Wrenches for hub cover extraction. Wrenches for hub cover and trailer nuts Axle nut disassembly Axle models KÄSSBOHRER/SETRA: front axle 6.5 and 7.5t in types S 210 and 215, SG 219-221 and dead axle types S 216 HDS and S 228 DT types 0303, 0305-G and 0307 Axle models DAF, Mercedes: VL 3/8, 4/7, 4/9, 4/15, VD 4/14, Wrench for stud nut Front axle models: SK VL5/1 D9-2629 in 6x4. 2635 in 6x4. 3535K 8x4 Specific for MERCEDES, MAN of type 363, 385, 387, 389, 391, 393, 395, 617, 620, 621, 622, 623, 625, 649 Axle models Mercedes - Bus: VO 3/10, 4/11, 4/13 and 4/19 in types 0303, 0305-G and 0307 56x71 mm - 60x76 mm - KÄSSBOHRER/SETRA ideal for Bus for models KÄSSBOHRER/ SETRA, MERCEDES and MAN 66 Ø 68 49 49.5 523 018 000 71 56 523 019 000 76 60
Wrenches for hub cover extraction. Wrenches for hub covers Loosen the outer cap of the axle inner Ø 90 mm - Specific for BPW 9TN Wrenches for hub covers Loosen the outer cap of the axle inner Ø 74 mm - Specific for BPW 12TN ideal for Trailers for BPW models BPW 523 020 000 60 95 Ø 116 523 021 000 50 Ø 100 Ø 100 50 Ø 90 Ø 74
Wrenches for hub cover extraction. Dual use wrenches for hub covers and trailer nuts Trailer axle cover and nut disassembly Specific for FRUEHAUF Ø 123 mm hexagon 110 mm 123 FRUEHAUF ideal for Trailers for FRUEHAUF models 123 80 Ø 20 123 523 017 000 Ø 154 110
Wrenches for for hubs hubs Wrenches for hub nuts extraction. Octagonal wrench for trainer nut Trailer axle nut disassembly Specific for R.O.R Octagonal wrench for trainer nut Loosen the inner nut of the trailer axle Specific for R.O.R octagon 127 mm Ø 126 mm octagon 84 mm Ø 83 mm R.O.R 523 012 000 Ø 90 115 127 Ø 20 Ø 74 ideal for Trailers for R.O.R models Ø 98 Ø 148 Ø 126 523 016 000 125 84 Ø 83
Wrenches for for hubs hubs Wrenches for hub cover extraction. Hexagonal wrench for trailer hub covers Trailer axle nut disassembly hexagon 160 mm - Specific for FONTENAC RENAULT Hexagonal wrench for trailer hub covers Trailer axle nut disassembly hexagon 140 mm - Specific for S.A.F. RENAULT ideal for Trailers for RENAULT models 523 006 000 62 160 Ø 193 523 007 000 40 140 Ø 172
Round sockets and wrenches for hubs. Toothed wrench for front axle Front reduction hypoid axle nut disassembly Front axle models: VW2 - VW4 - VW6.1-6.8 6-teeth wrench for front axle Axle nut disassembly Front axle models: M3 - ME - MI Rear axle modelswith outer planetary unit: Hexagonal wrench for trailer hub covers Trailer axle nut disassembly Specific for FONTENAC RENAULT 6-teeth wrench Loosen the nut of the rear axle Rear axle models: TGA Specific for MERCEDES, MAN 6-teeth wrench Loosen the nut of the front axle with disc brakes and ABS Front axle models: TGA V9-82L - 01 6 teeth - tooth width 10 mm - inner Ø 77 mm - 3MR - 5MR 6 teeth - tooth width 13 mm - inner Ø 76,5 mm - 3/4 hexagon 160 mm - 6 teeth - tooth width 11,5 mm - inner Ø 117 mm - 6 teeth - tooth width 8 mm - inner Ø 92,5 mm - MAN ideal for Truck and Bus for MAN models 100 3/4 Ø 87 Ø 84 Ø 193 523 003 000 523 005 000 523 006 000 523 009 000 100 11.5 Ø 116 Ø 146 95 62 98 10 Ø 77 Ø 117 523 010 000 8 13 160 Ø 76,5 Ø 92.5
Wrench for stud nut Front axle models: SK VL5/1 D9-2629 in 6x4. 2635 in 6x4. 3535K 8x4 Specific for MERCEDES, MAN 6-teeth wrench for front axle - BUS Front reduction hypoid axle nut disassembly Low-platform bus with gantry axle HDNP-1300 Specific for MAN BUS 60x76 mm - 6 teeth - tooth width 10 mm - inner Ø 110 mm - Ø 68 Ø 120 49.5 75 523 019 000 76 60 523 024 000 10 Ø 110
