ROUGH TERRAIN HYDRAULIC CRANE
Dimensions TAILSWING 14' (4280) 24' (7315) 10' 4" (31) TRACK 8' 4-1/2" (2553) 17' 4" (5283) 26' 6-1/2" (8090) 24' 11" (7595) 43' (13 106) 1' 3" (381) 7' 3" (2210) 13' 1/2" (3975) 21 1' 2-3/8" (365) 2' 1" (6) 1' 8" (8) 12' 8" (3861) 13' 4" (64) 12' 3" (3734) 1' 8" (8) 14' 11" (46) 28' 3" (8611) C L Note: ( ) Reference dimensions mm Turng............ 22 6 (6858 mm) Front Axle Load........... 51,915 lbs. (23,548 kg) Rear Axle Load............ 51,556 lbs. (23,386 kg) Gross Vehicle Weight....... 103,471 lbs. (46,934 kg)
Workg Range FEET 2 220 210 56 200 190 180 31 170 1 HEIGHT FROM GROUND IN FEET 1 1 1 120 110 100 90 80 70 70 138 125 112 99 87 74 61 55 BOOM & EXTENSION HEIGHT IN FEET 20 10 78 MAX BOOM ANGLE 20 10 0 0 170 180 1 1 1 110 90 70 1 120 100 80 OPERATING RADIUS IN FEET FROM AXIS OF ROTATION 20 10 FEET AXIS OF ROTATION 5'-6" 9'-7" 7'-0" DIMENSIONS ARE FOR LARGEST GROVE FURNISHED HOOK BLOCK AND HEADACHEBALL, WITH ANTI-TWO BLOCK ACTIVATED. 3
Superstructure specifications Boom ft. - 138 ft. (10.6 m - 42 m) five-section full power boom. Maximum Tip Height: 148 ft. (.1 m). Foldg Lattice Extension 31 ft. - 56 ft. (9.4 m - 17 m) bi-fold lattice swgaway extension offsettable at or.stows alongside base section. Maximum Tip Height: 204 ft. (62.1 m). *Optional Lattice Extension 31 ft. (9.4 m) lattice swgaway extension. Offsettable at or. Stows alongside base boom section. Maximum Tip Height: 179 ft. (54.5 m). Boom Nose Five Nylatron sheaves mounted on heavy duty tapered roller beargs with removable p-type rope guards. Quick reevg type boom nose. A removable auxiliary boom nose with removable p type rope guard. Boom Elevation One double actg hydraulic cylder with tegral holdg valve provides elevation from -3 to 78. Load Moment & Anti-Two Block System Standard load moment and anti-two block system with audio-visual warng and control lever lockout. These systems provide electronic display of boom angle, length, radius, tip height, relative load moment, maximum permissible load and load dication and warng of impendg two-block condition. Counterweight Removable: 8,0 lbs. (3855 kg). 2,155 lbs. (977 kg) slab I.P.O. auxiliary hoist. Hydraulic System Seven ma pumps with a combed capacity 199.2 GPM (754 LPM). Maximum operatg pressure 00 psi (241 bar). Three dividual valve banks. Return le type filter with full flow by-pass protection and service dicator. Replaceable cartridge with micron filtration ratg of 5/12/16. 200 gallons (757 L) reservoir. Remote mounted oil cooler with thermostatically controlled hydraulic motor driven fan/air to oil. System pressure test panel with quick release type fittgs for each circuit. Hoist Specifications Ma and Auxiliary Hoist Planetary reduction with automatic sprg applied multi-disc brake. Electronic hoist drum rotation dicator, hoist drum cable followers and wire rope. Maximum Sgle Le Pull: 16,969 lbs. (7697 kg) Maximum Sgle Le Speed: 385 FPM (117 m/m) Maximum Permissible Le Pull: Rope Diameter: 12,920 lbs. (58 kg) 3/4. (19 mm) Cab Full vision, all galvanealed steel fabricated with acoustical lg and tted safety glass throughout. Deluxe seat with armrest mounted hydraulic sgle axis controllers. Dash panel corporates gauges for enge functions. Other standard features clude: skylight screen, hydraulic oil cab heater/defroster, telescopg tilt wheel, slidg side and rear wdows, openg skylight, electric wdshield wash-wipe, electric skylight wipers, fire extguisher, seat belt, ashtray and level dicator. Swg Planetary swg with foot applied multi-disc wet brake. Sprg applied, hydraulically released swg brake, 3 positive swg lock (N.Y.C. style) and 1 position, mechanical house lock, operated from cab. Maximum speed: 2.0 RPM. Rope Length: Maximum Rope Stowage: 620 ft. (190 m) 1,163 ft. (4.5 m) 4
