.0 is to download it: Simply navigate to the OMICRON website at www.omicron.at, log in to the customer area, and then select Software Downloads. Now choose Test Universe (TU) Software 3.00 and then install the software over your existing version 2.xx. That's it! Should downloading the installer file not be an option for you, we would be happy to send you the latest version of the Test Universe software on DVD. If you would like to request an installation DVD, please fill out and return the order form in the customer area of our website. How to get the most out of the new version When you launch the software, the start screen includes a button entitled Tutorials, via which you can call up a series of short videos. These explain the use of the new software in easy-to-understand steps. The software's start screen also grants you fast and easy access to the online help pages, as well as the system manuals in PDF format. Do you still have questions? We would be more than happy to assist you at any time, either in person or via the customer area on our website. You can also find details regarding our comprehensive support services and training offers on our website under SUPPORT. 10
Other new products in and around the field of protection and measurement equipment testing DANEO 400 ISIO 200 CMGPS 588 Distributed hybrid signal analyzer for power utility automation systems Versatile binary I/O terminal with IEC 61850 GOOSE interface Antenna-integrated GPS controlled time reference for CMC test sets CMControl P App CMC 310 ADMO V2.20 Convenient software for operating CMC testing devices via Android tablets Three-phase testing device for protection and measurement systems at a particularly attractive price Maintenance management software for protection systems with extended functionality Please visit our redesigned website at www.omicron.at or www.omicronusa.com for detailed information on these products. 11
OMICRON is an international company that provides innovative testing and diagnostic solutions for electrical power supply systems. The use of OMICRON products offers the greatest reliability in evaluating the status of primary and secondary technical equipment. Comprehensive services in the areas of consulting, commissioning, testing, diagnostics, and training are an integral part of OMICRON s service offering. Customers in over 140 countries benefit from the company's ability to harness the latest technologies in top-quality products. Service centers on every continent also provide a broad range of application knowledge/expertise and first-class customer support. All of this, coupled with a powerful network of sales partners, has helped OMICRON establish itself as a market leader in the field of electrical power engineering. You can find detailed product information and contact details for our worldwide offices on our website. www.omicron.at www.omicronusa.com OMICRON L2250, September 2013 Subject to change without any notice