Engine Identification



Similar documents
MINI EXTENDED SERVICE CONTRACTS

BMW Production Data Keith Turner 5/31/2004

DECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001

CONTINUED COVERAGE FOR YOUR NEW, USED, OR CERTIFIED PRE-OWNED BMW.

SERIES 60 SERVICE MANUAL

PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99

Sakura Endress. Product Selection Guide. Sakura Endress. The Power of Know How

PVM Piston Pumps Service Manual

1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.

New 27 hp 2 Cylinder Liquid-Cooled Engine

C18 ACERT Fire Pump Tier bkw/ rpm

REMAN ENGINES APPLICATION GUIDE

Common Rail Diesel - Repair Parts

1013 E. The engine for agricultural equipment.

Terminal Boxes Series 8146

The cylinder head bolts tightening stages have been updated as listed in Table 1.

Audi A8. Fluids in Transmission and Final Drives (overview)

PVH131/141 Variable Displacement Piston Pump - 11 Design

AMC Engine codes -- ALL OF THEM! (By Frank Swygert, Publisher, "American Independent Magazine" (AIM))

COOLING SYSTEM Section Page

Engine Friction and Lubrication

SELECTION, APPLICATION AND MAINTENANCE

Online EFFECTIVE AS OF JANUARY 2013

Maxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME

3304B. Marine Auxiliary Engine SPECIFICATIONS STANDARD EQUIPMENT ACCESSORY EQUIPMENT PERFORMANCE DATA. 56 bkw (75 bhp) rpm

Kobelco Extended Warranty Program.

Copyright 2013 wolfssl Inc. All rights reserved. 2

Real Time Acquisition and Web Visualization of Customer Meter Data. Stephen Perkins Enwave Energy Al Thong Matrikon Inc.

DATE: July 8, 2013 Service Instruction No. 1009AV (Supersedes Service Instruction No. 1009AU) Engineering Aspects are FAA Approved

BMW E46 Convertible. Storage Compartment Lid Hydraulic Cylinder Removal

Jeep Renegade Technical specifications

Split Controller. User Manual SM-SS-F 2009/01/04

BMW Motorrad Maintenance Schedule R 1200 GS 0307 / 0317

South East of Process Main Building / 1F. North East of Process Main Building / 1F. At 14:05 April 16, Sample not collected

Marine Diesel Engine VF4 VF5 VF4.140E VF4.170E VF5.220E VF5.250E. Service Manual

912. The engine for construction equipment.

EveryTM. Coverage. North American Truck Coverages For ISL9, ISC8.3 And ISB6.7 Engines.

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing

Application Note 83 Fundamentals of RS 232 Serial Communications

BRAKE SYSTEMS 101. Energy Conversion Management. Presented by Paul S. Gritt

CU-950 Installation Guide

Information and Instructions

June Models. Subject

SECTION HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT

PARTS LIST T30 MODEL 2545 TWO STAGE INDUSTRIAL AIR COMPRESSOR

Harrison R&D Houston, TX. OBDScan Manual Version March 22, 2005

Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks

Parts Catalog For Nordco Engine (JD 4045TF270)

3516 Industrial Engine

Engine Heat Transfer. Engine Heat Transfer

MoTeC USA GPS. Part # M GPS BL Available in 10 Hz or 20 Hz. USER MANUAL Version 1.4

EveryTM. Coverage. North American Truck Coverages For 2013 ISL9 And ISB6.7 Engines.

PARTS MANUAL EH035V ENGINE. Models. PUB-EP Rev. 09/04

CYLINDER LEAKAGE CHECK (Compression)

Principles of Engine Operation

MARK-3 DIS Digital Ignition Solution

4000 Series 4008TAG2A Diesel Engine ElectropaK rpm

L a h ip e r t e n s ió n a r t e r ia l s e d e f in e c o m o u n n iv e l d e p r e s ió n a r t e r ia l s is t ó lic a ( P A S ) m a y o r o

AUTO TRANS DIAGNOSIS Article Text 1998 Volkswagen Passat This file passed thru Volkswagen Technical Site -

Service Instruction. 1.0 SUBJECT: ECi Accessory Cases for Lycoming 4-Cylinder engines with single magneto configurations and TITAN 361 Engines

