Radiator valve accessories 1-25-5

TOUR & ANDERSSON HYDRONICS AB Certification of Registration Number 2125 and 2125 M Certified by SP QUALITY AND ENVIRONMENT SYSTEM Radiator valve accessories 1-25-5 2001.04 1 Contents Accessories Presetting tools Servicing tools Radiator connections Other connections FPL, FPL-PX, KOMBI - see each catalogue leaflet Adapter DN 8 Insert pipes Accessories for thermostats (M28) Adapters (M28) Accessories for thermostats (M30) Adapters (M30) Spares Top sections for RVO Handwheels for manual valves Packing boxes Plugs, valve disc Thermostat top sections a subsidiary of IMI plc

Presetting tools Presetting tool TRV 400 RVT 40 F For valve Colour 50 500-003 TRV 400 M30x1,5 Grey 50 400-003 TRV 400 M28x1,5 Red 50 369-007 RVT 40 F M28x1,5 Red 50 369-008 RVT 40 L M28x1,5 Blue 50 369-010 RVT-F 3/8 M28x1,5 White 50 369-015 RVT-F 1/2 M28x1,5 Grey RVT-F Adjustment template For valve 302 428-03 RVO 302 896-01 TRIM A/RADITRIM A Regulating key for RVO and STK Metal Plastic For valve Material 52 187-001 RVO-Ä, STK-Ä, ST Metal 52 187-003 RVO, STK Plastic Loop adjustment tool (Applicable for valves manufactured up to 1997) 52 187-003 must be used if the valve spindle top is made of plastic. For valve Kv Colour 50 579-005* Radiett-S 0,20-2,2 Grey 50 579-001* Radifix/Radiflex 0,2-1,8 Red 50 579-002** Radifix 0,1-0,6 White *) 1-pipe **) 2-pipe Valves 50 680, 50 681 and 50 682 can be set to different Kv while retaining the same flow percentage if the loop adjustment tool is used. Kv-values on the tool apply to 50% to the radiator. 1-25-5-2

Servicing tools Servicing tool TRV 400 When changing of insert Connection thread to thermostat 50 500-005 M30x1,5 50 400-005 M28x1,5 1 Servicing tool TRV 400 When changing of complete packing box during operation 50 500-004 50 400-004 Connection thread to thermostat 50 500-004 M30x1,5 50 400-004 M28x1,5 Exchange insert TRV 400 Complete Connection thread to thermostat 50 500-007 M30x1,5 50 400-007 M28x1,5 Radiator connections Straight sleeve with nuts (Taper connection) For heating and tap water installations DN L L1 d Da 50 701-510 10 25 8 R3/8 M22x1,5 50 701-515 15 30 10 R1/2 M26x1,5 50 701-516 15 25 10 R1/2 M22x1,5 50 701-520 20 34 11 R3/4 M34x1,5 50 701-525 25 38 13 R1 M40x1,5 With Dri-Seal thread seal DN L L1 d Da 50 707-510 10 25 8 R3/8 M26x1,5 50 707-515 15 30 10 R1/2 M26x1,5 50 707-516 15 25 10 R1/2 M22x1,5 Elbow with nut (Taper connection) DN L L1 d Da H 50 702-110 10 44 8 R3/8 M22x1,5 48 50 702-115 15 46 10 R1/2 M26x1,5 56 50 702-120 20 51 11 R3/4 M34x1,5 65 1-25-5-3

Radiator connection Long (Taper connection) DN L L1 d Da 50 701-815 15 65 45 R1/2 M26x1,5 Elbow For manifold assemblies (Taper connection) DN L d Da H 50 702-510 10 27 M22x1,5 M22x1,5 26,5 Radiator connection (Taper connection) Threaded d For valve 50 720-115 R1/2 RADIETT-U Welded For valve 50 722-015 RADIETT-U Radiator connection excl. insert pipe (Gasket) d For valve 50 721-115* R1/2 RADIETT-S 50 721-120 R3/4 RADIETT-S *) Included in complete valve 50 680/50 684 Radiator connection excl. insert pipe (For gasket) d For valve 50 721-915 R1/2 RENOVETT ARCU 50 721-920 R3/4 RENOVETT ARCU 1-25-5-4

