THE OLDAKER DIFFERENCE.

THE OLDAKER DIFFERENCE. 506 THE NEEDLE TIP SAFETY SERIES THE REPLACEMENT SAFETY SERIES TAPERED STRAIN RELIEF NICKLE PLATED THREADED BRASS TIP MOLDED FLAME RETARDANT WITH SAFETY RING HEAVY DUTY WIRE 20,000 VOLTS BREAKDOWN 5,000 VOLTS WORKING. STAINLESS STEELE THREADED NEEDLE TIP WITH POLISHED POINT ACCESSORIES ARE FOR ADDED SAFETY 9 LEAF SPRING FOR ADDED CONTACT SURFACE MOLDED FLAME RETARDANT WITH SAFETY RING ACCESSORIES ARE FOR ADDED SAFETY HEAVY DUTY WIRE 20,000 VOLTS BREAKDOWN 5,000 VOLTS WORKING. THE WIRE DIFFERENCE Notice the wire shown on the left, which is used on our test leads, has many more strands than the wire shown on the right. The difference enables our wire to carry more current and amps safely, and is not easily broke. Also the wire we use has EDPM Rubber insulation which stays more consistent in different temperature ranges, the other wire uses PVC insulation which becomes very stiff in cooler temperatures. Oldaker standard lead length is 4' most others are 2' to 3'. OLDAKER WIRE THE OTHER WIRE THE PROBE DIFFERENCE OLDAKER PROBE Notice the probes on the right use tips that are all nickel plated brass with small safety rings, all accessories, if any, must slide onto the small.080" diameter pin, which is not safe or secure. Oldaker probes (Shown on the left) use stainless steel needle tips with very sharp polished points for piercing insulation and sure contact, the tips are threaded so all accessories can be securely attached to the tip for better contact and safety. Also the tips are recessed so that the area where the accessory connects to the probe tip is inside the probe to prevent the user from shock. The material used for the probe is ABS, V094 Flame Retardant plastic. The safety rings are 3/4" and well positioned on the probe to keep the user from the exposed tip. THE OTHER PROBE VALUE ADDED FROM OLDAKER DISTRIBUTORS IF YOU HAVE A NEED FOR ANY SPECIAL LEADS OR CABLES THAT ARE NO LONGER AVAILABLE FROM THE MANUFACTURER, OR IF YOU HAVE A NEW DESIGN YOU NEED MADE. LET OLDAKER DISTRIBUTORS HELP. CHECK FROM OUR LIST OF CAPABILITIES. SPECIAL CAPABILITIES INCLUDE : * CUSTOM DESIGN AND MANUFACTURING OF TEST LEADS OR WIRING DEVICES. * ASSEMBLY OF COMPLEX UNITS, BOTH ELECTRICAL & MECHANICAL. * PACKAGING. * RESISTANCE SOLDERING. * 5 INJECTION MOLDING MACHINES (.5 TO 3 OZ.) BOTH HORIZONTAL & VERTICAL WITH SHUTTLE TABLES. * AUTOMATIC WIRE CUTTING & STRIPPING. * LIGHT PUNCH PRESSES. * LATHES. * HANDSCREW MACHINES. * DRILL PRESSES. * BANDSAWS. * AUTOMATIC SCREW MACHINES, (SINGLE & 5 SPINDLE). * MILLING MACHINES. * WELDING EQUIPMENT (ELECTRIC & GAS). * SHEET METAL SHEARS. * BEND BRAKES. MACHINE CAPABILITIES INCLUDE : OLDAKER MFG. CORP. 301 NORTH MAIN ST. DUNKIRK OHIO 45836 TEL : (419) 759-3551 FAX : (419) 759-3312 E-MAIL : ream@testleads.net

PRODUCT INDEX ACCESSORIES 10 13 15 18 19 20 ADAPTORS & ADAPTOR LEADS 13 20 24 BNC LEADS 7 8 15 16 17 BREAKOUT LEADS 15 16 BULK WIRE & CABLE 26 CLIP LEADS 11 12 CLIPS 15 18 19 20 21 COIL CORD TEST LEADS 5 13 26 CONNECTORS 23 24 DOUBLE ADAPTORS 16 17 24 FLEXIBLE PROBE TEST LEADS 5 FUSE HOLDER 24 FUSED TEST LEADS 6 HOOK LEADS 8 9 11 13 16 HOOKS 15 21 22 JUMPER LEADS 7 14 15 LEAD BENDER 24 LEAD HOLDER 10 MICRO ADAPTORS 8 13 15 MINIATURE TEST LEADS 4 8 10 13 PART NUMBER INDEX 27 S & JACKS 22 23 24 PROBES 6 7 8 9 10 18 23 24 PROBE TIPS 24 RETRACTABLE TEST LEADS 6 SCOPE PROBES 25 SHORTING 24 SILICONE TEST LEADS 5 6 8 9 SOLDERING ACCESSORIES 25 SPECIALTY LEADS 7 10 13 16 STACKABLE TEST LEADS 11 13 14 TELEPHONE STYLE LEADS & ACCESSORIES 11 19 20 TEST LEAD KITS 6 7 8 9 10 22 TEST S 4 5 6 10 INFORMATION All Oldaker products are guaranteed, claims of defective material must be made within 10 days of shipment... Oldaker will not be liable for damages, loss or expenses arising in connection with the sale, resale, use of, or the inability to use its products for anything other than its purpose... All products are shipped in zip polybags or plastic pouch. Any products to be returned must be authorized by Oldaker or Oldaker Distributors. IF YOU DON'T SEE IT IN THE OLDAKER CATALOG. ASK FOR IT FROM YOUR OLDAKER DISTRIBUTOR. WE MAY BE ABLE TO HELP. FOR A COMPLETE UP TO DATE CROSS REFERENCE CHECK OUR WEBSITE AT www.testleads.net. PAGE 3

RATED 1,000 VOLTS 10 AMPS NEEDLE TIP SERIES SAFETY LEAD PART NUMBER AND OTHER STYLES. 518-7.312.380.360 SHORT 518-6 518-20 518-21 518-22 THIS LEAD USES NEEDLE TIPS JACK 518-8 JACK.080 PIN RETRACTABLE STACKABLE 518-2 518-1 518-9 518-11 518-3 518-5 518.080 PIN The TIP on this lead is made of.080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing. Threaded 8-32 for attachments. (Nickel plated). The PROBE is 5" molded flame retardant ABS plastic with 3/4" safety ring.. NOTE: MINI LEADS USE 20 ga. WIRE The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working. (41 X 36) TINNED COPPER STRANDING Standard length is 4 feet, Sold as Sets 1 Red and 1 Black..105" DIA. LEAD LENGTH 3.5' 518-10 MINI.105 JACK 519-1 MINI 519 MINI 519-2 RATED 1,000 VOLTS 10 AMPS REPLACEMENT SERIES SAFETY LEAD PART NUMBER AND OTHER STYLES. JACK 486-7.312.380.360 SHORT 581 486-6 486-20 486-21 486-22 THIS LEAD INCLUDES THREADED CLIPS 486-16 The TIP on this lead is made of.080" Dia. X 1/2" long brass tip threaded 8-32 for attachments. (Nickel plated)... The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring.. The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working. Standard length is 4 feet, Sold as Sets 1 Red and 1 Black. Includes clips. 582 486-2 486-3 486-15 486-18 486-17 486-5 JACK.080 PIN.080 PIN MINI.105 JACK RETRACTABLE 495-1 MINI 476-4 STACKABLE MINI 513 NOTE: MINI LEADS USE 20 ga. WIRE (41 X 36) TINNED COPPER STRANDING.105" DIA. LEAD LENGTH 3.5' RATED 1,000 VOLTS 10 AMPS SLIM-LINE SERIES TEST LEAD PART NUMBER AND OTHER STYLES. THIS LEAD USES NEEDLE TIPS.312.380.360 SHORT 596-7 586-1 586-20 586-21 586-22 JACK.080 PIN RETRACTABLE STACKABLE 597-2 596-2 596-4 596-8 596-3 JACK 596-6 596-5 596-1.080 PIN #10 LUG 596 594 The TIP on this lead is made of.080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing. Threaded 8-32 for attachments. (Nickel plated). The PROBE is 4.25 slim-line.340 dia. molded flame retardant ABS plastic with non slip ribs and no safety ring.. The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working..standard length is 4 feet, Sold as Sets 1 Red and 1 Black. RATED 1,000 VOLTS 10 AMPS SLIM-LINE MINI SERIES TEST LEAD THIS LEAD USES NEEDLE TIPS PART NUMBER AND OTHER STYLES. THIS LEAD INCLUDES THREADED CLIPS MINI.105 JACK MINI 476-16 476-14 MINI 476-15 The TIP on this lead is made of.080" Dia. X 1/2" long brass tip threaded 8-32 for attachments. (Nickel plated)... The PROBE is 3 slim-line mini.340" dia. molded flame retardant ABS plastic with non slip ribs and no safety ring.. The WIRE is 20 ga. (41x36) tinned copper stranding, rubber insulation.105" Dia. 10KV breakdown 2KV working. Standard length is 3.5 feet, Sold as Sets 1 Red and 1 Black. Includes clips. PAGE 4

