INVESTMENT RECOVERY SERVICES

INVESTMENT RECOVERY SERVICES DAY TWO - INDUSTRIAL MACHINE TOOLS AND SUPPLIER AUCTION 3609 Clinton Dr 77020 Texas 76111 United States Ended Jul 15, 2020 8:12pm CT (Jul 16, 2020 2:12am BST) Lot Description 2001 13 Drawer Storage Cabinet with contents 2002 11 Drawer Storage Cabinet with contents 2003 10 Drawer Storage Cabinet with contents 2004 9 Drawer Vidmar Storage Cabinet, empty 2005 9 Drawer Lift Top Storage Cabinet with contents 2006 9 Drawer Lista Storage Cabinet, Axelson tooling 2007 9 Drawer Storage Cabinet with contents 2008 9 Drawer Storage Cabinet with contents 2009 9 Drawer Storage Cabinet with contents 2010 9 Drawer Storage Cabinet with contents 2011 9 Drawer Storage Cabinet with contents 2012 8 Drawer Storage Cabinet with contents 2013 8 Drawer Storage Cabinet with contents 2014 Proto 8 Drawer Cabinet with contents 2015 7 Drawer Storage Cabinet with contents 2016 7 Drawer Storage Cabinet with contents (Lucas) 2017 7 Drawer Storage Cabinet with contents 2018 7 Drawer Storage Cabinet with contents

2019 7 Drawer Storage Cabinet with contents 2020 7 Drawer Storage Cabinet, empty 2021 7 Drawer Storage Cabinet with contents 2022 7 Drawer Storage Cabinet, Dean Smith & Grace tooling 2023 6 Drawer Vidmar Storage Cabinet, Summit tooling 2024 6 Drawer Storage Cabinet with contents 2025 6 Drawer Storage Cabinet with content (Cincinnati) 2026 6 Drawer Storage Cabinet with contents (Cincinnati) 2027 6 Drawer Storage Cabinet, empty 2028 6 Drawer Storage Cabinet, empty 2029 6 Drawer Storage Cabinet, empty 2030 6 Drawer Storage Cabinet with contents (Lodge & Shipley) 2031 6 Drawer Storage Cabinet with contents: misc. collets, some new in box 2032 6 Drawer Storage Cabinet with contents 2033 6 Drawer Storage Cabinet with contents 2034 5 Drawer Storage Cabinet with contents 2035 5 Drawer Storage Cabinet with contents (Cincinnati) 2036 5 Drawer Storage Cabinet with contents (Cincinnati) 2037 7 Drawer Storage Cabinet with contents (Lucas) 2038 5 Drawer Storage Cabinet with contents (Cincinnati) 2039 5 Drawer Storage Cabinet with contents (Cincinnati) 2040 5 Drawer Storage Cabinet, empty

2041 5 Drawer Storage Cabinet, empty 2042 5 Drawer Storage Cabinet, empty 2043 5 Drawer Storage Cabinet with contents 2044 5 Drawer Storage Cabinet with contents (Cincinnati Bickford Radial Drill) 2045 5 Drawer Storage Cabinet with contents (Cincinnati Bickford Radial Drill) 2046 5 Drawer Storage Cabinet, misc. tools 2047 5 Drawer Storage Cabinet with contents 2048 5 Drawer Storage Cabinet with contents 2049 5 Drawer Storage Cabinet with contents 2050 5 Drawer Storage Cabinet with contents 2051 5 Drawer Storage Cabinet with contents 2052 5 Drawer Storage Cabinet with contents 2053 4 Drawer Storage Cabinet, empty 2054 4 Drawer Storage Cabinet with contents (Lodge & Shipley) 2055 4 Drawer Storage Cabinet with contents, misc. tools 2056 3 Drawer Storage Cabinet with contents (Lodge & Shipley) 2057 2 Door Storage Cabinet with contents; Lucas Boring bars and misc. tooling 2058 2 Door Storage Cabinet, Dean Smith & Grace tooling 2059 2 Door Storage Cabinet, Axelson tooling 2060 2 Door Storage Cabinet, Dean Smith & Grace tooling 2061 2 Door Storage Cabinet, empty 2062 2 Door Storage Cabinet, empty

2063 2 Door Storage Cabinet, empty 2064 2 Door Storage Cabinet, empty 2065 Cabinet for 45 Deg. Tool Holders 2066 Sunar Cabinet: 2 doors, 5 shelves, with contents 2067 2 HP PEERLESS PEDESTAL GRINDER 2068 Baldor Model 1217W Double End Pedestal Grinder, 12" max. grinding wheel dia., 2" max. grinding wheel width, 1800 rpm grinding wheel speed, 2 hp, 115/230V / 1P / 60Hz / 20/10A, 4 poles, Spec. No.: G12-119B-0002, wt: 253 lbs., 1.25" shaft dia., S/N X0606157049 2069 BALDOR PEDESTAL GRINDER, 1.5 HP, FRAME 528M 2070 BALDOR PEDESTAL GRINDER, 2 HP, FRAME 0628M 2071 Dayton 6" Double End Pedestal Grinder, 6" max. grinding wheel dia., 3/4" max. grinding wheel width, 1/2" arbor hole, 3450 rpm grinding wheel speed, 1/4 hp, 120/240V / 1P / 60Hz / 3.0/1.5A, 16-1/2" wheels center to center, S/N 4806 2072 Double End Pedestal Grinder 2073 STANDARD ELECTRICAL TOOL CO., TWIN WHEEL GRINDER, 10" WHEEL SIZE 2073A Ingersoll Rand Handheld Grinder 2074 Large Pallet: Norton Grinding Stones, all are in boxes, 4/3 x 1-1/2" x 1-1/4", 32A46-M8VBE, ME 19237 2075 Lot of Large Mount Up Troli Grinding Wheels, 30" x 3" x 12" 2076 Lot of Grinding Wheel Segments 2077 Cincinnati Tool and Cutter Grinder, rebuilt 1997, 10" swing over table, 6" x 36" table, 16" table long. travel, 10" cross travel, 180 deg. table swivel, 10.5" grinding wheel spindle vert. travel, 13.5" max. spindle to table, ±15 deg. spindle tilt from center, 360 deg. grinding wheel spindle swivel,...[more] 2077A Lot of Assorted Grinding Wheels, Wheel Balancer, and Accessories for Tool and Cutter Grinder (2 Racks) 2078 Oliver Drill Bit Grinder, 1/2" - 3" dia. cap. (2 and 3 flute R.H. drills), 1/2" - 2-3/4" dia. cap. (3 flute drill head in split bushings), 28" max. drill bit length, 80-160 deg. grind angle point, 9" x 2" x 5" grinding wheel, 1800 rpm motor speed, 2 hp (230V/3P/60Hz/6.2A) grinding wheel motor, whe...[more] 2079 Cincinnati Model DE Universal Cylindrical Grinder, new 1970, 18 swing, 48 centers, 1745 rpm grinding wheel speed, 7.5 hp grinding wheel motor, 14 x 1.5 grinding wheel, lower swivel 90 deg., upper swivel 30 deg., 25 200 rpm work head speeds, 2.2 hp work head motor, work head swivel 90 deg., 11...[more]

2080 24" x 36" Norton Plain Cylindrical Grinder, new 1952, 24 swing, 36 centers, 30 x 2 x 12 grinding wheel, 15 hp grinding wheel motor, 12.5 3-jaw work head chuck, S/N 24383 2082 17" x 72" Heavy Duty Cincinnati Plain Cylindrical Grinder, new 1995, 17" swing, 72" centers, 36" x 3" grinding wheel, 20 hp grinding wheel motor, 120 ipm hyd. table travel, 5 hp workhead motor, 15" 4-jaw chuck, tailstock, work rests, coolant system, hyd. system, extra heavy duty table and spindle d...[more] 2083 17" x 63" Studer Model S40-2 Cylindrical Grinder, 17-1/2" max. grinding dia., 63" centers, 5-1/2" x 64" table work surface, 20-900 rpm workhead speed, 1150 rpm grinding wheel speed, 360 deg. work headstock swivel, #5 Morse work headstock taper, #3 Morse tailstock taper, 20" x 3.1/4" x 8" grinding...[more] 2086 Cincinnati Centerless Grinder, 0.5" - 6" dia., cap., 24" x 10" x 12" bore grinding wheel, 25 hp grinding wheel motor, 14" x 10" x 5" bore regulating wheel, 10-320 rpm regulating wheel speed, 1.5 hp regulating wheel motor, hydraulic wheel dressers (both heads), reversing switch on regulating wheel...[more] 2087 10" x 20" Chevalier Surface Grinder, 10 x 20 table, 9-7/8 x 19-3/4 std. mag. chuck, 21 table surface to spindle, 22-7/8 table long. travel, 16-82 fpm table speed, 10 table cross travel, 12 fpm table cross travel rapid, 0.02 1 auto transverse inc., 0.0025-0.25 ipr cross travel handwheel...[more] 2088 12" x 30" Summit Reciprocating Table Surface Grinder with Power Downfeed, 10" x 29.5" EM table, Ø12" x 2" grinding wheel, oad (approx.): 55" x 84" x 94" high, S/N 3312 2089 16" x 36" Norton Model S-1 Reciprocating Table Surface Grinder, 16.5" x 37" table (electro-magnetic chuck), 12" grinding wheel, 7.5 hp spindle motor, 40" table long. travel, 13.25" auto cross travel, 0-125 fpm hyd. table feed, 0-0.5 ipm aut cross feed, 18" vert. wheel head travel, auto overhead...[more] 2090 8" x 24" Thompson Model 2F Reciprocating Table Surface Grinder, 8" x 24" electromagnetic chuck table, 12" x 1" x 3" grinding wheel, 54 rpm grinding wheel speed, 3 hp spindle motor, 12.5" height under new wheel, 9" wheel head cross travel, 29" table travel, 5-75 fpm (var.) table speed, 1.5 hp hyd....[more] 2091 Harig Model 618W Reciprocating Table Surface Grinder, 6" x 18" electromagnetic chuck table, 20" long. travel, 6-3/4" cross travel, 11-3/4" height under 7" wheel, 7" x 1/2" x 1-1/4" grinding wheel, 0.0001" elev. handwheel graduations, 0.001" cross feed handwheel graduations, 3450 rpm spindle speeds,...[more] 2092 Reid Model 618V Reciprocating Table Surface Grinder, 8" x 51" table, 6" x 18" (EM chuck) cap., 14-3/4" max. grinding height, 12-35 fpm (var.) table speed, 1.25 hp spindle motor, 15-1/4" spindle center to table, 7" grinding wheel dia., long. and cross feeds, oad (approx.): 48" x 52" x 73" high, wt:...[more] 2093 Van Norman Model 444 Rotary Surface Grinder, 12" chuck, 8" height cap., 8" under wheel, S/N LMEU1066MC20 2094 Yoshikawa Model YGS-16 Rotary Surface Grinder, 16" dia. mag. chuck, 7.87" spindle trvl, 10" dia. grinding wheel, 10.5" under wheel, 1500 rpm spindle speed, 5 hp spindle motor, 12-25 rpm table speeds, 1 hp table motor, wt (approx.): 3500 lbs., S/N 7741 Note: Specifications subject to verification 2095 Dumore #5 Portable Electric Grinder, in metal travel case 2096 DAYTON PORTABLE DUST COLLECTOR 2097 TORIT Dust Collector

