Climate Ready Control Systems Technical Specifications

Climate Ready Control Systems Technical Specifications

Climate Ready Control Systems Climate Ready Control Systems consist collectively of motor controllers, other hardware and software packages that will operate all facade element/s for eg shading systems, ventilation systems and other motorised systems which require precise operation control (preset stops in angle degree or mm). Climate Ready Control Systems are installed wireless, hardwired or a combination of both. EZ - ZigBee PRO WiFi systems Suitable for constructions requiring: building /updating (one or more levels) to include multiple facade elements updating wiring in existing buildings with ceiling access a highly precise and responsive control system digital or analog sensors for dynamic response air conditioning, security, lighting automation, etc audio visual product integration remote access a system that can be upgraded easily. Features ZigBee PRO WiFi system requires significantly less wiring than other control systems. EZ systems can be networked and/or dynamic operated. Each EZ1 controller operates 1 motor. Project configuration available (2 or 4 motors). Operates all Horiso Solar Control Systems and other manufacturers products. Integrates with a range of audio visual and building automation systems. Large range of control options available. Upgrade options - remote access via iphone, smart phone, ipad etc. Benefits Significantly reduces electrical material, components and installation costs. System networked with A/V products, building automation systems and/or respond to weather conditions. One control system operates a range of facade elements. Easy integration due to open protocol requirements. Flexible control options to suit individual project requirements. No replacement of system required for upgrade. EB - hardwired systems Suitable for constructions requiring: 2 or more facade elements for existing (one or more level) buildings updating wiring in existing buildings with ceiling access digital or analog sensors for dynamic response air conditioning, security, lighting automation, etc audio visual product integration remote access a system that can be upgraded easily. Features EB systems can be networked and/or dynamic operated. Each EB2 controller operates 2 motors. Project configuration available (4 motors). Operates all Horiso Solar Control Systems and other manufacturers products. Integrates with a range of audio visual and building automation systems. Large range of control options available. Upgrade options - remote access via iphone, smart phone, ipad etc. Benefits System networked with A/V products, building automation systems and/or respond to weather conditions. One control system operates a range of facade elements. Easy integration due to open protocol requirements. Flexible control options to suit individual project requirements. No replacement of system required for upgrade. If you require further information, please email engineering@horiso.com.au Climate Ready is a registered trademark of Horiso. ST[a]RS & ST[a]RTS are trademarks of Horiso. Information provided in this document may be updated without notice. Horiso 2014. Introduction

Climate Ready Control Systems overview EZ1 N / EZ1 D - ZIGBEE WIFI EB2 N / EB2 D - HARD WIRED HARDWARE SOFTWARE HARDWARE SOFTWARE Control Point ZigBee PRO WiFi (CP - Z) EZ ZigBee PRO Repeater Sensors Analog wind Analog brightness Eco-Mode ZigBee PRO weather station supports control integration with Audio/Visual products Digital Port Expansion unit (DCI) 6 12 Switches ZigBee PRO Horiso Smart Switch Serial Interface (RS232) Server Basic 19 Responses Dynamic brightness Dynamic wind ST[a]ARS ST[a]ATS Audio visual Building automation s Horiso Smart Remote Control App Horiso Smart Shading Server BM Control Panel FM Control Panel Web apps Control Point Router (CP- R) Control Point (CP) Sensors Analog wind Analog brightness Digital wind Digital brightness Eco-Mode Control Panel Control Point Router (CP - R) / ZigBee PRO Repeater supports control integration with Digital Port Expansion unit (DCI) 6 12 Switches Standard Horiso Smart Switch Bluetooth Adaptor Serial Interface (RS232) Server Basic 19 Responses Dynamic brightness Dynamic wind ST[a]ARS ST[a]ATS Audio visual Building automation s Horiso Smart Remote Control App Horiso Smart Shading Server BM Control Panel FM Control Panel Web apps Building automation systems Air conditioning Lighting Security etc Climate Ready Control Systems - EZ1 N / EZ1 D Totally wireless - EZ1 N - networked - EZ1 D - dynamic response software inclusion All functionality of the EB2 D with - Comprehensive ZigBee PRO WiFi weather sensor responses Audio/Visual system Building automation systems Air conditioning Lighting Security etc Climate Ready Control Systems - EB2 N / EB2 D All hardwired - EB2 N - networked - EB2 D - dynamic response software inclusion Wind and/or brightness sensor responses Control Systems overview