Carrier specifications Chassis Box section frame fabricated from high-strength, low alloy steel. Integral outrigger housgs and front/rear towg and tie down lugs. Outrigger System Four hydraulic telescopg sgle-stage double box beam outriggers with verted jacks and tegral holdg valves. Three position settg. All steel fabricated quick release type outrigger floats,.5" (77.5 mm) diameter. Maximum outrigger pad load: 94,000 lbs. (42 638 kg). Outrigger Controls Controls and crane level dicator located cab. Enge Cumms 6CTA 8.3 diesel, six cylders, turbocharged, 2 bhp (186 kw) (Gross) @ 2,200 RPM. Maximum torque: 794 ft. lbs. (1077 Nm) @ 1,0 RPM. *Optional Enge Caterpillar 3126TA diesel, six cylders, turbocharged, 2 bhp (186 kw) (Gross) @ 2,0 RPM. Maximum torque: 686 ft. lbs. (9 Nm) @ 1,6 RPM. Fuel Tank Capacity 80 gallons (3 L) Transmission Full powershift with 6 forward and 6 reverse speeds. Rear axle disconnect for 4 x 2 travel. Electrical System Two 12 V - matenance free batteries. 24 V startg and lightg. Drive 4 x 4. Steerg Fully dependent power steerg: Front: Full hydraulic steerg wheel controlled. Rear: Full hydraulic hand lever controlled. Provides fite variations of 4 ma steerg modes: front only, rear only, crab and coordated. Rear steer dicatg gauge. Oscillation Lockouts Automatic full hydraulic lockouts on rear axle permits oscillation only with boom centered over the front. Brakes Full air split circuit operatg on all wheels. Sprg-applied, air released front and rear axles. Tires Std. 33.25 x 29-32PR earthmover type. *Optional: 33.25R29 radial. Lights Full lightg cludg turn dicators, head, tail, brake, and hazard warng lights. Maximum Speed 25 MPH ( kph). Gradeability (Theoretical) 87% based on 102,8 lbs. (46 648 kg) GVW. 33.25 x 29 tires, pumps disengaged, 138 ft. (42 m) boom, plus 31 ft. (9.4 m) swgaway. Miscellaneous Standard Equipment Full width steel fenders, dual rear view mirrors, hookblock tiedown, electronic back-up alarm, light package, front stowage well, tachometer/hourmeter, cold start aid (less canister), rear wheel position dicator, hydraulic cab heater, hoist mirrors, enge distress A/V warng system, tire flation kit. *Optional Equipment * Popular Option Package - cab controlled craoss axle differential locks front and rear. * Auxiliary Lightg Package - cab mounted remote controlled worklights, cab mounted amber flashg light, hoist mounted worklight, and dual base boom mounted floodlights. * Convenience Package - cludes immersion type enge block heater (120 V, 10 watt), -cab LMI light bar, and auto-grease system for turntable. *Denotes optional equipment Axles Front: Drive steer with differential and planetary reduction hubs rigid mounted to frame. Rear: Drive/steer with differential and planetary reduction hubs pivot mounted to frame. Automatic full hydraulic lockouts on rear axle. 5
RATED LIFTING CAPACITIES IN POUNDS WITH COUNTERWEIGHT FT. - 138 FT. BOOM ON OUTRIGGERS FULLY EXTENDED - 3 10 12 15 20 25 70 80 90 100 110 120 #0001 55 61 74 87 99 112 125 138 +1,000 (65.5) 106,0 90,0 68,0 (44.5) 52,2 (29.5) 79,100 79,100 79,100 (70) 67,0 51,1 (58) 39,200 31,000 (43.5) 25,0 (34.5) 20,0 (21.5) 78,4 77,0 (75.5) 69,8 59,8 51,4 39,4 31,0 () 25,0 20,800 () 17,2 (24.5) *57,0 57,0 51,6 44,0 38,7 34,200 29,0 25,1 (53.5) 20,0 (48.5) 16,8 10,0 (28) *43,0 43,0 39,5 33,800 29,200 (68) 25,800 (64) 22,900 () 20,000 16,900 10,0 6,0 () *32,100 32,100 32,100,200 26,0 (68.5) 23,4 (65) 20,4 17,900 11,800 7,670 4,710 (32) 2,390 (15.5) *,0,0 27,0 24,0 21,0 (69) 19,2 (66) 16,900 13,000 (57) 8,8 () 5,910 3,690 (33.5) 1,910 (21) *20,1 20,1 (79) 19,100 18,100 17,2 (72) 16,4 (69) 15,7 (66.5) 13,100 10,0 7,090 (49.5) 4,880 3,170 () 1,810 (24.5) *19,000 Mimum boom angle (deg.) for dicated length (no load) 16 18 Maximum boom length (ft.) at 0 degree boom angle (no load) 112 #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. +12 parts le required to lift this capacity (usg aux. boom nose). Refer to reevg diagram. 18,0 17,6 17,000 16,0 (72) 15,700 (69.5) 13,0 (65) 11,0 () 8,290 (55) 6,0 (49.5) 4,3 2,970 (36) 1,8 (27) Liftg Capacities On Outriggers Fully Extended - 3 At Zero Degree Boom Angle Boom Angle 0 55 61 74 87 99 112 27,0 (28.2) 12,8 (47.4) NOTE: ( ) Reference radii feet. 10,0 (53.8) 6,290 (66.6) 3,380 (79.4) 1,970 (92.2) 1,170 (105) A6-829-016119A Boom Extension Sequence % Inner-Mid 0 75 100 100 100 100 100 Mid 0 25 75 100 100 100 100 100 Outer-Mid 0 0 0 0 0 25 75 100 Fly 0 0 0 0 0 25 75 100 - S/N 9 6