2098 TORIT Dust Collector Filters, Assorted Models & Sizes 2099 TORIT Dust Collector Filters, Assorted Models & Sizes 2100 TORIT Dust Collector Filters, Assorted Models & Sizes 2101 2000 Gallon Monlan (PRAB) Model DF1500 Drum Type Coolant System with Paper Filtration System, 2000 gal. cap., 10 hp (Brinkman) pump, 400 gpm flow rate, 39" drum dia., 59" paper width, 8" inlet dia., OAD (approx.): 124" x 112" x 93" high, S/N NA 2102 Metpro Duall High Volume Vertical Packed Tower Design Wet Air Scrubber with Model NH-44 Blower Fan, new 2008, vertical packed tower wet air scrubber type, Metpro Duall model NH-44 blower fan (6500 cfm, sp. 7.0, 13.45 hp, 2122 rpm, S/N 4910, Yr. 2008), Note: no other specifications for this system at...[more] 2103 20" x 96" Magnetic Table (Chuck) for Surface Grinder, electromagnetic chuck, 20" x 96" x 5" thick table, S/N NA 2104 Brown & Sharpe Magnetic Chuck 2105 Magnetic Chuck 36-3/4" L x 11" W, on rolling base, D290, 110V, 220 V; by LW Chuck Co-Toledo 2106 SPEEDWAY AIR COMPRESSOR, TANK MOUNTED, PORTABLE, SINGLE PHASE 2107 SPEEDAIRE AIR COMPRESSOR, TANK MOUNTED, PORTABLE, 2 HP, SINGLE PHASE 2108 Gardner-Denver Electra-Saver II 20 HP Rotary Screw Air Compressor, new 2008, 20 hp motor, 125 psi oper. pressure, 85 cfm output, oad (approx.): 65" x 42" x 37" high, S/N 9294327 2109 SULLIVAN-PALATEK MODEL 150UD AIR COMPRESSOR WITH AIR DRYER, 150 hp, 125 psi max, 705 ACFM cap., 208V/3P/60Hz, 407.1(19.1) amps, 150-(1)5.0 hp, S/N 1301090006, with Great Lakes Model GRF-800AN4-236 Air Dryer (150 psi, S/N 41772 2110 Receiver Tank for Air Compressor, Abbott-England, Code EN286-1, S/N A47432 2112 Hankison Air Dryer Model HIT 25, S/N 1000002749726 2113 Kearney & Trecker Milwaukee Model 205 S-12 Horizontal Universal Milling Machine, U.S. Government Surplus, new 1977, 12" x 56" table, 3 T-slots, 28" table long. trvl, 10" table cross trvl, 18" knee vert. trvl, 24 spindle speeds, 25-2000 rpm, 5 hp, No. 50 spindle taper, 16 long. and cross feeds...[more] 2115 Cincinnati Milacron Model 315-16 Plain Dial Type Horizontal Milling Machine, 16" x 72" table, 24 spindle speeds, 16-1600 rpm, 15 hp, #50 NS spindle taper, 34" table long. travel, 12" cross travel, 20" knee vert. travel, 0" - 20" spindle to table, 32 table long. feeds, 3/8-90 ipm, 32 cross feeds,...[more] 2116 Kearney & Trecker Model 425TF Plain Horizontal Milling Machine, new 1957, 88" x 17" table, 42" table long. travel, 14 table cross travel, 18 table vert. travel, 24 spindle speeds, 13 to 1300 rpm, 25 hp, No. 50 taper, 32 feeds, 3/8 to 90 ipm, 150 ipm rapid, twin elevating screws, double overar...[more] 2118 Heckert Model FU450 X 1800 APUG Universal Milling Machine, new 1980, 17.7" x 70.8" table, 3300 lbs. load cap., 45 deg. (L-R) table swivel, 52" table long. travel, 13.5" table cross travel, 24-3/4" knee vert. travel, 18 spindle speeds, 45-2240 rpm, 20 hp, ISO 50 taper, 5/8" - 25-3/8" spindle center...[more]

2119 Cincinnati Model 550-20 Vercipower Vertical Milling Machine, 20" x 94.5" table, 3 T-slots (13/16" on 4.25" ctrs), 24 spindle speeds, 14-1400 rpm, 50 hp, No. 50 taper, 5-1/6" and 8-23/32" nose dia., 50" table long. travel, 18" table cross travel, 24" headstock vert. travel, 32 long. feeds, 3/8-9...[more] 2120 Cincinnati Vercipower Vertical Milling Machine, 18" x 72" table, 24 spindle speeds, 16-1600 rpm, 20 hp, No. 50 spindle taper, 5-1/6" and 8-23/32" nose dia., 34" table long. travel, 12" table cross travel, 22" headstock vert. travel, 32 long. feeds, 3/8-90 ipm, 32 cross feeds, 3/8-90 ipm, 3/16...[more] 2121 8" Yuasa Dividing Head, Stock 550-007 2122 Cushman Dividing Head with 8-1/4" Chuck, 2-1/2 thru hole, S/N 1010408000D; with tailstock 2123 Dividing Heads 8" dia, OAL 19" 2124 12" CARROLL MANUAL DIVIDING HEAD WITH " CHUCK 2125 BURR King Vibra King 45 Deburrer, 4.5 cu. ft. cap., 1.5 hp motor, wet/dry oper., replaceable drain, S/N NA 2126 2-1/2" DeVlieg Model 2B-36 Jig Mill, 2-1/2" spindle, #40 taper, 24" x 36" table, 36" table long. travel, 12" table retraction, 24" vert. spindle travel, 12" horiz. spindle travel, 16 spindle speeds, 42-2000 rpm, 16 bar feeds, 0.0016-0.018 ipr, 16 milling feeds, 0.4-32 ipm, 50-150 ipm rapid t...[more] 2127 2-1/2" DeVlieg Model 2B-36 Jig Mill, new 1969, 2-1/2" spindle, #40 taper, 24" x 36" table, 36" table long. travel, 12" table retraction, 24" vert. spindle travel, 12" horiz. spindle travel, 16 spindle speeds, 42-2000 rpm, 16 bar feeds, 0.0016-0.018 ipr, 16 milling feeds, 0.4-32 ipm, 50-150...[more] 2128 Bridgeport EZ TRAK Series I CNC Vertical Milling Machine, 9" x 48" table, 36" table long. travel, 12" cross travel, 16" knee vert. travel, 5" spindle quill travel, 60-4200 rpm spindle speeds, 2 hp, R-8 taper, 1.875" spindle dia., 3.375" quill dia., 0.0015 / 0.003 / 0.006 ipr spindle feeds, ± 45 de...[more] 2129 Bridgeport EZ Trak Series I CNC Vertical Milling Machine, 9" x 48" table, 36" table long. travel, 12" table cross travel, 16" knee vert. travel, 5" spindle quill travel, 60-4200 rpm, 2 hp, R-8 spindle taper, 1.875" spindle dia., 3.375" quill dia., 0.0015 / 0.003 / 0.006 ipr spindle feed rates, ±...[more] 2130 Bridgeport "J" Head, S/N J-98433 2131 Bridgeport Mill Head 2132 Bridgeport Shaping Attachment, S/N E-1263T 2133 Bridgeport Shaping Attachment, S/N E6634 2136 Bridgeport 12" Rotary Table, S/N 12261 2137 Bridgeport 15" Rotary Table, S/N 10761 2138 12" T-Slotted Rotary Table, Index Machine Tools