INFORMATION SHEET - Climate Ready EZI D - WiFi Dynamic Motor Controller Power input Hirschmann 3 conductor (2+ ground) 14 AWG max connector (male) + Hirschmann connector (female) Male Hirschmann plug USB connection Female Hirschmann plug Motor output 1 Hirschmann 4 conductor (3+ ground) 14 AWG max connector (female) + Hirschmann connector (male) Universal Serial Bus Macro USB connector Standard USB adaptor cable. Controller Climate Ready EZ1 D Product Information and installation The Climate Ready EZ1 D is a single motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Apart from Horiso Smart Motor Control software (basic), the EZ1 D is unique with software that is shading specific ST[a]ARS (for roller blinds) and ST[a]ATS (for venetian blinds and louvers). It allows a highly precise adjustment to the shading system according to an astrophysical Solar Path Calculus. In addition to controlling two shades, each controller is capable of accepting six dry contact inputs. Optional Control Point modules allow for the addition of sensors and A/V system integration. The Climate Ready EZ1 D Controller can operate stand-alone, networked and / or dynamic using wireless BACnet over ZigBee PRO. No activity on the network. The Climate Ready EZ1 D Controller positions facade element/s based on input from: Users - WiFi Smart Switch or Climate Ready Building Manager Software Solar Path Calculus with FIM (Facade Intelligence Modelling) - solar tracking based on building location, distance, height and facade orientation Sensors - including sun, wind, temperature and occupancy BMS or A/V Systems - BACnet over ZigBee PRO WiFi, or dry contact via USB hub Motor 1 reverse Signals motor 1 to move Motor 1 forward Signals motor 1 to move Bind ZigBee PRO. Net Technical data Supply voltage 110-240 VAC at 50 / 60 Hz Dimensions Length - 170 mm / Width - 50 mm / Height - 40 mm Output 1 x 240 VAC (max. 3A) Digital inputs 12 max. x Dry Contacts Input via USB Expansion Port Data network BACnet over ZigBee PRO WiFi at max. 115,200 bps Data encryption 128-bit Environmental 0-55 C at 0-95% RH (non-condensing) USB connection Micro USB connection for data connection and USB switch expansion Power connection Hirschmann 3-pin male and female connectors. EZ1 D - WiFi Dynamic Motor Controller

INFORMATION SHEET - Climate Ready EZI N - WiFi Network Motor Controller Power input Hirschmann 3 conductor (2+ ground) 14 AWG max connector (male) + Hirschmann connector (female) Male Hirschmann plug USB connection Female Hirschmann plug Motor output 1 Hirschmann 4 conductor (3+ ground) 14 AWG max connector (female) + Hirschmann connector (male) Universal Serial Bus Macro USB connector Standard USB adaptor cable. Controller Climate Ready EZ1 N Product Information and installation The Climate Ready EZ1 N is a single motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Included is a basic software package, the Horiso Smart Motor Control that provides safety soft limits (prevents damage if motor limits fail). Precise facade element/s adjustment in angle degree or mm for facade uniformity, preset stops, programmable parameters and basic scheduling. Each controller is capable of accepting six dry contact inputs. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The Climate Ready EZ1 N Controller can operate stand-alone or networked using wireless BACnet over ZigBee PRO. No activity on the network. The Climate Ready EZ1 N Controller positions facade elements/s based on input from: Users - WiFi Smart Switch or Climate Ready Building Manager Software Sensors - including sun, wind, temperature and occupancy BMS or A/V Systems - BACnet over ZigBee PRO WiFi, or dry contact via USB hub Motor 1 reverse Signals motor 1 to move Motor 1 forward Signals motor 1 to move Technical data Supply voltage 110-240 VAC at 50 / 60 Hz Dimensions Length - 170 mm / Width - 50 mm / Height - 40 mm Output 1 x 240 VAC (max. 3A) Digital inputs 12 max. x Dry Contacts Input via USB Expansion Port Data network BACnet over ZigBee PRO WiFi at max. 115,200 bps Data encryption 128-bit Environmental 0-55 C at 0-95% RH (non-condensing) USB connection Micro USB connection for data connection and USB switch expansion Power connection Hirschmann 3-pin male and female connectors. Bind Net ZigBee PRO. EZ1 N - WiFi Network Motor Controller

INFORMATION SHEET - Climate Ready EZ2 D - WiFi Dynamic Motor Controller Power input Hardwired to internal 3 conductor (2+ ground) 14 AWG max Motor output 2 Hardwired to internal 4 conductor (3+ ground) 14 AWG max Digital inputs 5 Screw terminal CAT 6 Controller Climate Ready EZ2 D Product Information and installation The Climate Ready EZ2 D is a wireless dual motor controller designed specifically for the control of motorized shades. It is compatible with roller,venetian and louver style shading products. The unique and shading specific ST[a]ARS (for Roller Blinds) and ST[a]ATS (for venetian blinds and louvers) allow a highly precise adjustment of the shading system according to an astrophysical Solar Path Calculus. In addition to controlling 2 motors, each controller is capable of accepting 6 dry contacts or 3 switches. Optional Control Point modules allow for the addition of sensors and A/V system integration. The Climate Ready EZ2 D Motor Controller can operate stand-alone or networked using wireless BACnet over ZigBee PRO. Universal Serial Bus Micro USB connector Standard USB adaptor cable. Internal The Climate Ready EZ2 D Motor Controller positions facade element/s based on input from: Users - WiFi Smart Switch or Climate Ready Building Manager Software Solar Path Calculus with FIM (Facade Intelligence Modelling) - solar tracking based on building location, distance, height and facade orientation Sensors - including sun, wind, temperature and occupancy BMS or A/V Systems - BACnet over ZigBee PRO WiFi, or dry contact via USB hub No activity on the network. Up Down Technical data Supply voltage 110-240 VAC at 50 / 60 Hz (power lead with Australian plug) Bind Net ZigBee PRO Dimensions Length - 210 mm / Width - 130 mm / Height - 80 mm Function Select motor channel. Output 2 x 240 VAC - max. 3A (4 core cable with inline connector) Data network BACnet over ZigBee max. 115,200 bps - max. 127 devices per segment Environmental 0-55 C at 0-95% RH (non-condensing) USB connection Micro USB connection for data connection and USB switch expansion Switch connection 3 - pin Phoenix screw terminal Power connection Wired supply cable with Australian plug. EZ2 D - WiFi Dynamic Motor Controller

