DIGI-MET ELECTRONIC INDICATORS Featuring Direct RS232C Output And Swiss SYLVAC Electronics. A sophisticated non-contact linear measuring system... can be connected to any computer or printer with no interface necessary. Featuring.00005 (0,001mm) Resolution with ±.0001 Accuracy; Repeatability: 0,002mm/.0001 ±2s. FEATURES: AGD Group 2, 8mm stem with 3 /8 bushing adaptor. Rugged Polyamid housing. Stainless shank and spindle. Tracking Speed: 60 /second. Display rotates 270. Top lifting knob. Measuring force: 0.6-1.1N. Low Drain Lithium Battery: 4500 continuous on time or 2-3 years with on/off switch. EXTRA-LARGE DIGITAL DISPLAY FOR EASY READING! FUNCTIONS: Direct inch/metric conversion. Zero-setting at every point. HOLD - function. PRESET - function with dual measuring references to ±99.99999. Incremental floating zero. If tool is used for SPC, the zero button can automatically be configured as a data I/O switch. FREE RS232C Opto Electronic Output. INCLUDES CERTIFICATE OF CALIBRATION TRACEABLE TO N.I.S.T. Four Measuring Ranges Available: Up to 4 (100mm) No. Description 18318 DIGI-MET Electronic Indicator with 0-1 (0-25mm range) 18319 DIGI-MET Electronic Indicator with 0-1/2 (0-12.5mm range) 18530 DIGI-MET Electronic Indicator with 0-2 (0-50mm range) 18531 DIGI-MET Electronic Indicator with 0-4 (0-100mm range) Accessories 18517 Lugback attachment for DIGI-MET Indicators 18518 Lifting lever for models 18318 & 18319 18317 Replacement Lithium Battery, 3V 18315 Direct RS232C Opto-Electric Output Cable for all DIGI-MET direct output gaging: includes 80 connecting cable with 9 pin IBM RS232 connector DIGI-MET MULTI-MODE ELECTRONIC INDICATORS Preisser introduces the next generation of Digi-Met Indicators: NEW DIGI-MET MULTI-MODE TOLERANCE SIGNAL LIGHTS FEATURES: MIN/MAX/TIR Modes Tolerance Signal Lights Selectable Resolution Bidirectional RS-232 Output Preset Recall FREE INCLUDES CERTIFICATE OF CALIBRATION TRACEABLE TO N.I.S.T..00005 (.001mm) resolution AGD Group 2 specifications, 8mm stem with 3/8 bushing adaptor Display face rotates 270 for easy viewing Two presets with preset recall Floating zero Accuracy.00008 ±2s (.002mm±2s) Repeatability.0002 (.005mm) No. 18515, DIGI-MET Multi-Mode Indicator with 0-1 (25mm) range No. 18516, DIGI-MET Multi-Mode Indicator with 0-½ (12.5mm) range Accessories: Please refer to above. - 101 -
FLEXBAR DIGITAL ELECTRONIC INDICATOR New Improved Featuring Extra Large Display A Quality General Purpose Indicator At An Affordable Price. 0-1 /0-25mm Range Inch/Metric Conversion.0005 /.01mm Resolution Zero Setting REL/ABS Conversion Extra Large Character Height (12.7mm) Battery: 1 Silver Oxide SR44, 1.5v On/Off Button 3/8 Diameter Stem Flat Back RS-232 Interface (Data Output) Includes Fitted Wooden Case No. 15830, 0-1 /25mm Electronic Indicator No. 15831, Replacement Battery FLEXBAR ELECTRONIC DIGITAL DEPTH GAGE SET Includes No. 15830 Digital Indicator (see above) Measuring range 0-10 Graduations:.0005 /.01mm Available with 2½ or 4 wide base Uniform pressure over full range of travel Complete with 6 extension rods in fitted case Provides convenient and rapid measurement of bore depths. No. 15915, Flexbar Electronic Digital