Product End-of-Life Disassembly Instructions

Product End-of-Life Disassembly Instructions Product Category: Notebooks and Tablet PCs Marketing Name / Model [List multiple models if applicable.] HP 625 Notebook PC Name / Model #2 Name / Model #3 Name / Model #4 Name / Model #5 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE)..0 Items Requiring Selective Treatment. Items listed below are classified as requiring selective treatment..2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable. Quantity of items Item Description Notes included in product Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA) With a surface greater than 0 sq cm 3 Batteries Mercury-containing components Liquid Crystal Displays (LCD) with a surface greater than 00 sq cm All types including standard alkaline and lithium coin or button style batteries For example, mercury in lamps, display backlights, scanner lamps, switches, batteries Includes background illuminated displays with gas discharge lamps 2 Cathode Ray Tubes (CRT) 0 Capacitors / condensers (Containing PCB/PCT) 0 Electrolytic Capacitors / Condensers measuring greater than 2.5 cm in diameter or height 0 External electrical cables and cords 0 Gas Discharge Lamps 0 Plastics containing Brominated Flame Retardants 0 Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent chambers, and service stations. 0 Components and waste containing asbestos 0 Components, parts and materials containing refractory ceramic fibers 0 EL-MF877-00 Page Template Revision A

Components, parts and materials containing radioactive substances 0 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) Description # Motor-screw-driver + Description #2 Motor-screw-driver * Cross head of screwdriver TORX T8 (2.3mm) Description #3 Motor-screw-driver - 3.0 Product Disassembly Process 3. List the basic steps that should typically be followed to remove components and materials requiring selective treatment:. Follow steps described in Disassembly instruction (file attached). 2. If parts can be removed without using a tool, remove it first. 3. Use correct screwdriver and torque value before unlock the screw. 4. 5.. 6. 7. 8. 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations). EL-MF877-00 Page 2 Template Revision A

MANUFACTURING PROCESS INSTRUCTIONS MECHANICAL ASSEMBLY MODEL : VV0 Sub-assembly name: VV0 FA DIS-ASS Y Document No.: SOP VV0 FA ASSY DIS-ASS Y Written by: Cui,Junhua Revision: 0.0 Date: 200/3/8 Page: of 52 A.Current station version list: Station Version Station Version Station Version Station Version Station Version Station Version 0.0 0.0 2 0.0 3 0.0 4 0.0 5 0.0 2 0.0 2 0.0 22 0.0 32 0.0 42 0.0 52 0.0 3 0.0 3 0.0 23 0.0 33 0.0 43 0.0 4 0.0 4 0.0 24 0.0 34 0.0 44 0.0 5 0.0 5 0.0 25 0.0 35 0.0 45 0.0 6 0.0 6 0.0 26 0.0 36 0.0 46 0.0 7 0.0 7 0.0 27 0.0 37 0.0 47 0.0 8 0.0 8 0.0 28 0.0 38 0.0 48 0.0 9 0.0 9 0.0 29 0.0 39 0.0 49 0.0 0 0.0 20 0.0 30 0.0 40 0.0 50 0.0 B.Version Modify list: Date Station Content Ver. Design 200/3/8 ALL First SOP for mass production 0.* Cui,Junhua Auditor: Tabulator: Zhang, Ying

Name : Disassemble Battery (/). Disassemble Battery (Fig.) Fig. Fixture list(fixture standard) Notebook Scanner Bar code printer Fixture list(fixture standard)

Name : Loosen screws & Disassemble Cover 2(/). Loosen SET screws Torsion:.0 ± 0.2 Kgf.cm 3&4 Loosen screws*2;5 Loosen screws*4 2. Disassemble Cover 3 & 4 6070B04330 5 6070B04320 3/4 2 5 2 3 4 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Loosen screws & Disassemble ODD 3(/) For All. Loosen screws (60520D046304) *,and Disassemble ODD Torsion:2.0 ± 0.2Kgf.cm For 3&4 For 5 ODD ODD screws ODD ODD screws Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Disassemble HDD &Loosen screws 4(/). Loosen HDD screws(6052b008070) * 2 and setscrews* Torsion:2.0 ±0.2Kgf.cm 2. Disassemble HDD and take it out 2 6052B008070 SET screws 3 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble Antenna Cable 5(/) 3.Disassemble Antenna interface from WLAN 2.Disassemble Antenna Cable 4 5 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Loosen screws & Disassemble WLAN 6(/). Loosen WLAN Screws(6052B0560) * 2 Torsion:.5 ± 0.2Kgf.cm 2. Take out WLAN 2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Loosen screws 7(/) 3/4 2. Loosen screws (6052B0560) Torsion:.5 ± 0.2 Kgf.cm 3 &4 Loosen 2 screws,5 Loosen 2 screws 2 5 2 3 2 3 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble FAN / BATT Cable 8(/). Disassemble BATT Cable 2. Disassemble FAN Cable Fixture list(fixture standard) Fixture list(fixture standard)