PART NUMBER AND OTHER STYLES. NEEDLE TIP FLEXIBLE SERIES SAFETY LEAD RATED 1,000 VOLTS 10 AMPS 620.312.380.360 SHORT 619 619-20 619-21 619-22 THIS LEAD USES NEEDLE TIPS JACK 662 663 615-11 617 618.080 PIN JACK 664 RETRACTABLE 616 STACKABLE.080 PIN 665 615 FLEXIBLE PROBE THESE LEADS USE RUBBER WIRE The TIP on this lead is made of.080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing. Threaded 8-32 for attachments. (Nickel plated)... The PROBE is 5" molded P.V.C plastic with 3/4" safety ring.. The WIRE is 18 ga. (65x36) tinned copper stranding, RUBBER insulation.145" Dia. 20KV breakdown 5KV working. Standard length is 4 feet, Sold as Sets 1 Red and 1 Black. PART NUMBER AND OTHER STYLES. NEEDLE TIP FLEXIBLE SILICONE SERIES SAFETY LEAD RATED 1,000 VOLTS 10 AMPS.312.380.360 SHORT 774-7 774-6 774-20 774-21 774-22 THIS LEAD USES NEEDLE TIPS JACK JACK 774-1 774-9 774-11 774-3 774-8.080 PIN 774-5 RETRACTABLE 774-2 STACKABLE.080 PIN 774-10 774 FLEXIBLE PROBE THESE LEADS USE SILICONE WIRE The TIP on this lead is made of.080" Dia. X 5/8" long stainless steel with a polished point for insulation piercing threaded 8-32 for attachments. (Nickel plated)... The PROBE is 5" molded P.V.C. plastic with 3/4" safety ring.. The WIRE is 18 ga. (440x002) copper stranding, SILICONE insulation.145" Dia. -100C to +300c, 20KV breakdown 5KV working. Standard length is 4 feet, Sold as Sets 1 Red and 1 Black. PART NUMBER AND OTHER STYLES. COIL CORD SERIES TEST LEAD RATED 1,000 VOLTS 10 AMPS JACK 773-4.312.380.360 SHORT 773-7 773-6 773-20 773-21 773-22 773-5 JACK 773 773-2 773-1 THIS LEAD USES NEEDLE TIPS The TIP on this lead is made of.080" dia. X 5/8" stainless steel with a polished point for insulation piercing. Threaded 8-32 for attachments (nickel plated). The PROBE is 5" long molded flame retardant ABS plastic with 3/4" safety ring.. The WIRE is 18 ga. (65x36) neoprene retractable coil cord 1 foot retracted, 5 foot extended... These leads are Sold as Sets 1 Red and 1 Black. PART NUMBER AND OTHER STYLES. 2 CONDUCTOR COIL CORD SERIES TEST LEAD JACK 776-8.312.380.360 776-4 776-3 776-20 776-21 SHORT 776-22 776-2 JACK RETRACTABLE 776 776-1 776-6 776-5 The TIP on this lead is made of.080" Dia. X 1/2" long brass tip. Threaded 8-32 for attachments. (Nickel plated)... The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring.. The WIRE is 2 conductors of 24 ga. (21 x 36) tinned copper stranding with.220" O.D. Coil size 5/8" 1 foot retracted 5 foot extended. This lead has 2 wires in one coil and is very useful where there is a need for coil cord but not the tangles (1 coil cord, 2 test leads). PAGE 5 6 WIRE LENGTH 18 GA. WIRE 12 WIRE LENGTH 18 GA. WIRE

RATED 1,000 VOLTS 10 AMPS ADJUSTABLE NEEDLE TIP SERIES SAFETY LEAD PART NUMBER AND OTHER STYLES..312.380.360 SHORT 763-7 763-6 763-20 763-21 763-22 763 763-2 JACK 763-1.080 PIN 763-9 JACK 763-8 RETRACTABLE 763-11 STACKABLE 763-3 NOTE : NO ATTACHMENTS CAN BE USED WITH THIS LEAD REPLACEMENT TIP 623-4 REPLACEMENT PROBE 763-30 (COLOR) 763-5.080 PIN 763-10 The TIP on this lead is made of.025" Dia. stainless steel with a polished point and is adjustable to 3.5" and is fully insulated to the point. The PROBE is.312" dia. X 5.25" long molded ABS plastic with.385" dia. safety ring.. The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working. Standard length is 4 feet, Sold as Sets 1 Red and 1 Black lead. RATED 1,000 VOLTS 10 AMPS DELUXE SERIES TEST LEAD KIT PART NUMBER AND OTHER STYLES. PACKAGED IN REUSABLE KIT INCLUDES, SCREW-ON HOOKS - CLIPS - LUGS TIP PROTECTORS TIP EXTENSIONS JACK 767-8 767-5 767-7 767-6 767-20 767-21 767-22 767 767-2 767-1 767-11.080 PIN The TIP on this lead is made of.080" X 5/8" stainless steel with a polished point for insulation piercing, threaded 8-32 for attachments shown above. The PROBE is.312" dia. X 5.25" long molded ABS plastic with.385" dia. safety ring.. The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working. Standard length is 4 feet, Sold as Sets 1 Red and 1 Black lead, includes 2 each of the accessories shown above and is packaged in a reusable plastic pouch. 767-9.312.080 PIN 767-10.380 JACK.360 STACKABLE 767-3 SHORT RETRACTABLE 250 VOLT ½ AMP SUPPLIED WITH LEAD FUSED SERIES SAFETY LEAD PART NUMBER AND OTHER STYLES. FUSE TO LEAD LENGTH 5.312.380.360 SHORT 782-16 782-6 782-20 782-21 782-22 JACK.080 PIN RETRACTABLE STACKABLE 782-3 782-15 782-11 782-17 782-2 782-5 JACK 782-7 782.080 PIN 782-1 The TIP on this lead is made of.080" Dia. X 1/2" long brass tip threaded 8-32 for attachments. (Nickel plated)... The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring.. The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working. Standard length is 4 feet, Sold as Sets 1 Red and 1 Black lead. REPLACEMENT FUSE PART # 2568-1 2568 FUSED SAFETY TEST LEAD KIT (600 VOLTS) PACKAGED IN REUSABLE RETRACTABLE TIP COVERS SILICONE WIRE MODULAR PROBE HANDLE HOUSES 600 VOLT FUSE (INCLUDED) 2568-2 This fused safety test lead kit has a replaceable 600 volt fuse housed in each of the probe handles which have a pointed 4 MM plug style tip with retractable tip cover. The PROBE is 4" molded Nylon plastic with safety ring and retractable tip covers. The WIRE is 18 ga. (65x36) tinned copper stranding, SILICONE insulation.145" Dia.. Standard length is 4 feet, sold with 600 volt fuses included. Replacement Fuse Part # 2568-1 PAGE 6 2568-5.312 2568 2568-4 2568-3 OTHER STYLES

833 MINI CLIP LEAD KIT 833-1 ALLIGATOR CLIP LEAD KIT 2 EACH OF 5 DIFFERENT COLORS, RED, WHITE, YELLOW, GREEN & BLACK (10 LEADS) 1 EACH OF 5 DIFFERENT COLORS, RED, WHITE, YELLOW, GREEN & BLACK (5 LEADS) This is a good quality lead for the money and very useful for most handymen, this lead includes 2 each of 5 different colored, 24 ga. Wire, 2 foot long. Has mini clips and boots on both ends. This is a good quality lead for the money and very useful for most handymen, this lead includes 1 each of 5 different colored, 24 ga. Wire, 1 foot long. Has clips and boots on both ends. 660-8.080 PIN 660-12 PART NUMBER AND OTHER STYLES..080 PIN 660-6 JACK 660-10 SHORT 660-22 660-4 660-11 660.312 660-9 JACK 660-5 MODULAR SERIES SAFETY TEST LEAD KIT.380 660-20.360 660-14 660-21 RETRACTABLE STACKABLE 660-7 RATED 1,000 VOLTS 10 AMPS REUSABLE 660-3 NEEDLE TIP 660-1 LUG 660-2 HOOK 577-5 TIP 491A 458-3 CLIP << PRESS-ON ACCESSORIES This lead has a standard banana plug recessed into the probe handle to allow all of the accessories shown above to plug directly into the probe handle. The PROBE is 4" molded flame retardant ABS plastic with 3/4" safety ring.. The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working. Standard length is 4 feet, sold as Sets 1 Red and 1 Black lead, includes 2 each of the accessories shown above and is packaged in a reusable plastic pouch. 539B S USED IN PAK-5B PAK - 5 TEST LEAD KIT 538 PROBES 537 LEAD 458-1 CLIPS 520 LUGS #10 497-3 HOOKS 539 S USED IN PAK-5 623 EXTENSION TIPS PACKAGED IN REUSABLE This lead features the ability to directly thread all accessories to both ends of the lead and eliminates accidental disconnection. All attachments recess into molded connectors to help reduce the possibility of shock. This lead consists of two 4' leads with threaded connectors on both ends, includes 1 Red and 1 Black of all accessories shown above and is packaged in a reusable plastic pouch. The wire used on this lead is a heavy duty 18 ga. 65 x 36 tinned copper stranding.145" O.D. Rubber insulation. NOTE: To order PAK-5 Kit with recessed plugs use part number PAK-5B. 539B S USED IN BNC-B BNC MODULAR SAFETY TEST LEAD KIT 538 PROBES 458-1 CLIPS PACKAGED IN REUSABLE 520 LUGS #10 497-3 HOOKS 539 S USED IN BNC 623 EXTENSION TIPS 598 CABLE LEAD This lead features the ability to directly thread all accessories to the end of the lead and eliminates accidental disconnection. All attachments recess into molded connectors to help reduce the possibility of shock. The lead comes as you see it above with 1 red and 1 black of all the accessories shown above and is enclosed in a reusable plastic pouch. The BNC lead (598) uses 3' of RG/58 CU shielded cable with 19 x.0071 tinned copper stranding center conductor,.195" O.D. PVC insulation. Rated 50 ohms, 1900 volts, color black, the connector wire is 7 of 18 ga. 65 x 36 tinned copper stranding.145" O.D. Rubber insulation. NOTE: to order BNC Kit with recessed plugs (539B) order BNC-B Kit. PAGE 7