Other connections Rotating base connection with flexible connection angle Swivelling nut (Taper connection) 50 724-001 1 90 connection Swivelling nut (Taper connection) D L 50 484-110 G3/8* 22 50 484-115 G1/2* 25 *) Prepared for KOMBI 90 connection Ø D L H 74 214-001 16 G1/2* 25,5 200 *) Prepared for KOMBI 90 connection Swivelling nut d L 53 763-001 M22x1,5 23 h-piece for use in underfloor solderless installations of pipes and connection to connection Swivelling nut (Taper connection) d L H Kvs 50 710-501 M22x1,5 40 55 3 Example of the solderless underfloor pipe installation with h-piece 1 = Next radiator 2 = Mains 1 2 1-25-5-5

Adapter nipple d Pipe Ø 50 718-412 G3/8 12 mm 50 718-416 M22x1,5 16 mm Adapter nipple incl seal Da L 50 718-110 G3/8 13 Adapter connection Swivelling nut (Taper connection) D L 50 723-110 G3/8 36 50 723-115 G1/2 39 50 723-120 G3/4 41 50 723-122 M22x1,5** 39 50 723-126 M26x1,5** 36 **) Taper connection Adapter connection Swivelling nut (Taper connection) d Da L 50 723-118 M18x1,5 M22x1,5 32 Adapter DN 8 Adapter When changing from old RVO DN 8 to new RVT/RVO DN 10 DN Da 50 717-108 8 M22x1,5 1-25-5-6

Insert pipes For RADIETT-S Plastic Insert length 300 830-01 95 mm 1 Extension pipe for 300 830-01 Plastic Extension 50 539-001 105 mm Plastic/metal pipe Insert length L 300 830-60 100 mm 125 300 830-61 170 mm 195 300 830-62 230 mm 255 For RADIETT-U Plastic Insert length 302 452-01 35 mm Plastic/metal pipe Insert length 303 404-62 105 mm For RENOVETT ARCU 302 689-60 302 690-60 Plastic Insert length 302 689-60 95 mm 302 690-60 95 mm 1-25-5-7

Accessories for thermostats M28x1,5 For thermostatic head TERMORETT TRV 310, TRV 320, with connection M28x1,5. Handwheel For fitting on valve with thermostat insert Colour 50 399-001 White Key regulator For fitting on valve with thermostat insert 4 mm allen key 50 399-005 Protective cap For valve 50 300-003 TRV 400/RVT Locking ring 50 300-006 Restriction pin tool 50 300-002 Restriction pin 50 300-001 Standard 50 300-004 Hidden 1-25-5-8

Adapters M28x1,5 Connection M28x1,5 to thermostatic head Suitable for the adapters, replacement thermostatic head TERMORETT TRV 300 ( 50 310-028) only. See catalogue leaflet TERMORETT TRV 300. For valve 50 347-520 Danfoss RA 2000 50 347-521 Danfoss RAVL (Ø26) 50 347-522 Danfoss RAV (Ø34) 50 347-530 Heimeier, MNG 50 347-540 Oventrop 50 347-550 Markaryd 50 347-560 Hertz, Comap 1 Accessories for thermostats M30x1,5 For thermostatic head TERMORETT TRV 300, with connection M30x1,5. Handwheel For fitting on valve with thermostat insert 50 399-003 Setting key For thermostatic head, protective model 50 370-001 Adapter M28 - M30 50 357-530 1-25-5-9

Restriction pin For thermostatic head with integral/remote sensor 50 340-001 Pocket tube for remote sensor For thermostatic head 50 364-201/-202 50 364-200 Heat transfer cradle for remote sensor For thermostatic head 50 364-201/-202 50 364-203 Locking ring For thermostatic head with integral/remote sensor 50 350-006 Key regulator 4 mm allen key 50 399-006 1-25-5-10

