OPERATING LIMITS Useful volume up to : L 9 L Ambient temperature : to + C Max.fluid temperature : + C* passing blade at : mm Ø Inlet dia. : mm DN Ø Outlet dia. : / Ø Vent dia.: mm Ø Cable passage : mm * (+ C for min) SIR 9- INTERMEDIATE LIFTING STATIONS Communal waste water Hz 9 Hmt ppe L L 9 L 9 L APPLICATIONS Lifting of muddied waste water containing faecal matter, industrial effluent, water containing fibre, tissue, straw, non metallic particles, sludge, rainwater or greasy wastewater from kitchens, wherever the discharge level is situated below the level of the sewer, or for transferring water to a distant or elevated treatment works. industrial sites, farms, slaughter-houses, sports complexes, h o t e l s, restaurant kitchens, camp sites, small rural communities, housing estates. AdVANTAGES 9 with cover Completely sealed below the level of the inlet channel. No holes in the bottom part of the tank. Unbreakable tank, unaffected by acidic mixtures, bases, oil, milk or hydrocarbons. Designed to resist to water pressure in the event of flooding thanks to its stabilising fins. Standard version: or grinding pumps. pump version allowing automatic backup in the event of breakdown of one of the pumps;cascade type operation of pumps in the event of increased flow. Ecological, mercury free floaters, pear shaped to avoid snagging paper, fibre, fabric, etc. ; or air pressure switch Lockable cover (protection of people). Vent opening allowing the fitting of a carbon filter (not supplied). Height of tank can be adjusted by adding an extension piece (plus replacement gasket not supplied) or by cutting back the specially designed upper section. System allowing rapid installation and removal of pump(s)by means of a positioning flange and a stainless steel chain. Extension piece 9 (cut-away section) N.T. No -/ENG. - Ed. /-
SIR 9- DESIGN Lifting stations comprising - circular concave-bottomed tank with stabilising fins and lifting rings, - cover with stainless steel safety locks (designed to resist foot traffic loading of dan), - or type SDLi pumps: to, kw V single-phase or V three-phase, Hz (see special SDLI notice), - Stainless steel discharge pipework with /, DIN ISO /-G/ (DIN 999) threads, - ball valve, plug valve and stainless steel lifting chain per pump, - float support and: pump : - NIVOSTABLE floats ; or I.P.A.E. - a Yn or YN E control box - fault management board. STATION IDENTIFICATION SINGLE PUMP VERSION : Intermediate lifting station 9 L tank pump Type of pump 9 / SDLi-.T PRINCIPLE OF INSTALLATION SINGLE OR DOUBLE PUMP VERSION: Intermediate lifting station L tank or pumps Type of pump(s) / SDLi-.T atelier pumps : - NIVOSTABLE floats ; or I.P.A.E. - a Yn or YN E control box, - fault management board. possibilities of connection to inlet pipe for 9 Nom dia.; possibilities for Nom dia.. - Comply with EN ; EN -; EN -. STANDARD CONSTRUCTION Standard material : MDPE mm Medium Density Polyethylene station épuration Relevage - assainissement Modules eaux chargées
SIR 9- STATIONS DESCRIPTION 9 9 - double pump version Tank. Central support. Fixed nom. dia. coupling Non-return valve. Isolating valve. Tee adapter plug Tee adapter for attaching rinsing hose. Support bar. 9 Lifting chain. Chain support. Gasket. Stainless steel discharge pipe (). Stainless steel discharge pipe (). SDLI pump(s). Cover Floats. 9