2139 12" Cushman Index Table, 3 Jaws, 4" Thru Hole S/N 12-2369 2140 Rusnok Milling Head 2141 Kearney & Trecker Double Angle Universal Head with 50 Taper 2142 Lot of (2): Ridgid Threading Heads 2143 Lot of 3: Mill Tailstocks 2144 Acu-Rite Digital Read-Out 200S/300S; New in Box 2145 48" Giddings & Lewis Model VTC48 CNC Vertical Turning Center, 48" table (4-jaw chuck), 60" swing, 12" 72 under rail, 64" under tool holder, 60" rail vert. travel, 60" rail cross travel, 2 table speed ranges, 4-320 rpm, 60 hp, 50" ram travel, No. 60 ram taper, 8" x 8" ram, 0-100 ipm feeds...[more] 2146 Cold Shot Chiller, Model ACWC-120EM, S/N M103111-3, 460V/3P 2147 Kanto Seiki Model MPSB-07-N Automatic Oil Temperature Regulation Unit (Oil Chiller), Model designations (MPSB-07-N): M: oilmatic, P: high precision, S: with tank, 07: chiller capacity (7.5/0.75 kw), N: R-407C refrigerant (950g) Applications: machining centers, CNC lathes, EDM machines, CNC grinders...[more] 2148 Kanto Seiki Model MPSB-07-N Automatic Oil Temperature Regulation Unit (Oil Chiller), Model designations (MPSB-07-N): M: oilmatic, P: high precision, S: with tank, 07: chiller capacity (7.5/0.75 kw), N: R-407C refrigerant (950g) Applications: machining centers, CNC lathes, EDM machines, CNC grinders...[more] 2149 Kanto Seiki Model MPSB-07-N Automatic Oil Temperature Regulation Unit (Oil Chiller), Model designations (MPSB-07-N): M: oilmatic, P: high precision, S: with tank, 07: chiller capacity (7.5/0.75 kw), N: R-407C refrigerant (950g) Applications: machining centers, CNC lathes, EDM machines, CNC grinders...[more] 2150 Turmoil Model OC-150 IL-ATC In Line Oil Chiller, 18,000 btu/hr cooling cap., 4.5 gpm min. flow, 1-1/2 hp motor, 460V/3P/60Hz, oad (approx.): 31" x 30" x 38" high, S/N 3335-96 2151 5000 Lb. IRD Model B50-5V Balancing Machine with End Support, 5000 lbs. cap., 5 hp motor, 80" bed length, 94" max. rotor dia., 13" max. journal dia., belt drive, test bars, Note: needs control unit, oad (approx.): 111" x 58" x 60" high, S/N G240633 2152 Knuth Model SK2 Sand Blast Cabinet, 37" x 23.5" x 13" (front / 22" (rear) int. dim., 22.5" x 10.5" viewing window, top/side loading, dual side doors, operator gloves, blast gun, dust catcher, work lght, foot pedal, oad (approx.): 45" x 42" x 72" high, S/N NA 2153 Cyclone Model 3624 Top Loading Blast Cabinet, 35-1/2" x 23-1/2" int. dim., 13-1/4" height at front, 22-1/4" height at back, top loading locking door (spring loaded), side loading/access door (locking), viewing window, interior light, air vents, suction hose, Cyclone DC1500 dust collection system, du...[more] 2154 A-BEC Model PDH-4848 Blast Cabinet with A-Bec Model ADC-1210 Dust Collection Unit, new 2009, 48" x 48" x 46" high int. dim., 36" max. ht. over turn table, 30" dia. turn table with roller infeed, 7" x 21" viewing window, pressure pot, dual full opening side loading doors, 1000 lb. capacity roller inf...[more]

2155 36" Rolap Model 36 Lapping Machine, new 2006, 3 conditioning rings, 14-1/2 inside dia., 36 lapping plate dia., 30 rpm, 5 hp motor, double V-belt transmission, Rolap recirculation system blender pump, 0 60 min. timer, oad (approx.): 56 x 76 x 52 high, wt (approx.): 2000 lbs., S/N ROL 20050023...[more] 2156 28" Rolap Model C-100-30L ROL 28 Lapping Machine, new 2008, 3 conditioning rings, 11-3/8 inside dia., 28 lapping plate dia., 3 hp high performance motor, Rolap recirculation system blender pump, 0 60 min. timer, oad (approx.): 60" x 50" x 56" high, S/N ROL 2820080071 2157 New, Vanguard Model V610-3 Lapping Machine, new 2019 (never used), 9.4" max. working dia., 1/16" min. workpiece thickness, 25" work table plate dia., 60 rpm table plate speed, 2 hp motor, 0.00002" parallelism accuracy, ±0.00039" thickness tolerance, oad (approx.): 37.4" x 33.5" x 90.5" high, wt (app...[more] 2158 New, Vanguard Model V610-3 Lapping Machine, new 2019 (never used), 9.4" max. working dia., 1/16" min. workpiece thickness, 25" work table plate dia., 60 rpm table plate speed, 2 hp motor, 0.00002" parallelism accuracy, ±0.00039" thickness tolerance, oad (approx.): 37.4" x 33.5" x 90.5" high, wt (app...[more] 2159 Engis Hyprez Model 24LM230VP Lapping Machine, 24" lapping plate dia., 0-100 rpm (var.) plate rotation speed, 11.25" O.D. serrated conditioning ring, 9.75" I.D. serrated conditioning ring, 3 ring stations, 0-500 lbs. pneumatic down force, 3 hp motor, 60 psi air req., Engis controls, spare parts a...[more] 2160 28" x 40" VDF Boehringer Model V5 Engine Lathe, 28" swing over bed, 39.3" centers, 18 spindle speeds, 11.5-560 rpm, 10 hp, 4.75" spindle bore, Acu-Rite 2-axis DRO, 24" 4-jaw chuck, tailstock, 4-way tool post, oad (approx.): 169" x 76" x 85" high, S/N 13910 2161 28" x 96" Monarch Model 62 Engine Lathe, 18 swing over cross slide, 15 4 jaw chuck, 14-1750 rpm, 0.0011-0.0683 per revolution, 120-2 TPI, 20 HP, thread dial, steady rest, oad (approx.): 224" x 67" x 60" high, S/N 43933-AT 2162 27" x 72" Axelson Model 20 Engine Lathe, 27.75 swing, 20 over cross slide, 72 centers, 9.5 981 rpm, 20 hp, 1.5 spindle bore, 54 feeds, 0.003 0.185 ipr, 54 threads, 1.5 92 tpi, tailstock, taper attach., chip pan bed, oad (approx.): 176" x 60" x 61" high, S/N 3112 2163 27"/17" x 96" American Pacemaker Style E Engine Lathe, new 1966, 27" swing, 17" over cross slide, 96" centers, 18 spindle speeds, 13-800 rpm, 2.5" spindle bore, 6" top slide cross feed travel, 60 carriage long. feeds, 0.0033-0.2000 ipr, 60 threads, 1-60 tpi, 18" 4-jaw chuck, 7" I.D. steady re...[more] 2164 26" x 68" LeBlond "The Machine" Engine Lathe, 26" swing, 18" over cross slide, 68" centers, 24 spindle speeds, 14-1080 rpm, 2-1/8" spindle bore, 0.0036-0.205 ipr feeds, 2-112 tpi threads, 18" 4-jaw chuck, taper attach., tailstock, coolant, rapids, oad (approx.): 160" x 60" x 71" high, S/N HSL...[more] 2165 26 x 40 Zhejiang Model CK6150A Flat Bed CNC Lathe with GSK 928TEa CNC Control, new 2014, 26 swing, 18 over cross slide, 40 centers, 13 1600 rpm, 10 hp, 3.5 spindle bore, D1-8 camlock spindle nose, GSK 928Tea CNC control, 4-pos. power turret, 12 3-jaw chuck, tailstock, metered lube, coolant,...[more] 2165A 24" x 80" Victor Model 2480T Engine Lathe, 23.6" swing over bed, 15" over cross slide, 32.25" in gap, 80" centers, 25-1200 rpm, 20 hp, 4.13" spindle bore, D1-11 nose, inch/metric threading, 20" 4-jaw chuck, taper attach., steady rest, Aloris tool post, 2-speed tailstock, thread dial, chuck guard,...[more] 2166 24" x 59" VDF - Heidenreich & Harbeck Model V630 X 1500 Engine Lathe, new 1973, 24.8" swing, 13.3" over cross slide, 59" centers, 9-1800 rpm spindle speeds, 20 hp, 3.97" spindle bore, 2-axis DRO, 6-jaw chuck, chuck guard, tailstock, steady rest, compound slide, Multifix steel holder (size C) w...[more] 2167 20" x 80" TOS Model SN 50 C Engine Lathe, 19.6" swing, 10.6" over cross slide, 80" centers, 13.4" bed width, 24 spindle speeds, 22-2000 rpm, 8 hp, 2-1/4" spindle bore, 12" cross travel, 0.0019-0.195 ipr long. feeds, 0.00095-0.0975 ipr cross feeds, inch/metric threading, 12" 4-jaw chuck, tailst...[more]

