ISO CERTIFICATION AIR & BRAKE CAB & BODY SWITCHES. Search Online _

Transcription

1

2 ISO CERTIFICATION S&S Truck Parts, Inc is certified as an ISO 9001:2008 compliant organization. The certification is accredited by Perry Johnson Registrars (PJR). The certification of compliance with ISO 9001:2008 recognizes that the policies, practices and procedures of our company ensure consistent quality in the product and services we provide our clients. With this certification, our clients can be confident that S&S Truck Parts, Inc is dedicated to maintaining the highest efficiency and responsiveness in achieving our ultimate goal guaranteed client satisfaction. TRADEMARK ACKNOWLEDGMENTS S & S Truck Parts, Inc. / NEWSTAR use of the names of original manufacturers, their models, types, part numbers and other descriptive product information is only for the purpose of aiding customers in cross-referencing to the appropriate S & S / NEWSTAR part. The following is a listing, compiled to the best of our knowledge, of Trademarks used in this catalog for the aforementioned purpose. Freightliner is a trademark of Freightliner Corp. Freightliner Alliance is a trademark of Freightliner Corp. International is a trademark of Navistar International Corp. Kenworth is a trademark of Paccar Inc. Mack is a trademark of Mack Trucks, Inc. Peterbilt is a trademark of Paccar, Inc. Volvo is a trademark of Volvo Group AIR & BRAKE CAB & BODY SWITCHES INTERNATIONAL MACK PETERBILT VOLVO See our full line of available catalogs online at Search Online _

3 FREIGHTLINER 4 ART TANDEM FORWARD & REAR 4 ART 400-R TANDEM REAR CARRIER ASSEMBLY 6 ARS-2 SINGLE AXLE 8 MISC. COMPONENTS 10 FRONT TANDEM AXLE BEARING KIT 10 REAR TANDEM AXLE BEARING KIT 11 PINION BEARING SETS 12 Want to order by phone? Contact your salesperson at S&S Truck parts Inc

4 Tandem Forward Carrier Assembly ART 400-4F Rear View 13 22/23A A A 24B 14 6 Illustration # Newstar # Replaces Description Application 1 S MBA Half Support Case 5 S Gear Set 41:12 Ratio S Gear Set 43:12 Ratio S Gear Set 43:11 Ratio S MBA Pinion Nut M45X1 Search Online _

5 Tandem Forward Carrier Assembly Illustration # Newstar # Replaces Description Application 6A S MBA Pinion Nut M45X1 7 S Pinion Drive Gear 35 T./41 SPL. (2008 & Before) 7 S Pinion Drive Gear 35 T./41 SPL. (2009 & Up) 8 S S S MBA Helical Drive Gear 35/14/16 T. Helical Drive Gear 35/12/16 T. Oil Baffle Works w/ S & S Helical Drive Gears (2008 & Before) (2009 & Up) 10 S Sliding Clutch 35/14 T. (2008 & Before) 10 S Sliding Clutch 35/12 T. (2009 & Up) 11 S Input Shaft 12 S S S-5028 Inter Axle Cross & Pinion Kit Does Not Include Washers Inter Axle Cross & Pinion Kit Does Not Include Washers (2008 & Before) (2009 & Up) 13 S Side Gear 16 T./36 SPL. (2008 & Before) 13 S Side Gear 16 T./36 SPL. (2009 & Up) 14 S S MBA K Main Differential Gear Kit 46 Spline 2.38" Diameter w/ Diff Lock Main Differential Gear Kit 41 Spline 2.10" Diameter w/ Diff Lock 15 S TDA 32017X Differential Bearing, LH 16 S TDA 32022X Differential Bearing, RH 17 S Clutch Collar Fork 20 S MBA K Bearing Cone, Rear 19 S MBA Bearing Cup, Rear 21 S MBA Output Seal Early & Late Forward Models 22 S K75X83X23A Needle Bearing Early & Late Forward Models 23 S AXK1116 Thrust Bearing Early & Late Forward Models 22/23A S MBA K Thrust Bearing Kit Consists of 1 S & 2 S A S Pinion Bearing Head 24B S Pinion Bearing Tail Not Pictured S MBA Pinion Seal Rear Model Not Pictured S TDA JM Bearing Cone Early & Late Forward Models Not Pictured S-D995 TDA 3920 Bearing Cup Early & Late Forward Models Not Pictured S MBA Input Seal Early & Late Forward Models Not Pictured S MBA Not Pictured S MBA S MBA Axle Shaft 2.10" - 41 Spline, 38.44" Long Axle Shaft 2.10" - 41 Spline, 43.50" Long Clutch Collar Diff Lock 10 T./46 SPL. 25 S Clutch Collar Diff Lock 12 T./46 SPL. (2009 & Up) 26 S S Pinion Thrust Washer Part of S Diff Kit Side Thrust Washer Part of S Diff Kit Forward, Rear & Single Models (2008 & Before) 28 S S-5006 Spider Cross Early & Late Models ART 400-4F Want to order by phone? Contact your salesperson at S&S Truck parts Inc