INFORMATION SHEET - Climate Ready EZ2 N - WiFi Network Motor Controller Power input Hardwired to internal 3 conductor (2+ ground) 14 AWG max Motor output 2 Hardwired to internal 4 conductor (3+ ground) 14 AWG max Digital inputs 5 Screw terminal CAT 6 Controller Climate Ready EZ2 N Product Information and installation The Climate Ready EZ2 N is a wireless dual motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Included is a basic software package the Horiso Smart Motor Control that provides safety soft limits (prevents damage if motor limits fail). Precise facade element/s adjustment in angle degree or mm for facade uniformity, preset stops, programmable parameters and basic scheduling. In addition to controlling 2 motors, each controller is capable of accepting 6 dry contacts or 3 switches. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The Climate Ready EZ2 N Motor Controller can operate stand-alone or networked using wireless BACnet over ZigBee PRO. The Climate Ready EZ2 N Motor Controller positions facade element/s based on input from: Users - WiFi Smart Switch or Climate Ready Building Manager Software Sensors - including sun, wind, temperature and occupancy BMS or A/V Systems - BACnet over ZigBee PRO WiFi, or dry contact via USB hub Universal Serial Bus Micro USB connector Standard USB adaptor cable. Internal Up No activity on the network. Technical data Supply voltage 110-240 VAC at 50 / 60 Hz (power lead with Australian plug) Dimensions Length - 210 mm / Width - 130 mm / Height - 80 mm Output 2 x 240 VAC - max. 3A (4 core cable with inline connector) Data network BACnet over ZigBee max. 115,200 bps - max. 127 devices per segment Environmental 0-55 C at 0-95% RH (non-condensing) USB connection Micro USB connection for data connection and USB switch expansion Switch connection 3 - pin Phoenix screw terminal Power connection Wired supply cable with Australian plug. Down Bind Net Function ZigBee PRO Select motor channel. EZ2 N - WiFi Network Motor Controller

INFORMATION SHEET - Climate Ready EZ4 D - WiFi Dynamic Motor Controller Power input Hardwired to internal 3 conductor (2+ ground) 14 AWG max Motor output 4 Hardwired to internal 4 conductor (3+ ground) 14 AWG max Digital inputs 5 Screw terminal CAT 6 Controller Climate Ready EZ4 D Product Information and installation The Climate Ready EZ4 D is a wireless quad motor controller designed specifically for the control of motorized shades. It is compatible with roller, venetian and louver style shading products. The unique and shading specific ST[a]ARS (for Roller Blinds) and ST[a]ATS (for venetian blinds and louvers) allow a highly precise adjustment of the shading system according to an astrophysical Solar Path Calculus. In addition to controlling 4 motors, each controller is capable of accepting 10 dry contacts or 5 switches. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The Climate Ready EZ2 D Motor Controller can operate stand-alone or networked using wireless BACnet over ZigBee PRO. The Climate Ready EZ4 D Motor Controller positions facade element/s based on input from: Users - WiFi Smart Switch or Climate Ready Building Manager Software Solar Path Calculus with FIM (Facade Intelligence Modelling) - solar tracking based on building location, distance, height and facade orientation Sensors - including sun, wind, temperature and occupancy BMS or A/V Systems - BACnet over ZigBee PRO WiFi, or dry contact via USB hub Technical data Supply voltage 110-240 VAC at 50 / 60 Hz (power lead with Australian plug) Dimensions Output Data network Environmental USB connection Switch connection Power connection Length - 210 mm / Width - 130 mm / Height - 80 mm 4 x 240 VAC - max. 3A (4 core cable with inline connector) BACnet over ZigBee max. 115,200 bps - max. 127 devices per segment 0-55 C at 0-95% RH (non-condensing) Micro USB connection for data connection and USB switch expansion 3 - pin Phoenix screw terminal Wired supply cable with Australian plug. Universal Serial Bus Micro USB connector Standard USB adaptor cable. Internal Up Down Bind Net Function ZigBee PRO Select motor channel. No activity on the network. EZ4 D - WiFi Dynamic Motor Controller

