R-600a - R-134a - Blends - R-290 1) - COMPRESSOR TYPE 1.1) - Static Cooling (S) The compressor does not require fan cooling and must be installed in such as way so as to allow cooling through ambient air, thus, preventing over heating. 1.2) - Fan Cooling (F) The compressor requires a minimum air flow of 3 m/s for its cooling. Flows of lesser values must be evaluated through laboratory tests. 1.3) - Oil Cooling (OC) Blends Condensing pressure must not exceed 14.5 kgf/cm 2 (206 psig) when in continuous operation at maximum expected ambient temperature (43 o C) and the peak condensing temperature must not exceed 18.2 kgf/cm 2 gauge (259 psig). R-134a Condensing pressure must not exceed 16.1 kgf/cm 2 (229 psig) when in continuous operation at maximum expected ambient temperature (43 o C) and the peak condensing temperature must not exceed 20.53 kgf/cm 2 gauge (292 psig). 2.4) - Evaporating Temperature Range The compressor uses an internal coil immersed in oils and connected to the hermetic system to help with compressor cooling. The use of more efficient compressors can eliminate the need for oil cooling. APPLICATION LBP TEMPERATURE -35ºC to -10ºC ( -31ºF to +14ºF ) 2) - CONDITIONS 2.1) - Starting and Operating oltage The compressors start at 90% of the nominal voltage Equalized pressures of up to 4 kgf/cm 2 manometric gauge (58 psig) (R-600a). Equalized pressures of up to 5 kgf/cm² manometric gauge (71 psig) (Blends). Equalized pressures of up to 6 kgf/cm² manometric gauge (85 psig) (R-134a). Equalized pressures of up to 9 kgf/cm² manometric gauge (128 psig) (R-290). Depending on the working condition and system characteristics, the compressor can operate at even lower voltages, see perfomance table. 2.2) - inding Temperature The winding temperature should not exceed 130 o C (266 o F) when in continuous operation. For the winding temperature evaluation we recommend the Ohmic Resistance Measurement Method. (According to Application Manual Embraco). 2.3) - Condensing Pressure Limit The compressors must operate in accordance with that described below: R-600a Condensing pressure must not exceed 7.7 kgf/cm 2 (113 psig) when in continuous operation at maximum expected ambient temperature (43 o C) and the peak condensing temperature must not exceed 9.8 kgf/cm 2 gauge (145 psig). L/MBP M/HBP HBP L/M/HBP 3) - MOTOR The compressors in the performance table are equipped with monophase, induction motors. 3.1) - Motor Torque The compressor motors are denominated: LST - Low Starting Torque - used in systems with capillary tube HST - High Starting Torque - used in systems with expansion valve or with capillary tube 3.2) - Types of Electric Motors RSIR (PTCSIR) - Resistive Start - Inductive Run Does not use capacitors CSIR - Capacitive Start - Inductive Run Uses electrolytic capacitor (starting) -35ºC to -5ºC ( -31ºF to +23ºF ) -10ºC to +15ºC ( 14ºF to +59ºF ) -5ºC to +15ºC ( 23ºF to +59ºF ) -35ºC to +15ºC ( -31ºF to +59ºF ) RSCR (PTCSCR) - Resistive Start - Capacitive Run Uses permanent capacitor (running) CSR (CSCR) - Capacitive Start & Run Uses electrolytic (starting) and permanent capacitor at the same time used with 4 terminal PTC 2
