WIRING PIPES AND ACCESSORIES

WIRING PIPES AND ACCESSORIES

2 WIRING PIPES Wiring s and accessories The s and accessories are made in compliance with ČSN EN 6186-1 ed. 2, specifications and approved documentation. The PVC s and accessories passed the test of resistance against spread of flame in compliance with ČSN EN 6186-1 ed. 2. According to ČSN 212 ed. 2, its use is possible in materials with fire reaction class A1 - F in accordance with ČSN EN 1501-1. Polyethylene s of type LPE 1 and LPE 2 with low and very low mechanical resistance can be used only for installing on/into class A1 non-inflammable materials. The s are intended for installation to the distribution of low voltage. Manufacturer reccommends the assembling of plastic s at the temperature over 0 C. The ČSN 64 0090 standard is applicable for storage. It is possible to install flexible and tough necked s with accessories on premises where there is danger of explosions of flammable gases and vapours (zone 2) or danger of explosions of flammable dust (zone 22); the wiring must be performed according to ČSN EN 60 079-14. Flexible s.............. -4 Rigid socket s.................. -14 Cable protection KOPOFLEX and KOPODUR............ -22 Sectional protection KOPOHALF... -25 Earthen channel KOPOKAN... -26 Optical cable protectors - HDPE.......... -27 Steel s............ -0 Aluminium s... -9 Flexible metal... -41 Drainage KOPODREN... -42 Tube length tolerance - rigid: ± 10 mm Protective tube length tolerance - KOPOFLEX: ± 0,5 m - flexible: ± 1 % - KOPODUR: ± 1 % - HDPE: ± 2 mm/m - KOPOHALF ± 10 mm - KOPOKAN ± 10 mm Icons - legend material color temperature resistance, scope of application ( C) thread fire reaction class of underlying material wall thickness self-snuffing minimum bending radius (mm) P mechanical resistance / load limit value (N) limit of compression strength (kpa) sheet metal thickness mechanical protection classification code according to ČSN EN 6186-1 package (m; pcs) classification code according to ČSN EN 6186-25 accessories, additional assortment area with a risk of explosion dn outside diameter level of protection - IP classification di minimal inner diameter functionality during a fire R bending radius halogen-free material L length UV stable

WIRING PIPES Classification codes for the declared properties of the piping system according to ČSN EN 6186-1 edition 2 The code classifies the conduits and their accessories according to compressive strength, impact strength, minimum and maximum admissible installation temperature. first digit second digit third digit fourth digit fifth digit compressive strength impact strength Pipes: KOPOS TYP 1516E - 156 EN 2241 (20 N) PVC KOPOS TYP 4016E - 406 EN 41 (750 N) PVC KOPOS TYP 8016E - 806 EN 4441 (1250 N) PVC lowest admissible temperature highest admissible temperature resistance to bending 1 very low 125 N 1 very low 0,5 J 1 + 5 C 1 + 60 C 1 lead 2 low 20 N 2 low 1 J 2-5 C 2 + 90 C 2 flexible medium 750 N medium 2 J - 15 C +105 C flexible/elastic 4 high 1250 N 4 high 6 J 4-25 C 4 +120 C 4 flexible 5 very high 4000 N 5 very high 20,4 J 5-45 C 5 +150 C 6 +250 C 7 +400 C Classification codes for the declared properties of the fixing equipment according to ČSN EN 6186-25 Classification codes for the declared properties of the piping system fixing equipment. first digit second digit third digit fourth digit fifth digit sixth digit seventh digit resistance to lateral load impact resistance range of low temperatures range of high temperatures corrosion resistance flame spread resistance resistance to axial load 2 low lateral load medium lateral load 4 high lateral load 1 very low impact strength 2 low impact strength medium impact strength 4 high impact strength 5 very high impact strength 1 +5 C 2-5 C -15 C 4-25 C 5-45 C 0 +40 C 1 +60 C 2 +90 C +105 C 4 +120 C 5 +150 C 6 +250 C 7 +400 C 1 low protection inside and outside 2 medium protection inside and outside medium protection inside, high protection outside 4 high protection inside and outside 1 flame retardant 2 spreading flame 0 not specified 1 specified by the producer All s and accessories (except for Weicon) are in compliance with EU directives. Flexible s of types 14.. and 12.. and rigid s of types 15.., 40.., 80.., 15.. HF, 40.. HF including elbows and couplings are in compliance with German electrical Standard.

4 WIRING PIPES LPFLEX - very low mechanical resistance PVC -5 - +60 C A1 - F 0 sec. 125 N/5 cm 11212 For installation into or under the parget. Suitable for mounting into plaster walls and ceilings. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). EN ČSN description 216E 220 225 H100 - dn di min. L mm mm m m pg. 100 7200 8595057615991 H100D with wire 100 min. 7200 8595057619180 16 10,7 H50-50 5400 859505765117 H50D with wire 50 min. 5400 859505765126 H100-100 4000 8595057616004 H100D with wire 100 min. 4000 8595057619197 H25-20 14,1 25 min. 900 859556890521 H50 - grey-white 50 4500 8595057651180 H50D with wire 50 min. 4500 8595057651 H50-50 000 8595057616011 25 18, H50D with wire 50 min. 000 859505761920 22 H50-50 1600 8595057616028 2 24, H50D with wire 50 min. 1600 8595057619210 240 H25-40 1,2 25 1000 8595057619692 250 H25-50 9,6 25 800 8595057619708 21 H100-100 4000 859505760017 18,7 1,5 H50-50 600 859505760024 H100-100 600 85950576001 216 21,2 16,0 H50-50 000 859505760048 grey-white H100-100 2800 859505760055 22 28,5 22,9 H50-50 2100 859505761566 229 H50-4,5 28,4 50 2000 859505760079 26 H50-42,2 5,9 50 1000 859505760086-16 - -18-6 material fire reaction class of underlying material mechanical resistance area with a risk of explosion package temperature resistance self-snuffing classification code according to 6186-1 color accessories

WIRING PIPES 5 MONOFLEX - low mechanical resistance PVC -5 - +60 C A1 - F 0 sec. 20 N/5 cm 22212 For surface installation, into or under parget. Suitable for mounting into hollow walls, plaster walls and ceilings. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). EN ČSN description 1416E 1420 1425 142 1440 1450 141/1 K100 - F50 - dn di min. L mm mm m m pg. 50 5400 8595568909664 H50 - white 50 5400 8595057665842 K10-10 10 8595568924940 16 10,7 K100-100 7200 8595568910080 light grey K50-50 5400 859505761605 K50D with wire 50 5400 859505761975 F50-50 4500 8595568909671 H50 - white 50 4500 8595057665859 K10-10 10 8595568924957 K100-20 14,1 100 4000 8595568910097 K25 - light grey 25 900 8595057697461 K50-50 4500 8595057616042 K50D with wire 50 4500 8595057619760 F50-50 000 8595568909695 H50 - white 50 000 8595057665866 K10-10 10 8595568927019 K100-25 18, 100 200 859556891010 K25 - light grey 25 min. 2250 8595057699298 K50-50 000 8595057616059 K50D with wire 50 000 8595057619777 F50-50 1600 8595568909718 H50 - white 50 1600 859505766587 K10-10 10 8595568927026 2 24, K25-25 1500 859505769904 light grey K25D with wire 25 1500 8595057619784 K50-50 1600 8595057616066 F50-50 1000 8595568909725 H25 - white 25 1000 859505769579 40 1,2 K25-25 1000 8595057619715 light grey K25D with wire 25 1000 8595057621510 F25-25 min. 800 859556890972 50 9,6 K25 - light grey 25 800 8595057619722 18,7 1,5 100 4000 8595057600416 1416/1 K100-21,2 16,0 100 600 859505760042 142/1 K100 - light grey 28,5 22,9 100 2800 859505760040 1429/1 K50-4,5 28,4 50 2000 8595057600447 146/1 K50-42,2 5,9 50 1000 8595057600454-16 - -18-6 material fire reaction class of underlying material mechanical resistance area with a risk of explosion package temperature resistance self-snuffing classification code according to 6186-1 color accessories

6 WIRING PIPES SUPER MONOFLEX - medium mechanical resistance PVC -5 - +60 C A1 - F 0 sec. 750 N/5 cm 212 For surface installation, into or under parget. Suitable for mounting into hollow walls, plaster walls and ceilings. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). EN description 1216E 1220 1225 122 di dn L min. mm mm m m pg. L50-50 5400 8595057612914 16 10,7 L50D with wire 50 5400 8595057619814 L100-100 4000 8595568910066 L100D with wire 100 4000 859505768781 20 14,1 L50-50 4500 8595057612921 L50D with wire 50 4500 8595057619821 L50 - dark grey 50 000 859505761298 25 18, L50D with wire 50 000 859505761988 L25-25 1500 8595057612945 2 24, L25D with wire 25 1500 8595057619845 L25-25 1000 8595057612952 1240 40 1,2 L25D with wire 25 1000 85950576975 1250 L25-50 9,6 25 800 8595057612969-16 - -18 Clamps for flexible s ČSN PVC -5 - +60 C A1 - F 0 sec. 2441410 The clamps are equipped with fastening elements for placing next to each other to create continual row thereof as well as with grooves for installation in supporting trunkings of 5820/..series (see pg. 2-65). To install, push the between the clamp jaws. ČSN di H mm mm pcs 51 LB 19,4 0 10; 720 859505760554 516 LB 21,5 2 10; 1200 859505760561 grey 521 LB 27, 7 10; 1050 859505760578 529 LB 5,8 42 10; 660 859505760585 material fire reaction class of underlying material mechanical resistance classification code according to 6186-25 color accessories temperature resistance self-snuffing classification code according to 6186-1 area with a risk of explosion package

WIRING PIPES 7 MONOFLEX PP - low mechanical resistance PP -15 - +90 C A1 - F 0 sec. 20 N/5 cm 2222 For surface installation, into or under parget. Suitable for mounting into hollow walls, plaster walls and ceilings. Flexible self-extinguishing made from PP with low content of halogen elements. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). EN description 1416EPP 1420PP 1425PP dn di min. L mm mm m m pg. F100-100 5400 8595057621749 16 10,7 F100D with wire 100 5400 8595568919908 F100-100 4800 8595057621756 20 14,1 F100D with wire 100 4800 8595568919915 F50-50 000 859505762176 25 18,2 F50D with wire 50 000 8595568919922 142PP F50-50 1800 8595057621770 2 24,2 F50D with wire 50 1800 859556891999 1440PP F25-40 2,4 25 800 8595057621787 1450PP F25-50 41,2 25 700 8595057621794-20 - -21 SUPER MONOFLEX HFPP - medium mechanical resistance PP -25 - +105 C A1 - F 0 sec. 750 N/5 cm 42 Flexible halogen-free self-extinguishing made from PP. For installation on the surface, in plaster, under plaster or into concrete. Suitable for mounting into hollow walls, plaster walls and ceilings. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). Halogen-free s are used on premises where the safety of people and property is primary, e.g.: public buildings, hospitals, schools, theatres, airport halls, shopping centres, etc. EN description dn di min. L mm mm m m pg. 1216EHFPP L100 - grey 16 10,7 100 6600 8595057621800 1220HFPP 1225HFPP 122HFPP 1240HFPP 1250HFPP K100-100 6000 859556890552 light grey K100D with wire 20 14,1 100 6000 859556890514 L100-100 6000 8595057621817 L100 - grey 100 600 8595057621824 25 18,2 L100D with wire 100 600 8595057699090 K50-50 1800 859556890569 light grey K50D with wire 2 24,2 50 1800 859556890576 L50-50 1800 859505762181 L25-25 1075 859505769959 40 2,4 L50 - grey 50 1600 8595057621848 L25-25 800 8595057621855 50 41,2 L50-50 800 8595057697881-20 - -21 material fire reaction class of underlying material mechanical resistance area with a risk of explosion color accessories temperature resistance self-snuffing classification code according to 6186-1 halogen-free material package