Name : Loosen screws 9(/) FOR 3 & 4 2. Loosen screws (6052B009620) of SW cover *3 Torsion:2.0 ± 0.2 Kgf.cm 3 &4 Loosen 3 screws,5 Loosen 4screws Screws can't be stripped. 3 FOR 5 2 3 4 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble HDD extension board(for 5 ) 0(/) FOR 5 ONLY.Loosen screws (6052B0560) * Torsion:2.0 ± 0.2 Kgf.cm 2.Take out HDD extension board (30A233040) 5 Loosen screws Take out CNTR ODD from extension board Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(#)

Name : Disassemble FAN (/) For 3&4:. Loosen FAN screws (6052B0560) * Torsion:2.0 ± 0.2 Kgf.cm 2. Take out FAN (6033B004602) Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Loosen screws 2(/) 3/4. Loosen screws (6052B009700)*2 of K/B. Torsion:2.0 ± 0.2 Kgf.cm Screws can't be stripped. 2 5 2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : 5 ONLY Loosen screws 3(/) FOR 5 ONLY. Loosen screws (60520D046304) * 4 Torsion:2.0 ± 0.2 Kgf.cm 5 4 2 3 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Loosen screws 4(/) 3/4 For 3&4:. Loosen screws (60520D046304) * 4 Torsion:2.0 ± 0.2 Kgf.cm 2 3 4 For 5:. Loosen screws (60520D046304) * 5 Torsion:2.0 ± 0.2 Kgf.cm 5 3 4 5 2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Loosen screws 5(/) 3/4 2 3 4 For 3&4. Loosen screws (60520D046304) *4 Torsion:2.0 ± 0.2 Kgf.cm For 5. Loosen screws (60520D046304) * 5 Torsion:2.0 ± 0.2 Kgf.cm 5 2 3 4 5 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Disassemble K/B 6(/).Open LCM, turn the machine clock wisely 2. Disassemble K/B 3 4 Disassemble from card ditch first (Fig.) 5 Disassembl from upper left corner first (Fig.2) Fig. 3/4 3.Disassemble K/B FFC CNTR (Fig.3) Fig.2 5 Fig.3 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble Palm from TPCB 7(/).Disassemble Palm rest from TPCB Push down the plam rest, and slip it to the right side. Slip Palm rest to the right side, and take it out Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble FFC 8(/). Push T/P CNTR lock slice aside, pull out FFC from M/B CNTR Fig. Fig. 2 Fig. 3 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Loosen screws (for 3 4 ) 9(/) 3 For 3&4.Loosen screws (60520D046304) (3 Loosen 2 screws,4 Loosen 3 screws) Torsion:2.0 ± 0.2 Kgf.cm 2 4 3 2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Loosen screws 20(/). 3 &4 Loosen screws (60520D046304) * 3. Torsion:2.0 ± 0.2 Kgf.cm 2. 5 Loosen screws (60520D046304) * 4. Torsion:2.0 ± 0.2 Kgf.cm 3/4 5 3 2 3 2 4 FOR 3 & 4 5 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Loosen screws(for 3&4) 2(/) For 3&4. Loosen screws(6052b008070) * from TPCB and BTCB Torsion:2.0± 0.2Kgf.cm 2. Loosen screws (6052B009430) * Torsion:2.0 ± 0.2Kgf.cm FOR 3 & 4 Screws (6052B008070) Screws (6052B009430) 2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble TPCB from BTCB 22(/) FOR ALL. Disassemble TPCB (Fig.) Disassemble the audio jack frist Fig. Audio jack Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble antenna cable (for 3 4 ) 23(/). Disassembleantenna cable 3 Tear the tape of acetic acid 2pcs(6054A007620) 3 4 Tear the tape of acetic acid Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble antenna cable 24(/).Disassemble antenna cable Disassemble antenna cable (Fig.3 4 5 ) 3 4 5 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble MIC cable 25(/) Tear tape of cable. Tear the tape of acetic acid from MIC cable (Fig.) 2.Disassemble MIC cable(fig.2) 3. Take down MIC Cable(Fig.4) Fig. Fig.2 Disassemble MIC cable Fig.3 Take down CNTR Fig.4 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble LCM cable/msi cable 26(/).Disassemble MSI cable of M/B CNTR (Only for 5 MSI Model ) 2. Tear the tape of LCM cable,disassemble LCM cable. 5 MSI Model Disassemble cable Fixture list(fixture standard) Fixture list(fixture standard)