Adapters M30x1,5 Connection M30x1,5 to thermostatic head/actuator Thermostatic head TERMORETT TRV 300 and actuator TSE 150, see each catalogue leaflet. For valve 50 357-520 Danfoss RA 2000 50 357-521 Danfoss RAVL (Ø26) 50 357-522 Danfoss RAV (Ø34) 50 357-550 Markaryd 50 357-560 Hertz 50 357-570 Comap 1 Top sections for RVO Complete top section RVO-F incl. handwheel for RVO-A and m72-a valve housing Top section in steel DN 50 121-010 10 50 121-015 15 Complete top section RVO incl. handwheel for RVO DN (1980 - ) valve housing DN 50 123-010 10 Complete top section RVO-F incl. handwheel for RVO-HE Made completely of AMETAL DN 50 122-410 10 1-25-5-11

Handwheels for manual valves All handwheels include handwheel screw For valve M72Ä Splines 50 199-002 18 For valve M72, S74 Splines 50 199-003 24 For valve RVO-Ä,RVE-S Cone on spindle Colour 50 199-004 Grey For valve RVO-A Splines on spindle Splines Colour 50 199-005 24 Grey For valve RVO from -80 Splines Colour 50 199-006 24 White 1-25-5-12

Packing boxes For valve RVT -008-009 50 040-008 RVT -1984 50 040-009 RVT 1985-1 For valve TRV 400 (M28) 50 400-006 Packing boxes: O-ring + support washer for valve RVO Qty/package 75 168-003 10 O-ring for packing box sealing TRV 400 (M30) Qty/package 50 500-006 10 1-25-5-13

Plugs, valve disc Plug for RVO/HE radiators To be used when changing the valves in these radiators 50 198-000 Plug Application: Pressure testing connection pipes 53 766-016 RADIETT/RENOVETT Plug for use when changing from 1- to 2-pipe system for bottom entry valves 2-pipe version 50 670-008 Yellow 1-pipe version 50 670-009 Nickel-plated Presetting valve disc for RENOVETT S74 50 699-200 1-25-5-14

Thermostat top sections Technical description Application: When changing from manually-operated to thermostaticallycontrolled valves, there are thermostat top sections (inserts) for use in standard valve housings as below. The top sections are suitable for TA Hydronics thermostat parts. Material: / - normal heating installations. /Nitrile - heating installations where there are problems with oil in the circulation water. AMETAL / - tap water installations. 1 L = Seat depth Thermostat thread on the top section Designed for valves series d L RVO-A/m72-A DN 10-20 (after 1973) S-74, RADIETT-U, RENOVETT-U AGA- TP/Thermal Perfect RADIFIX/RADIFLEX RVT RVT-F/RVT-F 2 S reversed angle RVT-F/RVT-F 2 S straight (to week 20 1984) Thermostat thread on valve housing M16x1 M16x1 M16x1 M16x1 M16x1 M16x1 M16x1 (M28x1,5) 50 343-001 50 343-001 50 343-001 50 343-001 50 343-001 50 343-001 50 343-001 (M30x1,5) 50 543-001 50 543-001 50 543-001 50 543-001 50 543-001 50 543-001 50 543-001 Material Top section Valve disc RADIETT-S, RENOVETT-S M20x1 50 343-003 50 543-003 RVO /RVO-HE DN 10**) (before 1973) W19x19*) 27 50 343-005 50 543-005 RVO DN 15 (before 1973) W19x19*) 30 50 343-006 50 543-006 Designed for valve series d L (M28x1,5) Material Top section Valve disc RVE,RVE-S M18x1.5 26,5 50 343-002 RVT-F/RVT-F 2 S straight (to week 20 1984) M16X1 M16X1 50 343-004 50 343-504 Nitril RVT 40 F DN 10, RVT 40 L DN 10-20 - - - - 50 343-015 50 343-515 Nitril RVT 40 F DN 15-20 - - - - 50 343-016 50 343-516 Nitril *) Threads/inch **) Caution! When replacing HE radiators there is a risk that the pipe loop can be twisted and damaged if the valve is not fixed in position. TA Hydronics retains the right to make changes to its products and specifications without prior notice. 1-25-5-15

1-25-5-16