Aluminum Electrolytic Capacitors Axial Miniature, Long-Life

Aluminum Electrolytic Capacitors Axial Miniature, Long-Life 38 AML 0 ASM smaller dimensions Fig. QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) 6.3 x.7 to 0 x 5 VALUE 0 x 30 to x 38 Rated capacitance range, C R. μf to 5 000 μf Tolerance on C R ± 0 % Rated voltage range, U R 6.3 V to 00 V Category temperature range -40 C to +05 C Endurance test at 05 C 000 h 5000 h Useful life at 05 C 000 h 0 000 h Useful life at 40 C, I R applied Shelf life at 0 V, 05 C 38 AML longer life.3 x I R applied: 00 000 h 500 h 8 AHT 0 ATC.8 x I R applied: 500 000 h Based on sectional specification IEC 60384-4 / EN30 300 Climatic category IEC 60068 40/05/56 FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Axial leads, cylindrical aluminum case, insulated with a blue sleeve (case Ø 6.3 mm x.7 mm and 7.7 mm x.7 mm are molded with flame retardant plastic material) Mounting ring version not available in insulated form Taped versions up to case Ø 5 mm x 30 mm available for automatic insertion Charge and discharge proof Long useful life: 000 h to 0 000 h at 05 C, high reliability High ripple current capability Miniaturized, high CV-product per unit volume Material categorization: for definitions of compliance please see www.vishay.com/doc?999 APPLICATIONS Industrial, automotive, EDP and telecommunication Smoothing, filtering, buffering in SMPS; coupling, decoupling, timing Portable and mobile equipment (small size, low mass) Stand-by applications Low mounting height boards, vibration and shock resistant MARKING The capacitors are marked (where possible) with the following information: Rated capacitance (in μf) Tolerance on rated capacitance, code letter in accordance with IEC 6006 (M for ± 0 %) Rated voltage (in V) Upper category temperature (05 C) Date code, in accordance with IEC 6006 Code for factory of origin Name of manufacturer Negative terminal identification Series number (38) Revision: 6-Apr-6 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML SELECTION CHART FOR C R, U R, AND RELEVANT NOMINAL CASE SIES (Ø D x L in mm) C R (μf) U R (V) 6.3 0 6 5 40 50 63 00. - - - - - - - 6.3 x.7 4.7 - - - - - - 6.3 x.7 7.7 x.7 0 - - - 6.3 x.7-6.3 x.7 7.7 x.7 6.5 x 8 - - 6.3 x.7 6.3 x.7-7.7 x.7 6.5 x 8 8 x 8 33 - - - 6.3 x.7 7.7 x.7 - - - 47 - - 6.3 x.7 7.7 x.7 6.5 x 8-8 x 8 0 x 5 68 - - - - - - - 0 x 30 00 6.3 x.7-7.7 x.7 6.5 x 8 8 x 8 0 x 8 0 x 5.5 x 30 50-7.7 x.7 - - - - 0 x 30 5 x 30 0 7.7 x.7 6.5 x 8 8 x 8 0 x 8 0 x 5 -.5 x 30 5 x 30 330 - - - - 0 x 30 -.5 x 30 8 x 30 470 6.5 x 8 8 x 8 0 x 8 0 x 5.5 x 30-5 x 30 8 x 38 680 - - - 0 x 30.5 x 30-8 x 30 x 38 000 0 x 8 0 x 5 0 x 30.5 x 30 5 x 30-8 x 38-500 - 0 x 30.5 x 30 5 x 30 8 