Training Norway Drilling Equipment Courses PRODUCT FLYER Training information Molde
NOV Training Norway NOV welcomes you to our training facilities in Norway. These facilities include drilling simulators, classrooms and miscellaneous hands-on training equipment. As your partner in training we have a strong focus on safety. Procedures for safe and monitoring of critical parameters are important to ensure safe and maintenance. NOV Training Norway offers highly educated instructors with knowledge and insight into our equipment and systems. We have extensive experience in training offshore personnel. With genuine respect for our participants, we strive to give them training adapted to their level of experience. In our persistent effort to better serve our customers, we have over the years developed a first-rate training department. We offer tailor made course packages according to content, duration and our customers needs. In addition we offer open enrollment Product Line Courses. We believe in learning by doing and therefore the majority of our courses offer hands-on training with real life scenarios. KRISTIANSAND STAVANGER Rig Specific Courses Rig Specific Courses Electro Technical Operators Mechanical 6 9 13 Electro Technical Operators Mechanical 30 33 36 Product Line Courses Product Line Courses Electro Technical Operators Mechanical All Personnel 16 20 23 26 Electro Technical Operators Mechanical All Personnel 39 43 47 50 2 training.norway@ 3
Rig Specific - Kristiansand NOV Training specializes in Rig Specific training. As Original Equipment Manufacturers our course material is produced by our instructors in co- with engineers, designers and course developers. Presentations, handouts, exercises and exams are tailor made for each Rig Specific course. Rig Specific NOV drawings and manuals are used throughout the course. A number of our courses can also be delivered onboard. All our customers have the possibility to purchase Rig Specific software for the Drilling Simulator. You can find our Product Line courses on page 15 4 PRODUCT FLYER Training information Molde training.norway@ 5
Rig Specific Rig Specific Course Descriptions Electro Technical KRS 1320 Well Intervention Electro Technical Course The course will provide the necessary knowledge for using the Simatic S7 Manager as a troubleshooting tool for the specified NOV equipment. Course participants shall understand the basic functions of the Siemens Simatic S7 PLC System and be able to utilize the Simatic Manager software by training on a NOV PLC test station. In addition, learners will obtain sufficient technical knowledge to perform maintenance and solve unforeseen occurrences on the onboard equipment (as listed in the course curriculum). KRS 1021 Hands-on Troubleshooting Course, Drilling Equipment & Knuckle Boom Crane, Advanced ET The participants will obtain technical skills to perform maintenance, troubleshooting and to solve unforeseen occurrences on the systems/ equipment listed below. This course is based on the participants solving various troubleshooting scenarios with use of hands-on training equipment listed below. Approximately 85% of the course will be hands-on. Electro Technical Maintenance course are Electrical Engineers and ET Personnel for Well Intervention Systems Electrical or Electro Technical background This course is designed for experienced ET Personnel Prior to attending the course, each course participant should have at least one of the following: * Completed NOV Cyberbase Drilling Equipment & System Training and had at least 6 months experiences on a rig after that. * Successfully completed online pre-assessment. Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain the electrical system of the equipment KRS 1020 Drilling Equipment Electro Technical Course The course will provide the necessary knowledge for using the Simatic S7 Manager as a troubleshooting tool for the specified NOV equipment. Course participants shall understand the basic functions of the Siemens Simatic S7 PLC System and be able to utilize the Simatic Manager software by training on a NOV PLC test station. In addition, learners will obtain sufficient technical knowledge to perform maintenance and solve unforeseen occurrences on the onboard equipment (as listed in the course curriculum). Electrical Engineers and ET Personnel for Drilling- and Motion Compensating/ Sub Sea Equipment Electrical or Electro Technical background Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain the electrical system of the equipment Classroom: Rig specific user manuals, PLC, Instrumentation, software upon course completion, course participants shall be able to: Utilize the information in NOV User manuals. Familiar with the NOV PLC program structure, identify the NOV standard program blocks and demonstrate how to search and monitor in the PLC programs. Identify different instruments used on NOV machinery. Simulator Training (rig specific if available): Upon course completion, course participants shall be able to: Set up the different machines for Run the machines in different operating modes Locate information/alarms/messages on Cyberbase displays Troubleshoot using information on Cyberbase displays Set up ServiceLab on ehawk PC Monitor signals in the machine PLC program Analyze fault symptoms Utilize the information to suggest possible solutions for correcting the faults NOV Hands On Workshop : Upon course completion, course participants shall be able to: Locate the instruments Troubleshoot by utilizing the PLC program, ServiceLab and measuring instruments Analyze fault symptoms and correct the faults Utilize relevant software for troubleshooting and configuration of hardware. 6 training.norway@ 7
Rig Specific Course Descriptions Operators As your Original Equipment Manufacturer NOV offers you first class drilling equipment training. 8 training.norway@ 9
Rig Specific Add-on Equipment / System Rig Specific NOR 5010 Cyberbase & Drilling Equipment Operator Course This course is designed to provide participants with knowledge of Cyberbase, control and interaction of NOV drilling equipment and systems. Operation instructions and technical description of equipment will be discussed in detail with regards to the NOV manual. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. Drilling Section Leaders (Toolpushers), Drillers and Assistant Drillers Experience and practical understanding of the drilling process and of the specific drilling equipment Explain main data, range of application and function of the equipment and systems Explain and demonstrate navigation of various HMI displays Outline technical specifications of equipment Explain how to utilize NOV user manuals Solve practical exercises in Drilling Simulator and on Cyberbase System Training Station NOR 5013 Cyberbase & Drilling Equipment Pipe Handling Course This course is designed to provide participants with valuable knowledge of the pipe handling functions of the Cyberbase Control System and NOV drilling equipment. Special focus will be on the pipe handling procedures and hands-on training in Drilling Simulator. