Grease disposal concepts. Grease separators. For full and partial disposal For free-standing or ground installation

Transcription

1 Grease separators Grease disposal concepts Grease separators For full and partial disposal For free-standing or ground installation

2 Selecting the correct separator Areas of application Hotels Restaurants Food serving areas Refectories Motorway service stations Canteens Butchers shops Slaughterhouses (large slaughtering operations) Meat and sausage factories Animal carcass processors Hospital kitchens Food preserving factories Cooking-oil refineries Ready-made meals producers Barbecue, frying and grilling kitchens Chips and crisp production Peanut roasters 2 Applications Commercial operations generating wastewater must implement appropriate measures, by using suitable pre-treatment installations, to ensure that solids and liquids which can give off toxic and unpleasant vapours and odours are prevented from damaging construction materials and drainage facilities, harming operations, and are held back so that they do not enter sewage pipes. Operations generating greasy wastewater have a mandatory obligation to install EN 1825 type grease separators to ensure that grease and organic oil is effectively removed from the wastewater. This applies for instance to kitchens and meat-processing operations. It is mandatory for every grease separator installed below the backflow level (usually corresponding to street level) to have a downstream twin lifting plant or complete pumping station. Each industry and commercial operation places individual demands on the capacity of grease separators, lifting plant and complete piping stations. Customisation therefore requires adaptable products in a wide range of sizes and materials. ACO Building Services has many decades of experience in supplying the most diverse range of grease separators, lifting plants and complete pumping stations for ground installation and free-standing installation. Die Normen und Prüfungen All ACO Building Services grease separators are manufactured in accordance with EN 1825 standard. All of the grease separators in the product line are hydraulically tested and have General Building Supervisory Authority Authorisation and/or the new Application Authorisation from DIBt Berlin. The separators also undergo regular inspection by the Bavarian Factory Inspectorate which inspects the grease separator production to ensure it complies with the latest testing standards.

3 Wastewater Wastewater Animal and vegetable fats/oil Animal and vegetable fats/oil Light liquid/oil Light-oil separators Dimensioning Dimensioning Dimensioning based on: Dimensioning based on: Number of meals per Number of meals per day or day or Number and type of food Number and type of food Influencing factors are: Influencing factors are: Temperature of the Temperature wastewater of the wastewater Density of the fat Density of the fat Use of cleaning products Use of cleaning products Dimensioning forms available from: Te l Dimensioning based on: Dimensioning based on: Type of workplace Type (filling of workplace station, car wash, (filling station, car wash, workshop etc.) workshop Wastewater etc.) volume (rainwater or brown water) Wastewater volume (rainwater or brown water) Pieces of cleaning equipment Pieces of cleaning equipment Influencing factors are: Influencing factors are: Type and density of the Type medium and density of the medium Dirt content (high/low) Dirt content (high/low) Installation Installation situation 3 Free-standing Free-standing Polyethylene Polyethylene: Eco-Mobil Eco-Mobil Eco-Jet Eco-Jet Hydrojet Hydrojet Stainless steel Stainless Lipu-Mobil steel Lipu-Mobil Lipurex Lipurex Lipurat Lipurat Lipator Lipator Lipatomat Lipatomat Ground installation Ground installation Polyethylene Material Lipumax polyethylene: P Eco-FPI Lipumax P-D Lipumax P-DM Lipumax P-DA Free-standing Free-standing Stainless steel Stainless steel: Coalisator-R, -RD Coalisator-R, -RD Cast iron Cast iron: Curator-GG Curator-GG Coalisator-GG Coalisator-GG Ground installation Ground installation Cast iron Cast Curator-GG iron: Curator-GG Coalisator-GG Coalisator-GG Polyethylene Oleopator P Oleopass P! 1. If the resting water level lies below the backflow level (generally corresponding to street level), there is a mandatory obligation to install active backflow safety valves (Lifting plant or pumping station). 2. Caution: ground : installation: To avoid additional costs and unnecessary co-ordination work, we recommend which comply with the specified structural load without additional reinforcing (e.g. load distribution slabs) for example Oleomax, Oleopator and Eco-FPI. 3. Caution: free-standing installation of grease separators: We recommend installing stainless steel separators when the operational temperatures in the separator > 60 C or when the separator is installed in a fire-risk zone.

4 Grease separators for full disposal Full disposal A grease separator for full disposal operates purely physically on the basis of gravity (density differences), i.e. heavy wastewater constituents sink to the floor of the separator, light substances such as animal fats and oils, rise to the top of the grease separator. The treated wastewater is discharged into the sewers via a drainage outlet pipe.... for free-standing installation The sludge trap and the separator must be completely emptied and cleaned at least once a month pursuant to DIN Emptying the sludge trap and the separator is carried out by a disposal company and it is recommended that this operation be carried out every two weeks. The separator then has to be refilled with water (e.g. drinking water or process water) in compliance with the local water regulations. Extension stages All gravity grease separators require periodic maintenance to remove the fats, oils and grease (FOGs) together with sludge deposits. Such maintenance is usually undertaken by a specialist waste contractor. A system of extension stages for grease separators enables the reduction of odor during disposal and cleaning. The higher the extension stage, the more comfortable disposal and cleaning of the separator can be accomplished. The available extension stages and the respective comfort for disposal and cleaning are described in the table below. 4 Basic version Extension stage 1 Extension stage 2 Extension stage 3 Dipsosal via inspection covers With connection for direct suction With connection for direct suction With internal high pressure cleaning (manual operation) With filling device (manual) Disposal pump (option) With connection for direct suction With internal high pressure cleaning (automated operation) With filling device (automated) Disposal pump (option) Occurrence of odour during disposal and cleaning Disposal can be done without opening of the covers. Occurrence of odour is likely during cleaning of the tank. No odour during disposal and cleaning. Filling device, high pressure spray head and disposal pump are manually operated. No odour during disposal and cleaning. Filling device, high pressure spray head and disposal pump are operated automatically.