x 30 - x 38-00 0 x 5.5 x 30 5 x 30 8 x 30 8 x 38 - - - 3300-5 x 30 8 x 30 8 x 38 x 38 - - - 4700-8 x 30 8 x 30 8 x 38 - - - - 6800-8 x 38 8 x 38 x 38 - - - - 0 000-8 x 38 x 38 - - - - - 5 000 - x 38 - - - - - - DIMENSIONS in millimeters AND AVAILABLE FORMS Ø D 63.5 ±.5 L Ø d Ø D 73 ±.6 L Ø d + F F Form BR: Taped on reel Form BA: Taped in box (ammopack) Case Ø D x L = 6.3 mm x.7 mm to 7.7 mm x.7 mm Fig. - Forms BA and BR Form BR: Taped on reel Case Ø D x L = 6.5 mm x 8 mm to 5 mm x 30 mm Form BA: Taped in box (ammopack) Case Ø D x L = 6.5 mm x 8 mm to 0 mm x 5 mm Fig. 3 - Forms BA and BR I L 33 ± Ø d Ø D F Form AA: Axial in box Case Ø D x L = 0 mm x 30 mm to mm x 38 mm Fig. 4 - Form AA Revision: 6-Apr-6 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML Table AXIAL; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL AXIAL: FORM AA, BA, AND BR PACKAGING QUANTITIES CASE SIE CASE MASS Ø D x L CODE (g) FORM FORM FORM Ø d I Ø D max. L max. F min. (mm) AA BA BR 6.3 x.7 () 0.6-6.5.9 7.5. - 000 000 7.7 x.7 (3) 0.6-7.9.9 7.5.3-500 500 6.5 x 8 4 0.8-6.9 8.5 5.3-000 000 8 x 8 5 0.8-8.5 8.5 5.7-500 500 0 x 8 6 0.8-0.5 8.5 5.5-500 500 0 x 5 7 0.8-0.5 5.5 30 3.3-500 500 0 x 30 00 0.8 55 ± 0.5 30.5 35 4.8 340-500.5 x 30 0 0.8 55 ± 3.0 30.5 35 7.4 60-400 5 x 30 0 0.8 55 ± 5.5 30.5 35.7 00-50 8 x 30 03 0.8 55 ± 8.5 30.5 35.9 0 - - 8 x 38 04 0.8 34 ± 8.5 39.5 44 9.0 5 - - x 38 05 0.8 34 ±.5 39.5 44 4.0 00 - - Note For detailed tape dimensions refer to packaging information: www.vishay.com/doc?836 D D3 0 C (3 x) - 90 ± (3 x) 3.6 + 0. - 0. L.05 + - 0.03 (3 x) 0..3 + 0. (3 x) 0 d Mounting holes Case Ø D x L = 5 mm x 30 mm to mm x 38 mm Especially for applications with severe shocks and vibrations.3 + 0 (3 x) - 0.05 Ø D Ø d +.0-0.5 Fig. 5 - Mounting hole diagram and outline; Form MR: with mounting ring and pins Table MOUNTING RING; DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIE Ø D x L CASE CODE MOUNTING RING: FORM MR Ø d Ø d D max. Ø D max. D3 L max. MASS (g) PACKAGING QUANTITIES 5 x 30 0 0.8.0 + 0.4 5.5 7.5 6.5 ± 0. 33.7 00 8 x 30 03 0.8.0 + 0.4 8.5 9.5 8.5 ± 0. 33.9 40 8 x 38 04 0.8.0 + 0.4 8.5 9.5 8.5 ± 0. 4 9.0 00 x 38 05 0.8.0 + 0.4.5.5.5 ± 0. 4 4.0 00 Revision: 6-Apr-6 3 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

ELECTRICAL DATA SYMBOL DESCRIPTION C R Rated capacitance at 00 Hz, tolerance ± 0 % I R Rated RMS ripple current at 00 Hz, 05 C I L5 Max. leakage current after 5 min at U R tan Max. dissipation factor at 00 Hz Equivalent series resistance at 00 Hz (calculated from tan max. and C R ) Max. impedance at 0 khz or 00 khz 38 AML ORDERING EXAMPLE Electrolytic capacitor 38 series 470 μf/0 V; ± 0 % Nominal case size: Ø 8 mm x 8 mm; Form BA Ordering code: MAL383447E3 Former NC: 38 3447 Note Unless otherwise specified, all electrical values in Table 3 apply at T amb = 0 C, P = 86 kpa to 06 kpa, RH = 45 % to 75 %. Table 3 ELECTRICAL DATA AND ORDERING INFORMATION U R (V) 6.3 0 6 5 C R 00 Hz (μf) NOMINAL CASE SIE Ø D x L (mm) I R 00 Hz 05 C (ma) I L5 5 min (μa) tan 00 Hz 00 Hz ( ) 0 khz ( ) 00 khz ( ) IN BOX FORM AA ORDERING CODE MAL38... TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR 00 6.3 x.7 99 5.3 0.4 3.800 3.000.800-30E3 330E3-0 7.7 x.7 60 6.8 0.4.700.400 0.950-3E3 33E3-470 6.5 x 8 50 9.9 0.4 0.80 0.640 0.500-347E3 3347E3-000 0 x 8 430 7 0.4 0.380 0.300 0.40-30E3 330E3-00 0 x 5 640 3 0.9 0.0 0.80 0.50-3E3 33E3-50 7.7 x.7 40 7.0 0..00.300 0.950-45E3 345E3-0 6.5 x 8 90 8.4 0..400 0.90 0.500-4E3 34E3-470 8 x 8 300 3 0. 0.680 0.430 0.350-447E3 3447E3-000 0 x 5 50 4 0. 0.30 0.00 0.60-40E3 340E3-500 0 x 30 670 34 0.8 0.30 0.60 0.60 45E3 45E3 - - 00.5 x 30 890 48 0.9 0.0 0.90 0.90 4E3 4E3 - - 3300 5 x 30 40 70 0.30 0.60 0.30 0.50 433E3 433E3-4433E3 4700 8 x 30 450 98 0.33 0.0 0.0 0.30 447E3 - - 4447E3 6800 8 x 38 880 40 0.34 0.085 0.074 0.0 468E3 - - 4468E3 0 000 8 x 38 980 00 0.4 0.070 0.06 0.00 403E3 - - 4403E3 5 000 x 38 00 300 0.55 0.063 0.058 0.099 453E3 - - 4453E3 6.3 x.7 58 4.7 0. 8.700 7.300.700-59E3 359E3-47 6.3 x.7 83 5.5 0.6 5.400 3.400.900-5479E3 35479E3-00 7.7 x.7 30 7. 0.6.500.600.000-50E3 350E3-0 8 x 8 30 0.6.00 0.730 0.350-5E3 35E3-470 0 x 8 360 9 0.6 0.540 0.340 0.50-547E3 3547E3-000 0 x 30 630 36 0.0 0.340 0.70 0.60 50E3 50E3 - - 500.5 x 30 860 5 0.0 0.30 0.90 0.90 55E3 55E3 - - 00 5 x 30 090 74 0. 0.70 0.40 0.50 5E3 5E3-45E3 3300 8 x 30 40 0 0.4 0.0 0.00 0.30 533E3 - - 4533E3 4700 8 x 30 480 50 0.8 0.00 0.090 0.0 547E3 - - 4547E3 6800 8 x 38 930 0 0.8 0.07 0.06 0.00 568E3 - - 4568E3 0 000 x 38 00 30 0.38 0.065 0.057 0.098 503E3 - - 4503E3 0 6.3 x.7 46 4.5 0.09 4.000.000.800-609E3 3609E3-6.3 x.7 6 5. 0.4 0.000 5.500.500-69E3 369E3-33 6.3 x.7 74 5.7 0.4 6.800 3.600.900-6339E3 36339E3-47 7.7 x.7 96 6.4 0.4 4.700.600.000-6479E3 36479E3 - Revision: 6-Apr-6 4 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML ELECTRICAL DATA AND ORDERING INFORMATION U R (V) 5 40 50 63 00 C R 00 Hz (μf) NOMINAL CASE SIE Ø D x L (mm) I R 00 Hz 05 C (ma) I L5 5 min (μa) tan 00 Hz 00 Hz ( ) 0 khz ( ) 00 khz ( ) IN BOX FORM AA ORDERING CODE MAL38... TAPED ON REEL FORM BR TAPED IN BOX FORM BA MOUNTING RING FORM MR 00 6.5 x 8 60 9.0 0.3.00.00 0.550-60E3 360E3-0 0 x 8 70 5 0.3 0.940 0.550 0.70-6E3 36E3-470 0 x 5 440 8 0.3 0.440 0.60 0.70-647E3 3647E3-680 0 x 30 580 38 0.4 0.360 0.60 0.50 668E3 668E3 - - 000.5 x 30 790 54 0.5 0.50 0.80 0.90 60E3 60E3 - - 500 5 x 30 00 79 0.5 0.70 0.30 0.50 65E3 65E3-465E3 00 8 x 30 30 0 0.7 0.30 0.00 0.30 6E3 - - 46E3 3300 8 x 38 70 70 0.7 0.090 0.07 0.0 633E3 - - 4633E3 4700 8 x 38 840 40 0. 