8 WIRING PIPES APAFS, APACS - low mechanical resistance PA stable mounting: -40- +120 C A1 - F 0 sec. 20 N/5 cm flexible mounting: -5 - +120 C 242440 * Flexible UV stable halogenless self-extinguishing made from PA 6. Halogen-free s are used on premises where the safety of people and property is primary, e.g.: public buildings, hospitals, schools, theatres, airport halls, shopping centres, etc. * electrical properties - undeclared EN dn di min. L mm mm m APAFS16 F50 15,8 11,8 50 859505765621 APAFS21 F50 21,2 16,5 50 8595057662179 APAFS28 F50 28,5 22,6 50 8595057667266 APAFS4 F50 4,5 28,8 50 8595057658196 APACS42 F25 42,5 5,2 25 859505766727 APACS54 F25 54,5 46,5 25 8595057651517 APACS80 F10 79, 67, 10 8595057667280 Accessories for flexible s APAFS / APACS Adaptalok is a system of utilities allowing to terminate and fix the. Utilities allow 45 and 90 tapping and direct threaded termination - M16 - M50 or PG1,5 - PG48. The termination is available as for flange as well. Installation and removal is easy and quick. Utilities are equipped with removal part allowing to remove the termination easily and without breaking. Adaptalok is tested in compliance with ČSN EN 6186-24. There is possible to assemble it into the space of dangerous area 2 at the environment of hazard explosion and inflammable gases and vapors. Sales from 1 pc. Combination of utilities is driven by outside diameter of used. PA stable mounting: -50- +120 C 0 sec. IP66 flexible mounting: -45 - +120 C Adaptalok direct flange Adaptalok 90 flange Adaptalok 45 flange Adaptalok termination dn mm 16 A16FL 8595057625495 A16FL-90 8595057625464 A16FL-45 8595057625525 A-ES16 8595057625815 20 A-ES20 8595057625822 21 A21FL 8595057625501 A21FL-90 8595057625471 A21FL-45 859505762552 28 A28FL 8595057625518 A28FL-90 8595057625488 A28FL-45 8595057625549 A-ES28 859505762589 2 A-ES2 8595057625846 40 A-ES40 859505762585 80 A80FL-90 8595057667297 material fire reaction class of underlying material mechanical resistance IP protection UV stable accessories temperature resistance self-snuffing area with a risk of explosion halogen-free material color

WIRING PIPES 9 EN Adaptalok direct Adaptalok 90 Adaptalok 45 dn mm 16 M16x1,5 AM16/16 8595057626676 AM16/16-90 8595057625228 AM16/16-45 859505762541 20 M20x1,5 AM20/20 85950576261 21 M20x1,5 AM21/20 859505762668 AM21/20-90 859505762525 AM21/20-45 859505762558 25 M25x1,5 AM25/25 8595057626140 28 M25x1,5 AM28/25 8595057626690 AM28/25-90 8595057625242 AM28/25-45 859505762565 4 M2x1,5 AM4/2 8595057626706 AM4/2-90 8595057625259 AM4/2-45 859505762572 42 M40x1,5 AM42/40 859505762671 AM42/40-90 8595057625266 AM42/40-45 859505762589 54 M50x1,5 AM54/50 8595057625150 AM54/50-90 859505762527 AM54/50-45 859505762596 ČSN 16 PG1,5 APG16/1 8595057625167 APG16/1-90 8595057625280 APG16/1-45 8595057625402 21 PG16 APG21/16 8595057625174 APG21/16-90 8595057625297 APG21/16-45 8595057625419 28 PG21 APG28/21 8595057625181 APG28/21-90 85950576250 APG28/21-45 8595057625426 4 PG29 APG4/29 8595057625198 APG4/29-90 859505762510 APG4/29-45 85950576254 42 PG6 APG42/6 8595057625204 APG42/6-90 859505762527 APG42/6-45 8595057625440 54 PG48 APG54/48 8595057625211 APG54/48-90 85950576254 APG54/48-45 8595057625457 EN Adaptalok washer Adaptalok nut Dismounting part dn mm 16 M16x1,5 A-SW/M16 8595057625686 A16RT 8595057625556 21 M20x1,5 A-SW/M20 859505762569 A21RT 859505762556 28 M25x1,5 A-SW/M25 8595057625709 The nut is a part of the AM adapt-lock A28RT 8595057625570 4 M2x1,5 A-SW/M2 8595057625716 package... A4RT 8595057625587 42 M40x1,5 A-SW/M40 859505762572 A42RT 8595057625594 54 M50x1,5 A-SW/M50 859505762570 A54RT 8595057625600 ČSN 16 PG1,5 A-SW/PG1 8595057625747 A-LN/PG1 8595057625624 A16RT 8595057625556 21 PG16 A-SW/PG16 8595057625754 A-LN/PG16 859505762561 A21RT 859505762556 28 PG21 A-SW/PG21 8595057625761 A-LN/PG21 8595057625648 A28RT 8595057625570 4 PG29 A-SW/PG29 8595057625778 A-LN/PG29 8595057625655 A4RT 8595057625587 42 PG6 A-SW/PG6 8595057625785 A-LN/PG6 8595057625662 A42RT 8595057625594 54 PG48 A-SW/PG48 8595057625792 A-LN/PG48 8595057625679 A54RT 8595057625600 halogen-free material thread UV stable

10 WIRING PIPES LPE-1 - low mechanical resistance PE -25 - +90 C A1 20 N/5 cm 2242 Suitable for direct monolithic concreting or under the parget. EN ČSN description dn di min. L mm mm m m pg. 216E/LPE-1 A100-100 7200 8595057651197 16 10,7 A100D with wire 100 min. 7200 859505765120 220/LPE-1 A100-100 4000 859505765124 20 14,1 A100D with wire 100 min. 4000 8595057651241 A100-100 200 8595057651272-20 orange - 225/LPE-1 A100D with wire 25 18, 100 200 8595057651289-21 A50-50 min. 000 8595568905406 22/LPE-1 A50-50 1600 859505765780 2 24, A50D with wire 50 1600 859505766884 240/LPE-1 A25-40 1,2 25 1000 8595057688452 216/LPE-1 H100-21,2 16,0 100 600 859505760707 22/LPE-1 H100 - white 28,5 22,9 100 2800 859505760714-10 229/LPE-1 H50-4,5 28,4 50 2000 859505760721 material temperature resistance classification code according to 6186-1 color accessories fire reaction class of underlying material mechanical resistance halogen-free material package

WIRING PIPES 11 LPE-2 - very low mechanical resistance PE -25 - +90 C A1 125 N/5 cm 1142 Suitable for installing into prefabricated concrete elements. EN ČSN description dn di min. L mm mm m m pg. 216E/LPE-2 A100-100 7200 8595057651210 orange A100D with wire 100 min. 7200 8595057651227 16 10,7 F100-100 min. 7200 8595568910127 F100D with wire 100 min. 7200 8595568910172 220/LPE-2 A100-100 4000 8595057651258 orange A100D with wire 100 min. 4000 8595057651265 20 14,1 F100-100 min. 4000 859556891014 F100D with wire 100 min. 4000 8595568910189 225/LPE-2 A100-100 200 8595057651296-20 orange - A100D with wire 100 200 859505765102 25 18, -21 F100-100 min. 200 8595568910141 F100D with wire 100 min. 200 8595568910196 22/LPE-2 A50-50 1600 859505765797 orange A50D with wire 50 min. 1600 8595057668850 2 24, F50-50 min. 1600 8595568910158 F50D with wire 50 min. 1600 8595568910202 240/LPE-2 A25 - orange 25 1000 8595057688469 40 1,2 F25-25 min. 1000 8595568910165 A100 - orange 100 4000 8595057614857 21/LPE-2 F100-18,7 1,5 100 min. 4000 8595568910219 H100 - white 100 4000 859505760646 216/LPE-2 22/LPE-2 A100 - orange 100 min. 600 8595057614864 F100-21,2 16,0 100 min. 600 8595568910226 H100 - white 100 600 85950576065 A100 - orange 100 min. 2800 8595057614871 F100-28,5 22,9 100 min. 2800 85955689102 H100 - white 100 2800 859505760660 A50 - orange 50 min. 4800 8595057614888 229/LPE-2 H50 - white 4,5 28,4 50 2000 859505760677 F50-50 min. 4800 8595568910240 26/LPE-2 H50 - white 42,2 5,9 50 1000 859505760684-10 material temperature resistance classification code according to 6186-1 color accessories fire reaction class of underlying material mechanical resistance halogen-free material package

12 WIRING PIPES LPE-1 - UV stable, low mechanical resistance PE -25 - +90 C A1 20 N/5 cm 2242 Flexible UV stable to be suitable for outside installations. EN description 220/LPE-1 225/LPE-1 22/LPE-1 dn di min. L mm mm m m pg. F1.DU with wire 100 4000 8595568902498 20 14,1 F1.U - 100 4000 8595568902481 F1.DU with wire 100 200 859505769966 25 18, F1.U - 100 200 8595568902504 F50DU with wire 50 1600 859556890257 2 24, F50U - 50 1600 8595568902566-20 - -21 LPE-2 - UV stable, very low mechanical resistance PE -25 - +90 C A1 125 N/5 cm 1142 Flexible UV stable to be suitable for outside installations. EN description 220/LPE-2 225/LPE-2 22/LPE-2 dn di min. L mm mm m m pg. F1.DU with wire 100 4000 859556890255 20 14,1 F1.U - 100 4000 8595568902528 F1.DU with wire 100 min. 200 8595568902559 25 18, F1.U - 100 200 8595568902542 F50DU with wire 50 1600 8595057699212 2 24, F50U - 50 1600 8595568902580-20 - -21 material fire reaction class of underlying material classification code according to 6186-1 UV stable package temperature resistance mechanical resistance halogen-free material color accessories

WIRING PIPES 1 SPIROFLEX - low mechanical resistance PVC -5 - +60 C A1 - F 0 sec. 20 N/5 cm 2114 Flexible protective reinforced with hard PVC spiral. Excels in smooth inside surface and very good strength, while the flexibility is guaranteed. Suitable for systems with mechanical strain and constant pressure, e.g.: industrial systems and machine equipment. dn di min. L mm mm m m SF16 K0 20,7 16 0 1440 8595057625891 SF20 K0 25,0 20 0 1080 8595057625907 light grey SF25 K0 0,6 25 0 480 8595057625914 SF2 K0 8,0 2 0 420 8595057625921 Conduit bushing SPIROFLEX PVC -5 - +60 C A1 - F 0 sec. IP64 For the type di of mm mm pcs SFM20 KB 16 SF16 M20x1,5 25 859505762598 SFM25 KB 20 SF20 M25x1,5 25 8595057625945 light grey SFM2 KB 25 SF25 M2x1,5 10 8595057625952 SFM40 KB 2 SF2 M40x1,5 10 8595057625969 material fire reaction class of underlying material mechanical resistance IP protection package temperature resistance self-snuffing classification code according to 6186-1 color accessories