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. Drilling Section Leaders (Toolpushers), Derrickman, Roughnecks and Assistant Drillers Understanding of drilling process Explain range of application and function of the equipment & systems Explain and demonstrate navigation of various HMI displays Outline technical specifications of equipment Examine manual run and auto run in simulator Solve practical exercises and troubleshooting in Drilling Simulator and on Cyberbase System Training Station NOR 5011 Cyberbase & Drilling Equipment Performance Operator Course This course is designed to provide participants with skills on Cyberbase Control System and NOV drilling equipment. The majority of the course is hands-on training in our Drilling Simulator with focus on increased performance level for the drilling crew and solving troubleshooting scenarios. Drilling Section Leaders (Toolpushers), Drillers, Assistant Drillers, Roughnecks, Floor hands and Derrickman NOV Cyberbase & Drilling Equipment Operator course or experience 5 participants Explain and demonstrate setup of equipment and systems Outline technical specifications in troubleshooting situations Solve practical scenarios in Drilling Simulator and extensive troubleshooting KRS 1310 Well Intervention Operator Course The course will provide learners with sufficient technical knowledge to operate the on-board equipment (as listed in the assembled course curriculum for onboard equipment) in a correct, safe and efficient manner. Participants will learn about the equipment s intention, construction and manner of, including system design (i.e. hydraulic, electrical, mechanical, control system). The course also focuses on the interaction of the equipment on a specific rig/ vessel (System integration) and during the whole course, NOV User Manuals will be utilized to locate pertinent information. Furthermore, participants will learn how to utilize the NOV spare part system and what to do if Technical Support/ Service is needed. Operators of Well Intervention Systems. Participants should have relevant experience Explain the equipment s intention, construction and manner of Explain how to ensure safe and efficient of the equipment Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual SoftSpeed about the damage caused on string and equipment by torsional vibrations, how SoftSpeed works and how it can be used in an efficient manner. DFR This course is designed to prepare participants to understand the Drilling Flight Recorder s intention, topology and functions. Participants also practice the of relevant functions. DC/HVAC/CYB This course is designed as an introduction to the Driller s Cabin, HVAC and Cyberbase Operator Station. Participants will focus on its safe and efficient. MMC Complete This course is designed to teach the participants the intention, set-up and of the Multi Machine Control system. This includes trip-in/out as well as stand building/breaking and drilling support. The participants will practice these processes and solve troubleshooting scenarios in the Drilling Simulator. MMC Trip-in/out This course is designed with special focus on the trip-in/out function. Participants will focus on troubleshooting. PIM This course is designed to help the participants achieve sufficient technical skills and understanding of the Pipe Interlock Management, in order to run the equipment in a safe and efficient manner. 3 s 1 1 Guide Arms for the Guide Arms. HPU for the Hydraulic Power Unit. EBT for the Elevated Backup Tong. RCWM for the Riser Catwalk Machine. PCWM for the Pipe Catwalk Machine. Catheads for the Catheads. Riser Tensioner for the Riser Tensioner. Mousehole for the Mousehole. 1 10 training.norway@ 11
Rig Specific Course Descriptions Mechanical A highly trained workforce creates a competitive advantage in the marketplace. 12 training.norway@ 13
Rig Specific KRS 1030 Drilling Equipment Hydraulic Mechanical Maintenance Course During the course, course participants will obtain sufficient technical knowledge to perform maintenance and solve unforeseen occurrences on the on-board equipment (as listed in the assembled course curriculum for onboard equipment). They will learn about system design, the equipment s intention, construction and manner of in order to be able to perform inspections, trouble shooting, maintenance and repairs in a correct, efficient and safe manner and as described in the user manual. Maintenance personnel for Drilling Equipment Before attending the course, each participant should have relevant experience and basic hydraulic knowledge Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual KRS 1330 Well Intervention Hydraulic Mechanical Maintenance Course During the course, course participants will obtain sufficient technical knowledge to perform maintenance and solve unforeseen occurrences on the on-board equipment (as listed in the assembled course curriculum for onboard equipment). They will learn about system design, the equipment s intention, construction and manner of in order to be able to perform inspections, trouble shooting, maintenance and repairs in a correct, efficient and safe manner and as described in the user manual. Maintenance personnel for Drilling Equipment Before attending the course, each participant should have relevant experience Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual KRS 1110 Motion Compensation Combined Course for Operation and Hydraulic Mechanical Maintenance During the course, participants will obtain sufficient technical knowledge to operate and perform maintenance on the on-board Motion Compensation/ Subsea Equipment (as listed in the assembled course curriculum). They will learn about system design, the equipment s intention, construction and manner of, including system interaction. Learning about the operating procedures and how to perform inspections, trouble shooting, maintenance and repairs enables each learner to operate the equipment in question, in addition to perform inspections, trouble shooting, maintenance and repairs in a correct, efficient and safe manner. During the whole course, participants will be trained in utilizing Rig Specific User s Manuals to locate pertinent information, and hence be better prepared for the on-board reality. Motion Compensation/ Sub Sea personnel. Relevant experience Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual Product Line Open Enrollment Kristiansand Understanding and anticipating your needs pushes us forward. With that in mind NOV Training offers you open enrollment Product Line training. Each course is a standard course that covers the most common versions of equipment and systems on a rig. This enables our customers to send individual personnel to generic courses. Scheduled courses are sold on a per seat basis. They are open to enrollment for all customers and may include participants from various companies, disciplines and rigs. You can find our Rig Specific courses on page 5 14 training.norway@ 15
