INDUSTRIAL PRINTING AND LABELING SYSTEMS ASI offers a number innovative solutions to meet the demands for high performance and reliability in the industrial and manufacturing sectors. HIGH SPEED THERMAL PRINTERS The patented MARKINGenius is a high speed desktop printer that can produce labels up to 15 times faster than a traditional pen plotter system. It uses thermal transfer technology to produce labels for terminal blocks, wires and cables, panel switches and pilot lights, name plates and complex equipment labels. The MARKINGenius can print black or over 4000 colors and does so without the maintenance and set-up problems associated with ink and pens. The high resolution printing can even print logos, drawings and clipart images down to very small dimensions. The clean noise free operation permits use in office environment. The Rolly 1000 is a very high speed thermal printer that prints on inexpensive reel labels for all types of industrial applications. With a high quality resolution of 300 dpi, the Rolly 1000 can print over 130,000 wire marker tags with just one ribbon at a rate of 1000 tags in less than two minutes. Ribbons are available in black and several other colors and the fact that the Rolly 1000 operates quietly and without pens or ink makes it ideal for use in any office environment. PEN PLOTTER The classical, inexpensive ink-pen plotter system has been used reliably in industrial applications for many years. The plotter system is ideal for small quantity print jobs and for use in the shop where you can maintain operation and print labels for terminal blocks, wire and cables markers, panel switches and pilot lights, name plates and labels. The user friendly Plot Advance software is Windows based and has several design and processing tools which help customers meet all print job requirements. Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
Table of Contents MARKINGenius Page PLOT SYSTEM Page Thermal Transfer Printing System 2 Hardware, Software and Accessories 4 MG-TPMF, Wire and Cable Markers 6 MG-TPM, Wire and Cable Markers 6 MG-TDMF, Wire and Cable Markers 7 MG-ETF, Cable and Conduit Markers 7 MG-KMP, Adhesive Wraparound Wire Markers 8 MG-CPM, Terminal Block Markers 9 MG-CPMF, Flat Strip Terminal Block Markers 10 STF, Flat Terminal Marker Bracket 10 MG-CPMF, Flat Strip Terminal Block Markers 11 MG-VYB, Adhesive Terminal Block Labels 11 MG-TAP, Cable and Component Legends 12 MG-TAPW, Cable and Component Legends 12 MG-TAA, Adhesive Cable and Component Legends 13 MG-VYT, Adhesive Component Labels 13 MG-PYT, Adhesive Component Labels 14 MG-PTS, Push Button Legends 15 MG-PLC, PLC Legends 15 MG-VRT-A, Adhesive Marker Plates 16 ROLLY 1000 Page Thermal Transfer Printing System for Reel Media 17 TPS-060, Ribbons 18 TPM-ROLL, Wire and Cable Makers 19 KM-ROLL, Adhesive Wraparound Wire Markers 20 TTL, Adhesive Labels 21 Plotter Printing System 22 Hardware, Software 23 Accessories 24 Plotter Support Templates 25 TPM, Wire and Cable Markers 26 TDM, Wire and Cable Markers 26 CPM, Terminal Block Markers 27 CPM-S, Strip Terminal Block Markers 28 CMSC, Wire and Cable Markers 28 SPM, Component Markers 29 NPM, Connector Markers 29 TAP, Cable and Component Legends 30 TAPW, Cable and Component Legends 30 TAA, Adhesive Cable and Component Legends 30 VYT, Adhesive Component Labels 31 VCT, Adhesive Component Labels 31 VRT17.5, Adhesive Marker Strips 32 ACCESSORIES Page PMF, Transparent Holders for Flat Wire and Cable Markers 34 PM, Transparent Holders for Wire and Cable Markers 35 PMF-AC, Adhesive Transparent Flat Marker Holders 36 PM-AC, Adhesive Transparent Marker Holders 36 PM-ET, Cable Tie Transparent Marker Holders 36 PT, Push Button Legend Bases 37 PL, Panel Legend Bases 38 TAP-CCS, Push Button and Panel Legend Base Covers 38 RT, Panel Legend Rails and Covers 39 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 1