INFORMATION SHEET - Climate Ready EZ4 N - WiFi Network Motor Controller Power input Hardwired to internal 3 conductor (2+ ground) 14 AWG max Motor output 4 Hardwired to internal 4 conductor (3+ ground) 14 AWG max Digital inputs 5 Screw terminal CAT 6 Controller Climate Ready EZ4 N Product Information and installation Universal Serial Bus Micro USB connector Standard USB adaptor cable. The Climate Ready EZ4 N is a wireless quad motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Included is a basic software package the Horiso Smart Motor Control that provides safety soft limits (prevents damage if motor limits fail). Precise facade element/s adjustment in angle degree or mm for facade uniformity, preset stops, programmable parameters and basic scheduling. In addition to controlling 4 motors, each controller is capable of accepting 10 dry contacts or 5 switches. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The Climate Ready EZ4 N Motor Controller can operate stand-alone or networked using wireless BACnet over ZigBee PRO. The Climate Ready EZ4 N Motor Controller positions facade element/s based on input from: Users - WiFi Smart Switch or Climate Ready Building Manager Software Sensors - including sun, wind, temperature and occupancy BMS or A/V Systems - BACnet over ZigBee PRO WiFi, or dry contact via USB hub Internal Up No activity on the network. Technical data Supply voltage 110-240 VAC at 50 / 60 Hz (power lead with Australian plug) Dimensions Length - 210 mm / Width - 130 mm / Height - 80 mm Output 4 x 240 VAC - max. 3A (4 core cable with inline connector) Data network BACnet over ZigBee max. 115,200 bps - max. 127 devices per segment Environmental 0-55 C at 0-95% RH (non-condensing) USB connection Micro USB connection for data connection and USB switch expansion Switch connection 3 - pin Phoenix screw terminal Power connection Wired supply cable with Australian plug. Down Bind Net Function ZigBee PRO Select motor channel. EZ4 N - WiFi Network Motor Controller

INFORMATION SHEET - Climate Ready EB2 D - Hardwired Dynamic Motor Controller Power input Motor 1 output Power input Hirschmann 3 conductor (2+ ground) 14 AWG max connector (male) + Hirschmann connector (female) LINE IN MOTOR 1 MOTOR 2 FORWARD REVERSE FUNCTION FORWARD REVERSE POWER INPUT STATUS NETWORK MOTOR 1 MOTOR 2 MOTOR 2 MOTOR 1 Motor 2 output Motor output 1-2 Hirschmann 4 conductor (3+ ground) 14 AWG max connector (female) + Hirschmann connector (male) Network 1-2 Screw terminal CAT 6 Digital inputs 1-3 Screw terminal CAT 6 Digital inputs USB connection Network Universal Serial Bus Macro USB connector Standard USB adaptor cable Controller Climate Ready EB2 D Product Information and installation The Climate Ready EB2 D Controller is a two motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Apart from Horiso Smart Motor Control software (basic), the EB2 D is unique with software that is shading specific ST[a]ARS (for roller blinds) and ST[a]ATS (for venetian blinds and louvers). It allows a highly precise adjustment to the shading system according to an astrophysical Solar Path Calculus. In addition to controlling two motors, each controller is capable of accepting six dry contact inputs. Optional Control Point modules allow for the addition of sensors and A/V system integration. The Climate Ready EB2 D Controller can operate stand-alone, networked and / or dynamic using BACnet MS/TP. The Climate Ready EB2 D Controller positions facade element/s based on input from: Users - wall switches or a Building Manager Software. Solar Path Calculus with FIM (Facade Intelligence Modelling) - solar tracking based on building location, distance, height and facade orientation. Sensors - including sun, wind, temperature and occupancy. BMS or A/V Systems - BACnet MS/TP, Modbus RTU or dry contact. Technical data Supply voltage 110-240 VAC at 50 / 60 Hz Dimensions Output Digital inputs Data Network Environmental USB Connection Switch connection Power connection Length - 180 mm / Width - 90 mm / Height - 40 mm 2 x 240 VAC (max. 3A each) 6 x Dry Contacts Input (normally open, momentary or latched) BACnet MS/TP at max. 115,200 bps - (max. 127 devices per segment) 0-55 C at 0-95% RH (non-condensing) Micro USB connection for data connection and USB switch expansion 3-pin degson screw terminal Hirschmann 3-pin male and female connectors. No activity on the network Switches Yellow Solid: A dry contact is currently closed Status light is red, switches will control on motors, otherwise switches are disabled Motor 1 reverse Motor 1 forward Function Motor 2 reverse Motor 2 forward Signals motor 1 to move Signals motor 1 to move Initiates various functions Signals motor 2 to move Signals motor 2 to move EB2 D - Hardwired Dynamic Motor Controller