9) - PERFORMANCE TABLES R-134a - L/MBP - 60Hz OLTAGE OIL ISCOSITY EM 20HHR 115-127 60Hz L/M/HBP 2.27 98-140 S/F ISO22 221 2.00 EM 20HHR 220-240 50-60Hz L/M/HBP 2.27 187-242 S/F ISO22 216 1.96 EMI 28HER 115-127 60Hz LBP 3.00 98-140 S ISO10 61 0.92 EMI 28HER 220-240 50-60Hz LBP 3.00 198-242 S ISO10 61 0.92 EMI 30HER 115-127 60Hz LBP 3.00 98-140 S ISO10 66 0.95 EMI 30HER 220-240 50-60Hz LBP 3.00 98-140 S ISO10 66 0.95 EM 30HHR 115 60Hz L/M/HBP 3.00 97-135 S/F ISO22 301 1.98 EM 30HHR 220-240 50-60Hz L/M/HBP 3.00 187-242 S/F ISO22 299 2.00 EMT 30HSC 115 60Hz LBP 3.00 103-135 S ISO10 67 1.00 EMU 30HSC 115 60Hz LBP 3.00 103-135 S ISO10 71 1.08 EMU 30HER 115-127 60Hz LBP 3.00 98-140 S ISO10 75 1.06 EMU 30HER 220-240 50-60Hz LBP 3.00 187-242 S ISO10 75 1.06 EMI 40HNR 115-127 60Hz LBP 3.77 98-140 S ISO10 81 0.96 EMI 40HNR 220 50-60Hz LBP 3.77 187-242 S ISO10 81 0.96 EM 45HHR 115-127 60Hz L/M/HBP 3.77 98-140 S/F ISO22 299 2.00 EM 45HNR 220 50-60Hz LBP 3.77 98-140 S ISO10 91 0.93 EMI 45HER 220-240 50-60Hz LBP 3.77 191-242 S ISO10 91 1.04 EMI 45HER 115-127 60Hz LBP 4.08 103-135 S ISO10 94 1.00 EMU 45HEP 100 50-60Hz LBP 3.77 85-110 S ISO10 95 1.04 EMU 45HSC 220-240 50-60Hz LBP 3.77 187-242 S ISO10 97 1.14 EMU 45HER 115-127 60Hz LBP 3.77 98-140 S ISO10 98 1.07 EMU 45HER 220-240 50-60Hz LBP 3.77 191-242 S ISO10 98 1.08 EMU 45HSC 115-127 60Hz LBP 3.77 98-140 S ISO10 98 1.15 EMY 45HER 115-127 60Hz LBP 3.77 103-140 S ISO10 98 1.12 EMY 45HSC 115-127 60Hz LBP 3.77 103-140 S ISO10 98 1.22 EM 55HNR 115-127 60Hz LBP 4.60 103-135 S ISO22 110 0.94 EM 55HNR 220 50-60Hz LBP 4.60 103-135 S/F ISO22 110 0.94 EMI 55HER 115-127 60Hz LBP 4.60 98-140 S/F ISO22 110 1.03 EMI 55HER 220 50-60Hz LBP 4.60 198-242 S/F ISO22 110 1.03 EMI 60HER 115-127 60Hz LBP 4.99 98-135 S ISO10 124 0.99 EMI 60HER 220 50-60Hz LBP 4.99 98-135 S ISO10 124 0.99 EMU 60HEP 100 50-60Hz LBP 4.99 85-110 S ISO10 128 1.09 EMU 60HSC 115-127 60Hz LBP 4.99 103-140 S ISO10 128 1.15 EMY 60HER 115-127 60Hz LBP 4.99 103-140 S ISO10 132 1.17 EMY 60HSC 115-127 60Hz LBP 4.99 103-140 S ISO10 132 1.23 EMZ 60HSC 115-127 60Hz LBP 4.99 98-140 S ISO10 132 1.30 EGYS 60HLP 115-127 60Hz LBP 5.09 98-140 S ISO10 132 1.28 EGZS 60HLP 115-127 60Hz LBP 5.09 98-140 S ISO10 132 1.39 EGX 60HLC 115-127 60Hz LBP 5.09 98-140 S ISO10 132 1.41 EM 65HHC 115 60Hz L/M/HBP 5.54 103-135 S/F ISO22 564 2.18 EM 65HNR 115-127 60Hz L/MBP 5.54 103-140 F ISO10 141 0.91 FFI 6HAK 220 50-60Hz L/MBP 6.23 98-135 S ISO22 147 0.99 FF 6HAK 115-127 60Hz LBP 6.23 98-140 S ISO10 147 1.12 FF 6HAK 220 50-60Hz LBP 6.23 187-242 S ISO10 147 1.12 EMY 70HER 115-127 60Hz LBP 5.72 98-140 S ISO10 147 1.11 EMY 70HER 220 60Hz LBP 5.72 187-242 S ISO10 147 1.11 EMY 70HSC 115-127 60Hz LBP 5.72 103-140 S ISO10 147 1.22 FFI 6HAK 115-127 60Hz L/MBP 6.23 98-135 S ISO22 147 0.99 EMX 70HSC 115-127 60Hz LBP 5.96 98-140 S ISO10 150 1.33 FF 7.5HBK 115 60Hz L/M/HBP 6.92 103-135 S ISO22 547 1.84 / 4
