Bulletin 00 Line Open Type Modular Kits and Components Selection Guide
Bulletin 00, 00F, 0 AC Contactors and Starters Product Overview AC Contactor and Starter Modular Kits and Components sizes 0 for open-type Bulletin 00 top-wired contractors, Bulletin 00F feed-through contactors, and Bulletin 0 fullvoltage starters, are provided as modular kits for faster delivery. Other sizes and enclosed-type devices are also available. Bulletin 00 00F 0 Features Top-wired contactor Feed-through wired contactor Non-reversing starter 0 0 0 Continuous Ampere Rating [A] -Phase Power Poles -Phase Power Poles -Phase Power Poles -Phase Power Poles 0 0 0 0V (/ Hp) 00 00V (-/ 00 Hp) 00 00V (-/ Hp) 00 00V ( 00 Hp) 0V ( Hp) 00 00V ( 00 Hp) Motor Voltage Standards Certifications /EEMAC ICS (Industrial Controls and Systems) UL 0 CSA C., No. ABS /. USCG CFR.0 IEEE UL Listed (File No. E; Guide No. NLDX) (File No. E0; Guide No. NPKR) CSA Certified (LR) CE Marked (Per EN 0) American Bureau of Shipping (ABS) /EEMAC ICS (Industrial Controls and Systems) UL 0 CSA C., No. ABS /. USCG CFR.0 IEEE UL Listed (File No. E; Guide No. NLDX) (File No. E0; Guide No. NPKR) CSA Certified (LR) CE Marked (Per EN 0) American Bureau of Shipping (ABS) 00 V (. 00 Hp) 0V (/ Hp) /EEMAC ICS (Industrial Controls and Systems) UL 0 CSA C., No. ABS /. USCG CFR.0 UL Listed (File No. E; Guide No. NLDX) CSA Certified (File LR ) CE Marked (per EN 0--) American Bureau of Shipping (ABS) Hazardous Location: UL Listed (File No. E0), CSA Certified (File No. LR ) Product Selection Page Page Page Publication 00-SG00A-EN-P
Bulletin 00 AC Contactors Cat. No. Explanation Bulletin 00 Open Type Top-Wired Contactor All power connections are at the top of the contactor for wiring convenience Contactor can be field wired for single- or three-phase applications sizes 0 Available as components or a modular kit for faster delivery Product selection can be done via two options: Ordering a complete kit Ordering individual components Top-wired contactor includes a 0V AC coil, () N.O. auxiliary contact, top-wiring kit, and load-side terminal shield, as standard sizes 00, Available as factory assembled Table of Contents Modular Kits... Components... Factory Assembled... Specifications... Full Load Currents of AC Motors... Approximate Dimensions... 0 Standards Compliance /EEMAC ICS UL 0 CSA C. No. ABS /. American Bureau of Shipping UCSG CFR.0 IEEE EN/IEC 0-- CE Marked Certifications CSA Certified (LR) UL Listed (File No. E, Guide No. NLDX) Catalog Number Explanation For flexibility, devices may be ordered in a convenient modular kit or as individual components. A modular kit includes: Base contactor Selectable coil voltage Top-wiring kit Selectable number of poles Load-side terminal shield Selectable options Modular Kit Example Cat. No. 00 B O D 0 a b c d e a A 0 B C D E b Enclosure Type Type O No enclosure Nominal Coil Voltage Voltage Frequency A B C D 0V 0V 0V 0V 0V 00V 0V 0V c 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz F V 0 Hz H 00 0V 0 Hz I V 0 Hz J V 0/0 Hz N 0V 0 Hz VL V DC VG 0V DC 0 0 0 d Number of Poles Voltage Three Power Poles and () N.O. Auxiliary Contact Four Power Poles and () N.O. Auxiliary Contact Five Power Poles and () N.O. Auxiliary Contact Options Surge Suppressor for 0 or 0V AC Coil 0 () N.O. Auxiliary Contact () N.C. Auxiliary Contact e Up to () combinations of auxiliary contacts can be selected. Example: indicates () N.O. and () N.C. contacts. 0 Publication 00-SG00A-EN-P