2168 18" x 78" American Style B Engine Lathe, new 1963, 18" swing, 11" over cross slide, 78" centers, 30-2000 rpm spindle speeds, 15 hp, 5 MT taper, 2-1/16" spindle bore, 66 inch feeds, 0.0015-0.105 ipr, 66 inch threads, 2-127 tpi, 66 metric feeds, 0.04-2.67 mm/rev, 66 metric threads, 0.2-14 mm...[more] 2169 17" x 43" Kingston Model HJ-1100 Engine Lathe, new 1997, 17" swing, 10-9/16" over cross slide, 24" in gap, 5-7/8" gap length, 43-1/2" centers, 12 spindle speeds, 35 2000 rpm, 7.5 hp, 2-1/4" spindle bore, No. 6 MT taper, D-1-6 nose, 16 long. feeds, 0.0012-0.034 ipr, 16 cross feeds, 0.008-0.023...[more] 2170 16" x 78" American Pacemaker Engine Lathe, 16" swing, 78" centers, 17-1000 rpm spindle speeds, 10 hp, 1.75" spindle bore, 15" bed width, cross slide, tailstock, Note: no chuck, S/N 70360-47 2171 16" x 60" Birmingham Model YCL-1660 Gap Bed Engine Lathe, new 2006, 16.1" swing, 8.8" over cross slide, 25.1" in gap, 9.5" gap length, 60" centers, 11.8" bed width, 12 spindle speeds, 25-2000 rpm7.5 hp, 2.28" spindle bore, D1-6 camlock spindle nose, inch/metric threading, 2.3" tailstock quill dia....[more] 2172 Kingston Complete Taper Attachment Assembly with Taper Clamp, for HR series lathes, UNUSED 2173 36" Pratt & Burnerd 4-Jaw Chuck, Catalog 1572-79201, S/N E62080 2174 36" Skinner Horton 4-Jaw Chuck, 1 pc jaw, 5" thru hole, S/N 1100336D08C 2175 36" 3 Jaw Chuck with serrated jaws, 7" thick 2176 28" Cushman 3-Jaw Extra Heavy Duty Forged Steel Chuck with 12.5" Thru-Hole, 28" dia., 3 jaws (2 piece), 12.5" thru-hole, A2-20 spindle mount, power wrench compatible, S/N 912428312 A-9-E 2177 25" 4-Jaw Bison Chuck, 2 pc jaws, 9-1/2" thru hole, Flat Back. 2178 24" CUSHMAN 4-JAW CHUCK, 5" THRU-HOLE, 2 PIECE JAWS, S/N 100042000 2179 24" Cushman 4-Jaw Heavy Duty Power Wrench Combination Chuck with 8-1/8" Hole, 24" dia., 4-jaws, combination scroll / independent type, A2-15 mount, 8-1/8" hole, A2-11 / A2-15 adapter, power wrench, S/N NA 2181 24" 4-Jaw Chuck, 5" Thru Hole, 5" deep, with OAD 7" to threaded base 2182 24-1/2" Adapter Plate with 9" thru-hole, A-15 to A-20 mount 2183 24 " Adapter Plate, 4" thru hole, L Mount 2184 24" Adapter Plate, 4" thru hole, L Mount 2185 22" SCHUNK MODEL ROTA TB 500-230 PNEUMATIC STEEL CHUCK, WITH ADAPTER PLATES 2186 21" 3 Jaw Cushman Chuck, 2 pc jaws,4" thru hole, Cam Lock, no top jaws 2187 21" 4 Jaw Cushman Chuck, 1 pc jaws, 4" thru hole, custom jaws.

2188 20" 3 Jaw Chuck, 2 pc jaws, 7-1/2" thru hole 2189 20" 4 Jaw Chuck, 1 pc jaws, 5" thru hole, with heavy duty adapter plate 2190 19" Adapter Plate, 3" thru hole, L Mount 2191 18" Cushman 3 Jaw Chuck, 1 pc jaws, 5" thru hole, flat back, S/N 11-124-18-A11C 2192 18" Cushman 3-Jaw Chuck, 2 pc jaws, 5" thru hole, Flat Back, S/N 10-124-18A110 2193 18" Cushman 3-Jaw Chuck, 2 pc. Jaw, 5" thru hole, S/N 10-124-18-A11C 2194 18" Cushman 3-Jaw Chuck, 2 pc. Jaw, 5" thru hole, S/N N/A 2195 18" 4-Jaw Cushman Chuck, 1 pc jaws, 4" thru hole, S/N 1000318D06D 2196 18" Cushman 4 Jaw Chuck, 1 pc jaws, 5-1/4" thru hole, flat back, S/N 120031A208A 2197 18" 4 Jaw Chuck, 4" thru hole, threaded spindle 2198 18" 4 Jaw Chuck, 4" thru hole, threaded spindle, 10-003-18-000E R-3 2199 18" 4-Jaw Chuck, 2 pc. jaws, 4" thru hole, threaded spindle 2200 18" 3 Jaw Chuck, 2 pc jaws, 5" thru hole 2201 16" 3 Jaw Bison Chuck, 2 pc jaws, 5" thru hole, w/adapter 8" diameter 2202 16" 3-Jaw Chuck, 2 pc jaws, 4" thru hole, has adapter 10" dia x 6", no top jaws 2203 15" Cushman 3 Jaw Chuck, 2 pc jaws, 3-1/4" thru hole, S/N 1010415A11A 2204 15" 3 Jaw Chuck, 2 pc jaws, 3-1/4" thru hole, threaded spindle 2205 15" 3 Jaw Chuck, Serrated Jaws, 4" thru hole 2206 15" 4 Jaw Cushman Chuck, 2 pc Jaws, Cam Lock, 10-004-15-D06C 2207 15" 4 Jaw Horton Skinner Chuck, 1 pc Jaw, 3" thru hole, L Mount 2208 15" Bergmans 4-Jaw Chuck, 1 pc. Jaws, 3-1/2" thru hole with 5" threaded spindle 2209 15" 4 Jaw Chuck, 1 pc jaws, 3" thru hole, Cam Lock

2210 15" Chuck, 3 Jaw Serrated, 5-1/2" thru hold 2211 15" Adapter Plate, 4" thru hole, threaded spindle 2212 15" Adapter Plate, 4-5" cone, 2-1/2" thick 2213 12" 2-Jaw Chuck with Adapter, flat back, 6 bolt back 2214 12" Cushman 3 Jaw Chuck, 2 pc jaws, 3" thru hole, threaded spindle, S/N 10-104-12L02A 2215 12" Cushman 3 Jaw Chuck, 2 pc jaws, 4-1/2" thru hole, S/N 1014412000B 2216 12-1/2" 3-JAW CHUCK, 4" THRU-HOLE, D-8 CAM LOCK, 2 PIECE JAWS 2217 12-3/4" 3-Jaw Chuck with 4" thru-hole, 1 piece jaws, camlock, D-9 mount 2218 12" 3 Jaw Chuck, 1 pc jaws, 4" thru hole, Flat Back 2219 12-1/2" 3 Jaw Chuck, 2 pc jaws, 4" thru hole, flat back 2220 12" 3 Jaw Cushman Chuck, 2 pc jaws, 3" thru hole 2221 12" 3 Jaw Cushman Chuck, 2 pc jaws, 3" thru hole, S/N 1010412D06A 2222 12" 3 Jaw Pratt-Burnard Chuck, 4" thru hole, Cam lock, Cat # 121900390 2223 12" 3-Jaw Chuck with 4" Thru-Hole, 2-piece jaws, adapter, camlock, S/N NA 2225 12" 4 Jaw Chuck, 2 pc jaws, 3" thru hole, with 14" spindle adapter 2226 12" Cushman 4 Jaw Chuck, 1 pc. Jaws, 3" thru hole, flat back, SN 12214CD6 2227 12-1/2" Bison 4 Jaw Chuck, 1 pc jaw, 3" thru hole, flat back 2228 12" BUCK 4-JAW CHUCK, 3-1/2" THRU-HOLE, A-8 MOUNT 2229 12" 4-JAW CHUCK, 3" THRU-HOLE, L-1 MOUNT 2230 12" BUCK 6-JAW CHUCK, SET TRU, 4" THRU-HOLE, A-8 MOUNT, 2 PIECE JAWS 2231 12" Adapter Plate, 2-1/2" thru hole, Cam Lock 2232 12" Adapter Plate, 5" thru hole, Cam Lock

2233 12" 4-Jaw Chuck with 3" Thru-Hole, 1-piece jaws, camlock, D-5 mount, S/N NA 2235 10-1/2" Chuck 3 Jaw, 2 pc jaws, 3-1/2" thru hole, flat back, with fixture 2236 10" Cushman 3 Jaw Chuck, 2 pc jaws, 2" thru hole, flat back, S/N 10-104-10-D06B 2237 10" Bison Chuck, 2 pc jaw, 3" thru hole, Cam Lock 2238 10" 3-Jaw Hydraulic Chuck, 2-1/4" threaded back, serrated jaws 2239 10" 3 Jaw Chuck, 2 pc jaws, 3" thru hole, threaded back 2240 10" 3 Jaw Cushman Chuck, 2 pc jaw, 2" thru hole 2241 10" 4 Jaw Bison Chuck, 2 pc jaws, 3" thru hole, flat back 2242 10" 4 Jaw Chuck, 1 pc jaws, 2-1/2" thru hole, flat back 2243 10" 4 Jaw Chuck, 2 pc jaws, 3" thru hole, Cam Lock. 2244 10" Adapter Plate, 1-1/2" thru hole, Cam Lock 2245 10" Adapter Plate, 2-1/2" thru hole, Cam Lock 2246 10" Adapter Plate, 2-1/2" thru hole, Cam Lock 2247 9-1/2" Buffalo 3 Jaw Chuck, 2 pc. Jaws, 3" thru hole, 4" back 2248 9" Bison 3 Jaw Chuck, 1 pc jaws, 2-1/2" thru hole, flat back, Has space for 6 jaws. 2249 8-1/2" Cushman 3 Jaw Chuck, 2 pc. Jaws, 2-1/2" thru hole, S/N 10-104-08-000E R-9Chuck 2250 8" Bison 4-Jaw Chuck, 1 pc jaws, 2" thru hole with adapter plate 2251 8" CAS 4-Jaw Chuck, 1 pc. Jaws, 2" thru hole, Cam Lock 2252 7" Adapter Plate, 2" thru hole, Cam Lock 2253 6" 3 Jaw Buck Chuck, 2 pc jaws, 1-1/2" thru hole, w/cam Lock adapter 2254 6" 3 Jaw Chuck, 2 pc jaws, 1-1/2" thru hole. 2255 6" 3-Jaw Chuck, 2 pc jaws, 1-1/2" thru hole, Cam Lock