31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 125 FT. MAIN BOOM ON OUTRIGGERS FULLY EXTENDED - 3 WITH COUNTERWEIGHT 1. All capacities above the bold le are based on structural strength of boom extension and do not exceed 85% of tippg loads, accordance with SAE J-765. 2. 31 ft. and 56 ft. foldg boom extension lengths may be used for sgle le liftg service only. 3. For ma boom lengths less than 125 ft. with the boom extension erected, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is set up. For boom angles not shown, use ratg of the next lower boom angle. 4. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 5. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. - S/N 10 70 80 90 100 110 120 1 1 Mimum boom angle (deg.) for dicated length (no load) Maximum boom length (ft.) at 0 degree boom angle (no load) 31 FT. LENGTH 56 FT. LENGTH #0021 #0023 #0041 #0043 *11,0 11,0 11,0 11,0 11,000 10,0 (70) 9,220 (66) 8,4 6,900 (57.5) 5,090 (53) 3,6 (47.5) 2,4 (41.5) 1,4 (34.5) *8,000 6,810 6,490 6,0 (70.5) 6,0 (66) 6,3 5,8 4,180 6,9 (79.5) 6,780 6,620 6,290 5,9 (71) 5,6 5,2 4,980 (.5) 4,6 3,420 2,3 (47.5) 1,4 *3,700 3,520 3,0 3,290 (68.5) 3,190 (64) 3,110 (59.5) 3,0 (54) 33 39 49 87 74 A6-829-014898A #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. 7
31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 138 FT. MAIN BOOM ON OUTRIGGERS FULLY EXTENDED - 3 WITH COUNTERWEIGHT 70 80 90 100 110 120 1 1 1 31 FT. LENGTH 56 FT. LENGTH #0021 #0023 #0041 #0043 9,0 (79.5) 9,0 (78) 9,0 9,0 9,110 8,4 (68.5) 7,5 6,990 (.5) 5,480 3,980 2,7 (47) 1,7 (41.5) *7,800 6,7 6,4 6,0 (69.5) 6,280 (65.5) 6,220 (61) 4,710 3,320 *5,0 5,0 (79.5) 5,0 (78) 5,100 (75.5) 4,900 4,700 (69.5) 4,0 (66.5) 4,0 (63.5) 4,100 (59.5) 3,6 2,690 1,870 (47.5) 1,1 *3,0 3,0 3,0 3,0 (70.5) 3,200 (67) 3,100 3,000 2,5 (53.5) Mimum boom angle (deg.) for dicated 37 42 47 length (no load) Maximum boom length (ft.) at 0 degree boom 87 74 angle (no load) A6-829-014897 #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. 1. All capacities above the bold le are based on structural strength of boom extension and do not exceed 85% of tippg loads, accordance with SAE J-765. 2. 31 ft. and 56 ft. foldg boom extension lengths may be used for sgle le liftg service only. 3. For ma boom lengths between 125 ft. and fully extended with the boom extension erected, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is set up. For boom angles not shown, use ratg of the next lower boom angle. 4. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 5. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. - S/N 11 8
RATED LIFTING CAPACITIES IN POUNDS WITH COUNTERWEIGHT FT. - 138 FT. BOOM 10 12 15 20 25 70 80 90 ON OUTRIGGERS % EXTENDED (17' 4" SPREAD) - 3 #01 55 61 74 87 99 112 125 138 115,000 (65.5) 101,0 86,1 62,8 (44.5) 39,7 (29.5) See Note 16 79,100 79,100 79,100 (70) 56,100 37,9 (58) 26,000 18,5 (43.5) 13,5 (34.5) 9,890 (21.5) 78,4 77,0 (75.5) 69,8 55,000 38,0 26,800 19,2 () 14,100 10,0 () 7,5 (24.5) *57,0 57,0 51,6 44,0,9 26,4 18,800 13,5 (53.5) 9,800 (48.5) 6,9 2,870 (28) *43,0 43,0 39,5 33,800 25,1 (68) 18,700 (64) 13,5 () 9,810 6,980 2,970 *32,100 32,100 32,100 25,800 19,900 (68.5) 14,7 (65) 10,9 8,1 4,110 1,0 *,0,0 26,1 20,0 15,900 (69) 12,1 (66) 9,310 5,2 (57) 2,5 () *20,1 20,1 (79) 19,100 18,100 16,7 (72) 13,0 (69) 10,4 (66.5) 6,0 3,6 1,690 (49.5) *19,000 18,0 17,6 17,000 14,000 (72) 11,0 (69.5) 7,5 (65) 4,790 () 2,810 (55) 1,310 (49.5) 0.1A (lbs.) 1,270 1,3 1,310 1,3 1,0 1,2 1,1 1,070 1,010 Mimum boom angle (deg.) for dicated length (no load) Maximum boom length (ft.) at 0 boom angle (no load) #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. 24 43 47 61 Boom Angle 0 - S/N 13 Liftg Capacities On Outriggers % Extended - 3 At Zero Degree Boom Angle 55 61 27,0 (28.2) 8,0 (47.4) NOTE: ( ) Reference radii feet. 5,8 (53.8) A6-829-014849A Boom Extension Sequence % Inner-Mid 0 75 100 100 100 100 100 Mid 0 25 75 100 100 100 100 100 Outer-Mid 0 0 0 0 0 25 75 100 Fly 0 0 0 0 0 25 75 100 9