INFORMATION SHEET - Climate Ready EB2 N - Hardwired Network Motor Controller Power input Motor 1 output Power input Hirschmann 3 conductor (2+ ground) 14 AWG max connector (male) + Hirschmann connector (female) LINE IN MOTOR 1 MOTOR 2 FORWARD REVERSE FUNCTION FORWARD REVERSE POWER INPUT STATUS NETWORK MOTOR 1 MOTOR 2 MOTOR 2 MOTOR 1 Motor 2 output Motor output 1-2 Hirschmann 4 conductor (3+ ground) 14 AWG max connector (female) + Hirschmann connector (male) Network 1-2 Screw terminal CAT 6 Digital inputs 1-3 Screw terminal CAT 6 Digital inputs USB connection Network Universal Serial Bus Macro USB connector Standard USB adaptor cable Controller Climate Ready EB2 N Product Information and installation The Climate Ready EB2 N Controller is a one motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Included is a basic software package the Horiso Smart Motor Control that provides safety soft limits (prevents damage if motor limits fail). Precise facade element/s adjustment in angle degree or mm for facade uniformity, preset stops, programmable parameters and basic scheduling. Each controller is capable of accepting six dry contact inputs. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The Climate Ready EB2 N Controller can operate stand-alone or networked using BACnet MS/TP. The Climate Ready EB2 N Controller positions facade elements/s based on input from: Users - wall switches or a Building Manager Software. Sensors - including sun, wind, temperature and occupancy. BMS or A/V Systems - BACnet MS/TP, Modbus RTU or dry contact. No activity on the network Switches Yellow Solid: A dry contact is currently closed Status light is red, switches will control on motors, otherwise switches are disabled Technical data Supply voltage 110-240 VAC at 50 / 60 Hz Dimensions Length - 180 mm / Width - 90 mm / Height - 40 mm Output 2 x 240 VAC (max. 3A each) Digital inputs 6 x Dry Contacts Input (normally open, momentary or latched) Data Network BACnet MS/TP at max. 115,200 bps - (max. 127 devices per segment) Environmental 0-55 C at 0-95% RH (non-condensing) USB Connection Micro USB connection for data connection and USB switch expansion Switch connection 3-pin degson screw terminal Power connection Hirschmann 3-pin male and female connectors. Motor 1 reverse Motor 1 forward Function Motor 2 reverse Motor 2 forward Signals motor 1 to move Signals motor 1 to move Initiates various functions Signals motor 2 to move Signals motor 2 to move EB2 N - Hardwired Network Motor Controller

INFORMATION SHEET - Climate Ready EB4 D - Hardwired Dynamic Motor Controller Power input Hardwired to internal 3 conductor (2+ ground) 14 AWG max Motor output 4 Hardwired to internal 4 conductor (3+ ground) 14 AWG max Network 2 Screw terminal CAT 6 Digital inputs 5 Screw terminal CAT 6 Controller Climate Ready EB4 D Product Information and installation The Climate Ready EB4 D is a quad motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Apart from Horiso Smart Motor Control software (basic), the EB4 D is unique with software that is shading specific ST[a]ARS (for roller blinds) and ST[a]ATS (for venetian blinds and louvers). It allows a highly precise adjustment to the shading system according to an astrophysical Solar Path Calculus. In addition to controlling 4 motors, each controller is capable of accepting 10 dry contacts or 5 switches. Optional Control Point modules allow for the addition of sensors and A/V system integration. The Climate Ready EB4 D Motor Controller can operate stand-alone, networked and / or dynamic using BACnet MS/TP. The Climate Ready EB4 D Motor Controller positions facade element/s based on input from: Users - wall switches or a Building Manager Software. Solar Path Calculus with FIM (Facade Intelligence Modelling) - solar tracking based on building location, distance, height and facade orientation. Sensors - including sun, wind, temperature and occupancy. BMS or A/V Systems - BACnet MS/TP, Modbus RTU or dry contact. Universal Serial Bus Micro USB connector Standard USB adaptor cable Internal No activity on the network Switches Yellow Solid: A dry contact is currently closed Status light is red, switches will control on motors, otherwise switches are disabled Up Technical data Supply voltage 110-240 VAC at 50 / 60 Hz (power lead with Australian plug) Dimensions Length - 210 mm / Width - 130 mm / Height - 80 mm Output 4 x 240 VAC max. 3A (4 core cable with inline connector) Data Network BACnet MS/TP at max. 115,200 bps - (max. 127 devices per segment) Down Bind Net Function N/A Select motor channel. Environmental USB Connection Switch connection Power connection 0-55 C at 0-95% RH (non-condensing) Micro USB connection for data connection and USB switch expansion 3-pin Phoenix screw terminal Wired supply cable with Australian plug. EB4 D - Hardwired Dynamic Motor Controller

