HOW TO DOWNLOAD AND INSTALL ANDROID AUTO Looks like you re ready to take things up a notch. To ensure the best in-car experience possible, please follow these step-by-step instructions. Android Auto is a trademark of Google Inc.
SOFTWARE DOWNLOAD STEP 1 Open a web browser on your computer If your operating system is Windows, open Internet Explorer or your default browser. STEP 2 STEP 3 If you are using MAC OS X, open Safari or your default browser. Go to the MyHyundai owner s site at https://www.hyundaiusa.com/myhyundai If you do not have a valid MyHyundai account, click Register. To register, enter your name, email, and zip code.
Enter your Vehicle Identification Number (VIN) to finish your registration. The VIN is usually located on the driver s side dashboard (viewable from the windshield) or inside the driver s side door (on a sticker). STEP 4 Click Next to finish the registration process. If you have a valid account, Click Log In. Enter your MyHyundai account and password.
STEP 5 Upon login, if you have more than one vehicle, select 2015 Sonata on the drop-down menu in the top left of the navigation bar. STEP 6 Once you get to the Sonata 2015 page, select Downloads in the navigation then Android Auto on the Downloads drop-down. You will then be navigated to the Android Auto Download Page.
STEP 7 On the Android Auto Download Page Check the box next to I agree to the terms and conditions to activate the download button. Once the download button is active, click it to start the download. Select Continue
STEP 8 MAC Once the download is complete, open the downloaded DMG file. By default, the file will be in your Downloads Folder. Select Open on the system warning popup screen. Double-click on the Hyudai icon, and continue to step 9. WINDOWS Select Run to download and execute the Download Tool.
The Download Tool will be downloaded. This will not take long. Select Yes to run the Download Tool.
STEP 9 Upon completing the download, the Download Tool will start. STEP 10 Connect a compatible USB drive to your computer. Otherwise, the update process will not proceed until an appropriate USB drive is connected. NOTE: USB drive should be formatted either FAT16 or FAT32, its available size should be greater than 1GB and less than 32GB.
If more than one USB drive is connected to your computer, please select the USB you want to use. STEP 11 Vehicle software is being downloaded. DO NOT disconnect your USB drive until the download is complete.
STEP 12 The Download Tool will automatically extract the downloaded files. STEP 13 Download Tool will then copy the extracted files to the USB drive.
STEP 14 Vehicle software has been downloaded to your USB drive. STEP 15 Disconnect the USB drive from your computer. VEHICLE SOFTWARE UPDATE STEP 1 Park your vehicle in a well ventilated area and start the engine. The update will take approximately 40 minutes. NOTE: Your radio presets may be lost during this update. Take note of them before you begin the update.
STEP 2 Connect the USB drive with the vehicle software on it to the USB port in your vehicle. STEP 3 Press the SETUP key on your radio. STEP 4 Scroll down and tap the System Info icon on the screen.
STEP 5 Tap Update at the bottom of the screen.
STEP 6 DO NOT turn off the engine during the update process. NOTE: There will be multiple occurrences where your display screen will go black. This is normal.
STEP 7 Software Update is now complete, the system will automatically reboot to the Disclaimer or home screen.
STEP 8 Go to System Info and confirm that your S/W Version has been updated to: S/W VER. ST.LF.USA.E478.15430. STEP 9 Navigate to Connectivity Settings in the Setup menu and turn On Enable Android Auto.
TROUBLESHOOTING If an error code or Update Fail message occurs, use a ballpoint pen to press the Reset button located next to the Tune knob. NOTE: Hyundai shall not be liable for any issues caused by user software installation that fails to comply with the instructions provided.