Electronic imer - eries Micon 175 Compact 17.5mm Wide Integrated Dual Voltage Functions: ON Delay, tar Delta, One hot Wide ime ange: 0.3s - 30h LED Indications for Power and elay status Low Power Consumption Ordering Information 11OD4 12OD4 15OD4 11D4 12D4 11BD4 12BD4 15BD4 Description 110 VAC / 24 VAC/DC, ON Delay imer, 1 C/O 240 VAC / 24 VAC/DC, ON Delay imer, 1 C/O 12 VDC, ON Delay imer, 1 C/O 110 VAC / 24 VAC/DC, ignal OFF Delay imer, 1 C/O 240 VAC / 24 VAC/DC, ignal OFF Delay imer, 1 C/O 110 VAC / 24 VAC/DC, One hot imer, 1 C/O 240 VAC / 24 VAC/DC, One hot imer, 1 C/O 12 VDC, One hot imer, 1 C/O 18
Electronic imer - eries Micon 175 Parameters imer Description Mode Functional Diagram 12OD4 ON Delay imer ON Delay 12D4 ignal OFF Delay imer ignal OFF Delay upply Voltage ( ) 240 VAC / 24 VAC/DC 240 VAC / 24 VAC/DC upply Variation - 20% to +10% (of ) - 15% to +10% (of ) Frequency Power Consumption (Max.) 50/60 Hz 8 VA 50/60 Hz 8 VA iming anges 0.3s to 30h 0.3s to 30h eset ime 100 ms (Max.) 150 ms (Max.) etting Accuracy ± 5% of Full scale epeat Accuracy ± 1% elay Output 1 C/O Contact ating 5A @ 240 VAC / 28 VDC (esistive) 5A @ 240 VAC / 3A @ 30 VDC (esistive) Output 5 Electrical Life 1X10 6 Mechanical Life 5X10 Utilization Category AC - 15 ated Voltage (Ue): 120/240 V, ated Current (Ie): 3.0/1.5 A DC - 13 ated Voltage (Ue): 24/125/250 V, ated Current (Ie): 2.0/0.22/0.1 A Operating emperature torage emperature -10 C to +55 C -20 C to +70 C Humidity (Non Condensing) 95% (h) LED Indication Green LED Power ON, ed LED elay ON Enclosure Flame etardant UL94-V0 Dimension (W x H x D) (in mm) Weight (unpacked) Approx. Mounting 17.5 X 90 X 58.5 65 g Base / DIN ail Certification oh Compliant Degree of Protection IP 20 for erminals, IP 40 for Enclosure EMI / EMC Harmonic Current Emissions IEC 61000-3-2 ED IEC 61000-4-2 adiated usceptibility IEC 61000-4-3 Electrical Fast ransients IEC 61000-4-4 urges IEC 61000-4-5 Conducted usceptibility IEC 61000-4-6 Voltage Dips & Interruptions (AC) IEC 61000-4-11 Voltage Dips & Interruptions (DC) IEC 61000-4-29 Conducted Emission CIP 14-1 adiated Emission CIP 14-1 Environmental Cold Heat IEC 60068-2-1 Dry Heat IEC 60068-2-2 Vibration IEC 60068-2-6 epetitive hock IEC 60068-2-27 Non-epetitive hock IEC 60068-2-27 19
Electronic imer - eries Micon 175 Ordering Information 11D0 12D0 14D1 Description 110 VAC, tar Delta imer, 1 NO (tar) + 1 NO (Delta) 240 VAC, tar Delta imer, 1 NO (tar) + 1 NO (Delta) 240-415V AC, tar Delta imer, 1C/O (tar) + 1C/O (Delta), 3-30 ec. 20
Electronic imer - eries Micon 175 Parameters imer Description Mode Functional Diagram 12D0 tar Delta imer tar Delta P upply Voltage ( ) upply Variation Frequency Power Consumption (Max.) iming anges Pause ime eset ime etting Accuracy epeat Accuracy elay Output Contact ating Output Electrical Life Mechanical Life AC - 15 Utilization Category DC - 13 Operating emperature torage emperature Humidity (Non Condensing) LED Indication Enclosure Dimension (W x H x D) (in mm) Weight (unpacked) Mounting Certification Degree of Protection 240 VAC - 20% to +10% (of ) 50 Hz 8 VA 3s to 120s 60 ms 150 ms (Max.) ± 5% of Full scale ± 1% tar - 1 'NO', Delta - 1 'NO' 5A @ 240 VAC / 3A @ 30 VDC (esistive) 5 1X10 6 5X10 ated Voltage (Ue): 120/240 V, ated Current (Ie): 3.0/1.5 A ated Voltage (Ue): 24/125/250 V, ated Current (Ie): 2.0/0.22/0.1 A -10 C to +55 C -20 C to +70 C 95% (h) ed LED 1 ON, ed LED 2 ON Flame etardant UL94-V0 17.5 X 90 X 58.5 60 g Base / DIN ail oh Compliant IP 20 for erminals, IP 40 for Enclosure EMI / EMC Harmonic Current Emissions IEC 61000-3-2 ED IEC 61000-4-2 adiated usceptibility IEC 61000-4-3 Electrical Fast ransients IEC 61000-4-4 urges IEC 61000-4-5 Conducted usceptibility IEC 61000-4-6 Voltage Dips & Interruptions (AC) IEC 61000-4-11 Voltage Dips & Interruptions (DC) IEC 61000-4-29 Conducted Emission CIP 14-1 adiated Emission CIP 14-1 Environmental Cold Heat IEC 60068-2-1 Dry Heat IEC 60068-2-2 Vibration IEC 60068-2-6 epetitive hock IEC 60068-2-27 Non-epetitive hock IEC 60068-2-27 21
