Project: Fixture Type: Location: H7..A LED UP TO 7W Contact/Phone: PRODUCT DESCRIPTION The ultimate in stylish lighting design, the Alari LED luminaire provides a graceful transition from ground to sky. Packed with premium features like high performance optics, high transmission glass, and tool-less access for wiring and maintenance, the Alari LED is specifically designed for high profile area lighting applications where luminaire style, energy efficiency, and low maintenance/installation costs are desired. PRODUCT SPECIFICATIONS Optics Precision engineered acrylic TIR LED optics ensure superb light control, high light levels, and superior uniformity AccuLite s high transmission (97%) glass lens is optional to increase luminaire efficacy Available with multiple beam spreads All beam spreads are FULL CUT-OFF, dark sky friendly Mounting Square pole mounted with a fast and simple two bolt keyhole mounting arrangement Accessories are available for round pole, post top, mast arm, and wall mounting Tool-less access to the wiring compartment. Construction Die cast aluminum housing, door, and latch Stainless steel external hardware Removable hinged door Power tray driver mounting system allows easy access to the drivers Tether cable stops the door before it can hit the pole in the open position Optional high transmission (97%) tempered glass lens Lens is held in place with hardware for easy replacement in case of breakage Aluminum LED heat sink assembly. LED Thermal Management Alari LED luminaires are equipped with a machined aluminum heat sink that creates a strong bond between the LED arrays and the aluminum housing, thus utilizing the entire mass and surface area of the luminaire as a heat sink. This reduces LED operating temperature and increases LED life. Cat. No.: Accessories: Electrical The is equipped with class drivers Depending on the voltage required drivers will have a universal voltage input of -77VAC or 47-48VAC Drivers have an internal surge protection of KV Maximum THD % Minimum power factor.9 Fixture includes an additional surge protector that protects line-ground, line-neutral, and neutral-ground in accordance with IEEE/ANSI C6.4. guidelines with a surge current rating of, amps. Dimming Fixtures can be ordered with an optional -V dimming driver. Wireless Control Receptacle Alari fixtures can be supplied with a 7-pin receptacle for wireless controls adapters per ANSI-C6--. Finish Baked polyester powder coat Corporate colors are available Certifications Meets UL98/CSA C. standards Suitable for wet locations Union made Assembled in the USA Meets Buy American Act year limited warranty. DIMENSIONS H EPA L W H Weight A Series. ft 8 /8 7 9/6 lb. L W Ø 7/6 (x) Ø MIN -/ LED PERFORMANCE (4K or K CCT, min CRI 7) Catalog Number Distribution Delivered Input Voltage Watts Efficacy A-B-4K-UN- Type II 4,9 7 8 A-B-4K-UN- Type II,8 8 A-B6-4K-UN- Type II 6,8 7 8 A-B-4K-UN- Type III,79 7 7 A-B-4K-UN- Type III, 76 A-B6-4K-UN- Type III,48 7 74 A-B-4K-UN-FT Forward Throw,748 7 68 A-B-4K-UN-FT Forward Throw 9, 7 A-B6-4K-UN-FT Forward Throw,7 7 69 A-B-4K-UN- Type V,7 7 76 A-B-4K-UN- Type V,68 79 A-B6-4K-UN- Type V,6 7 77 For K CCT use a.9 multiplier. REV-8/
H7..A LED UP TO 7W PRODUCT CODES Series Lamp Wattage/Type CCT Voltage Distribution Options A- B6-4K -E7 - -HT A- Alari Medium Housing B6 7W LED B W LED B 7W LED ACCESSORIES (Order separately) Description Catalog # Wall Mount Bracket Round Pole Adapter Fits to 4 pole Fits to 6 pole STANDARD -4K 4K, 7 CRI -K K, 7 CRI OPTIONAL -K K, 7 CRI A-WMB-color A-RPA4-color A-RPA6-color Post Top Adapter A-PTF-color Fits IPS (-/8 o.d.) and -/ IPS (-7/8 o.d.) tenons. Mast Arm Adapter Fits mast arm External House Side Shield Polycarbonate Guard A-MAA-color A-HS A-LS -UN V thru 77V -UH 47V thru 48V -E V -E 8V -E4 4V -E7 77V -E4 47V -E48 48V - IES Type II - IES Type III - IES Type V -FT Forward Throw PREDICTED LED LUMEN DEPRECIATION Ambient Temperature ( C) L 7, Hours ºC >6, L7 is the predicted time when LED performance depreciates to 7 initial lumen output. It is calculated using IESND TM- guidelines and limited to 6 times the actual LED test hours. Predicted performance is calculated from LED manufacturer s data and engineering design estimates based on IESNA LM-8 methodology. Actual experience may vary due to field application conditions. -HT -PC -WR High Transmission Glass Photo control (Must indicate dedicated voltage suffix) Wireless Controls Receptacle per ANSI-C6-- (must indicate dedicated voltage suffix -F Fuse for V, 77V, 47V (Must indicate dedicated voltage suffix) -F Fuse for 8V, 4V, 48V (Must indicate dedicated voltage suffix) -D -V DC dimming driver -BL -SL -WH no suffix Black finish Silver finish White finish Bronze finish PHOTOMETRY A-B-4K-UN- Total : 4,9 A-B-4K-UN- Total :,79 A-B-4K-UN-FT Total :,748 A-B-4K-UN- Total :,7 All tests were performed according to IES LM-79-8 Forward Light,9 7.7%,8 8.4%,669 9.8% 6,6.4% FL ( - ),6 6.4%,.8%,47.4% 76 % FM ( -6 ),86 4.% 6,84.8% 6,77 7.%,64.% FH (6-8 ),977.9%,4 9.%,4.7%,78.% FVH (8-9 ) 9.%.4% %.4% Back Light 4,7 8.%,88 4.6%,79 9.% 6, 49.6% BL ( - ),9 9.% 9.%.7% 76 % BM ( -6 ),889.%,9 8.6% 6.%,998.8% BH (6-8 ) 87.7% 66.9%.%,7.% BVH (8-9 ).%.% 4.% 48.4% Up Light.%.%.%.% UL (9 - ).%.%.%.% UH ( -8 ).%.%.%.% BUG Rating B-U-G B-U-G B-U-G B4-U-G S. Wolf Road Des Plaines, IL 68 Phone (847) 87-988 Fax (847) 87-9 Chrysler Drive Brampton, Ontario Canada L6S 6B6 Phone (9) 79-7 Fax (9) 79-64 Printed in U.S.A. 6 Acuity Brands Lighting, Inc.