31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 125 FT. MAIN BOOM ON OUTRIGGERS % EXTENDED (17' 4" SPREAD) - 3 WITH COUNTERWEIGHT 70 80 90 100 110 120 31 FT. LENGTH 56 FT. LENGTH #21 #23 #41 #43 *11,0 11,0 11,0 11,0 11,000 8,070 (70) 5,580 (66) 3,710 2,100 (57.5) *8,000 6,810 6,490 6,0 (70.5) 5,080 (66) 3,1 1,610 6,9 (79.5) 6,780 6,620 6,290 5,9 (71) 4,390 2,9 1,790 (.5) *3,700 3,520 3,0 3,290 (68.5) 2,4 (64) 1,2 (59.5) 0.1A (lbs.) 990 900 910 810 Mimum boom angle (deg.) for dicated 53 55 57 58 length (no load) Maximum boom length (ft.) at 0 boom angle 61 (no load) A6-829-014902A #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. 1. All capacities above the bold le are based on structural strength of boom extension. Capacities correspond to SAE J1289 (Test Load = 1.25P + 0.1A). 0.1A represents one-tenth (0.10) of the total boom weight reduced to the boom pot. 2. 31 ft. and 56 ft. foldg boom extension lengths may be used for sgle le liftg service only. 3. For ma boom lengths less than 125 ft. with the boom extension erected, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is set up. For boom angles not shown, use ratg of the next lower boom angle. 4. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 5. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. - S/N 14 10
31 FT. - 56 FT. FOLDING BOOM EXTENSION USING 138 FT. MAIN BOOM ON OUTRIGGERS % EXTENDED (17' 4" SPREAD) - 3 WITH COUNTERWEIGHT 1. All capacities above the bold le are based on structural strength of boom extension. Capacities correspond to SAE J1289 (Test Load = 1.25P + 0.1A). 0.1A represents one-tenth (0.10) of the total boom weight reduced to the boom pot. 2. 31 ft. and 56 ft. foldg boom extension lengths may be used for sgle le liftg service only. 3. For ma boom lengths between 125 ft. and fully extended with the boom extension erected, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is set up. For boom angles not shown, use ratg of the next lower boom angle. 4. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 5. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. - S/N 15 70 80 90 100 110 120 31 FT. LENGTH 56 FT. LENGTH #21 #23 #41 #43 9,0 (79.5) 9,0 (78) 9,0 9,0 8,220 5,7 (68.5) 3,920 2,480 (.5) 1,220 *7,800 6,7 6,4 5,4 (69.5) 3,690 (65.5) 2,1 (61) *5,0 5,0 (79.5) 5,0 (78) 5,100 (75.5) 4,900 4,4 (69.5) 3,0 (66.5) 1,890 (63.5) *3,0 3,0 3,0 3,0 (70.5) 2,280 (67) 1,2 0.1A (lbs.) 9 880 900 810 Mimum boom angle (deg.) for dicated 53 57 59 61 length (no load) Maximum boom length (ft.) at 0 boom 61 angle (no load) A6-829-014901B #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. 11
10 12 15 20 25 RATED LIFTING CAPACITIES IN POUNDS WITH COUNTERWEIGHT FT. - 138 FT. BOOM ON OUTRIGGERS 0% EXTENDED (10' 4" SPREAD) - 3 #8001 55 61 74 87 99 112 125 138 86,700 (65.5) 65,5 46,7 29,0 (44.5) 19,100 (29.5) See Note 16 71,7 55,0,0 (70) 25,6 17,4 (58) 11,4 7,0 (43.5) 4,420 (34.5) 2,2 (21.5) 69,000 53,700 (75.5) 39,200 25,0 17,0 12,1 7,9 () 4,9 2,690 () *57,0 49,100 36,1 23,0 16,0 11,1 7,5 4,4 (53.5) 2,1 (48.5) *43,0 33,5 21,9 14,9 10,0 (68) 6,980 (64) 4,4 () 2,1 *32,100 22,0 15,7 11,2 8,020 (68.5) 5,570 (65) 3,290 1,0 *22,5 16,200 11,8 8,7 6,0 (69) 4,410 (66) 2,590 *20,1 16,4 (79) 12,2 9,2 6,910 (72) 5,080 (69) 3,0 (66.5) *16,5 12,0 9,580 7,320 5,5 (72) 4,080 (69.5) 1,880 (65) 0.1A (lbs.) 1,270 1,3 1,310 1,3 1,0 1,2 1,1 1,070 1,010 Mimum boom angle (deg.) for dicated length (no load) 25 44 53 56 59 62 62 Maximum boom length (ft.) at 0 degree boom angle (no load) 55 #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. Liftg Capacities On Outriggers 0% Extended - 3 At Zero Degree Boom Angle Boom Angle 0 55 14,9 (28.2) 1,390 (47.4) NOTE: ( ) Reference radii feet. Boom Extension Sequence % A6-829-014851A Inner-Mid 0 75 100 100 100 100 100 Mid 0 25 75 100 100 100 100 100 Outer-Mid 0 0 0 0 0 25 75 100 Fly 0 0 0 0 0 25 75 100 - S/N 17 12