5 ... for ground installation Product stability guaranteed for 50 years Certified statics have been calculated for the tank system The new tank system supplies structural stability for 50 years Protection against maximum ground water level Depending on the maximum allowed inlet invert, the separators can be installed in areas with maximum ground water until the ground level surface It is not necessary to cast an extensive upwelling protection on site Flexible application Load class A: walkable courtyards, open space Load class B: drivable for cars driveways, parking areas Load class D: drivable for lorries petrol stations, service entrances Structural stability Protection against upwelling Available for load class A, B or D Basic version Extension stage 1 Extension stage 2 Extension stage 3 5 Dipsosal via manhole cover With connection for direct suction With connection for direct suction With internal high pressure cleaning (manual operation) With filling device (manual) With connection for direct suction With internal high pressure cleaning (automated operation) With filling device (automated) Occurrence of odour during disposal and cleaning Disposal can be done without opening of the cover. Occurrence of odour is likely during cleaning of the tank. No odour during disposal and cleaning. Filling device, high pressure spray head and disposal are manually operated from inside of the building. No odour during disposal and cleaning. Filling device, high pressure spray head disposal are operated automatically. Remote control enables operation without entering of the building.

6 Materials and models POLYETHYLENE Very durable Polyethylene has excellent corrosion-resistance properties Recycling Polyethylene is environmentallyfriendly and reusable! Maintenance Cleaning is simple thanks to the smooth wax-like surface. Transport Low weight for easy transport and installation! STAINLESS STEEL Fire protection Stainless steel is completely inflammable and therefore presents zero fire-risk. It is also very temperature-resistant. Strength Stainless steel has very high levels of mechanical strength and is therefore vandal-proof. Hygiene Stainless steel has been used for many decades in all applications specifying strict hygiene regulations (e.g. hospitals). Chemical resistance Stainless steel is extremely resistant to organic substances. 6 OVAL MODEL The container dimensions of the oval grease separators made of polyethylene and stainless steel have been optimised to maximise ease of access in awkward situations. This means they can be easily carried into areas via narrow stairs and door openings. NS 1-4: max. width 800 mm -10: max. width 1050 mm ROUND MODELS The round grease separator models made of stainless steel or polyethylene can be dismantled into separate components. This design also means that the nominal size can be enlarged on site by simply replacing the middle components (e.g. replacing NS 7 with NS 10). Number of separate components: -4: 2 components; Ø 1000 mm NS 7-10: 3 components; Ø 1500 mm NS 15-20: 3 components; Ø 1750 mm SPLIT DESIGN This product line is made of polyethylene and is specially designed for remediation projects with very narrow access routes. The separator can be split into three parts. Maximum segment dimensions (LxWxH): NS2 : 670 x 700 x 1360 mm NS4 : 1140 x 700 x 1360 mm

7 Grease separators for partial disposal Grease separators for partial disposal (Fresh grease separators) Grease separators working on the partial disposal principle also operate purely physically on the basis of gravity (density differences), i.e. heavy wastewater con-stituents sink to the floor of the separator, whilst light substances such as animal oils and fats rise to the top of the separator. The separated substances (grease and sludge) are collected in separate containers. The treated wastewater is then discharged into the sewers via the drainage outlet pipe. Partial disposal (Fresh grease disposal) Draining the separated substances from the grease separator into the collecting drums is done by opening the relevant drainage valve on the separator (specifics depend on the type of operation). This can be undertaken independently of normal operations. For example, it can be done without interrupting the work being carried out in a kitchen. Because the collecting drums only take up grease and sludge, the grease separator does not have to be filled after disposal with expensive fresh water. Lipator: Grease separator for partial disposal with manual operation. Lipatomat: Grease separator for partial disposal with automatic program control. Partial disposal concept ACO Building Services provides two types of grease separator for partial disposal: grease separators for manual, or automatic partial disposal. Both of these versions are only available for free-standing installation. The grease separators for manual partial disposal (LIPATOR) have mechanical drainage valves. These must be opened several times a day as required by the operator (after heating up first). The transparent hoses reveal whether all of the substances collected at any given time have completely drained into the drums. The grease separators with automatic partial disposal (LIPATOMAT) have electrically actuated ball valves. A programme control automatically activates the pre-heating and opens the valves. An optical and acoustic warning signal is activated when the collecting drums are full. Full drums are simply replaced and collected by a disposal company. 7

8 ACO Grease separator Lipumax P-B Basic model Grease separator of polyethylene for below ground installation according to EN 1825 and DIN certificate a (, ) () (NS 7) (NS 8.5, NS 10) inlet and outlet connection according to outside diameter D depending on nominal size of separator disposal and cleaning via cover Lipumax P-B Order data Installation example shows ACO Lipumax P-B with a top section unit for load class B H1 H2 ØD 30 H inlet DN DN outlet DN Ø1320 Accessories sampling pots and extension elements, page 28 grease level sensor, page 28 NS inlet/outlet connection Sludge trap Grease storage volume Total D H H1 H2 Weight Article number [l] [l] [l] [mm] [mm] [mm] [mm] [kg] DN DN DN DN DN DN NS 7 DN NS 8.5 DN NS 10 DN

9 Top section load class A 15 Order data T Ø600 load class A 15 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class B 125 Order data T Ø620 load class B 125 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class D 400 Order data T Ø620 load distribution plate distibution (optional) plate (option) load class D 400 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene selectively with load distribution plate from concrete Ø 1500 mm x 200 mm ØD T [mm] without load distribution plate T [mm] with load distribution plate ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No

10 ACO Grease separator Lipumax P-D Extension stage 1 Grease separator of polyethylene for below ground installation according to EN 1825 and DIN certificate a (, ) () (NS 7) (NS 8.5) (NS 10) inlet and outlet connection according to outside diameter D depending on nominal size of separator disposal via direct suction line DN 65, PN 10, counter flange and Storz-75 B hose quick coupling and blind cover cleaning via cover Installation example shows ACO Lipumax P-D NS 4 with a top section unit for load class B 125 Lipumax P-D Order data ØD 10 H1 H2 H3 H 30 inlet DN DN outlet DN 20 Ø1320 suction extraction device DN65 DN65 Accessories sampling pots and extension elements, page 28 grease level sensor, page 28 NS inlet/outlet connection Sludge trap Grease storage volume Total D H H1 H2 H3 Weight Article No. [l] [l] [l] [mm] [mm] [mm] [mm] [mm] [kg] DN DN DN DN DN DN NS 7 DN NS 8.5 DN NS 10 DN

11 Top section load class A 15 Order data T Ø600 load class A 15 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class B 125 Order data T Ø620 load class B 125 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class D 400 Order data T Ø620 load distribution plate distibution (optional) plate (option) load class D 400 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene selectively with load distribution plate from concrete Ø 1500 mm x 200 mm ØD T [mm] without load distribution plate T [mm] with load distribution plate ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No