598 KIT USES RG/58 CABLE 490 KIT USES RG/174 CABLE BNC / DUAL MICRO ADAPTER KIT 506 KIT USES RG/58 CABLE 877 KIT USES RG/174 CABLE CABLE LENGTH 3 FEET 24 Ga. 7 LONG.025 SOCKET 4256 HOOK 4359 HOOK 4258 HOOK 4379 CLIP 24 Ga. 7 LONG.025 SOCKET CABLE LENGTH 3 FEET These adapter kits allow micro accessories to be used with BNC or Dual Plug Cables both RG/58 and RG/174. A new method of connecting IC's, test points, wire wrap pins, terminals and other miniature components to BNC RG/58 or RG/174 cable, using a.025 Square Socket Connection. You have your choice of either BNC or Dual plug on one end and includes 1 red 4379 clip, 1 red 4359 pico hook, 1 black 4258 micro hook, 1 black 4256 pincer hook. To order BNC RG/58 Kit use part # 598 Kit. To order BNC RG/174 Kit use part # 490 KIT, For Dual Plug RG/58 Kit use part # 506 Kit. To order Dual Plug RG/174 Kit use Part # 877 Kit. MICRO ADAPTER TEST LEAD KITS THESE KITS USE A.025 SQUARE SOCKET AND PIN CONNECTION 4379 CLIP 4262 4262-1 4258 HOOK 4359 HOOK 793 KIT 4256 HOOK 793 KIT TYPICAL APPLICATION 793-1 KIT TYPICAL APPLICATION 793-1 KIT These micro adapter kits allow accessories that were once reserved for scopes and scope probes to be used with standard test meters and is a new method of connecting IC's, test points, wire wrap pins, terminals and other miniature components to standard leads. The lead (4262) for 793 kit, presses onto any test lead with a.080" dia. Probe tip, and allows the user to attach any of the micro hooks or clips to the end of any standard lead set. The lead (4262-1) for 793-1 kit, allows the user to attach micro accessories to either end. The set includes 1 red, 1 black 4262 lead adapter, 1 red 4379 clip, 1 red 4359 pico hook, 1 black 4258 micro hook, 1 black 4256 pincer hook. 954 MODULAR TEST LEAD KIT 954-1 MODULAR TEST LEAD KIT 769-6S 6 SILICONE 769-6S 6 SILICONE 944-3 CLIP PACKAGED IN REUSABLE 946 PROBE This test lead kit shown above is recommended for electrical, industrial and HVAC applications. The 954 kit comes with 944-3 Clip Probes, 946 Probe Handles and 769-6S 6 with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on each end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp. 944-1 CLAMP PACKAGED IN REUSABLE 946 PROBE This test lead kit shown above is recommended for electrical, industrial and HVAC applications. The 954-1 kit comes with 944-1 Clamp Probes, 946 Probe Handles and 769-6S 6 with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on each end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp. 954-2 MODULAR TEST LEAD KIT 954-3 MODULAR TEST LEAD KIT 769-6S 6 SILICONE 769-6S 6 SILICONE 944-4 HOOK PACKAGED IN REUSABLE This test lead kit shown above is recommended for electrical, industrial and HVAC applications. The 954-2 kit comes with 944-4 Hook Probes, 946 Probe Handles and 769-6S 6 with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on each end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp. PAGE 8 PACKAGED IN REUSABLE 946 PROBE 944-2 PIN PROBE 946 PROBE This test lead kit shown above is recommended for electrical, industrial and HVAC applications. The 954-3 kit comes with 944-2 Pin Probes, 946 Probe Handles and 769-6S 6 with Silicone Insulation, and Shrouded Right Angle 4mm Plugs on each end. Kit is packaged in a reusable plastic pouch. Rated 1,000 volts / 20 amp.

956 TEST LEAD KIT 956-1 TEST LEAD KIT 1501 ECONOMY ELECTRONIC LEAD KIT RUBBER WIRE RUBBER WIRE SILICONE WIRE 946 TIP PROBES 946 TIP PROBES 949-1 CLIPS 769-2S 6 963 CLIPS 667-2 667-3 946 TIP PROBES 513-27 HOOK LEAD 660-1 LUG 968 TEST LEAD KIT SILICONE WIRE 769-2S 6 1500 SUPER ELECTRONIC LEAD KIT 1510 SUPER INDUSTRIAL AUTOMOTIVE KIT 949-1 CLIPS 963 CLIPS SILICONE WIRE 769-2S 6 660-1 LUGS 949-1 CLIPS SILICONE WIRE 769-2S 6 4359 HOOK 946 PROBES 946 TIP PROBES 949-1 CLIPS 949-2 LOW PROFILE CLIPS 4256 HOOK 946 TIP PROBES 963 MINI CLIPS 944-3 CLIP PROBES 4262-2 MICRO LEADS 513-27 HOOK LEADS 944-3 CLIP PROBES 660-1 LUGS 992-1 HEAVY DUTY HOOKS WITH NEEDLE 1520 SUPER DELUXE TELECOM LEAD KIT SILICONE WIRE 958 DELUXE TEST LEAD KIT SILICONE WIRE 949-1 CLIPS 769-2S 6 769-2S 6 949-1 LARGE CLIPS 946 TIP PROBES 944-1 CLAMP PROBES 963 CLIPS 820 TELE. CLIPS 521-1 ADAPTERS 513-27 HOOK LEADS 946 TIP PROBES 660-1 LUGS LEFT TO RIGHT 944-1 CLAMP PROBES 944-3 CLIP PROBES 944-2 PIN PROBES 944-4 HOOK PROBES 1511 ECONOMY INDUSTRIAL / AUTOMOTIVE LEAD KIT SILICONE WIRE 1521 ECONOMY TELECOM TEST LEAD KIT SILICONE WIRE 769-2S 6 769-2S 6 949-1 CLIPS 949-1 CLIPS 521-1 ADAPTOR (RED) 660-1 LUGS 946 BANANA TIP PROBES 992-1 HOOK WITH NEEDLE RED ONLY PAGE 9 820 TELEPHONE TYPE CLIP (RED) 660-1 LUGS 946 BANANA TIP PROBES

2536 TEST LEAD KIT 518-26 TEST LEAD KIT 667-3 518-6 S WITH NEEDLE TIP PROBES SCREW-ON 40 AMP BLACK CLIP 945 PIN PROBES 20 AMP BATTERY CLIP SET 518-27 TEST LEAD KIT 518-28 TEST LEAD KIT 518-2 STRAIGHT S WITH NEEDLE TIP PROBES STRAIGHT S WITH RED NEEDLE TIP PROBE AND 40 AMP BLACK CLIP SCREW-ON 40 AMP CLIP SET 997 TEST LEAD KIT 997-1 TEST LEAD KIT 532-2 532-2 946 PROBES 944-4 RED HOOK 946 PROBES 944-4 RED HOOK 660-1 LUGS 458-4 ALLIGATOR CLIP SET 660-1 LUGS 458-4 ALLIGATOR CLIP SET 814 MINI HOOK LEAD 876 TEST LEAD HOLDER 814-1 (LENGTH & COLOR) INCLUDES HOOK ON ONE END ONLY. This mini lead uses 24 ga. Miniature test lead wire ( 45 x 40 ) tinned copper stranding with rubber insulation.066" Dia. Colors available red, black, green, white & yellow. Standard lengths are 8", 12", 24", 36". Sold by color & length. Other lengths are available upon request. PAGE 10 This test lead holder measures 5.250" wide by 3" high and has 6 slots 3.250" deep for leads, the holder also has 2 screw holes for wall mounting. Color is blue.