Depth Gage Set with 2½ wide base No. 15916, Flexbar Electronic Digital Depth Gage Set with 4 wide base Millitast Electronic Digital Indicator A Basic Function Digital Indicator Including Preset at an Economical Price Featuring: Opto RS232C or Digimatic Data Output Includes One Preset On/Off Zero Setting mm/inch Flat Back High Contrast 8.5mm Liquid Crystal Display 8mm Stem with 3/8 Bushing IP51 Protection Measuring Range: + 12.5mm/+.5in. Resolution: 0.01mm/.0005in. Accuracy:.05mm/.0002in. Measuring Force (N): 0.6-1.1 No. 15419, Millitest Electronic Digital Indicator. FLEXBAR MICRO-MAXUM Digital Electronic Indicator A FULL FUNCTION, RUGGED YET ECONOMICAL ELECTRONIC INDICATOR SUITABLE FOR HIGH PRODUCTION MEASUREMENTS. MAIN FEATURES INCLUDE: Highly visible - easy reading display with high resolution and analog bar graph. Shows deviation from zero or a preset value. Lightweight, rugged gasketed case, crystal and stem resists fluid contamination. Auto power down for low battery consumption and long life..00005"/0.001mm resolution. Inch/Metric selectable. Normal/Reverse Sensing. Preset capabilities. Calibratable. SPC Data Output - 2 Formats. No. Resolution Stem Diameter Stem Length 15350.00005 /0.001mm.375.46 15351.00005 /0.001mm.375 1.5 15352.00005 /0.001mm 8mm 11.7mm 15355 Replacement Lithium Battery (2 required) 15356 Mating Connector for data output 15357 Flat Back 15358 Post Back 15359 Screw Back RANGE AND RESOLUTION: Range Resolution Accuracy (% of Digital Range) Spindle -.050 /+.060 (-1.28/+1.5mm) Display Inch ±.040.00005 ±1.0% over ±.040 ±0.5% over ±.020 Metric ±1.0mm 0.001mm ±1.0% over ±1.00mm ±0.5% over ±0.50mm Repeatability ± 1 digit. Gaging Force 3-4 oz./.85-112g (at center of spindle travel). Power 3 volt lithium coin cell (2 per unit, consumer type, CR 2450) Battery Life Six months normal usage or 2000 hours. Weight Approx. 6 oz./170g. - 102 -
waterproof/shockproof dial indicators IP67 Protection Class-Hermetically Sealed Against Oil, Water, Mist and Dust Features: A flexible rubber bellows is fitted where the spindle enters the stem. The upper end of the measuring spindle is sealed by a safety cap and and O ring. A new design of the metal bezel and its assembly produces a perfect seal. Its special features include O rings, flat glasses and a screwed-on brass ring. Additional Waterproof/Shockproof models available upon request. Accessories: No. 20269, Lugback for AGD-1 s No. 20277, Flatback for AGD-2 s Metric Dial Gauge M 2 SW waterproof, shockproof Reading 0,01 mm Range 10 mm Range per revolution 1 mm Bezel-Ø 61,5 mm Stem-Ø 8 h 6 Dimensions and accuracy according NEW to DIN 878 Spindle LOWER PRICES! Lapped Dimensioned drawing Supplied on request FLEXBAR-COMPAC DIAL INDICATORS Important Features: Shockproof system - protects movement Stainless, hardened and ground steel rack Dull chrome plated case Stem diameter: 8mm stainless (hardened and ground) with 3/8 bushing adaptor Shown: No. 20270 Made in Germany An additional O ring is placed between the rotating outer ring and the indicator s metal housing. The back plate is fitted in such a way that no foreign matter can enter. Effective shockproof system. 