Fundamentals Engineering Drawing Practices

SKP Series SKP15U.. Gas Valve Actuator with Safety Shutoff Function

GEP550 (3-Phase) 50 HZ. 500 kva / 400 kw FEATURES. Exclusively from your Caterpillar dealer

18SP653* EPA04 and EPA98 MBE 4000 High Pressure Fuel Line and Transfer Tube Installation

FS Lubricants. Oil Analysis Program

Worksheet A2 : Fundamental Counting Principle, Factorials, Permutations Intro

Electric Motor Operator for: Gate Valves / Butterfly Valves / Plug Valves M&H VALVE

Air Eliminators and Combination Air Eliminators Strainers

HOW TO FIND YOUR ENGINE SERIAL NUMBER

Model QT-54. QT Series. Parts Manual

Expert Rexroth Technology Centers. World-class, Factory-certified Service and Repair for Rexroth Hydraulics

1993 VOLKSWAGEN ENGINES 2.5L 5-Cylinder. EuroVan

Engine/Gearbox Combinations

SB96-11B FAA APPROVED Supersedes SB96-11A, SB96-11, M84-16

Note: This information obtained from internet sources and not verified- use at your own risk!!!!

C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP CONTENTS-FRAME GROUP

VOLVO PENTA CLASSIC PARTS

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

Irrigation Pump Variable Frequency Drive (VFD) Energy Savings Calculation Methodology. Public Utility District No. 1 of Chelan County

BRAKE SYSTEM OVERVIEW AND OPERATION PROCESS 1. BRAKE SYSTEM GENERAL INFORMATION 1) DESCRIPTION AND OPERATION 16-3.

STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE AUTO 220 INTERNAL COMBUSTION ENGINES

ABC-1000 Automatic Boiler Level Controller Operation and Installation Manual

830-II *330492* Cummins 4 Cylinder Engine Breakdown Rev. 00

TECHNICAL BULLETIN October 2012 FUEL TRANSFER PUMP AND CENTRIFUGAL BOOST PUMP CANISTER, UPGRADE OF

*Specify Oversize When Ordering

Engine catalogue. Marine Diesel engines. MAN range - light duty

Volkswagen Jetta, Golf, GTI 1999, Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)

Specifications for Volkswagen Industrial Engine

MOTEUR / ENGINE TM K9-ES

Exclusively Marketed by Anthola Pte Ltd & Singapore Insurance & Credit LLP (Supported by Lonpac Insurance SIngapore) Copyright 2012 AIC

REMAN ENGINES APPLICATION GUIDE

Copyright 2002 Ford Motor Company PAGE 1

REMOVAL AND INSTALLATION

Turbocharger system components, servicing

MICROPROCESSOR AND MICROCOMPUTER BASICS

Series cc Axial Piston Pump. Parts Manual

ELECTRICAL WIRING (R.H. DRIVE VEHICLES)

Delivery Schedules EDI VDA Guidelines for BMW Motoren GmbH

Heavy Fuel Oil supply units. The world s best selling HFO supply unit. The right choice for any conditions

Transcription:

Group 11 11 02 84 (2033) Woodcliff Lake, NJ October 1990 Engine Service Engineering This Technical Reference Information supersedes T.R.I. 11 02 84 (2033) dated October 1985. It has been updated to include several new engine versions. Please remove and discard T.R.I. 11 02 84 (2033) dated October 1985 from your T.R.I. binder. -------------------------------------------------------------------------------------------------------- SUBJECT: Engine Identification -------------------------------------------------------------------------------------------------------- MODEL: All U.S. Versions since 1978 CONDITION: CORRECTION: GENERAL INFORMATION: Determination of engine information on displacement size, country version, fuel system, revision state and engine serial number from codes stamped on engine block. Enclosed explanation of codes stamped in engine block should clarify information. If you are investigating a code which does not appear in the enclosures (i.e. grey market import), contact your regional technical manager for assistance. Various codes may be stamped into the engine block. These codes represent: 1. ENGINE NUMBER AND CODE: NEW ENGINES INSTALLED IN PRODUCTION Engine Number: A series production engine will have an eight-digit engine number consisting of two groups of four digits. The 1 st block contains 4 digits with information on the assembly line and serial number of engines produced daily. The 2nd block shows the factory code and day of production. 0 001 0 000 0 Assembly line 0 or 1= M10, M42 2 or 3 = M20, M21,, M50 Munich/Steyr 4 or 5 = M30 6 = S14, S38, M70 001 = Serial number 0 = Factory code 0-4 =Munich 5-9 =Steyr (Austria) 000 = Production day Engine Code: (New Engines Installed in Production) Issue status (03/2001) Valid only until next CD is issued Copyright Page - 1 -