Bulletin 00 AC Contactors Product Selection - Modular Kit Προδυχτ Σελεχτιον Προδυχτ Σελεχτιον Product Selection of sizes 0 by Modular Kits 0 Base Contactor Includes a 0V AC coil and () N.O. auxiliary contactor as standard. Coil Voltage The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no. Example: Cat. No. 00-AO 0 becomes Cat. No. 00-AOD0. [V] 0 0 0 0 0 0 0 0 0 0 00 AC, 0 Hz J D A N I B C AC, 0 Hz J D H A F B C DC VL VG VG DC voltage code is only available on size 0. When ordering a DC voltage code, add "DC" to the catalog number. Example: 00DC-BOVL0. Options for Modular Kit Continuous Ampere Rating [A] Max. Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating -Phase Motor Voltage -Phase Motor Voltage 00V AC Maximum 0 Hz Note: The base contactor includes a 0V AC coil as standard. For all other voltages, a second coil will be included in the modular kit for field swap out. Options Surge Suppressor for 0 or 0V AC Coil 0 () N.O. Auxiliary Contact () N.C. Auxiliary Contact Up to () combinations of auxiliary contacts can be selected. Example: indicates () N.O. and () N.C. contacts. 0 Hz Power Poles Power Poles Power Poles V 0V 00V 0V 0 V 0 V Cat. No. Cat. No. Cat. No. 00 /.. 0 00-AO 0 00-AO 0 00-AO 0.. 0 0 00-BO 0 00-BO 0 00-BO 0. 0 00-CO 0 00-CO 0 00-CO 0 0. 0 0 0 00-DO 0 00-DO 0 00-DO 0 0 0 00 00-EO 0 00-EO 0 00-EO 0 0 00 0 00 0 0 00 00 00 0 00 00 00 0 0 00 00 00 See page for sizes 00,. Example: Cat. No. 00-COD0--0 includes a size, -pole, contactor with a 0V AC coil, surge suppressor, and () N.O. auxiliary contact. Publication 00-SG00A-EN-P
Bulletin 00 AC Contactors Product Selection - Components Product Selection of sizes 0 by Components Base Contactor Coil Auxiliary Contact Contactor Surge Suppressor Power Pole Top Wire Kit Load -Side Terminal Shield Base Contactor Continuous Ampere Rating [A] Cat. No. 0 00F-AOD0 00F-BOD0 00F-COD0 0 00F-DOD0 00F-EOD0 Coils 0 Cat. No. Cat. No. Cat. No. Cat. No. V 0/0 Hz CB0 CC0 CD0 CE0 0V 0 Hz, 0V 0 Hz CB CC CD CE 0V 0 Hz CB CC CD CE 0V 0 Hz, 0V 0 Hz CB CC CD CE V 0 Hz CB0 CC0 CD0 CE0 0V 0 Hz CB CC CD CE V 0 Hz CB CC CD CE 0V 0 Hz, 0V 0 Hz 0V 0 Hz, 00V 0 Hz CB CC CD CE CB CC CD CE V DC -BDC -CDC -DDC 0V -B0DC -C0DC -D0DC DC Note:The base contactor includes a 0V AC coil as standard. For all other voltages, select an alternate component coil for field installation. Surge Suppressor Cat. No. 0V AC -K0 0 0 V AC Varistor -KA0 Power Pole Adders Cat. No. N.O. 0 -P0A N.O. -PA N.O. -PA N.O. -PA Top Wiring Kit Cat. No. 0 -TW0 -TW -TW -TW Terminal Shield Kit Cat. No. 0 -TS0, -TS 0 Auxiliary Contact Contactors Cat. No. N.O. 0 -A N.O. 0 -AA N.C. 0 -B N.C. 0 -BB N.O. and N.C. 0 -AB Publication 00-SG00A-EN-P
Bulletin 00 AC Contactors Product Selection - Factory Assembled Product Selection of sizes 00,, as Factory Assembled Continuous Ampere Rating [A] Max. Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating -Phase Motor Voltage -Phase Motor Voltage 00V AC Maximum 0 Hz 0 Hz Power Poles Power Poles Power Poles V 0V 00V 0V 0 V 0 V Cat. No. Cat. No. Cat. No. 00 /.. 00-TOD0 0.. 0 0. 0 0. 0 0 0 0 0 00 0 00 0 00 00-FOD0 00-FOD0 0 0 00 00 00 00-GOD0 0 00 00 00 00-HOD0 0 00-JOD0 0 00 00 00 00-KOD0 See page for sizes 0. Coil Voltage The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no. Example: Cat. No. 00-AO 0 becomes Cat. No. 00-AOD0. [V] 0 0 0 0 0 0 0 0 0 0 00 AC, 0 Hz J D A N I B C AC, 0 Hz J D H A F B C DC VL VG VG 0 Publication 00-SG00A-EN-P
Bulletin 00F AC Feed-Through Contactors Cat. No. Explanation Bulletin 00F Open Type Feed-Through Contactor Feed-through construction Contactor can be field wired for single- or three-phase applications sizes 0 Available as components or a modular kit for faster delivery Product selection can be done via two options: Ordering a complete kit Ordering individual components Feed-through contactor includes a 0V AC coil and () N.O. auxiliary contact, as standard Table of Contents Modular Kits... Components... Factory Assembled... 0 Specifications... Full Load Currents of AC Motors... Approximate Dimensions... 