14 WIRING PIPES Rigid wiring s - low mechanical resistance PVC -25 - +60 C A1 - F 0 sec. 20 N/5 cm 22411 IK06 Rigid socket s are fireproof-tested. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). EN 1516E 1520 1525 152 1540 1550 156 dn di min. L mm mm m m pg. HA white 0; 000 8595057619067 KA 16 1,7 0; 000 8595057617209 light grey KC 2 20; 2000 8595057617216 HA white 0; 1890 8595057619074 KA 20 17,4 0; 1890 8595057616905 light grey KC 2 20; 1260 859505761867 HA white 0; 1260 8595057619081 KA 25 22,1 0; 1260 8595057616912 light grey KC 2 20; 840 8595057616882 HA white 0; 750 8595057619098 KA 2 28,6 0; 750 8595057616929 light grey KC 2 20; 500 8595057616875 HA white 0; 480 8595057619104 KA 40 6,6 0; 480 859505761696 light grey KC 2 20; 20 859505761694 HA white 0; 270 8595057619111 KA 50 45,9 0; 270 8595057617704 light grey KC 2 20; 180 8595057644946 HA white 15; 240 85950576577 6 58,4 KA light grey 15; 240 859505762617-16 - -18 material fire reaction class of underlying material mechanical resistance area with a risk of explosion color accessories temperature resistance self-snuffing classification code according to 6186-1 mechanical protection package

WIRING PIPES 15 Rigid wiring s - medium mechanical resistance PVC -25 - +60 C A1 - F 0 sec. 750 N/5 cm 411 IK07 Rigid socket s are fireproof-tested. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). Length of 2 m, until stocks are exhausted. EN 4016E 4020 4025 402 4040 4050 406 dn di min. L mm mm m m pg. KA 0; 000 8595057689602 light grey KC 2 20; 2000 859556890822 16 1,0 LA 0; 000 859505761722 dark grey LC 2 20; 2000 859505761720 KA 0; 1890 8595057689954 light grey KC 2 20; 1260 859556890655 20 16,9 LA 0; 1890 8595057617018 dark grey LC 2 20; 1260 8595057616899 KA 0; 1260 859505768990 light grey KC 2 20; 840 8595568902955 25 21,4 LA 0; 1260 8595057616981 dark grey LC 2 20; 840 8595057616950 KA 0; 750 8595057690011 light grey KC 2 20; 500 8595568902962 2 28,0 LA 0; 750 8595057617001 dark grey LC 2 20; 500 8595057616967 KA 0; 480 8595057689961 light grey KC 2 20; 20 8595568902979 40 5,8 LA 0; 480 8595057616998 dark grey LC 2 20; 20 8595057616974 KA 0; 270 859505769094 light grey KC 50 45,0 2 20; 180 8595568902986 LA dark grey 0; 270 8595057617728 KA 15; 240 8595057696402 light grey KC 6 57,4 2 10; 160 859556890299 LA dark grey 15; 240 859505762624-16 - -18 material fire reaction class of underlying material mechanical resistance area with a risk of explosion color accessories temperature resistance self-snuffing classification code according to 6186-1 mechanical protection package

16 WIRING PIPES Rigid wiring s - high mechanical resistance PVC -25 - +60 C A1 - F 0 sec. 1250 N/5 cm 44411 IK09 Rigid socket s are fireproof-tested. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). Length of 2 m, until stocks are exhausted. EN 8016E 8020 8025 802 dn di min. L mm mm m m pg. FA 0; 000 8595057617247 16 12,2 FC 2 20; 2000 8595057617254 FA 0; 1890 8595057617087 20 15,8 FC 2 20; 1260 8595057617025 FA 0; 1260 8595057617070 25 20,6 FC 2 20; 840 859505761702 FA 0; 750 859505761706 2 27,0 FC 2 20; 500 8595057617100 8040 FA 0; 480 8595057617056 40 5,0 FC 2 20; 20 8595057617049 8050 FA 50 44,1 0; 270 8595057617711 806 FA 6 55,4 15; 240 85950576261-16 - -18 Elbows for EN s PVC -25 - +60 C A1 - F 0 sec. IK09 The elbows with double-sided necks are intended for 90 bends. Bending radius ensures smooth transition and allows easy retraction of wires and cables. Rigid and flexible s can be connected using accessories for rigid. If a bend other than 90 is required, it is possible to replace the elbow with a flexible and connecting parts. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). R R dn dn mm mm pcs mm mm pcs 10; 480 859505761775 10; 60 859505761722 16 4116 HB white 10; 480 859505764888 HB white 10; 60 859505764918 55 2 412 110 KB light grey 10; 480 859505761784 KB light grey 10; 60 859505761746 LB dark grey 10; 480 8595057617780 LB dark grey 10; 60 85950576179 10; 240 8595057617742 5; 5 859505761777 20 4120 HB white 10; 240 859505764895 HB white 5; 5 8595057650657 70 40 4140 15 KB light grey 10; 240 8595057617841 KB light grey 5; 5 8595057617865 LB dark grey 10; 240 8595057617797 LB dark grey 5; 5 8595057617810 10; 140 8595057617759 5; 0 8595057617766 25 4125 HB white 10; 140 859505764901 HB white 5; 0 8595057668874 85 50 4150 170 KB light grey 10; 140 8595057617858 KB light grey 5; 0 8595057617872 LB dark grey 10; 140 859505761780 LB dark grey 5; 0 8595057617827 material fire reaction class of underlying material mechanical resistance area with a risk of explosion color accessories temperature resistance self-snuffing classification code according to 6186-1 mechanical protection package

WIRING PIPES 17 Connectors for EN s PVC -25 - +60 C A1 - F 0 sec. IK09 Rigid and flexible s can be connected using accessories for rigid. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). L dn mm mm pcs 10; 100 8595057618060 16 0216E HB white 10; 100 859505764925 45 KB light grey 10; 100 859505761818 LB dark grey 10; 100 8595057618121 10; 800 8595057618077 20 0220 HB white 10; 800 85950576492 50 KB light grey 10; 800 8595057618190 LB dark grey 10; 800 859505761818 10; 480 8595057618084 25 0225 HB white 10; 480 859505764949 60 KB light grey 10; 480 8595057618206 LB dark grey 10; 480 8595057618145 10; 260 8595057618091 2 022 HB white 10; 260 859505764956 70 KB light grey 10; 260 859505761821 LB dark grey 10; 260 8595057618152 10; 120 8595057618107 40 0240 HB white 10; 120 85950576496 80 KB light grey 10; 120 8595057618220 LB dark grey 10; 120 8595057618169 10; 210 8595057618176 50 0250 HB white 10; 210 859505765759 88 KB light grey 10; 180 8595057618114 LB dark grey 10; 210 859505761827 2; 50 8595057625884 6 026 HB white 2; 50 859505765766 105 KB light grey 2; 44 8595057625860 LB dark grey 2; 50 8595057625877 material fire reaction class of underlying material area with a risk of explosion color accessories temperature resistance self-snuffing mechanical protection package

18 WIRING PIPES Clamps for EN s PVC -25 - +60 C A1 - F 0 sec. 2441410 IK09 The clamps are intended to fix the s to the underlying material. Pipes are installed by pushing between the clamp jaws. The clamps are equipped with elements for placing next to each other to create a continuous series of tubes, and also grooves for installation in supporting trunkings of 5820/.. (see page 2-65). The connection can be made for clamps of different sizes. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). A B dn mm mm mm pcs 10; 920 859505761940 16 516E HB white 10; 920 8595057648 4,x6,5 12 KB light grey 10; 920 859505761957 LB dark grey 10; 920 859505761964 10; 720 8595057618015 20 520 HB white 10; 720 859505764840 4,x6,5 12 KB light grey 10; 720 8595057617896 LB dark grey 10; 720 8595057617957 10; 1200 8595057618022 25 525 HB white 10; 1200 859505764857 4,x6,5 12 KB light grey 10; 1200 8595057617902 LB dark grey 10; 1200 8595057617964 10; 740 859505761809 2 52 HB white 10; 740 859505764864 5x10 14 KB light grey 10; 740 8595057617919 LB dark grey 10; 740 8595057617971 10; 400 8595057618046 40 540 HB white 10; 400 859505764871 5x10 14 KB light grey 10; 400 8595057617926 LB dark grey 10; 400 8595057617988 10; 50 859505761805 50 550 HB white 10; 420 8595057657045 6,6x10,2 14 KB light grey 10; 50 85950576179 LB dark grey 10; 50 8595057617995 10; 240 8595057657496 6 56 HB white 10; 00 8595057657502 6,6x10,2 14 KB light grey 10; 240 8595057657519 LB dark grey 10; 240 8595057657526 material fire reaction class of underlying material area with a risk of explosion mechanical protection package temperature resistance self-snuffing classification code according to 6186-25 color

WIRING PIPES 19 Halogen-free rigid wiring s - low mechanical resistance PC ABS -45 - +90 C A1 - F 0 sec. 20 N/5 cm 22521 IK06 EN 1516EHF 1520HF 1525HF 152HF 1540HF 1550HF 156HF Halogen-free rigid necked suitable for distribution systems in apartments and industrial environments. Halogen-free s are used on premises where the safety of people and property is primary, e.g.: public buildings, hospitals, schools, theatres, airport halls, shopping centres, etc. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). The s are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). The s are UV-stabilized. dn di min. L mm mm m m pg. FA 0; 000 859505762642 16 1,1 KA light grey 0; 000 859505761854 FA 0; 1890 859505762640 20 17,1 KA light grey 0; 1890 859505761861 FA 0; 1260 8595057626966 25 21,6 KA light grey 0; 1260 859505761878 FA 0; 750 859505762697 2 28,4 KA light grey 0; 750 859505761885 FA 0; 480 8595057626447 40 6,0 KA light grey 0; 480 859505761892 FA 0; 270 8595057626454 50 45,6 KA light grey 0; 270 859505761908 FA 15; 240 859505761489 6 58,4 KA light grey 15; 240 859505761915-20 - -21 Halogen-free rigid wiring s - medium mechanical resistance PC ABS -45 - +90 C A1 - F 0 sec. 750 N/5 cm 521 IK07 Halogen-free rigid necked suitable for distribution systems in apartments and industrial environments. Halogen-free s are used on premises where the safety of people and property is primary, e.g.: public buildings, hospitals, schools, theatres, airport halls, shopping centres, etc. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). The s are UV-stabilized. EN 4016EHF 4020HF 4025HF 402HF 4040HF 4050HF 406HF dn di min. L mm mm m m pg. FA 15; 000 8595057688254 16 12,7 KA light grey 15; 000 8595057690868 FA 15; 1890 8595057688261 20 16,7 KA light grey 15; 1890 8595057690875 FA 15; 1260 8595057688278 25 21,0 KA light grey 15; 1260 8595057690882 FA 15; 750 8595057688285 2 28,0 KA light grey 15; 750 8595057690899 FA 15; 480 8595057688292 40 5,4 KA light grey 15; 480 8595057690905 FA 15; 270 859505768808 50 45,2 KA light grey 15; 270 8595057690912 FA 15; 240 859505768815 6 57,8 KA light grey 15; 240 8595057690929-20 - -21 material self-snuffing area with a risk of explosion halogen-free material package temperature resistance mechanical resistance functionality during a fire UV stable accessories fire reaction class of underlying material classification code according to 6186-1 mechanical protection color