Product Line Product Line Product Line Course Descriptions Electro Technical KRS 1025-5 Hands-on Troubleshooting Course, Drilling Equipment & Knuckle Boom Crane, Advanced ET 4 s The participants will obtain technical skills to perform maintenance, troubleshooting and to solve unforeseen occurrences on the systems/ equipment listed below. This course is based on the participants solving various troubleshooting scenarios with use of hands-on training equipment listed below. Approximately 85% of the course will be hands-on. This course is designed for experienced ET Personnel Prior to attending the course, each course participant should have at least one of the following: * Completed NOV Cyberbase Drilling Equipment & System Training and had at least 6 months experiences on a rig after that. * Successfully completed online pre-assessment. Classroom: NOV User Manuals, PLC, Instrumentation, Software Upon course completion, course participants shall be able to: Utilize the information in NOV User manuals. Familiar with the NOV PLC program structure, identify the NOV standard program blocks and demonstrate how to search and monitor in the PLC programs. Identify different instruments used on NOV machinery. NOV Simulator Training: Upon course completion, course participants shall be able to: Set up the different machines for Run the machines in different operating modes Locate information/alarms/messages on Cyberbase displays Troubleshoot using information on Cyberbase displays Set up ServiceLab on ehawk PC Monitor signals in the machine PLC program Analyze fault symptoms Utilize the information to suggest possible solutions for correcting the faults NOV Hands On Workshop : Upon course completion, course participants shall be able to: Locate the instruments. Troubleshoot by utilizing the PLC program, ServiceLab and measuring instruments. Analyze fault symptoms and correct the faults. Utilize relevant software for troubleshooting and configuration of hardware. NOV 9020-1 Introducion to Siemens Step 7 PLC Course 5 s This course is designed for participants who require basic PLC knowledge and need an introduction to Siemens Step 7. It will familiarize users with the Siemens S7-300 PLCs and Siemens Step7 software. The participants will study general basics of PLC technology, Step7 setup, structure, addressing, hardware modules, remote I/O and project handling using the Cyberbase System Training Station. This course is designed for personnel working with Siemens PLC s None Describe basic PLC terminology and recognize the three programming languages associated with NOV PLC s: LAD, FBD and STL Explain Step7 PLC control system safety, features and design Distinguish between different features in Step7 Utilize Step7 structure Utilize Step7 addressing system Demonstrate use of analog signal modules in Step7 Demonstrate use of Remote I/O Demonstrate how to handle projects in Step7 Demonstrate their Steip7 PLC practical skills KRS 1025-1 HPS Series Top Drives Electro Technician Course This course is designed to train participants the s, electrical system, and troubleshooting of the Topdrive HPS. The major components and the functions of the mechanical and electrical system will be discussed. The participants will get a complete coverage of the electrical system. Troubleshooting procedures will be explained in accordance with the NOV User Manual. Part of the course will be spent in the simulator, operating the machine in different modes and in interaction with other machines on the drill floor. Troubleshooting by use of Cyberbase operator station will be a part of the simulator training. A field trip to the test facility will also take place if time allows. Electrician, electro technicians and all personnel involved with electro technical maintenance General computer skills and understanding of electrical systems 2 s Describe the HPS Topdrive in general terms, its components and purpose Explain safety relevant to maintenance, troubleshooting and of the HPS Topdrive Explain the use of controls, alarms and functionality of relevant Cyberbase screen displays Navigate in the PLC program of the HPS Topdrive and use Simatic Manager as a troubleshooting tool Operate and troubleshoot on the HPS Topdrive in our drilling simulator Solve practical exercises and troubleshoot using live instrumentation and software 16 training.norway@ 17
Product Line Product Line KRS 1025-2 MPT200/ARN200 Iron Roughneck KRS 1025-3 MPT270/ARN270 Iron Roughneck Electro Technician Course 3 s Electro Technician Course 3 s This course is designed to train participants the s, electrical system, and troubleshooting of the Hydratong ARN/MPT 200. The major components and the functions of the mechanical and electrical system will be discussed. The participants will get a complete coverage of the electrical system. Troubleshooting procedures will be explained in accordance with the NOV User Manual. Part of the course will be spent in the simulator, operating the machine in different modes and in interaction with other machines on the drill floor. Troubleshooting by use of Cyberbase operator station will be a part of the simulator training. Hands on training and troubleshooting will be done in our workshop with Mini Cyberbase and MPT200 available. A field trip to the test facility will also take place if time allows. Electrician, electro technicians and all personnel involved with electro technical maintenance General computer skills and understanding of electrical systems This course is designed to train participants the s, electrical system, and troubleshooting of the Hydratong ARN/MPT 270. The major components and the functions of the mechanical and electrical system will be discussed. The participants will get a complete coverage of the electrical system. Troubleshooting procedures will be explained in accordance with the NOV User Manual. Part of the course will be spent in the simulator, operating the machine in different modes and in interaction with other machines on the drill floor. Troubleshooting by use of Cyberbase operator station will be a part of the simulator training. Note: Hands on training and troubleshooting will be done in our workshop with Mini Cyberbase and MPT200 available. An ARN270 main frame/tool frame (not al) is available to become familiar with the construction. A field trip to the test facility will also take place if time allows. Electrician, electro technicians and all personnel involved with electro technical maintenance KRS 1025-4 HR III/IV HydraRacker and Fingerboard NOV 9026-1TDX Series Top Drives Electro Technician Course 3 s Electro Technician Course 2 s This course is designed to train participants the s, electrical system, and troubleshooting of the HydraRacker III/IV. The major components and the functions of the mechanical and electrical system will be discussed. The participants will get a complete coverage of the electrical system. Troubleshooting procedures will be explained in accordance with the NOV User Manual. Part of the course will be spent in the simulator, operating the machine in different modes and in interaction with other machines on the drill floor. Troubleshooting and emergency by use of Cyberbase operator station will be a part of the simulator training. A field trip to the test facility will also take place if time allows. Electrician, electro technicians and all personnel involved with electro technical maintenance General computer skills and understanding of electrical systems This course is designed to train participants the s, electrical system, and troubleshooting of the Topdrive TDX. The major components and the functions of the mechanical and electrical system will be discussed. The participants will get a complete coverage of the electrical system. Troubleshooting procedures will be explained in accordance with the NOV User Manual. Part of the course will be spent in the simulator, operating the machine in different modes and in interaction with other machines on the drill floor. Troubleshooting by use of Cyberbase operator station will be a part of the simulator training. Electrician, electro technicians and all personnel involved with electro technical maintenance