0 Standards Compliance /EEMAC ICS UL 0 CSA C. No. size Available as factory assembled ABS /. American Bureau of Shipping UCSG CFR.0 IEEE EN/IEC 0-- Certifications CE Marked CSA Certified (LR) UL Listed (File No. E, Guide No. NLDX) Catalog Number Explanation For flexibility, devices may be ordered in a convenient modular kit or as individual components. A modular kit includes: Base contactor Selectable coil voltage Selectable options Modular Kit Example Cat. No. 00F B O D 0 a b c d e a A 0 B C D E b Enclosure Type Type O No enclosure Nominal Coil Voltage Voltage Frequency A B C D 0V 0V 0V 0V 0V 00V 0V 0V c 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz F V 0 Hz H 00 0V 0 Hz I V 0 Hz J V 0/0 Hz N 0V 0 Hz VL V DC VG 0V DC 0 d Number of Poles Voltage Three Power Poles and () N.O. Auxiliary Contact e Options Voltage Surge Suppressor for 0 or 0V AC Coil 0 () N.O. Auxiliary Contact () N.C. Auxiliary Contact Up to () combinations of auxiliary contacts can be selected. Example: indicates () N.O. and () N.C. contacts. 0 Publication 00-SG00A-EN-P
Bulletin 00F AC Feed-Through Contactors Product Selection - Modular Kit Product Selection of sizes 0 by Modular Kits Base Contactor Includes a 0V AC coil and () N.O. auxiliary contactor as standard. Continuous Ampere Rating [A] -Phase Motor Voltage Maximum Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating V 0V 00V 0V -Phase Motor Voltage 0 Hz 0 V 0 V Power Poles 00V AC Maximum 0 Hz Cat. No. 0 00F-AO 0... 0 0 00F-BO 0 0 00F-CO 0 0 0 0 0 0 00F-DO 0 0 0 0 00 00F-EO 0 0 00 0 00 See page for size. 0 Coil Voltage The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no. Example: Cat. No. 00F-AO 0 becomes Cat. No. 00F-AOD0. For other voltages, please consult your local Rockwell Automation sales office or Allen-Bradley distributor. [V] 0 0 0 0 0 0 0 0 0 0 00 AC, 0 Hz J D A N I B C AC, 0 Hz J D H A F B C DC VL VG VG DC voltage code is only available on size 0. When ordering a DC voltage code, add "C" to the catalog number. Example: 00FC-BOVL0. Note: The base contactor includes a 0V AC coil as standard. For all other voltages, a second coil will be included in the modular kit for field swap out. Options for Modular Kit Options Surge Suppressor for 0 or 0V AC Coil 0 () N.O. Auxiliary Contact () N.C. Auxiliary Contact Up to () combinations of auxiliary contacts can be selected. Example: indicates () N.O. and () N.C. contacts. Example: Cat. No. 00F-COD0--0 includes a size, -pole, contactor with a 0V AC coil, surge suppressor, and () N.O. auxiliary contact. Publication 00-SG00A-EN-P
Bulletin 00F AC Feed-Through Contactors Product Selection - Components Product Selection of sizes 0 by Components Base Contactor Coil Auxiliary Contact Contactor Surge Suppressor Base Contactor Continuous Ampere Rating [A] Cat. No. 0 00F-AOD0 00F-BOD0 00F-COD0 0 00F-DOD0 00F-EOD0 Coils 0 Cat. No. Cat. No. Cat. No. Cat. No. V 0/0 Hz CB0 CC0 CD0 CE0 0V 0 Hz, 0V 0 Hz CB CC CD CE 0V 0 Hz CB CC CD CE 0V 0 Hz, 0V 0 Hz CB CC CD CE V 0 Hz CB0 CC0 CD0 CE0 0V 0 Hz CB CC CD CE V 0 Hz CB CC CD CE 0V 0 Hz, 0V 0 Hz 0V 0 Hz, 00V 0 Hz CB CC CD CE CB CC CD CE V DC -BDC -CDC -DDC 0V DC -B0DC -C0DC -D0DC Note:The base contactor includes a 0V AC coil as standard. For all other voltages, select an alternate component coil for field installation. Auxiliary Contact Contactors Cat. No. N.O. 0 -A N.O. 0 -AA N.C. 0 -B N.C. 0 -BB N.O. and N.C. 0 -AB Surge Suppressor Cat. No. 0V AC -K0 0 0 V AC Varistor -KA0 0 Publication 00-SG00A-EN-P
Bulletin 00F AC Feed-Through Contactors Product Selection - Factory Assembled Product Selection of size as Factory Assembled Continuous Ampere Rating [A] -Phase Motor Voltage Maximum Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating V 0V 00V 0V -Phase Motor Voltage 0 Hz 0 V 0 V Power Poles 00V AC Maximum 0 Hz 0... 0 0 0 0 0 0 0 0 0 0 0 00 Cat. No. 0 00 0 00 00F-FO 0 See page for size 0. Coil Voltage The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no. Example: Cat. No. 00F-AO 0 becomes Cat. No. 00F-AOD0. [V] 0 0 0 0 0 0 0 0 0 0 00 AC, 0 Hz J D A N I B C AC, 0 Hz J D H A F B C DC VL VG VG 0 0 Publication 00-SG00A-EN-P