20 WIRING PIPES Halogen-free rigid wiring s - high mechanical resistance PC ABS -45 - +90 C A1 - F 0 sec. 1250 N/5 cm 44521 IK09 Halogen-free rigid necked suitable for distribution systems in apartments and industrial environments. Halogen-free s are used on premises where the safety of people and property is primary, e.g.: public buildings, hospitals, schools, theatres, airport halls, shopping centres, etc. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). The s are UV-stabilized. EN 8016EHF FA dn di min. L mm mm m m pg. 16 11,7 15; 000 859505768822 8020HF FA 20 15,7 15; 1890 85950576889 8025HF FA 25 20,2 15; 1260 859505768846 802HF FA 2 27,0 15; 750 85950576885 8040HF FA 40 4,8 15; 480 859505768860 8050HF FA 50 44,2 15; 270 859505768877 806HF FA 6 56,8 15; 240 859505768884-20 - -21 Elbows for halogen-free EN s PC ABS -45 - +90 C A1 - F 0 sec. IK09 The elbows with double-sided necks are intended for 90 bends. Bending radius ensures smooth transition and allows easy retraction of wires and cables. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). The elbows are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). Elbows in are UV stable. R dn mm mm pcs 16 4116HF 10; 480 8595057626461 55 KB light grey 10; 480 8595057629288 20 4120HF 10; 240 8595057626478 70 KB light grey 10; 240 8595057629295 25 4125HF 10; 140 8595057626256 85 KB light grey 10; 120 859505762901 2 412HF 10; 60 859505762626 110 KB light grey 10; 60 859505762918 40 4140HF 5; 5 8595057626485 15 KB light grey 5; 5 8595057651166 50 4150HF 5; 0 8595057626492 170 KB light grey 5; 0 8595057699281 material self-snuffing area with a risk of explosion halogen-free material package temperature resistance mechanical resistance functionality during a fire UV stable accessories fire reaction class of underlying material classification code according to 6186-1 mechanical protection color

WIRING PIPES 21 Connectors for halogen-free EN s PC ABS -45 - +90 C A1 - F 0 sec. IK09 Connectors are designed to join s. Socketing of s and elbows reduces the consumption of connectors when making rigid installations. It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). The couplings are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). Connectors in are UV stable. L dn mm mm pcs 16 0216HF 10; 120 8595057626508 45 KB light grey 10; 100 859505761922 20 0220HF 10; 840 8595057626515 50 KB light grey 10; 800 85950576199 25 0225HF 10; 480 8595057626270 60 KB light grey 10; 480 859505761946 2 022HF 10; 260 8595057626287 70 KB light grey 10; 260 85950576195 40 0240HF 10; 120 8595057626522 80 KB light grey 10; 120 859505761960 50 0250HF 10; 180 859505762659 88 KB light grey 10; 180 859505761977 6 026HF 2; 50 859505762956 105 KB light grey 2; 50 859505761984 Clamps for halogen-free EN s PC ABS -45 - +90 C A1 - F 0 sec. 2452410 IK09 The clamps are intended to fix the s to the underlying material. Pipes are installed by pushing between the clamp jaws. The clamps are equipped with elements for placing next to each other to create a continuous series of tubes, and also grooves for installation in supporting trunkings of 5820/.. (see page 2-65). It is possible to install on premises where there is danger of explosions of flammable gases and vapours (zone 2) and on premises where there is danger of explosions of flammable dust (zone 22). Clamps in are UV stable. A B dn mm mm mm pcs 16 516EHF 10; 920 8595057626546 4,4x6,4 12,4 KB light grey 10; 920 859505761809 20 520HF 10; 720 859505762655 4,4x8 12,4 KB light grey 10; 1900 859505761816 25 525HF 10; 1280 8595057626294 4,4x8 14 KB light grey 10; 1280 85950576182 2 52HF 10; 840 859505762600 5,4x10 14 KB light grey 10; 740 85950576180 40 540HF 10; 520 8595057626560 5,4x10 14 KB light grey 10; 520 859505761847 50 550HF 10; 420 8595057626577 6,6x10,2 14 KB light grey 10; 420 859505762769 6 56HF 10; 240 8595057688759 6,6x10,2 14 KB light grey 10; 240 8595057688742 material self-snuffing area with a risk of explosion mechanical protection color temperature resistance mechanical resistance functionality during a fire halogen-free material package fire reaction class of underlying material classification code according to 6186-1 classification code according to 6186-25 UV stable accessories

22 WIRING PIPES KOPOFLEX - flexible doublecoat corrugated HDPE storage: -45- +60 C A1 450 N/20 cm montage: -5 - +60 C IP40 Halogen-free flexible double-coated designed for mechanical protection of all kinds of power and data wiring. The s are made in compliance with ČSN EN 6186-24. Each coil is equipped with a pull-through string or wire that ensures easy cable insertion and a coupling on one end. When using a sealing ring, the protection class is IP 67. In case of mechanical compaction of layers above the protector, take care not to exceed the value of the load capacity of the protector - see catalogue PIPE PROTECTORS. dn di L in stock mm mm mm m m cm pg. AA orange 50 000 - min. 000 m 8595057619425 KF 09040 KF 09050 KF 0906 KF 09075 KF 09090 KF 09110 BA 50 000 8595057606 red 65 x 0 BB 25 000 859556891742 CA 50 000 8595057615625 blue 40 2 20 CB 25 000 50 x 25 8595057621107 DA green 50 000 - min. 000 m 859505761942 EA yellow 50 000 65 x 0 - min. 000 m 8595057608641 FA 50 000 8595057616226 AA orange 50 1800 - min. 1800 m 8595057619241 BA 50 1800 859505760640 red 80 x 5 BB 25 1575 859556891740 CA 50 1800 859505765595 blue 50 41 50 CB 25 1575 70 x 25 8595057655928 DA green 50 1800 - min. 1800 m 8595057697270 EA yellow 50 1800 80 x 5 - min. 1800 m 859505760657 FA 50 1800 85950576162 AA orange 50 - - min. 1500 m 8595568912442 BA red 50-95 x 5 85950576470 CA blue 50-8595057644977 6 52 50 DA green 50 - - min. 1500 m 8595568915221 EA yellow 50-95 x 5 - min. 1500 m 8595057668911 FA 50-8595057650527 BA red 50-859505764710 110 x 40 CA 50-8595057644991 blue CB 25-90 x 5 8595057645004 75 61 50 DA green 50 - - min. 1000 m 8595057684027-24 EA yellow 50-110 x 40 8595057651449 FA 50-859505765054 AA orange 50 - - min. 1000 m 8595568918796 BA red 50-859505764727 90 75 400 120 x 45 CA blue 50-859505765045 FA 50-8595057650442 AA orange 50 - - min. 1000 m 859505761924 120 x 65 BA 50-859505760664 red BB 25-105 x 50 8595057692824 CA 50-120 x 65 8595057615649 blue 110 94 400 CB 25-105 x 50 8595057655911 DA green 50 - - min. 1000 m 8595568915184 EA yellow 50-120 x 65 - min. 1000 m 8595057651456 FA 50-8595057616240 KF 09125 BA red 125 108 500 50-160 x 60 85950576186 BA 50-160 x 80 859505764741 red BB 25-160 x 45 8595057647800 KF 09160 CA 160 16 650 50-160 x 80 8595057647787 blue CB 25-160 x 45 8595057647794 FA 50-160 x 80 8595057650565 BB red 25-859556890587 KF 09200 200 176 850 170 x 70 25-8595057688568 material fire reaction class of underlying material IP protection color package to order, delivery time weeks temperature resistance mechanical resistance halogen-free material bending radius standard accessories

WIRING PIPES 2 KOPOFLEX - UV-stabilized flexible doublecoat corrugated HDPE storage: -45- +60 C A1 450 N/20 cm montage: -5 - +60 C IP40 Halogen-free UV stable flexible double-coated designed for mechanical protection of all kinds of power and data wiring. The s are made in compliance with ČSN EN 6186-24. Each coil is equipped with a pull-through string or wire that ensures easy cable insertion and a coupling on one end. When using a sealing ring, the protection class is IP 67. In case of mechanical compaction of layers above the protector, take care not to exceed the value of the load capacity of the protector - see catalogue PIPE PROTECTORS. KF 09040 KF 09050 KF 0906 KF 09075 KF 09090 KF 09110 KF 09160 dn di L in stock mm mm mm m m cm pg. UVBA red 50 000 - min. 1000 m 8595057698154 UVCA blue 40 2 20 50 000 65 x 0 - min. 1000 m 8595057698161 UVFA 50 000 8595057698147 UVBA red 50 1800 - min. 1000 m 8595057698185 UVCA blue 50 41 50 50 1800 80 x 5 - min. 1000 m 8595057698192 UVFA 50 1800 8595057698178 UVBA red 50 - - min. 1000 m 8595057698215 UVCA blue 6 52 50 50-95 x 5 - min. 1000 m 8595057698222 UVFA 50-8595057698208 UVBA red 50 - - min. 1000 m 859505769845 UVCA blue 75 61 50 50-110 x 40 - min. 1000 m 859505769852-24 UVFA 50-85950576988 UVBA red 50 - - min. 1000 m 8595057698246 UVCA blue 90 75 400 50-120 x 45 - min. 1000 m 859505769825 UVFA 50-859505769829 UVBA red 50 - - min. 1000 m 8595057698277 UVCA blue 110 94 400 50-120 x 65 - min. 1000 m 8595057698284 UVFA 50-8595057698260 UVBA red 50 - - min. 1000 m 859505769876 UVCA blue 160 16 650 50-160 x 80 - min. 1000 m 85950576988 UVFA 50-859505769869 KOPOFLEX - halogen-free self-snuffing flexible double-coated HDPE storage: -45- +60 C A1 - F 0 sec. 450 N/20 cm IP40 montage: -5 - +60 C Flexible double-coated self-snuffing designed for mechanical protection of all kinds of power and data wiring. Fire spread test according to ČSN EN 6186-1. dn di L in stock mm mm mm m cm KF 09110 SKA light grey 110 94 400 50 120 x 65 - min. 1000 m 8595568921192 material self-snuffing halogen-free material bending radius package temperature resistance mechanical resistance UV stable standard accessories fire reaction class of underlying material IP protection color to order, delivery time weeks

24 WIRING PIPES KOPODUR - rigid doublecoat corrugated HDPE storage: -45- +60 C A1 450 N/20 cm montage: -5 - +60 C IP40 Halogen-free rigid double-coated designed for mechanical protection of all kinds of power and data wiring. The s are made in compliance with ČSN EN 6186-24. The is available in form of a bar, the coupling is put on one end of it. The connection is sealed dust/sand resistant. When using a sealing ring, the protection class is IP 67. In case of mechanical compaction of layers above the protector, take care not to exceed the value of the load capacity of the protector - see catalogue PIPE PROTECTORS. dn di L in stock mm mm m m cm KD 09040 BC red 40 2 6 42 45 x 45 x 605 - min. 1000 m 859505764758 BC red 6 60 - min. 1000 m 859505764765 KD 09050 CC blue 50 41 6 60 82 x 66 x 605 - min. 1000 m 8595057650459 FC 6 60 - min. 1000 m 8595057689404 KD 0906 BC red 6 52 6 12 80 x 52 x 605 859505764772 KD 09075 BC red 6 12 859505764789 75 61 104 x 88 x 607 CC blue 6 12 8595057650121 BC red 6 12 - min. 1000 m 859505764796 KD 09090 CC blue 90 75 6 12 120 x 76 x 607 - min. 1000 m 8595057651401 FC 6 12 - min. 1000 m 85950576885 BC red 6 462 112 x 95 x 610 8595057606449 KD 09110 CC blue 110 94 6 216 8595057655942 77 x 64 x 610 FC 6 216 - min. 1000 m 8595057656451 BA 6 288 - min. 1000 m 8595057619876 red KD 09125 BC 125 108 6 06 120 x 72 x 610 - min. 1000 m 8595057618299 CC blue 6 288 - min. 1000 m 8595057688049 BC red 6 198 859505764819 KD 09160 CC blue 160 16 6 198 120 x 72 x 610 8595057647848 FC 6 198 8595057651418 KD 09200 BC red 200 176 6 120 122 x 74 x 615 859505761812 Accessories for corrugated s KOPOFLEX and KOPODUR -45 - +60 C Couplings - slip-over couplings are the same for both types of s and are used to join the s. Sealing rings - the same for both types of s and are used to seal the joint to prevent it against humidity and water. Closing plugs - for blinding of backup lines and for temporary blinding of s when installing. Distance spacers - for position fixation of several s in one excavation. Distance spacers are for fixation 8 s and spacer can be split for fixation 2, 4 and 6 s. Per order only. Couplings Sealing rings Closing plugs Distance spacers dn mm 40 02040 FA 8595057612082 16040 8595057606609 17040 BB 8595057606661 50 02050 FA 859505761249 16050 8595057606616 17050 BB 8595057606678 07050/8 859505761511 6 0206 FA 8595057650466 1606 859505760662 1706 BB 8595057606685 0706/8 8595057626225 75 02075 FA 859505765047 16075 859505760660 17075 BB 8595057606692 07075/8 8595057622111 90 02090 FA 8595057650480 16090 8595057609167 17090 BB 8595057609204 07090/8 859505765805 110 02110 FA 8595057612075 16110 8595057606647 17110 BB 8595057606708 07110/8 859505761058 125 02125 8595057699946 17125 BB 8595057606715 07125/8 85950576506 160 02160 FA 8595057650497 17160 BB 8595057609228 07160/8 859505765050 200 02200 859505761748 17200 BB 8595057610798 07200/8 8595057658059 material fire reaction class of underlying material IP protection color standard temperature resistance mechanical resistance halogen-free material package to order, delivery time weeks