General computer skills and understanding of electrical systems Describe the Hydratong in general terms, its components and purpose Explain safety relevant to maintenance, troubleshooting and of the Hydratong Explain the use of controls, alarms and functionality of relevant Cyberbase screen displays Navigate in the PLC program of the Hydratong and use Simatic Manager as a troubleshooting tool Operate, troubleshoot and perform maintenance on the Hydratong in our workshop Operate the Hydratong in our drilling simulator Solve practical exercises and troubleshoot using live instrumentation and software General computer skills and understanding of electrical systems Describe the Hydratong in general terms, its components and purpose Explain safety relevant to maintenance, troubleshooting and of the Hydratong Explain the use of controls, alarms and functionality of relevant Cyberbase screen displays Navigate in the PLC program of the Hydratong and use Simatic Manager as a troubleshooting tool Operate, troubleshoot and perform maintenance on the Hydratong in our workshop Solve practical exercises and troubleshoot using live instrumentation and software Describe the Hydraracker in general terms, its components and purpose Explain safety relevant to maintenance, troubleshooting and of the Hydraracker Explain the use of controls, alarms and functionality of relevant Cyberbase screen displays.navigate in the PLC program of the Hydraracker and use Simatic Manager as a troubleshooting tool Operate and troubleshoot on the Hydraracker in our drilling simulator Solve practical exercises and troubleshoot using live instrumentation and software Describe the TDX Topdrive in general terms, its components and purpose Explain safety relevant to maintenance, troubleshooting and of the TDX Topdrive Explain the use of controls, alarms and functionality of relevant Cyberbase screen displays Navigate in the PLC program of the TDX Topdrive and use Simatic Manager as a troubleshooting tool Operate and troubleshoot on the TDX Topdrive in the drilling simulator Solve practical exercises and troubleshoot using live instrumentation and software 18 training.norway@ 19
Product Line Product Line Product Line Course Descriptions Operators NOR 5010-1 Cyberbase & Drilling Equipment Operator Course (AHD DW / TDX TD) 10 s This course is designed to provide participants with knowledge of Cyberbase, control and interaction of NOV drilling equipment and systems. Operation instructions and technical description of equipment will be discussed in detail with regards to the NOV manual. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. This course is one of two options, the equipment varies according to the equipment matrix. Drilling Section Leaders (Toolpushers), Drillers and Assistant Drillers Experience and practical understanding of the drilling process and of the specific drilling equipment 5 participants Explain main data, range of application and function of the equipment and systems Explain navigation of various HMI displays Outline technical specifications of equipment Explain how to utilize NOV user manuals Solve practical exercises in Drilling Simulator and on Cyberbase System Training Station NOR 5010-2 Cyberbase & Drilling Equipment Operator Course (SSGD DW / HPS TD) 10 s This course is designed to provide participants with knowledge of Cyberbase, control and interaction of NOV drilling equipment and systems. Operation instructions and technical description of equipment will be discussed in detail with regards to the NOV manual. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. This course is one of two options, the equipment varies according to the equipment matrix. Drilling Section Leaders (Toolpushers), Drillers and Assistant Drillers Experience and practical understanding of the drilling process and of the specific drilling equipment 5 participants Explain main data, range of application and function of the equipment and systems Explain navigation of various HMI displays Outline technical specifications of equipment Explain how to utilize NOV user manuals Solve practical exercises in Drilling Simulator and on Cyberbase System Training Station NOR 5011-1 Cyberbase & Drilling Equipment NOR 5013-1 Cyberbase & Drilling Equipment Performance Operator Course 4 s Pipe Handling Course 5 s This course is designed to provide participants with skills on Cyberbase Control System and NOV drilling equipment. The majority of the course is hands-on training in our Drilling Simulator with focus on increased performance level for the drilling crew and solving troubleshooting scenarios. Drilling Section Leaders (Toolpushers), Drillers, Assistant Drillers, Roughnecks, Floor hands and Derrickman NOV Cyberbase & Drilling Equipment Operator course or experience 5 participants Explain setup of equipment and systems Outline technical specifications in troubleshooting situations Solve practical scenarios in Drilling Simulator and extensive troubleshooting This course is designed to provide participants with valuable knowledge of the pipe handling functions of the Cyberbase Control System and NOV drilling equipment. Special focus will be on the pipe handling procedures and hands-on training in the simulator. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. Drilling Section Leaders (Toolpushers), Derrickman, Roughnecks and Assistant Drillers Understanding of drilling process 5 participants Explain range of application and function of the equipment & systems Explain navigation of various HMI displays Outline technical specifications of equipment Examine manual run and auto run in simulator Solve practical exercises & troubleshooting in Drilling Simulator and on hands-on equipment 20 training.norway@ 21
Product Line Product Line Course Descriptions Mechanical NOR 5014-1 Cyberbase & Drilling Equipment Smart NOR 5019-1 Introduction to Cyberbase & Drilling Machine Integrator Course 3 s Equipment Course 5 s This course covers the intention, construction and of the Smart Machine Integrator (SMI). The majority of this course is hands-on training in our drilling simulator and Cyberbase System Training Stations. Focus will be on safety and increased performance using the SMI system. This covers Anti Collision System (ACS), Pipe Interlock Management (PIM) and Multi Machine Control (MMC). Personnel responsible for the of NOV drilling and pipe handling equipment. Understanding of drilling and pipe handling processes. Basic knowledge of NOV Cyberbase controlled equipment or successfully completed KRS drilling equipment course. 4 participants Describe the theory of and how to ensure safe and correct use of SMI Demonstrate of the system in a secure, correct and efficient manner Solve practical scenarios and troubleshooting in drilling simulator This course is designed as an introduction to Cyberbase Operation and interaction of NOV drilling equipment and systems with some demonstrations and basic s in Drilling Simulator. OIM, Roughneck, Assistant Derrickman, Derrickman, ET, Mech. & Office personnel A practical understanding of the drilling process and of the specific drilling equipment 5 participants Explain basic functions of the equipment and systems Recognize navigation of various HMI displays Identify basic s shown in drilling simulator 22 training.norway@ 23