THERMAL TRANSFER SYSTEM The Standard for Industrial Marking Systems MARKINGenius is an exclusive automated printing system, designed to satisfy all requirements for equipment identification in the electrical field according to CEI 16-7 ed. 1997-06 standard. All media in the MARKINGenius range can be printed, with Windows True Type fonts, in black and over 4,000 other colors. High speed printing is complemented by incredibly long-life ribbons capable of printing more than 150,000 cable tags with no maintenance. MARKINGenius reproduces Clipart images, drawings and bitmaps down to very small dimensions. The MARKINGenius is easy to operate and requires no maintenance MARKINGenius thermal transfer printer is quick and easy to install on your PC via LTP or USB ports. Compact, quiet, clean and remarkably easy to operate, like any other standard ink jet or laser printer, it is ideally suited to use in the office, although its robust design makes it equally suitable to a workshop situation. Each ribbon can produce around 150,000 markers with full surface coverage, while the MARKINGenius state of the art economizer system can increase ribbon life significantly, depending on the actual coverage of the markers. This important feature of hardware management allows the user to calculate exactly the cost of each card of printed markers, simply by measuring the print coverage, therefore giving the user a true printing cost. The ribbon economizer system also optimizes printing times, since while printing speed is constant and independent of the complexity of graphics or the number of fonts used, the actual printing time for any project depends on the percentage coverage of the printed medium. Printing can be completed in as little as 9 seconds per card. For full-color printing with the CMY ribbon (cyan, magenta, yellow), the MARKINGenius three-color fusion process enables a very large number of colors to be obtained up to 4,092 and use of Windows NT, 2000 or XP is recommended to optimize color output, since the driver has many more set-up options compared to Windows 95/98. Three interchangeable support templates provided with MARKINGenius are simply slotted onto the carriage as appropriate to the material being printed. The MARKINGenius unlike its competitors on the market does not have any warming up time or positioning process, so once you turn on the MARKINGenius it is ready to use. Another feature with the MARKINGenius that separates it from the competition is that printed markers are immediately usable, the ink from the ribbon dries at the moment of printing, enabling the markers to be installed without any drying time. 2 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
Simple printing procedure... Switch on Input Data into the PC Support carriage opens Load the markers Print Collect the printed markers...and ribbon change Insert the ribbon Tension the ribbon Lock the ribbon Application: MARKINGenius Cables Tubes/ pipes Conduit Terminal blocks Components Modular Components Connectors Push buttons Panel exteriors Signs MG-TPMF (p.6) 4mm tags for holders MG-TPM (p.6) 4mm tags for holders MG-TDMF (p.7) 5mm tags without holders MG-ETF (p.7) Tie-on tags MG-CPM (p.9) Push in markers MG-CPMF (p.10) Marker strips MG-VYB (p.11) Marker labels the cable the cable the tube/pipe the tube/pipe the terminal block the terminal block the terminal block MG-TAP 15mm legends (p.12) MG-TAPW 9mm legends (p.12) MG-TAA (p.13) Self adhesive legends MG-VYT (p.13) Self adhesive labels MG-PYT (p.14) Self adhesive labels the component the component the component the connector the connector the connector the panel exterior Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 3