WIRING PIPES 25 KOPOHALF - divided cable duct HDPE storage: -45- +75 C A1 06110/2-450 N/20 cm montage: -5 - +75 C 06160/2-750 N/20 cm IP0 A system of divided cable ducts is suitable mainly for a protection of underground cable laying and for a laying-out of the energy and communication lines. Another possible application is a protection of already installed underground cables. The protectors consist of two identical parts. When installing, the cables are put in the bottom part and then the top part is snapped to the bottom one. Connecting of protectors is performed by overlapping joined lower parts with an upper part at length of approximately 0 cm. The divided cable ducts are manufactured and tested in accordance with standard ČSN EN 6186-24. description dn di min. L mm mm m m BA in distributed position red 162 8595057651814 BAD interlocked red 105 85950576971 06110/2 CA in distributed position blue 162 8595057651821 110 97 CAD interlocked blue 105 85950576988 EA in distributed position yellow 162 8595057695924 FA in distributed position 162 8595057688506 BA in distributed position red 72 8595057651791 BAD interlocked red 45 85950576995 06160/2 CA in distributed position blue 160 16 72 8595057651807 CAD interlocked blue 45 859505769401 EA in distributed position yellow 72 859505769591 KOPOHALF - divided cable duct PVC storage: -25- +60 C A1 - F 0 sec. 750 N/20 cm IP0 montage: -15 - +60 C A system of divided cable ducts is suitable mainly for a protection of underground cable laying and for a laying-out of the energy and communication lines. Another possible application is a protection of already installed underground cables. The protectors consist of two identical parts. When installing, the cables are put in the bottom part and then the top part is snapped to the bottom one. Connecting of protectors is performed by overlapping joined lower parts with an upper part at length of approximately 0 cm. The divided cable ducts are manufactured and tested in accordance with standard ČSN EN 6186-24. dn di min. L description mm mm m m BA in distributed position red 162 8595568922007 BAD interlocked red 105 8595568922014 06110P/2 110 97 CA in distributed position blue 162 8595568922021 CAD interlocked blue 105 859556892208 material fire reaction class of underlying material mechanical resistance halogen-free material package temperature resistance self-snuffing IP protection color

26 WIRING PIPES KOPOKAN - earthen channel PVC -5 - +60 C A1 - F 0 sec. IP0 Earthen channels are intended for mechanical protection of installation of engineering networks to be loaded under ground. By its technical parameters those fully replace the earlier used concrete channels. There is possible to use them for additional protection already installed earthen engineering networks. Floor trunkings are supplied with a colour lid. Connected using connectors and folding the lid over, thus interconnecting the individual parts. Strength limit on compression tested on length 00 mm. Earthen channels are manufactured according to ČSN EN 6186-1 and ČSN EN 6186-24. A B L mm mm m m kpa KOPOKAN 1 CD grey body / blue lid 2 140 8595568915474 100 100 48 ZD grey body / red lid 2 140 8595568905116 KOPOKAN 2 ZD grey body / red lid 120 100 2 162 22 859556890512 KOPOKAN ZD grey body / red lid 10 140 2 224 295 859556890510 KOPOKAN 4 CD grey body / blue lid 2 70 8595568922205 200 125 204 ZD grey body / red lid 2 70 8595568905147 P connection for KOPOKAN PVC -5 - +60 C A1 - F 0 sec. Connector is used to connect the ground channels. It provides a straight direction. description A B L mm mm m pcs SPOJKA K1 ZB for channel KOPOKAN 1 120 80 100 1; 50 8595568905154 SPOJKA K2 ZB for channel KOPOKAN 2 15 80 100 1; 50 8595568905161 SPOJKA K ZB for channel KOPOKAN 151 80 100 1; 50 8595568905178 SPOJKA K4 ZB for channel KOPOKAN 4 221 80 120 1; 5 8595568905185 material fire reaction class of underlying material IP protection package temperature resistance self-snuffing color P limit of compression strength

WIRING PIPES 27 Optical cable protectors HDPE HDPE -5 - +50 C A1 750 N/20 cm 06025 0602 06040 06050 description Single-coated s designed to protect optical cables. Cable protectors there is possible to deliver with inner wall to be lubrificated by mineral oil. For larger volumes different color versions (beyond presented versions), labeling, number of differential stripes, denticular inner surface or inner diameter size (material thickness) can be ordered based on customer needs and specifications. Shock resistance: N (normal, ČSN EN 6186-24) Bend resistance: flexible The protectors are tested under pressure of 1,5 MPa for the time of 1 hour. The packaging on wooden drums and pallets for unwinding drums is delivered just upon previous order according to the customers's specification. dn di L in stock mm mm m mm pg. FS100 - min. 000 m 85955689070 harness 25 20 100 400 KS100 light grey - min. 000 m 859556890860 AB drum 1750 - min. 000 m 859505765711 orange AS100 harness 100 859505765728 BB drum 1750 - min. 000 m 85950576568 red BS100 harness 100 859505765690 CB drum blue 1750 - min. 000 m 8595057657441 2 26 / 27 400 EB drum 1750 - min. 000 m 8595057656406 yellow ES100 harness 100 - min. 000 m 859505765641 drum 1750 - min. 000 m 859556891557 FS100 harness 100 8595057665552 LS100 harness dark grey 100 8595057665569 AB drum 1750 - min. 1750 m 85950576559 AP harness - pallet 2000 - min. 1750 m 8595057658226 orange AS100 100 8595057655409 harness AS00 00 - min. 1750 m 8595568919540 BB drum 1750 - min. 1750 m 8595057655416 BS100 red 100 859505765542 harness BS00 00 - min. 1750 m 8595568900 CB drum 1750 - min. 1750 m 859505765540 CP harness - pallet 2000 - min. 1750 m 8595057696242 blue CS100 100 8595057655447 harness CS00 00 - min. 1750 m 859556890457 DB drum 1750 - min. 1750 m 8595057655454 DS100 green 100 - min. 1750 m 8595057655461 harness 40 / 4 / 5 400 DS00 00 - min. 1750 m 859556890297 EB drum 1750 - min. 1750 m 8595057655478 ES100 yellow 100 - min. 1750 m 8595057655485 harness ES00 00 - min. 1750 m 859556890716 drum 1750 - min. 1750 m 8595057655492 FP harness - pallet 2000 - min. 1750 m 859505766567 FS100 harness 100 8595057655508 KB drum 1750 - min. 1750 m 859505765559 KS100 light grey 100 8595057655546 harness KS00 00 - min. 1750 m 859556890440 LB drum 1750 - min. 1750 m 859505765555 LS100 dark grey 100 - min. 1750 m 8595057655560 harness LS00 00 - min. 1750 m 8595568904 AB drum 1250 - min. 2500 m 8595057657298 orange AS100 harness 100 - min. 2500 m 859505765704 BS100 harness red 100 8595057699540 CB drum 1250 - min. 2500 m 8595057689978 CP harness - pallet blue 1250 - min. 2500 m 8595057689411 CS100 harness 50 41 / 44 100 500 - min. 2500 m 8595057691070 drum 1250 - min. 2500 m 8595568912558 FP harness - pallet 1250 - min. 2500 m 8595057698475 FS100 harness 100 8595057665576 KS100 harness light grey 100 - min. 2500 m 859505768992 LS100 harness dark grey 100 - min. 2500 m 859505766558-28 - -29 material fire reaction class of underlying material halogen-free material bending radius standard temperature resistance mechanical resistance color accessories to order, delivery time weeks

28 WIRING PIPES Screw connectors for optical cable protectors PP -5 - +50 C A1 The connector is designed to join HDPE optic cable protector when routing and ensures a perfect connection. PN16 pressure line. dn mm pcs 05025 KB 25 1 8595568905451 0500 KB 2 1 85950576575 grey 05040 KB 40 1 8595057606821 05050 KB 50 1 8595057651579 Push connectors for optical cable protectors PP -5 - +50 C A1 The connector is designed to join HDPE optic cable protector when routing and ensures a perfect connection. The is pushed onto the connector. PN16 pressure line. 050 KB 2 1 8595057657694 0504 KB grey 40 1 8595057657700 0505 KB 50 1 8595057657717 dn mm pcs material fire reaction class of underlying material package temperature resistance color

WIRING PIPES 29 Fittings for optical cable protectors PP -5 - +50 C A1 The fitting is used to end the routing. PN16 pressure line. dn mm pcs 05024 KB 25 1 8595568905468 0501 KB 2 1 859505765742 grey 05041 KB 40 1 8595057629271 05051 KB 50 1 8595057651586 Vented fittings for optical cable protectors PP -5 - +50 C A1 Vented fitting is used to check the installed lines using compressed air. PN16 pressure line. dn mm pcs 0502 KB 2 1 8595057667181 05042 KB 40 1 85950576519 material fire reaction class of underlying material package temperature resistance color