12 ACO Grease separator Lipumax P-DM Extension stage 2 Grease separator of polyethylene for below ground installation according to EN 1825, DIN certificate a (, ) () (NS 7) (NS 8.5) (NS 10) inlet and outlet connection according to outside diameter D depending on nominal size of separator disposal via direct suction line DN 65, PN 10, counter flange and Storz-75 B hose quick coupling and blind cover filling device ¾ with manual operated ball valve to be installed inside a building with cold water supply high pressure internal cleaning high-pressure pump with storage tank to be installed inside a building with cold water supply manual controlled disposal nominal pressure: 175 bar flow rate: 13 litre/minute electrical connection: 400 V/ 50 Hz/16 A/3,9 kw Installation example shows ACO Lipumax P-DM with a top section unit for load class B 125 Lipumax P-DM Order data 12 H H3 H1 ØD H2 30 inlet DN 20 high pressure cleaning possibilities for filling outlet DN Ø1320 Accessories sampling pots and extension elements, page 28 grease level sensor, page 28 suction extraction device DN65 DN65 high-pressure hose (on request) Note! Always required for Lipumax P-DM. NS inlet/outlet connection Sludge trap Grease storage volume Total D H H1 H2 H3 Weight Article No. [l] [l] [l] [mm] [mm] [mm] [mm] [mm] [kg] DN DN DN DN DN DN NS 7 DN NS 8.5 DN NS 10 DN

13 Top section load class A 15 Order data T Ø600 load class A 15 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class B 125 Order data T Ø620 load class B 125 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class D 400 Order data T Ø620 load distribution plate distibution (optional) plate (option) load class D 400 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene selectively with load distribution plate from concrete Ø 1500 mm x 200 mm ØD T [mm] without load distribution plate T [mm] with load distribution plate ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No

14 ACO Grease separator Lipumax P-DA Extension stage 3 Grease separator of polyethylene for below ground installation according to EN 1825, DIN certificate a (, ) () (NS 7) (NS 8.5) (NS 10) inlet and outlet connection according to outside diameter D depending on nominal size of separator disposal via direct suction line DN 65, PN 10, counter flange and Storz-75 B hose quick coupling and blind cover filling device ¾ with solenoid valve to be installed inside a building with cold water supply high pressure internal cleaning high-pressure pump with storage tank to be installed inside a building with cold water supply automatic program controlled disposal via remote control nominal pressure: 175 bar flow rate: 13 litre/minute electrical connection: 400 V/ 50 Hz/16 A/3,9 kw Installation example shows ACO Lipumax P-DA with a top section unit for load class B 125 Lipumax P-DA Order data 14 H H3 H1 ØD H2 30 DN inlet DN 20 high pressure cleaning possibilities for filling outlet DN Ø1320 Accessories sampling pots and extension elements, page 28 grease level sensor, page 28 suction extraction device DN65 DN65 high-pressure hose (on request) Note! Always required for Lipumax P-DA. NS inlet/outlet connection Sludge trap Grease storage volume Total D H H1 H2 H3 Weight Article No. [l] [l] [l] [mm] [mm] [mm] [mm] [mm] [kg] DN DN DN DN DN DN NS 7 DN NS 8.5 DN NS 10 DN

15 Top section load class A 15 Order data T Ø600 load class A 15 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class B 125 Order data T Ø620 load class B 125 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene (only included with top section and ) ØD T [mm] ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No Top section load class D 400 Order data T Ø620 load distribution plate distibution (optional) plate (option) load class D 400 according to EN 124 frame from concrete, cover from cast iron clear opening Ø 600 mm cover odour proof sealed adapter plate from concrete Ø 1000 mm x 150 mm raising tube from polyethylene selectively with load distribution plate from concrete Ø 1500 mm x 200 mm ØD T [mm] without load distribution plate T [mm] with load distribution plate ST 200 ST 800 ST 550 ST 1100 NS 7 ST 700 NS 8.5 ST 850 NS 10 ST 1000 Weight [kg] Article No

16 Eco-Jet-G split-design grease separators for free-standing installation Areas of application The Eco-Jet-G grease separators made of polyethylene are installed inside buildings in rooms protected from frost. The split-design is especially practical for remediation projects with narrow access routes. The grease separators in the Eco-Jet-G product line can also be equipped with a filling unit. German Building Supervisory Authority Authorisation Z Product advantages Very useful in applications with narrow access routes because can be split into three parts. Easy to transport and assemble. The figure shows nominal size 4 the sampling pipe must be ordered separately. maintenance opening inlet DN 100 outlet DN Ø 110 min 500 a b L 1 L Container dimensions NS Sludge trap Contents Dimensions in mm Weight Grease storage volume Total L1 L2 a b empty full Article No Accessories: Filling unit Article No Sampling pipe...page 29 Lifting plant...page 31

17 Eco-Jet-GD split-design grease separators for free-standing installation with direct suction extraction Areas of application: The Eco-Jet-GD grease separators made of polyethylene are installed inside buildings in rooms protected from frost. The grease separator can be emptied with the DN 50 direct suction pipe. The split-design is especially practical for remediation projects with narrow access routes. The grease separators in the Eco-Jet -GD product line can also be equipped with a filling unit. German Building Supervisory Authority Authorisation Z min 500 disposal connection with Storz-B-coupling R 2 DIN Product advantages Very useful in applications with narrow access routes because can be split into three parts. Easy to transport and assemble. Integrated suction extraction pipe to reduce odour-emissions during disposal. maintenance opening The figure shows nominal size 4 the sampling pipe and the lifting plant must be ordered separately. inlet DN 100 outlet DN Ø 110 a b L 1 L Container dimensions NS Sludge trap Contents Dimensions in mm Weight Grease storage volume Total L1 L2 a b empty full Article No Accessories: Filling unit Article No Sampling pipe...page 29 Lifting plant...page 31