R-134a - L/MBP - 60Hz OLTAGE OIL ISCOSITY EGAS 70HLR 115-127 60Hz LBP 5.56 98-140 S ISO10 151 1.25 EGAS 70HLR 220-240 50-60Hz LBP 5.56 198-255 S ISO10 151 1.25 EGUS 70HLP 115-127 60Hz LBP 5.56 98-140 S ISO10 151 1.29 EGYS 70HLP 115-127 60Hz LBP 5.56 98-140 S ISO10 151 1.31 EGZS 70HLC 220-240 50-60Hz LBP 5.56 198-255 S ISO7 151 1.43 EGZS 70HLP 115-127 60Hz LBP 5.56 98-140 S ISO10 151 1.41 EGX 70HLC 115-127 60Hz LBP 5.56 98-140 S ISO10 151 1.44 FGI 85HAK 115-127 60Hz LBP 7.15 93-121 S ISO22 152 0.98 EMI 70HER 220 60Hz LBP 5.89 187-242 S/F ISO10 153 1.06 EMI 70HNR 115 60Hz L/MBP 5.89 103-127 S/F ISO10 153 0.97 FGS 70HA 115-127 60Hz LBP 6.36 103-140 S ISO10 153 1.20 FGS 70HA 220-240 50-60Hz LBP 6.36 198-242 S ISO10 154 1.20 FF 8.5HBK 115 60Hz L/M/HBP 7.95 103-135 S/F ISO22 681 1.79 FF 8.5HBK 220 60Hz L/M/HBP 7.95 198-242 S/F ISO22 681 1.77 FFU 70HAK 115-127 60Hz L/MBP 6.36 98-140 S/F ISO10 163 1.18 FFU 70HAK 220-240 50-60Hz L/MBP 6.36 98-140 S/F ISO10 163 1.18 FGU 70HA 115-127 60Hz LBP 6.36 98-140 S ISO10 163 1.26 FFI 7.5HAK 115 60Hz L/MBP 6.76 98-135 S ISO10 166 1.08 FF 7.5HAK 115-127 60Hz L/MBP 6.76 98-140 S ISO10 166 1.16 FF 7.5HAK 220-240 50-60Hz L/MBP 6.76 187-242 S ISO10 166 1.16 FFI 7.5HAK 220-240 50-60Hz L/MBP 6.76 187-242 S ISO10 167 1.09 FFU 80HAK 115-127 60Hz L/MBP 6.76 98-140 S/F ISO10 177 1.18 FFU 80HAK 220-240 50-60Hz L/MBP 6.76 187-242 S/F ISO10 177 1.18 FGU 80HA 115-127 60Hz LBP 6.76 98-140 S ISO10 177 1.27 FGU 80HA 220-240 50-60Hz LBP 6.76 187-242 S ISO10 177 1.27 EGAS 80HLR 115-127 60Hz LBP 6.36 98-140 S ISO10 178 1.22 EGAS 80HLR 220-240 50-60Hz LBP 6.36 198-242 S ISO10 178 1.27 EGUS 80HLP 115-127 60Hz LBP 6.36 98-140 S ISO10 178 1.29 EGYS 80HLP 115-127 60Hz LBP 6.36 98-140 S ISO10 178 1.32 EGZS 80HLC 220-240 50-60Hz LBP 6.36 198-255 S ISO10 178 1.42 EGZS 80HLP 115-127 60Hz LBP 6.36 103-140 S ISO10 178 1.31 EGX 80HLC 115-127 60Hz LBP 6.36 98-140 S ISO10 178 1.45 FGS 80HA 115-127 60Hz LBP 7.15 103-140 S ISO10 178 1.23 FGS 80HA 220-240 50-60Hz LBP 7.15 198-242 S ISO10 179 1.23 FFI 8.5HAK 115-127 60Hz L/MBP 7.15 98-135 S ISO10 180 1.12 FFI 8.5HAK 220-240 50-60Hz L/MBP 7.15 187-242 S/F ISO10 180 1.12 FF 8.5HAK 115-127 60Hz L/MBP 7.15 98-140 S ISO10 180 1.16 FF 8.5HAK 220-240 50-60Hz L/MBP 7.15 187-242 S ISO10 180 1.16 FF 10HBK 115 60Hz L/M/HBP 9.04 103-127 S/F ISO22 766 1.77 FF 10HBK 220 60Hz L/M/HBP 9.04 198-242 S/F ISO22 766 1.77 FGS 90HA 115-127 60Hz LBP 7.95 103-140 S ISO10 204 1.22 FGS 90HA 220-240 50-60Hz LBP 7.95 198-242 S ISO10 204 1.23 FGU 90HA 115-127 60Hz LBP 7.55 98-140 S ISO10 204 1.26 EGUS 90HLP 115-127 60Hz LBP 7.15 103-140 S ISO10 206 1.30 EGYS 90HLP 115-127 60Hz LBP 7.15 103-140 S ISO7 206 1.33 EGZS 90HLC 220-240 50-60Hz LBP 7.15 198-255 S ISO10 206 1.42 EGZS 90HLP 115-127 60Hz LBP 7.15 98-140 S ISO10 206 1.41 EGX 90HLC 115-127 60Hz LBP 7.15 98-140 S ISO10 206 1.45 FFU 100HAK 115-127 60Hz L/MBP 7.95 98-140 S ISO10 214 1.16 FFU 100HAK 220-240 50-60Hz L/MBP 7.95 198-242 S/F ISO10 214 1.16 FFI 10HAK 115-127 60Hz L/MBP 9.04 103-135 S ISO22 223 1.12 / 6
R-134a - L/MBP - 60Hz OLTAGE OIL ISCOSITY FFI 10HAK 220-230 50-60Hz L/MBP 9.04 187-242 S ISO22 223 1.12 EGZ 100HLP 115-127 60Hz LBP 7.95 103-140 S ISO10 224 1.30 EGAS 100HLR 220-240 50-60Hz LBP 7.95 198-255 S ISO10 228 1.26 EGZS 100HLC 220-240 50-60Hz LBP 7.95 198-255 S ISO10 228 1.41 EGZS 100HLP 115-127 60Hz LBP 7.95 98-140 S ISO10 228 1.38 FGS 100HA 115-127 60Hz LBP 9.04 103-135 S ISO10 231 1.23 FGS 100HA 220-240 50-60Hz LBP 9.04 198-242 S ISO22 231 1.22 FFI 12HBX 115-127 60Hz L/M/HBP 11.14 103-135 F ISO22 1149 2.01 FFI 12HBX 220 60Hz L/M/HBP 11.14 198-242 S/F ISO22 1149 1.80 FFU 130HAX 115-127 60Hz L/MBP 10.61 98-140 F ISO10 271 1.11 FFU 130HAX 220 60Hz L/MBP 10.61 198-242 F ISO10 271 1.09 / R-134a - M/HBP - 60Hz