Round sockets and wrenches for hubs. Dual use toothed wrench for nuts Rear axle models: 10TN/13TN - HL7/1 - HL7/2 - HL7/18 - HO7/8 - H07/9 - HL7/0 - HL7/015 - HL/021 - HL7/3 - HD7/2 -HD7/19DG - HD7/016DG Front axle models: 7TN AL7/1 6-teeth wrench for rear axle Rear reduction hypoid axle nut disassembly Rear axle models: HL2/2 - HL2/7 - HL2/13 6-teeth wrench Wrench for dismounting the nut of the trailer balancing axle and the pinion Axle models: NS4/2 - NS4/10 6-teeth wrench Loosen the nut of the rear axle Rear axle models: TGA Specific for MERCEDES, MAN 6-teeth wrench Loosen the toothed nut Specific for MERCEDES ATEGO 12 teeth - tooth width 10 mm - inner Ø 102 mm 6 teeth - tooth width 10 mm - inner Ø 99 mm 6 teeth - tooth width 10,9 mm - inner Ø 71,5 mm - 3/4 Pinion axle models: HL6/1 - HL6/2 - HL6/3- HD6/3 6 teeth - tooth width 9,8 mm - inner Ø 113 mm - 6 teeth - tooth width 11,5 mm - inner Ø 117 mm - 6 teeth - tooth width 7,5 mm - inner Ø 101 mm - Ø 99 3/4 MERCEDES ideal for Truck for MERCEDES models 10 Ø 82 Ø 122 Ø 116 523 001 000 523 002 000 523 004 000 523 009 000 100 11.5 Ø 126 Ø 146 142.5 10 Ø 102 110 119.5 100 10.9 9.8 Ø 71.5 Ø 113 Ø 117 523 011 000 7.5 Ø101
12-teeth wrench for rear axle Loosen the nut of the rear axle BRG year 2001 Specific for MERCEDES ACTROS 1840 6-teeth wrench for rear axle Wrench for dismounting reductionhypod axle nut Rear axle models: HL2/14 - HL2/30 - KL2/16 - KL4/1 - KL4/16 - KL4/17 - KL4/23 - KL4/28 - KL4/29 - KL4/4 - KL4/8 - KD4/6G - HO4/2 - HO4/18 - NR4/4 Wrenches for hub covers - BUS Axle models DAF, Mercedes: VL 3/8, 4/7, 4/9, 4/15, VD 4/14, of type 363, 385, 387, 389, 391, 393, 395, 617, 620, 621, 622, 623, 625, 649 Wrench for stud nut Front axle models: SK VL5/1 D9-2629 in 6x4. 2635 in 6x4. 3535K 8x4 Specific for MERCEDES, MAN Wrench for hexagonal nut Rear axle Trailer axle Axle with compact bearings 12 teeth - tooth width 8 mm - inner Ø 90 mm - Front axle models: AL3/1 - AL3/2 - AL3/3 - AL3/4 - AL3/7 - AL3/8 6 teeth - tooth width 10 mm - inner Ø 75 mm - 3/4 Axle models Mercedes - Bus: VO 3/10, 4/11, 4/13 and 4/19 in types 0303, 0305-G and 0307 56x71 mm - 60x76 mm - Hexagonal nut 95 mm - 3/4 Ø 118 Ø 84 Ø 68 66 Ø 97 70 70 49 49.5 118 523 013 000 8 Ø 90 523 014 000 10 Ø 75 523 018 000 71 56 523 019 000 76 60 523 023 000 95
Wrenches for hub locknuts. Toothed wrench for locknut Rear axle 4 teeth - tooth width 7,6 mm - inner Ø 91 mm - ideal for Truck for SCANIA models 523 015 000 131 7.6 1 Ø 116 SCANIA 91
Polygonal wrench for hubs. Polygonal wrench Axle nut disassembly Polygon 85 mm - inner Ø 83 mm - ideal for Commercial vehicles for IVECO models Ø 108 50 IVECO 523 008 000 85 Ø 83
6-teeth wrench for hub locknut. 6-teeth wrench for rear axle Pinion nut disassembly Rear axle models: VARIO 814 - SPRINTER 616 - AT- EGO HL2/43 DG 6.2 6-teeth wrench Loosen the nut of the rear reduction hypoid axle Rear axle models: HL0/3 - HL0/6 - HL0/7 - HL1/2 - HL1/3 - HL1/8 - HL1/9 - HL2/2 - HL2/3 - HL2/5 HL2/9 - HL2/11 - HL2/12 - HL2/15 6 teeth - tooth width 11 mm - inner Ø 88 mm - Specific for MERCEDES SPRINTER - 412T - VW - LT 6 teeth - tooth width 7.5 mm - inner Ø 63 mm - 1/2 MERCEDES ideal for Commercial vehicles for MERCEDES models 100 Ø 95 111 1/2 Ø 42 Ø 76 521 001 000 11 523 022 000 7.5 Ø 88 Ø 63
Via degli Orsi, n. 97 40014 Loc. Beni Comunali Crevalcore(BO)Italy Tel:+39.051.982688 Tel:+39.051.980798 Fax:+39.051.6801371 E-mail:info@govoni.it Web:www.govoni.it