0 WIRING PIPES ČSN steel threaded s - high mechanical resistance steel -60 - +250 C 1250 N/5 cm 44561 IK10 The s are suitable for mechanical protection of conductors and cables. Threaded conduits are supplied with one coupler. While using s along with bushing 481/P - 4842/P and 491-4942 is scope of application only -5 - +60 C. Unvarnished: without surface finish, without corrosion resistance, suitable mostly for construction purposes ZNM: Sendzimir galvanized, zinc layer 15-27 µm, replaces shop primer, medium corrosive resistance - g. 2 Varnished: Sendzimir galvanized steel finished with powder technology, color, medium corrosive resistance - g. 2 ZN: after steel bar welding hot-galvanized using immersion, zinc layer 50-100 µm, high corrosion resistance - g. 4 The s are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). description dn di min. L mm mm mm m m pg. unvarnished 601 N XX 20,4 18,2 1,1 P1,5 0 8595057607491 6016 N XX 22,5 20, 1,1 P16 0 8595057607507-0 6021 N XX 28, 25,7 1, P21 0 8595057607514-1 without surface finish 6029 N XX 7 4,4 1, P29 15 8595057607521-606 N XX 47 44 1,5 P6 15 859505760758-8 6042 N XX 54 51 1,5 P42 15 8595057607545 ZNM 601 ZNM S 20,4 18,2 1,1 P1,5 0; 1200 8595057627208 6016 ZNM S 22,5 20, 1,1 P16 0; 1200 8595057626157-0 6021 ZNM S 28, 25,7 1, P21 0; 750 8595057626164-1 Sendzimir galvanized 6029 ZNM S 7 4,4 1, P29 15; 450 8595057626171-606 ZNM S 47 44 1,5 P6 15; 00 8595057626188-8 6042 ZNM S 54 51 1,5 P42 15; 225 8595057626195 varnished 601 EOZ 20,4 18,2 1,1 P1,5 0; 1200 8595057618657 6016 EOZ Sendzimir galvanized 22,5 20, 1,1 P16 0; 1200 8595057618664-0 6021 EOZ steel circumferentially 28, 25,7 1, P21 0; 750 8595057618671-1 6029 EOZ painted 7 4,4 1, P29 15; 450 8595057618688-606 EOZ using powder technology 47 44 1,5 P6 15; 00 8595057618695-8 6042 EOZ 54 51 1,5 P42 15; 225 8595057618701 601 ZN F ZN 20,4 18,2 1,1 P1,5 0; 1200 8595057618718 6016 ZN F 22,5 20, 1,1 P16 0; 1200 8595057618725 6021 ZN F 28, 25,7 1, P21 0; 750 859505761872 hot-dip galvanized 6029 ZN F 7 4,4 1, P29 15; 450 8595057618749 606 ZN F 47 44 1,5 P6 15; 00 8595057618756 6042 ZN F 54 51 1,5 P42 15; 225 859505761876-0 -1 - -8 Connectors for steel threaded ČSN s Al IK10 The connectors are designed to join steel s and elbows for mechanical protection of cables or wires. L mm inner pcs 1/1 XX 0 P1,5 10; 540 8595057604865 16/1 XX 5 P16 10; 50 8595057604872 21/1 XX 40 P21 10; 240 8595057604889 29/1 XX 45 P29 10; 120 8595057604896 6/1 XX 55 P6 10; 60 8595057604902 42/1 XX 60 P42 10; 100 8595057604919 material mechanical resistance functionality during a fire wall thickness package temperature resistance classification code according to 6186-1 thread mechanical protection accessories

WIRING PIPES 1 Extending connectors for ČSN steel s Al Connectors are designed to join flexible metal s, series (pg. -41) with steel threaded s. On one side is the inner PG thread, on the other side is the locking notch for fixing the flexible metal. While stocks last. L dn mm mm inner pcs 981 XX 0 18,9 P1,5 10; 540 8595057605060 9816 XX 5 21,4 P16 10; 50 8595057605077 9829 XX 45 5,2 P29 10; 120 8595057605091 Elbows for ČSN steel threaded s - high mechanical resistance steel -60 - +250 C 1250 N/5 cm 44561 IK10 Elbows are fitted with a connector on one side. ZNM: Sendzimir galvanized, zinc layer 15-27 µm, replaces shop primer, medium corrosive resistance - g. 2. Varnished: Sendzimir galvanized steel finished with powder technology, color, medium corrosive resistance - g. 2 ZN: after steel bar welding hot-galvanized using immersion, zinc layer 50-100 µm, high corrosion resistance - g. 4 The elbows are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). description dn R mm mm pcs ZNM 611 ZNM S 20,4 P1,5 80 1; 25 8595057627277 6116 ZNM S 22,5 P16 100 1; 25 8595057627284 6121 ZNM S 28, P21 120 1; 20 8595057627291 Sendzimir galvanized 6129 ZNM S 7 P29 155 1; 20 859505762707 616 ZNM S 47 P6 185 1; 5 859505762714 6142 ZNM S 54 P42 200 1; 5 859505762721 varnished 611 EOZ 20,4 P1,5 80 1; 25 859505761889 6116 EOZ 22,5 P16 100 1; 25 8595057618909 6121 EOZ Sendzimir galvanized steel 28, P21 120 1; 20 8595057618916 circumferentially painted 6129 EOZ using powder technology 7 P29 155 1; 20 859505761892 616 EOZ 47 P6 185 1; 5 859505761890 6142 EOZ 54 P42 200 1; 5 8595057618947 ZN 611 ZN F 20,4 P1,5 80 1; 25 8595057618954 6116 ZN F 22,5 P16 100 1; 25 8595057618961 6121 ZN F 28, P21 120 1; 20 8595057618978 hot-dip galvanized 6129 ZN F 7 P29 155 1; 20 8595057618985 616 ZN F 47 P6 185 1; 5 8595057618992 6142 ZN F 54 P42 200 1; 5 8595057619005 material mechanical resistance functionality during a fire mechanical protection temperature resistance classification code according to 6186-1 thread package

2 WIRING PIPES ČSN steel unthreaded s - high mechanical resistance steel -60 - +250 C 1250 N/5 cm 44561 IK10 The s are suitable for mechanical protection of conductors and cables. While using s along with bushing 481/P - 4842/P and 491-4942 is scope of application only -5 - +60 C. Unvarnished: without surface finish, without corrosion resistance, suitable mostly for construction purposes ZNM: Sendzimir galvanized, zinc layer 15-27 µm, replaces shop primer, medium corrosive resistance - g. 2 ZN: after steel bar welding hot-galvanized using immersion, zinc layer 50-100 µm, high corrosion resistance - g. 4 description 6216 N XX dn di min. L mm mm mm m m pg. unvarnished 22,5 20, 1,1 1200 859505760758 6221 N XX 28, 25,7 1, 750 859505760761 6229 N XX without surface finish 7 4,4 1, 600 8595057607644 626 N XX 47 44 1,5 00 8595057607675 6242 N XX 54 51 1,5 225 8595057607705 621 ZNM S 6221 ZNM S 28, 25,7 1, 0; 750 859505760767 Sendzimir galvanized 6229 ZNM S 7 4,4 1, 15; 450 8595057607668 626 ZNM S 47 44 1,5 15; 00 8595057607699 6242 ZNM S 54 51 1,5 15; 225 8595057607729 ZNM 20,4 18,2 1,1 0; 1200 8595057607576 6216 ZNM S 22,5 20, 1,1 0; 1200 8595057607606 621 ZN F 6221 ZN F 28, 25,7 1, 0; 750 859505769841 hot-dip galvanized 6229 ZN F 7 4,4 1, 15; 450 8595057698420 626 ZN F 47 44 1,5 15; 00 859505769847 6242 ZN F 54 51 1,5 15; 225 8595057698444 ZN 20,4 18,2 1,1 0; 1200 859505769890 6216 ZN F 22,5 20, 1,1 0; 1200 8595057698406-2 - -8-2 - -8-2 - -8 Slide-on connectors for ČSN steel s steel IK10 The connectors are designed to join steel s for mechanical protection of cables or wires. Both ends are fitted with sockets. The connectors are manufactured from strip steel by welding. description di dn mm mm pcs 1/2 XX 20,9 20,4 10 8595057620094 16/2 XX 2,1 22,5 10 8595057620100 21/2 XX 28,8 28, 10 8595057620117 ZNCR 29/2 XX 7,5 7,0 10 8595057620124 6/2 XX 47,5 47,0 10 859505762011 42/2 XX 54,6 54,0 10 8595057620148 material mechanical resistance mechanical protection package temperature resistance classification code according to 6186-1 wall thickness accessories

WIRING PIPES Double-sided clamps for ČSN steel s steel 456210 The clamps are designed to attach ČSN steel s to the pad. description D L A d mm mm mm mm mm pcs 521 PC S 20,4 44,5 100; 100 8595057605008 5216 PC S 22,5 45,5 10 0,8 4, 100; 1100 8595057605015 5221 PC S 28, 55, 100; 800 8595057605022 Sendzimir galvanized 5229 PC S 7 67,0 50; 50 859505760509 526 PC S 47 8,0 15 1,1 5, 50; 200 8595057605046 5242 PC S 54 95,0 50; 150 859505760505 OMEGA clamps for ČSN steel s steel -60 - +250 C S - 456210 IK10 F - 456410 The clamps are designed to attach ČSN steel s to the pad. The clamps are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). description dn A di mm mm mm pcs ZNM 5220 ZNM S 20,4; 22,5 19-2 1; 100 8595057692091 5225 ZNM S 28, 24-28 1; 100 8595057692107 522 ZNM S Sendzimir galvanized 7 6, x 9,8 0-40 1; 100 8595057692114 5250 ZNM S 47 9-52 1; 50 859505769218 526 ZNM S 54 5-6 1; 50 8595057692145 ZN 5220 ZN F 20,4; 22,5 19-24 1; 50 8595568915276 5225 ZN F 28, 24-29 1; 50 859556891528 522 ZN F hot-dip galvanized 7 6,1 x 9,8 29-8 1; 25 8595568915290 5240 ZN F 47 8-47 1; 20 859556891506 5250 ZN F 54 47-55 1; 50 85955689151 material functionality during a fire sheet metal thickness package temperature resistance classification code according to 6186-25 mechanical protection

4 WIRING PIPES EN steel threaded s - very high mechanical resistance steel -45 - +250 C 4000 N/5 cm 55561 IK10 The s are suitable for mechanical protection of conductors and cables. Threaded conduits are supplied with one coupler. While using s along with bushing 4816E - 486 is scope of application only -5 - +60 C. ZNM: Sendzimir galvanized, zinc layer 15-27 µm, replaces shop primer, medium corrosive resistance - g. 2 Varnished ECZ: smooth steel material to be varnished by both sides colour, medium corrosive resistance - g. 2 Varnished EOZ: Sendzimir galvanized steel finished with powder technology, color, medium corrosive resistance - g. 2 ZN: after steel bar welding hot-galvanized using immersion, zinc layer 50-100 µm, high corrosion resistance - g. 4 The s are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). description dn di min. L mm mm mm m m pg. ZNM 6020 ZNM S 20 15,8 1,5 M20x1,5 0; 1200 8595568919601-4 6025 ZNM S 25 20,6 1,5 M25x1,5 0; 600 85955689209-5 Sendzimir galvanized 602 ZNM S 2 26,6 1,5 M2x1,5 21; 420 859556892242-7 6040 ZNM S 40 4,4 1,5 M40x1,5 15; 450 859556892752-8 varnished 6016E ECZ painted in on both sides 16 12,2 1,4 M16x1,5 0; 1200 859505764152 6020 EOZ 20 15,8 1,5 M20x1,5 0; 1200 8595568919595 6025 EOZ 25 20,6 1,5 M25x1,5 0; 600 859556892079 painted in circumferentially 602 EOZ 2 26,6 1,5 M2x1,5 21; 420 859556892266 6040 EOZ 40 4,4 1,5 M40x1,5 15; 450 859556892769 6050 ECZ 50 4,8 1,6 M50x1,5 15; 00 859505764206 painted in on both sides 606 ECZ 6 58,8 1,8 M6x1,5 15; 150 85950576421 6016E ZN F Connectors for steel threaded EN s ZN 16 12,2 1,4 M16x1,5 0; 1200 85950576104 6020 ZN F 20 15,8 1,5 M20x1,5 0; 1200 85950576111 6025 ZN F 25 20,6 1,5 M25x1,5 0; 600 85950576128 602 ZN F hot-dip galvanized 2 26,6 1,5 M2x1,5 21; 420 8595057615 6040 ZN F 40 4,4 1,5 M40x1,5 15; 450 85950576142 6050 ZN F 50 4,8 1,6 M50x1,5 15; 00 85950576159 606 ZN F 6 58,8 1,8 M6x1,5 15; 150 859505761595-4 -5-7 -8-4 -5-7 -8 steel -45 - +250 C IK10 The connectors are designed to join steel s and elbows for mechanical protection of cables or wires. description L mm pcs varnished 16E/1 ECZ 0 M16x1,5 1; 25 859505764640 20/1 ECZ 0 M20x1,5 1; 50 859505764657 25/1 ECZ 6 M25x1,5 1; 50 859505764664 2/1 ECZ painted in on both sides 45 M2x1,5 1; 50 859505764671 40/1 ECZ 48 M40x1,5 1; 25 859505764688 50/1 ECZ 70 M50x1,5 1; 10 859505764695 6/1 ECZ 105 M6x1,5 1; 5 859505764701 ZN or ZN-Ni 16E/1 ZN F 0 M16x1,5 1; 25 859505764572 20/1 ZN F 0 M20x1,5 1; 50 859505764589 25/1 ZN F 6 M25x1,5 1; 50 859505764596 2/1 ZN F hot-dip galvanized or zinc - nickel coating 45 M2x1,5 1; 50 859505764602 40/1 ZN F 48 M40x1,5 1; 25 859505764619 50/1 ZN F 70 M50x1,5 1; 10 859505764626 6/1 ZN F 105 M6x1,5 1; 5 8595057646 material mechanical resistance functionality during a fire mechanical protection package temperature resistance classification code according to 6186-1 thread wall thickness accessories