TELEPHONE STYLE CLIP LEADS PART NUMBER AND OTHER STYLES. JACK 812-5 812-10.312.380.360 SHORT 812-7 812-6 812-20 812-21 812-22 812-1 812-2 812-3 812-4 812-11 812-13.080 PIN MINI.105 JACK 812-12 812-14 JACK MINI 812-8.080 PIN MINI 812-16 RETRACTABLE TELEPHONE CLIP 812 STACKABLE NOTHING ON END 812-9 THIS HEAVY DUTY CLIP HAS A SINGLE PENETRATING PIN FOR INSULATION PIERCING, ALSO HAS A CLUSTER OF NEEDLES ALONG WITH ANGLED JAW. This lead has a telephone style clip & boot on one end with a single penetrating pin for insulation piercing and a cluster of hardened needles for a sure connection on groups of wires, also has an angled jaw for hard to reach areas. The other end has various type connections to fit any meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding.120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black. PART NUMBER AND OTHER STYLES. HOOK SERIES LEADS JACK 513-9 513-10.312.380.360 SHORT 513-11 513-12 513-20 513-21 513-22 513-16 513-13 548 513-14 513-17 513-18.080 PIN 513-15 MINI 513-25 JACK MINI 513-1.080 PIN RETRACTABLE HOOK 513-19 STACKABLE NOTHING ON END 513-26 This lead has a 2.5" hook on one end which is made of molded nylon and gold plated hook with various other connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding.120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black. PART NUMBER AND OTHER STYLES. EXTENDED HOOK STYLE LEADS JACK 813-5 813-10.312.380.360 SHORT 813-7 813-6 813-20 813-21 813-22 813-1 813-2 813-3 813-4 813-11 813-15.080 PIN 813-12 MINI 813-8 JACK MINI 813-14.080 PIN RETRACTABLE EXTENDED HOOK 813 STACKABLE NOTHING ON END 813-9 This lead has a 4.5" hook on one end which is made of molded nylon and gold plated hook with various other connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding.120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black, single leads of different lengths can be ordered separately. PART NUMBER AND OTHER STYLES. STACKABLE SERIES TEST LEADS JACK 527-5 527-9.312.380.360 SHORT 527-7 527-6 527-20 527-21 527-22 JACK.080 PIN RETRACTABLE STACKABLE 527-1 527-2 527-3 527-4 527-10 527.080 PIN 527-8 PAGE 11 NOTHING ON END 527-11 This lead has a molded polyethelene stackable standard plug on one end with various other connections on the other end to fit any type of meter or connector. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot. These leads are sold as Sets 1 Red and 1 Black, single leads of different lengths can be ordered separately.

ALLIGATOR CLIP LEADS PART NUMBER AND OTHER STYLES. JACK 510-3 510-7.312.380.360 SHORT 510-4 510-2 510-20 510-21 510-22 JACK.080 PIN RETRACTABLE STACKABLE 550 510-1 565 510-5 510-11 534.080 PIN 510-6 ALLIGATOR CLIP 510 NOTHING ON END 510-12 This lead has an alligator clip & boot on one end which is made of nickel plated steel, ( available in copper) with PVC boot and has various other connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot. These leads are sold as Sets 1 Red and 1 Black. Other lengths available.. MINIGATOR CLIP LEADS PART NUMBER AND OTHER STYLES. JACK 511-8 511-9.312.380.360 SHORT 511-10 511-12 511-20 511-21 511-22 511-1 511-2 511-3 511-4 511-11 543.080 PIN MINI.105 JACK JACK MINI.080 PIN MINI RETRACTABLE MINIGATOR CLIP NOTHING ON END STACKABLE 511-13 574 511-6 511-5 511 511-14 This lead has a minigator clip & boot on one end which is made of nickel plated steel, ( available in copper) with PVC boot and has various other connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding.120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black. Other lengths and colors (Green, White, Yellow & Blue). THIS LEAD IS ALSO AVAILABLE USING 14 Ga. WIRE. RED OR BLACK BATTERY STYLE CLIP TEST LEADS PART NUMBER AND OTHER STYLES. JACK 604 607-1.312.380.360 SHORT 607 604-1 604-20 604-21 604-22 603 499-1 606-1 609-1 603-11 605.080 PIN 609 MINI 608 JACK MINI 476-8.080 PIN RETRACTABLE BATTERY CLIP 602 STACKABLE NOTHING ON END This lead has a 20 AMP battery clip & boot on one end which is made of nickel plated steel, ( available in copper) with PVC boot and has various other connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding.120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black. 764-5 CROCODILE CLIP LEADS PART NUMBER AND OTHER STYLES. JACK 570 570-3.312.380.360 SHORT 570-2 570-1 570-20 570-21 570-22 572 572-1 572-3 571-1 572-11 610.080 PIN 571 MINI 764-3 This lead has a crocodile clip & boot on one end which is made of nickel plated steel, with PVC boot and has various other connections on the other end to fit any type of meter or connection. The wire on standard leads is 18 ga. (65 x 36) tinned copper stranding.145" O.D. RUBBER insulation. Mini leads use 20 ga. (41 x 36) tinned copper stranding.120" O.D. RUBBER insulation. All standard leads are available in SILICONE wire (440 x.002) copper stranding.145" O.D. To order silicone just add "S" to the part number. Stocked length is 4 foot for standard leads, 3.5" for mini leads. These leads are sold as Sets 1 Red and 1 Black.. PAGE 12 JACK.080 PIN CROCODILE CLIP 764 RETRACTABLE #10 LUG 592 STACKABLE NOTHING ON END 764-6

COIL CORD JUMPER LEADS MOLDED Y 18 GA. RUBBER WIRE 6 LONG 2 CONDUCTOR COIL CORD 1 FOOT RETRACTED, 5 FOOT EXTENDED 776-23 R/A SHROUDED TO BANANA JACK 776-25 R/A SHROUDED TO R/A 776-27 R/A.380 SHROUDED TO STRAIGHT SHROUDED 776-24 R/A TO ALLIGATOR CLIP 776-26 STRAIGHT TO R/A 2602 EXTENDED PROBE TEST LEAD SERIES 776-28 STRAIGHT TO R/A SHROUDED 15 PROBES 2602 JACK 2602-1 2602-2 2602-5.312 2602-6 2602-7 JACK 2602-8 PART NUMBER AND OTHER STYLES. SHORT 2602-22 The TIP on this lead is made of.080" Dia. X 5/8" long stainless steel with a polished point. (Nickel plated). The PROBE is 15" LONG For hard to reach areas. The WIRE is 18 ga. (65x36) tinned copper stranding, rubber insulation.145" Dia. 20KV breakdown 5KV working. Standard length is 5 feet, Sold as Sets 1 Red and 1 Black. 992-1 AUTOMOTIVE TYPE HOOK ADAPTER LEAD 982-1 GRIPPER ADAPTER LEAD.100" BANANA JACK S INTO ANY LEAD WITH BANANA OF ANY TYPE. 5.5" HOOK WITH INSULATION PIERCING NEEDLE. 6" OF 20 GA. PVC INSULATED TEST LEAD WIRE 2.160" GRIPPER HOOK.185" JACK S INTO ANY LEAD WITH OF ANY TYPE. This lead is very useful where a heavy duty hook is needed. This lead accessory has an insulation piercing tip in the hook base. The other end has a standard banana jack which fits any standard banana plug, recessed or standard. The wire used is 6" of heavy duty 18 ga. 65 x 36 tinned copper stranding.140" O.D. MATERIAL = Molded nylon with nickel silver contact. SOLD = as 1 lead. Colors available are Red or Black. This lead is very useful where hard to make connections are required. The narrow size allows close side by side connection for high density IC's. The hook has 2 blades that are connected directly to the wire and are shaped to make a secure connection. The other end has a standard banana jack which fits any standard banana plug, recessed or standard. The wire is 6" of 20 ga. PVC wire.100" O.D. MATERIAL = Molded nylon with stainless steel blades. SOLD = as 1 lead. Colors available are Red or Black. 513-27 HOOK ADAPTER LEAD 2567 TEST LEAD EXTENSION 2.250" HOOK BANANA JACK S INTO ANY LEAD WITH BANANA OF ANY TYPE. 6" OF 18 GA. RUBBER INSULATED TEST LEAD WIRE This hook lead permits direct hook-up either vertically or horizontally over square wire wrap pins. The other end has a standard banana jack which fits any standard banana plug, recessed or standard. The wire used is 6" of 18 ga. RUBBER wire.140" O.D. MATERIAL = Molded nylon with gold plated beryllium copper hook. SOLD as 1 each. Colors available, Red or Black. PAGE 13 This lead adapter allows the user to add 4' to any test lead that has a recessed standard banana plug. The WIRE is 4' of 18ga. (65x36) tinned copper stranding, RUBBER insulation.145" Dia. Wire is rated 20KV breakdown, 5KV working. SOLD as 1 Set. Red and Black.