OLTAGE OIL ISCOSITY EM 20HHR 220-240 50-60Hz L/M/HBP 2.27 187-242 S/F ISO22 216 1.96 EM 20HHR 115-127 60Hz L/M/HBP 2.27 98-140 S/F ISO22 221 2.00 EM 30HHR 220-240 50-60Hz L/M/HBP 3.00 187-242 S/F ISO22 299 2.00 EM 30HHR 115 60Hz L/M/HBP 3.00 97-135 S/F ISO22 301 1.98 EM 45HHR 115-127 60Hz L/M/HBP 3.77 98-140 S/F ISO22 299 2.00 EM 55HHR 115 60Hz HBP 4.60 98-135 F ISO22 466 1.99 EM 55HHR 220-240 50-60Hz HBP 4.60 198-242 F ISO22 466 2.05 EM 65HHC 115 60Hz L/M/HBP 5.54 103-135 S/F ISO22 564 2.18 EM 65HHR 115 60Hz M/HBP 5.54 103-135 F ISO22 564 1.98 EM 65HHR 220 50-60Hz M/HBP 5.54 103-135 F ISO22 567 1.97 FF 7.5HBK 115 60Hz L/M/HBP 6.92 103-135 S ISO22 547 1.84 FF 8.5HBK 115 60Hz L/M/HBP 7.95 103-135 S/F ISO22 681 1.79 FF 8.5HBK 220 60Hz L/M/HBP 7.95 198-242 S/F ISO22 681 1.77 FF 10HBK 115 60Hz L/M/HBP 9.04 103-127 S/F ISO22 766 1.77 FF 10HBK 220 60Hz L/M/HBP 9.04 198-242 S/F ISO22 766 1.77 FFI 12HBX 115-127 60Hz L/M/HBP 11.14 103-135 F ISO22 1149 2.01 FFI 12HBX 220 60Hz L/M/HBP 11.14 198-242 S/F ISO22 1149 1.80 / R-600a - L/MBP - 60Hz OLTAGE OIL ISCOSITY EMT 35CLP 100 50-60Hz LBP 4.50 85-110 S ISO7 72 1.11 EMU 45CLP 100 50-60Hz LBP 5.96 85-110 S ISO10 91 1.14 EGS 75CLP 115-127 60Hz LBP 10.08 98-140 S ISO7 164 1.24 EGS 75CLP 220-240 50-60Hz LBP 10.08 187-242 S ISO7 164 1.24 EGS 80CLP 115-127 60Hz L/MBP 11.14 98-140 S ISO10 187 1.22 EGS 80CLP 220-240 50-60Hz L/MBP 11.14 187-242 S ISO10 187 1.22 EGS 90CLP 220-240 50-60Hz LBP 12.21 187-242 S ISO7 201 1.22 / 8
Blends - L/MBP - 60Hz OLTAGE OIL ISCOSITY EM 20BR 115 60Hz L/M/HBP 2.27 98-135 S/F ISO32 208 1.89 EM 20BR 220 60Hz L/M/HBP 2.27 187-242 S/F ISO32 208 1.89 EM 30NR 115 60Hz LBP 3.00 103-127 S ISO32 71 0.82 EM 30NR 220 60Hz LBP 3.00 198-242 S ISO32 71 0.82 EM 30SC 115 60Hz LBP 3.00 103-135 S ISO32 71 0.93 EM 40NR 115 60Hz LBP 3.77 103-127 S ISO32 95 0.85 EM 40NR 220 60Hz LBP 3.77 198-242 S ISO32 95 0.85 EMI 55ER 220-240 50-60Hz LBP 4.60 198-242 S/F ISO32 129 1.03 EM 55NR 115 60Hz LBP 4.99 103-135 S ISO32 132 0.93 EM 55NR 220 60Hz LBP 4.99 198-242 S ISO32 132 0.93 EM 65NR 115 60Hz LBP 5.54 103-132 S ISO32 143 0.96 EM 65NR 220 60Hz LBP 5.54 198-242 S ISO32 143 0.93 FF 6BK 115 60Hz L/M/HBP 6.23 103-135 S ISO32 902 1.60 FF 6BK 220 60Hz L/M/HBP 6.23 198-242 S ISO32 902 1.60 FF 7.5BK 115-127 60Hz L/M/HBP 6.92 103-140 S ISO32 902 1.60 FF 7.5BK 220 60Hz L/M/HBP 6.92 198-242 S ISO32 902 1.60 EG 70LR 115 60Hz LBP 5.96 103-140 S ISO32 167 1.00 EG 70LR 220 60Hz LBP 5.96 187-242 S ISO32 167 1.00 FFU 70AK 115-127 60Hz L/MBP 6.36 98-140 S/F ISO32 189 1.15 FFU 70AK 220-240 50-60Hz L/MBP 6.36 187-242 S/F ISO32 189 1.15 FF 8.5BK 115 60Hz L/M/HBP 7.95 103-135 S/F ISO32 695 1.64 FF 8.5BK 220 60Hz L/M/HBP 7.95 198-242 S/F ISO32 695 1.71 FFU 100AK 220 50-60Hz L/MBP 7.95 198-242 S/F ISO32 194 1.02 FFU 80AK 115-127 60Hz L/MBP 6.76 98-140 S/F ISO32 206 1.15 FFU 80AK 220-240 50-60Hz L/MBP 6.76 187-242 S/F ISO32 206 1.15 FF 10BK 115 60Hz L/M/HBP 9.04 103-135 S/F ISO32 732 1.56 FF 10BK 220 60Hz L/M/HBP 9.04 198-242 S/F ISO32 732 1.56 FFU 100AK 115-127 60Hz L/MBP 7.95 103-140 S/F ISO32 237 1.11 FFU 100AK 220 50-60Hz L/MBP 7.95 198-242 S/F ISO32 237 1.11 FF 11.5BK 115-127 60Hz L/M/HBP 11.14 103-140 F ISO32 902 1.59 FF 11.5BK 220 60Hz L/M/HBP 11.14 198-242 S/F ISO32 902 1.60 FFI 12BX 220 60Hz L/M/HBP 11.14 