INFORMATION SHEET - Climate Ready EB4 N - Hardwired Network Motor Controller Power input Hardwired to internal 3 conductor (2+ ground) 14 AWG max Motor output 4 Hardwired to internal 4 conductor (3+ ground) 14 AWG max Network 2 Screw terminal CAT 6 Digital inputs 5 Screw terminal CAT 6 Controller Climate Ready EB4 N Product Information and installation The Climate Ready EB4 N is a quad motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Included is a basic software package the Horiso Smart Motor Control that provides safety soft limits (prevents damage if motor limits fail). Precise facade element/s adjustment in angle degree or mm for facade uniformity, preset stops, programmable parameters and basic scheduling. In addition to controlling 4 motors, each controller is capable of accepting 10 dry contacts or 5 switches. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The Climate Ready EB4 N Motor Controller can operate stand-alone or networked using BACnet MS/TP. The Climate Ready EB4 N Motor Controller positions facade elements/s based on input from: Users - wall switches or a Building Manager Software. Sensors - including sun, wind, temperature and occupancy. BMS or A/V Systems - BACnet MS/TP, Modbus RTU or dry contact. Universal Serial Bus Micro USB connector Standard USB adaptor cable Internal No activity on the network Switches Yellow Solid: A dry contact is currently closed Status light is red, switches will control on motors, otherwise switches are disabled Technical data Supply voltage 110-240 VAC at 50 / 60 Hz (power lead with Australian plug) Dimensions Length - 210 mm / Width - 130 mm / Height - 80 mm Output 4 x 240 VAC max. 3A (4 core cable with inline connector) Data Network BACnet MS/TP at max. 115,200 bps - (max. 127 devices per segment) Environmental 0-55 C at 0-95% RH (non-condensing) USB Connection Micro USB connection for data connection and USB switch expansion Switch connection 3-pin Phoenix screw terminal Power connection Wired supply cable with Australian plug. Up Down Bind Net Function N/A Select motor channel. EB4 N - Hardwired Network Motor Controller

INFORMATION SHEET - Climate Ready Control Point Analog inputs Network 1-2 Screw terminal CAT 6 Digital outputs 1-3 Screw terminal CAT 6 status serial network Analog inputs 1-5 Screw terminal CAT 6 Universal Serial Bus Macro USB connector Standard USB adaptor cable Digital outputs USB connection Network Control Point Climate Ready Control Point Product Information and installation The Climate Ready Control Point is a multi functional data point which allows the integration of analog signals, RS 232 communication and provides digital outputs. The Control Point is used to connect analog sensors to the system and offers A/V system integration utilising dry contact outputs or the open RS 232 interface. The Climate Ready Control Point is networked using BACnet MS/TP. Integration of sensors - including sun, wind, temperature and occupancy. No activity on the network Serial interface Yellow RS 232 network traffic Technical data Supply voltage 24 VDC 1.5A Dimensions Length - 180 mm / Width - 90 mm / Height - 30 mm Output 6 x Dry Contacts Input (normally open, momentary or latched) Analog input 4 x 0 10 VDC and 1 x 0 20mA Interface RS 232 Data Network BACnet MS/TP at max. 115,200 bps - (max. 127 devices per segment) Environmental 0-55 C at 0-95% RH (non-condensing) USB Connection Micro USB connection for data connection and USB switch expansion Switch connection 3-pin degson screw terminal Available configuration CP BACnet MS/TP + AI + RS 232 CP-Z CP-R CP-RZ CP + ZigBee PRO CP + Ethernet router CP-R + ZigBee PRO Arrow up Arrow down Cross Tick Browse through functions Browse through functions Leave function Confirm function Control Point

INFORMATION SHEET - EZ ZigBee PRO Repeater INFORMATION SHEET - DCI 6 /12 - Digital Port Expansion Unit USB connection Digital inputs EZ ZigBee PRO Micro USB Product Information and installation Repeater connection Digital port 6 or 12 Product Information and installation Expansion Unit Contact closures ZigBee protocol creates a reliable and expandable wireless mesh communication between controllers, Control Points and switches. The EZ Repeater extends an EZ network or brings wireless devices into EB network. It allows integration with EB controllers, or connects to a standard USB power supply to operate as a standalone repeater. The DCI connects to all Horiso Climate Ready control components via Micro USB and adds digital input ports (DI) to the system. The contacts are dry contacts which can be connected to either switches or relay contacts (for low level integration to third-party systems). The configuration is either 6 DI (DCI 6) or 12 DI (DCI 2) which can provide either 3 or 6 2-gang switch groups. Technical data Supply voltage 5 VDC Input Powered through USB Dimensions Length - 120 mm / Width - 79 mm / Height - 27 mm Communication ZigBee Pro WiFi Environmental 0-55 C at 0-95 % RH (non-condensing) Technical data Supply voltage 12 VDC (Internal via USB) Input Phoenix pluggable screw terminal connector Dimensions Length - 78 mm / Width - 53 mm / Height - 22 mm Environmental 0-55 C at 0-95 % RH (non-condensing) EZ ZigBee PRO Repeater DC1 6/12 - Digital Port Expansion Unit