JUMPER LEADS FIRST END 18 Ga. LEAD WIRE PART # 532 667 FIRST END 14 Ga. LEAD WIRE PART # FIRST END COIL CORD LEAD WIRE PART # 2576 857 2577 858 SECOND END PART # -3-2 UNLESS SPECIFIED THESE LEADS ARE SOLD AS SINGLE LEADS 4 FEET LONG, WITH COLORS RED OR BLACK. PART NUMBERS 532, 667, 547 & 768 ALSO AVAILABLE IN GREEN, BLUE, YELLOW & WHITE..080" PIN 3/4" LONG 547 768 2578 859 2579 860-1 -9 THESE LEADS ARE ALSO AVAILABLE WITH SILICONE WIRE, JUST ADD " S " TO THE PART NUMBER. STACKABLE 2522 2580 N/A -19 STACKABLE 2594 2595 N/A -20 549 2581 861-5 *THESE LEADS USE 20 GA. RUBBER INSULATED WIRE 42" LONG. OTHER LENGTHS AVAILABLE UPON REQUEST, NOT AVAILABLE WITH COIL CORD... 769 2582 862-6.312" 850 2583 863-12.380" LEAD SHOWN 532-2.360" 851 2584 864-13 18 GA. HEAVY DUTY RUBBER WIRE 852 2585 865-14 SHORT 770 2586 866-8 JACK 771 2587 867-7 FITS SIMPSON.080" PIN 772 2588 868-10 LEAD SHOWN 2522-19 * * * 838 853 MINI BANANA 854 MINI BANANA 855 MINI JACK.105" DIA. 2589 N/A N/A N/A N/A N/A N/A N/A -11 RETRACTABLE -15-16 -17-0 NOTHING ON END 18 GA. HEAVY DUTY RUBBER WIRE These jumper leads are available in 4 different styles of wire. Style 1 is 20 ga. (41 x 36 ) tinned copper stranding.120" Dia. Rubber insulation. Style 2 is 18 ga. ( 65 x 36 ) tinned copper stranding.145" Dia. Rubber insulation, another option is 14 ga. ( 79 x 45 ) tinned copper stranding.145 O.D. Style 3 is18 ga. ( 440 x.002 ) copper stranding.145" SILICONE insulation. Standard length 4'. Other lengths available upon request. Style 4 is coil cord, 20 ga. ( 65 x 36 ) tinned copper stranding.165" Dia. Neoprene insulation, 1' retracted, 5' extended, coil size.750". Available in Black and Red coils only. PAGE 14

994 ADAPTOR LEAD 4379 MINIGATOR CLIP WITH.025 PIN CONNECTOR 1.625" This adaptor lead set is replacement for the B&K Precision # FP-6. Has standard banana plugs on one end and 2.5" hooks on other. WIRE is 20 ga. (41 x 36) tinned copper stranding with PVC insulation... Standard length is 4 feet, SOLD as Sets 1 Red, 1 Black and 1 Green This minigator clip has a.025" square pin for direct connection to square socket on wire (Oldaker part # 4262 & 4262-1). MATERIAL = Nickel plated steel clip with molded PVC boot. SOLD = as 1 each. Red Only. 947 MINIATURE GRIPPER 948 SPRING LOADED PIN PROBE BENDS 35 o 2.125" This bendable, clamp style, rotating gripper can also be used with leads 4262 and 4262-1. It is well suited for use with surface mount devices, and has extremely thin wires, can bend 35 degrees and still remain fully operable. It has two.025" square pins to plug into leads and is rated 42V. SOLD as 1 each. Red or Black. SPRING LOADED This.030" dia. Needle point pin probe is made of stainless steel for durability and is spring loaded for reliability and accuracy. It has a.025" square pin to fit leads 4262 and 4262-1. Rated 50V. SOLD as 1 each. Red or Black. 961-1 TWEEZER LEAD 961-2 TWEEZER LEAD 18 Ga. WIRE LENGTH 5 BANANA S The tweezers lead is an easy way to test surface mount devices (SMD) and allows the user one hand testing. Tips are gold plated, durable and assure positive electrical connection. Maximum voltage rating is 250 VRMS @ 3 Amps. The cable is RG/174U. Lead length 4 feet. 765 BNC FEMALE BREAKOUT LEAD BNC MALE The tweezers lead is an easy way to test surface mount devices (SMD) and allows the user one hand testing. Tips are gold plated, durable and assure positive electrical connection. Maximum voltage rating is 250 VRMS @ 3 Amps. The cable is RG/174U. Lead length 4 feet. 775 BNC MALE BREAKOUT LEAD NOTHING ON END -0 MINI HOOK -5 NOTHING ON END -0 MINI HOOK -5 ALLIGATOR CLIP MINIGATOR CLIP -1-2 STACKABLE STACKABLE ALLIGATOR CLIP MINIGATOR CLIP HOOK HOOK -3-4 -1-2 -3-4 The wire on these breakout leads is 20 ga. (41 x 36) tinned copper stranding with PVC insulation. The BNC Female connector has gold plated center contacts with a black polyethelene housing. Red wire connected to center conductor. To order add the dash number of the type of connection you want on the other end. PAGE 15 The wire on these breakout leads is 20 ga. (41 x 36) tinned copper stranding with PVC insulation. The BNC Male connector has gold plated center contacts with a black polyethelene housing. Red wire connected to center conductor. To order add the dash number of the type of connection you want on the other end.

OTHER STYLES LISTED BELOW 506 SERIES BREAKOUT LEAD 7", 18 GA. HEAVY DUTY RUBBER INSULATED WIRE 3 FEET RG/58, 50 OHM CABLE OTHER LENGTH AVAILABLE UPON REQUEST. 3/4" DUAL STACKABLE BANANA..080 PIN 506-14 506-8 MINIGATOR CLIP 506-3 STACKABLE RETRACTABLE 506-7 506-4 506-11 HOOK EXTENDED HOOK MINI HOOK 506-5 506-9 506-10 ALLIGATOR CLIP 506-2 NOTHING ON ONE END. 506-6 OTHER STYLES LISTED BELOW 598 SERIES BREAKOUT LEAD 7", 18 GA. HEAVY DUTY RUBBER INSULATED WIRE 3 FEET RG/58, 50 OHM CABLE OTHER LENGTH AVAILABLE UPON REQUEST. BNC MALE GOLD CENTER PIN MOLDED STRAIN RELIEF AVAILABLE IN OTHER COLORS 5981 SERIES.080 PIN MINIGATOR CLIP 598-12 598-7 598-3 STACKABLE RETRACTABLE 598-6 598-10 598-4 AVAILABLE WITH BOOT THAT COMPLETELY COVERS BNC, AVAILABLE IN COLORS HOOK EXTENDED HOOK MINI HOOK 598-1 598-9 598-8 ALLIGATOR CLIP 598-2 KELVIN CLIP 598-13 NOTHING ON ONE END. 598-5 OTHER STYLES LISTED BELOW 766 SERIES BREAKOUT LEAD 7", 18 GA. HEAVY DUTY RUBBER INSULATED WIRE 3 FEET RG/58, 50 OHM CABLE OTHER LENGTHS AVAILABLE UPON REQUEST. MOLDED STRAIN RELIEF AVAILABLE IN OTHER COLORS BNC FEMALE GOLD CENTER PIN.080 PIN 766-11 766-7 HOOK 766-4 MINIGATOR CLIP 766-2 EXTENDED HOOK 766-9 STACKABLE 766-6 766-3 766-10 MINI HOOK 766-8 ALLIGATOR CLIP 766-1 RETRACTABLE NOTHING ON ONE END. 766-5 CABLE DESCRIPTION The cable used on the above leads is RG/58, center conductor is (19 x 0071) tinned copper stranding.195" O.D. PVC insulation Cap=29.5 PF/FT, color black. 490 SERIES BREAKOUT LEAD OTHER STYLES LISTED BELOW 7", 24 GA. RUBBER INSULATED WIRE HOOK 490-1 MINI HOOK 490-4 KELVIN CLIP 490-13 BNC MALE 3 FEET RG/174, 50 OHM CABLE OTHER LENGTHS AVAILABLE UPON REQUEST. ALLIGATOR CLIP 490-2 MINIGATOR CLIP 490 4901 SERIES AVAILABLE WITH BOOT THAT COMPLETELY COVERS BNC, AVAILABLE IN COLORS NOTHING ON ONE END. 490-3.080 PIN 490-12 CABLE DESCRIPTION The cable used on this lead is RG/174, center conductor is (7 x 34) tinned copper stranding.125" O.D. PVC insulation Cap=30.0 PF/FT, color black. PAGE 16

LENGTH ON THESE LEADS IS 3', OTHER LENGTHS AVAILABLE UPON REQUEST BNC / DUAL LEADS BNC MALE & BNC FEMALE LEADS AVAILABLE WITH DIFFERENT COLOR STRAIN RELIEFS. ORANGE, GREEN, YELLOW, BLUE, BROWN, GREY, PURPLE, BLACK, RED. 541-2 = RG/58 541-3 = RG/59 541-4 = RG/174 GOLD PLATED PIN OTHER COLOR STRAIN RELIEFS AVAILABLE BLACK, RED, GREEN, YELLOW, BLUE, WHITE 621-1 = RG/58 621-2 = RG/59 GOLD PLATED SOCKET OTHER COLOR STRAIN RELIEFS AVAILABLE BLACK, RED, GREEN, YELLOW, BLUE, WHITE 622-1 = RG/58 622-2 = RG/59 GOLD PLATED SOCKET OTHER COLOR STRAIN RELIEFS AVAILABLE BLACK, RED, GREEN, YELLOW, BLUE, WHITE BNC MALE OTHER COLOR BOOTS AVAILABLE, BLACK, RED, GREEN, YELLOW, BLUE, WHITE 541 = RG/58 BNC MALE GOLD PLATED PIN 3/4" DUAL STACKABLE BANANA. 766 = RG/58 GOLD PLATED SOCKET 3/4" DUAL STACKABLE BANANA. 559 = RG/58 599-1 = RG/174 GOLD PLATED PIN 3/4" DUAL STACKABLE BANANA. 506-1 = RG/58 506 = ZIP CORD 506-13 = RG/174 CABLE DESCRIPTION RG/58 cable has a center conductor of (19 x 007) tinned copper stranding.195" O.D. Insulation, dielectric is 116P nom, Cap 29.5 PF/Ft. Maximum operating voltage 1900-50 ohms, temp. Rating -55c to +90c. Color Black. RG/59 cable has a center conductor of 22 ga. copper stranding.242" O.D. Insulation, dielectric is 146P nom, Cap 21 PF/Ft. Maximum operating voltage 2300-75 ohms, temp. Rating -40c to +80c. Color Black. RG/174 cable has a center conductor of (7 x 34) tinned copper stranding.105" O.D. PVC Insulation, dielectric is 116P nom, Cap 30.0 PF/Ft. Maximum operating voltage 1500-50 ohms. Temp rating -100c to +300c. Color Black. PAGE 17