Bulletin 0 Full Voltage Starter Cat. No. Explanation Bulletin 0, with Eutectic Alloy Overload Relay Open Type without Enclosure Standards Compliance /EEMAC ICS UL 0 CSA C. No. ABS /. American Bureau of Shipping Bulletin 0 Open Type Full Voltage Starter Feed-through construction Starter can be field wired for single- or three-phase applications sizes 0 Available as components or as a modular kit for faster delivery Product selection can be done via two options: Ordering a complete kit Ordering individual components Starter includes a 0V AC coil and () N.O. auxiliary contact, as standard sizes 00, Available as factory assembled UCSG CFR.0 EN/IEC 0-- CE Marked Catalog Number Explanation For flexibility, devices may be ordered in a convenient modular kit or as individual components. A modular kit includes: Base contactor Selectable overload relay Selectable coil voltage Selectable options Table of Contents Modular Kits... Components... Factory Assembled... Specifications... Full Load Currents of AC Motors... Approximate Dimensions... 0 Certifications CSA Certified (LR) UL Listed (File No. E, Guide No. NLDX) Modular Kit Example Cat. No. a A 0 B C D E O b Enclosure Type Type No enclosure Nominal Coil Voltage Voltage Frequency A B C D 0V 0V 0V 0V 0V 00V 0V 0V c 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz 0 Hz F V 0 Hz H 00 0V 0 Hz I V 0 Hz J V 0/0 Hz N 0V 0 Hz VL V DC VG 0V DC 0 B O D AE blank a b c d e d Eutectic Overload Relay Eutectic Alloy E Plus Solid-State Overload Relay Full Load Current Adjustment Range [A] -Phase AC 0, 0..0 AE 0,.0.0 AF 0,. AG 0,,. AJ,, AL 0 AM 0 0 -Phase SE 0,.0.0 SF 0,. SG 0,,. SJ,, SL 0 A 0 e Options () N.O. Auxiliary Contact for use on Eutectic Overload Relay () N.C. Auxiliary Contact for use on Eutectic Overload Relay Surge Suppressor for 0 or 0V AC Coil () N.O. Auxiliary Contact for use on Contactor () N.C. Auxiliary Contact for use on Contactor Up to () combinations of auxiliary contacts can be selected. Example: indicates () N.O. and () N.C. contacts. Heater Elements Starters with eutectic alloy overload relays require heater elements. See the Industrial Controls catalog for heater element selection tables. 0 Publication 00-SG00A-EN-P
Bulletin 0 Full Voltage Starter Product Selection - Modular Kits Product Selection of sizes 0 by Modular Kits 0 Base Contactor Includes a 0V AC coil and () N.O. auxiliary contactor as standard. Heater Elements Starters with eutectic alloy overload relay require heater elements. See the Industtrial Controls catalog for heater element selection tables. Coil Voltage The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no. Example: Cat. No. 0-BA - becomes Cat. No. 0-BAD-. [V] 0 0 0 0 0 0 0 0 0 0 00 Options for Modular Kit Overload Relay Use to order solid-state overload relay. Do not use when ordering eutectic alloy overload relay. The cat. no. as listed is incomplete, select an overload relay code from the table below to complete the cat. no. Example: Cat. No. 0-BOD- becomes Cat. No. 0-BOD-AE. Full Load Current (-Phase) (-Phase) Range [A] 0 0 0..0 AC AC.0.0 AE AE SE SE. AF AF SF SF. AG AG AG SG SG SG AJ AJ AJ SJ SJ SJ 0 AL SL 0 0 AM Up to () combinations of auxiliary contacts can be selected. Example: indicates () N.O. and () N.C. contacts. Example: Cat. No. 0-BOD-AF--0 includes a size, -pole, contactor with a 0V AC coil, surge suppressor, and () auxiliary contacts, () N.O. and () N.C.. Options () N.O. Auxiliary Contact for use on Eutectic Overload Relay A Continuous Ampere Rating [A] -Phase Motor Voltage () N.C. Auxiliary Contact for use on Eutectic Overload Relay Surge Suppressor for 0 or 0V AC Coil 0 () N.O. Auxiliary Contact for use on Contactor () N.C. Auxiliary Contact for use on Contactor Maximum Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating V 0V 00V 0V -Phase Motor Voltage Publication 00-SG00A-EN-P Power Poles 00V AC Maximum 0 Hz 0 Hz 0 V 0 V Cat. No. 00 /.. 0 0-AO -.. 0 0 0-BO -. 0 0-CO - 0. 0 0 0 0-DO - 0 0 00 0-EO - 0 00 0 00 0 0 00 00 00 0 00 00 00 0 0 00 00 00 See page for sizes 00,. AC, 0 Hz J D A N I B C AC, 0 Hz J D H A F B C DC VL VG VG DC voltage code is only available for sizes 0. When ordering a DC voltage code, add "DC" to the catalog number. Example: 0DC-BOVL.