MG-757FC MARKINGenius software is suitable for Windows 95/98, NT, 2000 and XP operating systems. The universal printer driver makes it possible to use different operating systems, however, the best results are obtained with NT, 2000 and XP, since the color and half-tone set up is more sophisticated, and the resolution is as high as 300x600 dpi. For monochrome printing there are no significant differences in output between the different operating systems. MARKINGenius hardware, software SOFTWARE FEATURES -Easy data insert -More than ten types of counter -*txt, *.cad, *dbf, *.xls and other files can be imported -ACS and Simplo conversion -AutoCAD, Elcad and Spac importation -Customizable print output filters -Optimized printing of media for cables, terminal blocks, control gear, connectors, push buttons, components, panels and self adhesive labels -Proprietary font -Also uses Windows fonts -Designs customized media -Vector, drawing and clip art printing -Free upgrades with each release MARKINGenius SYSTEM REQUIREMENTS -PC-Pentium II, equivalent or above -128 MB RAM -Windows 98, Me, 2000, NT, XP -10 MB available hard disc space -Video resolution 1024x768, MG2-757FC, GM990715 The MARKINGenius package includes: MARKINGenius printer Power cable MG-USB, GM992004 USB cable MG2-PWC, GM991000 Support template for tags MG2-PLT, GM991002 Support template for legends, labels & signs and all series FLAT media MG2-PTB, GM991001 Support template for terminal block markers MG-CPM except: *MG2-GTB, GM991003 Support template for terminal block markers MG-CPM-03 *MG2-WTB, GM991004 Support template for terminal block markers MG-CPM-05 *MG2-STB, GM991005 Support template for terminal block markers MG-CPM-06 *MG2-CTB, GM991006 Support template for terminal block markers MG-CPM-10 MG2-COV, GM991680 MG2-ETR, GM991600 Protective cover Black printer ribbon Software on CD (includes printer drivers, user license and manual) MARKINGenius is guaranteed for one year against inherent faults and defects. The print head is classed as a consumable and therefore not covered by the guarantee. *Not included in MARKINGenius package. Available on request. 4 MG-TPMF MG-TPM MG-TDMF MG-ETF MG-KMP MG-CPM MG-CPMF MG-VYB MG-TAP MG-TAPW MG-TAR MG-TAA MG-VYT MG-PYT MG-SAT MG-PTS MG-PLC MG-17.5 MG-VRT MG-SIGNS tags for holders tags for holders tags without holders tie-on tags wraparound cable markers terminal markers terminal markers terminal labels legends, 15mm legends, 9mm legends self adhesive labels self adhesive vinyl labels self adhesive polyester labels security labels push button legends PLC tags modular legends and labels marker plates legends and signs MG2-PWC MG2-PLT MG2-PTB MG2-GTB MG2-WTB MG2-STB Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 MG2-CTB
MG-757FC MARKINGenius accessories ACCESSORIES Available separately Type Description Code Quantity MG2-PWC Support template for tags GM991000 1 MG2-PLT Support template for legends, labels & plates and all series FLAT media GM991002 1 MG2-PTB Support template for terminal block markers MG-CPM except: GM991001 1 MG2-GTB Support template for terminal block markers MG-CPM-03 GM991003 1 MG2-WTB Support template for terminal block markers MG-CPM-05 GM991004 1 MG2-STB Support template for terminal block markers MG-CPM-06 GM991005 1 MG2-CTB Support template for terminal block markers MG-CPM-10 GM991006 1 MG2-TWC PET blank for template MG-PWC GM991502 1 MG2-TLT PET blank for template MG-PLT GM991522 1 MG2-TTB PET blank for template MG-PTB GM991512 1 MG2-TGT PET blank for template MG-GTB GM991532 