In addition to the eight digit engine number, an engine designation code is stamped in series production engines for model identification. The decoding of these numbers can be accomplished using Attachment 1. Note: These production engine designation codes are different from the codes of new/remanufactured engines obtained from the parts dept. and should not be confused with them. This code (see below) provides information on displacement, number of cylinders, fuel system, change status and country version of engines installed during production: Hyphens and dashes are not die-stamped in the sequence, e.g. 16 4V B/A stands for: 16 = Displacement (e.g. 1.6 1) 4/6/12 = 4- or 6- or 12-cylinders E/V/T = Fuel Injected/Carbureted/Turbocharged engine A,B,C = Internal BMW information (change index) A/C/E/W/Y/Z = Country Codes K = Catalytic converter Fig. 1 M10-, M30-, S14 and S38 engines (Flywheel End of Crankcase) Fig. 2 M20/M21 Engine Issue status (03/2001) Valid only until next CD is issued Copyright Page - 2 -

(Intake Side of Crankcase) Fig 3. M42 Engine (intake Side of Crankcase) Fig. 4 M50 Engine (Intake Side of Crankcase) Fig. 5 M70 Engine (Right Front Side of Crankcase) Issue status (03/2001) Valid only until next CD is issued Copyright Page - 3 -

Fig. 6 S38 Engine (Water Pump Flange) 2. ENGINE NUMBER AND CODE: NEW/REMANUFACTURED ENGINES OBTAINED FROM YOUR PARTS DISTRIBUTION CENTER Engine Number: After grinding off the numbers for the original engine data, information for the remanufactured engine is now die-stamped in the same position as for new engine identification. Similar to series production engines, the 8-digit engine number also consists of 2 blocks of 4 digits, but stand for different data: The 1st block of 4 digits provides information on the serial number of engines produced daily. The 2nd block contains a code for either a remanufactured or for a new engine as well as the month and year of Example: production. 0001 A 12 7 7 Production year: 1987 12 Production month: December A Code: A = Exchange engine N = New engine 0001 Serial number (each month) Engine Code: Codes for new/remanufactured spare parts engines are also different from the codes used on series production engines: The decoding of these numbers can be accomplished using Attachment 2 for U.S. version engines. This decoding identifies the specific part number of the engine. Attachment 1 to T.R.I. 11 02 84 (2033) CODES FOR NEW ENGINES INSTALLED IN PRODUCTION: US MODELS Issue status (03/2001) Valid only until next CD is issued Copyright Page - 4 -

Model Model Year Engine Code Explanation (SAE hp) Type E30 318i 1984-1985 M10 18 4K A 101 hp 318is 1991 M42 18 4S 1 134 hp, 16-valves 325e 1984-1986 M20/2.7 27 6K A 121 hp 325e 1987 M20/2.7 27 6K B 128 hp 325i, 325ix, 325is, 325iC All Years M20/2.5 25 6K 1 168 hp M3 S14 23 4E A 192 hp E28 524td 1985-1986 M21 24 6T A 114 hp 528e 1983-1986 M20/2.7 27 6K A 121 hp 528e 1987-1988 M20/2.7 27 6K B 128 hp 533i 1983-1984 M30 32 6E A 177 hp 535i 1985-1988 M30 34 6K A 182 hp M5 1988 S38 35 6E E 256 hp E34 525i to 8/90 M20/2.5 25 6E 2 168 hp 525i from 9/90 M50 25 6S 1 188 hp, 24-valves 535i from 1989 M30 34 6K B 208 hp M5 from 1991 S38 36 6S 1 310 hp E24 633CSi 1978-1984 M30 32 6E A 177 hp 635CSi, L6 M30 34 6K A 182 hp 635CSi 1988-1989 M30 34 6K B 208 hp M6 1987-1988 S38 35 6E E 256 hp E31 850i M70 50 12 A 295 hp E23 733i 1978-1984 M30 32 6E A 177 hp 735i 1985-1987 M30 34 6K A 182 hp E32 735i M30 34 6K B 208 hp 750iL M70 50 12 A 295 hp Attachment 2 to T.R.I. 11 02 84 (2033) Issue status (03/2001) Valid only until next CD is issued Copyright Page - 5 -