Bulletin 0 Full Voltage Starter Product Selection - Components Product Selection of sizes 0 by Components Base Contactor Eutectic Overload Relay Solid-State Overload Relay Coil Auxiliary Contact Contactor Surge Suppressor Auxiliary Contact Eutectic Overload Relay Base Contactor Continuous Ampere Rating [A] Cat. No. 0 00F-AOD0 00F-BOD0 00F-COD0 0 00F-DOD0 00F-EOD0 Eutectic Overload Relays Cat. No. 0, -EUTB -EUTC -EUTD -EUTE Solid-State E Plus Overload Relays Current Range [A] Cat. No. -Phase 0, 0..0 -EEBC 0,.0.0 -EECC 0,. -EEDC 0. -EEEC 0 -EEFC -EEFD 0 -EEGD 0 0 -EEHE -Phase 0,.0.0 S-EEPC 0,. S-EERC 0. S-EESC 0 S-EETC 0 S-EEUD Coils 0 Cat. No. Cat. No. Cat. No. Cat. No. V 0/0 Hz CB0 CC0 CD0 CE0 0V 0 Hz, 0V 0 Hz CB CC CD CE 0V 0 Hz CB CC CD CE 0V 0 Hz, 0V 0 Hz CB CC CD CE V 0 Hz CB0 CC0 CD0 CE0 0V 0 Hz CB CC CD CE V 0 Hz CB CC CD CE 0V 0 Hz, 0V 0 Hz 0V 0 Hz, 00V 0 Hz CB CC CD CE CB CC CD CE V DC -BDC -CDC -DDC 0V DC -B0DC -C0DC -D0DC Auxiliary Contact Contactors Surge Suppressor Cat. No. 0V AC -K0 0 0 V AC Varistor -KA0 Cat. No. N.O. 0 -A N.O. 0 -AA N.C. 0 -B N.C. 0 -BB N.O. and N.C. 0 -AB 0 Overload Accessory Auxiliary Contact (For eutectic alloy overload relays only ) Cat. No. N.O. -A0 0 N.C. -B0 N.O. -A N.C. -B Auxiliary contact for solid-state overload relays is included in the product. Auxiliary contact mounted on right-hand side of overload relay provides N.O. contact function. Auxiliary contact mounted on left-hand side of overload relay provides N.C. contact function. To be mounted on right-hand side of overload to provide additional AC contact function. Publication 00-SG00A-EN-P
Bulletin 0 Full Voltage Starter Product Selection - Factory Assembled Product Selection of sizes 00, as Factory Assembled Heater Elements Starters with eutectic alloy overload relay require heater elements. See the Industtrial Controls catalog for heater element selection tables. Continuous Ampere Rating [A] -Phase Motor Voltage Maximum Horsepower Rating Full Load Current Must Not Exceed Continuous Ampere Rating V 0V 00V 0V -Phase Motor Voltage Power Poles 00V AC Maximum 0 Hz 0 Hz 0 V 0 V Cat. No. 00 /.. 0-TO - 0.. 0 0. 0 0. 0 0 0 0 0 00 0 00 0 00 0-FO - 0 0 00 00 00 0-GO - 0 00 00 00 0-HO - 0 0-JO - 0 00 00 00 0-KO - See page for sizes 0. Coil Voltage The cat. no. as listed is incomplete. Select a coil voltage code from the table below to complete the cat. no. Example: Cat. No. 0-FO - becomes Cat. No. 0-FOD-. [V] 0 0 0 0 0 0 0 0 0 0 00 AC, 0 Hz J D A N I B C AC, 0 Hz J D H A F B C DC VL VG VG 0 E Plus Solid-State Overload Relay (Selectable Class 0, 0, or 0) (Automatic/Manual Reset) 00 Full Load Current Adjustment Range (A) 0. 0. 0..0.0.0. Overload Relay Class 0,, 0, 0 AA AC AE AF PW 0 00 AN YD PW 0 00 AR YD 0 AT AU 00 0 AV These solid-state overload relays have an interposing relay with a 0V AC coil. Publication 00-SG00A-EN-P
Bulletin 00 Line AC Contactors and Starters Specifications Electrical Ratings 00 0 P Load Voltage [V] 00 0 0 0 00 0 0 0 00 0 0 0 0 00 0 0 0 00 0 0 0 00 0 0 0 00 0 0 0 00 0 0 0 0 0 0 0 0 0 Continuous Current Rating [A] Service Limit Current Rating [A] 0 0 0 0 0 00 0 0 Maximum Hp Rating (Non-plugging and non-jogging duty) Maximum Hp Rating (Plugging and jogging duty) Transformer Primary Switching kva Rating (Inrush Current 0 times Continuous Current) Transformer Primary Switching kva Rating (Inrush Current = 0 to 0 times Continuous Current) Capacitor Switching kvar Maximum Circuit Closing Inrush Current [A] Peak Including Offset Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø / -/ -/ -/ -/ -/ -/ -/ 0 0 0 0 0 0 0 0 0 0 00 00 00 0 00 00 0 00 00 00 00 00 00 00 0 00 00 00 / / / -/ -/ Service-Limit Current Ratings The service-limit current ratings shown represent the maximum rms current, in amperes, which the controller shall be permitted to carry