1 MG2-TWT PET blank for template MG-WTB GM991542 1 MG2-TST PET blank for template MG-STB GM991552 1 MG2-TCT PET blank for template MG-CTB GM991562 1 MG2-USB USB printer cable GM992004 1 MG2-CRB Ribbon take up spool GM991654 1 MG2-CKP Print head cleaning kit GM991670 1 MG2-CNP Replacement pads for MG-CKP (5 pieces) GM992150 1 MG2-COV Protective cover GM991680 1 MG-ETR MARKINGenius MG-ETR monochrome ribbons are formulated to produce high quality print on a variety of materials while providing high resistance to abrasion, chemicals (oil, gases and alcohol) and UV light. Ribbon length 200m, width 120mm. MG-STR Three panel CMY ribbon type MG-STR should be used for printing mixed colors, eg to IEC757 code for cable marking, and is not recommended for volume printing in a single color due to its cost and method of printing. PRINTER RIBBONS monochrome MG-ETR Relevant Standards: CEI 16-7 ed. 1997-06 PRINTER RIBBONS multicolor MG-STR Code Quantity black GM991600 1 blue GM991601 1 red GM991602 1 green GM991603 1 silver GM991607 1 Code Quantity GM990717 1 CMY ribbon with cyan, magenta and yellow panels, for printing up to 4,092 colors Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 5
MG-TPMF MG-TPMF tags are used for marking cables, conduit tubes, conductors and components. In stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Material: PVC, self extinguishing class V0 (UL94) Use with: PMF tag holders 34 PMF-AC tag holders 36 PM-ET tag holders 36 CABLE TAGS precut 4mm push in markers MG-TPMF Size mm Code Tags per sheet Quantity white 4x10 GM42090 96 2400 4x12 GM42091 80 2000 MG-TPM tags can be printed in various fonts: the stems can be printed with job details for easy reference. The corresponding type of holder can also be printed next to each tag to assist installation. 4x15 GM42092 80 2000 4x20 GM42093 64 1600 4x30 GM42096 48 1200 4x40 GM42097 32 800 Full stems of tags may be fitted with holders of various sizes appropriate to their individual destination cables. In preparation for installation onto cable, the tag stems are easily separated by breaking the appropriate joints MG-PMF holders can be pushed directly onto the tags without removing them from their stems and are firmly held in place. Each individual tag and holder combination is easily detached from the stem for installation onto cable. The printed tag in its holder is perfectly protected against degradation by chemical and environmental agents over time. MG-TPM CABLE TAGS 4mm push in markers MG-TPM tags are used for marking cables, conduit, tubes, conductors and components. Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Material: ABS, self extinguishing class V0 (UL94) MG-TPM Size mm Code Tags per sheet Quantity white 4x10 GM40090 45 2250 4x15 GM40092 45 2250 Use with: PM tag holders 35 PM-AC tag holders 36 PM-ET tag holders 36 MG-TPM tags can be printed in various fonts: the stems can be printed with job details for easy reference. The corresponding type of holder can also be printed next to each marker to assist installation. PM holders can then be pushed directly onto the tags without removing them from the stems in preparation for later transfer to cables. Tag stems are easily separated by breaking the joined ends. For more efficient working, stems can be cable tied together, using the holes provided. 6 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