18 Eco-Jet and Hydrojet oval grease separators made of polyethylene for free-standing installation 18 The figure shows the Hydrojet-OAE NS4 sampling pipe and lifting plant must be ordered separately. opening Maintenance Ventilation Ventilation Dimensions All types Ventilation fire hose quick coupling B R 2 ½, DN Maintenance opening Ventilation Maintenance opening Areas of application The Eco-Jet-O/Hydrojet-O grease separators made of polyethylene are installed inside buildings in rooms protected from frost. The grease separators are available in various extension stages. The higher extension stages make it easier to clean the tank and dispose of the contents, and reduce the related odour emissions. Retrofitting on site with different extension stages is quick and easy. German Building Supervisory Authority Authorisation Z Extension dimensions Filling device with ball valve and pressure reduction valve (Option for O and OD) All types Filling device with ball valve and pressure reduction valve fire hose quick coupling B except O (Option for O and OD) R 2 ½, DN Inspection window with wiper Filling device with ball valve (Option for O and and pressure reduction valve fire OD) hose quick coupling B Maintenance Inspection (Option for O and OD) R 2 ½, DN opening window with wiper (Option for O and OD) Inspection window with wiper (Option for O and OD) Filling device with ball valve Filling device with ball valve and pressure reduction valve fire hose quick coupling B Maintenance (Option for O and OD) R 2 ½, DN and pressure reduction valve fire hose quick coupling B opening (Option for O and OD) R 2 ½, DN Ventilation Connecting Inspection heating hod (Option for window all types) with Connecting wiper heating hod (Option for O (Option and OD) for all types) Connecting heating hod (Option for all types) Connecting Inspection heating hod window with wiper (Option (Option for for O and all OD) types) OS and OA Connecting heating hod (Option for all types) pump Product advantages Rugged construction with 25-year stability verification. Disposal and maintenance cost minimisation thanks to staggered nominal sizes (e.g. and 8.5). Easy retrofitting to convert simple separator models into models boas ting easier operation and disposal. Extension stages 2 and 3 with multifunctional filling unit for high pressure internal cleaning and container filling. fire hose quick coupling B R 2 ½, DN OA OS, OA, OSE, OAE pump pump pump stop valve high pump disposal pressure stop valve high disposal pump pressure pump pump pump OSE and OAE disposal pump stop valve high disposal pressure pump pump stop valve high fire hose Disposal quick coupling connection B with disposal pressure R 2 ½, DN fire hose quick coupling B pump high pump stop valve R 2 ½, DN disposal pressure pump high stop valve pump disposal pressure disposal pump pump Disposal connection pumpwith fire hose quick coupling B R 2 ½, DN hig pre pum high press pump Diagram shows: Type 0 disposal pump stop valve high pressure pump disposal pump high pressure pump high stop valve disposal pressure pump pump fire hose quick coupling B R 2 ½, DN stop valve Contents Dimensions in mm Extension dimensions in mm in All OS OS/OA OSE litres All types except OA OA OSE OAE O OAE NS DN Sludge- Grease trap storage Total H 1 H 2 H 3 H 4 L 1 L 2 B 1 B 2 D H 5 L 3 B 3 L4 B5 H6 volume high stop valve disposal pressure pump pump fire hose quick coupling B R 2 ½, DN , ,

19 Product description Eco-Jet-O (Basic model): Disposal and cleaning via open lid (associated with odour emissions) Upgrading possible to extension stages 1 to 3 Eco-Jet-OD (extension stage 1): Odour-free disposal via connection to direct suction pipe* Subsequent cleaning via open lid! (associated with minor odour emissions) Upgrading possible to extension stages 2 and 3 Accessories: Sampling pipe, inspection window and filling unit...page 29 Lifting plant for free-standing installation...page 31 Eco-Jet-O Eco-Jet-OD NS basic model extension stage Hydrojet-OS (extension stage 2): Manual odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (manual operation via ball valve) Upgradable with disposal pump, and to extension stage 3 Hydrojet-OSE (extension stage 2): As above but with additional manually actuated disposal pump (necessary when the total lifting height exceeds 6 m) Upgrading possible to extension stage 3 Accessories: Sampling pipe...page 29 Lifting plant for free-standing installation...page 31 Hydrojet-OS Hydrojet-OSE extension stage 2 extension stage 2 with disposal pump NS Operational Operational Operational Operational side right side left side right side left Hydrojet-OA (extension stage 3): Program-controlled odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (automatic operation via solenoid valve) Upgradable with disposal pump Hydrojet-OAE (extension stage 3): As above but with additional automatically actuated disposal pump (necessary when the total lifting height exceeds 6 m) Accessories: Sampling pipe...page 29 Remote control...page 29 Lifting plant for free-standing installation...page 31 * Assumes regular disposal intervals pursuant to EN 1825 and DIN Hydrojet-OA Hydrojet-OAE extension stage 3 extension stage 3 with disposal pump NS Operational Operational Operational Operational side right side left side right side left

20 Eco-Jet and Hydrojet round grease separators made of polyethylene for free-standing installation The figure shows the Hydrojet-RA sampling pipe and lifting plant must be ordered separately. Dimensions Maintenance opening Areas of application The Eco-Jet-R/Hydrojet-R polyethylene grease separators are installed inside buildings in rooms protected from frost. The grease separators are available in various extension stages. The higher extension stages make it easier to clean the tank and dispose of the contents, and reduce the related odour emissions. Retrofitting on site with different extension stages is quick and easy. German Building Supervisory Authority Authorisation: Z Filling device with ball valve and pressure reduction valve (Option for R and RD) Inspection window with wiper (Option for R and RD) Extension dimensions fire hose quick coupling B R 2 ½, DN Product advantages 20 transport-friendly and easy installation because can be dismantled into separate components. Optimal and easy cleaning thanks to round shape. Easy retrofitting to convert simple separator models into models boas ting easier operation and disposal. Project-specific special solutions realisable with parallel modular extensions Project-specific special solutions realisable with parallel modular extensions Disposal conne fire hose quick R 2 ½, DN 143 Maintenance opening All types Filling device with ball valve and pressure reduction valve (Option for R and RD) Alle types except R fire hose quick coupling B R 2 ½, DN Filling device with ball valve and pressure reduction valve Filling device with ball valve and pressure reduction valve (Option for R and RD) Filling device with ball valve Inspection window (Option for R and RD) fire hose quick coupling B Filling device with ball valve fire hose quick coupling B Maintenance and pressure reduction valve Maintenance with wiper and pressure reduction valve Inspection window R 2 ½, DN (Option for R and Inspection RD) window R 2 ½, DN opening opening fire hose quick coupling B (Option for R and RD) Maintenance with wiper with wiper (Option fire hose quick coupling B Maintenance for R and RD) (Option Inspection for R and Inspection (Option window for R and RD) R 2 RD) window R 2 ½, DN opening ½, DN opening with wiper with wiper (Option for R and RD) Connecting (Option for R heating and RD) hod (Option for all types) RS, RA, RSE, RAE RSE and RAE fire hose quick coupling B fire hose fire quick hose coupling quick R B2 coupling ½, DN B14308 R 2 ½, DN R ½, DN fire hose quick coupling B fire hose cleaning quick coupling head B Disposal pump R 2 ½, DN Disposal pump R 2 ½, DN Disposal pump Disposal pump Disposal p 20 Connecting heating hod (Option for all types) Connecting heating hod (Option for all types) Ventilation Connecting heating hod (Option Connecting for all types) heating hod Connecting heating hod (Option for all types) (Option for all types) Ventilation RA, RSE, RAE RS, RA, RSE, RAE Ventilation Ventilation Ventilation Ventilation Diagram shows: Type R * Segments max Z/pieces Contents Dimensions in mm Extension dimensions (mm) in All RS/RA RA RS/RA litres All types except RSE RSE RSE RSE R RAE RAE RAE RAE NS DN Sludge Grease trap storage Total H 1 H 2 H 3 H 4 L 1 L 2 L 3 B 2 Z/n* D H 5 L 5 B 3 L4 H6 volume / / / / / /