0.076 0.063 0.00 647E3 - - 4647E3 6800 x 38 00 340 0.7 0.068 0.058 0.099 668E3 - - 4668E3 33 7.7 x.7 9 6.6 0. 5.300.700.000-7339E3 37339E3-47 6.5 x 8 0 7.8 0.0 3.400.900 0.650-7479E3 37479E3-00 8 x 8 80 0.0.600 0.900 0.400-70E3 370E3-0 0 x 5 350 0.0 0.70 0.40 0.00-7E3 37E3-330 0 x 30 490 30 0.09 0.470 0.30 0.300 733E3 733E3 - - 470.5 x 30 650 4 0.09 0.340 0.30 0.0 747E3 747E3 - - 680.5 x 30 750 58 0.0 0.50 0.80 0.80 768E3 768E3 - - 000 5 x 30 970 84 0.0 0.70 0.0 0.40 70E3 70E3-470E3 500 8 x 30 50 0 0. 0.30 0.098 0.0 75E3 - - 475E3 00 8 x 38 640 80 0. 0.093 0.069 0.00 7E3 - - 47E3 3300 x 38 80 70 0.5 0.079 0.06 0.00 733E3 - - 4733E3 0 6.3 x.7 5 5.0 0.09 4.00 7.000.700-09E3 309E3-7.7 x.7 8 6. 0.09 6.500 3.00.00-9E3 39E3-00 0 x 8 30 4 0.08.300 0.700 0.300-0E3 30E3-4.7 6.3 x.7 35 4.6 0.09 30.00 7.000 5.000-8478E3 38478E3-0 7.7 x.7 59 5.3 0.08 3.00 8.000.800-809E3 3809E3-6.5 x 8 00 6.8 0.07 5.00 3.600 0.850-89E3 389E3-47 8 x 8 50 9.9 0.07.400.700 0.500-8479E3 38479E3-00 0 x 5 80 7 0.07.00 0.800 0.70-80E3 380E3-50 0 x 30 40 3 0. 0.730 0.440 0.400 85E3 85E3 - - 0.5 x 30 560 3 0. 0.500 0.30 0.90 8E3 8E3 - - 330.5 x 30 660 46 0. 0.370 0.30 0.0 833E3 833E3 - - 470 5 x 30 860 63 0. 0.60 0.60 0.60 847E3 847E3-4847E3 680 8 x 30 30 90 0. 0.90 0.0 0.40 868E3 - - 4868E3 000 8 x 38 460 30 0. 0.30 0.086 0.0 80E3 - - 480E3 500 x 38 680 90 0.3 0.00 0.07 0.0 85E3 - - 485E3. 6.3 x.7 4 4.4 0.09 65.00 5.000 8.000-98E3 398E3-4.7 7.7 x.7 40 4.9 0.08 7.00 7.000 5.000-9478E3 39478E3-0 6.5 x 8 67 6.0 0.07.00 8.000.400-909E3 3909E3-8 x 8 00 8.4 0.07 5.00 3.600.400-99E3 399E3-47 0 x 5 90 3 0.07.400.700 0.670-9479E3 39479E3-68 0 x 30 300 8 0.07.700.00 0.970 9689E3 9689E3 - - 00.5 x 30 40 4 0.07.00 0.770 0.670 90E3 90E3 - - 50 5 x 30 550 34 0.07 0.780 0.50 0.460 95E3 95E3-495E3 0 5 x 30 650 48 0.07 0.540 0.370 0.330 9E3 9E3-49E3 330 8 x 30 880 70 0.08 0.380 0.70 0.40 933E3 - - 4933E3 470 8 x 38 30 98 0.08 0.70 0.90 0.70 947E3 - - 4947E3 680 x 38 330 40 0.09 0.0 0.40 0.40 968E3 - - 4968E3 Revision: 6-Apr-6 5 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current Leakage current Inductance Equivalent series inductance (ESL) CONDITIONS After min at U R : case Ø D x L = 6.3 mm x.7 mm and 7.7 mm x.7 mm case Ø D x L = 6.5 mm x 8 mm to mm x 38 mm After 5 min at U R AXIAL VALUE MOUNTING RING U s.5 x U R U rev V I L 0.0 C R x U R + 3 μa I L 0.006 C R x U R + 4 μa I L5 0.00 C R x U R + 4 μa Case Ø D x L mm: 6.3 x.7 Typ. 0 nh - 7.7 x.7 Typ. 30 nh - 6.5 x 8 Typ. 5 nh - 8 x 8 Typ. 35 nh - 0 x 8 Typ. 69 nh - 0 x 5 Typ. 38 nh - 0 x 30 Typ. 38 nh -.5 x 30 Typ. 46 nh - 5 x 30 Typ. 48 nh Typ. 39 nh 8 x 30 Typ. 50 nh Typ. 39 nh 8 x 38 Typ. 54 nh Typ. 39 nh x 38 Typ. 59 nh Typ. 39 nh CAPACITANCE (C). C C 0.0 3 4. C C 0. 