MG-TDMF Material: PVC, self extinguishing class V0 (UL94) Use: cables according to the diameter ranges shown in the table. No transparent holders required. CABLE TAGS precut, 5mm push-on one piece markers, without holders MG-TDMF-01 Cable dia.. range 2.2-3mm and c.s.a range 0.75-1.5mm 2 Print Area Size mm Code mm Tags per sheet Quantity white 5.5 x 25 GM42190 5.5 x 10 76 3040 5.5 x 30 GM42191 5.5 x 15 57 2280 MG-TDMF-02 Cable dia.. range 3.2-4mm and c.s.a range 2.50-4mm 2 white 7.5 x 34 GM42292 7.5 x 18 42 2100 MG-ETF MG-ETF tags are used with cable ties for marking large diameter cables, hoses, tubes and conduit. Material: PVC, self extinguishing class V0 (UL94) CABLE & CONDUIT TAGS precut, one piece markers, tie-on MG-ETF Cable tie max width 4.8mm. Print area 11 x 35mm Size mm Code Tags per sheet Quantity white 11 x 55 GM54190 18 900 Use: cables using standard cable ties (not supplied). MG-ETF Cable tie max width 4.8mm. Print area 15 x 20mm Size mm Code Tags per sheet Quantity white 20 x 27 GM54191 20 1000 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 7
MG-KMP MG-KMP wraparound cable markers are suitable for identifying large diameter cables, tubes and conduit. MARKINGenius printing is exceptionally clear and legible and is protected from chemical and atmospheric agents. Material: Soft Vinyl, thickness.1mm. Resistant to water, oil, grease, alcohol, detergent, alkaline substances and atmospheric agents. Self extinguishing, high resistance to UV radiation. Temperature range -30 C to + 80 C Use: wires and cables in accordance with wrapping diameter shown for each size. WRAPAROUND CABLE MARKERS self adhesive, precut MG-KMP 038 MG-KMP 050 MG-KMP 075 MG-KMP 100 Max. wrapping diameter 7mm. Overall length A: 38mm Print area CxBmm Code Markers per sheet Quantity white 10x15 GM48950-015 12 600 10x23 GM48950-023 8 400 Max. wrapping diameter 10mm. Overall length A: 50mm white 15x15 GM48951-015 12 600 15x23 GM48951-023 8 400 Max. wrapping diameter 14mm. Overall length A: 75mm white 25x15 GM48952-015 6 300 25x23 GM48952-023 4 200 Max. wrapping diameter 20mm. Overall length A: 100mm white 25x15 GM48953-015 6 300 25x23 GM48953-023 4 200 8 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
MG-CPM MG-CPM terminal block markers are available in versions to suit the particular clip formats of the most widely used products. Material: Polycarbonate, self extinguishing according to class V0 (UL94) Use: terminal block using the rear mounted clips. TERMINAL BLOCK MARKERS MG-CPM-01 For Conta-clip, Harting, Weidmuller, Wago, Woertz, Entrelec MG-CPM-02 MG-CPM-03 Size mm Pitch mm Application Code Markers per sheet Quantity white 5x10 8 single GM41090 32 1120 5x15 8 single GM41091 32 1120 For Weidmuller series WDK & WDU, Conta Clip, Entrelec, Wago, Woertz white 5x10 8 single GM41190 32 1120 For Wago, Entrelec, Cabur, Phoenix Contact white 5x10 5 single GM41291 56 1960 5x10 5 strip of 10 GM41293 56 1960 MG-CPM-04 For Harting, Phoenix Contact, Cabur, Entrelec, Wago To print marker...use template TERMINAL BLOCK MARKER MG-CPM-01 MG-CPM-02 MG-CPM-03 MG-CPM-04 MG-CPM-05 MG-CPM-06 MG-CPM-10 MG-PTB MG-GTB MG-WTB MG-STB MG-CTB MG-CPM-05 MG-CPM-06 white 5x10 8 single GM41390 32 1120 For Phoenix Contact type UK white 5x10 5.2 strip of 10 GM41395 48 1680 For Wieland, Telemecanique, Sprecher + Schuh, Legrand white 5x10 5 single GM41490 56 1960 5x10 5 strip of 10 GM41494 56 1960 For Siemens white 5x10 6 single GM41590 44 1540 MG-CPM-10 For Cabur white 5x12 5.5 single GM46192 48 1680 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 9
