O SICHS PIC PPICIONS Fully Customiseable to V ccording Pb (2/53/C) / ohs2 (2/65/U) Cost ffective asy Design For more than 2 years PIH has been manufacturing rotary switches for all types of applications. Costeffective and highly customiseable products with our huge experience in adapting them to customers needs when necessary. e have the best solution for all your rotary switching needs. Our products are widely used in utomotive, Consumer and ultimedia applications due to their excellent performace and quality/price ratio. ISO S649, ISO4, ISO 9, ead-free compliance and hundreds of satisfied customers are the best presentation card. Here we are presenting to you our otary Switches d on our P series. e strongly recommend you to visit www.piher.net for our S5 and -2 rotary switches and our full product range that includes Potentiometers, ncoders and Position Sensors. N SPCIFICIONS Power ating: 24V / 5m ON position resistance: 5 Insulation esistance: 3 mm otary Switch (d on P-) INII 5% +2º FIN FUS Carbon resistive element. IP54 protection according to IC 6529. Polyester substrate. lso upon request: iper positioned at 5% or fully clockwise Supplied in magazines for automatic insertion ong life model P-... (K cycles) Self extinguishable plastic (V94V) Cost-effective steel leads Pb-Free according to V 2/53/C / ohs 22/95/C SNDD CONFIUIONS S = Initial S = iper = Final S (otor at Final Position) NO: he information contained here should be used for reference purposes only. For further information please contact your nearest PIH supplier at www.piher.net www.piher.net --
SNDD CONFIUIONS 5 % 5 % echanical rotation angle: ±5º echanical rotation angle: 235º±5º D48 Switch code (Housing colour: green) 8 Switch code = Initial S = iper = Final S HO O OD SNDD OPION S P H CONUDO - 8 P- otors K (See note ) ounting ethod H H2.5 H5 H5 H2 H2.5P H H5P V V V VP V3 VJ Switch code 8 D48 (see graphs) ife = ong life (See note 3) See P's (See note 4) Shaft/hum. = Fig. 2 = Fig. 2 7 = Fig. 7 Flammability I = Non flammable Shaft/rotor colour O = ed N = Black V = reen = ellow = Blue = Brown = rey N = Orange C = Cream (See note 6) iper position P = 5% (See note 7) erminals NOS: () "" adjustment only available on "H" versions. otor "" only available in purple (shaft/rotor colour "VI"). (2) erminals styles: "P" & "J" are crimped terminals. V=Vertical adjust; H=Horizontal djust (3) ife 8... 5 cycles D48... Standard: 5 cycles; ong ife: K cycles (4) s: not available with the H, V5 and V3 models, nor with adjustment types,,,. s also not available with D48 switch code H versions. (5) Non flammable: housing, rotor and shaft. (6) Colour shaft/rotor: Potentiometer without shaft: only rotor Potentiometer with shaft: only shaft Cream colour only available in standard plastic. (7) P not available for D48 Please see P- datasheet for further information NO: he information contained here should be used for reference purposes only. www.piher.net -2-
mm otary Switch (d on PC-) INII 5% +2º FIN FUS Cermet resistive element. IP54 protection according to IC 6529. Plastic according to U94V- lumina substrate. lso upon request: iper positioned at 5% or fully clockwise. Supplied in magazines for automatic insertion. ong life model for low cost control pot. applications Customisation according to customer s needs. echanical detents Cost-effective steel leads Pb-Free according to V 2/53/C / ohs 22/95/C SNDD CONFIUION 5 % echanical rotation angle: 235º±5º HO O OD SNDD OPION S PC- H - ---- PC- otors K (See note ) ounting ethod H H2.5 H5 H5 H2 H2.5P H H5P V5 V5 V V V VP V3 VJ ife = ong life See P`s (See note 3) (See note 4) Shaft /hum. = Fig. 2 = Fig. 2 7 = Fig. 7 Shaft / rotor colour O= ed N= Black V= reen = ellow = Blue = Brown = rey N= Orange iper position P = 5% erminals NOS: () "" adjustment only available on "H" versions. otor "" only available in purple (shaft/rotor colour "VI"). (2) erminal styles: "P" & "J" are crimped terminals. V=Vertical adjust; H=Horizontal djust (3) ife Standard cycles ong life K cycles (4) s: not available with the H, V5 and V3 models, nor with adjustment types,,,. Non flammable: housing, rotor and shaft. (5) Colour shaft/rotor: Potentiometer without shaft: only rotor Potentiometer with shaft: only shaft Please see PC- datasheet for further information NO: he information contained here should be used for reference purposes only.
5mm otary Switch (d on PC-5) INII 5% +2º FIN FUS Cermet resistive element. IP54 protection according to IC 6529. Plastic according to U94V- lumina substrate. lso upon request: iper positioned at 5% or fully clockwise. Supplied in magazines for automatic insertion. ong life model for low cost control pot. applications Customisation according to customer s needs. echanical detents Cost-effective steel leads Pb-Free according to V 2/53/C / ohs 22/95/C SNDD CONFIUION 5 %... 265º±5º HO O OD SNDD PC-5 H - ---- OPION S PC-5 otors F N (See note ) ounting ethod H H2.5 H5 H5 H5 H5 H6 B H2 H2.5P H H5P V2 V2.5 V2 V V5 V5 V7 V7.5 V8 D V2 V2.5P V22 VP V23 V5P ong ife = ong life (See note 3) See P's Shaft hum. Fig. 28 Fig. 28 Shaft/rotor colour O= ed N= Black V= reen = ellow = Blue = Brown = rey N= Orange (See note 4) iper position P = 5% orque = Standard = ow (See note 6) erminals NOS: () "" adjustment only available on "H" versions. Standard colour for the rotor: Orange (2) erminals styles: "P" are crimped terminals. V=Vertical adjust; H=Horizontal djust (3) ife Standard cycles ong life K cycles (4) Colour shaft/rotor: Potentiometer without shaft: only rotor Potentiometer with shaft: only shaft (5) ow torque:.5ncm. No detent option available for low torque models. (6) s (35 pcs/mag): available for V (2.5), V (2.5), V (2.5P), V (5), V5 (P) and H models. For more information please contact your nearest Piher supplier. Please see PC-5 datasheet for further information NO: he information contained here should be used for reference purposes only.
Disclaimer he product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls S.., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Piher ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. he product specifications do not expand or otherwise modify Piher s terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. he products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Information contained in and/or attached to this catalogue may be subject to export control regulations of the uropean Community, US, or other countries. ach recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher International Corp. xports, Note: ll products / technologies are 99 Classified commodities. xports from the United States are in accordance with the xport dministration egulations. Diversion contrary to US law is prohibited. ISO 4 BUU VIS Certification to V ccording Pb (2/53/C) / ohs2 (2/65/U) ll Piher products can be adapted to meet customer s requirements. Please always use the latest updated datasheets published at our website www.piher.net v836 www.piher.net