0.9 4.0 0.8 0.7 0.6 3-60 - 40-0 0 0 40 60 80 00 0 Case Ø D x L = 6.3 mm x.7 mm to 0 mm x 5 mm C 0 = Typical at 0 C, 00 Hz Curve : 6.3 V and 0 V Curve : 6 V and 40 V Curve 3: 50 V and 63 V Curve 4: 00 V Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature 0.9 0.8 0.7-60 - 40-0 0 0 40 60 80 00 0 Case Ø D x L = 0 mm x 30 mm to mm x 38 mm C 0 = Typical at 0 C, 00 Hz Curve : 0 V Curve : 00 V Fig. 7 - Typical multiplier of capacitance as a function of ambient temperature Revision: 6-Apr-6 6 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML EQUIVALENT SERIES RESISTANCE (). C C 0.0 0 Curve : 50 V Curve : 6.3 V; 63 V; 00 V 0.8 0 0.6 0.4 0. 0 0 0 3 0 4 C 0 = Typical at 0 C, 00 Hz f (Hz) Fig. 8 - Typical multiplier of capacitance as a function of frequency Curve : 0 V Curve : 00 V 0 5 0 - - 50 0 50 00 Case Ø D x L = 6.3 mm x.7 mm to 0 mm x 5 mm = Typical at 0 C, 00 Hz Fig. 9 - Typical multiplier of as a function of ambient temperature 0 0 Curve : 6.3 V Curve : 00 V 0 - - 60-40 - 0 0 0 40 60 80 00 0 Case Ø D x L = 0 mm x 30 mm to mm x 38 mm = Typical at 0 C, 00 Hz Fig. 0 - Typical multiplier of as a function of ambient temperature 0 0 0 0 3 0 4 f (Hz) Case Ø D x L = 6.3 mm x.7 mm to 0 mm x 5 mm = Typical at 0 C, 00 Hz Fig. - Typical multiplier as a function of frequency 0 5 Revision: 6-Apr-6 7 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML EQUIVALENT SERIES RESISTANCE () Curve : 0 V Curve : 00 V 0 0 0 0 3 0 4 f (Hz) Case Ø D x L = 0 x 30 to x 38 mm = typical at 0 C, 00 Hz Fig. - Typical multiplier as a function of frequency 0 5 IMPEDANCE () Table 4 IMPEDANCE VS. CAPACITANCE VALUES (Case Ø D x L = 6.3 mm x.7 mm to 0 mm x 5 mm) T amb x C R ( x μf) AT 0 khz 6.3 V 0 V 6 V 5 V 40 V 50 V 63 V 00 V +0 C 300 00 60 0 90 70 80 80-5 C 000 00 750 560 450 300 550 550-40 C 5500 300 000 500 00 900 500 500 0 0 0-0 3 ( Ω) 0 0 3 4 5 6 7 8 Curve : 0 µf, 63 V Curve : 0 µf, 50 V Curve 3: µf, 63 V Curve 4: 47 µf, 5 V Curve 5: 00 µf, 6 V Curve 6: 00 µf, 5 V Curve 7: 0 µf, 0 V Curve 8: 470 µf, 6.3 V 0 - - 60-40 - 0 0 0 40 60 80 00 0 Case Ø D x L = 0 mm x 30 mm to mm x 38 mm 0-0 0 3 0 4 0 5 f (Hz) 0 6 Case Ø D x L = 6.3 mm x.7 mm to 6.5 mm x 8 mm Fig. 3 - Typical multiplier of as a function of ambient temperature at 0 khz Fig. 4 - Typical impedance as a function of frequency Revision: 6-Apr-6 8 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML 0 3 ( Ω) 0 0 Curve : 47 µf, 63 V Curve : 00 µf, 50 V Curve 3: 00 µf, 63 V Curve 4: 0 µf, 5 V Curve 5: 470 µf, 6 V Curve 6: 000 µf, 5 V Curve 7: 000 µf, 0 V Curve 8: 00 µf, 6.3 V 0 ( Ω) 0 Curve : 680 µf; 5 V Curve : 4700 µf; 5 V Curve 3: 