TA-FUS1ON. Fully adjustable Kvs control and balancing valves. That s just two good.

Transcription

1 TA-FUS1ON Fully adjustable Kvs control and balancing valves. That s just two good.

2 Supported by the Reece hvac-r network. Through our 36 stores around Australia, Reece hvac-r is committed to supporting your business with dedicated stock and knowledgeable experts always on hand. TA Hydronics. Engineering Advantage. With experience across more than 100,000 projects worldwide, TA Hydronics is a leading global provider in hydronic distribution systems and room temperature control. Our innovative, high quality solutions are designed to give you a clear engineering advantage on all types of large scale builds. For more information visit

3 Join the Fusion revolution Traditionally, commissioning and maintaining design flow through balancing valves has always been difficult, time consuming work. That s why we developed the revolutionary TA-Fus1on valve. With its innovative design, it makes water balancing easier than ever before. The TA-Fus1on is the first closed circuit valve range in the world to combine control and balancing in a single unit with fully adjustable Kvs. This ensures perfect sizing and maximum performance. Advanced measurement and diagnostic capabilities make the TA-Fus1on much easier to commission. Over and under sizing of flows is a thing of the past, reducing potential problems on every job. By eliminating control valve hunting, your customers enjoy maximum energy savings. Achieve world-class indoor climate conditions from more precise heating and cooling control. Combining the two functions of balancing and control in one valve to save space and installation time. Easy venting and flushing of valve. Get the right valve for the job. TA-FUS1ON-P The FUS1ON-P is pressure independent. With adjustable Kv values, independent control characteristics and constant pressure differential the FUS1ON-P ensures correct valve sizing every time for independent management of different zones or equipment. TA-FUS1ON-C The FUS1ON-C offers adjustable Kv values and independent control characteristics to ensure correct valve sizing. TBV-CMP TBV-CMP is a pressure independent combined control and balancing valve available in sizes 15 to 25mm. TA-MC Actuators A range of compact, easy fit proportional actuators are available for TA-FUS1ON control valves, giving you even greater flexibility.

4 HOW IT WORKS TA-FUS1ON-C and TA-FUS1ON-P Standard features Achieving the specified Kv value is simpler then ever. Pre-set the valve by adjusting the handwheel to the required design value. Further adjustments can be made during commissioning or with system modifications. Measurements can be taken directly from the test points. Simple to attach actuators providing either on/off, modulating or 3 point control. TA-FUS1ON-P Only - Pressure independent control to ensure optimum system controllability. TA-FUS1ON-C DN 65 to DN 150 TA-FUS1ON-C DN 32 to DN 50 Accurate measurement of flow, differential pressure and temperature Accurate measurement of flow, differential Pressure and temperature Pressure balanced plug to enable use of low force actuators under all system conditions Pressure balanced plug technology In-line technology enabling precision control & low noise generation even at high flows Handwheel equipped with digital read-out TA-FUS1ON-C DN 65 to DN 150 Adjustable KVs thanks to motion translation of cam mechanism. Inherent equal percentage modified (EQM) characteristic independent to the adjustment. No restriction in series TA-FUS1ON-C DN 32 to DN 50 Adjustable KVs thanks to plug shape adaptation. Inherent equal percentage modified (EQM) characteristic independent to the adjustment. No restrictions in series

5 No other control valve offers the versatility and easy commissioning of the TA-FUS1ON range. Isolation Valve TA-FUS1ON TA-FUS1ON eliminates temperature fluctuations due to coils being starved of flow or oversizing / undersizing of control valves. It also ensures specified flow to equipment with the adjustable Kv value and pressure independent capability. TA-FUS1ON has a unique space saving actuator designed to suit the tight space requirements of modern building design. Plant Room * This drawing is for illustration purposes only In the past, equipment closest to the plantroom could receive too much flow to equipment wasting energy. TA- FUS1ON ensures accurate flow from top to bottom with the adjustable Kv value and pressure independent capabilty. Application Ideal for new builds and refurbishments, specify TA-FUS1ON where water is used to provide the cooling and heating in Air Conditioning systems. Typical applications include large multi-storey buildings, hospitals, facilities providing IT or telecommunication services, apartments, shopping centres, laboratories and entertainment spaces.