MG-CPMF Material: PVC, self extinguishing class V0 (UL94) Use with: STF terminal blocks TERMINAL BLOCK MARKER STRIPS precut MG-CPMF Strips Size mm WITH STF TERMINAL MARKER BRACKETS Code Strips per sheet Quantity white 10X105 GM43090 10 500 Vinyl self adhesive overlay strip white 10X105 GM43090 10 500 ADVANTAGES MARKINGenius software provides easily selectable, preset pitch formats for the leading brands and ranges of terminal brands including: EXCELLENT LEGIBILITY- MARKINGenius highest quality print is presented in the most easy to read traditional orientation for terminal markers. QUICK AND EASY PRINTING- MARKINGenius software provides easily selectable, preset pitch formats to suit a wide variety of the leading brands and ranges of terminal blocks. A complete sheet of marker strips with up to 260 markers at 4mm pitch is printed in 10 seconds. Simple Installation 1- INSERT APPROPRIATE STF BRACKETS INTO TERMINAL BLOCKS 2- CLIP PRINTED MG-CPMF MARKER STRIP INTO THE BRACKETS Brand Terminal Blocks Pitch mm Markers per strip Markers per sheet Wago 279-62 4 26 260 Weidmuller SAK 2.5 N 5 21 210 Phoenix Contact UK 2.5 N 5.2 20 200 Cabur CBD. 2/4 5.5 19 190 Telemecanique AB1-W435U 6 17 170 STF For use with the leading brands and ranges of pitched terminal blocks to allow rapid mounting of marker strips MG-CPMF. BRACKETS FOR TERMINAL BLOCK MARKER STRIPS clip in STF-01 For Weidmuller SAK & WDU Code Quantity Material: Polyamide PA6.6 self-extinguishing class V0 (UL94) Use with: MG-CPMF terminal marker strips gray RAL 7035 STF-03 For Wago (top mounting) gray RAL 7035 GM42801 500 GM42803 500 STF-03 For Wago (lateral mounting) Phoenix Contact UK, Siemens BWA 1, Entrelec MA gray RAL 7035 GM42804 500 STF-03 For Wieland WK & WKF, Telemecanique gray RAL 7035 STF-10 For Cabur CBD & HMM) GM42805 500 10 gray GM42810 500 RAL 7035 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
MG-CPMF Material: PVC, self extinguishing class V0 (UL94) TERMINAL BLOCK MARKER STRIPS precut MG-CPMF Strips DIRECTLY ON TERMINAL BLOCKS Size mm Code Strips per sheet Quantity Use: terminal blocks. white 7.6x105 GM43090 12 600 MG-CPMF For Phoenix Contact ST-4 & ST-4 Twin white 6.3x105 GM43092 15 750 MG-CPMF For Wago Top Job Terminal Blocks white 6.3x105 GM43092 15 750 MG-CPMF For Weidmuller SAK & Phoenix Contact UK white 6.3x105 GM43092 15 750 Material: Vinyl MG-VYB Use: terminal blocks. TERMINAL BLOCK MARKER LABELS precut, self adhesive MG-VYB For WAGO Series 261 Size mm DIRECTLY ON TERMINAL BLOCKS Code Strips per sheet Quantity white 7.6x105 GM16090 114 700 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 11
MG-TAP MG-TAP legends are particularly versatile for identifying cables, conduit, push buttons, machinery, components, etc. Material: PVC, self extinguishing class V0 (UL94) LEGENDS 15mm precut MG-TAP Size mm Code Legends per sheet Quantity white 15x27 GM47091 24 1200 15x49 GM47092 12 600 15x67 GM47093 6 300 Use with: PT push button legend bases 37 PL legend bases 38 RTR-TAP & RTA-TAP legend rails 39 metallic gray 15x27 GM47001 24 1200 15x49 GM47002 12 600 15x67 GM47003 6 300 MG-TAP Only for Siemens push button base type 3SB1903-0AB white 6.3x105 GM43092 15 750 MG-TAP Only for Telemecanique push button base type ZBZ-32 white 6.3x105 GM43092 15 750 MG-TAP Only for Telemecanique push button bases type ZBZ-33 & ZBZ-35 white 6.3x105 GM43092 15 750 MG-TAPW MG-TAPW legends are used with legend holders or legend rails, to identify a wide range of cables and components. Material: PVC, self extinguishing class V0 (UL94) LEGENDS 9mm precut MG-TAPW Size mm Code Legends per sheet Quantity white 9x20 GM49090 50 2500 Use with: RTR-TAP & RTA-TAP legend rails 39 MG-TAPW legends provide excellent graphic results with the variety of fonts available. Circuit data or Job details can be printed on the stem of the sheet to assist installation efficiency. When printed, the legends are simply divided into strips. Individual legends are detached easily and precisely, with clean edges. Example of an MG-TAPW legend mounted on RTR-TAPW legend rail with RT-CCWS transparent cover. 12 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