2256 Lot: (3) 6" 3-jaw Chuck, 1 pc. Jaws, 1" Thru Hole, and (1) Steady Rest 2257 5" 3 Jaw Bison Chuck, 2 pc jaws, 1" thru hole, Flat Back 2258 5" 3-Jaw Pratt-Burnerd Chuck, 1 pc jaws, 1" thru hole, Flat Back, S/N 1210-01305 2259 Cincinnati Hydraulic Chuck (in crate) with tailstock 2260 NEW, 12-1/2" 4-Jaw Independent Chuck with 3-3/4" Thru-Hole, S/N NA 2261 NEW, 21" 4-JAW CUSHMAN CHUCK, A-15 MOUNT, 6-1/4" HOLE, 2 PIECE JAWS 2262 NEW, 21" CUSHMAN 4-JAW CHUCK, A-15 MOUNT, 6-1/4" HOLE, 2 PIECE JAWS 2263 NEW, ADAPTER PLATE, 20" DIAMETER, 11" THRU-HOLE, 3" THICK, 3/4" LIP 2264 NEW, ADAPTER PLATE, 20" DIAMETER, 11" THRU-HOLE, 3" THICK, 3/4" LIP 2265 NEW, ADAPTER PLATE, 20" DIAMETER, 11" THRU-HOLE, 3" THICK, 3/4" LIP 2266 SET OF FOUR FACE PLATE JAWS 2267 SET OF FOUR, FACE PLATE JAWS, 8-1/2" LONG: 6-1/4" ON CENTER, 2 BOLTS. 2268 Lot: Chuck Jaws 2269 Lot: Chuck Jaws 2270 Lot: Chuck Wrenches 2271 Lot: Heavy Duty Chuck Jaws 2271A Safety Chuck Cover 2272 REM (Recycling Equipment Manufacturing, Inc.) Model MS-10 Magnetic Separator Conveyor, 24" belt width, 120" chute length, 36" loading height, 80" discharge height, all steel unitized slider bed construction, PVC-150 conveyor belting with 1-1/2" vulcanized cleats and Flexco 125 megalloy lacing, 8" di...[more] 2273 Schmidt Model 175-5 Hydraulic Roll Marking Machine, 500-14,000 lbs. ram pressure, 1/2" ram stroke, 3/8" - 7" adj. die stroke, 10" die space height, 3-1/2" throat, 10" x 6" table, control station, dual hand control buttons, manual hand crank for table adj., 3 modes of operation (roll marking, press...[more] 2274 TRANSFER CAR, 25' LONG X 6' WIDE X 2' HIGH 2275 96" x 60" x 26" High Custom Steel Frame Transfer Cart on Casters, 96" length, 60" width, 26" height, 20,000 lbs. load cap., 10" swivel casters, S/N NA

2276 36' LONG X 84" WIDE X 16,000 LB. CAPACITY DOCK AND CONTAINER RAMP 2277 Nibbler Fabriks Model Faximil 6CCN 1000 Nibbler, 250-1400 spm (inf. var.), adj stroke length: 2, 4, 6, 8 mm, 1330 mm projection, 1.5 kw motor, foot switch for single stroke punching, punching tool cuts up to 6 mm, beading tool up to 4 mm, gills up to 3 mm, nibbling up to 6 mm, edging tools up to 3...[more] 2277A 70 Ton Geka-Hydracrop Model HYD-70 Ironworker, 70 tons cap., 5" x 5" x 1/2" angle cut-off at 90 deg., 18" x 5/8" flat, 1-3/4" round, 1-3/4" square, 1-1/8" x 3/4" punch, 3" punch stroke, 20" punch throat, 48 spm at 3/4" travel, Capacity with special blades: 6" x 6" x 1/2" angle cut-off at 90 deg., 5...[more] 2278 Contech Model UP2028 Shuttle Bed Die Cutting Press With Hydraulic Unit, 20" x 28" platen (die cutting area), 22" x 30" max. die board size, 7-50 tons range, 10" upper platen stroke (no heat platen), 7-1/2" max. press opening (with upper heat platen), 5-1/2" max. press opening (with upper and lower...[more] 2279 55 TON POWER TEAM H-FRAME HYDRAULIC PRESS MODEL PQ120 SERIES, 3 Ph 3 HP 230/460 2280 10 TON ENERPAC MODEL IPHO10S10-1 HYDRAULIC PRESS 2281 Enerpac Double Cylinder Hydraulic Press 2282 Anvil Press #30 2283 Manual Press 2284 200 Ton Rodgers Model 2A MV-GV-RC1-TL4 Wheel Press, 200 tons cap., 12" - 120" daylight (ram retracted), 10" yoke dia., 3.25" ram dia., 10" ram stroke, S/N D2A-1361 2285 4' x 16 Ga. Tennsmith Hand Operated Bending Roll, new 1985, 16 ga. (mild steel), 49" max. length, 3" dia. rolls, 1-1/2" min. forming radius, 3/8, 1/2", & 5/8 wire grooves, 4:1 gearing ratio, turned, grooved and polished rolls, wide clearance top roll latch, wire grooves & three full-length...[more] 2286 6' x 12 Ga. Dreis & Krump Model BPU-612-6 Box & Pan Brake, new 1972, 72" x 12 ga. (mild steel), 72" x 16 ga. (ss), 17 fingers: (3) 3" / (3) 4" / (7) 5" / (1) 6", oad (approx.): 117" x 53" x 60" high, wt (approx.): 2,670 lbs., S/N 310168 2287 Savage 30 HP Model WJS-20 Wet Type Abrasive Cut-Off Saw, new 1998, 18" blade dia., 1600 rpm spindle speed, 30 hp, 52" blade gantry travel, 36" x 24" table, 27" table travel, coolant tank, pump and piping, oper. panel with motor load meter, manual and auto modes, oper. manual and drawings, machine or...[more] 2288 Savage 30 HP Model WJS-20 Wet Type Abrasive Cut-Off Saw, new 1998, 18" blade dia., 1600 rpm spindle speed, 30 hp, 52" blade gantry travel, 36" x 24" table, 27" table travel, coolant tank, pump and piping, oper. panel with motor load meter, manual and auto modes, oper. manual and drawings, machine o...[more] 2289 8" x 14" Horizontal Mitering Bandsaw, new 2007, 8" x 14" cutting cap., 5-1/2" x 6" angular cutting cap., 86, 128, 175, 244 fpm blade speeds, 1" x 0.035" x 107" blade, 120V/60Hz/18A power, S/N 704322 2291 Roll-In Model EF1459 Vertical Bandsaw, new 2000, 14-1/2" under guides, 8-3/4" throat, 9" blade travel: into work piece, 3/4" x 10' x 0.035" blade (bi-metal), 70, 140, 270, 525 fpm blade speeds, 1 hp, 18-1/2" x 30" table, 30" table height, 1/4", 3/8", 1/2", 5/8" and 3/4" guide rollers for blades widt...[more]

2292 Ridgid 10" Dual Blade Table Top Saw 2293 Delta Unisaw Tilting Arbor Table Saw 2294 Holding Tank 2295 Yellow Bellied Sump Sucker Model 175 Air, 175 gal. cap., 80-100 psi air supply, 100-125 cfm intake rate, 5.3 cu. ft. sludge basket cap., 2" suction hose, 1.5" discharge hose, 2" drain holes, air venturi powered, 12" dia. leak-proof access door, tow package design, oad (approx.): 78" x 34" x 59...[more] 2297 5K/30k Stella Maris Hydraulic Power Unit for Pressure Testing, new 2010, Hydraulic power unit designed to pressure test subsea connectors, valves and other components; 5K circuit: for flow testing up to 5000 psi, Includes (4) 4-way test valves and (6) 3-way test valves, LP 5000 psi maximum test pres...[more] 2298 Power Team Air Hydraulic Pump 2299 Multi-Stage Coolant Pump 2300 Gusher Pump Model MSC4-11-1000FJ-4, 10 HP, S/N 1225-651 2301 Coolant / Liquid Pump 2302 A-Ryung Motor T-Rotor Pump 3 PH Induction Motor, S/N 05083933, HP: 2 (1.5 KW), 4 PH; HZ: 50/60; Volts: 200/220, Amps: 6.9/6.66 2303 Teel-Fasco Pump 2304 Little General Pump 2305 Submersibal Pump 2306 Lot of 3: Mitsubishi Split System Heat Pump, Model MXZ-3B 24 NA 2307 (2) Cyclodial Motors BWE63-84 2308 Allen Bradly AC Servo Motor, Bulletin 1326 P/N 122265, S/N 12389: Outpower: 7.5 KW, Max Speed: 3000 RPM 2309 Brook Crompton Motor Type WP-DF215TS-VX4, Frame: 215TDZ, Product # BC4N010-4DZ, HP: 10, RPM: 1750, HZ: 60, Volts: 230/460, Amps: 26.3/13.2 2310 Dayton Industrial Motor Model 1K065BA, HP: 1, PH: 1, RPM: 1725, Volts: 115/208-230, HZ: 60, AMPS: 13.4/6.8, FR: 56H 2311 Dumore Motor for Grinder: Model 62351J-G843, P/N: R-430-0131, Type: PF, Rise: 55, HP: 1, RPM: 3450/2850, HZ: 60/50, PH: 3 2312 Dumore Motor for Grinder: Model 62351J-G843, P/N: R-430-0131, Type: PF, Rise: 55, HP: 1, RPM: 3450/2850, HZ: 60/50, PH: 3