6 TA-FUS1ON-P The TA-FUS1ON-P is pressure independent and accurately controls and balances water flow for equipment such as cooling and heating coils while maintaining a constant pressure differential across your valve or branch line. The Kv value engineered at the design stage can be accurately achieved by setting the valve Kv pre-delivery, on site or during commissioning stage. TA-FUS1ON-P is designed for easy and quick commissioning. Flexible pre-setting with adjustable Kv values. Pressure Independent Control ensures optimum system controllability. Control valve function is maintained by the EQM (Equal Percentage Characteristics) feature, ensuring accurate flows on demand. Adjustable maximum flow and independent EQM characteristics of the valve match the characteristics of the cooling or heating equipment across the stroke of the valve, providing heat transfer proportional to the control signal. Better balancing of water flows. Easy measuring of flow differential, temperature and pressure. 24V AC/DC and 230V AC modulating, on/off or 3-point actuators available. Easy venting and flushing of valve.

7 page 2 of 3 TA TA FUS1ON-P PRESSURE INDEPENDENT CONTROL VALVES Pressure Independent combined control and balancing valves with independent EQM characteristics Pressure Independent combined control and balancing valves with independent EQM characteristics SELECTION CHART SELECTION CHART Size Size Size Pressure Actuator Pressure Pressure Rating Actuator Actuator Model Rating Rating Model Model Control Control Control Type Type Type Voltage Voltage Voltage Reece Reece Reece TA TA TA Differential Differential Differential Pressure Pressure Pressure Range Range Range Image Image DN32 DN32 DN32 DN40 DN40 DN40 DN50 DN50 DN50 DN65 DN65 DN65 DN80 DN80 DN80 DN100 DN100 DN100 DN125 DN125 DN125 DN150 DN150 DN150 24V AC/DC V 24V AC/DC AC/DC On / Off 230V AC V 230V AC AC Y Mod 24V AC/DC Y Y Mod Mod 24V 24V AC/DC AC/DC V AC/DC V 24V AC/DC AC/DC On / Off 230V AC V 230V AC AC Y Mod 24V AC/DC Y Y Mod Mod 24V 24V AC/DC AC/DC V AC/DC V 24V AC/DC AC/DC On / Off 230V AC V 230V AC AC Y Mod 24V AC/DC Y Y Mod Mod 24V 24V AC/DC AC/DC V AC/DC V 24V AC/DC AC/DC On / Off 230V AC V 230V AC AC Y Mod 24V AC/DC Y Y Mod Mod 24V 24V AC/DC AC/DC V AC/DC V 24V AC/DC AC/DC On / Off 230V AC V 230V AC AC Y Mod 24V AC/DC Y Y Mod Mod 24V 24V AC/DC AC/DC V AC/DC V 24V AC/DC AC/DC On / Off 230V AC V 230V AC AC Y Mod 24V AC/DC Y Y Mod Mod 24V 24V AC/DC AC/DC V AC/DC V 24V AC/DC AC/DC On / Off 230V AC V 230V AC AC Y Mod 24V AC/DC Y Y Mod Mod 24V 24V AC/DC AC/DC V AC/DC V AC/DC On / Off 24V AC/DC V AC V 230V AC AC V AC/DC V AC/DC On / Off 24V AC/DC & 230V AC Mod 230V 230V AC AC V AC/DC V AC/DC On / Off 24V AC/DC & 230V AC Mod 230V 230V AC AC V AC/DC V AC/DC On / Off 24V AC/DC & 230V AC Mod 230V 230V AC AC MC160 24V AC/DC MC160 24V AC/DC MC160 On / Off 24V AC/DC & 230V AC Mod 230V 230V AC AC MC160 24V AC/DC MC160 24V AC/DC MC160 On / Off 24V AC/DC & 230V AC Mod 230V 230V AC AC kpa kpa kpa kpa kpa kpa kpa kpa kpa kpa kpa kpa

8 TA-FUS1ON-C The TA-FUS1ON-C accurately controls and balances your water flow for equipment such as cooling and heating coils. The Kv value engineered at the design stage can be accurately achieved by setting the valve Kv pre-delivery, on site or during commissioning stage. TA-FUS1ON-C is designed for easy and quick commissioning. Flexible pre-setting with adjustable Kv values. Control valve function is maintained by the EQM (Equal Percentage Characteristics) feature ensuring accurate flows on demand. Independent EQM characteristics control the plug to match the characteristics of the cooling or heating equipment across the stroke of the valve, providing heat transfer proportional to the control signal. Better balancing of water flows. Easy measuring of flows, temperature and differential pressures. Simple to attach actuators providing either modulating on/off or 3-point control. Easy venting and flushing of valve.