for protracted periods in normal service. At service-limit current ratings, temperature rises shall be permitted to exceed those obtained by testing the controller at its continuous current rating. The current rating of overload relays or the trip current of other motor protective devices used shall not exceed the service-limit current rating of the controller. Plugging or Jogging Service The listed horsepower ratings are recommended for those applications requiring repeated interruption of stalled motor current encountered in rapid motor reversal in excess of five openings or closings per minute and shall not be more than ten in a ten minute period. If maximum available current (at capacitor terminals) is greater than 000 A, please contact your local Rockwell Automation sales office, Allen-Bradley distributor, or ICS- Standard. -/ -/ -/ -/ -/ -/ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00 00 0.......... 0.. 0. 0......... 0 0. 0... 0......... 0... 0.............0 0 0. 0 0 00 0 0 00 0 0 00 0 0 00 0 0 0 0 0 0 0 0 Publication 00-SG00A-EN-P
0 Bulletin 00 Line AC Contactors and Starters Specifications, Continued Mechanical Ratings Short Circuit Rating Mechanical Life (Millions of Operations) Maximum Number of Auxiliary Contacts Pick-up (Average) Operating Time [ms] Drop-out (Average) 0 0 0 0 0 0 0 0 00 0 0 Construction Power Contacts Contact Material Auxiliary Contacts Type of Power Terminal Wire for Power Terminals Required Torque on Power Terminal Wire Clamps and Pressure Connectors or Lugs 0 # 0 AWG 0 lb in Saddle or wire clamps # AWG 0 lb in # AWG lb in # /0 AWG 0 lb in Pressure terminals # /0 AWG lb in Silver alloy Silver # AWG 00 MCM lb in Lugs sold separately. See [S-]. Direct bus connections only. 00 Pressure terminals # 0 AWG lb in Requirements for Sizing of Wire All wire rated F ( C) or higher must be sized per the local Electrical for F ( C) wire. Environmental Operating Temperature Range Altitude Corrosion-Resistance Operating Position 0 Starters with eutectic alloy Overload relay + F ( + C) Vertical Starters with SMP All metal parts are treated for 0 000 feet before derating Overload relay corrosion-resistance + F Horizontal 00 ( + C) (provided condensation is prevented) Vertical Horizontal Combination contactors and starters with disconnect switch: Bulletin 0, 0,, E, F, G, and X Combination Contactors and Starters with Disconnect Switch: Bulletin 0, 0,, E, F, G, and X Available Short Circuit Amperes RMS Fuse Type Symmetrical [A] Maximum Voltage [V] 0 H, K 000 H, K 0 000 0 J, R 00 000 00 L 000 L 000 Publication 00-SG00A-EN-P
Bulletin 00 Line AC Contactors and Starters Specifications, Continued AC Coil Data Operating Volt Amperes Burden [VA] Inrush 0 Hz Coils Sealed Heat Dissipation [W] 00 0. 0.. ( poles) 0. ( poles). ( poles) 0 0 ( poles) 0 0 ( poles). ( poles) 0. (Series L) 0. 0. (Interposing relay).. Economized DC Coil (Interposing relay).0. Economized DC Coil (Interposing relay).0. Economized DC Coil (Interposing relay).0 Coil Operating Limits 0% This rating is for the size contactor coil only. All starters are shipped with an interposing relay as standard. starters are shipped with a 0 VA control circuit transformer and an interposing relay with a 0V coil. Voltage is then rectified to DC for the contactor coil. starters are shipped with a 0 VA control circuit transformer and an interposing relay with a 0V coil. Voltage is then rectified to DC for the contactor coil. starters are shipped with a 0 VA control circuit transformer and an interposing relay with a 0V coil. Voltage is then rectified to DC for the contactor coil. Auxiliary Contacts ( A00 and P00) Bulletin, AC Rating Designation A00 Maximum Voltage 0 or 0 Hz Maximum AC Contact Rating Per Pole [A] Continuous [VA] Carrying Current Make Break [A] Make Break 0 0 0 00 0 0 0 0 00 0 0. 0 00 0 00. 0 00 0 Maximum DC Contact Rating Per Pole for, Auxiliary Contacts (Maximum Continuous Carrying Current is A) DC Rating Designation V DC 0V DC 00V DC P00 0. A. A (Requires Contacts in Series) 0. A (Requires Contacts in Series) 0 Publication 00-SG00A-EN-P