RATED LIFTING CAPACITIES ON RUBBER WITH COUNTERWEIGHT 33.25x29 GENERAL TIRES 10 12 15 20 25 STATIONARY CAPACITIES - 3 #9005 55 61 74 87,200 (65.5) 43,100 29,0 17,7 (44.5) 11,0 (29.5),8,8 29,0 (70) 17,7 11,0 (58) 7,0 4,520 (43.5) 29,0 17,7 11,0 7,0 4,520 () 29,0 17,7 11,0 7,0 4,520 17,7 11,0 7,0 (68) 4,520 (64) 2,290 (34.5) 2,290 2,290 (53.5) 2,290 () Mimum boom angle (deg.) for dicated length (no load) Maximum boom length (ft.) at 0 degree boom angle (no load) 31 58 #LMI operatg code. Refer to LMI manual for operatg structions. Boom Angle 0 Capacities at Zero Degree Boom Angle 9,0 (28.2) NOTE: ( ) Reference radii feet. A6-829-015116 1. Capacities do not exceed 75% of tippg loads as determed by test accordance with SAE J765. 2. Capacities are applicable to maches equipped with 33.25x29 (32 ply) General tires at 65 psi cold flation pressure. 3. Defed Arc - Over front cludes 6 on either side of longitudal centerle of mache. 4. Capacities appearg above the bold le are based on structural strength and tippg should not be relied upon as a capacity limitation. 5. Capacities are applicable only with mache on firm level surface. 6. On rubber liftg with boom extensions not permitted. 7. For pick and carry operation, boom must be centered over front of mache, mechanical swg lock engaged and load restraed from swgg. When handlg loads the structural range with capacities close to maximum ratgs, travel should be reduced to creep speeds. 8. Axle lockouts must be functiong when liftg on rubber. 9. All liftg depends on proper tire flation, capacity and condition. Capacities must be reduced for lower tire flation pressures. See liftg capacity chart for tire used. Damaged tires are hazardous to safe operation of crane. 10. Creep - not over 200 ft. of movement any mute period and not exceedg 1 mph. - S/N 18 13
RATED LIFTING CAPACITIES ON RUBBER (cont'd.) PICK & CARRY CAPACITIES - UP TO 2.5 MPH BOOM CENTERED OVER FRONT (SEE NOTE 7) #9006 55 61 74 87 10,200 (65.5) 29,1 12,200 29,1 15 37,2 29,1 (70) 26,900 18,1 20,0 (44.5) 29,1 26,900 18,1 12,0 25 20,2 (29.5) 20,2 (58) 20,2 18,1 12,0 14,0 14,0 14,4 12,0 (68) 10,6 (43.5) 10,6 () 10,6 10,6 (64) 7,9 (34.5) 7,9 7,9 (53.5) 7,9 () 5,920 (21.5) 5,920 () 5,920 (48.5) 5,920 4,380 (24.5) 4,380 4,380 2,1 (28) 2,1 Mimum boom angle (deg.) for dicated length (no load) Maximum boom length (ft.) at 0 degree boom angle (no load) 74 #LMI operatg code. Refer to LMI manual for operatg structions. Capacities at Zero Degree Boom Angle Boom Angle 55 61 74 0 16,0 (28.2) 5,1 (47.4) 3,4 (53.8) 1,110 (66.6) NOTE: ( ) Reference radii feet. A6-829-015118 - S/N 19 14
RATED LIFTING CAPACITIES ON RUBBER WITH COUNTERWEIGHT 33.25Rx29 GENERAL TIRES STATIONARY CAPACITIES DEFINED ARC OVER FRONT (SEE NOTE 3) #9005 55 61 74 87 10,200 (65.5),8 12,200,8,8 (75.5) 15,200,8 (70),8 34,0 20,8 (44.5),8,8 34,0 24,0 25 27,000 (29.5) 27,100 (58) 27,100 27,100 24,0 19,200 19,200 19,200 19,200 (68) 14,200 (43.5) 14,200 () 14,200 14,200 (64) 10,5 (34.5) 10,5 10,5 (53.5) 10,5 () 7,905 (21.5) 7,905 () 7,905 (48.5) 7,905 5,8 (24.5) 5,8 5,8 2,880 (28) 2,880 Mimum boom angle (deg.) for dicated length (no load) Maximum boom length (ft.) at 0 degree boom angle (no load) 74 #LMI operatg code. Refer to LMI manual for operatg structions. Capacities at Zero Degree Boom Angle Boom Angle 55 61 74 0 22,000 (28.2) 6,8 (47.4) 4,570 (53.8) 1,480 (66.6) NOTE: ( ) Reference radii feet. A6-829-015117 (See page 18 for notes.) - S/N 20 15