2313 General Electric Tri-Clad Induction Motor, Model: 5K324BK284B, S/N: DF6141035, Type: K, Frame: 324Y, HP: 40, RPM: 1770, Volts: 230/460, CY: 60, 3 PH, Amps: / 49 2314 General Electric Tri-Clad Induction Motor, Model: 5K4444BZ2A1L, S/N EA233047, Type: K, HP: 75, RPM: 1775, Volts: 207-220/440, CY: 60, 3 PH, Amps: 190/95 2315 General Electric Tri-Clad Induction Motor, Model: 5K4445B21A1F2L, S/N FA243070, HP: 100, RPM: 1775, Volts: 208-220/440, PH: 3, CY: 60, Amps: 245/122.5, Type: K, FR: 445U 2316 Lift -Tech International Motor Type: ZFB100/4DF132L4X-12/2, S/N D615282 0031; KW: 3.7/15.0, Amps: 14.0/29.5, Volts: 460 PH 3, HZ 60, RPM: 850/3500 2317 Lincoln Motor: Model EVDAAF4P15TC61L, Product # LM16246DC, HP: 15, RPM: 1770, KW: 11.2, HZ60, Volts 230/460 PH 3 2318 Lincoln Motor: Model FVEAAF4P20TC61L, Product # LM16249ED, HP: 20, RPM: 1765, KW: 14.9, HZ: 60, Volts: 230/460, PH: 3 2319 Louis Allis Co. Flexitorq DC Motor, Model 9826292001, TY: BN1, HP: 300, Volts: 300, Rise: 60, Amps: 432, FR: D685A, RPM: 1750 2320 Marathon Electric XR1 High Efficiency, Model LK256TTGN65318DL, Part #E506, S/N C0133580-09/05-04, Type: TGS, HP: 20, RPM: 1775, HZ: 60, Volts: 230/460, KW: 14.9, 3 PH, NEW: 9/12 2321 Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA10KMBWNFC, S/N 98070008, Torque: 47.8 NM, 200V, 41.6 A, RPM: 2000, FR: 133, WT: 144 kgs, Toshiba Machine Co. 2322 Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA370MBWNED, S/N 98110004, Torque: 17.7 NM, 200V,, 12.7 A, RPM: 2000, 133 HZ, WT 5.5 KG, Toshiba Machine Co. 2323 Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA400MBWBFD, S/N 99010002, Torque: 19.1 NM, 200 V, 19.1 A, RPM: 2000, 133 HZ, Output: 4.0 KW, WT: 59 Kgs, Toshiba Machine Co. 2324 Matsushita Electric Industial (Shibaura), AC Servo Motor Model MFA650MBWNEC, S/N 98060003, Torque: 31.4, Rate Rev: 2000, Inertin: 490, WT: 91 kgs, Toshiba Machine Co. 2325 MS-Chalmers Mfg. Co, Ohio; S/N 816EZ-N34344-78, FR: D4, HP: 20, PH: 3, CY: 60, RPM: 1160, Volts: 220/440, mps: 51.6/25.8 2326 Pellizari Motor Model EC160M4, S/N 2702305, CV: 15, H: 1750, HZ: 60, Volts: 220/440, Amps: 39.2/19.6 2327 Reuland Motor Type HPGW-10, Product # 0020C-1KAL-0011, S/N 94-3296A-1, HP: 2, RPM: 1800/164, HZ: 60, Volts: 220/440, Amps: 6.0/3.0 2328 US Motor Model G40115, ID #U04U0230404F, FR: 182T, Type: UT, HP: 3, PH: 3, HZ: 60, RPM: 1750, Volts: 208/230/460 2329 20 HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA 2330 20 HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA

2331 20 HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA 2332 20 HP Pangborn Model RIM-LOC 265DD-2 Rotoblast Shot Blast Motor, new 2008, 20 hp, up to 290 fps abrasive velocity, 26.5" tip to tip vanes, 2" vane width, direct drive motor, S/N NA 2333 Heald Model H-17 Red Head Motor, 19.8 kw motor, 17,000 rpm, 350 V / 567 Hz / 51 A (3 phase - 4 poles), Unit# 511-253300-350, Part# 7-15058-350, S/N 123722 2334 Heald Model H-60 Red Head Motor, 6 kw motor, 60,000 rpm, 350 V / 1000 Hz / 17.5 A (3 phase - 2 poles), Unit# 501-253300-350, Part# 7-15054-350, S/N 123660 2335 Reconditioned, GE Model 752 1,000 HP DC Drilling Motor with 10 HP Blower Assembly, unit was being used as a test stand for AC synchronous generator manufacture / repair shop, S/N NA 2336 FOLLOW REST, 3" CAPACITY, 9-1/2" CENTER HEIGHT 2337 FOLLOW REST, 4" CAPACITY, 11" CENTER HEIGHT FOR: 20" SUMMIT 2338 FOLLOW REST, 5" CAPACITY, 9" CENTER HEIGHT FOR: 14" SUMMIT 2339 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2340 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2341 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2342 NEW, FOLLOW REST, 5" CAPACITY, 9-1/2" CENTER HEIGHT 2343 NEW, FOLLOW REST, 6" CAPACITY, 15" CENTER HEIGHT 2344 NEW, STEADY REST, 18" HOLE, 22" CENTER HEIGHT, 16" BASE 2345 NEW, STEADY REST, 20" HOLE, 20" CENTER HEIGHT, 16" BASE 2346 NEW, STEADY REST, 23" HOLE, 25" CENTER HEIGHT, 19" BASE 2347 NEW, STEADY REST, 5" HOLE, 9" CENTER HEIGHT, 11" BASE 2348 NEW, STEADY REST, 9" HOLE, 9" CENTER HEIGHT, 11" BASE 2349 Roller Rest; Bearing Type 12-1/2" Center, Lehmann 2350 Steady Rest: 17" Hole; 15" Center Height; 16" Base 2351 Steady Rest: 9" Hole; 15" Center Height; 17" Base

2352 Steady Rest: 14" Hole; 18-1/2" Center Height; 17" Base 2353 Steady Rest: 18" Hole; 18" Center Height; 17" Base 2354 Steady Rest: 18" Hole; 16" Center Height; 18" Base 2355 Steady Rest: 7" Hole; 12" Center Height; 10-1/2" Base 2356 Steady Rest: 6" Hex Hole; 10" Center Height; 9" Base 2357 Steady Rest: 14" Hole; 12" Center Height; 10" Base 2358 Steady Rest: 12-1/2" Hole; 17-1/2" Center Height; 21" Base 2359 Steady Rest: 15" Hole; 13" Center Height; 17" Base 2360 Steady Rest: 6" Hole; 10-1/2" Center Height; 10-1/2" Base 2361 Steady Rest: 6" Hole; 10-1/2" Center Height; 10-1/2" Base 2362 Steady Rest: 6-1/2" Hole; 10-1/2" Center Height; 10" Base 2363 Steady Rest: 6" Hole; 10" Center Height; 11" Base 2364 Steady Rest: 6" Hole; 6-1/2" Center Height; 6" Base 2365 Lot: Supports and Follow-Rests 2367 Warner & Swasey Steady Rest Model 5070, Capacity 4 to 11 inches 2368 STEADY REST, 22" CENTER HEIGHT, 19" HOLE, 24" BASE 2369 STEADY REST, 6" HOLE, 10" CENTER HEIGHT, 9-1/2" BASE 2370 Rohm Hydraulic Self-Centering Steady Rest S/N SLZ-200360 2371 Chuck Rack 2372 Desk Type Cabinet with contents 2373 Flammable Safety Cabinet 2374 Flammable Safety Cabinet

2375 Heavy Duty Cabinet with (4) glide out shelves, Kane Engineering; 57 x 39 x 63 2377 Heavy Duty Tool Cabinet: (11) drawers with contents, 45 x 28 x 46 2378 Holding Tank: 520 gallon with safety enclosure S/N 0688801 2379 Justice Spill Containment for barrels 2380 Justice Spill Containment for barrels 2381 Kennedy Tool Box on casters: 5 drawer with contents; 27 x 18 x 34 2382 LISTA 4 Drawer Slide Out Shelve, Single doors, with contents OAD: 28" W X 28" D X 59-1/2" H 2383 LISTA Drawer Tool Cabinet, 2 doors, oad: 28" W x 29-1/2" D x 59-1/2" H, with contents 2384 Lot of 2: Cabinets with contents 2385 Lot of 2: Metal Tank for storing fluids 2386 Lot of 2: Metal Tool Cabinets: 2 door, 2 shelves; 2387 Lot of 2: Spill Containment - 2 sizes 2388 Lot of 2: Tool Cabinet: 12 drawers with 4 dividers each drawer with contents 2389 Lot of 2: Work Stations with backdrop, fluorescent lights 2390 Lot of 3: Chuck Stands 2391 Lot of 3: Chuck Stands 2392 Lot of 3: Chuck Stands 2392A LOT OF 3 CHUCK STANDS 2393 Lot of 5: Tool Boxes 2394 Metal Supply Cabinet; 2 door, with lock 2395 Pipe Cart 2396 Tool Cabinet: 2 door, 2 shelves, pull-out drawers, with contents: 36 x 25 x 35