Bulletin 00 Line AC Contactors and Starters Specifications, Continued Load-Life Curves Bulletin 00 Line contactors and starters are designed to provide superior performance in a variety of applications. These load-life curves are based on Rockwell Automation tests according to the requirements defined in IEC -. Actual contact life may vary based on the application, duty cycle, and environmental conditions from that indicated by the curves. To find the contactor s estimated electrical life, follow these guidelines: Choose the appropriate graph that most closely approximates the utilization category of the application. Locate the intersection of the life-load curve of the appropriate contactor with the application s operational current (I e ) found on the horizontal axis. Read the estimated contact life in millions of operations along the vertical axis. Contact Life for Mixed Utilization Categories AC and AC In many applications, the utilization category cannot be defined as either purely AC or AC. In those applications, the electrical life of the contactor can be estimated from the following equation: L = mixed L AC L AC AC + P ( ) L AC Where: L mixed = Approximate contact life for a mixed AC/AC utilization category application L AC = Approximate contact life in operations for AC utilization category (from AC life-load curves below) L AC = Approximate contact life in operations for AC utilization category (from AC life-load curves below) P AC = Percentage of AC operations Utilization Categories CategoryTypical Duty ACStarting of squirrel cage motors and switching off only after the motor is up to speed. ACStarting of squirrel cage motors with inching and plugging duty. Bulletin 00 Load/ Life Curves AC and AC 0M M M SIZE AC SIZE 0M M M AC M M M M OPERATING CYCLES M 00K 00K 00K 00K 00K 0K OPERATING CYCLES M 00K 00K 00K 00K 00K 0K 0K 0K 0 0K 0K 0K 0K 0K OPERATIONAL CURRENT le (APMERES) 0K OPERATIONAL CURRENT le (APMERES) Publication 00-SG00A-EN-P
Bulletin 00 Line AC Contactors and Starters Specifications, Continued Full Load Currents of -Phase, 0 Hertz AC Induction Motors The full load currents listed below are average values for horsepower rated motors of several manufacturers at the more common rated voltages and speeds. These average values, along with the similar values listed in the U. S. National Electrical (NEC), should be used only as a guide for selecting suitable components for the Motor Branch Circuit. The rated full load current, shown on the motor nameplate, may vary considerably from the listed value depending on the specific motor design. ATTENTION: The motor nameplate full load current should always be used in determining the rating of the devices used for Motor Running Overcurrent Protection. Full Load Current [A] Full Load Current [A] HP RPM 0V 0V 0V 00V 00V 000V HP RPM 0V 0V 0V 00V 00V 000V / / / / -/ -/ 0 0 0 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.0......0........0.0.0....0. 0.......0.....0..... 0...0....0.0.0....0.0.0.0.00.0.0....0....0.00.0 0........... 0............0 0 0 0. 0.0 0.0 0. 0. 0. 0.0.0...0...........00..0.0..0. 0...... 0..... 0.......0 0.. 0. 0. 0. 0. 0. 0. 0. 0..00.00.0......0.....0..0..0.... 0. 0.....0 0. 0...... 0... 0.. Synchronous speed nameplate is usually less due to slip.............0.. 0.0 0. 0....0............0.... 0 0 00 0 00 0 00 0 00 0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0 00 00 00 0 00 0 00 00 00 0 00 0 00 00 00 0 00 0 00 00 00 0 00 0 0 00 00 00 00 0 0 00 00 00 00 00 00 00 00 00 00 00 00 Publication 00-SG00A-EN-P 0 0 0 0 0 0 00 0 0 0 0 0 0 00 0 0 0......... 0 0 0.0. 0.... 0...... 0 0 0 0 0 0 0.........0..0.0....... 0....0...0.0..0..0..0 0.......0. 0.0.0 0.0...0......0.... 0.0 0...0.......0..0... 0. 0.......0.0.........0. 0.... 0