Hardware EZ1 D Controller The Climate Ready EZ1 D Controller is a single wireless motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Each controller is capable of accepting twelve dry contact inputs (utilising a DCI - Digital Port Expansion). Optional Control Point modules allow for the addition of sensors and audio visual system integration. The EZ1 D Controller can operate stand-alone, networked and / or dynamic using wireless BACnet over ZigBee PRO. Basic software - Horiso Smart Motor Control. Additional software - ST[a]ARS (for roller blinds) and ST[a]ATS (for venetian blinds and louvres). A unique shading specific software provides a highly precise adjustment to the shading system according to an astrophysical Solar Path Calculus. EZ1 N Controller The Climate Ready EZ1 N Controller is a single wireless motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Each controller is capable of accepting twelve dry contact inputs (utilising a DCI - Digital Port Expansion). Optional Control Point modules allow for the addition of sensors and audio visual system integration. The EZ1 N Controller can operate stand-alone or networked using wireless BACnet over ZigBee PRO. Basic software - Horiso Smart Motor Control. EB2 D Controller The Climate Ready EB2 D Controller is a two motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Each controller is capable of accepting six dry contact inputs. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The EB2 D Controller can operate stand-alone, networked and / or dynamic using BACnet MS/TP. Basic software - Horiso Smart Motor Control. Additional software - ST[a]ARS (for roller blinds) and ST[a]ATS (for venetian blinds and louvres). A unique shading specific software provides a highly precise adjustment to the shading system according to an astrophysical Solar Path Calculus. EB2 N Controller The Climate Ready EB2 N Controller is a two motor controller that operates facade element/s for eg. shading systems, ventilation systems and other motorised systems. Each controller is capable of accepting six dry contact inputs. Optional Control Point modules allow for the addition of sensors and audio visual system integration. The EB2 N Controller can operate stand-alone or networked using BACnet MS/TP. Basic software - Horiso Smart Motor Control. CP (Control Point) The Control Point is a multi-functional data point that allows integration of analog signals, RS 232 communication and provides digital outputs. The Control Point is used to connect analog sensors to the system and offers audio visual system and home automation integration utilising dry contact outputs or the open RS 232 interface. The Control Point is networked using BACnet MS/TP. CP-Z (Control Point ZigBee PRO) The ZigBee Control Point has all functionality of the CP Control Point including a ZigBee PRO gateway. CP-R (Control Point Router) The Control Point Router is a multi-functional data point with ethernet connectivity (Router functionality) through the backbone. It allows integration of analog signals, RS 232 communication and provides digital outputs. The Control Point Router is used to connect analog sensors to the system and offers audio visual system and home automation integration utilising dry contact outputs or the open RS 232 interface. The Control Point Router is networked using BACnet MS/TP. The CP-R can be installed inside a cabinet which allows the RJ45 connectors into the horizontal BACnet and the vertical ethernet. The cabinet has also two GPO for the router and a service power point - if required. CP-RZ (Control Point Router ZigBee PRO) The ZigBee Control Point has all functionality of the CP-R Control Point Router including a ZigBee PRO gateway. EZ ZigBee PRO Repeater The EZ Repeater extends an EZ network or brings wireless devices into an EB network. It allows integration with EB controllers, or connects to a standard USB power supply to operate as a standalone repeater. ZigBee protocol creates a reliable and expandable wireless mesh communication between controllers, Control Points and switches. DCI 6 / 12 (Digital Port Expansion Unit) The DC1 is available as a 6 or 12 dry contact input expansion unit. It enables control of additional sensors from 6 to 12 for shading product control via a micro USB. Ethernet network The vertical backbone is running off un-managed Ethernet network switches which are located inside the BACnet router cabinet on designated floors. Analog brightness sensor The brightness sensor is adapted to the sensitivity of the human eye. The measuring values are transmitted as analogue signals with a proportional voltage range of 0-10 VDC. The sensor achieves an almost direction-independent sensibility range of 0-90 in elevation and 0-360 in azimuth. Analog wind sensor The wind sensor collects the speed and wind direction from the mounting point of the sensor s position. The measuring values are transmitted as analogue signals with a proportional voltage range of 0-10 VDC. Weather Station (hardwired or ZigBee - digital) The Digital Sensor Kit is a low cost combination sensor which senses light and wind conditions at the installed location. Thresholds for respective light and wind levels can be set, as well as a delay time to return to auto operation. The values are represented by a digital value (not real physical value) which can be programmed by the user. If the light levels exceed the pre-set value, the shades are in Auto Mode, below the value the shades are retracted. If the wind threshold is exceeded the shades retract and are set back to auto once the wind has calmed down. No dynamic wind or brightness response profile can be used in conjunction with this sensor type. Building automation system integration The motor controller will automatically operate the actuator system in response to the use of devices such as audio visual, air conditioning, lighting and security. BMS (Building Management System) and audio visual system integration The motor controller Low-Level BMS Integration such as air conditioning, audio visual and other sub-system integrations require dry-contact connection to the motorised system receiving and sending signals which can be individually programmed to suit the required needs. Summary of terms