Product Line Product Line KRS 1001-1 Basic Hydraulics with Practical Tasks KRS 1035-5 HPU and Service and Access Basket 5 s Hydraulic Mechanical Course 2.5 s This course is designed to introduce basic hydraulics history and background, fluids, units, components, equipment, drawings and systems. Personnel working with hydraulic components None 5 participants Explain the equipment s intention, construction and manner of Describe the auxiliary systems Explain and safety systems of the equipment Demonstrate basic practical skills relevant to maintaining the system KRS 1035-1 HPS Series Top Drives Hydraulic Mechanical Course 2.5 s This course is designed to train the participants in maintenance, and mechanical troubleshooting of the Topdrive. The major components and the functions of the mechanical and hydraulic systems will be discussed. Periodic maintenance schedules and procedures will be explained in accordance with the NOV User Manual. The participants will get a complete coverage of the hydraulics. Part of the course will be spent in the simulator, operating the machine in different modes and the interaction with other machines on the drill floor. A field trip to the test facility will also take place if time allows. Hydraulic mechanics and all personnel involved with hydraulic mechanical maintenance General computer skills and understanding of hydraulics Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual This course is designed to train participants the s, maintenance, and mechanical troubleshooting of the HPU and Service and Access Basket. The major components and the functions of the mechanical and hydraulic systems will be discussed. Periodic maintenance schedules and procedures will be explained in accordance with the NOV User Manual. The participants will get a complete coverage of the hydraulics. A majority of the teaching will take place in the workshop where the participants will be able to work on the machine and test various safety functions and operate the equipment. Hydraulic mechanics and all personnel involved with hydraulic mechanical maintenance General computer skills and understanding of hydraulics Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual KRS 1035-4 HR III/IV HydraRacker and Fingerboard Hydraulic Mechanical Course 2.5 s This course is designed to train participants the s, maintenance, and mechanical troubleshooting of the HydraRacker III/ IV. The major components and the functions of the mechanical and hydraulic systems will be discussed. Periodic maintenance schedules and procedures will be explained in accordance with the NOV User Manual. The participants will get a complete coverage of the hydraulics. Part of the course will be spent in the simulator, operating the machine in different modes and the interaction with other machines on the drill floor. A field trip to the test facility will also take place if time allows. Hydraulic mechanics and all personnel involved with hydraulic mechanical maintenance General computer skills and understanding of hydraulics Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual 24 KRS 9036-1 TDX Series Top Drives Hydraulic Mechanical Course 2.5 s This course is designed to train the participants maintenance, and mechanical troubleshooting of the Topdrive TDX. The major components and the functions of the mechanical and hydraulic systems will be discussed. Periodic maintenance schedules and procedures will be explained in accordance with the NOV User Manual. The participants will get a complete coverage of the hydraulics. Part of the course will be spent in the simulator, operating the machine in different modes and the interaction with other machines on the drill floor. Hydraulic mechanics and all personnel involved with hydraulic mechanical maintenance General computer skills and understanding of hydraulics Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual KRS 1035-2 MPT200/ARN200 Iron Roughneck Hydraulic Mechanical Course 2.5 s This course is designed to train participants the s, maintenance, and mechanical troubleshooting of the MPT/ARN200. The major components and the functions of the mechanical and hydraulic systems will be discussed. Periodic maintenance schedules and procedures will be explained in accordance with the NOV User Manual. The participants will get a complete coverage of the hydraulics. Part of the course will be spent in the simulator, operating the machine in different modes and the interaction with other machines on the drill floor. A majority of the teaching will take place in the workshop where the participants will be able to work on the machine and test various safety functions and operate the equipment. A field trip to the test facility will also take place if time allows. Hydraulic mechanics and all personnel involved with hydraulic mechanical maintenance General computer skills and understanding of hydraulics Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual KRS 1035-3 MPT270/ARN270 Iron Roughnech KRS 1111-1 Motion Compensation Hyd/Mech Hydraulic Mechanical Course 2.5 s 5 s This course is designed to train participants the s, maintenance, and mechanical troubleshooting of the MPT/ARN270. The major components and the functions of the mechanical and hydraulic systems will be discussed. Periodic maintenance schedules and procedures will be explained in accordance with the NOV User Manual. The participants will get a complete coverage of the hydraulics. Part of the course will be spent in the simulator, operating the machine in different modes and the interaction with other machines on the drill floor. A field trip to the test facility will also take place if time allows. Hydraulic mechanics and all personnel involved with hydraulic mechanical maintenance General computer skills and understanding of hydraulics Explain the equipment s intention, construction and manner of Explain the operating procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual training.norway@ This course is designed to train participants the s, maintenance, and mechanical troubleshooting for the various NOV Motion Compensation equipment: -Crown Mounted Compensator in combination with Active Heave Compensator -Riser Tensioner System -High Pressure Air Systems (Compressors & Standby APV s) The major components and the functions of the mechanical and hydropneumatic systems will be discussed. Periodic maintenance schedules and -procedures as well as Troubleshooting procedures will be explained in accordance with the a generic User Manual. The participants will get a complete coverage of the hydraulics and pneumatics in the system. Part of the course will be spent in the simulator, operating the machine in different modes. Part of the course will be spent with hands-on on the Sauer Compressor (with Bentley Air Dryer), and down scaled CMC E model. Hydraulic / mechanical maintenance personnel (Sub Sea personnel). Relevant experience Explain the equipment s intention, construction and manner of Explain the procedures in order to perform maintenance in a correct, efficient and safe manner Explain how to do inspections, troubleshooting, maintenance and repairs as described in the user manual 25