SIR 9- INTERMEDIATE LIFTING STATION SELECTION CHART inhabitants Equivalent equivalent habitants 99 Number Nombre of de lodgings logements The following values are generally deemed to apply : l/head/day for lower class rural housing l/head/day for higher class rural housing l/head/day for small middle class communities l/head/day for small towns of more than inhabitants l/head/day for small towns of more than inhabitants l/head/day for small towns of more than inhabitants. A B C,,,,,,,,, Volume use utile in en m m A = starting/h démarrages/h B = starting/h démarrages/h C = démarrages/h starting/h 9 L/Head/day L/équ./j L/Head/day L/équ./j L/Head/day L/équ./j L/Head/day L/équ./j L/Head/day L/équ./j L/Head/day L/équ./j HYDRAULIc PERFORMANCES Hm Imp.gpm SDL i /,T SDL i /,T SDL i /,T SDL i /,T SDL i /,T SDL - i Hz Hft Hydraulic perfomances at 9 rpm for a pump in operation. Take into account the loss of head due to : pipes, bends, valves, f l a p s SDL i /,T P kw Qm /h SDL i /,T SDL i /,T SDL i /,T SDL i /,T SDL i /,T SDL i /,T Ql/min Ql/s Relevage - assainissement Modules eaux chargées
SIR 9- DIMENSIONS 9 Yn boxes Yn (single pump version) Yn (double pump version). Supplied with the module. Functions Ensures fully automated operation of the station and thermal protection of the pumps : - direct start-up, - automatic pump switching (Yn ), - Integrated sound alarm and fault relay. Control panel Front panel features - General safety switch. - Indicator lights : power on, pump running, fault (pump), direction of rotation detector. - way switch: temporary manual operation, stop, automatic. - single pump version Dimensions Yn Yn Height mm mm Length mm mm Depth mm mm Mass, kg,9 kg Protection IP IP See special Yn information sheet.
SIR 9- ELECTRICAL DATA AND DIMENSIONS - double pump version FEATURES a) Electrical - volt single/ volt -phase Hz, - Motor protection by means of Yn or Yn box. b) Installation - The box must be installed in a room or externally under an accessible, rigid, water-tight vandal-proof enclosure. - The station is designed to be able to be placed in green areas. Provide a safety barrier around the cover. Comply with applicable standards when installing the station within a roadway or pavement,and provide an inspection pit with a high strength manhole cover. Recommendation Provide a sand trap before the station inlet where effluent contains a lot of sand and heavy particles, and a grease trap where the water is greasy. c) Packaging - Station delivered on pallets ready for installation, together with instructions for putting into operation. One pallet with the station, the other with the control box and the pumps(s) and accessories. REFERENCE Tension Supply ORDER REFERENCE COMMANDE aliment. voltage Motor P. Intensité Abs. Effluents Nominal Nominal Ø p. moteur rating current abs. inlet entrée Ø outlet sortieø Masse Vent évent Ø câble cable V kw A DN ND DN ND mm mm kg 9/SDLI-T x, / 9/SDLI-,M x, 9, /, 9/SDLI-,T x,, / 9/SDLI-,T x,, / 9/SDLI-,T x,, / 9/SDLI-,T x,, / 9/SDLI-,T x,, / /SDLI-T x, / /SDLI-,M x, 9, /, /SDLI-,T x,, / /SDLI-,T x,, / /SDLI-,T x,, / /SDLI-,T x,, / /SDLI-,T x,, / /SDLI-T x x, / /SDLI-,M x, x9, /, /SDLI,T x, x, / /SDLI-,T x, x, / 9 /SDLI-,T x, x, / /SDLI-,T x, x, / /SDLI-,T x, x, / d) Maintenance - Replacement of spare pump parts or kits containing a number of spare parts : - Mechanical seal kit, please contact us. additional order reference numbers Yn : Current range in A Control box reference Yn PUMP Yn PUMPS, to (Yn) (Yn), to (Yn) (Yn) - I.P.A.E : 99-99 - 99 (+YN E) - NIVOSTABLE (m) : 9 - Fault management board for connection of sensors per pump : OPTIONS and recommended accessories Flexible connection (not supplied). Carbon filter (not supplied). Replacement gasket (not supplied). Tank extension piece :. Relevage - assainissement Modules eaux chargées