198-242 S/F ISO32 1092 1.80 FFI 12BK 115 60Hz L/M/HBP 11.14 103-127 F ISO32 1038 1.68 FFI 12BX 115 60Hz L/M/HBP 11.14 103-135 F ISO32 1128 2.01 FFU 130AX 220 60Hz L/MBP 10.61 198-242 S/F ISO32 305 1.02 FFU 130AX 115-127 60Hz L/MBP 10.61 98-140 F ISO32 317 1.11 / Blends - M/HBP - 60Hz OLTAGE OIL ISCOSITY EM 20BR 115 60Hz L/M/HBP 2.27 98-135 S/F ISO32 208 1.89 EM 20BR 220 60Hz L/M/HBP 2.27 187-242 S/F ISO32 208 1.89 FF 6BK 115 60Hz L/M/HBP 6.23 103-135 S ISO32 902 1.60 FF 6BK 220 60Hz L/M/HBP 6.23 198-242 S ISO32 902 1.60 / 10
Blends - M/HBP - 60Hz OLTAGE OIL ISCOSITY FF 7.5BK 115-127 60Hz L/M/HBP 6.92 103-140 S ISO32 902 1.60 FF 7.5BK 220 60Hz L/M/HBP 6.92 198-242 S ISO32 902 1.60 FF 8.5BK 115 60Hz L/M/HBP 7.95 103-135 S/F ISO32 695 1.64 FF 8.5BK 220 60Hz L/M/HBP 7.95 198-242 S/F ISO32 695 1.71 FF 10BK 115 60Hz L/M/HBP 9.04 103-135 S/F ISO32 732 1.56 FF 10BK 220 60Hz L/M/HBP 9.04 198-242 S/F ISO32 732 1.56 FF 11.5BK 115-127 60Hz L/M/HBP 11.14 103-140 F ISO32 902 1.59 FF 11.5BK 220 60Hz L/M/HBP 11.14 198-242 S/F ISO32 902 1.60 FFI 12BK 115 60Hz L/M/HBP 11.14 103-127 F ISO32 1038 1.68 FFI 12BX 220 60Hz L/M/HBP 11.14 198-242 S/F ISO32 1092 1.80 FFI 12BX 115 60Hz L/M/HBP 11.14 103-135 F ISO32 1128 2.01 / R-290 - L/MBP - 60Hz OLTAGE OIL ISCOSITY EMI 90UEX 115-127 60Hz L/MBP 4.99 98-140 F ISO32 205 1.08 FFU 130UAX 220-240 50-60Hz L/MBP 6.76 187-255 F ISO32 295 1.22 FFU 160UAX 115-127 60Hz L/MBP 7.95 98-140 F ISO32 362 1.22 / R-134a - L/MBP - 50Hz OLTAGE OIL ISCOSITY EM 20HHR 220-240 50-60Hz L/M/HBP 2.27 187-255 S/F ISO22 221 2.00 EMI 28HER 220-240 50-60Hz LBP 3.00 198-255 S ISO10 53 0.89 EMI 30HER 220-240 50-60Hz LBP 3.00 187-242 S ISO10 53 0.89 EM 30HHR 220-240 50-60Hz L/M/HBP 3.00 187-255 S/F ISO22 301 1.98 EMU 30HER 220-240 50-60Hz LBP 3.00 187-255 S ISO10 60 0.98 EMI 40HNR 220 50-60Hz LBP 3.77 187-255 S ISO10 66 0.86 EM 45HNR 220 50-60Hz LBP 3.77 187-242 S ISO10 72 0.80 EMI 45HER 220-240 50-60Hz LBP 3.77 187-255 S ISO10 74 0.96 EM 45HHR 220-240 50Hz L/M/HBP 3.77 198-255 S ISO22 75 0.81 EMU 45HEP 100 50-60Hz LBP 3.77 85-110 S ISO10 76 0.97 EMU 45HER 220-240 50-60Hz LBP 3.77 187-255 S ISO10 79 1.02 EMY 45HSC 220-240 50Hz LBP 3.77 198-255 S ISO10 81 1.22 EMU 45HSC 220-240 50-60Hz LBP 3.77 187-255 S ISO10 81 1.11 EM 55HNR 220 50-60Hz LBP 4.60 187-242 S ISO22 91 0.85 EMI 55HER 220 50-60Hz LBP 4.60 198-255 S/F ISO22 91 0.97 EM 50HNP 220-240 50Hz LBP 4.99 187-255 S ISO22 92 0.93 / 12
R-134a - L/MBP - 50Hz OLTAGE OIL ISCOSITY EMI 60HER 220 50-60Hz LBP 4.99 187-242 S ISO22 102 0.90 EM 60HNP 220-240 50Hz LBP 5.54 198-255 S ISO22 105 0.95 EMU 60HEP 100 50-60Hz LBP 4.99 85-110 S ISO10 105 0.98 EMY 60HSC 220-240 50Hz LBP 4.99 198-255 S ISO10 107 1.24 EM 65HNR 220 50Hz LBP 5.54 187-242 S ISO22 112 0.92 EGAS 70HLR 220-240 50-60Hz LBP 5.56 198-255 S ISO10 121 1.16 EGZS 70HLC 220-240 50-60Hz LBP 5.56 198-255 S ISO7 121 1.38 FG 65HAK 220-240 50Hz LBP 6.76 198-255 S/F ISO22 121 0.92 EMI 70HER 220 50Hz LBP 5.89 187-242 S/F ISO22 123 0.93 FF 6HAK 220 50-60Hz LBP 6.23 187-255 S ISO10 124 1.08 FFI 6HAK 220 50-60Hz L/MBP 6.23 187-242 S ISO22 126 0.91 FGS 70HA 220-240 50-60Hz LBP 6.36 198-255 S ISO10 130 1.19 FFU 70HAK 220-240 50-60Hz L/MBP 6.36 187-255 S/F ISO10 137 1.13 EMY 65HLC 220-240 50Hz LBP 5.96 187-255 S ISO10 137 1.26 FFI 7.5HAK 220-240 