21 Product description Eco-Jet-R (Basic model): Disposal and cleaning via open lid (associated with odour emissions) Upgrading possible to extension stages 1 to 3 Eco-Jet-RD (extension stage 1): Odour-free disposal via connection to direct suction pipe* Subsequent cleaning via open lid! (associated with minor odour emissions) Upgrading possible to extension stages 2 and 3 Accessories: Sampling pipe, inspection window and filling unit...page 29 Lifting plant for free-standing installation...page 31 Eco-Jet-R Eco-Jet-RD NS Basisausführung Ausbaustufe Hydrojet-RS (extension stage 2): Manual odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (manual operation via ball valve) Upgradable with disposal pump, and to extension stage 3 Hydrojet-RSE (extension stage 2): As above but with additional manually actuated disposal pump (necessary when the total lifting height exceeds 6 m) Upgrading possible to extension stage 3 Accessories: Sampling pipe...page 29 Lifting plant for free-standing installation...page 31 Hydrojet-RS Hydrojet-RSE extension stage 2 extension stage 2 with disposal pump NS Operational Operational Operational Operational side right side left side right side left Hydrojet-RA (extension stage 3): Program-controlled odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (automatic operation via solenoid valve) Upgradable with disposal pump Hydrojet-OAE (extension stage 3): As above but with additional automatically actuated disposal pump (necessary when the total lifting height exceeds 6 m) Accessories: Sampling pipe...page 29 Remote control...page 29 Lifting plant for free-standing installation...page 31 * Assumes regular disposal intervals pursuant to EN 1825 and DIN Hydrojet-RA Hydrojet-RAE extension stage 3 extension stage 3 with disposal pump NS Operational Operational Operational Operational side right side left side right side left

22 Lipurex and Lipurat oval grease separators made of stainless steel for free-standing installation The figure shows the Lipurat-OA sampling pipe must be ordered separately. Areas of application: The Lipurex-O/Lipurat-O grease separators made of stainless steel (material grade 316) are installed inside buildings in rooms protected from frost. The grease separators are available in various extension stages. The higher extension stages make it easier to clean the tank and dispose of the contents, and reduce the related odour emissions. Retrofitting on site with different extension stages is quick and easy. German Building Supervisory Authority Authorisation Z Product advantages Rugged construction with 25-year stability verification. Disposal and maintenance cost minimisation thanks to staggered nominal sizes (e.g. and 8.5). Easy retrofitting to convert simple separator models into models boas ting easier operation and disposal. Extension stages 2 and 3 with multi functional filling unit for high pressure internal cleaning and container filling. Dimensions Extension dimensions nlet 22 Alle types All types except 0 Disposal fire connection hose quick coupling with B Filling device with ball valve fire hose R 2 quick ½, DN coupling B Disposal Filling device with ball valve Disposal R 2 ½, connection connection DN with and pressure reduction valve with fire hose quick coupling B Filling device fire fire hose with hose ball quick valve quick coupling coupling B Maintenance B R 2 ½, DN and pressure (Option reduction for O valve and OD) Filling Filling device device with with ball ball valve valve and pressure R 2 R ½, reduction 2 ½, DN DN valve Maintenance opening Maintenance fire hose quick coupling B (Option for and O (Option for O and OD) and pressure pressure OD) reduction opening reduction valve valve Filling device with ball valve R 2 ½, DN Maintenance opening Maintenance (Option (Option for for O and O and OD) OD) and pressure reduction valve opening opening Ventilation Maintenance Ventilation (Option for O and OD) opening Ventilation Ventilation Ventilation Ventilation Inspection window with Inspection wiper (Option for O and OD) Inspection window Inspection with Inspection window with wiper window (Option with for O and OD) Connecting window with heating hod Inspection wiper (Option for O and OD) (Option for all types) wiper (Option for O and OD) wiper (Option for O and OD) window with Connecting heating heating hod hod Connecting heating hod Connecting heating hod wiper (Option for (Option (Option O and for for all for OD) all types) types) (Option for all types) all types) Connecting heating hod (Option for all types) cleaning head OS, OA, OSE, OAE OA OS and OA pump pump High High pressure pressure pump pump pump pump OSE and OAE stop valve Disposal pump stop valve stop valve stop valve stop valve Disposal pump Disposal pump Disposal pump Disposal pump stop valve Disposal pump Diagram shows: Type 0 Contents Dimensions in mm Extension dimensions in mm in All OS litres Alle types except OA OA O OS/OA OSE OSE OAE OAE NS DN Sludge Grease trap storage Total H 1 H 2 H 3 H 4 L 1 L 2 B 1 B 2 D H 5 L 3 B 3 L4 B5 H6 volume , ,

23 Product descriptions Lipurex-O (Basic model): Disposal and cleaning via open lid (associated with odour emissions) Upgrading possible to extension stages 1 to 3 Lipurex-OD (extension stage 1): Odour-free disposal via connection to direct suction pipe* Subsequent cleaning via open lid! (associated with minor odour emissions) Upgrading possible to extension stages 2 and 3 Accessories: Sampling pipe, inspection window and filling unit...page 29 Lifting plant for free-standing installation...page 31 Lipurex-O Lipurex-OD NS Basic model extension stage Lipurat-OS (extension stage 2): Manual odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (manual operation via ball valve) Upgradable with disposal pump, and to extension stage 3 Lipurat-OSE (extension stage 2): As above but with additional manually actuated disposal pump (necessary when the total lifting height exceeds 6 m) Upgrading possible to extension stage 3 Accessories: Sampling pipe...page 29 Lifting plant for free-standing installation...page 31 Lipurat-OS Lipurat-OSE extension stage 2 extension stage 2 with disposal pump NS Operational Operational Operational Operational side right side left side right side left Lipurat-OA (extension stage 3): Program-controlled odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (automatic operation via solenoid valve) Upgradable with disposal pump Lipurat-OAE (extension stage 3): As above but with additional automatically actuated disposal pump (necessary when the total lifting height exceeds 6 m) Accessories: Sampling pipe...page 29 Remote control...page 29 Lifting plant for free-standing installation...page 31 * Assumes regular disposal intervals pursuant to EN 1825 and DIN Lipurat-OA Lipurat-OAE extension stage 3 extension stage 3 with disposal pump NS Operational Operational Operational Operational side right side left side right side left