6800 µf; 5 V 0-0 0 0 3 0 4 f (Hz) 0 5 Case Ø D x L = 8 mm x 8 mm to 0 mm x 5 mm Fig. 5 - Typical impedance as a function of frequency 4 5 6 7 8 3 0-0 - 0 0 3 0 4 0 5 f (Hz) Case Ø D x L = 0 mm x 30 mm to mm x 38 mm Fig. 6 - Typical impedance as a function of frequency 3 0 6 0 ( Ω) 0 Curve : 680 µf; 5 V Curve : 4700 µf; 5 V Curve 3: 6800 µf; 5 V 0 ( Ω) 0 Curve : 680 µf; 5 V Curve : 4700 µf; 5 V Curve 3: 6800 µf; 5 V 0-3 0-3 0-0 0 3 0 4 0 5 f (Hz) 0 6 Case Ø D x L = 0 mm x 30 mm to mm x 38 mm Fig. 7 - Typical impedance as a function of frequency 0-0 0 3 0 4 0 5 f (Hz) 0 6 Case Ø D x L = 0 mm x 30 mm to mm x 38 mm T amb (40 C) Fig. 8 - Typical impedance as a function of frequency Revision: 6-Apr-6 9 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML RIPPLE CURRENT AND USEFUL LIFE 3.8 CCC06 I A I R 3.7 3.6 3.5 3.4 3.3 3. 3. 3.0.8.6 Lifetime multiplier.4.0..0.5.0 3.0 4.0 I A = Actual ripple current at 00 Hz I R = Rated ripple current at 00 Hz, 05 C () Useful life at 05 C and I R applied: Case Ø D x L = 6.3 mm x.7 mm to 0 mm x 5 mm: 000 h Case Ø D x L = 0 mm x 30 mm to mm x 38 mm: 0 000 h.8.6.4. ().0 0.8 0.5 0.0 40 50 60 70 80 90 00 0 60 00 50 00 6.0 8.0 0 30 Fig. 9 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 5 MULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) I R MULTIPLIER U R = 6.3 V TO 0 V U R = 6 V TO 5 V U R = 40 V TO 00 V 50 0.95 0.90 0.85 00.00.00.00 300.07..0 000..0.30 3000.5.5.35 0 000.0.30.40 Revision: 6-Apr-6 0 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

38 AML Table 6 TEST PROCEDURES AND REQUIREMENTS NAME OF TEST Endurance TEST REFERENCE IEC 60384-4 / EN30 300 subclause 4.3 PROCEDURE (quick reference) T amb = 05 C; U R applied; Case Ø D x L: 6.3 mm x.7 mm to 0 mm x 5 mm: 000 h; 0 mm x 30 mm to mm x 38 mm: 5000 h REQUIREMENTS U R 6.3 V; C/C: + 5 % / - 30 % U R 6.3 V; C/C: ± 5 % tan.3 x spec. limit x spec. limit I L5 spec. limit U R 6.3 V; C/C: + 45 % / - 50 % Useful life CECC 3030 subclause.8. T amb = 05 C; U R and I R applied; Case Ø D x L: 6.3 mm x.7 mm to 0 mm x 5 mm: 000 h; 0 mm x 30 mm to mm x 38 mm: 0 000 h U R 6.3 V; C/C: ± 45 % tan 3 x spec. limit 3 x spec. limit I L5 spec. limit no short open circuit total failure percentage: % Shelf life (storage at high temperature) IEC 60384-4 / EN30 300, subclause 4.7 T amb = 05 C; no voltage applied; 500 h After test: U R to be applied for 30 min, 4 h to 48 h before measurement C/C, tan, : for requirements see Endurance test above I L5 x spec. limit Revision: 6-Apr-6 Document Number: 833 For technical questions, contact: aluminumcaps@vishay.com ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9000

Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 3-Jun-6 Document Number: 9000