944 SERIES PROBES The Oldaker 944 series test probes are designed to provide utmost user safety. The 1000V products are based on the Rigid Sleeve principle: Each probe has a socket that accommodates a standard banana plug either standard, shrouded or retractable. The sleeve that surrounds the sides of the 4mm socket is insulated to keep fingers from the test area to insure a shock proof connection to 1000V. Choose from a variety of grip, pierce, clamp and hook types to find the right probe for your test and measurement applications. The 944-1 features 2 rotating, clamp-style tongs for securely grabbing pins and wires with diameters of up to 5/32". And, thanks to the special shrink - tubing on the flexible shaft, this and all 944 probes are resistant to solder iron heat and high temperatures. Sold as RED or BLACK. FLEXABLE 944-1 The 944-2 features a clamp-style probe with spring-loaded, stainless-steel pin that allows the user to pierce wires without removing the insulation or causing any damage to the wire. This part pierces wires up to.138" O.D. Sold as RED or BLACK The 944-3 features a special wide-opening jaw which opens to 7/8" to accommodate a large range of test connectors in R & D labs, workstations and service departments. When the plunger is pressed the jaws simultaneously open and extend from the probe body, then close to make a tight, reliable connection. Sold as RED or BLACK The 944-4 is the perfect tool for electricians and repair technicians working in hard-to-reach spaces. Its spring-loaded hook extends to a full 7/32" before retracting for a secure grip around the test point.. Sold as RED or BLACK 944-2 944-3 944-4 945 PROBES 945-1 TIP PROTECTOR The 945 provides precise contact with the area being tested. Its tapered, durable steel tip (9/32" long) is perfect for penetrating insulated and backing layers on PC boards. An anti-shorting clear cap (Oldaker P/N 945-1) can be purchased separately for fine pitch testing... Sold as 1 each, RED or BLACK. 946 PROBES The 946 combines testing and measurement functions in one handy tool. Its rugged, dual-function test tip is equally suitable for penetrating insulating and backing layers of printed circuit boards or for inserting directly into 4mm dia. sockets... Sold as 1 each, RED or BLACK. 949-2 LOW PROFILE INSULATED CLIP 949-1 LARGE JAWED INSULATED CLIP The 949-2 is an insulated clip that attaches to standard 4mm shrouded plugs and is low profile, the center of the jaw clamps pins up to 3/8" dia. while the teeth at the front of the jaw are designed to accommodate extremely fine wires... Sold as 1 each, RED or BLACK. 963 MINI INSULATED CLIP The 963 clip is an insulated minigator with standard banana jack to fit shrouded or exposed plugs... SOLD as 1 each, RED or BLACK. PAGE 18 The 949-1 is an insulated clip that attaches to standard 4mm shrouded plugs and has an expanded clamping range of 1", making it especially useful in a wide range of heavy duty electrical, automotive, marine, aviation and industrial test measurement applications... Sold as 1 each, RED or BLACK.

.150" 497-3 HOOK-IT THREADED 8-32 520 LUG ADAPTER.175".027" TYPICAL APPLICATION 2.250" This 8-32 threaded Hook-It attaches directly onto any test probe tip with matching threads and allows the user to attach lead to any small connector. MATERIAL =.028" silver coated beryllium copper wire with nickel plated brass insert and molded nylon housing. SOLD as Sets 1 Red and 1 Black. 498 TIP PROTECTOR This threaded adapter converts any 8-32 threaded probe tip to a #10 lug. MATERIAL = #10 lug with nickel plated brass insert threaded 8-32 and molded ABS insulator. SOLD as Sets 1 Red and 1 Black. 458-4 ALLIGATOR CLIPS FIT 4 mm BEFORE PROTECTS USER FROM SHORTING OUT TIP... AFTER MATERIAL = Polypropelene. SOLD = as Sets 2 Red and 2 Black. 458-1 THREADED CLIPS This alligator clip set fits any standard recessed 4mm plug. MATERIAL = Nickel plated steel. SOLD = Part # 458-4 is Sold as Sets, 1 Red and 1 Black. 820 THREADED TELEPHONE STYLE CLIP TYPICAL APPLICATION This 8-32 threaded alligator clip (149-2) attaches directly to threaded probe. MATERIAL = Nickel plated steel with 8-32 threaded end. The Boot (226) is PVC. SOLD = Part # 458-1 is Sold as Sets, 1 Red and 1 Black. 458-3 ALLIGATOR FITS 4 MM S This clip set threads directly onto any lead with an 8-32 threaded tip, and adds the ability to clip onto larger parts. Clip length is 2 19/32" x 15/16" high and has a PVC boot. Sold as Sets 1 Red and 1 Black, can be ordered separately. 521 ADAPTER THIS ADAPTER FITS NON S ONLY This alligator clip set fits any standard 4mm plug. MATERIAL = Nickel plated steel. SOLD = Part # 458-3 is Sold as Sets, 1 Red and 1 Black. 521-1 ADAPTER This threaded adapter converts any standard banana plug to a threaded connection and allows the user to thread on any of the Oldaker adapters directly to the plug end and changes meter lead to a jumper lead. MATERIAL = nickel plated brass with molded in polyethelene insulator. SOLD as Sets 1 Red and 1 Black. 623 & 623-3 THREADED EXTENSION TIPS 623 5" THIS ADAPTER FITS NON S ONLY This threaded adapter converts any standard banana plug, recessed or exposed, to a threaded connection and allows the user to thread on any of the Oldaker adapters directly to the plug end and changes meter lead to a jumper lead. MATERIAL = nickel plated brass with molded in polyethelene insulator. SOLD as Sets, 1 Red and 1 Black. PAGE 19 623-3 3.25 These extended tips thread onto any standard probe tip with 8-32 threads, and allows the user to reach difficult areas, it also has a stainless steel tip with a polished point for insulation piercing or penetrating coated connections. The tip is fully insulated to the point with cut resistant clear shrink tubing, to prevent shorting. MATERIAL =.045" Dia stainless steel needle tip. 623 is 5 long, 623-3 is 3.25 long. The base is nickel plated brass with 8-32 threads and is molded in polyproplene. SOLD as Sets 1 Red and 1 Black.

966 TO ADAPTER INSERT BOTH S IN EACH END OF THE ADAPTER. This adapter has standard banana jacks on each end and allows the user to attach any lead with a standard banana plug, (shrouded or exposed) to the end of another standard banana plug lead which will extend a standard 4' lead to 8'. (See Diagrams Above). Sold as Sets, 1 Red and 1 Black. 966-2 PROBE ADAPTER -IN ACCESSORY THREADED PROBE PRESS ATTACHMENT ONTO END OF ADAPTER. 966-2 ADAPTER This adapter threads onto any lead with an 8-32 threaded tip and allows the user to attach any of the Oldaker 944 series heavy duty lead accessories to any of the Oldaker standard lead sets (See Illustrations Above). This adapter also accepts The Oldaker insulated clip 949 series and if required Oldaker Part Numbers 945 & 946 can also be attached. Sold as Sets, 1 Red and 1 Black. 966-1 TEST LEAD EXTENSION 966 ADAPTER KIT TO METER USER TYPICAL APPLICATION 4' LEAD 4' LEAD 966-1 ADAPTER One end of this adapter threads onto any probe with an 8-32 threaded tip and allows the user to attach any lead with a standard banana plug, (shrouded or exposed) to the other end which will extend a standard 4' lead to 8'. (See Diagrams Above). Sold as sets, 1 Red and 1 Black. 815 BED OF NAILS CLIP This complete adapter kit has 1 set of all the adapters shown on this page. The kit includes 1 red and 1 black of each of the following adapters, 521-1, 966, 966-1 and 966-2. The kit comes packaged in a reusable plastic pouch. 149-2 THREADED ALLIGATOR CLIP 815-1 BOOT USES 226 BOOT This heavy duty 2.625 telephone type clip has a cluster of hardened needles and also a single pin for extra secure connection and a wide opening jaw (1.312"). 815 is Sold as 1 Clip. 815-1 Boot is Sold as 1 Boot, Red or Black. 149 ALLIGATOR CLIP This 8-32 threaded alligator clip attaches directly to threaded probe. MATERIAL = Nickel plated steel with 8-32 threaded end. SOLD = Part # 149-2 is sold as 1 Clip. Part # 226 is Sold as 1 Boot, colors available are red, black, blue, green, yellow & white. 149-4, 458-5 ALLIGATOR CLIP FITS PIN USES 226 BOOT USES 226 BOOT This alligator clip can be soldered or crimped directly to wire. MATERIAL = Nickel plated steel. SOLD = Part # 149 is Sold as 1 Clip. Part # 226 is Sold as 1 Boot, colors available are red, black, blue, green, yellow & white.. PAGE 20 This Mueller #60PR clip attaches directly to.080 pin plug. MATERIAL = Nickel plated steel. Part # 149-4 is Sold as 1 Clip. Part # 226 is Sold as 1 Boot, colors available are red, black, blue, green, yellow & white.. Also Available, Part # 458-5, Which is Clip & Boot assembled and Sold as Sets 1 Red & 1 Black.