Electronic imer - eries Micon 175 Multi Function: 10 Different (Non ignal & ignal based) Modes Wide Voltage range for both AC & DC Wide ime range: 0.1s - 100h LED Indications for Power and elay status Independent settings for both ON ime & OFF ime Low Power Consumption Ordering Information 1CMD0 1CJD0 1CMDB 1CJDB Description 12-240 VAC/DC, Multi Function imer (10 Modes), 1 C/O (AL 7016 Casing) 12-240 VAC/DC, Asymmetric imer, 1 C/O(AL 7016 Casing) 12-240 VAC/DC, Multi Function imer (10 Modes), 1 C/O (AL 7035 Casing) 12-240 VAC/DC, Asymmetric imer, 1 C/O (AL 7035 Casing) 22
Electronic imer - eries Micon 175 Parameters imer Description Modes 1CJD0 Asymmetric imer 1) Asymmetric ON-OFF, 2) Asymmetric OFF-ON 1CMD0 Multi Function imer 1) ignal ON Delay 2) Cyclic ON/OFF 3) Cyclic OFF/ON 4) ignal OFF Delay 5) ignal OFF/ON 6) Accumulative Delay on ignal 7) Impulse ON/OFF 8) Leading Edge Impulse 9) railing Edge Impulse 10) Leading Edge Bi-stable Derived Modes upply Voltage ( ) upply Variation Frequency Power Consumption (Max.) iming ange eset ime etting Accuracy epeat Accuracy elay Output Contact ating Output Electrical Life Mechanical Life AC - 15 Utilization Category DC - 13 Operating emperature torage emperature LED Indication Enclosure Dimension (W x H x D) (in mm) Weight (unpacked) Mounting Certification Degree of Protection NA 12-240 VAC/DC -15% to +10% (of ) 50/60 Hz 2 VA 0.1s to 100h 200 ms (Max) -10 C to +60 C -15 C to +70 C Green LED Power ON, Amber LED elay ON Flame etardant UL94-V0 18 X 85 X 65 70 g DIN ail ON Delay, Interval ± 5% of Full scale ± 1% 1 C/O 1 C/O 8A @ 240 VAC / 5A @ 24 VDC (esistive) 8A @ 240 VAC / 5A @ 24 VDC (esistive) 5 1X10 6 5X10 ated Voltage (Ue): 120/240 V, ated Current (Ie): 3.0/1.5 A ated Voltage (Ue): 24/125/250 V, ated Current (Ie): 2.0/0.22/0.1 A oh Compliant IP 20 for erminals, IP 40 for Enclosure Green LED Power ON, Yellow LED elay ON EMI / EMC Harmonic Current Emissions IEC 61000-3-2 ED IEC 61000-4-2 adiated usceptibility IEC 61000-4-3 Electrical Fast ransients IEC 61000-4-4 urges IEC 61000-4-5 Conducted usceptibility IEC 61000-4-6 Voltage Dips & Interruptions (AC) IEC 61000-4-11 Voltage Dips & Interruptions (DC) IEC 61000-4-29 Conducted Emission CIP 14-1 adiated Emission CIP 14-1 Environmental Cold Heat IEC 60068-2-1 Dry Heat IEC 60068-2-2 Vibration IEC 60068-2-6 epetitive hock IEC 60068-2-27 Non-epetitive hock IEC 60068-2-27 23
Electronic imer - eries Micon 175 FUNCIONAL DIAGAM FO 1CMD0 : upply Voltage, : Input ignal, : elay Output : Preset ime, ON: Preset ON ime, OFF: Preset OFF ime IGNAL ON DELAY [stn] On application of input signal, the preset delay time period starts. On completion of the preset time, the output is switched ON and remains ON till the input signal is present. ACCUMULAIVE DELAY On IGNAL [san] On application of supply voltage, the t1 t2 preset delay time period starts. If input signal is applied during this period, the preset time stops and resumes only when +t1+t2 the input signal is removed. On completion of the preset time, the output is switched ON. CYCLIC ON/OFF [cnf] On application of supply voltage, the output is initially switched ON for the preset time duration () after which it is switched OFF ON OFF ON OFF for the same time duration (). his cycle continues till the power supply is present. IMPULE ON/OFF [inf] On application or removal of input signal to the timer, the output is immediately switched ON for the preset time duration (). If the state of the input signal is changed during the preset time, the output does not change state only the time is reset. CYCLIC OFF/ON [cfn] On application of supply voltage, the output is initially switched OFF for the preset time duration () after which it is switched ON for the same time duration (). his cycle continues till the power supply is present. OFF ON OFF ON LEADING EDGE IMPULE [il] When input signal is applied to the timer the output is immediately switched ON. he output remains ON for the preset time duration () after which it is switched OFF. If the input signal is removed during the preset time, the output is immediately switched OFF. IGNAL OFF DELAY [sf] On application of input signal to the timer, the output is immediately switched ON. When the input signal is switched OFF, the preset time delay period starts. On completion of the time period the output is switched OFF. AILING EDGE IMPULE [it] When the input signal to the timer is removed, the output is immediately switched ON for the preset time duration () after which it is switched OFF. If the input signal is applied during the preset time, the output is immediately switched OFF. IGNAL OFF/ON [sfn] On application of input signal to the timer, the preset delay time period () starts. On completion of the time preset time, the output is switched ON When the input signal is switched OFF, again the preset time delay period () starts. On completion of the time period the output is switched OFF. LEADING EDGE BIABLE [sbi] On application of input signal to the timer, the output is switched ON and remains ON even after the input signal is removed. On subsequent application of input signal, the output keeps on changing its state. DEIVED MODE elect mode, ignal ON Delay and short the connection between A1 - B1 before power ON elect mode, Accumulative Delay ON ignal and keep the connection between A1 - B1 open. FUNCIONAL DIAGAM FO 1CJD0 ON DELAY When supply power is applied to the timer, the preset delay time period starts. On completion of the preset time, the output is switched ON and remains ON till the input supply is present. AYMMEIC ON-OFF On application of supply voltage, the output is initially switched ON for the preset ON time duration () after which it is ON OFF ON switched OFF for the preset OFF time duration (). his cycle repeats and continues till the supply is present. he ON time & OFF time are set independently. elect mode, Leading Edge Impulse and short the connection between A1 & B1. INEVAL When supply power is applied to the timer, the output is instantly switched ON. On completion of the preset time, the output is switched OFF. AYMMEIC OFF-ON On application of supply voltage, the output is initially switched OFF for the preset OFF time duration () after which it OFF ON OFF is switched ON for the preset ON time duration (). his cycle repeats and continues till the supply is present. he ON time & OFF time are set independently. 24
Electronic imer - eries Micon 175 MOUNING DIMENION (mm) 76 49.5 18.0 65.0 60.0 65.0 45.0 85.0 85.0 65.0 45.0 18.0 VODD, VODDD, VODD1, VODDD1 49.5 1CMD0, 1CJD0, AICAE IME 17.5 (± 0.5) CONNECION DIAGAM A1 A1 A1 A1 90 100 C/C 24 VAC/DC A3 A2 12 VDC 110 VAC 240 VAC A3 A2 12-240 VAC/DC B1 24-240 VAC/DC A2 B1 A2 110D4, 120D4, 150D4, 11D0, 12D0, 11OD8, 12OD8, 11BD4, 12BD4, 15BD4 1CMD0, 1CMDB, 1CJDB VODD, VODDD, VODD1, VODDD1 Ø4 58.5 15 15 25 110D4, 120D4, 150D4, 11D0, 12D0 11OD8, 12OD8, 11BD4, 12BD4, 15BD4 18 MODE 'A' EMINAL OQUE & CAPACIY Ø 3.5 mm orque - 0.6 N.m (5.3 Lb.in) erminal screw - M2.5 2 olid Wire - 1 X 0.3...2.5 mm 16 110D4, 120D4, 150D4, 11D0, 12D0, 11OD8, 12OD8, 11BD4, 12BD4, 15BD4,1CMD0. 1CJD0, VODD, VODD1 18 28 VODDD, VODDD1, AICAE IME MODE 'B' 1CJD0 AWG 1 X 22 to 14 VODD, VODDD, VODD1, VODDD1 Ø 3.5...4.0 mm orque - 0.6 N.m (5.3 Lb.in) erminal screw - M3 2 olid Wire - 1 X 1...4 mm AWG 1 X 18 to 10 1CMD0, 1 CJD0, AICAE IME Ø 3.5...5.0 mm AWG orque - 1.6 N.m (5.3 Lb.in) erminal screw - M3.5 2 olid Wire - 2 X 0.2...2.5 mm 1 X 24 to 10 110D4, 120D4, 150D4, 11D0, 12D0 11OD8, 12OD8, 11BD4, 12BD4, 15BD4 3 Wire rising main without Loft illumination 4 Wire rising main without connection for Loft illumination 25 AICAE IME