50-60Hz L/MBP 6.76 187-255 S ISO22 141 1.00 FF 7.5HAK 220-240 50-60Hz L/MBP 6.76 187-255 S ISO10 141 1.11 EG 70HLR 220-240 50Hz LBP 6.76 170-255 S ISO22 142 1.10 FG 75HAK 220-240 50Hz LBP 7.95 198-255 S/F ISO22 143 0.92 FF 8.5HBK 220-240 50Hz L/M/HBP 7.95 187-255 S/F ISO22 681 1.77 EGAS 80HLR 220-240 50-60Hz LBP 6.36 198-255 S ISO10 144 1.20 EGZS 80HLC 220-240 50-60Hz LBP 6.36 198-255 S ISO10 144 1.38 FGU 80HA 220-240 50-60Hz LBP 6.76 187-255 S ISO10 147 1.22 FFU 80HAK 220-240 50-60Hz L/MBP 6.76 187-255 S/F ISO10 147 1.11 FGS 80HA 220-240 50-60Hz LBP 7.15 198-255 S ISO10 151 1.22 EG 80HLR 220-240 50Hz LBP 7.15 170-255 S ISO22 152 1.09 FFI 8.5HAK 220-240 50-60Hz L/MBP 7.15 187-255 S/F ISO10 152 1.07 FF 8.5HAK 220-240 50-60Hz L/MBP 7.15 187-255 S ISO10 152 1.09 EGYS 90HLP 220-240 50Hz LBP 7.15 198-255 S ISO10 167 1.32 EGZS 90HLC 220-240 50-60Hz LBP 7.15 198-255 S ISO10 167 1.38 FG 85HAK 220-240 50Hz LBP 9.04 198-255 S/F ISO22 168 0.95 FGS 90HA 220-240 50-60Hz LBP 7.95 198-255 S ISO10 173 1.22 FFU 100HAK 220-240 50-60Hz L/MBP 7.95 198-255 S ISO10 177 1.06 FGS 100HA 220-240 50-60Hz LBP 9.04 198-255 S ISO22 184 1.11 FFI 10HAK 220-230 50-60Hz L/MBP 9.04 187-244 S ISO22 184 1.03 EGAS 100HLR 220-240 50-60Hz LBP 7.95 198-255 S ISO10 186 1.20 EGYS 100HLP 220-240 50Hz LBP 7.95 198-255 S ISO10 186 1.32 EGZS 100HLC 220-240 50-60Hz LBP 7.95 198-255 S ISO10 186 1.37 EG 100HLR 220-240 50Hz LBP 9.04 170-255 S ISO22 191 1.11 FG 95HAK 220-240 50Hz LBP 10.61 198-255 S/F ISO22 191 0.95 FFU 130HAX 220-240 50Hz L/MBP 10.61 187-255 F ISO10 229 1.09 FGS 130HA 220-240 50Hz LBP 11.14 198-255 S ISO22 235 1.18 FFI 12HBK 220-240 50Hz L/M/HBP 11.14 198-255 F ISO22 974 2.06 / 14
R-134a - M/HBP - 50Hz OLTAGE OIL ISCOSITY EM 20HHR 220-240 50-60Hz L/M/HBP 2.27 187-255 S/F ISO22 221 2.00 EM 30HHR 220-240 50-60Hz L/M/HBP 3.00 187-255 S/F ISO22 301 1.98 EM 45HHR 220-240 50Hz L/M/HBP 3.77 198-255 S/F ISO22 75 0.81 EMT 45HDR 220-240 50Hz L/M/HBP 3.97 187-255 F ISO10 354 2.24 EM 55HHR 220-240 50-60Hz HBP 4.60 198-255 F ISO22 394 2.13 EM 65HHR 220-240 50Hz HBP 5.54 198-255 F ISO22 473 2.06 EM 65HHR 220 50-60Hz M/HBP 5.54 187-242 F ISO22 477 1.89 FF 8.5HBK 220-240 50Hz L/M/HBP 7.95 187-255 S/F ISO22 681 1.77 FFI 12HBX 220-240 50Hz M/HBP 11.14 198-255 F ISO22 939 2.01 FFI 12HBK 220-240 50Hz L/M/HBP 11.14 198-255 F ISO22 974 2.06 / R-600a - L/MBP - 50Hz OLTAGE OIL ISCOSITY EMT 17CLP 220-240 50Hz LBP 3.40 187-255 S ISO7 38 0.97 EMX 20CLC 220-240 50Hz LBP 3.97 198-254 S ISO5 46 1.24 EMY 20CLC 220-240 50Hz LBP 3.97 198-254 S ISO5 46 1.15 EMZ 20CLC 220-240 50Hz LBP 3.97 187-255 S ISO5 50 1.30 EMT 23CLP 220-240 50Hz LBP 4.50 187-255 S ISO7 58 1.08 EMT 35CLP 100 50-60Hz LBP 4.50 85-110 S ISO7 60 1.03 EMY 26CLC 220-240 50Hz LBP 5.19 198-254 S ISO5 62 1.22 EMZ 26CLC 220-240 50Hz LBP 5.19 198-254 S ISO5 62 1.26 EMX 26CLC 220-240 50Hz LBP 5.19 187-255 S ISO5 63 1.34 EMT 26CLP 220-240 50Hz L/MBP 5.19 187-255 S ISO7 64 0.98 EMU 26CLC 220-240 50Hz L/MBP 5.19 198-254 S ISO7 64 1.07 EMT 32CLP 220-240 50Hz L/MBP 5.96 198-254 S ISO7 73 1.00 EMU 32CLC 220-240 50Hz L/MBP 5.96 198-254 S ISO7 73 1.08 EMY 32CLC 220-240 50Hz LBP 5.96 198-254 S ISO5 73 1.19 EMZ 32CLC 220-240 50Hz LBP 5.96 198-254 S ISO5 73 1.29 EMX 32CLC 220-240 50Hz LBP 5.96 187-255 S ISO5 74 1.36 EMU 45CLP 100 50-60Hz