249 MINI CLIP 668 CROCODILE CLIP USES 277A BOOT USES 680 BOOT This Mueller #30BL clip is made of nickel plated steel and can be crimped or soldered. 249 clip is Sold as 1 Clip. Part # 277A is Sold as 1 Boot, please specify color, Red or Black. 170 10 AMP CLIP This Mueller #85 crocodile clip has a screw for attaching wire. Clip is made of plated steel. 668 clip is sold as 1 Clip. Part # 680 is Sold as 1 Boot. Colors available are red, black, green, blue, yellow & white. 170-1 20 AMP CLIP USES 684 BOOT USES 684-1 BOOT 170C IS COPPER CLIP 170-1C IS COPPER CLIP This Mueller #48B clip is plated steel with screw connection. 170 is Sold as 1 Clip. Part # 684 is sold as 1 Boot, please specify Red or Black. 170-2 40 AMP CLIP This Mueller #27 clip is plated steel with screw. 170-1 is Sold as 1 Clip. Part # 684-1 is Sold as 1 Boot, please specify Red or Black. 170-3 50 AMP CLIP USES 684-2 BOOT USES 684-3 BOOT 170-2C IS COPPER CLIP This Mueller #25 clip is plated steel with screw. 170-2 is Sold as 1 Clip. Part # 684-2 is sold as 1 Boot, please specify Red or Black. This Mueller #21A clip is plated steel with screw. 170-2 clip is Sold as 1 clip. 684-3 boot is Sold as 1 boot of one color, please specify Red or Black. 977 STUB NOSE CLIP 454 HOOK ATTACH WIRE BODY PLUNGER 2.250" This Mueller #46A clip is plated steel with crimp connection and plastic handles. 977 clip is Sold as 1 clip, please specify Red or Black. This hook is field repairable and permits direct hook-up either vertically or horizontally over square wire wrap pins. and is available in 10 different colors, red, black, brown, orange, yellow, green, blue, violet, grey & white. MATERIAL = Gold plated beryllium copper conductor with molded nylon housing. SOLD as 1 Each, Select Color. 816 EXTENDED HOOK ATTACH WIRE 817 MINI MICRO HOOK BODY PLUNGER 1.750" 5.000" This 5" hook is field repairable and permits direct hook-up either vertically or horizontally over square wire wrap pins. MATERIAL = Gold plated beryllium copper with molded nylon housing. SOLD as 1 Each Red Or Black. PAGE 21 This hook is field repairable and is designed for difficult IC test connections. Lightweight (less than 1 gram) and finger-eze Hypo Action permits direct hook-up to delicate wires where weight & leverage may damage component. Available in 10 different colors, red, black, brown, orange, yellow, green, blue, violet, grey & white. MATERIAL = Gold plated beryllium copper conductor with molded nylon housing. SOLD as 1 Each, Select Color...

.100" Oldaker 982 DOUBLE GRIPPER 4258 MICRO HOOK WITH.025 PIN.185" 2.160" This hook is designed for hard to make test connections with different shapes and sizes. The narrow size allows close side by side connection for high density IC's. The hook has 2 blades that are connected directly to the wire and are shaped to make a good connection, and is field repairable. Available in red, black, blue, green, yellow & white. Material = molded nylon with stainless steel blades. Sold = as 1 Each, Select Color..060".018" DIA..090" 4256 DBL-GRIPPER WITH.025 PINS.016".013".100" 1.75" This micro hook is designed for difficult IC test connections. Has.025" square pin connector which plugs directly onto wire socket. MATERIAL = Molded nylon with gold plated center contact. SOLD as 1 Each, available in 10 colors brown, black, red, orange, yellow, green, blue, violet, gray & white. 4359 PICO HOOK WITH.025 PIN 2.250" This double grip hook assures solid positive connection and with a narrow configuration (.050" wide) makes it ideal for side by side stacking. It also has dual.025" square pins for plug in connection, its spring loaded design is easy to use and assures solid positive contact. MATERIAL = Molded Nylon. SOLD as 1 Each. Available in 10 different colors, black, brown, red, orange, yellow, green, blue, violet, gray & white. 992 AUTOMOTIVE TYPE HOOK 1.420" This pico hook has one.025" square pin which plugs into wire socket and is designed for direct connection to a single leg of a DIP or other components with a maximum diameter of.025". MATERIAL = Molded nylon with gold plated center contact. SOLD as 1 Each. Available in 10 colors, brown, black, red, orange, yellow, green, blue, violet, gray & white. 491 SOLDER & PRESS 4 mm USE INSULATOR 457C FOR BANANA. RATED 15 AMP.192" 5.5" USE INSULATOR 457B FOR BANANA. 1.062" This heavy-duty test hook is ideal for automotive testing, solder connection. Has sharp point in hook for sure contact. Available in black, brown, blue, orange, yellow, grey and white. MATERIAL = Molde nylon with nickel silver contact. SOLD as 1 Each. 491B THREADED 4 mm This standard banana plug fits.175" Dia. Jack and must be soldered onto wire and pressed into insulator 457B (recessed) or 457C (standard). Material = knurled nickel plated brass body with nickel silver contacts. Sold = as 1 Plug. 491A STACKABLE 4 mm RATED 15 AMP..257" DIA. THREADED 8-32 RATED 15 AMP..250" O.D. DRILLED.166" DIA. 1.062" This standard banana plug fits.175" Dia. Jack and is threaded 8-32. NOTE = This is a stand alone plug, no insulator. Material = knurled nickel plated brass body with nickel silver contacts. Sold = as 1 Plug. 284-3.080 PIN This standard stackable banana plug fits.175" Dia. And has.166" Dia hole in back. NOTE = This is a stand alone plug, no insulator. Material = knurled nickel plated brass body with nickel silver contacts. Sold = as 1 Plug. 1.5" 450 MINI RATED 10 AMP. USE INSULATOR 457C FOR PIN..080".187" DIA. USE INSULATOR 457C FOR MINI..187" DIA..540" 1.5" This standard pin plug has a.080" Dia. Pin and must be soldered onto wire and pressed into insulator 457C. MATERIAL = Nickel plated brass. SOLD = as 1 Pin Plug. PAGE 22 This mini plug fits a.105" jack and must be soldered onto wire and pressed into insulator 457C. MATERIAL = Nickel plated brass body with nickel silver contacts. SOLD = as 1 Mini Plug.

456C 4 MM BANANA JACK & 456D THREADED JACK 457B INSULATOR FOR 491 S. 457D INSULATOR FOR 456C & 456D JACKS Use Insulator 457D For Both 456C & 456D.187" O.D..750" 1.5" The 456C banana jack accepts any standard banana plug. The 456D is an 8-32 threaded jack. Both types must be soldered to wire and pressed into 457D insulator. MATERIAL = nickel plated brass 456C IS SOLD = as 1 Each of banana jack. 456D IS SOLD = as 1 Each of threaded jack. 2 MM BANANA & INSULATOR 2570 457B insulator is for a recessed standard banana plug 491 and 457D insulator is used with 456C banana jack and 456D threaded jack. MATERIAL = ABS V0/94 flame retardant plastic. SOLD = as 1 Each. Available in red, black, green, yellow, blue and white. 908-1 SOCKET & 908-2.460 1.030 1.150" INCLUDES INSULATOR JACK & CAN BE THREADED TOGETHER. 1.10 0.475.787" This 2 mm banana plug (2570) must be soldered to wire and pressed into insulator. MATERIAL = nickel plated brass, nickel silver contacts. Insulator Molded Nylon. 457C INSULATOR FOR 450, 491,& 284-3 S The 908-1 jack is threaded 8-32. The 908-2 4 MM plug is threaded 8-32. MATERIAL = Nickle plated brass body with nickle silver contacts and molded Polyproplene. SOLD = as 1 each of 1 color. Select 908-1 Jack or 908-2 Plug. Colors Red Or Black. 660-1 LUG ADAPTER FITS 4 MM.435".110" TO.300".250" O.D. 1" 1.750" This insulator accepts part numbers 450, 491 & 284-3 and when pressed together becomes a miniature banana plug, a standard banana plug or a standard pin plug. MATERIAL = ABS V0/94 flame retardant plastic. SOLD = as 1 Each. Available in red, black, green, yellow, blue and white. This lug adapter fits any standard or recessed banana plug. The lug fits any size terminal from.100" to.300". Material = nickel plated brass body with nickel plated copper lug. Sold = as 1 lug. 826 RETRACTABLE 4 MM SAFETY STACKABLE 4 MM DO-IT YOURSELF, JUST SOLDER AND SNAP TOGETHER. 2594 2522 This plug fits any meter that requires a banana plug, makes no difference if it takes recessed or standard. The sleeve is spring loaded and covers the contacts when the plug is removed from the meter. Total length, 2.335" MATERIAL : molded nylon with nickel,plated brass body and gold plated contacts. SOLD : as 1 Plug. Select Color, Red or Black. 2514 SERIES HI-VOLTAGE PROBE HANDLES WITH TIPS This 3 piece recessed safety stackable plug is a solder type and then snaps together.. Plug 2522 is covered, 2594 is not covered. Material = Nickel plated brass body with nickel silver contacts. Plastic housing is Molded nylon. Sold = as 1 Plug. Colors available are Red, Black, Yellow, Blue & Green. 2571 2 MM SOCKET THREADED 1/4-28 4.875".312" O.D. I.D..305 WALL THICKNESS.097.500" MATERIAL: POLYPRO..875" TIP A TIP B.710" 106HH 106KK 2514 Uses tip B. Nickel Plated Brass not threaded. 2514-1 Uses tip A. Stainless Steel Needle Tip and threaded for accessories. SOLD = as 1 Probe Each. Choose Red Or Black.. Tips can be ordered separately, 106HH has a threaded needle tip, 106KK has a.080 brass tip. Sold as Each. PAGE 23 This 2 mm safety insulated jack (2571) is for surface mount and has a.187 tab for solder connection or slide connector. MATERIAL = Nylon. SOLD = As 1 Jack, Specify Color (Red Or Black)..

