1 W High Power LED TPLG-MR7171LS-H11-1G. 1 W High Power Warm White LED. Features. Applications. Device Selection Guide

Transcription

1 1 W High Power LED 1 W High Power Warm White LED Features InGaN technology High flux output Lambertian distribution pattern Flexible lens design Good reliability performance RoHS Compliance M7171 Applications Illumination LCD backlight Automotive application Flashlight Architectural lighting Medical application Indictor/ Decoration Device Selection Guide Part No. Material Chip Emitted Color Lens Color InGaN Warm White Water Clear TAITRON COMPONENTS INCORPORATED Tel: (800)-TAITRON (800) (661) Fax: (800)-TAITFAX (800) (661) Page 1 of 7

2 Absolute Maximum Ratings (Ta=25 C) Parameter Symbol Typ. Value Max. Unit Reverse Voltage VR V Forward Current (1) IF ma Peak Pulsed Forward Current (2) IPF ma Power Dissipation Pd W Operating Temperature Topr ~ +85 C Storage Temperature Tstg ~ +100 C LED Junction Temperature Tj C Notes: 1. The maximum forward current can be applied only at condition that the LED junction temperature is below the maximum. A proper heat sink is required to attach LED if the forward driving current is above 150mA. 2. Duty Ratio=1/10, Pulse Width = 10ms. 3. When LED is used at high temperature, the driving current should be decreased to keep LED from damage. Electro-Optical Characteristics (Ta=25 C) Parameter Symbol Min. Typ. Max. Unit Condition Total Flux (1) Φv Im Total Including Angle (4) θ0.9v deg Viewing Angle 2θ1/ deg Chromaticity Coordinates x y IF =350mA Spectra Half Width λ nm Forward Voltage (2) VF V Thermal Resistance (3) θjs C/W Reverse Current IR ua VR=5V Notes: 1. Luminous flux measurement tolerance: ±15% 2. Forward voltage measurement tolerance: ±0.05V 3. θjs means thermal resistance between LED junction to heat slug of LED. 4. Viewing angle 0.9V is the including angle at which 90% of total luminous flux is captured. Page 2 of 7

3 Typical Electro-Optical Characteristics Curves (Ta=25 C) Spectral Distribution Forward Voltage vs. Forward Current Forward Current IF (ma) Relative luminous intensity (%) Relative luminous intensity (%) Wavelength λ(nm) Relative Luminous Intensity vs. Ambient Temperature Ambient Temperature Ta ( C) Forward Current vs. Ambient Temperature Forward Current IF (ma) Forward Voltage VF (V) Relative Luminous Intensity vs. Forward Current Relative luminous intensity (%) Forward Current IF (ma) Radiation Diagram Ambient Temperature Ta ( C) Page 3 of 7

4 Package Outline Dimensions (Unit=mm) Note: 1. The anode side of device is denoted by a hole in the lead frame. 2. The tolerances unless mentioned is ±0.2mm, Unit = mm Packing Quantity Specification Packing Type Tube Inner Box Carton Qty (pcs) 50 1,500 9,000 Box Size (mm) x90x70 425x200x245 Page 4 of 7

5 Ordering Information TP L G M R 7171 LS H 1 1 1G 88 TU Rank combination Total Luminous Flux Bin Rank Lead Free Plastic Tube Factory Location Code Rank Code Power Code Chip Count Code Heatsink Insulated Lambertain, 120 degree Size Code in mm Dome Top Warm White Color Gullwing Type Lead with Wing Taitron High Power LED Bin Code Min. Max. Condition 1G IF =350mA Note: Luminous flux measurement tolerance: ±15% Forward Voltage Bin Rank Bin Code Min. Max. Condition A B C IF =350mA D Note: Forward voltage measurement tolerance: ±0.05V Page 5 of 7

6 Warm white Chromaticity Coordinates Specifications for Bin Grading Note: The chromatic coordinates measurement tolerance: ± Page 6 of 7

7 How to contact us US HEADQUARTER WEST HARRISON PARKWAY, VALENCIA, CA Tel: (800) TAITRON (800) (661) Fax: (800) TAITFAX (800) (661) TAITRON COMPONENTS MEXICO, S.A.DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P MEXICO Tel: Fax: TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP BRAZIL Tel: Fax: TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN AN ROAD, SUITE 1503, SHANGHAI , CHINA. Tel: Fax: Page 7 of 7