24 Lipurex and Lipurat round grease separators made of stainless steel for free-standing installation The figure shows the Lipurex-R sampling pipe and inspection window must be ordered separately. Areas of application The Lipurex-R/Lipurat-R stainless steel (material grade 316) grease separators are installed inside buildings in rooms protected from frost. The grease separators are available in various extension stages. The higher extension stages make it easier to clean the tank and dispose of the contents, and reduce the related odour emissions. Retrofitting on site with different extension stages is quick and easy. German Building Supervisory Authority Authorisation: Z Product advantages 20 transport-friendly and easy installation because can be dismantled into separate components. Optimal and easy cleaning thanks to round shape. Easy retrofitting to convert simple separator models into models boasting easier operation and disposal. Project-specific special solutions realisable with parallel modular extensions. Dimensions Extension dimensions All types All types except R Filling device with ball valve and pressure reduction valve (Option for R and RD) fire hose quick coupling B Filling device with ball valve Inspection window Filling device with ball valve R 2 ½, DN and pressure reduction valve with wiper and pressure reduction valve Maintenance (Option for R and RD) (Option for R and RD) Filling device with ball valve Inspection (Option fire hose quick coupling B window for R and RD) opening Inspection window R 2 ½, DN and pressure reduction valve with wiper with wiper Disposal pump (Option for R and RD) Maintenance (Option for R and RD) fire hose quick coupling B Inspection window Maintenance (Option for R and RD) R 2 ½, DN with opening wiper opening Maintenance (Option for R and RD) opening RS, RA, RSE RAE Disposal pump high pressure pump Disposal pump fire hose quick coupling B R 2 ½, DN RSE and RAE Disposal pump High pressu cleaning hea 24 Filling device with ball valve Connecting heating hod and pressure reduction valve (Option for all types) (Option for R and RD) Inspection window with wiper Maintenance (Option for R and RD) opening Connecting heating hod (Option for all types) Connecting heating hod (Option for all types) Connecting heating hod Disposal connection (Option with for all types) fire hose quick coupling B Disposal pump R 2 ½, DN RA, RSE, RAE RS/RA, RSE, RAE Ventilation Ventilation Ventilation Ventilation disposal pump disposal pump disposal pump disposal pump Diagram shows: Type R Connecting heating hod (Option for all types) * Segments max Z/pieces Contents Dimensions in mm Extension dimensions in mm Ventilation in All RS/RA RA RS/RA disposal pump RSE litres All types except RSE RSE RSE RAE R RAE RAE RAE NS DN Sludge- Grease trap storage Total H 1 H 2 H 3 H 4 L 1 L 2 B 2 Z/n* D H 5 L 5 B 3 L4 H6 volume / / / / / /

25 Product descriptions Lipurex-R (Basic model): Disposal and cleaning via open lid (associated with odour emissions) Upgrading possible to extension stages 1 to 3 Lipurex-RD (extension stage 1): Odour-free disposal via connection to direct suction pipe* Subsequent cleaning via open lid! (associated with minor odour emissions) Upgrading possible to extension stages 2 and 3 Accessories: Sampling pipe, inspection window and filling unit...page 29 Lifting plant for free-standing installation...page 31 Lipurex-R Lipurex-RD NS Basic model extension stage Lipurat-RS (extension stage 2): Manual odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (manual operation via ball valve) Upgradable with disposal pump, and to extension stage 3 Lipurat-RSE (extension stage 2): As above but with additional manually actuated disposal pump (necessary when the total lifting height exceeds 6 m) Upgrading possible to extension stage 3 Accessories: Sampling pipe...page 29 Lifting plant for free-standing installation...page 31 Lipurat-RS Lipurat-RSE extension stage 2 extension stage 2 with disposal pump NS Operational Operational Operational Operational side right side left side right side left Lipurat-RA (extension stage 3): Program-controlled odour-free disposal/cleaning via direct suction extraction and hydromechanical internal high pressure cleaning system (175 bar)* Only cold water supply required With inspection window and filling unit (automatic operation via solenoid valve) Upgradable with disposal pump Lipurat-RAE (extension stage 3): As above but with additional automatically actuated disposal pump (necessary when the total lifting height exceeds 6 m) Accessories: Sampling pipe...page 29 Remote control...page 29 Lifting plant for free-standing installation...page 31 * Assumes regular disposal intervals pursuant to EN 1825 and DIN Lipurat-RA Lipurat-RAE extension stage 3 extension stage 3 with disposal pump NS Operational Operational Operational Operational side right side left side right side left

26 Lipator fresh grease separator for free-standing installation with manual disposal system Areas of application The Lipator fresh grease separator made of stainless steel (material grade 304) is installed inside buildings in rooms protected from frost. The fresh grease separator has two disposal drums (or collecting containers) for grease and sludge. The separated materials are transferred from the separator into the drums by manually opening the drainage valves. When the drums are full, they are simply replaced by empty drums. The installation of a fresh grease separator (separator with partial disposal) is recommended whenever it is difficult to empty a grease separator directly when using a disposal vehicle, or in situations where it is not possible to interrupt normal business operations. German Building Supervisory Authority Authorisation Z (-15) Z (0) 26 Product advantages 90% of the total volume remains in place, which considerably reduces disposal costs and fresh water consumption. No accumulation of grease deposits because the separated substances only remain in the separator for a short time. Disposal possible without interrupting normal operations: e.g. work in kitchens can go on unhindered during disposal. No disposal vehicle required grease and sludge collected in replaceable drums. DN... DN... Container dimensions Dimensions in mm Article NS DN Largest single component No. H H 1 H 2 L B Diameter height