Name : Loosen screws (For Only 5) and disassemble cable 27(/) For all:.disassemble cable 5 2. Loosen screws (60520D046304)* 3 Torsion:3.0 ± 0.2 Kgf.cm For Only 5 2 3 Fixture list(fixture standard) Automatic crossing screw driver(t8) Disassemble 线 棒 Fixture list(fixture standard)

Name : Loosen screws 28(/) Left Right 3 & 4.Loosen screws (60520D046304)* 2 Torsion:3.0 ± 0.2 Kgf.cm 3/4 5.Loosen screws (60520D046304) * 3 Torsion:3.0 ± 0.2 Kgf.cm 2 Left Right 5 3 2 Left Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Loosen screws & Disassemble LCM 29(2/2) Left Right. Hands support one side of LCM,and loosen screws (60520D046304)* 2 Torsion:3.0 ± 0.2 Kgf.cm (Fig.3 /4 5 ) 2. Take down the LCM. 3/4 2 Left Right 5 2 Left Right Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Disassemble speaker cable 30(/) 5.Take down the speaker cable from M/B CNTR 2. Disassemble speaker cable 3 4 :Tearthe tape of acetic acid (6054A007620) 2pcs cable5 :Tearthe tape of acetic acid (6054A007620) pcs 3/4 the tape of acetic acid Fixture list(fixture standard) Fixture list(fixture standard)

Loosen ODD extension board Name : screw & Disassemble Speaker 3(/). Loosen ODD extension board screw (6052B0560)* (Only for5 ) (Fig.) Torsion:.5 ± 0.2Kgf.cm Fig. 2.Loosen screws(6052b0560)*2 (Fig.2) And take down the Speaker(6039B003940) Torsion:.5 ± 0.2Kgf.cm 3 Fig.2 2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble Blue tooth Cable 32(/) 3/4 For 3&4:. Tear the tape of acetic acid (6054A007620) * from cable. For 5:.Tear the tape of acetic acid (6054A007620) * from cable. Tear tape Tear tape 5 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble B/T cable (for B/T model) 33(/) Fig. Fig.2 For 3&4:. Disassemble cable from M/B CNTR For 5:. Disassemble cable from M/B CNTR 2. Take down B/T 3/4 3. Disassemble 下 B/T cable(607b026060) 5 Disassemble CNTR Disassemble CNTR Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble USB/B 34(/) For 5 Fig., Disassemble FFC of M/B CNTR 2, Tear all the tape 3, Disassemble the USB/B 3 4 Disassemble the USB directly 5 Loosen the screws of USB/B (6052B008070) * (Fig.3) Torsion:2.0± 0.2Kgf.cm Screws can't be stripped. 3 5 Loosen screws Fig.3 4 Fig.2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble RJ / Loosen screws 35(/).DisassembleRJ cable(fig.2) 2.Loosen M/Bscrews 3 4 Loosen M/B screws(60520d046304)* 5 Loosen M/B screws(60520d046304)*2 (Fig.) Torsion:2.0± 0.2Kgf.cm 3 3/4 Fig.2 4 5 5 Loosen screws Fig. Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver(t8)