2397 Tool Cabinet: Double Door, (6) drawers, with contents; 29 x 29 x 64 2398 Tool Rack with bins and contents 2399 Torin Tool Cart Set: Multi Drawer with contents 2400 Truck Tool Box 2401 Tool Cabinet 2402 Work Station, multi drawer, with contents; 96 x 30 x 31 2403 Heavy Duty Cat 60 Tooling: Davis #M.1301.1607, Ref: 374-01002-10 2404 Heavy Duty Cat 60 Tooling: Collis 67845, 50VF1.00EM, 4.0 PRO W3 USA 2405 Heavy Duty Cat 60 Tooling: Universal Eng. 163842 2406 Heavy Duty Cat 60 Tooling: Davis 314-01006-00 1.750 1.1/2 2407 Heavy Duty Cat 60 Tooling: G 314-02266-00 2408 Heavy Duty Cat 60 Tooling: S/N N/A 2409 Heavy Duty Cat 60 Tooling: The Warner & Swasey Co. No. 4165, Cleveland, OH, USA 2410 Heavy Duty Cat 60 Tooling: Davis 374-00990-10 2411 Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing No. 14, Cap. 0-1/2 2412 Heavy Duty Cat 60 Tooling: Carboloy CV50-EM 800-1250EDP#60798 6263 2413 Heavy Duty Cat 60 Tooling: S/N N/A 2414 Heavy Duty Cat 60 Tooling: S/N N/A 2415 Cat 60 Tooling: Parlec C60-500K2, 14632 Made in USA 2416 Heavy Duty Cat 60 Tooling: S/N N/A 2417 Heavy Duty Cat 60 Tooling: Davis 374-01000-10, 5.000 2418 Heavy Duty Cat 60 Tooling: Davis 374-01176-00

2419 Heavy Duty Cat 60 Tooling: Davis 374-01001-10 9.485 2420 Heavy Duty Cat 60 Tooling: G 374-01177-10 2421 Heavy Duty Cat 60 Tooling: G 374-01001-10 2422 Heavy Duty Cat 60 Tooling: G&L Davis M.1006.8636 2423 Heavy Duty Cat 60 Tooling: G 374-02429-00 2424 Heavy Duty Cat 60 Tooling: G 374-00999-10 2425 Heavy Duty Cat 60 Tooling: G 374-00999-10 2426 Heavy Duty Cat 60 Tooling: 290-19-08-06 2427 Heavy Duty Cat 60 Tooling: S/N N/A 2428 Heavy Duty Cat 60 Tooling: S/N N/A 2429 Heavy Duty Cat 60 Tooling: Sandvik Coromant A390.45.60 80 100M, Made in Germany 2430 Heavy Duty Cat 60 Tooling: Sandvik Coromant, A390.45.60 80 100M, Made in Germany 2431 Heavy Duty Cat 60 Tooling: S/N N/A 2432 Heavy Duty Cat 60 Tooling: Davis M.1006.9083 2433 Heavy Duty Cat 60 Tooling: G 374-01177-10 2434 Heavy Duty Cat 60 Tooling: G 374-01000-10 5.000 2435 Heavy Duty Cat 60 Tooling: G 374-02255-00 2436 Heavy Duty Cat 60 Tooling: G 374-00997-10 2437 Heavy Duty Cat 60 Tooling: S/N N/A 2438 Heavy Duty Cat 60 Tooling: Parlec C60-50DK2 0476 Made in USA 2439 Heavy Duty Cat 60 Tooling: Kennemetal A40 NER4 NH3 2440 Heavy Duty Cat 60 Tooling: Davis 374-01178-00

2441 Heavy Duty Cat 60 Tooling: Parlec C60-50DK2, 25183, Made in USA 2442 Heavy Duty Cat 60 Tooling: Davis M.1006.8636 2443 Heavy Duty Cat 60 Tooling: G 374-01001-10 2444 Heavy Duty Cat 60 Tooling: G Davis 374-00999-10 2445 Heavy Duty Cat 60 Tooling: G 374-02429-00 2446 Heavy Duty Cat 60 Tooling: Davis 374-00999-10 2447 Heavy Duty Cat 60 Tooling: Sandvik Coromant, A390.45-60 80 100M, 5130-0002, Made in Germany 2448 Heavy Duty Cat 60 Tooling: Davis M.1006.9083 2449 Heavy Duty Cat 60 Tooling: Davis 1006 8641 2450 Heavy Duty Cat 60 Tooling: Parlec C60 50 DK2 US 7583 2451 Heavy Duty Cat 60 Tooling: Davis 1006 9084 2452 Heavy Duty Cat 60 Tooling: Parlec C60 50DK2 USA 0475 2453 Heavy Duty Cat 60 Tooling: G 374-D1001 10 2454 Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N*14 Cap 0.1/2 2455 Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N14 Cap 0.1/2 2456 Heavy Duty Cat 60 Tooling: Davis 37402209-10 2457 Heavy Duty Cat 60 Tooling: S/N N/A 2458 Heavy Duty Cat 60 Tooling: M1006-9084 2459 Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N 14 Cap 0.50 2460 Heavy Duty Cat 60 Tooling: Parlec C60 50DK2 USA 0476 2461 Heavy Duty Cat 60 Tooling: G 374 01 0010 5-000 2462 Heavy Duty Cat 60 Tooling: Super Chuck Jacobs Ball Bearing N 14 Cap 0.50

2463 Heavy Duty Cat 60 Tooling: 16192 2464 Heavy Duty Cat 60 Tooling: Davis 1301 1607 2465 Heavy Duty Cat 60 Tooling: M1006 6471 2466 Heavy Duty Cat 60 Tooling: Davis 1006 6471 2467 Heavy Duty Cat 60 Tooling: G 374 02429 00 2468 Heavy Duty Cat 60 Tooling: M 1006 6471 2469 Heavy Duty Cat 60 Tooling: S/N N/A 2470 Heavy Duty Cat 60 Tooling: S/N N/A 2471 Heavy Duty Cat 60 Tooling: G 000 59261 19 2472 Heavy Duty Cat 60 Tooling: Davis 374 01176 00 2473 Heavy Duty Cat 60 Tooling: S/N N/A, Super Chuck Jacobs Ball Bearing No. 16, Cap. 1/8-5/8 2474 Heavy Duty Cat 60 Tooling: EA 2124 2475 Heavy Duty Cat 60 Tooling: 4A 2476 Heavy Duty Cat 60 Tooling: HTD-16082-2 2477 Heavy Duty Cat 60 Tooling: HTD-16069-096556 2478 Heavy Duty Cat 60 Tooling: HTD-16069-096556 2479 Heavy Duty Cat 60 Tooling: HTD-16069-096556 2480 Heavy Duty Cat 60 Tooling: S/N N/A 2481 Heavy Duty Cat 60 Tooling: HTD-16082-2-096559 2482 Heavy Duty Cat 60 Tooling: S/N N/A 2483 Heavy Duty Cat 60 Tooling: HTD-16082-2-096559 2484 Heavy Duty Cat 60 Tooling: S/N N/A

2484A Heavy Duty Tooling: Davis 374-01179-00 2484B Heavy Duty Tooling: M1301.1607 2484C Heavy Duty Tooling: Davis 374-01000-10 5.000 2484D Heavy Duty Tooling: T#9 2484E Heavy Duty Tooling: HTD 16016 G125 096557 2484F Heavy Duty Tooling: ANDIS 16FDX3711-1 2 Lanomatic 2485 Heavy Duty Cat 60 Tooling: Full Pallet of Jaws 2486 Cat 50 Tooling: Universal Eng. 163842 2487 Cat 50 Tooling: TSO Universal 163842 2488 Cat 50 Tooling: Parlec C50-15EM6 12663, Made in USA 2489 Cat 50 Tooling: Universal Eng. 280681, Pat. 3451686, No. 2 2490 Cat 50 Tooling: Parlec C50-10SC5, 14632, Made in USA 2491 Cat 50 Tooling: Universal Eng. 463637 2492 Cat 50 Tooling: Parlec C50-15SM6 0001476, Made in USA 2493 Cat 50 Tooling: Sandvik Coromant, A390.4504-50 50 060, Made in Germany 2494 Cat 50 Tooling: S/N N/A 2495 Cat 50 Tooling: Sandvik Coromat A390 4504 5050 060 Made in Germany 2497 Aloris Tool Bar Holders: (2) D50EA-41-250 2498 Aloris Tooling D Series: (1) DA-4, (1) DA-41, (1) DA-2 2500 Aloris Tooling: Lot of 4: (2) DA-1, (1) DA-2, (1) DA-4 2501 Aloris Tooling: Lot of 4: (3) CA-2, (1) CA-4 2502 Aloris Tooling: Lot of 4: (3) DA-4Q, (1) DA-4l