27 Lipatomat fresh grease separator for free-standing installation with automatic disposal system Areas of application The Lipatomat fresh grease separator made of stainless steel (material grade 304) is installed inside buildings in rooms protected from frost. The fresh grease separator has two disposal drums (or collecting containers) for grease and sludge. The separated materials are transferred from the separator into the drums automatically. When the drums are full, they are simply replaced by empty drums. The installation of a fresh grease separator (separator with partial disposal) is recommended whenever it is difficult to empty a grease separator directly when using a disposal vehicle, or in situations where it is not possible to interrupt normal business operations. German Building Supervisory Authority Authorisation Z (-15) Z (0) DN... DN... Product advantages Daily automatic disposal process 90% of the total volume remains in place which considerably reduces disposal costs and fresh water consumption. No accumulation of grease deposits because the separated substances only remain in the separator for a short time. Disposal possible without interrupting normal operations: e.g. work in kitchens can go on unhindered during disposal. No disposal vehicle required grease and sludge collected in replaceable drums. 27 Container dimensions Dimensions in mm Article NS DN Largest single component No. H H 1 H 2 L B Diameter height

28 Accessories/extension components for Lipumax P grease separators for ground installation Product description Model Article No. Sampling shaft, polyethylene DN 100, with 160 mm gradient (diameter = 450 mm) for ground installation downstream of a grease DN 100, with 30 mm gradient separator. With BEGU lid (LW 450) Cl. D 400 DN 150, with 160 mm gradient odour-tight DN 150, with 75 mm gradient Polyethylene extension piece to install aforementioned sampling shaft at a deeper position. Extension height 100 to 650 mm. Can be shortened at 45 mm intervals by cutting at the cutting marks. Concrete supporting ring Pursuant to DIN 4034, Part 1 to increase the installation depth between the manhole cover and the supporting slab in ECO-FPI grease separators. 28 Caution! Only extensions with a maximum height of 200 mm are permitted above supporting rings in accordance with DIN regulations. Shaft rings have to be used for greater depths of burial (see next section). Height 60 mm ARV 625 x Height 80 mm ARV 625 x Height 100 mm ARV 625 x Grease level sensor measuring device for grease layer thickness for grease separators for below ground installation. Suitable for liquid and hardening fats. Device with two dry contacts for report of filling status 50% and 80% to Building Monitoring System. With heated sensor head free-standing installation for save operation electrical connection: 230 V AC/50 Hz/12 W ground installation cable length: 10 m cable length: 20 m cable length: 30 m

29 Accessories/extension components for free-standing grease separators Product description Model Article No. Sampling pipe DN 100 (for grease separators NS 1 to 4) for installation in horizontal piping, DN 150 (for grease separators to 10) polyethylene, connections pursuant DN 200 (for grease separators NS 15 and 20) to DIN Sampling pipe DN 100 (for grease separators NS 1 to 4) for installation in horizontal piping, DN 150 (for grease separators to 10) polyethylene, connections pursuant DN 200 (for grease separators NS 15 and 20) to DIN Sampling pipe DN 100 (for grease separators NS 1 to 4) for installation in horizontal piping, DN 150 (for grease separators to 10) stainless steel material , with CE DN 200 (for grease separators NS 15 and 20) connectors and quick fasteners, connections pursuant to DIN SML piping Sampling pipe DN 100 (for grease separators NS 1 to 4) for installation in vertical piping, DN 150 (for grease separators to 10) stainless steel material , with CE DN 200 (for grease separators NS 15 and 20) connectors and quick fasteners, connections pursuant to DIN SML piping Inspection window DN 200 For polyethylene separators With window wiper, for checking the thickness of the grease layer For stainless steel separators Filling unit For polyethylene separators With open outlet pursuant to DIN 1988, Part 4, for connection to the drinking water For stainless steel separators pipes, with ball valve connection G 3/4 Diagram shows filling unit for stainless steel separators Remote control for indoor assembly Grease separator type OA/RA cable Grease separator type OAE/RAE (Supplied by customer) 7 x 10 mm 2 Protection type IP 54

30 Pumping stations for ground installation downstream of grease separators Product description Model Article No. Muli-Max-F duo for wastewater free of faeces Pumping station for installation downstream of buried grease separators, made of PE-HD with shaft diameter 1043 mm for maximum installation depth of 3 metres. Non-buoyant: cannot be pushed upwards by groundwater even if the water table rises to ground level, with structural homologation for up to 3 m total installation depth. Pressure pipe connection DN 50 or R 2 made of stainless steel or pressure pipe outlet with DA = 63 mm (bolt clamps supplied). pipe DN 150, vent pipe DN 100, blank cable duct DN 100. With open impoundment pressure bell, control, and 10 m pneumatic control pipe. Pump protection type IP 68, 400 V, 50 Hz. With stainless steel pipe and guide element for above-water coupling with stainless steel chain, with 10 m cable. Shaft with manhole cover: Manhole cover class B 125, screw-on, odour-tight Manhole cover class D400, screw-on, odour-tight Pump types: SAT - V 75/2/50/D Free flow impeller 2x Wastewater free of faeces SAT - V 150/2/50/D Free flow impeller 2x Wastewater free of faeces box: With operations display and readout Accessories: Top section short* (total height mm) Guide belt for top section* 2 x Top section long* (total height mm) Guide belt for top section* 2 x Flusher connection Vacuum release (only possible when combined with flusher connection) Air bubbler to increase operating reliability Signalling unit * Only applicable to pumping stations for manhole cover class B 125. The Article No.s with manhole cover class D 400 include as standard the top section for total installation depth mm and guide belt. Other models and pump types, also for wastewater containing faeces, available upon request.

31 Lifting plant* for installation downstream of free-standing grease separators Product description Model Article No. Muli-Mini duo with air bubbler (to increase operating reliability) V 75 - duo Lifting pump for installation downstream of free-standing grease separators. Polyethylene collecting tank, approx. 75 litres V duo working volume. Two wastewater submersible pumps IP 68, operating voltage 400 volt. Pneumatic water level switch including air bubbler for more reliable operation. Pressure connection for pressure pipe Ø mm. sockets DN 100 and venting socket DN 70 for connection to plastic pipe. Container diameter: 640 mm, Container height: 695 mm Empty weight: approx. 70 kg Muli-Star DDP 1 Lift plant for installation downsteam DDP of free-standing grease separators. Polyethylene collecting tank, approx litres DDP working volume. Two wastewater submersible pumps IP 68, operating voltage 400 volt. DDP Pneumatic water level switch. Pressure connection for pressure pipe Ø mm. sockets DN 100/150/200 and venting socket DN 70/100 for connections to plastic pipe. Containg dimensions (Length x Width x Height): 920 mm x 770 mm x 690 mm, Empty weight: approx. 75 kg Air bubbler Note: for increased operation reliability we recommend to equip the lift plant with an air bubbler when installed after a grease separator. Muli-Pro PE K duo duo with air bubbler (to increase operating reliability) Lifting pump for installation downstream K of free-standing grease separators. K Polyethylene collecting tank, approx. 300 litres working volume. Two wastewater submersible pumps K IP 68, operating voltage 400 volt. Pneumatic water level switch including air bubbler for more reliable K operation. Pressure connection for pressure pipe Ø 108 mm. Five inlet sockets DN 150 and venting K socket DN 100 for connection to plastic pipe. Inspection opening Ø 320 mm with odour-tight seal. Container dimensions (LxWxH): 1500 mm x 780 mm x 1035 mm Empty weight: approx. 400 kg * Other models and accessories available upon request Scale drawings of our lifting plants can be downloaded in DXF format from our website Use the selection assistant for this purpose by simply entering the relevant Article No. of the desired product in the search mask.