RATED LIFTING CAPACITIES IN POUNDS WITHOUT COUNTERWEIGHT FT. - 138 FT. BOOM 10 12 15 20 25 70 80 90 100 110 ON OUTRIGGERS FULLY EXTENDED - 3 #0801 55 61 74 87 99 112 125 138 122,000 (65.5) 104,0 85,800 63,0 (44.5) 46,000 (29.5) See Note 16 79,100 79,100 79,100 (70) 62,1 44,900 (58) 34,100 26,7 (43.5) 21,0 (34.5) 16,200 (21.5) 78,4 77,0 (75.5) 69,8 59,8,200 34,0 27,000 () 21,6 16,7 () 12,900 (24.5) *57,0 57,0 51,6 44,0 38,7 34,1 26,800 21,4 (53.5) 16,100 (48.5) 12,200 6,8 (28) *43,0 43,0 39,5 33,800 29,200 (68) 25,800 (64) 21,0 () 16,1 12,2 6,9 3,4 () *32,100 32,100 32,100,200 26,0 (68.5) 22,0 (65) 17,0 13,0 8,1 4,620 2,080 (32) *,0,0 27,0 24,0 21,0 (69) 18,700 (66) 14,7 9,3 (57) 5,810 () 3,310 1,0 (33.5) *20,1 20,1 (79) 19,100 18,100 17,2 (72) 16,4 (69) 15,7 (66.5) 10,5 7,020 4,490 (49.5) 2,610 1,1 () *19,000 18,0 17,6 17,000 16,0 (72) 15,700 (69.5) 11,800 (65) 8,2 () 5,690 (55) 3,790 (49.5) 2,3 1,170 (36) Mimum boom angle (deg.) for dicated length (no load) 22 27 31 33 34 Maximum boom length (ft.) at 0 boom angle (no load) 74 #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. Boom Angle 0 Liftg Capacities On Outriggers Fully Extended - 3 At Zero Degree Boom Angle 55 61 74 27,0 (28.2) 12,8 (47.4) 10,0 (53.8) 4,370 (66.6) NOTE: ( ) Reference radii feet. A6-829-014848A Boom Extension Sequence % Inner-Mid 0 75 100 100 100 100 100 Mid 0 25 75 100 100 100 100 100 Outer-Mid 0 0 0 0 0 25 75 100 Fly 0 0 0 0 0 25 75 100 - S/N 21 16
31 FT. - 56 FT. FOLDING BOOM EXTENSION WITHOUT COUNTERWEIGHT USING 125 FT. MAIN BOOM ON OUTRIGGERS FULLY EXTENDED - 3 70 80 90 100 110 120 1 31 FT. LENGTH 56 FT. LENGTH #0821 #0823 #0841 #0843 *11,0 11,0 11,0 11,0 11,000 10,0 (70) 9,220 (66) 6,670 4,6 (57.5) 3,080 (53) 1,8 (47.5) *8,000 6,810 6,490 6,0 (70.5) 6,0 (66) 5,710 3,8 2,380 6,9 (79.5) 6,780 6,620 6,290 5,9 (71) 5,6 5,2 4,270 (.5) 2,900 1,790 *3,700 3,520 3,0 3,290 (68.5) 3,190 (64) 3,110 (59.5) 1,920 (54) Mimum boom angle (deg.) for dicated 42 46 48 51 length (no load) Maximum boom length (ft.) at 0 degree 74 61 boom angle (no load) A6-829-014900 #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. 1. All capacities above the bold le are based on structural strength of boom extension and do not exceed 85% of tippg loads, accordance with SAE J-765. 2. 31 ft. and 56 ft. foldg boom extension lengths may be used for sgle le liftg service only. 3. For ma boom lengths less than 125 ft. with the boom extension erected, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is set up. For boom angles not shown, use ratg of the next lower boom angle. 4. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 5. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only. - S/N 22 17
- S/N 23 18 31 FT. - 56 FT. FOLDING BOOM EXTENSION WITHOUT COUNTERWEIGHT USING 138 FT. MAIN BOOM ON OUTRIGGERS FULLY EXTENDED - 3 70 80 90 100 110 120 1 1 31 FT. LENGTH 56 FT. LENGTH #0821 #0823 #0841 #0843 9,0 (79.5) 9,0 (78) 9,0 9,0 9,110 8,4 (68.5) 7,210 5,100 (.5) 3,470 2,170 1,120 (47) *7,800 6,7 6,4 6,0 (69.5) 6,280 (65.5) 4,420 (61) 2,910 1,680 *5,0 5,0 (79.5) 5,0 (78) 5,100 (75.5) 4,900 4,700 (69.5) 4,0 (66.5) 4,0 (63.5) 3,210 (59.5) 2,170 1,2 *3,0 3,0 3,0 3,0 (70.5) 3,200 (67) 3,090 2,0 1,1 (53.5) Mimum boom angle (deg.) for dicated 46 49 52 length (no load) Maximum boom length (ft.) at 0 boom 74 61 angle (no load) A6-829-014899A #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. 1. All capacities above the bold le are based on structural strength of boom extension and do not exceed 85% of tippg loads, accordance with SAE J-765. 2. 31 ft. and 56 ft. foldg boom extension lengths may be used for sgle le liftg service only. 3. For ma boom lengths between 125 ft. and fully extended with the boom extension erected, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is set up. For boom angles not shown, use ratg of the next lower boom angle. 4. WARNING: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 5. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 6. Capacities listed are with outriggers properly extended and vertical jacks set only.