6 Tandem Rear Carrier Assembly ART-400-R Search Online _

7 Tandem Rear Carrier Assembly Illustration # Newstar # Replaces Description Application 1 S Half Housing 2 S Nest Kit 3 S MBA Pinion Nut 4 S Pinion Washer 5 S MBA Side Gear Washer 6 S Gear Set 41:12 Ratio S Gear Set 43:12 Ratio S Gear Set 43:11 Ratio S MBA Pinion Seal Not Pictured S Bearing & Seal Kit ART-400-R Want to order by phone? Contact your salesperson at S&S Truck parts Inc

8 Single Axle ARS Search Online _

9 Single Axle Illustration # Newstar # Replaces Description Application 1 S Half Housing 2 S Differential Gear Kit HL 2 ARS-2 3 S MBA Nut M40X1.5 4 S Pinion Washer 5 S MBA Side Gear Washer 6 S Gear Set 43:11 Ratio S Gear Set 41:10 Ratio S Gear Set 43:10 Ratio S Gear Set 41:9 Ratio S Gear Set 43:9 Ratio S Gear Set 41:8 Ratio S Gear Set 40:7 Ratio S Gear Set 43:7 Ratio 6.14 Want to order by phone? Contact your salesperson at S&S Truck parts Inc

10 Pinion Bearing Sets FRONT TANDEM AXLE BEARING KIT S AXLE COMPONENTS Newstar # Replaces Description Application S CONSISTS OF 1 EACH: DRK-650F RA650F Newstar # Replaces Description S-D995 TDA 3920 Bearing Cup S TDA 32017X Metric Bearing Set S TDA 32022X Metric Bearing Set S Inner Pinion Bearing Set S Outer Pinion Bearing Set S-7667 RTV Gasket Eliminator S MBA K Bearing S MBA Bearing S TDA JLM Bearing S MBA Input Seal S MBA Output Seal S AXK1116 Thrust Bearing Front Tandem Axle Bearing Kit ART S K75X83X23 Caged Needle Bearing Search Online _

11 Pinion Bearing Sets REAR TANDEM AXLE BEARING KIT S AXLE COMPONENTS Newstar # Replaces Description Application S CONSISTS OF 1 EACH: DRK-650R RA650R Newstar # Replaces Description S MBA Pinion Seal S TDA 32017X Metric Bearing Set S TDA 32022X Metric Bearing Set S-7667 RTV Gasket Eliminator S Pinion Bearing Set S Pinion Bearing Set Rear Tandem Axle Bearing Kit ART Want to order by phone? Contact your salesperson at S&S Truck parts Inc

12 Pinion Bearing Sets AXLE COMPONENTS INNER PINION BEARING S Replaces Front & Rear Tandem OUTER PINION BEARING S Replaces Front & Rear Tandem Search Online _

13 Pinion Bearing Notes Sets AXLE COMPONENTS VISIT TO BROWSE OUR COMPLETE INVENTORY. Want to order by phone? Contact your salesperson at S&S Truck parts Inc

14 Notes Search Online _

15 Notes Want to order by phone? Contact your salesperson at S&S Truck parts Inc

16 Notes Search Online _

17 Notes Want to order by phone? Contact your salesperson at S&S Truck parts Inc

18 COMMITTED TO QUALITY At S&S Truck Parts Inc., our commitment to quality extends from our manufacturing process to our Quality Control Laboratory (QCL). The QCL located at our Corporate Headquarters in Schaumburg, Illinois contains the most advanced and sophisticated quality inspection equipment to ensure that GENUINE NEWSTAR components meet the industry s most stringent quality standards. STATE OF THE ART TESTING Klingelnberg-Hofler CNC (Computer Numeric Controlled) Checks all gear tooth dimensions to insure teeth are made correctly Starrett CMM (Coordinate Measuring Machine) For checking lengths, locations, concentricity of diameters, flatness, and more Starrett CNC Optical Comparator For visual checks of forms, radius, lengths, heights, and more Gleason Universal Gear Tester Functional rolling machine for testing gear sets Mitutoyo HR-500 Rockwell Hardness Measures Rockwell hardness of various metals and other materials in thirty different hardness scales Custom Engineered Fixtures Enable testing to original specs for pop-off, pressure differential, and crack pressures as required by part number on all air valves Search Online _

19 S&S WARRANTY All Replacement Freightliner Components covered in this catalog are warranted for one (1) year / 100,000 miles from installation, or 18 months after purchase from S & S Truck Parts, Inc., whichever comes first. We warrant all new parts against defective material or workmanship when such parts are used in appropriate applications. We will NOT extend this warranty to parts where failure or damage was caused by misapplication, accident, or abuse. Unless otherwise stated, authorization from your salesperson is required to initiate any return for warranty. If our examination shows the parts to be defective, we will replace such parts free of charge. This warranty extends solely to replacement of defective parts; we disclaim liability for labor and/or special or consequential damages of any nature. If it is necessary to return any parts under this warranty, the buyer agrees to wait for settlement of his claim before any deductions are made in payment to S&S. Any expenses incurred without the consent of S & S will be disallowed. Want to order by phone? Contact your salesperson at S&S Truck parts Inc

20