WIRING PIPES 5 Elbows for EN steel threaded s - very high mechanical resistance steel -45 - +250 C 4000 N/5 cm 55561 IK10 Elbows are fitted with a connector on one side. Varnished: smooth steel material to be varnished by both sides colour, medium corrosive resistance - g. 2 ZN: after steel bar welding hot-galvanized using immersion, zinc layer 50-100 µm, high corrosion resistance - g. 4. The elbows are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). description di R mm mm pcs varnished 6116E ECZ 16 M16x1,5 55 1; 15 85950576467 6120 ECZ 20 M20x1,5 70 1; 25 85950576474 6125 ECZ 25 M25x1,5 115 1; 25 85950576481 612 ECZ steel material painted on both sides 2 M2x1,5 125 1; 20 85950576498 6140 ECZ 40 M40x1,5 140 1; 15 859505764404 6150 ECZ 50 M50x1,5 170 1; 5 859505764411 616 ECZ 6 M6x1,5 210 1; 859505764428 ZN 6116E ZN F 16 M16x1,5 55 1; 15 85950576166 6120 ZN F 20 M20x1,5 70 1; 25 8595057617 6125 ZN F 25 M25x1,5 115 1; 25 85950576180 612 ZN F hot-dip galvanized 2 M2x1,5 125 1; 20 85950576197 6140 ZN F 40 M40x1,5 140 1; 15 85950576140 6150 ZN F 50 M50x1,5 170 1; 5 859505761410 616 ZN F 6 M6x1,5 210 1; 859505761670 Double-sided clamps for EN steel s steel ECZ - 456210 F - 456410 For attaching EN steel s to the pad. description D L a d mm mm mm mm mm pcs varnished 5220 PC ECZ 20 45 1; 100 859505761618 10 5225 PC ECZ 25 50 0,8 1; 100 859505761625 522 PC ECZ painted in on both 2 57 1; 100 85950576162 5, 5240 PC ECZ sides 40 70 1; 50 859505761649 12 5250 PC ECZ 50 85 1,1 1; 50 859505761656 526 PC ECZ 6 96 1; 50 85950576166 ZN 5220 PC ZN F 20 45 1; 100 859505764794 10 5225 PC ZN F 25 50 0,8 1; 100 859505764800 522 PC ZN F 2 57 1; 100 859505764817 hot-dip galvanized 5, 5240 PC ZN F 40 70 1; 50 859505764824 12 5250 PC ZN F 50 85 1,1 1; 50 85950576481 526 PC ZN F 6 96 1; 50 859505764848 material mechanical resistance classification code according to 6186-25 thread mechanical protection temperature resistance classification code according to 6186-1 functionality during a fire sheet metal thickness package

6 WIRING PIPES EN steel unthreaded s - high mechanical resistance steel -45 - +250 C 1250 N/5 cm 44561 IK10 The s are suitable for mechanical protection of conductors and cables. While using s along with bushing 4816E - 486 is scope of application only -5 - +60 C. ZNM: Sendzimir galvanized, zinc layer 15-27 µm, replaces shop primer, medium corrosive resistance - g. 2 Varnished ECZ: smooth steel material to be varnished by both sides colour, medium corrosive resistance - g. 2 Varnished EOZ: Sendzimir galvanized steel finished with powder technology, color, medium corrosive resistance - g. 2 ZN: after steel bar welding hot-galvanized using immersion, zinc layer 50-100 µm, high corrosion resistance - g. 4 dn di min. L description mm mm mm m m pg. ZNM 6220 ZNM S 20 15,8 1,0 0; 1200 8595568919625 6225 ZNM S 25 20,6 1,2 0; 600 8595568920409-2 Sendzimir galvanized -6 622 ZNM S 2 26,6 1,2 21; 420 859556892259-8 6240 ZNM S 40 4,4 1,2 15; 450 859556892745 varnished 6216E ECZ painted in on both sides 16 12,2 1,0 0; 1200 859505764299 6220 EOZ 20 15,8 1,0 0; 1200 8595568919618 6225 EOZ 25 20,6 1,2 0; 600 859556892086 painted in circumferentially 622 EOZ 2 26,6 1,2 21; 420 85955689227 6240 EOZ 40 4,4 1,2 15; 450 859556892776 6250 ECZ 50 4,8 1,2 15; 00 8595057644 painted in on both sides 626 ECZ 6 58,8 1,2 15; 150 85950576450 6216E ZN F ZN 16 12,2 1,0 0; 1200 859505764220 6220 ZN F 20 15,8 1,0 0; 1200 85950576427 6225 ZN F 25 20,6 1,2 0; 600 859505764244 622 ZN F hot-dip galvanized 2 26,6 1,2 21; 420 859505764251 6240 ZN F 40 4,4 1,2 15; 450 859505764268 6250 ZN F 50 4,8 1,2 15; 00 859505764275 626 ZN F 6 58,8 1,2 15; 150 859505764282-2 -6-8 -2-6 -8 Slide-on connectors for EN steel s steel IK10 The connectors are designed to join steel s and elbows for mechanical protection of cables or wires. Both ends are fitted with sockets. The connectors are manufactured from strip steel by welding. description di mm pcs varnished 16E/2 ECZ 16 1; 25 859505761427 20/2 ECZ 20 1; 50 85950576144 25/2 ECZ 25 1; 50 859505761441 2/2 ECZ painted in on both sides 2 1; 50 859505761458 40/2 ECZ 40 1; 25 859505761465 50/2 ECZ 50 1; 10 859505761472 6/2 ECZ 6 1; 5 859505761588 ZN or ZN-Ni 16E/2 ZN F 16 1; 25 859505764718 20/2 ZN F 20 1; 50 859505764725 25/2 ZN F 25 1; 50 85950576472 2/2 ZN F hot-dip galvanized or zinc - nickel coating 2 1; 50 859505764749 40/2 ZN F 40 1; 25 859505764756 50/2 ZN F 50 1; 10 85950576476 6/2 ZN F 6 1; 5 859505764770 material mechanical resistance wall thickness mechanical protection temperature resistance classification code according to 6186-1 package accessories

WIRING PIPES 7 Elbows for EN steel unthreaded s - high mechanical resistance steel -45 - +250 C 1250 N/5 cm 44561 IK10 Both ends are fitted with sockets. Varnished: smooth steel material to be varnished by both sides colour, medium corrosive resistance - g. 2 ZN: after steel bar welding hot-galvanized using immersion, zinc layer 50-100 µm, high corrosion resistance - g. 4. description di R mm mm pcs varnished 616E ECZ 16 55 1; 15 85950576450 620 ECZ 20 70 1; 25 859505764510 625 ECZ 25 115 1; 25 859505764527 62 ECZ steel material painted on both sides 2 125 1; 20 85950576454 640 ECZ 40 140 1; 15 859505764541 650 ECZ 50 170 1; 5 859505764558 66 ECZ 6 210 1; 859505764565 ZN 616E ZN F 16 55 1; 15 85950576445 620 ZN F 20 70 1; 25 859505764442 625 ZN F 25 115 1; 25 859505764459 62 ZN F hot-dip galvanized 2 125 1; 20 859505764466 640 ZN F 40 140 1; 15 85950576447 650 ZN F 50 170 1; 5 859505764480 66 ZN F 6 210 1; 859505764497 OMEGA clamps for EN steel s steel -60 - +250 C S - 456210 F - 456410 IK10 The clamps are designed to attach EN steel s to the pad. The clamps are also available for systems maintaining functionality during a fire (see catalogue Systems maintaining functionality during a fire). A di description dn mm mm mm pcs ZNM 5216E ZNM S 16 15-18 1; 100 8595057692084 5220 ZNM S 20 19-2 1; 100 8595057692091 5225 ZNM S Sendzimir 25 24-28 1; 100 8595057692107 6, x 9,8 522 ZNM S galvanized 2; 40 0-40 1; 100 8595057692114 5250 ZNM S 50 9-52 1; 50 859505769218 526 ZNM S 6 5-6 1; 50 8595057692145 ZN 5216E ZN F 16 15-19 1; 50 8595568915269 5220 ZN F 20 19-24 1; 50 8595568915276 5225 ZN F 25 24-29 1; 50 859556891528 522 ZN F hot-dip galvanized 2 6,1 x 9,8 29-8 1; 25 8595568915290 5240 ZN F 40 8-47 1; 20 859556891506 5250 ZN F 50 47-55 1; 20 85955689151 526 ZN F 6 55-6 1; 20 859556891520 material mechanical resistance classification code according to 6186-25 mechanical protection temperature resistance classification code according to 6186-1 functionality during a fire package

8 WIRING PIPES Straight gland for EN s - external PE -5 - +60 C 0 sec. The bushings are designed to mechanically protect the conductors or cables coming from the steel. Plug the bushing from outside on the end of before installing cables. dn di mm mm pcs 4816E KA 16 12 100; 000 8595057688575 4820 KA 20 16 100; 1200 8595057688582 4825 KA 25 21 100; 800 8595057688599 482 KA 2 28 50; 400 8595057688605 4840 KA 40 5 50; 200 8595057688612 4850 KA 50 4 25; 100 8595057688629 486 KA 6 57 10; 70 859505768866 Straight gland for ČSN steel s - external PE -5 - +60 C 0 sec. The bushings are designed to mechanically protect the conductors or cables coming from the steel. Plug the bushing from outside on the end of before installing cables. dn di mm mm pcs 481/P KB 20,4 15 100; 000 8595057604926 4816/P KB 22,5 16 100; 1200 85950576049 4821/P KB 28, 22 100; 1000 8595057604940 4829/P KB 7 0 100; 400 8595057604971 486/P KB 47 7 100; 00 8595057604988 4842/P KB 54 42 75; 150 8595057604995 Straight gland for ČSN steel s - internal PE -5 - +60 C 0 sec. The bushings are designed to mechanically protect the conductors or cables coming from the the steel. Plug the bushing from inside on the end of before installing cables. d1 d2 -inner Ø mm mm pcs 491 XX 1,5 18,2 100; 2500 859505765726 4916 XX 15,6 20, 100; 2000 859505765724 4921 XX 20,6 25,7 100; 1200 8595057657250 4929 XX 29,4 4,4 100; 700 8595057657267 496 XX 8,4 44 80; 400 8595057657274 4942 XX 45,5 51 60; 60 8595057657281 material temperature resistance self-snuffing package