H7..A LED UP TO 7W PHOTOMETRY (Continued) A-B-4K-UN- A-B-4K-UN- A-B-4K-UN-FT A-B-4K-UN- Total :,8 Total :, Total : 9, Total :,68 All tests were performed according to IES LM-79-8 Forward Light 8,69 7.7% 8,8 8.4% 8,66 9.8%,7.4% FL ( - ),89 6.4%,9.8%,8.4% 89 % FM ( -6 ) 4,7 4.%,.8%,48 7.%,486.% FH (6-8 ),64.9%,99 9.%,97.7%,8.% FVH (8-9 ).% 4.4% 4 % 4.4% Back Light,9 8.%,8 4.6% 876 9.%,8 49.6% BL ( - ),6 9.% 6.% 6.7% 8 % BM ( -6 ),.% 884 8.6%.%,4.8% BH (6-8 ) 6.7% 97.9% 7.%,.% BVH (8-9 ).%.%.% 9.4% Up Light.%.%.%.% UL (9 - ).%.%.%.% UH ( -8 ).%.%.%.% BUG Rating B-U-G B-U-G B-U-G B-U-G A-B6-4K-UN- A-B6-4K-UN- A-B6-4K-UN-FT A-B6-4K-UN- Total : 6,8 Total :,48 Total :,7 Total :,6 All tests were performed according to IES LM-79-8 Forward Light 4,6 7.7% 4,64 8.4% 4,6 9.8%,84.4% FL ( - ) 999 6.4% 64.8% 6.4% % FM ( -6 ),8 4.%,98.8%,878 7.%,.% FH (6-8 ) 846.9%,49 9.%,4.7%,9.% FVH (8-9 ) 8.%.4% %.4% Back Light,79 8.% 79 4.6% 46 9.%,787 49.6% BL ( - ) 6 9.% 67.% 7.7% 6 % BM ( -6 ) 88.% 466 8.6% 66.%,8.8% BH (6-8 ) 4.7% 7.9% 6.%,78.% BVH (8-9 ).%.%.%.4% Up Light.%.%.%.% UL (9 - ).%.%.%.% UH ( -8 ).%.%.%.% BUG Rating B-U-G B-U-G B-U-G B-U-G S. Wolf Road Des Plaines, IL 68 Phone (847) 87-988 Fax (847) 87-9 Chrysler Drive Brampton, Ontario Canada L6S 6B6 Phone (9) 79-7 Fax (9) 79-64 Printed in U.S.A. 6 Acuity Brands Lighting, Inc.
H7..A.... A-B-4K-UN- Light Loss Factor =. = 49 Mounting Height =. Ft Maximum Calculated Value = 4 Fc A-B-4K-UN- with AHSS SHIELD Light Loss Factor =. = 999 Mounting Height =. Ft Maximum Calculated Value = 4.7 Fc.... A-B-4K-UN- Light Loss Factor =. = 79 Mounting Height =. Ft Maximum Calculated Value = 9.44 Fc A-B-4K-UN- with AHSS SHIELD Light Loss Factor =. = 68 Mounting Height =. Ft Maximum Calculated Value = 9.4 Fc S. Wolf Road Des Plaines, IL 68 Phone (847) 87-988 Fax (847) 87-9 Chrysler Drive Brampton, Ontario Canada L6S 6B6 Phone (9) 79-7 Fax (9) 79-64 Printed in U.S.A. 6 Acuity Brands Lighting, Inc.
H7..A.... A-B-4K-UN-FT Light Loss Factor =. = 748 Mounting Height =. Ft Maximum Calculated Value = 9. Fc A-B-4K-UN-FT with AHSS SHIELD Light Loss Factor =. = 66 Mounting Height =. Ft Maximum Calculated Value = 9. Fc.... A-B-4K-UN- Light Loss Factor =. = 7 Mounting Height =. Ft Maximum Calculated Value =.86 Fc A-B-4K-UN- with AHSS SHIELD Light Loss Factor =. = 896 Mounting Height =. Ft Maximum Calculated Value =.7 Fc S. Wolf Road Des Plaines, IL 68 Phone (847) 87-988 Fax (847) 87-9 Chrysler Drive Brampton, Ontario Canada L6S 6B6 Phone (9) 79-7 Fax (9) 79-64 Printed in U.S.A. 6 Acuity Brands Lighting, Inc.