360 Rotatable bezel. Available in Inch & Metric s: No. 14880 Inch Dial Gauge Z3 SNW waterproof, shockproof Reading.0005 Range.400 Range per revolution.050 Bezel-Ø 2 27/64 Stem-Ø 3/8 Dimensions and accuracy according to ANSI Spindle Lapped Dimensioned drawing Supplied on request No. 14881 Highest Quality - Swiss Made Rotating dial, clockwise reading with bezel lock Revolution counter on all models Adjustable tolerance indicators Interchangeable contact points with M2,5 threading. (Metric/Inch conversion point available, see page 106.) AVAILABLE IN AGD-1 AND AGD-2 MODELS IN BOTH INCH AND METRIC. SPLASHPROOF MODELS AVAILABLE AS INDICATED (*) AGD-1 MODELS FLEXBAR COMPAC MEAS. RANGE READING GRADUATION NO. NO. RANGE PER REV. 20260 354AB.200.020 0-40.0005 *20261 354AE.200.020 0-40.0005 20262 355AB.120.010 0-100.0001 20263 *20265 353B 355AE 5mm.120 0,5mm.010 0-50 0-100 0,01mm.0001 AGD-2 MODELS: 20270 533AB.400.050 0-100.0005 20271 555AB.200.010 0-100.0001 *12091 533AE.400.050 0-100.0005 *Splashproof models No. 20278, Lugback for AGD-2 s - 103 -
Black Face PREMIUM QUALITY PRECISION DIAL INDICATORS - AGD 2 Made in Japan Features Extremely Smooth Precision Gears INCH AND METRIC MODELS OTHER FEATURES: Contact point made of tool steel, hardened ground and chrome plated. Stem made of stainless steel with a high strength is malfunction-free due to fastening. Micro-fine graduation for easy reading. Adjustable bezel for convenient zero setting with clamp screw continuous dial. 12742-B 12741 Tolerance pointers standard Satin chrome finish. 12740 AGD 2 style with central lug back. AGD GROUP 2 No. Range Reading Graduation 12740.500 0-100.001 12741.500 0-50-0.001 12742 1.000 0-100.001 12742-B 1.000 0-100.001 12746 1.000 0-50-0.001 12743 2.000 0-100.001 12747.250 0-25-0.0005 12744.050 0-10.0001 12745.050 0-5-0.0001 12748 1mm 0-100-0 0,001mm 12749 20mm 0-100 0,01mm No. 12738, Lifting Lever for AGD 2 Indicators No. 12739, Flat Back for AGD Group 2 Indicators 12743 12745 12744 PRECISION DIAL INDICATORS - AGD1 SAME FEATURES AS AGD INDICATORS ABOVE PREMIUM QUALITY-Made in Japan MODEL NO. 12855 12856 12857 RANGE.250.250 5mm READING 0-100 0-50-0 0-100 No. 12858, Flat Back for AGD Group 1 Indicators GRADUATION.001.001 0.01mm REVOLUTION COUNTER - - YES - 104 -
FLEXBAR PRECISION DIAL INDICATORS- AGD2 Each Face Has Dual Scale Continuous & Balanced. Inch and Metric s Available. SPECIFICATIONS AND QUALITY FEATURES: Tolerance pointers standard Bearings made from special brass. Bezel clamp standard. Lug Back is integral with case. Constant measuring pressure return spring lever. Hardened and lapped pinions. NOW AVAILABLE IN Stainless steel hardened stem. 2" TRAVEL MODELS Superfinished stainless steel rack spindle. Revolution counter on face. Rotatable Bezel with positive clamp for zero setting. Unbreakable crystal. All parts interchangeable. Totally enclosed case protects movement from dust and oil. Meets or Exceeds AGD Specifications No. Graduations Range Dual Scale Dia. Stem Mounting 11998.0005 1 0-100 3/8 Central Lug ¼ dia. Hole 12001.001 1 0-100 3/8 Central Lug ¼ dia. Hole 12003.001.500 0-100 3/8 Central Lug ¼ dia. Hole 12005.01mm 20mm 0-100 8mm Central Lug ¼ dia. Hole 12038.001 2 0-100 3/8 Central Lug ¼ dia. Hole DIAL comparator gages Available in a Choice of Ranges/Resolutions Featuring: Large, easy-to-read dial. Constant measuring force. Self-contained, shockproof movement. Box design housing. Made in Germany Jeweled bearings, precision ground gears and pinions. 