REMANUFACTURED ENGINES FOR U.S. MODELS Engine Engine Model Application Type Part Number Code 2002 1976 49 States M10 11 00 9 057 924 21 US 2002 1968-73 up to 1975 M10 11 00 1 261 406 20 2002 1974-75 from 1975 M10 11 00 1 261 408 21 2002Tii Serial Numbers: M10 11 00 9 056 520 22Ti US 2761944 to 2764521 2762372 to 2764521 2780001 to 2782928 2.5CS, CSA All Years M30 11 00 1 263 288 25 320i 1977-79 M10 11 00 1 276 767 320 US 320i 1980-83 M10 11 00 1 276 769 320 US/1.8 318i to 1985 M10 11 00 1 705 553 318 EL US/1 318i, 318is from 1991 M42 11 00 1 727 883 18 4S 02 325e 1984-85 M20/2.7 11 00 1 289 118 325 eta US 325, 325e, 325es M20/2.7 11 00 1 717 479 325 ET US/1 from 9/86 to 9/87 Prod. 325i, 325is, 325ic M20/2.5 11 00 1 722 939 202 502 from 9/87 Prod. 325ix up to 9/87 Prod. M20/2.5 11 00 1 717 478 325ix/US 325ix from 9/87 Prod. M20/2.5 11 00 1 722 925 202 504 M3 up to S.N. 2190004 S14 11 00 1 310 599 M3/A and from S.N.2190788 630CSi, 530i, 3.0Si M30 11 00 1 264 756 530 J/US All Years 524td 1985-86 M21 11 00 1 285 897 524 AB US 528i 1979 M30 11 00 1 276 765 528 EL US 528i 1980-81 M30 11 00 1 276 775 528/2 EL US 528e 1982-83 M20/2.7 11 00 1 278 827 27 eta US 528e 1984-85 M20/2.7 11 00 1 289 054 27/1 eta US 528e to 9/87 Prod. M20/2.7 11 00 1 716 059 27/2 eta US 528e from 9/87 M20/2.7 11 00 9 059 131 to 12/87 Prod. 533i, 633CSi 1983 M30 11 00 1 279 923 633/4 EL US 533i, 633CSi 1984 M30 11 00 1 288 258 633/5 EL US 535i, 635CSi M30 11 00 1 707 475 535 KAT 1985 to 1988 525i (E34) M20/2.5 11 00 1 719 874 20 25 08 525i (E34) from M50 11 00 1 730 994 25 6S 02 9/90 Prod. 535i (E34) from M30 11 00 1 720 674 30 35 05 6/88 Prod. M5 (E28), M6 S38 11 00 1 310 615 S38 KAT M5,1991 S38 11 00 1 315 562 36 6S 02 630CSi, 530i, 3.0Si M30 11 00 1 264 756 530 J/US Issue status (03/2001) Valid only until next CD is issued Copyright Page - 6 -

All Years 633CSi 1978-79 M30 11 00 1 276 777 633 El US 633CSi 1980-81 M30 11 00 1 276 778 633/2 EL US 633CSi 1982 M30 11 00 1 278 517 633/3 EL US 635CSi from 6/87 Prod. M30 11 00 1 717 485 635 KAT/1 US/J 733i 1978-79 M30 11 00 1 271 547 733/EL US 733i 1980-81 M30 11 00 1 276 779 733/2 EL/US 733i 1982-83 M30 11 00 1 278 515 733/3 EL US 733i 1984- M30 11 00 1 288 263 733/4 EL US 733i from 1/84 Prod. M30 11 00 1 716 149 733/5 EL US 735i 1985 M30 11 00 1 707 473 735 KAT 735i (E23) to 9/86 Prod. M30 11 00 1 717 482 735i (E32) All Years M30 11 00 1 714 359 735 32 US 735iL (E32) M30 11 00 1 720 655 303 503 750iL to 3/90 Prod. M70 11 00 1 715 605 750LL 750iL from 3/90 Prod. M70 11 00 1 733 530 50 12 01 750iL All Years M70 11 00 1 720 302 (RMFD Block Only) 850i, Auto trans. M70 11 00 1 733 534 50 12 03 850i, Manual trans. M70 11 00 1 733 972 50 12 05 Issue status (03/2001) Valid only until next CD is issued Copyright Page - 7 -