RATED LIFTING CAPACITIES IN POUNDS WITHOUT COUNTERWEIGHT FT. - 138 FT. BOOM 10 12 15 20 25 70 ON OUTRIGGERS % EXTENDED (17' 4" SPREAD) - 3 #4801 55 61 74 87 99 112 125 138 112,0 (65.5) 99,0 84,0,1 (44.5),9 (29.5) See Note 16 79,100 79,100 73,0 (70) 44,0 29,1 (58) 19,2 13,100 (43.5) 8,9 (34.5) 5,9 (21.5) 78,4 77,0 (75.5) 69,8 43,5 29,6 20,0 13,800 () 9,520 6,420 () 4,070 (24.5) *57,0 57,0 51,6,0 27,6 19,700 13,0 8,990 (53.5) 5,8 (48.5) 3,4 *43,0 43,0 37,800 26,000 18,6 (68) 13,200 (64) 8,9 () 5,8 3,490 *32,100 32,100 26,5 19,0 14,4 (68.5) 10,1 (65) 7,0 4,6 1,310 *,0 26,7 19,9 15,2 11,0 (69) 8,200 (66) 5,820 2,4 (57) *20,1 20,1 (79) 19,100 15,700 12,0 (72) 9,380 (69) 6,980 (66.5) 3,590 1,310 *19,000 18,0 15,9 12,6 10,100 (72) 8,1 (69.5) 4,7 (65) 2,4 () 0.1A (lbs.) 1,270 1,3 1,310 1,3 1,0 1,2 1,1 1,070 1,010 Mimum boom angle (deg.) for dicated length (no 43 48 51 54 56 load) Maximum boom length (ft.) 61 at 0 degree boom angle (no load) #LMI operatg code. Refer to LMI manual for structions. *This capacity is based upon maximum boom angle. Boom Angle 0 Liftg Capacities On Outriggers % Extended - 3 At Zero Degree Boom Angle 55 61 23,900 (28.2) 4,780 (47.4) 2,6 (53.8) NOTE: ( ) Reference radii feet. A6-829-0148A Boom Extension Sequence % Inner-Mid 0 75 100 100 100 100 100 Mid 0 25 75 100 100 100 100 100 Outer-Mid 0 0 0 0 0 25 75 100 Fly 0 0 0 0 0 25 75 100 - S/N 24 19
WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES LIFTING OFF MAIN BOOM NOSE ( FT. - 138 FT. BOOM) WITH: 25 ft. Fly Section (Stowed on Boom Base Section)) 4 lbs. 31 ft. Fixed Extension (Stowed on Boom Base Section)) 1,110 lbs. 31 ft. Fixed Extension (Erected) 4,8 lbs. 31-56 ft. Foldg Extension (Stowed on Boom Base Section) 1,5 lbs. 31-56 ft. Foldg Extension (Erected) 10,700 lbs. LIFTING OFF 31 FT. BOOM EXTENSION WITH: 25 ft. Fly Section (Stowed on Boom Base Section) 4 lbs. 25 ft. Fly Section (Erected) Not Permitted 25 ft. Fly Section (Stowed on 31 ft. Extension) Not Permitted *Reduction of ma boom capacities AUXILIARY BOOM NOSE 127 lbs. HOOKBLOCKS and HEADACHE BALLS: 75 Ton, 6 Sheave w/cheekplates 2,299 lbs.+ 75 Ton, 6 Sheave w/o cheekplates 1,711 lbs.+ Ton, 3 Sheave w/cheekplates 1,095 lbs.+ Ton, 3 Sheave w/o cheekplates 8 lbs.+ 15 Ton, 1 Sheave 423 lbs.+ 10 Ton Headache Ball 5 lbs.+ +Refer to ratg plate for actual weight. When liftg over swgaway and/or jib combations, deduct total weight of all load handlg devices reeved over ma boom nose directly from swgaway or jib capacity. NOTE: All load handlg devices and boom attachments are considered part of the load and suitable allowances MUST BE MADE for their combed weights. Weights are for Grove furnished equipment. SIZE (FRONT & REAR) MICHELIN 33.25R29 XRB** TIRE INFLATION - PSI (BAR) TRA CODE LIFTING SERVICE, GENERAL TRAVEL AND EXTENDED TRAVEL STATIC, CREEP & 2.5 MPH (4.0 KPH) ---- 75 (5.2) 33.25x29 (32) E-3 65 (4.5) (SEE OPERATOR'S MANUAL FOR EXTENDED ROADING) - S/N 5 LINE PULLS AND REEVING INFORMATION HOISTS Ma & Aux. Model Ma & Aux. Model CABLE SPECS. 