All Personnel Product Line Training Facilities NOV Kristiansand NOV Training s main facility in Kristiansand is located in Skibaasen 2, just a ten minute drive from the city center, with easy access to bus and taxi transportation. We offer modern classrooms equipped with multiple projectors and equipment that enables us to give your employees in-depth training. We limit our classes to a maximum number of participants at a time, thus giving each participant more access to the instructor and the equipment for the training they need. KRS Airport, Kjevik Skibaasen 2 NOV 9000-2 Introduction to Drilling and Lifting Equipment Course 2 This course is designed to provide basic knowledge about the drilling process and the lifting- and handling equipment involved. This course will provide a basic knowledge of rig layout, of all the main equipment used on the rig for drilling activities, safety on board, as well as an introduction to where oil comes from and to how oil wells are made. Kristiansand All personnel None Course participants shall be able to recognize names, terms and abbreviation used on a rig/vessel. Course participants shall be able to explain the functions of the equipment and the drilling process. 26 training.norway@ 27
Rig Specific - Stavanger NOV Training Stavanger specializes in Rig Specific training. As Original Equipment Manufacturer our course material is produced by our instructors in co- with engineers, designers and course developers. Presentations, handouts, exercises and exams are tailor made for each Rig Specific course. Rig Specific software is installed on the Cyberbase System Training Stations in our classrooms. Rig Specific NOV drawings and manuals are used throughout the course. A number of our courses can also be delivered onboard. All our customers have the possibility to purchase Rig Specific software for the Drilling Simulator. You can find our Product Line courses on page 38 PRODUCT FLYER 28 Training information Molde training.norway@ 29
Rig Specific Rig Specific Rig Specific Course Descriptions Electro Technical SVG 2020 Cyberbase & Drilling Equipment Electro Technical Course This course is designed to provide participants with valuable knowledge in troubleshooting and maintenance of the Cyberbase Control System. The equipment and the functions of the electrical system will be discussed and participants will learn to utilize the information gained to troubleshoot and assist s. Participants will work with troubleshooting scenarios in accordance with NOV documentation. This includes hands-on training on Cyberbase System PLC s, and customized exercises in the Drilling Simulator. Senior Electronic Engineer (Electronics Section Leader), Electronic Engineer, Senior Electrician Engineer (Technical Section Leader), and Electrician Engineer (Assistant Technical Section Leader) Electrical or Electro Technical background Explain safety relevant to maintenance, troubleshooting and of the system Describe the system in general terms, its components and purpose Demonstrate basic navigation and administration of the system Perform troubleshooting and maintenance on the system 30 training.norway@ 31
Rig Specific Course Descriptions Operators Learning by doing is essential for technical studies. For that reason, NOV Training Stavanger puts great focus on Drilling Simulator training and practical hands-on exercises, using Rig Specific Cyberbase System Training Stations. 32 training.norway@ 33
Add-on Equipment / System Rig Specific Rig Specific SoftSpeed about the damage caused on string and equipment by torsional vibrations, how SoftSpeed works and how it can be used in an efficient manner. DFR This course is designed to prepare participants to understand the Drilling Flight Recorder s intention, topology and functions. Participants also practice the of relevant functions. DC/HVAC/CYB This course is designed as an introduction to the Driller s Cabin, HVAC and Cyberbase Operator Station. Participants will focus on its safe and efficient. MMC Complete This course is designed to teach the participants the intention, set-up and of the Multi Machine Control system. This includes trip-in/out as well as stand building/breaking and drilling support. The participants will practice these processes and solve troubleshooting scenarios in the Drilling Simulator. MMC Trip-in/out This course is designed with special focus on the trip-in/out function. Participants will focus on troubleshooting. 3 s 1 Guide Arms for the Guide Arms. HPU for the Hydraulic Power Unit. EBT for the Elevated Backup Tong. RCWM for the Riser Catwalk Machine. PCWM for the Pipe Catwalk Machine. Catheads for the Catheads. Riser Tensioner for the Riser Tensioner. 1 NOR 5010 Cyberbase & Drilling Equipment Operator Course This course is designed to provide participants with knowledge of Cyberbase, control and interaction of NOV drilling equipment and systems. Operation instructions and technical description of equipment will be discussed in detail with regards to the NOV manual. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. Drilling Section Leaders (Toolpushers), Drillers and Assistant Drillers Experience and practical understanding of the drilling process and of the specific drilling equipment Explain main data, range of application and function of the equipment and systems Explain and demonstrate navigation of various HMI displays Outline technical specifications of equipment Explain how to utilize NOV user manuals Solve practical exercises in Drilling Simulator and on Cyberbase System Training Station NOR 5013 Cyberbase & Drilling Equipment Pipe Handling Course This course is designed to provide participants with valuable knowledge of the pipe handling functions of the Cyberbase Control System and NOV drilling equipment. Special focus will be on the pipe handling procedures and hands-on training in Drilling Simulator. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. NOR 5011 Cyberbase & Drilling Equipment Performance Operator Course This course is designed to provide participants with skills on Cyberbase Control System and NOV drilling equipment. The majority of the course is hands-on training in our Drilling Simulator with focus on increased performance level for the drilling crew and solving troubleshooting scenarios. Drilling Section Leaders (Toolpushers), Drillers, Assistant Drillers, Roughnecks, Floor hands and Derrickman NOV Cyberbase & Drilling Equipment Operator course or experience 5 participants Explain and demonstrate setup of equipment and systems Outline technical specifications in troubleshooting situations Solve practical scenarios in Drilling Simulator and extensive troubleshooting PIM This course is designed to help the participants achieve sufficient technical skills and understanding of the Pipe Interlock Management, in order to run the equipment in a safe and efficient manner. 1 Mousehole for the Mousehole. Drilling Section Leaders (Toolpushers), Derrickman, Roughnecks and Assistant Drillers Understanding of drilling process Explain range of application and function of the equipment & systems Explain and demonstrate navigation of various HMI displays Outline technical specifications of equipment Examine manual run and auto run in simulator Solve practical exercises and troubleshooting in Drilling Simulator and on Cyberbase System Training Station 34 training.norway@ 35