9 TA FUS1ON-C CONTROL VALVES TA FUS1ON-C CONTROL VALVES Combined control and balancing valves with independent EQM characteristics page 1 of 3 page 1 of 3 Combined control and balancing valves with independent EQM characteristics Combined control and balancing valves with independent EQM characteristics SELECTION CHART SELECTION SELECTION CHART Size Pressure CHART Actuator Control Rating Model Type Size Size Pressure Actuator Control Size Rating Pressure Rating Model Actuator Model Type Control Type Rating Model Type Voltage Reece TA Image Voltage Reece Reece TA TA Image Image Voltage Reece TA Image 24V AC/DC V 24V AC/DC AC/DC DN32 On Off 230V 24V AC/DC DN32 DN32 230V 230V AC AC DN32 Y Mod 24V AC/DC 230V AC Y Y Mod Mod 24V 24V AC/DC AC/DC Y Mod 24V 24V AC/DC AC/DC V 24V AC/DC AC/DC On Off 24V AC/DC DN40 DN40 DN40 230V 230V AC AC V AC DN40 230V AC Y Y Y Mod Mod Mod 24V 24V 24V AC/DC AC/DC Y Mod 24V AC/DC V 24V 24V AC/DC AC/DC On Off 24V AC/DC DN50 DN50 DN50 230V 230V AC AC DN50 230V AC Y Y Y Mod Mod 24V 24V AC/DC Y Mod Mod 24V 24V AC/DC AC/DC V 24V 24V AC/DC On Off 24V AC/DC AC/DC V 230V AC AC V 230V AC AC Y Y Mod Mod 24V 24V AC/DC AC/DC DN65 DN65 Y Y Mod Mod 24V 24V AC/DC AC/DC DN65 DN65 24V 24V AC/DC AC/DC On Off 24V 24V AC/DC AC/DC V 230V AC AC V 230V AC AC Y Y Mod Mod 24V 24V AC/DC AC/DC Y Mod 24V AC/DC Y Mod 24V 24V AC/DC 24V AC/DC AC/DC On Off 24V AC/DC V 230V AC/DC 230V AC V AC Y Y Mod Mod 230V 24V 24V AC/DC AC/DC DN80 DN80 Y Mod 24V AC/DC DN80 Y Mod 24V 24V AC/DC AC/DC DN80 On Off 24V AC/DC V 230V AC V AC/DC 230V AC Y Y Mod Mod 24V 24V AC/DC AC/DC Y Mod 230V 24V AC/DC V AC/DC On Off 24V AC/DC Y Mod 24V & On Mod Mod / Off 24V AC/DC AC/DC V 230V AC AC DN100 DN V AC DN100 24V AC/DC V AC/DC On Off 24V AC/DC & On Mod Mod / Off 230V 24V AC AC/DC DN V 230V AC AC V AC V AC/DC V AC/DC On Off 24V AC/DC & On Mod Mod / Off 24V AC/DC V 230V AC 230V AC AC DN125 DN V AC DN125 24V On Off 24V AC/DC V AC/DC & On Mod Mod / Off 24V AC/DC V 230V AC AC DN V AC MC160 MC160 On Off 24V AC/DC V AC/DC MC160 & On Mod Mod / Off 24V AC/DC V 230V AC DN150 DN V AC AC DN150 MC160 24V MC160 On Off 24V AC/DC MC160 & On Mod Mod / Off 24V AC/DC MC160 24V AC/DC V 230V AC AC V 230V AC AC DN150 MC160 24V AC/DC V AC

10 TBV-CMP The TBV-CMP is pressure independent and accurately controls and balances your water flow for equipment such as cooling and heating coils while also maintaining a constant pressure differential across your control valve. The Kv value engineered at the design stage can be accurately achieved by setting the valve Kv on site. With the EQM control valve characteristics you are ensured your equipment receives accurate flows on demand. TBV-CMP is designed for easy and quick commissioning. Flexible pre-setting with adjustable Kv values. Pressure Independent EQM Control ensures optimum system controllability. Correct EQM control characteristic contributes to a linear circuit characteristic for accurate hydronic control. Better balancing of water flows. Easy measuring of flow, temperature and differential pressure. 24V AC (50-60 Hz) modulating control. Easy venting and flushing of valve.