2503 Aloris Tooling: Lot of 4: CA-1 2504 Aloris Tooling: Lot of 6, DA-1 2505 Aloris Tooling: Lot of 6, DA-1 2506 Aloris Tooling: Lot of 6, DA-1 2508 Assorted Tools and Tool Holders 2509 Bearing Puller 2510 Bolt Tension Tester 2511 Bullard 42" Cutmaster Transmission and End Housing 2512 Bullard 74 Cutmaster Crossrail with Side Turret & Ram 2513 Bullard Inlet Air Line Filter Model 41P2 2514 Bullard Side Head 2515 Bullard Spiral Drive: Crossrail & Turret 2516 Center - Medium 2517 Cleto Air Grinder Model 15V-C60 S/N J38029 2518 Cross-slide for lathe 2519 Cross-slide for lathe 2520 Enerpac General Purpose Doubel Acting Hydraulic Ram 2521 Enerpac Low Profile Hydraulic Ram Jack 2522 Enerpac Model HVM-4 Hydraulic Electric Pump 2523 Enerpac Model P392 Hydraulic Hand Pump 2524 Enerpac Model P392 Hydraulic Hand Pump 2525 Enerpac Model P84 Hydraulic Hand Pump

2526 Enerpac Model P84 Hydraulic Hand Pump, Never Used 2527 Enerpac Model P18 Hydraulic Hand Pump 2528 TK Model RC6010T Hydraulic Ram Jack 2529 Hydraulic Hand Pump Set 2530 Enerpac Twin Cylinder Hydraulic Unit 2532 Fixture: 24" x 24" 2533 Bryant Model 269 G-2-23446 Grinding Spindle, 18" length, 4" dia., 11,000 rpm max. speed, S/N NA 2534 Hand Pump for lubricants 2535 Heavy Duty Center 2536 Heavy Duty Metal Table with Vise, Grinder, and moveable work station; 48" x 48" x 41" tall; 3/4" solid metal top, with 2 lower shelves 2537 Heavy Duty Tool Post 11" x 11" 2538 Heavy Duty Tooling: Set-up Tooling 2539 Heavy Duty Tooling: Set-up Tooling 2540 Heavy Duty Tooling: Set-up Tooling 2541 Heavy Duty Tooling: Set-up Tooling 2542 Hoshizak Ice Maker Model DCM-500BAF 2543 Hydraulic Pump, Model KT4578, S/N 5020251, Entwistle Co. 2544 Live Center 2545 Lot of 2: (1) Skidmore-Wilhelm Model K S/N 5402, (1) Wilhelm Model RL S/N 9870, mounted on metal table with shelf 2546 Lot of 2: Bullard Elevating Screws for Bullard Cutmaster, R/L 88" L x 1-1/2" dia 2547 Lot of 2: ESKO Sealing Liquid Monitor SFM35 2548 Lot of 2: Live Centers

2549 Lot of 2: Pressure Tools 2550 Lot of 2: Tool Posts 2551 Lot of 3: Tool Posts 2552 Lot of 4: Tool Post 2553 Aloris Tool Bar DA-4 2554 LOT of 2: Tooling Taper Attachment 2555 LOT of 2: Tooling; Steady Rest and Angle Plate 2556 Lot of 2: Face Cutters, (1) 20" dia x 5" hole (1) 16" dia x 5" hole 2557 Lot of 2: Face Cutters, (2) 16" dia x 5" hole x 2-1/2" hole 2558 Lot of 4 pcs: Tooling for Lucas 2559 LOT of 6: Aloris Tool Holder DA2 2560 Lot of 6: Assorted Tool Holders 2561 Lot of 6: Reels new in box 2562 Lot of Cutting Tools 2563 Lot of Cutting Tools and Collets 2564 Lot of Drills 2565 Lot: Centers - Asst. sizes 2566 Lot: Drills 2567 Lot: Assorted Tooling including cutters, reamers, etc 2568 Lot of Bridgeport Tooling 2569 Lot of Misc Tooling 2570 Lot of Misc Tooling

2571 Lot of Thread Heads, new in box, 1.00-8 UNC 45 degree 2572 Lot of Tool Bits: Original packing - Various sizes 2573 Lot of Tool Bits: Original packing - Various sizes 2574 Lot of Tool Bits: Original packing - Various sizes 2575 Lot of Tool Bits: Original packing - Various sizes 2576 Lot of Tools, Fixture, and Misc. 2577 Lot of Tools; various size 2578 LOT: 50 Taper Tooling 2579 LOT: Aloris Tool Holders various sizes 2580 LOT: Bullard Dynatrol Parts for Rebuild Purpose. Assorted parts, motor; In metal tubs and pallets for easy removal. 2581 Lot: C Clamps various sizes 2582 LOT: Centers - asst sizes 2583 Lot: Extra Large Wrenches and Misc. Tools 2584 Lot: Filters - Assorted Makes and sizes 2585 Lot: Heavy Clamping Fixtures 2586 Lot: Heavy Duty Sockets with (1) Multiclaimer Wrench 2587 Lot: Heavy Duty Sockets, asst. sizes 2588 LOT: Lathe and Bridgeport Tooling 2589 LOT: Leveling Pads, assorted brands, sizes 2590 Lot: Love Joys 2591 Lot: Machine Handles, Wheel Type 2592 Lot: Machine Screws; assorted length & diameters, on cantilever rack

2593 Lot: Misc. Tooling 2593A Tooling & Accessories: (2) Kennemetal D Clamping Boring Bars, (2) Kennemetal D Clamping Boring Bars 2594 LOT: Morris Taper Tooling, 40 + items 2595 Lot: Roller Stands 2597 NEW, MORI SEIKI FRONT DOOR FOR MODEL SL-65 2598 NEW: Mechanical Seal by AESSEAL, Model AZT01754TTTTE57 / GBR986976/Z 2599 Safety-Kleen Model 81 Solvent Agitating Parts Washer, premium solvent, QSOL, 220/300, PD 680 type II, PRF 680 type II, PRF 680 type III, odorless solvent, manual / automatic operation, 250 lbs. load cap., 36" sink height, 21" sink width, 45" sink length, 14" liq. Freeboard, 80 gal. std. fill, ambien...[more] 2600 MAGNUS MODEL AL, SIZE 2 PARTS WASHER 2601 PARTS WASHER 2602 Royson Hatboro Vibra Machine 2603 Apex Vertical Broaching Machine, Apex Vertical Table-Up Broaching Machines operate from floor level, no platform or pit is required, have automatic tool handling, can perform a helical operation and is suitable for cell manufacturing with high production rates. No detailed specifications for this pa...[more] 2604 Welding Cell, 9' x 9' Ransome Welding Manipulator on Travel Cart with Lincoln DC-1000, 20 Ton Worthington Turning Rolls, and Track System, new 1984, 9' x 9' Ransome manipulator: 9' boom vert. travel, 9' boom horiz. travel, 3.7-150 ipm boom speed, 40 ipm elev. Speed, S/N 9528412; Ransome manipulato...[more] 2605 Ransome Model 8X8 Welding manipulator on Power Cart with Tandem ARC Set Welding System, new 1975, 8' boom hor. trvl, 8' boom vert. trvl, 3.7-150 ipm boom hor. speed, 40 ipm boom vert. speed, 350 lbs. boom end load, 0.5 hp reach motor, 0.5 hp lift motor, var. speed poweer cart, 4-way power cross s...[more] 2606 24,000 Lb. Ransome Model 7-H / 7-T Adjustable Height Headstock / Tailstock Welding Positioner, new 1970, Drive Unit: 46" table dia., 4 radial slots, 7.5" thru-hole, 12" gravity center, 12" eccentricity, 288,000 in-lbs rot. Torque, 0.01-0.50 rpm rot. speed, 7.5 hp motor, 8 ht. pos. on 6" centers,...[more] 2606A 6,000 Lb. Ransome Model 60P-A Adjustable Height Welding Positioner, 6,000 lb. cap., 12" gravity center, 12" eccentricity, 9" inherent overhang, 60" table dia., 6 radial T-slots, 43.5" - 61.5" table height adj., 0.025-1.00 rpm table speed, 2 hp rot. motor, 72,000 in-lbs rot. torque, 0-135 deg....[more] 2607 10 Ton Preston-Eastin Model TDRA10HD/TIRO10HD Welding Turning Rolls, new 2008, 20,000 lbs. cap., 6" - 144" dia. range, 1.5-45 ipm roller speed, 0.75 hp drive motor, 12" dia. x 4.5" wide roller wheels, pendant control, wt, drive (approx.): 1100 lbs., wt, idler (approx.): 650 lbs., S/N NA 2608 New, 5 Ton Steady-Weld Model R5-SA Self-Adjusting Turning Rolls, new 2019 (never used), 11,000 lbs. load cap., 9.8" - 90.5" dia. range, 4-40 ipm roller speed (VFD), 1 hp drive motor, remote pendant, foot pedal, UL electrics, oad, drive unit: 74.3" x 22" x 25.8" high, oad, idler unit: 48" x 12.1" x...[more]

2609 Lincoln Electric Model 250 GTX Gas Powered Weldong Power Source, processes: stick/tig/mig/flux-cored/gouging, 50-250A AC/DC output, 10,000 watts continuous generator output, Kohler OHV Command CH730 engine, 23 hp at 3600 rpm, 2 cyl., totally enclosed case, oad (approx.): 30" x 22" x 43" high, wt (...[more] 2610 Lot of 3: Welding Guns 2611 Spray Welder Control 2612 Lot: Welding Items, Gauges, Hoses, Torch 2613 Lot of 3: Welder Footpedals; (1) Miller KJ12, (1) Miller KK22, (1) Profax MFC14 2614 T-Slotted Stationary Table 42" x 42" x 4"