8mm stem diameter includes 9.5mm/.375in bushing for mounting to US Standards. Measuring Range Resolution/Min. Graduation Overtravel Measuring Force Accuracy Millimess Series: 12625 ±50µm 1µm 2.8mm 1N ±1µm 12626 ±.0020in.00005.11in 1N ±.00005in Zentimess Series: 12627 ±25µm 0.01mm 2.5mm 1N ±7µm 12628 ±.0100in.0005in.10in 1N ±.000035in Compramess Series: 12629 ±0.13µm 5µm 2.5mm 1N(100p) ±3.5µm 12630 ±.0050in.0001in.10in 1N(100p) ±.00001in - 105 -
INDIVIDUAL DIAL INDICATOR POINTS The same quality points that make up our deluxe indicator point sets. Available from stock with standard inch AGD 4-48 threads. Our Metric-to-English Conversion Point. No. 17350 (see bottom of page) allows the use of any of the below points to be used with metric (M2.5 x 0.45 thread) indicators. TYPE LENGTH INCH ORDER NO. FLAT 0.175 18570 FLAT 0.250 18571 FLAT 0.385 18572 FLAT 0.500 18573 FLAT 0.625 18574 FLAT 0.750 18575 FLAT 0.875 18576 FLAT 0.895 18577 FLAT 1.250 18578 BALL 0.225 18579 BALL 0.395 18580 BALL 0.625 18581 BALL 0.875 18582 BALL 0.825 18583 INDICATOR POINT KITS Contains a selection of contact points in styles of half round, flat, bent, soft, long stem, taper and ball type, in all popular lengths. A.G.D. Specification 4-48 thread. Set No. 17260, 22 pc Indicator Point Kit Set No. 18614, 11 pc Indicator Point Kit SPECIAL INDICATOR CONTACTS DESCRIPTION MODEL NO. Radius Contact 18566 Chisel Point Contact 18567 Offset Chisel Point Contact 18568 1/8 Dia. Steel 18592 1/8 Dia. Carbide 18593 ¼ Dia. Steel 18594 5/16 Dia. Cone Point 18595 1/16 Needle Stud Contact 18596 Roller Anvil Contact 3/8 Roller 18597 Hardened Steel - Black Oxide Finish TYPE LENGTH INCH ORDER NO. CONICAL 0.875 18584 CONICAL 0.750 18585 CONICAL 0.625 18586 CONICAL 0.500 18587 STEM (Bent) 0.312 18588 STEM 1.025 18589 (Measuring Tip-.120 Length) STEM 1.025 18590 (Measuring Tip-.250 Length) STEM 1.160 18591 TAPERED CONTACTS Hardened Steel with Black Oxide Plating. A.G.D. 4-48 threads. No. Length 18615 13 /32" 18616 1" 18617 1 1 /2" 18618 2" INDICATOR POINT EXTENSIONS Hardened Steel with Black Oxide Plating. A.G.D. 4-48 Thread. No. Length No. Length 17262 ½ 17267 1 ¾ 17263 ¾ 17268 2 17264 1 17269 3 17265 1 ¼ 17825 4 17266 1 ½ 17826 6 No. 17350-106 -
Has 4-48 Thread FLEXBAR INDICATOR PIN VISE ACCESSORY 18560 Allows any A.G.D. dial indicator to hold any diameter probe, needle, etc. 0 to.040" capacity. Uses standard 4-48 thread for easy mounting to indicator spindle. No. 18560 Pin Vise Accessory for Dial Indicators CARBIDE AND RUBY BALL PRECISION INDICATOR CONTACT TIPS Precision contact tips manufactured for use on standard drop style dial indicators. Available with Grade 25 Tungsten Carbide, or Grade 25 Ruby tips. Both Tungsten Carbide and Ruby have extremely hard and smooth measuring surfaces. Fits all AGD standard Groups 1, 2, 3, 4 indicators. Tungsten Carbide Tips - Extremely smooth and hard, perfect for use