LBP 5.96 85-110 S ISO10 76 1.07 EMY 40CLC 220-240 50Hz LBP 7.23 198-254 S ISO5 89 1.21 EMZ 40CLC 220-240 50Hz LBP 7.23 198-254 S ISO5 91 1.30 EMT 40CLP 220-240 50Hz L/MBP 7.23 198-254 S ISO7 91 1.01 EMU 40CLC 220-240 50Hz L/MBP 7.23 198-254 S ISO7 91 1.10 EMY 46CLP 220-240 50Hz L/MBP 7.96 198-254 S ISO7 101 1.15 EMT 46CLP 220-240 50Hz L/MBP 7.96 198-254 S ISO7 102 1.02 EMU 46CLC 220-240 50Hz L/MBP 7.96 198-254 S ISO7 102 1.10 EMZ 46CLC 220-240 50Hz LBP 7.96 187-255 S ISO7 106 1.36 EMY 46CLC 220-240 50Hz LBP 7.96 187-255 S ISO7 106 1.27 EMT 56CLP 220-240 50Hz LBP 9.34 198-254 S ISO7 116 1.06 EMZ 55CLC 220-240 50Hz LBP 9.04 198-254 S ISO5 117 1.31 / 16
R-600a - L/MBP - 50Hz OLTAGE OIL ISCOSITY EMX 55CLC 220-240 50Hz LBP 9.04 187-255 S ISO5 118 1.37 EMX 66CLC 220-240 50Hz LBP 10.61 187-255 S ISO5 137 1.37 EMX 70CLC 220-240 50Hz LBP 11.14 198-255 S ISO5 143 1.36 EGX 80CLC 220-240 50Hz LBP 11.14 198-255 S ISO5 149 1.47 EMZ 70CLC 220-240 50Hz LBP 11.14 187-255 S ISO7 153 1.36 EGX 90CLC 220-240 50Hz LBP 12.21 198-255 S ISO5 162 1.49 EGZ 90CLC 220-240 50Hz LBP 12.21 198-255 S ISO7 167 1.40 / Blends - L/MBP - 50Hz OLTAGE OIL ISCOSITY EM 30NP 220-240 50Hz LBP 3.00 198-255 S ISO32 55 0.73 EMI 55ER 220-240 50-60Hz LBP 4.60 198-255 S/F ISO32 104 0.99 EM 55NP 220-240 50Hz LBP 4.99 198-255 S ISO32 106 0.86 EM 65NP 220-240 50Hz LBP 5.54 198-255 S ISO32 123 0.90 FF 7.5BK 220-240 50Hz L/M/HBP 6.92 198-255 S ISO32 902 1.60 FFU 70AK 220-240 50-60Hz L/MBP 6.36 187-255 S/F ISO32 158 1.11 FF 8.5BK 220-240 50Hz L/M/HBP 7.95 198-255 S/F ISO32 695 1.71 FFU 80AK 220-240 50-60Hz L/MBP 6.76 187-255 S/F ISO32 169 1.10 FF 10BK 220-240 50Hz L/M/HBP 9.04 198-255 F ISO32 632 1.70 FFI 12BK 220-240 50Hz L/M/HBP 11.14 198-255 F ISO32 902 1.77 / Blends - M/HBP - 50Hz OLTAGE OIL ISCOSITY FF 7.5BK 220-240 50Hz L/M/HBP 6.92 198-255 S ISO32 902 1.60 FF 8.5BK 220-240 50Hz L/M/HBP 7.95 198-255 S/F ISO32 695 1.71 FF 10BK 220-240 50Hz L/M/HBP 9.04 198-255 F ISO32 632 1.70 FFI 12BK 220-240 50Hz L/M/HBP 11.14 198-255 F ISO32 902 1.77 / R-290 - L/MBP - 50Hz OLTAGE OIL ISCOSITY FFU 130UAX 220-240 50-60Hz L/MBP 6.76 187-255 F ISO32 236 1.18 FFU 160UAX 220-240 50Hz L/MBP 7.95 187-255 F ISO32 296 1.15 / 18
R-600a - R-134a - Blends - R-290 10) - COMPRESSOR HOUSING EM EG / F Suction Connector 179 (7.05) Process Connector Process Connector 203.8 (8.02) Suction Connector 30º 30º Discharge Connector D 30º C 78 (3.07) B A E D C 34 (1.34) B A Earthing Terminal Discharge Connector Earthing Terminal Oilcooler Tube 106.5 (4.19) 96.5 (3.80) 150 (5.91) 32 (1.26) 24º 28º 35 41 (1.38) (1.61) 173 (6.81) 63 (2.36) 40º 27º 44º 42.7 (1.68) 70 (2.76) 98 (3.86) 93 (3.66) 110 (4.33) 104 (4.09) 92.5 (3.64) 113 (4.45) Ø 3.75 (0.148) 203 (7.99) 170 (6.69) Ø 19 (0.45) (x4) Ø 16 (0.75) (x6) Ø 3.75 (0.148) 203 (7.99) 170 (6.69) Ø 7 (0.276) (x2) Ø 19 (0.75) (x4) Ø 16 (0.63) (x6) 101.6 70 (4.00) (2.76) 131.5 (5.18) 101.6 (4.00) 70 (2.76) 131.5 (5.18) 165 (6.50) 178 (7.01) Ø 7 (0.276) (x2) 165 (6.50) 178 (7.01) 203 (7.99) Ø 16 (0.63) (x6) 106.5 (4.19) 203 (7.99) 96.5 (3.80) Ø 16 (0.63) (x6) 70 (2.76) 100 (3.94) 70 (2.76) 100 (3.94) 170 (6.69) 178 (7.01) Ø 7 (0.276) (x2) 170 (6.69) 178 (7.01) Dimensions in mm (inches) Dimensions in mm (inches) EM (tall) EM (short) COMPRESSORS A B C D COMPRESSORS A B C D 168 (6.61) 157 (6.18) 166 (6.54) 155 (6.10) 150 (5.91) 139 (5.47) 155 (6.10) 144 (5.67) EG / F (tall) EG / F (short) 109 (4.29) 103 (4.06) 90 (3.54) 84 (3.31) 118 (4.65) 112 (4.41) 201 (7.91) 195 (7.68) E 207 (8.15) 201 (7.91) Compressors may be supplied with either of the above plates. Please make sure you indicate which base should be supplied. 20