11 tbv-cmp Pressure independent balancing & control valves Pressure independent balancing & control valves (PIBCV) SELECTION CHART Size Flow Flow Range (l/s) Control Type Reece TA Differential Pressure Range Image DN15 Low Flow Modulating Normal Flow Modulating DN20 Normal Flow Modulating kpa DN25 Normal Flow Modulating TBV-CMP PROPORTIONAL ACTUATORS High performance proportional actuators to suit TBV-CMP SELECTION CHART Size Range Model Number Control Type Cable length Open/ Closed Voltage Reece TA Image EMO TM Modulating 2m NC 24V AC NC 24V AC/DC EMO T On/Off 2m NO 24V AC/DC NC 230V AC DN15-25 NO 230V AC TA-MC15-C Modulating & On/Off 1.5m - 24V AC/DC

12 TA-MC ACTUATORS TA-MC ACTUATORS page page 3 of of 3 page 3 of 3 The perfect match for the perfect valve. High High High suitable for control valves. High performance performance performance proportional proportional proportional actuators actuators actuators suitable suitable suitable for for for TA-FUS1ON TA-FUS1ON combination Fully combination adjustable control control Kvs valves. valves. control valves. SELECTION CHART SELECTION CHART SELECTION CHART Size Range Size Size Range Range Size Range Model Model Number Model Number Number Model Number Control Control Type Control Control Type Type Type Voltage Voltage Voltage Voltage Reece Reece Reece Reece TA TA TA TA Image Image Image Image 24V 24V V V On Off DN32 DN32 - DN80 DN80 DN32 - DN80 230V 230V V V DN32 - DN80 Y Y Y Mod Mod Mod 24V 24V 24V Y Mod 24V V 24V 24V V DN100 DN100 DN100 - DN125 - DN125 DN125 DN100 - DN125 On / On Off Off On Mod / Off 230V 230V 230V V V 24V 24V V DN150 DN150 DN150 DN150 MC160 MC160 MC160 MC160 On Off On / On Off Mod / Off 230V 230V V 230V

13 Technical descriptions TA-FUS1ON-P Application: Heating and cooling systems. Functions: Control (EQM) Differential pressure control Pre-setting (max. flow) Measuring ( H, T, q) Shut-off (for isolation during system maintenance) Flushing Dimension: DN Pressure class: DN 32-50: PN 16 DN : PN 16 and PN 25 Differential pressure ( pv): Max. differential pressure: DN 32-50: 350 kpa = 3,5 bar DN : 400 kpa = 4 bar Min. differential pressure: DN 32-50: 15 kpa = 0,15 bar DN 65-80: 25 kpa = 0,25 bar DN : 30 kpa = 0,30 bar DN 150: 40 kpa = 0,40 bar (Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software TASelect.) Recommended flow range: The flow (qmax) can be set within the range [m3/h]: DN 32: 0,88-4,21 DN 40: 1,01-6,19 DN 50: 2,71-11,1 DN 65: 9,60-23,3 DN 80: 12,8-36,7 DN 100: 27,8-68,0 DN 125: 45,6-120 DN 150: 78,1-207 qmax = m3/h at each setting and fully open valve plug. Lift: 20 mm Rangeability: >100 (for all recommended settings) Leakage rate: Tight sealing Characteristics: Independent EQM. Temperature: Max. working temperature: 120 C Min. working temperature: -20 C Media: Water or neutral fluids, water-glycol mixtures. (For other media contact TA Hydronics.) Material: DN 32-50: Valve body: AMETAL Valve plug: AMETAL Seat seal: EPDM/Stainless steel Spindle seal: EPDM O-ring O-rings: EPDM Valve insert: AMETAL /PPS/PTFE p insert: Stainless steel/pps Membrane: HNBR Springs: Stainless steel Spindle: Stainless steel DN : Valve body: Ductile iron EN-GJS-400 O-rings: EPDM Valve plug: Stainless steel Seat seals: EPDM/Stainless steel Plug mechanisms: Stainless steel and brass Membrane: EPDM p spring: Stainless steel. DN 150 painted steel. Screws and nuts: Stainless steel AMETAL is the dezincification resistant alloy of TA. Marking: DN 32-50: TAH, IMI, DN, PN, DR, serial No and flow direction arrow. DN : TAH, IMI, DN, PN, Kvs, Tmin/max, serial number, valve body material and flow direction arrow, label. CE-marking: DN : CE DN 150: CE 0062 * *) Notified body. Surface treatment: DN 32-50: Non treated DN : Electrophoretic painting. Connection: DN 32-50: Female thread according to ISO 228. Thread length according to ISO 7/1. DN : Flanges according to EN , type 21. Face to face length according to EN 558 series 1.