in any repetitive measuring application. Will last much longer than standard steel tips. Ruby Tips - Ruby tips have the following desirable properties that make it the material of choice for all measuring applications: Hardness, resistance to wear, chemical and thermal stability, extremely low friction coefficient, negligible thermal expansion. Carbide Tips Ruby Tips Tip Length Size Material Threads No. Tip Length Size Material Threads No. ¼ 3mm Carbide 4-48 15320 ¼ 3mm Ruby 4-48 15328 ¼ 3mm Carbide M2.5 15321 ¼ 3mm Ruby M2.5 15329 ½ 3mm Carbide 4-48 15322 ½ 3mm Ruby 4-48 15330 ¾ 3mm Carbide 4-48 15323 ¾ 3mm Ruby 4-48 15331 ¼ 4mm Carbide 4-48 15324 ¼ 4mm Ruby 4-48 15332 ¼ 4mm Carbide M2.5 15325 ¼ 4mm Ruby M2.5 15333 ½ 4mm Carbide 4-48 15326 ½ 4mm Ruby 4-48 15334 ¾ 4mm Carbide 4-48 15327 ¾ 4mm Ruby 4-48 15335 FLAT & BUTTON TYPE INDICATOR CONTACTS Standard contact points for all AGD standard Dial Indicators with 4-48 threads. All Contacts are Low Carbon Steel, Case Hard, and Black Oxide Plated. Flat Contacts Button Contacts No. Width Thickness No. Width Thickness 20690 ¼.112 20699 3/8.090 20691 3/8.093 20700 ½.156 20692 ½.100 20701 ¾.156 20693 ½.160 20694 5/8.100 20695 ¾.100 20696 1.125 20697 1 ½.125 20698 2.125 2 Contact has ground face - 107 -
14909 Mini Digital Indicators Features for Mini Digital Indicator: Zero Setting mm/inch selection Absolute/relative mode Preset value recall Data transmission Selection of measuring direction 4.25 Overall Length 8mm Mounting Stem Rear Dovetail offers additional fixing options Range: 12,5mm/.5 Features for Mini Test Indicator:.8mm Range 2.9 Overall Length Features for Both Mini Digital Indicator & Test Indicator Digital Display LCD, height of digits: 6mm Output: RS 232, with external power supply FLEXBAR V-ANGLE DIAL DEPTH GAGE BASE Features 120 Prismatic Base 14911 No. Description Resolution 14909 Mini Digital Indicator.0005 /.001mm 14910 Mini Digital Indicator- Water Resistant.0005 /.01mm 14911 Mini Digital Test Indicator- Lever Style.0005 /.01mm 14912 Data Output Cable 18317 Replacement Lithium Battery, 3V Ideal for checking cylindrical parts ranging from 10mm/.394" to 100mm/3.94". This "Keyway" base will accept any dial or digital gage with a.375 stem, or 8mm stem using supplied reducer bushing. Above: Flexbar Depth Gage Base ( No. 16839) in use with No. 12745,.0001" reading dial indicator (not included). FEATURES: Made of tempered stainless steel with ground base. Other surfaces are rust-proof treated. Thickness:.630". No. 16839, Flexbar V-Angle Depth Gage Base only ADDITIONAL DIAL INDICATOR DEPTH GAGE BASES Precision ground and hardened Depth Base accepts any standard AGD Dial Indicator with 3 /8" stem. Manufactured from hardened Steel, ground for flatness, and Black Ox plated. TWO MODELS AVAILABLE: No. 16837, 2 1 /2" Long Base No. 16838, 4" Long Base - 108 -