Rig Specific Rig Specific Course Descriptions Mechanical SVG 2030 Drawworks and Mud Pump Mechanical Course This course is designed to give participants an understanding of the mechanical design, and maintenance of the equipment. We will provide practical training to participants on the Drilling Simulator, Drawworks Brake Caliper and Mud Pump components. Mechanical personnel Basic mechanical maintenance knowledge and experience Explain the equipment s intention, construction, and manner of Describe the auxiliary systems Explain the and safety systems of the equipment Demonstrate basic practical skills relevant to maintaining the system Shaffer Equipment Mechanical Subsea Equipment This course is designed to introduce and create knowledge and understanding of unit components, sequences, routine maintenance, and safety while testing and performing maintenance functions on Shaffer Subsea Equipment. Troubleshooting of the equipment is a critical area of focus. Toolpushers, Drillers, Assistant Drillers, Mechanics, Roughnecks, and Sub Sea Engineers None Identify the major components of the Shaffer Subsea equipment Use the user manuals to properly maintain and inspect the equipment Use the troubleshooting techniques taught in the class to assist problem solving Shaffer Equipment Mechanical Surface Type Equipment This course is designed to introduce and create knowledge and understanding of unit components, sequences, routine maintenance, and safety while testing and performing maintenance functions on Shaffer Surface type BOP s. Troubleshooting of the equipment is a critical area of focus. Individuals responsible for the and maintenance of the Shaffer surface type equipment toinclude land, jack-up and platform applications None Identify and understand the purpose of surface equipment Identify different Shaffer spherical, rams, and valves Repair and maintain Shaffer surface equipment 36 training.norway@ 37
Product Line Course Descriptions Electro Technical Product Line Open Enrollment Stavanger Understanding and anticipating your needs pushes us forward. With that in mind NOV Training Stavanger offers you open enrollment Product Line training. Each course is a standard course that covers the most common versions of equipment and systems on a rig. This enables our customers to send individual personnel to generic courses. Scheduled courses are sold on a per seat basis. They are open to enrollment for all customers and may include participants from various companies, disciplines and rigs. You can find our Rig Specific courses on page 29 38 training.norway@ 39
Product Line Product Line Electro Technical Equipment Matrix SVG 2020-1 Cyberbase & Drilling Equipment Electro Technical Course 10 s This course is designed to provide participants with valuable knowledge in troubleshooting and maintenance of the Cyberbase Control System. The equipment and the functions of the electrical system will be discussed and participants will learn to utilize the information gained to troubleshoot and assist s. Participants will work with troubleshooting scenarios in accordance with NOV documentation. They will also receive customized hands-on training on Cyberbase System PLC s, Drilling Flight Recorder (DFR), and in our unique ET Lab and Drilling Simulator. Senior Electronic Engineer (Electronics Section Leader), Electronic Engineer, Senior Electrician Engineer (Technical Section Leader), and Electrician Engineer (Assistant Technical Section Leader) Electrical or Electro Technical background Explain safety relevant to maintenance, troubleshooting and of the system Describe the system in general terms, its components and purpose Demonstrate basic navigation and administration of the system Perform troubleshooting and maintenance on the system SVG 2021-1 Cyberbase & Drilling Equipment Advanced Electro Technical Course This course is designed to provide participants with valuable training on Cyberbase System PLC s, Drilling Flight Recorder (DFR), in our unique ET Lab and Drilling Simulator. The majority of the course is advanced hands-on training needed to troubleshoot and maintain the Cyberbase Control System. The major components and the functions of the electrical system will be investigated and participants will solve troubleshooting scenarios in accordance with NOV documentation. Senior Electronic Engineer (Electronics Section Leader), Electronic Engineer, Senior Electrician Engineer (Technical Section Leader), and Electrician Engineer (Assistant Technical Section Leader) Prior to attending the course, each course participant should have at least one of the following: Completed SVG2020 or SVG2020-1 Cyberbase & Drilling Equipment Electro Technician Course Pass online pre-test 4 s Interpret NOV documentation and safety procedures Discuss the system, its equipment and purpose Identify navigation and administration of the system Solve troubleshooting scenarios using Cyberbase System PLC s, ServiceLab and Drilling Simulator Explain and demonstrate use of Drilling Flight Recorder in conjunction with DIAdem software for troubleshooting and generating reports *DCI MISC: Drilling Emergency Stop Drilling Power Limiting System Mud Pump Control System Trip Tank System (Pump & Valves) HMI (BOP, Vessel, Choke & Cement Unit Display) Alarms & Visualization SVG 2022-1 Drawworks Electro Technical Course (SSGD, AHD & AHDD) 5 s Participants will learn about the Drawworks design, main components, function and purpose. They will learn about the basic of the equipment, and understand how to maintain the electrical system of the equipment. They will attain practical understanding of the control system and basic troubleshooting. Personnel working with Drawworks None Explain safety relevant to maintenance, troubleshooting and of the equipment Describe the equipment in general terms, its components and purpose Demonstrate basic navigation and administration of the system Perform troubleshooting and maintenance on the equipment NOV 9020-1 Introducion to Siemens Step 7 PLC Course 5 s This course is designed for participants who require basic PLC knowledge and need an introduction to Siemens Step 7. It will familiarize users with the Siemens S7-300 PLCs and Siemens Step7 software. The participants will study general basics of PLC technology, Step7 setup, structure, addressing, hardware modules, remote I/O and project handling using the Cyberbase System Training Station. This course is designed for personnel working with Siemens PLC s None Describe basic PLC terminology and recognize the three programming languages associated with NOV PLC s: LAD, FBD and STL Explain Step7 PLC control system safety, features and design Distinguish between different features in Step7 Utilize Step7 structure Utilize Step7 addressing system Demonstrate use of analog signal modules in Step7 Demonstrate use of Remote I/O Demonstrate how to handle projects in Step7 Demonstrate their Steip7 PLC practical skills 40 training.norway@ 41
Product Line Course Descriptions Operators A deeper understanding of how to optimize and maintenance ensures a maximum return on investment. 42 training.norway@ 43