Bulletin 00 Line AC Contactors and Starters Approximate Dimensions Approximate dimensions are shown in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. Open Type without Enclosure for Bulletin 00 and 00F Contactors 0 0 Number of Switching Poles A Width -/ (0.) -/ () -/ () -/ (00) -/ () -/ (0) -/ (.) -/ (0.) -/ (.) () -/ (0.) 0-/ (.) B Height -/ () -/ () 0-/ () -/ (0) For Feed-Through Wiring this dimension is -/ in. ( mm). Dimensions in Inches (Millimeters) C Depth D E -/ () -/ (0) -/ (.) -/ (.) -/ (0) -/ () -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) Approximate Shipping Weight in lbs (kg) (.) -/ (.) -/ (.) (.) -/ (.) -/ (.). (.) (.) () (0). (.). () 0 Publication 00-SG00A-EN-P
Bulletin 00 Line AC Contactors and Starters Approximate Dimensions, Continued Approximate dimensions are shown in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. Open Type without Enclosure for Bulletin 0 Full Voltage Starters with Eutectic Alloy and Solid-State Overload Relay (0) / (.) Dia. Mtg. Holes -/ () -/ () / () (.) 00 with Eutectic Alloy Overload Relay -/ () / (.) Reset Travel A E D B (.) Reset Travel 0 with Eutectic Alloy C.0 (.) 0. () 0. (.). (.) 0. (.) Max. Reset Travel. (0.). (0.). (.) 00 with Solid-State Overload Relay Bul. 0-TO_-A with Bul. A Width B Height Dimensions in Inches (Millimeters) C Relay Reset Depth D E Approx. Shipping Weight in lbs (kg) 00 0. (0.) 0 -/ (0.) -/ () -/ () -/ (0) -/ (0) -/ (.) -/ (00) -/ () -/ () -/ (0) -/ (0) -/ (.) -/ () -/ () -/ () -/ (0) -/ (0) (.) () -/ () -/ () -/ (0) -/ (0) -/ (0.) -/ () -/ () -/ () -/ (0) -/ (0) (.) -/ () -/ () -/ () -/ (0) -/ (00) 0 () -/ () 0-/ () -/ () -/ () () () -/ () -/ (00) -/ () -/ () 0 (0) 0 () () -/ () () See drawing for dimensions. 0 Publication 00-SG00A-EN-P
Bulletin 00 Line AC Contactors and Starters Approximate Dimensions, Continued Approximate dimensions are shown in inches (millimeters). Dimensions are not intended to be used for manufacturing purposes. Open Type without Enclosure for Bulletin 0 Full Voltage Starters with Solid-State Overload Relay 0 0 Overload Relay Solid-State E Plus Solid-State E Plus Solid-State E Plus Solid-State E Plus Solid-State E Plus Solid-State E Plus Solid-State E Plus Solid-State E Plus A Width -/ () -/ () -/ (00) -/ (00) -/ () -/ () -/ () -/ () B Height -/ () -/ () -/ () 0-/ () -/ () -/ (0) -/ () -/ () Dimensions in Inches (Millimeters) C Depth D E -/ () -/ () -/ () -/ (0) -/ () -/ () -/ () -/ () -/ (0) -/ () -/ () 0-/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) -/ (0) F Relay Reset Depth -/ () -/ () -/ () -/ () -/ () -/ () -/ () -/ () Approx. Shipping Weight in lbs (kg). (.).0 (.).0 (.). (.) Publication 00-SG00A-EN-P
MicroLogix Controller with DeviceNet Interface RSNetWorx software PCMCIA for DeviceNet Control Tower Stack Light DeviceNet ArmorBlock MaXum PanelView Component 00, 00, 00 or 000 0 with E Plus Solid-State Overload Relay 0 with E or E Plus Solid-State Overload Relay PowerFlex AC Drive D Block I/O Series 0 Photoelectric Sensor Bulletin 0T Limit Switch 00T/H with DeviceNet E Plus Solid-State Overload Relays The Bulletin E Plus electronic overload relays set a new standard for entry level solid-state motor protection. The solid-state design provides accurate, reliable and repeatable protection. Application flexibility is offered through a wide : adjustment range and DIP switch adjustments. Rockwell Automation exclusive insert molded power stabs deliver unmatched robust connections in starter assemblies. Publication 00-SG00A-EN-P September 00 Copyright 00 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.