3/4" (19 mm) 18x19Class or x7 Rotation Resistant M. Breakg Str. 64,0 lbs. 3/4" (19 mm) 6x37 Class EIPS IWRC Special Flexible M. Breakg Str. 58,800 lbs. PERMISSIBLE LINE PULLS NOMINAL CABLE LENGTH 12,920 lbs. 620 ft. 12,920 lbs. 620 ft. - S/N 26 UPPER BOOM NOSE SHEAVES TO HOIST AUXILIARY BOOM NOSE SHEAVE REEVING DIAGRAM BOTTOM BOOM NOSE SHEAVE WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES LIFTING OFF MAIN BOOM NOSE ( FT. - 138 FT. BOOM) WITH: 25 ft. Fly Section (Stowed on Boom Base Section)) 4 lbs. HOOKBLOCK 31 ft. Fixed Extension (Stowed on Boom Base Section)) 1,110 lbs. SHEAVES 31 ft. Fixed Extension (Erected) 4,8 lbs. 31-56 ft. Foldg Extension (Stowed on Boom Base Section) 1,5 lbs. 31-56 ft. Foldg Extension (Erected) 10,700 lbs. When liftg over swgaway and/or jib DEAD END ON BOOM combations, NOSE deduct total weight of all load handlg devices reeved over ma boom nose directly from swgaway or jib capacity. NOTE: All load handlg devices and boom attachments are considered part LIFTING OFF 31 FT. BOOM EXTENSION WITH: 20 of the load and suitable allowances 25 ft. Fly Section (Stowed on Boom Base Section) 4 lbs. MUST BE MADE for their combed
CENTERLINE OF BOOM 3 OVER SIDE CENTERLINE OF OUTRIGGER SUPPORT LONGITUDINAL CENTERLINE OF CRANE CG OF LOAD OVER FRONT OVER REAR SEE NOTE AT BOTTOM DIAGRAM FOR LIFTING ON OUTRIGGERS BOOM CENTERED OVER FRONT OVER SIDE CENTERLINE OF ROTATION REAR AXLE OSCILLATION LOCKOUTS MUST BE SET TO MAINTAIN 3 CAPACITIES 12 6 FRONT DIAGRAM FOR LIFTING ON TIRES C6-829-0029 C6-829-001159 BOLD LINES DETERMINE THE LIMITING POSITION OF ANY LOAD FOR OPERATION WITHIN WORKING AREAS INDICATED
Grove Worldwide World Headquarters 1565 Buchanan Trail East P.O. Box 21 Shady Grove, Pennsylvania 17256, U.S.A. Tel: [Int + 1] (717) 597-8121 Fax: [Int + 1] (717) 597-62 Western Hemisphere, Asia/Pacific Grove Europe Limited* Sunderland SR4 6TT, England Tel: [Int + 44] 191 565-6281 Fax: [Int + 44] 191 564-0442 Europe, Africa, Middle East Deutsche Grove GmbH Sales and Service Helmholtzstrasse 12, Postfach 26 D-7 Langenfeld, Germany Tel: [Int + 49] (2173) 8909-0 Fax: [Int + 49] (2173) 8909- Wilhelmshaven Works Industriegelande West, Postfach 1853 D-268 Wilhelmshaven, Germany Tel: [Int + 49] (4421) 294-0 Fax: [Int + 49] (4421) 294-1 Grove Cha - Representative Office Beijg Hotel Room 74 No. 33 East Chang An Avenue Beijg, 100004, Cha Tel: [Int + 86] (10) 513-7766 Fax: [Int + 86] (10) 513-77 Grove Middle East P.O. Box 290 Dubai, United Arab Emirates Tel: (Int + 971) (4) 3780 Fax:(Int + 971) (4) 3736 Lifetime Customer Support Western Hemisphere, Asia/Pacific 1086 Wayne Avenue Chambersburg, Pennsylvania USA Tel: [Int + 1] (717) 263-5100 Fax: [Int + 1] (717) 267-04 Europe, Africa, Middle East Sunderland SR4 6TT, England Tel: [Int + 44] 191 565-6281 Parts Fax: [Int + 44] 191 510-9242 Service Fax: [Int + 44] 191 510-95 Grove Asia/Pacific - Regional Office 171 Ch Swee Road #10-09 San Centre Sgapore 0316 Tel: [Int + 65] 536-6112 Fax: [Int + 65] 536-6119 Asia/Pacific, Near East *Grove Europe Limited, Registered England, Number 18128, Registered office, Crown Works, Pallion, Sunderland, Tyne & Wear, England SR4 6TT Constant improvement and engeerg progress make it necessary that we reserve the right to make specification, equipment, and price changes without notice. Illustrations shown may clude optional equipment and accessories and may not clude all standard equipment. Distributed By: Form No.: Part No.: 3-13 899-6M Prted U.S.A.