Technical Data Sheet 3mm Infrared LED, T-1 Features High reliability High radiant intensity Peak wavelength p=85nm 2.54mm Lead spacing Low forward voltage Pb free HIR24 Descriptions EVERLIGHT s infrared emitting diode(hir24) is a high intensity diode, molded in a yellow transparent plastic package. The device is spectrally matched with phototransistor, photodiode and infrared receiver module. Applications Free air transmission system Optoelectronic switch Floppy disk drive Infrared applied system Camera Device Selection Guide LED Part No. Chip Material Lens Color HIR GaAlAs Yellow Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2.1 Page: 1 of 7
Package Dimensions HIR24 Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions.25mm Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Units Continuous Forward Current I F ma Peak Forward Current I FP 1. A Reverse Voltage V R 5 V Operating Temperature T opr -4 ~ +85 Storage Temperature T stg -4 ~ +85 Soldering Temperature T sol 26 Power Dissipation at(or below) 25 Free Air Temperature P d 15 mw Notes: *1:I FP Conditions--Pulse Width s and Duty 1%. *2:Soldering time 5 seconds. Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2.1 Page: 2 of 7
HIR24 Electro-Optical Characteristics (Ta=25 ) Parameter Symbol Condition Min. Typ. Max. Units I F =2mA 7.8 17.6 -- Radiant Intensity Ee I F =ma Pulse Width s,duty 1% -- 9 -- mw/sr I F =1A Pulse Width s,duty 1%. -- 9 -- Peak Wavelength p I F =2mA -- 85 -- nm Spectral Bandwidth I F =2mA -- 45 -- nm Forward Voltage V F I F =ma Pulse Width s,duty 1% I F =1A Pulse Width s,duty 1%. I F =2mA 1.45 1.65 -- 1.8 2.4 -- 4. 5.25 Reverse Current I R V R =5V -- -- A View Angle 2 1/2 I F =2mA -- 25 -- deg V Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2.1 Page: 3 of 7
Typical Electro-Optical Characteristics Curves Fig.1 Forward Current vs. Fig.2 Spectral Distribution Ambient Temperature HIR24 8 6 4 2 IF=2mA Ta=25 C -4-2 2 4 6 8 79 8 83 85 87 89 9 93 95 Fig.3 Peak Emission Wavelength Ambient Temperature 9 Fig.4 Forward Current 4 vs. Forward Voltage 875 3 85 825 2 8-25 25 5 75 1 1 2 3 4 5 6 7 8 Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2.1 Page: 4 of 7
HIR24 Typical Electro-Optical Characteristics Curves Fig.5 Relative Intensity vs. Fig.6 Relative Radiant Intensity vs. Forward Current Angular Displacement -2-2 Ie-Radiant Intensity(mW/sr) 1 2 3 IF-Forward Current (ma) 4 1..9.8.7.6.4.2.2.4.6 3 4 5 6 7 8 Fig.7 Relative Intensity vs. Ambient Temperature( C) Fig.8 Forward Voltage vs. Ambient Temperature( C) 25 1.6 Ie-Radiant Intensity (mw/sr) 2 15 IF=2mA 1.4 1.2 1 IF=2mA Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2.1 Page: 5 of 7
HIR24 Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level 9% LTPD % NO. Item Test Conditions Test Hours/ Cycles Sample Sizes Failure Judgement Criteria 1 Solder Heat TEMP. 265 secs 22pcs /1 2 Temperature Cycle H : + 15mins 5mins 5Cycles 22pcs I R U 2 Ee L.8 /1 L : -4 15mins V F U 2 3 Thermal Shock H :+ 5mins 4 High Temperature Storage 5 Low Temperature Storage L :- secs 5mins Ac/Re 5Cycles 22pcs /1 U Upper TEMP. + hrs 22pcs Limit /1 L Lower TEMP. -4 hrs 22pcs Specification /1 Limit 6 DC Operating Life I F =2mA hrs 22pcs /1 7 High Temperature/ 85 / 85% R.H hrs 22pcs /1 High Humidity Specification Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2.1 Page: 6 of 7
HIR24 Packing Quantity Specification 1.PCS/1Bag 4Bags/1Box 2.Boxes/1Carton Label Form Specification HIR24 CPN: Customer s Production Numb P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production Place Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don t reproduce or cause anyone to reproduce them without EVERLIGHT s consent. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-636 Tucheng, Taipei 236, Taiwan, R.O.C http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev 2.1 Page: 7 of 7