Omgeo Central Trade Manager SM A DTCC Thomson Reuters Company www.omgeo.com Installing and Configuring Two Java Runtime Environments This document describes how to install and configure two Java Runtime Environments (JREs) on a single machine. Doing so allows you to run the Omgeo Central Trade Manager SM (Omgeo CTM) trade blotter with the certified JRE and any other web applications with corresponding JRE requirements. As of this the date of this document, for 32 bit machines, Omgeo currently: Certifies JRE 8 update 25 and JRE 7 updates 45 or 51. Supports JRE 7 updates 11 or 21 and JRE 6 updates 12 or 29. Note The concepts and procedures described in this document do not constitute a security solution. It is incumbent upon your organization to determine how to use this document to meet your organizational security objectives. Requirements Before you begin the deployment of JRE 8 update 25 and JRE 7 update 51 on your system: Ensure that you address the certified hardware and software requirements in the Trade blotter (browser based user interface) section of the Omgeo CTM System Requirements. If you do not have local administrator rights on your machine, seek assistance from your organization s IT group to implement the dual JREs. If you do not have a local copy of the JRE 8 update 25 executable, Oracle requires a login to obtain a free version from the corporate web site (Step 3 in Download and install the latest certified JRE update). Downloading and installing the JRE This section assumes that you have the earlier JRE 7 update 51 on your machine. If you also have the latest certified JRE 8 update 25, skip this section and start with Validate both JRE installations on page 2.
Download and install the latest certified JRE update To download and install JRE 8 update 25: 1. Go to http://www.oracle.com and navigate to the JRE 8 update 25 download. 2. Install the JRE using the default installation settings or change the location to one that complies with your organizational policies. The default installation path is C:\Program Files\Java\jre8. Validate both JRE installations When you navigate to C:\Program Files\Java, ensure that your machine shows the two JRE installations. Figure 1 shows an example of both installations (assuming you have JRE 7 update 51 installed on your machine). Figure 1 Installation validation Configure JRE 8 update 25 for the trade blotter This section describes how to disable the earlier JRE 7 update 51 and validate that your system is using JRE 8 update 25. Disable the earlier JRE update To ensure that the trade blotter uses JRE 8 update 25: 1. Open the Control Panel. 2. Double click Java. The Java Control Panel appears. 3. Click the Java tab and then click View. Page 2 Omgeo Central Trade Manager
The User tab in the Java Runtime Versions panel shows both JREs enabled (Figure 2). Figure 2 JRE settings with both versions enabled 4. Clear the check box under Enabled on the 1.7.0_51 row to disable it. Your Java Runtime Versions panel should look like the one in Figure 3. Figure 3 JRE settings with update 25 enabled 5. Click OK, and then click OK again to close the Java Control Panel. Validate that your browser uses JRE 8 update 25 To verify that your browser uses JRE 8 update 25: 1. Go to http://www.java.com/en/download/installed.jsp. The Verify Java Version page appears. Figure 4 Verify the Java version Installing and Configuring Two Java Runtime Environments April 14, 2015 Page 3
2. Click Verify Java version. After 10 60 seconds, your browser should display a message similar to Figure 5. Figure 5 JRE 8 update 25 validation Running the Trade Blotter After you configure and validate JRE 8 update 25, log in to the trade blotter in the usual manner (http://www.omgeo.com/page/producturls). Configure the Earlier JRE for Other Activity To configure the earlier JRE for an application that requires an earlier version: 1. Open the Control Panel. 2. Double click Java. The Java Control Panel appears. 3. Click the Java tab. 4. Click View in the Java Runtime Environment Settings panel. 5. On the User tab, toggle the check boxes under Enabled to disable the 1.8.0_25 row and enable the 1.7.0_51 row. Your Java Runtime Versions panel should look like the one in Figure 6. Figure 6 JRE settings with the earlier version solely enabled 6. Click OK, and then click OK again to close the Java Control Panel. Changes in this version of the document In support of Release 2 (2015), this version increments the two JRE versions exemplified in the procedures. Page 4 Omgeo Central Trade Manager
Questions? Omgeo s Client Contact Center (CCC) provides general assistance and technical help. Visit www.omgeo.com/servicecentral to: Enter a service request or check the status of an existing service request Search our knowledge base Access our library of documentation Obtain contact information Copyright 2015 Omgeo LLC. All rights reserved. Omgeo and the Omgeo logo are registered service marks of Omgeo LLC. All names of Omgeo services appearing herein are either registered service marks or service marks of Omgeo LLC in the United States and elsewhere. The U.S. Securities and Exchange Commission regulates several Omgeo services. For more information, visit www.omgeo.com/regulation. Omgeo has approved this document for public distribution. The examples, pictures, and data are only for illustrative purposes. This document contains no actual trade data. Installing and Configuring Two Java Runtime Environments April 14, 2015 Page 5