Product Line Product Line Operator Equipment Matrix NOR 5010-1 Cyberbase & Drilling Equipment Operator Course (AHD DW / TDX TD) 10 s This course is designed to provide participants with knowledge of Cyberbase, control and interaction of NOV drilling equipment and systems. Operation instructions and technical description of equipment will be discussed in detail with regards to the NOV manual. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. This course is one of two options, the equipment varies according to the equipment matrix. Drilling Section Leaders (Toolpushers), Drillers and Assistant Drillers Experience and practical understanding of the drilling process and of the specific drilling equipment 5 participants Explain main data, range of application and function of the equipment and systems Explain navigation of various HMI displays Outline technical specifications of equipment Explain how to utilize NOV user manuals Solve practical exercises in Drilling Simulator and on Cyberbase System Training Station NOR 5010-2 Cyberbase & Drilling Equipment Operator Course (SSGD DW / HPS TD) 10 s This course is designed to provide participants with knowledge of Cyberbase, control and interaction of NOV drilling equipment and systems. Operation instructions and technical description of equipment will be discussed in detail with regards to the NOV manual. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. This course is one of two options, the equipment varies according to the equipment matrix. Drilling Section Leaders (Toolpushers), Drillers and Assistant Drillers Experience and practical understanding of the drilling process and of the specific drilling equipment 5 participants Explain main data, range of application and function of the equipment and systems Explain navigation of various HMI displays Outline technical specifications of equipment Explain how to utilize NOV user manuals Solve practical exercises in Drilling Simulator and on Cyberbase System Training Station *DCI MISC: Drilling Emergency Stop Drilling Power Limiting System Mud Pump Control System Trip Tank System (Pump & Valves) HMI (BOP, Vessel, Choke & Cement Unit Display) Alarms & Visualization NOR 5011-1 Cyberbase & Drilling Equipment Performance Operator Course 4 s This course is designed to provide participants with skills on Cyberbase Control System and NOV drilling equipment. The majority of the course is hands-on training in our Drilling Simulator with focus on increased performance level for the drilling crew and solving troubleshooting scenarios. Drilling Section Leaders (Toolpushers), Drillers, Assistant Drillers, Roughnecks, Floor hands and Derrickman NOV Cyberbase & Drilling Equipment Operator course or experience 5 participants Explain setup of equipment and systems Outline technical specifications in troubleshooting situations Solve practical scenarios in Drilling Simulator and extensive troubleshooting NOR 5013-1 Cyberbase & Drilling Equipment Pipe Handling Course 5 s This course is designed to provide participants with valuable knowledge of the pipe handling functions of the Cyberbase Control System and NOV drilling equipment. Special focus will be on the pipe handling procedures and hands-on training in the simulator. The majority of the course is hands-on training, both on Cyberbase System Training Stations and in Drilling Simulator. Drilling Section Leaders (Toolpushers), Derrickman, Roughnecks and Assistant Drillers Understanding of drilling process 5 participants Explain range of application and function of the equipment & systems Explain navigation of various HMI displays Outline technical specifications of equipment Examine manual run and auto run in simulator Solve practical exercises & troubleshooting in Drilling Simulator and on hands-on equipment 44 training.norway@ 45
Product Line Product Line Course Descriptions Mechanical NOR 5019-1 Introduction to Cyberbase & Drilling Equipment Course 5 s This course is designed as an introduction to Cyberbase Operation and interaction of NOV drilling equipment and systems with some demonstrations and basic s in Drilling Simulator. OIM, Roughneck, Assistant Derrickman, Derrickman, ET, Mech. & Office personnel A practical understanding of the drilling process and of the specific drilling equipment 5 participants Explain basic functions of the equipment and systems Recognize navigation of various HMI displays Identify basic s shown in Drilling Simulator 46 training.norway@ 47
Product Line Product Line Mechanical Equipment Matrix SVG 2030-1 Drawworks (SSGD, AHD, AHDD) Mud Shaffer Equipment Mechanical Pump (14P-220) Mechanical Course 5 s Subsea Equipment 5 s This course is designed to give participants an understanding of the mechanical design, and maintenance of the equipment. We will provide practical training to participants on the Drilling Simulator, Drawworks Brake Caliper and Mud Pump components. Mechanical personnel Basic understanding of rig s Explain the equipment s intention, construction, and manner of Describe the auxiliary systems Explain the and safety systems of the equipment Demonstrate basic practical skills relevant to maintaining the system This course is designed to introduce and create knowledge and understanding of unit components, sequences, routine maintenance, and safety while testing and performing maintenance functions on Shaffer Subsea Equipment. Troubleshooting of the equipment is a critical area of focus. Toolpushers, Drillers, Assistant Drillers, Mechanics, Roughnecks, and Sub Sea Engineers None Identify the major components of the Shaffer Subsea equipment Use the user manuals to properly maintain and inspect the equipment Use the troubleshooting techniques taught in the class to assist problem solving Shaffer Equipment Mechanical Surface Type Equipment 3 s This course is designed to introduce and create knowledge and understanding of unit components, sequences, routine maintenance, and safety while testing and performing maintenance functions on Shaffer Surface type BOP s. Troubleshooting of the equipment is a critical area of focus. Individuals responsible for the and maintenance of the Shaffer surface type equipment to include land, jack-up and platform applications None Identify and understand the purpose of surface equipment Identify diferent Shaffer spherical, rams, and valves Repair and maintain Shaffer surface equipment 48 training.norway@ 49
Product Line All Personnel Training Facilities NOV Stavanger NOV s training facilities in Stavanger are located in Forus, the business section of Stavanger, midway between the airport and downtown Stavanger. We offer modern classrooms equipped with multiple projectors and equipment that enables us to give your employees in-depth training. We limit our classes to a maximum number of participants at a time, thus giving each participant more access to the instructor and the equipment for the training they need. Equipment and classrooms Stavanger NOV 9000-1 Introduction to Drilling Technology Course 2 s This course is designed for participants to gain basic knowledge about drilling rig organization, drilling related equipment, drilling processes and petroleum geology. All rig related personnel Drilling Simulator Greater Stavanger Area SVG Airport, Sola Lagerveien 20 Sandnes None Identify the various sorts of drilling installations Describe the basic purpose of the main equipment that is related to the drilling process Explain the purpose of the main components of the well control equipment Discuss consequences of equipment failure CyberMini ET Lab 50 NOV Stavanger Cyberbase System Training Station Cyberbase Workshop training.norway@ 51
National Oilwell Varco has produced this brochure for general information only, and it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein. All applications for the material described are at the user s risk and are the user s responsibility. Training Kristiansand Skibaasen 2 N-4636 Kristiansand Norway Training Stavanger Lagerveien 20 N-4069 Stavanger Norway Phone: +47 85 00 75 00 Phone: +47 85 00 75 00 2015 National Oilwell Varco All Rights Reserved D392006163-MKT-003 Rev 03 training.norway@