32 Special solutions: upstream tank system with eccentric spiral pumps 32 Application example: when inlet pipe connections to grease separator systems are positioned too low Low inlet pipe heights always cause problems when there is no gradient between the inlet piping and the grease separator. If it is not possible to undertake construction measures to lower the height of the grease separator, the only alternative is to pump the wastewater up to the grease separator. This is not possible using conventional lifting plant because of the grease in the wastewater. Normal lifting plant would also cause turbulence in the grease separator and disrupt the separation process. The solution is to install a displacement pump (e.g. eccentric spiral pump). The ACO eccentric spiral pumps are connected to an upstream tank (made either of polyethylene or stainless steel, or a concrete shaft built on site). The inflowing wastewater collects in this tank. If the inlet pipe lies in the concrete floor slab (as in the diagram above), a shaft has to be built on site to house the tank. A pneumatic pressure switch installed in the buffer tank is activated when the wastewater reaches a pre-set level and switches on the eccentric spiral pump. Spiral pumps cannot become blocked up with grease. The wastewater is then pushed into the grease separator without turbulence. All eccentric spiral pump installations are customised for each project. Please contact our sales consultants in our office or our field sales staff.

33 Special solutions: secondary treatment of greasy wastewater Application example: optimising the efficiency of grease separators Grease separators usually only separate out freely separatable oils/grease and solids. Emulsified and dissolved constituents in the wastewater largely pass right through the separator. This almost automatically means exceeding the limits when stringent regulations are laid down for lipophilic substances. Because many local authorities are taking an increasingly strict view of lipophilic substances, it is often necessary to install additional treatment steps downstream of grease separators. The ideal solution is the ACO Biojet biological wastewater treatment system. This is a particularly environmentallyfriendly solution specially designed by ACO Building Services for this purpose. This proven technology permanently and reliably keeps levels of low volatile lipophilic substances below statutory limits. It also effectively reduces COD and BOD5 levels, ph, and the volumes of settling solids. Our ACO Biojet brochure explains and describes in detail the functions, areas of application and product solutions for this technology. Please contact our technical experts, either in our office or our field sales staff, if you have any questions. 33

34 Reference projects around the world ACO Building Services grease separators have been used in a large number of major construction projects, and are installed in a very wide range of situations. The systems used include complete disposal grease separators, partial disposal grease separators, special solutions with customised lifting plant, and separator systems for special applications. In all cases, our drainage concepts, tailored to solve each particular problem, ensure full client satisfaction wherever they are used around the world. The following lists just some of our long list of reference projects: Frankfurt Airport (Photo source: Fraport AG) Hofbräuhaus Munich South Railway Station Shanghai AIDA Diva cruise liner 34

35 Building Location Type of ACO Building Services grease separator installed Hofbräuhaus Munich Hydrojet 0 (Twin unit, 2x 0) Technical University Refectory Dresden Lipurat NS 30 (2 x NS 15), VA-Tecflow twin lifting plant 30 l/s Space Park Bremen 2x 0, 2x NS 15, 3x NS 10, 2x, 4x (Hydrojet OA and RA) St. Bernhard Hospital Hildesheim 2 x Lipator NS 10 and VA-Tecflow twin lifting plant 15 l/s Airport Frankfurt 1x Hydrojet OAE NS 7 with downstream water treatment and lifting plant Main Railway Station Leipzig 6 x Lipurat NS 7 with matching lifting plant BMW World Munich 2x Lipurat NS 10, 1x Lipurat NS 15 Hotel Le Meridien Royal 5*+ Hamburg 2x Hydrojet OAE NS 7 Airport Geneva 2x Lipurat S 5 Dubai Mall Dubai 10x Lipatomat NS 10 South Railway Station Shanghai 7x Lipator NS 10 Neumayer III Research Station Antarctic Lipator, VA-Flowtec twin lifting plant AIDA Diva Cruise liner Lipatomat NS 15 35

36 ACO Service chain Every project is different, has its own requirements and challenges. In addition to our products, we offer our expertise and services to develop tailor-made solutions together from planning through to support after completion. 36 train: Information and training In the ACO Academy, we share the expertise of the international ACO Group with architects, planners, technicians and retailers who place value on quality. We invite you to benefit from our knowledge. design: Planning and optimisation The tendering and planning of draining solutions can involve a wide number of options. But which idea leads to the most economical and technically safest and most reliable solution? We help you find the right answer. support: Building consultancy and support To ensure there are no nasty surprises between the planning and construction of a drainage solution, we provide consulting services and support for your project on the construction site. care: Inspection and maintenance ACO products are designed and made to have a long life. With our aftersales offers we ensure that ACO meets your high quality standards even years later.

37 Planning and dimensioning separators profit from ACO expertise Dimensioning grease separators via the internet Calculate nominal sizes of grease separators you require for your application on Dimensioning is carried out pursuant to DIN EN regulations. Three dimensioning variants are possible: kitchen appliances food portions slaughter units After selecting the calculation method, input the requested data into the masks for further processing in compliance with the latest DIN EN 1825 regulations. The calculation sheet can then be printed out and filled in with project data, or there is a direct link to the selection assistant for product selection. Dimensioning grease separators Online catalogue Easy download of scale drawings and article descriptions with the Online catalogue on our website. Product selection made easy with the relevant selection criteria. selection assistant easy keyword and article searches article descriptions (TXT, Datanorm and GAEB) scale drawings (DXF) product visuals Installation and assembly instructions 37

38 Notes 38

39 Notes 39

40 ACO. The future of drainage. Geb 030/01/2013 international Subject to alterations