Alternately to lower costs, this interface can be realised by using the Standard Serial Interface RS 232 to connect with automation systems such as C-BUS (command exchange using ASCII codes). Horiso Smart Switch Is a wireless 7-channel momentary push button switch, flush mounted or surface mounted version. It provides access for an individual user to override the motor operation. Bluetooth Adaptor Is an adaptor to enable direct connection with other compatible Bluetooth devices such as iphones, ipads etc for the operation of shading products, known as via Smart Remote Control. Basic application server This control server is based on a standard desktop medium performance server. The system platform is Microsoft Windows 7 Professional and Sun Java for the shading application. The system includes a single TeamViewer remote access license for remote servicing and access to the BM Control Panel. All control server software products are HTML based and can be accessed from any external PC, (iphone, ipad, tablet, smart phone etc) which is running an internet browser and has access to internet. Advanced application server This control server is based on a super Micro i7 industrial standard server which can be rack mounted into a standard 19 server rack. The system platform is Microsoft Windows 7 Professional and Sun Java for the control application. The system includes a TeamViewer remote access license for remote servicing and access to the BM Control Panel. All control server software products are HTML based and can be accessed from any external PC or device (tablet, smart phone, etc) which is running an internet browser and has access to the internet. Software Horiso Smart Motor Control The Horiso Smart Motor Control software is a basic software package and provides safety soft limits (prevents damage if motor limits fail). It enables precise facade element/s adjustment in angle degree or mm for facade uniformity, preset stops, programmable parameters and basic scheduling. Horiso Smart Remote App - residential A Web App enabling the integration of Iphone, Ipad and tablets utilising standard Bluetooth connectivity to operate an individual facade element or facade element groups eg. bedrooms, entertainment room, kitchen, office etc. Customised solutions: easy programmable. Dynamic Brightness Response An intelligent response to scalable brightness values (such as solar glare). Individual facade element banks on different levels / angles at varying times will respond to the degree of solar glare. Dynamic Wind Response An intelligent response to scalable pressure values of wind on the facade element/s. Individual facade element banks on different levels / angles will respond appropriately to differing wind pressure. ST[a]ATS ST[a]ATS (solar tracking automatic tilt synchronisation). This response is a highly precise adjustment to the shading system and is dependent upon the input from the solar path calculus, including Facade Intelligence Modelling options (FIM) and ECO-Mode. ST[a]ARS ST[a]ARS (solar tracking automatic roller synchronisation). This response is a highly precise adjustment to the shading system and is dependent upon the input from the solar path calculus, including Facade Intelligence Modelling options (FIM) and ECO-Mode. Horiso Smart Shading Server - residential Is a single user wireless control application that can be installed onto every control point installation, CP, CP-R and CP-Z and permits a direct connection to a WiFi modem network (if existing), or a standard Ethernet WiFi switch. It provides remote access to operate facade element/s via hand held devices such as ipads, iphones, and other smart phones and tablets. ECO-Mode Eco-Mode enables the facade element/s to preserve the inside temperature of the building by extending the facade element/s over night and utilising solar radiation as an energy source during the day (winter mode). Eco-Mode will: Integrate outside temperatures. Restrict manual override if air conditioning is in cooling mode. Facade element/s close or open if temperature is below set point. Facade element/s retract to harvest solar energy if air conditioning is in heating mode. This mode is triggered by an external temperature sensor (optional), a schedule, or by communication with the air conditioning system. BACnet The internationally acknowledged BACnet is a communications protocol for building automation and control networks. It provides access to information from devices such as air conditioning, lighting and security. BM Control Panel (Building Manager) The BM Control Panel software is installed on the local server for the building manager to operate all facade elements in the building. The BM Control Panel software allows access to information such as facade element status, facade element admin override, various scheduling functions, alert email and data logging. All functions are accessed on the Administration Level. FM Control Panel (Facility Manager) The FM control panel software is an additional licence installed on the local server for the building s tenant/s. It enables the operation or override access to facade element/s on tenancy level or per floor. All functions are accessed on User Levels. Horiso Smart Remote App - commercial A Web App enabling the integration of iphone, ipad and tablets utilising standard WIFi / internet connectivity to operate facade element/s. Customised solutions: easy programmable. GUI (Graphic User Interface) The GUI is a standalone application which runs on the Advanced Control Server platform and offers the same basic functionality as the BM Control Panel. Major difference is that the control access diagram is shown as a reflected floor plan with motor / facade element relative to the building structure. FIM (Facade Intelligence Modeling) FIM modules are based on 3D modeling of a building s surroundings including adjoining building location, distance and height into consideration. The model is stored in the memory of the related controller and provides calculation input in conjunction with the Solar Path Calculus for the facade element/s adjustment. The FIM modules cater for over-shadowing, indirect (or reflected) glare and internal glare zones (within the floor space). Summary of terms

engineering@horiso.com.au www.horiso.com.au