Box Cover This attractive cover system has been designed to complement the Pipe Cover and Skirting Cover product ranges. Talon Box Cover profile is offered in a range of sizes and is ideal in situations where larger pipework or multi-pipe applications need to be covered or protected. The largest size ( x ) is specifically designed to cover unsightly soil and vent pipes. Supplied in 3 metre lengths, the cover is manufactured from the same quality grade extruded upvc as the Talon Pipe Cover and Skirting Cover ranges. The material is rated to a UL94 V-0 flame spread rating and is also resistant to both mild acids and alkalis. Talon Box Cover has excellent resistance to weathering making it suitable for both interior and exterior use. Correctly supported, Talon Box Cover can be used at temperatures ranging from -0 C to +60 C. Cover can be used with pipe heated to +80 C if not in direct contact. 32 Tel: 0845 095 2828 Fax: 0845 095 2929
Box Cover Box Cover DIM B DIM A Talon Box Cover is easily fitted both vertically and horizontally via the Fixing strips supplied - these are also manufactured from upvc for added strength and uniformity. Box Cover is easy to cut to size using traditional tools and is suitable for both internal and external use. Code DIM A DIM B Pack Quantity CB255/3 CB575/3 CB55/3 CB2075/3 CB205/3 CB2020/3 25mm x 55mm x 3.0 metres 50mm x 75mm x 3.0 metre 50mm x 50mm x 3.0 metre x 75mm x 3.0 metre x 50mm x 3.0 metre x x 3.0 metre 25mm 50mm 50mm 55mm 75mm 50mm 75mm 50mm Extension Strips If dimension A or B need to be increased two extension strips are available that can increase width or depth by 50 or 00 mm. Each Extension Strip requires a Joining Strip. Extension Strip 50mm x 3.0 metre Extension Strip 00mm x 3.0 metre Joining Strip 3.0 metre ACE50/3 ACE00/3 ACJS/3 50mm Extension Strip 00mm Extension Strip Joining Strip Email: sales@talon.co.uk www.talon.co.uk 33
Box Cover Accessories Box Cover Accessories Designed for use with all Talon Box, this Universal Accessory Range offers an easy trim to size option. Accessories will fit all Box Covers offering a maximum coverage size of x. The accessories are marked on the reverse side to show the installer where to trim if using with smaller Box. Stop End Inside Corner Outside / Flat Corner Straight Connector AB2020SE ABIC ABOC ABSC Stop End Inside Corner Outside / Flat Corner Straight Connector Vent Accessories 20mm Vent Plug 70mm Vent Plug AVP20 AVP70 0 0 20mm Vent Plug 70mm Vent Plug 34 Tel: 0845 095 2828 Fax: 0845 095 2929
U-Box Cover U-Box is one of the largest cover systems available from Talon. A standard U-Box Cover kit contains two Box Cover Profiles, two Fixing Strips and a Joining Strip. Assemble the sections to create a U shaped cover. A wide range of standard sizes can be supplied, 50mm and 00mm wide extension pieces are also available to allow the depth or width to be varied where necessary. Size range (corner sections) CUC/3 Kit - 75mm x x 3.0 metre CUC2/3 Kit 2-50mm x x 3.0 metre CUC3/3 Kit 3 - x x 3.0 metre CUC4/3 Kit 4-75mm x 50mm x 3.0 metre CUC5/3 Kit 5-50mm x 50mm x 3.0 metre Kit description (overall sizes) Kit - Makes U-Box 50mm x or 75mm x 400mm Kit 2 - Makes U-Box 50mm x 400mm or 300mm x Kit 3 - Makes U-Box 400mm x Kit 4 - Makes U-Box 75mm x 300mm or 50mm x 50mm Kit 5 - Makes U-Box 50mm x 300mm CUC U-Box Cover 75mm x 400mm CUC2 U-Box Cover 50mm x 400mm Email: sales@talon.co.uk www.talon.co.uk 35
Boiler Flue Box Cover Talon Boiler Flue Box Cover is ideal for covering exposed boiler flue pipe. Manufactured from upvc, Boiler Flue Box Cover is easy to clean, easy to install and requires minimum maintenance. Boiler Flue Box Cover consists of two corner profiles, two fixing brackets, one joining strip and a stop end accessory. Metre Kit 2 Metre Kit 3 Metre Kit CUF/ CUF/2 CUF/3 Boiler Flue Stop End Boiler Flue Box Cover measures 50mm x and is available in, 2 or 3 m lengths. Boiler Flue Box Cover Site installation (BEFORE) Site installation (AFTER) 36 Tel: 0845 095 2828 Fax: 0845 095 2929
Boiler Box Cover Manufactured from the same quality upvc as all other Talon profiles, Talon Boiler Box offers a neat solution where unsightly boiler pipework (or flues) need to be covered. Supplied in kit form the white upvc profile can easily be trimmed to the correct height. Boiler Box is supplied in 500mm lengths. Saves time and overall cost Easy to install Supplied in 500mm lengths, just trim to desired height Removeable for future maintenance to boiler Deep gloss finish, easy to maintain Excellent weather resistance Resistant to both acids and alkalis Available in a range of sizes, overall dimensions of: Unsightly pipework prior to Boiler Box Installation 75mm deep x 400mm wide 50mm deep x 400mm wide deep x 400mm wide Each kit contains: 2 x right angle sections (cover sections) 2 x Fixing Strips x Centre Joining Strip CUB/500 CUB2/500 CUB3/500 Kit description (overall sizes) Kit - Makes Boiler Box 75mm x 400mm Kit 2 - Makes Boiler Box 50mm x 400mm Kit 3 - Makes U-Box x 400mm Email: sales@talon.co.uk www.talon.co.uk 37