WIRING PIPES 9 Aluminium seamless s - high mechanical resistance Al -45 - +250 C 1250 N/5 cm 44561 The s are proper for mechanical protection of conductors and cables. They can be used for industrial installations, high anticorrosive ability class 4. dn di L mm mm m m 6216E AL XX 16 14 0; 1800 859505765771 6220 AL XX 20 18 0; 1200 8595057657748 6225 AL XX 25 2 0; 750 8595057657755 622 AL XX 2 0 0; 480 8595057657762 6240 AL XX 40 8 15; 00 8595057657779 6250 AL XX 50 47 15; 180 8595057657786 626 AL XX 6 59,8 15; 120 859505765779 Slip-on couplers for aluminium s Al The connectors are designed to join aluminium s for mechanical protection of cables or wires. Both ends are fitted with sockets. di mm pcs 16E/2 AL XX 16 1; 50 8595057657878 20/2 AL XX 20 1; 50 8595057657885 25/2 AL XX 25 1; 50 8595057657892 2/2 AL XX 2 1; 50 8595057657908 40/2 AL XX 40 1; 20 8595057657915 50/2 AL XX 50 1; 20 8595057657922 6/2 AL XX 6 1; 25 859505765799 Elbows for aluminium s - high mechanical resistance Al -45 - +250 C 1250 N/5 cm 44561 Both ends are fitted with sockets. di R mm mm pcs 616E AL XX 16 55 1; 25 8595057657809 620 AL XX 20 70 1; 25 8595057657816 625 AL XX 25 115 1; 25 859505765782 62 AL XX 2 125 1; 20 859505765780 640 AL XX 40 140 1; 15 8595057657847 650 AL XX 50 170 1; 5 8595057657854 66 AL XX 6 210 1; 8595057657861 material mechanical resistance package temperature resistance classification code according to 6186-1

40 WIRING PIPES Aluminium clamps OMEGA Al -45 - +250 C 456410 For attaching aluminium s to the pad. To facilitate mounting, the clamp is provided with a groove for insertion; during mounting, it is not required to completely separate the top part of the clamp. D dn mm mm pcs 5216E AL XX 16 1; 50 8595057689725 5220 AL XX 20 1; 50 859505768972 5225 AL XX 25 1; 50 8595057689749 522 AL XX 2 6,4 1; 25 8595057689756 5240 AL XX 40 1; 25 859505768976 5250 AL XX 50 1; 25 8595057689770 526 AL XX 6 1; 20 8595057689787 Aluminium clamps Al -45 - +250 C For attaching aluminium s to the pad. Pipes are installed by pushing between the clamp jaws. dn d mm mm pcs 5216E PC AL XX 16 1; 50 8595057688650 5220 PC AL XX 20 1; 50 8595057688667 5225 PC AL XX 25 1; 50 8595057688674 522 PC AL XX 2 6,4 1; 50 8595057688681 5240 PC AL XX 40 1; 25 8595057688698 5250 PC AL XX 50 1; 25 8595057688704 526 PC AL XX 6 1; 5 8595057688711 Corrosion protection for galvanized surfaces Corrosion protection for repair of defective and damaged places on galvanized surfaces. The colour is applied with a brush, stippling technique. description pcs GZS XX spray 1 85950576148 WEICON 75 XX 1 859505762118 color WEICON 750 XX 1 859505769609 material classification code according to 6186-25 temperature resistance package

WIRING PIPES 41 Flexible metal steel -45 - +90 C 750 N/5 cm 522 The s are suitable for mechanical protection of conductors and cables inside halls (indoor). The s are made of galvanized steel bar at the top (zinc layer - 4 µm) and isolation layer inside. Flexible metal s may be connected to steel threaded s by means of couplings of 98xx series. 1 16 2 29 6 48 dn di min. mm mm m B 10 8595057655850 18,9 1,5 XX 100 859505760420 B 10 8595057655867 21,4 16 XX 100 8595057604247 B 10 8595057655874 28,9 2 XX 50 8595057604254 B 10 8595057655881 5,2 29 XX 50 8595057604261 B 10 8595057655898 4 6 XX 25 8595057604278 B 10 8595057655904 54,9 48 XX 25 8595057604292 Couplers for flexible metal s Al The couplers are designed to join flexible metal s using inner clipping nick. While stocks last. dn L mm mm pcs 961 XX 18,9 0 10; 540 8595057604568 Double-sided clamps steel 456210 The clamps are designed to attach flexible metal s to the pad. description D L a d mm mm mm mm mm pcs 61 A S 18,5 40,5 100; 100 8595057604629 616 A S 20,9 46,9 10 0,8 4, 100; 1100 859505760466 62 A S 28, 55, 100; 800 859505760464 Sendzimir galvanized 629 A S 4,5 67,5 50; 50 8595057604650 66 A S 42,2 82,2 15 1,1 5, 50; 200 8595057604667 648 A S 54,0 95,0 50; 150 8595057604674 material mechanical resistance classification code according to 6186-25 package temperature resistance classification code according to 6186-1 sheet metal thickness

42 WIRING PIPES KOPODREN - drainage PE KOPODREN line is used in all areas of drain technics, e.g. draining of buildings, deep engineering constructions, sport places building, in agriculture, gardens, to drain areas of use, or to temporary draining of work sites. The s have low weight and high chemical resistance. The construction of the ensures high flexibility. This is a major advantage when installing as well as meeting the requirement of small bend radius. The joints are protected against pull-off and are designed to join using a snap. dn L mm m KOPODREN 50 F50 50 50 8595568926654 KOPODREN 65 F50 65 50 8595568926661 KOPODREN 80 F50 80 50 8595568926678 KOPODREN 100 F50 100 50 8595568926685 KOPODREN 125 F50 125,5 50 8595568926692 KOPODREN 160 F50 159,5 50 8595568926708 KOPODREN drainage accessories connectors T joints reducers 90 elbows dn mm 50 KN-S 50 859505762260 KN-T 50 859505762291 KN-R 65/50 8595057622579 65 KN-S 65 8595057622647 KN-T 65 8595057622920 KN-R 80/65 8595057622586 80 KN-S 80 8595057622654 KN-T 80 859505762297 KN-R 100/80 859505762259 KN-K90 80 8595057622869 100 KN-S 100 8595057622661 KN-T 100 8595057622944 KN-R 125/100 8595057622609 KN-K90 100 8595057622876 125,5 KN-S 125 8595057622678 KN-T 125 8595057622951 KN-R 160/125 8595057622616 KN-K90 125 859505762288 159,5 KN-S 160 8595057622685 KN-T 160 8595057622968 KN-K90 160 8595057622890 end flaps plugs 45 branches 90 bends dn mm 50 KN-KK 50 859505762057 KN-Z 50 8595057622982 KN-OD45 50 8595057622708 KN-OB90 50 8595057622777 65 KN-KK 65 859505762064 KN-Z 65 8595057622999 KN-OD45 65 8595057622715 KN-OB90 65 8595057622784 80 KN-KK 80 859505762071 KN-Z 80 859505762002 KN-OD45 80 8595057622722 KN-OB90 80 8595057622791 100 KN-KK 100 859505762088 KN-Z 100 859505762019 KN-OD45 100 859505762279 KN-OB90 100 8595057622807 125,5 KN-KK 125 859505762095 KN-Z 125 859505762026 KN-OD45 125 8595057622746 159,5 KN-KK 160 859505762101 KN-Z 160 8595057620 KN-OD45 160 859505762275 All accessories for drainage s KOPODREN available upon order. material color

WIRING PIPES 4 Wiring s - number of cables to put in CYKY 2 x 1,5 CYKY x 1,5 CYKY 4 x 1,5 CYKY x 2,5 CYKY 5 x 1,5 CYKY 4 x 2,5 CYKY 5 x 2,5 cable diameter (mm) 6 8, 8,7 9,5 10 10, 10,9 12, 1,2 14,4 14,4 16 FLEXIBLE PIPES XX16E - EN 1 1 1 X X X X X X X X X XX20 - EN 2 () 1 1 1 1 1 1 X X X X X XX25 - EN 4 2 2 1 1 1 1 1 1 1 1 X XX2 - EN 8 4 4 2 1 1 1 1 1 XX40 - EN 1 7 6 5 5 4 4 2 2 1 XX50 - EN 21 11 10 8 7 7 6 5 4 4 4 XX1 - ČSN 2 1 1 1 1 1 1 X X X X X XX16 - ČSN 1 (2) 1 1 1 1 1 1 1 X X X XX2 - ČSN 7 4 2 2 1 (2) 1 1 1 1 1 XX29 - ČSN 11 6 5 4 4 4 2 1 1 1 XX6 - ČSN 17 9 8 7 6 6 5 4 2 SF16 1 1 1 1 1 1 1 1 X X X SF20 5 2 1 (2) 1 1 1 1 1 1 1 1 SF25 8 4 4 2 () 1 (2) 1 1 1 1 SF2 1 7 6 5 5 5 4 2 () 2 () 1 (2) KF 09040 1 7 6 5 5 5 4 2 2 2 KF 09050 22 11 10 9 8 7 7 5 5 4 4 KF 0906 5 18 17 14 1 12 11 8 7 6 6 5 KF 09075 49 25 2 19 18 17 15 12 10 8 8 7 KF 09090 74 8 5 29 27 25 22 18 15 1 1 10 KF 09110 116 60 55 46 42 9 5 28 24 20 20 16 KF 09125 15 80 7 61 55 52 46 6 2 27 27 21 KF 09160 242 127 115 97 87 82 7 58 50 42 42 4 KF 09200 401 209 191 160 144 16 121 95 8 70 70 56 RIGID PIPES XX16E - EN 1 (2) 1 1 1 1 1 X X X X X X XX20 - EN 2 () 1 1 1 1 1 1 1 1 X X X XX25 - EN 6 2 1 (2) 1 (2) 1 1 1 1 1 1 XX2 - EN 9 5 4 4 2 2 1 1 1 1 XX40 - EN 15 8 7 6 6 5 5 4 1 (2) XX50 - EN 24 1 12 10 9 8 7 6 5 4 4 XX6 - EN 4 22 20 17 15 14 1 10 9 7 7 6 601 - ČSN 4 2 1 (2) 1 1 1 1 1 1 1 1 X 6016 - ČSN 2 () 1 (2) 1 1 1 1 1 1 1 1 6021 - ČSN 9 5 4 1 (2) 1 1 1 1 6029 - ČSN 15 8 7 6 6 5 5 4 2 606 - ČSN 25 1 12 10 9 9 8 6 5 4 4 4 6042 - ČSN 4 18 16 14 12 12 10 8 7 6 6 5 6016E - EN 1 1 1 1 1 1 1 X X X X 6020 - EN 4 2 1 (2) 1 1 1 1 1 1 1 1 X 6025 - EN 7 2 2 1 1 1 1 1 1 602 - EN 11 6 5 5 4 4 2 1 1 1 6040 - EN 19 10 9 7 7 6 6 4 4 6050 - EN 0 15 14 12 11 10 9 7 6 5 5 4 606 - EN 48 25 2 19 17 16 15 11 10 8 8 7 KD 09040 1 7 6 5 5 5 4 2 2 2 KD 09050 22 11 10 9 8 7 7 5 5 4 4 KD 0906 5 18 17 14 1 12 11 8 7 6 6 5 KD 09075 49 25 2 19 18 17 15 12 10 8 8 7 KD 09090 74 8 5 29 27 25 22 18 15 1 1 10 KD 09110 116 60 55 46 42 9 5 28 24 20 20 16 KD 09125 15 80 7 61 55 52 46 6 2 27 27 21 KD 09160 242 127 115 97 87 82 7 58 50 42 42 4 KD 09200 401 209 191 160 144 16 121 95 8 70 70 56 The table is based on 60% cross-section usage of the s. CYKY 4 x 4 CYKY 5 x 4 CYKY 4 x 6 CYKY 5 x 6