R-600a - R-134a - Blends - R-290 11) - ELECTRICAL DIAGRAMS EM COMPRESSORS - CSCR / CSIR / RSCR / RSIR F / EG COMPRESSORS - CSCR / CSIR / RSCR / RSIR Overload Protector 3 1 4 1 Start Capacitor Compressor 1 2 2 5 6 3 3 Run Capacitor 3 C M S PTC 3 4 PTC S M C 4 Run Capacitor 3 3 6 5 2 2 1 Compressor Start Capacitor 1 4 1 3 Overload Protector Compressors with a run capacitor must use PTC with 3 terminals. Compressors without run capacitor use PTC with 1 terminal. EM COMPRESSORS - CSIR / RSIR F / EG / P COMPRESSORS - CSIR / RSIR Overload Protector 3 Compressor 1 2 10 12 13 11 11 13 Starting Relay C M S Start Capacitor Start Capacitor S M C Starting Relay 3 1 14 Compressor 3 4 2 2 1 4 3 Overload Protector If application of a start capacitor is necessary, then it must be connected between terminals 3 and 4. To achieve this, just rupture this bridge. If application of a start capacitor is necessary, then it must be connected between terminals 11 and 13. This requires a specific relay, with fast on terminals for better start capacitor installation, which can be supplied upon request. 22
R-600a - R-134a - Blends - R-290 12) - F COMPRESSOR DENOMINATION Basic type F - Relay / External Protector Relay / External Protector / Start Capacitor (optional) Electrical system - Standard efficiency C - Improved efficiency 1 st generation (for commercial refrigeration) E - Improved efficiency 1 st generation I - Improved efficiency 2 nd generation - Improved efficiency 3 rd generation U - Improved efficiency 4 th generation Efficiency level F U Approx. compressor displacement in cm 3 (for FG, FFU and FFC compressors approximate capacity in Btu/h - 60Hz - ASHRAE - check point divided by 10) Refrigerant Application Starting characteristic Compressor cooling F 60 H A G S - ithout oil cooler - ith oil cooler H - R-134a C - R-600a U - R-290 G - R-404A - Blends A - LBP B - HBP, LBP/HD H - HBP - LST (low starting torque) K - LST (low starting torque) X - HST (high starting torque) - Standard efficiency S - Improved efficiency 1 st generation - Improved efficiency 2 nd generation T - Improved efficiency 3 rd generation U - Improved efficiency 4 th generation Efficiency level G - PTC / External Protector PTC / External Protector / Start Cap / Run Cap (optional) Electrical system 24
R-600a - R-134a - Blends - R-290 14) - EG COMPRESSOR DENOMINATION Basic type Efficiency level Mechanical Kit (Embraco Internal Use) Capacity/10 - Btu/h (ASHRAE - check point - 60Hz) Refrigerant Application Electrical equipment Oil cooler EG Z S 100 H L P - ithout oil cooler - ith oil cooler L - LBP M - L/M/HBP H - HBP R - Relay P - PTC + Run Capacitor (optional) C - PTC + Run Capacitor (mandatory) X - Relay + Start Capacitor - Blends H - R-134a C - R-600a S - Standard Mechanical Kit S T U Y Z X or A - Standard - 1 st Generation - 2 nd Generation - 3 rd Generation - 4 th Generation - 5 th Generation - 6 th Generation 26
27
28