Has 4-48 Thread FLEXBAR INDICATOR PIN VISE ACCESSORY 18560 Allows any A.G.D. dial indicator to hold any diameter probe, needle, etc. 0 to.040" capacity. Uses standard 4-48 thread for easy mounting to indicator spindle. No. 18560 Pin Vise Accessory for Dial Indicators CARBIDE AND RUBY BALL PRECISION INDICATOR CONTACT TIPS Precision contact tips manufactured for use on standard drop style dial indicators. Available with Grade 25 Tungsten Carbide, or Grade 25 Ruby tips. Both Tungsten Carbide and Ruby have extremely hard and smooth measuring surfaces. Fits all AGD standard Groups 1, 2, 3, 4 indicators. Tungsten Carbide Tips - Extremely smooth and hard, perfect for use in any repetitive measuring application. Will last much longer than standard steel tips. Ruby Tips - Ruby tips have the following desirable properties that make it the material of choice for all measuring applications: Hardness, resistance to wear, chemical and thermal stability, extremely low friction coefficient, negligible thermal expansion. Carbide Tips Ruby Tips Tip Length Size Material Threads No. Tip Length Size Material Threads No. ¼ 3mm Carbide 4-48 15320 ¼ 3mm Ruby 4-48 15328 ¼ 3mm Carbide M2.5 15321 ¼ 3mm Ruby M2.5 15329 ½ 3mm Carbide 4-48 15322 ½ 3mm Ruby 4-48 15330 ¾ 3mm Carbide 4-48 15323 ¾ 3mm Ruby 4-48 15331 ¼ 4mm Carbide 4-48 15324 ¼ 4mm Ruby 4-48 15332 ¼ 4mm Carbide M2.5 15325 ¼ 4mm Ruby M2.5 15333 ½ 4mm Carbide 4-48 15326 ½ 4mm Ruby 4-48 15334 ¾ 4mm Carbide 4-48 15327 ¾ 4mm Ruby 4-48 15335 FLAT & BUTTON TYPE INDICATOR CONTACTS Standard contact points for all AGD standard Dial Indicators with 4-48 threads. All Contacts are Low Carbon Steel, Case Hard, and Black Oxide Plated. Flat Contacts Button Contacts No. Width Thickness No. Width Thickness 20690 ¼.112 20699 3/8.090 20691 3/8.093 20700 ½.156 20692 ½.100 20701 ¾.156 20693 ½.160 20694 5/8.100 20695 ¾.100 20696 1.125 20697 1 ½.125 20698 2.125 2 Contact has ground face - 107 -
14909 Mini Digital Indicators Features for Mini Digital Indicator: Zero Setting mm/inch selection Absolute/relative mode Preset value recall Data transmission Selection of measuring direction 4.25 Overall Length 8mm Mounting Stem Rear Dovetail offers additional fixing options Range: 12,5mm/.5 Features for Mini Test Indicator:.8mm Range 2.9 Overall Length Features for Both Mini Digital Indicator & Test Indicator Digital Display LCD, height of digits: 6mm Output: RS 232, with external power supply FLEXBAR V-ANGLE DIAL DEPTH GAGE BASE Features 120 Prismatic Base 14911 No. Description Resolution 14909 Mini Digital Indicator.0005 /.001mm 14910 Mini Digital Indicator- Water Resistant.0005 /.01mm 14911 Mini Digital Test Indicator- Lever Style.0005 /.01mm 14912 Data Output Cable 18317 Replacement Lithium Battery, 3V Ideal for checking cylindrical parts ranging from 10mm/.394" to 100mm/3.94". This "Keyway" base will accept any dial or digital gage with a.375 stem, or 8mm stem using supplied reducer bushing. Above: Flexbar Depth Gage Base ( No. 16839) in use with No. 12745,.0001" reading dial indicator (not included). FEATURES: Made of tempered stainless steel with ground base. Other surfaces are rust-proof treated. Thickness:.630". No. 16839, Flexbar V-Angle Depth Gage Base only ADDITIONAL DIAL INDICATOR DEPTH GAGE BASES Precision ground and hardened Depth Base accepts any standard AGD Dial Indicator with 3 /8" stem. Manufactured from hardened Steel, ground for flatness, and Black Ox plated. TWO MODELS AVAILABLE: No. 16837, 2 1 /2" Long Base No. 16838, 4" Long Base - 108 -