14 Technical descriptions TA-FUS1ON-C Application: Heating and cooling systems. Functions: Control (EQM) Balancing Pre-setting (Kvs) Measuring ( pv, H, T, q) Shut-off (for isolation during system maintenance) Dimension: DN Pressure class: DN 32-50: PN 16 DN : PN 16 and PN 25 Max. differential pressure ( pv): DN 32-50: 350 kpa = 3,5 bar DN : 400 kpa = 4 bar Recommended setting range (Kvmax): DN 32: 2,68-12,9 DN 40: 3,03-18,5 DN 50: 8,03-33,0 DN 65: 25,5-65,4 DN 80: 35,9-100 DN 100: 57,4-160 DN 125: 97,4-270 DN 150: Kvmax = m³/h at a pressure drop of 1 bar at each setting and fully open valve plug. Lift: 20 mm Rangeability: >100 (for all recommended settings) Leakage rate: Tight sealing Characteristics: Independent EQM. Temperature: Max. working temperature: 120 C Min. working temperature: -20 C Media: Water or neutral fluids, water-glycol mixtures. (For other media contact TA Hydronics.) Material: DN 32-50: Valve body: AMETAL Valve plug: AMETAL Seat seal: EPDM/Stainless steel Spindle seal: EPDM O-ring O-rings: EPDM Valve insert: AMETAL /PPS/PTFE Springs: Stainless steel Spindle: Stainless steel DN : Valve body: Ductile iron EN-GJS-400 Valve plug: Stainless steel Seat seal: EPDM/Stainless steel O-rings: EPDM Plug mechanism: Stainless steel and brass Screws and nuts: Stainless steel AMETAL is the dezincification resistant alloy of TA Hydronics. Surface treatment: DN 32-50: Non treated DN : Electrophoretic painting TBV-CMP Application: Heating and cooling systems. Functions: Control Pre-setting (of flow) Differential pressure control Measuring Shut-off Flushing Dimensions: DN Pressure class: PN 16 Differential pressure (ΔpV): Max. differential pressure: 350 kpa (Δ Hmax) Min. differential pressure: 15 kpa (Δ Hmin) (Valid for position 10, fully open. Other positions will require lower differential pressure, check with the software TASelect) Flow range: The flow (qmax) can be pre-set within the range: DN 15 LF: l/h DN 15 NF: l/h DN 20 NF: l/h DN 25 NF: l/h Minimum controllable flow: DN 15 LF: 3 l/h DN 15 NF: 7 l/h DN 20 NF: 10 l/h DN 25 NF: 20 l/h Temperature: Max. working temperature: 120ºC Min. working temperature: -20ºC Lift: 4 mm Characteristic: See diagrams under Valve characteristics. Material: Valve body: AMETAL Valve plug: PPS (polyphenylsulphide) Seat seal: EPDM/Stainless steel (DN 15-20). EPDM/AMETAL (DN 25). Spindle seal: EPDM O-ring Valve insert: AMETAL, PPS (polyphenylsulphide) Spring: Stainless steel Spindle: Nedox coated AMETAL Membrane: HNBR AMETAL is the dezincification resistant alloy of TA. Marking: Body: TA, PN 16, DN, inch size and flow direction arrow. Identification ring on measuring point: White = Low flow (LF) Black = Normal flow (NF)

15

16 Reece. Works for you. Call or visit for your nearest Reece branch. Due to limitations in the printing process the colours in this brochure are a guide only. The manufacturer/distributor reserves the right to vary specifications or delete models from their range without prior notification. The manufacturer/distributor takes no responsibility for printing errors. All products enjoy a product replacement warranty. For full warranty details visit quality V1 [BROCHURE CODE ]