.375 Oldaker 805-3 DBL- TO BNC MALE 805-4 DBL- TO BNC FEMALE This adapter has double stackable banana plugs with cross holes on one end and BNC male on other. MATERIAL = ABS Black. Plugs nickel plated brass. SOLD = as 1 Each. 805-5 DBL-BINDING POST TO BNC MALE This adapter has double stackable banana plugs with cross holes on one end and a BNC female on the other. MATERIAL = ABS Black. Plugs nickel plated brass. SOLD = as 1 Each. 805-6 DBL-BINDING POST TO BNC FEMALE This adapter has a red and black binding post with cross holes for stacking on one end and BNC male on the other. MATERIAL = ABS. Nickel plated brass. SOLD = as 1 Each. This adapter has a red and black binding post with cross holes for stacking on one end and a BNC female on the other. MATERIAL = ABS. Nickel plated brass. SOLD = as 1 Each. 805-2 DBL- WITH SET SCREWS 985-2 BULKHEAD BNC FEMALE CONNECTOR..340 This plug adapter has double stackable banana plugs with set screws for attaching wire. Colors are Red or Black. MATERIAL = ABS with nickel plated brass. SOLD = as 1 Each, Select Red or Black. This is a BNC Female Bulkhead type connector and has gold center conductor and nylon plastic threaded base, solder connection. SOLD = as 1 Each. 796 IN-LINE FUSE HOLDER 984 BNC MALE 984 > RG/58 984-1 > RG/59 985 BNC FEMALE 985 > RG/58 985-1 > RG/59 APROX. 2 TO 2.5 This 2 piece crimp style fuse holder uses 1/4" dia. Fuses from 7/8" to 1 1/4" long, up to 30 Amp. MATERIAL : molded nylon, color yellow SOLD : as 1 Each 836 NEEDLE TIP & INSULATOR COMBO These BNC dual crimp connectors are for RG/58 and RG/59 cable. The male BNC part # is 984, The female BNC part # is 985. MATERIAL = Non tarnish finish, Gold plated center jack. SOLD = as 1 Each. 962 LEAD BENDER MODEL 962-1 FORMS: 1 WATT 2 WATT 1" BODY LENGTH 1.25" BODY LENGTH MODEL 962-1 This tip and insulator combo includes one.080" stainless steel needle tip, polished point, threaded 8-32 and one 5" ABS molded insulator. Colors are Red or Black.. MATERIAL: molded ABS with nickel plated brass tip and stainless steel needle tip. Note: Tip threads into insulator. SOLD: as 1 Each, Tip and Insulator, please specify color, Red or Black. PAGE 24 MODEL 962-2 FORMS: DIODES 1/4 WATT 1/2 WATT MODEL 962-2 Radiused edges, eliminates scarring of leads. Graduated in.050" increments. Made of high impact red cycolac plastic. Size - 5 1/2" long.

OLDAKER SCOPE PROBES OTHER ACCESSORIES AVAILABLE WIRE WRAP TIP 4264 12 GROUND LEAD 4263 ALLIGATOR TIP 4270 R.P.OPTION = Available with readout pin, the readout actuator option (permanently attached), is available on the 10X fixed probes only. This option provides necessary resistor circuit to change the range factor on model 465, 475, 485 & 7000 series Tektronix scopes. PART # 3501 3502 3503 3504 3504RP 3505 3505RP 3506 3510 3511 3512 3513 3515 ATTEN. SWT 1X-10X SWT 1X-10X FIXED 1X FIXED 10X FIXED 10X FIXED 10X FIXED 10X FIXED 10X FIXED 100X FIXED 1X FIXED 1X FIXED 10X SWT 1X-10X B.W.MHz @ 30B 5/100 10/200 20 100 100 200 200 100 100 12 15 300 6/250 RISE TIME N.S. 70/3.5 35/1.4 17.5 3.5 3.5 1.4 1.4 11.0 3.5 60 23.3 1.16 58/1.4 PICO HOOK 4257 HEAVY DUTY - RUGGED - RELIABLE 3 POSITION SWITCH (1X, REF, 10X) COMPENSATION FOR ALL SCOPES FLEXIBLE 5 FOOT CABLE. SCOPE PROBE SELECTION CHART LOADING pf MO 90/16 1/10 60/15 1/10 45 1 15 10 15 10 13 10 13 10 10 60 4 10 N/A N/A N/A N/A N/A N/A N/A N/A PINCER HOOK 4256 LENGTH 5 FOOT 5 FOOT 5 FOOT 5 FOOT 5 FOOT 5 FOOT 5 FOOT 6 FOOT 5 FOOT 6 FOOT 6 FOOT 5 FOOT 6 FOOT MICRO HOOK 4258 CHANNEL MARKERS 4271 DC MAX 500 V 500 V 500 V 500 V 500 V 500 V 500 V 600 V 500 V 600 V 500 V 500 V 500 V PROBE HOLDER 4272 WIRE WRAP GROUND 4265 971 THE THIRD HAND MULTI ADJUSTABLE HANDS FREE SOLDERING THE THIRD HAND WILL FIT ANY SOLDERING IRON UP TO 7/8 This handy fixture gives the user a 3rd hand, it holds the iron in place while you assemble and solder. 2 way adjustment with replacement parts available. Fits any soldering iron up to 7/8 Dia. Made of aluminum and measures 6" x 6' x 12. SOLD as 1 Unit Without soldering iron. Includes Instructions. PAGE 25

TEST LEAD WIRE, 14, 18, 20 & 24 GA. RUBBER, PVC, SILICONE PART # 183 183A 183B 183C 184 184B 990 GA. - STRAND 18 (65 X 36) 18 (65 X 36) 18 (440 X 002) 14 (7x24 X 36) 20 (41 X 36) 20 (10 X 30) 24 (45 X 40) INSUL. THICK.045".045".045".033.040".032".019" O. D..145".145".145".145.120".102".066" INSUL. TYPE RUBBER PVC SILICONE PVC RUBBER PVC RUBBER VOLTAGE 5K - 20K 5K - 20K 5K - 20K 5K - 20K 1.5K - 6K 600 V 1K - 10K COLORS RED, BLK, BLU, GRN, YEL, WHT RED & BLACK RED & BLACK RED & BLACK RED & BLACK RED, BLK, BLU, GRN, YEL, WHT RED, BLK, BLU, GRN, YEL, WHT PUT-UP IN FEET 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 COAXIAL CABLE, RG 58, RG 59, RG 174 PART # 288-1 588-4 288 RG/U 58C 59 174 NOM O.D..195".242" SHIELD T.COPPER COPPER INSUL. TYPE P.ETHEL. P.ETHEL..105" T.COPPER P.ETHEL. VOLTS 1900 2300 1500 CAP pf / FT 29.5 21.0 30.0 IMP. OHMS 50 75 50 COLORS BLACK BLACK BLACK PUT-UP IN FEET 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 10-25-50-100 250-500-1000 COIL CORDS - 1 & 2 CONDUCTOR. 780 = 2 CONDUCTOR 24 GA. PVC INSULATION.220" O.D. 1 FOOT RETRACTED, 4 FOOT EXTENDED 5/8" DIA. COIL, 12" STRAIGHT ENDS. SOLD AS 1 COLOR, BLACK. 106FF NICKLE PLATED BRASS TIP 742 (COLOR) = 1 CONDUCTOR 20 GA. NEOPRENE INSULATION.165" O.D. 1 FOOT RETRACTED, 5 FOOT EXTENDED 3/4" DIA. COIL, 12" STRAIGHT ENDS. SOLD AS 1 COLOR RED OR BLACK. 106GG NICKLE PLATED NEEDLE TIP 106FF TIP HAS A.080 X.625 BRASS TIP. BODY SIZE IS KNURLED BRASS TO.198 DIA. AND IS SOLDER TYPE CONNECTION. PART IS NICKLE PLATED AND SOLD AS 1 EACH. 106GG TIP HAS A.080 X.625 STAINLESS STEEL NEEDLE TIP WITH POLISHED POINT PRESSED INTO A BRASS BODY. TIP BODY SIZE IS KNURLED TO.198 DIA. AND IS SOLDER TYPE CONNECTION. PART IS NICKLE PLATED AND SOLD AS 1 EACH. O N -LINE A Tw w ṫestl e a dṣn e ṭc L ICK O NC R OS S RE F ERE N CE. F OR A CO M PL E TE U PT O D ATE C RO S SR E FER E NC E CH E CK PAGE 26