Name : Disassemble M/B 36(/) For 3 & 4. Take down the FFC from M/B For5.Disassemble the FFC from Audio/B For All 2. Take down the Audio/B FFC For 5 5 3/4 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble M/B 37(/2) Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble M/B 37(2/2) For 5 ODD/B For All. Disassemble the ODD extension board from M/B 5 ODDextension board (30A233060) 4 ODDextension board (30A234270) 2. Disassemble MB Tilt M/B right side first. 4 Need to pull down the card trough ODD/B For 4 ODD/B For 3 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble Audio/B 38(/). The left hand holds up BTCB gently, and the right hand disassemble Audio/B,(Fig.) Fig. Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble BATT Cable 39(/) 2 For All:. Loosen screws (6052B009430) * 2 Torsion:.5 ± 0.2Kgf.cm 2. Take down the BATT Cable (607B02620) 3 2 2 4 5 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble THERMAL (For AMD DIS) 40(/) For AMD DIS:. Loosen Thermal screws(6052b0560) * 2 Torsion:.5 ± 0.2Kgf.cm Don t hold the Copper Pipe of Thermal. 2. Disassemble THERMAL MODULE (6043B00850) 2 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble Thermal &Loosen Screws 4(/). Loosen the screws of thermal Torsion:.5 ± 0.2Kgf.Cm Screws can't be stripped. Don t hold the Copper Pipe of Thermal. 2. Disassemble the Thermal Module from M/B 5 6 2 3 4 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Disassemble CPU & DDR 42(/). DisassembleDDR * 2 from M/B CNTR (If there is only one DDR, only need to insert one DDR ) 2.Loosen CPU SOCKET,and take it down (Loosen anticlockwise ) Fig. CPU Fig.2 DDR Fig.3 Fixture list(fixture standard) Flat screw driver suck pen VV0 M/B B side supporting fixture Fixture list(fixture standard)

Name : Disassemble RJ cable (For AMD DIS) 43(/4) For AMD UMA:.Tear 下 the tape of acetic acid (6054A007620) *,DisassembleRJ Cable (Fig.) RJ cable Tear the tape of acetic acid Fixture list(fixture standard) Fixture list(fixture standard) B side supporting fixture

Name : DisassembleRJ 线 (For AMD DIS) 43(2/4) For AMD DIS:.Tear 下 the tape of acetic acid (6054A007620) *,DisassembleRJ Cable (Fig.) Tear the tape of acetic acid RJ cable Fixture list(fixture standard) Fixture list(fixture standard) B side supporting fixture

Name : Disassemble RJ cable (For INTELUMA) 43(3/4) For INTEL UMA.Tear 下 the tape of acetic acid (6054A007620) *,DisassembleRJ Cable (Fig.) L520 RJ cable Tearthe tape of acetic acid Fixture list(fixture standard) Fixture list(fixture standard) B side supporting fixture

Name : Disassemble RJ cabel (For INTEL DIS) 43(4/4) For INTEL DIS.Tear 下 the tape of acetic acid (6054A007620) *,DisassembleRJ Cable (Fig.) Tear the tape of acetic acid RJ cable Fixture list(fixture standard) Fixture list(fixture standard) B side supporting fixture

Name : Disassemble RJ Cable 44(/) Fig..Loosen crews (6052B0560) *2 of boss Torsion:.5 ± 0.2Kgf.cm 2. Disassemble the RJ Cable (607B09990)from Modem(Fig.2 Fig.3) Fig.2 Fig.3 Fixture list(fixture standard) Automatic crossing screw driver B side supporting fixture Fixture list(fixture standard)

Name : Disassemble Touchpad/B 45(/). Tear the tape(6054b040)*, (Fig.2) 2. Disassemble Touchpad/B FFC Fig. Fig.2 Fixture list(fixture standard) Fixture list(fixture standard)

Name : Disassemble Touchpad/B 46(/). Loosen screws (6052B0560) * Torsion:.5 ± 0.2Kgf.cm 2.Disassemble Touchpad/B(30A234290) screws Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver

Name : Loosen screws & Disassemble power/b 47(/) Power/B For 5.Tear tapeof acetic acid of FFC(6054A007620)* (Fig.3) 2. Loosen screws (6052B009620) * Torsion:.5 ± 0.2Kgf.cm While loosening the screws, hands need to pin the power/b Fig. 3.Disassemble power/b(30a234320), (Fig.2,Fig.3) Take out Loosen screws Take out Loosen screws Tear tape 3 4 5 Fig.2 Fig.3 Fixture list(fixture standard) Fixture list(fixture standard) Automatic crossing screw driver