MG-TAA LEGENDS self adhesive, precut MG-TAA legends are available in the same sizes as MG-TAPW and MG-TAP. MG-TAA Self adhesive, they can be applied to panels, components and equipment Size mm Code Legends per sheet Quantity white 7x20 GM47090 36 900 8x12 GM47091 24 1200 Material: PVC, self extinguishing class V0 (UL94) 9x12 GM47092 12 600 9x20 GM47093 6 300 9x35 GM47040 36 900 Use: 9x50 GM47041 24 1200 suitable surfaces. 10x105 GM47042 12 600 14x84 GM47043 6 300 15x17 GM47000 36 900 15x27 GM47001 24 1200 15x35 GM47002 12 600 15x44 GM47003 6 300 15x49 GM47090 36 900 15x67 GM47091 24 1200 17x32 GM47092 12 600 17x35 GM47093 6 300 20x40 GM47040 36 900 20x48 GM47041 24 1200 20x72 GM47042 12 600 20x96 GM47043 6 300 MG-VYT Dielectric vinyl labels used for internal and external marking. The range of available sizes allows marking of a great variety of components from different manufacturers. Material: Vinyl Use: suitable surfaces. LABELS self adhesive precut MG-VYT Size mm Code Legends per sheet Quantity white 7x10 GM44891 120 6000 6x15 GM46915 105 5250 8x12 GM46918 96 4800 9x12 GM46914 80 4000 9x15 GM44895 70 3500 9x20 GM44896 50 2500 9x35 GM46910 30 1500 15x27 GM46921 24 1200 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 13
MG-PYT Polyester self adhesive labels, suitable for marking components, with better resistance to high temperatures, temperature variations and shrinkage than vinyl versions. Material: Polyester, UL and CSA approved Use: suitable surfaces. LABELS self adhesive precut MG-PYT Size mm Code Legends per sheet Quantity white 6x15 GM47916 105 5250 7x10 GM47191 120 6000 9x15 GM47195 70 3500 9x20 GM47196 50 2500 75x120 GM47915 1 50 105x110 GM47913 1 50 14 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
MG-PTS Push-out the 22.5mm blank to locate and secure the legend behind the manual operator head. Material: PVC, self extinguishing class V0 (UL94) PUSH BUTTON LEGENDS for 22.5 mm operators, precut MG-PTS Size mm Code Legends per sheet Quantity white 40x30 GM15090 6 300 Use: suitable surfaces. MG-PLC Legends replace the strips supplied with the devices and automatically print at the correct spacing. Material: PVC, self extinguishing class V0 (UL94) Use: Direct application to Siemens PLCs. PLC LEGENDS precut MG-PLC for Siemens PLC type SIMATIC S7-300 Size mm Code Legends per sheet Quantity white 17.5x103.5 GM71090 6 300 22.75x103.5 GM71091 5 200 yellow 17.5x103.5 GM71040 6 300 22.75x103.5 GM71041 5 200 metallic 17.5x103.5 GM71000 6 300 gray 22.75x103.5 GM71001 5 200 MG-PLC for Siemens PLC distributed I/O station type SIMATIC ET 200S Size mm Code Legends per sheet Quantity white 12.7x50 GM71092 14 700 yellow metallic gray 12.7x50 GM71042 14 700 12.7x50 GM71002 14 700 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 15
MG-VRT-A MG-VRT rigid PVC marker plates are used to create name plates, machine identification plates, data and rating plates using company logos, technical data, serial numbers, certification and approval information. To increase label durability a transparent polycarbonate cover can be placed over the MG-VRT label Material: Rigid PVC, self extinguishing according to V0 (UL94) Use: suitable surfaces. MARKER PLATES self adhesive, customizable MG-VRT-AH Pre-drilled with holes 4mm diameter, thickness.5mm Size mm Code N holes Plates per sheet Quantity white 20x40 25x50 GM88920 GM88906 2 2 10 8 250 200 25x75 GM88907 2 4 100 25x100 GM88914 2 4 200 35x100 GM88909 2 3 75 35x100 GM88910 4 3 75 42x78 GM88922 2 2 100 50x100 GM88911 4 2 50 52x107 GM88923 2 2 100 75x120 GM88915 4 1 50 105x110 GM88912 4 1 25 MG-VRT-A Un-drilled, thickness.5mm white 25x100 GM88905-4 200 25x50 GM88916-8 400 25x80 GM88908-4 200 32x58 GM88900-3 150 35x100 GM88917-3 75 42x78 GM88901-2 100 50x50 GM88918-4 200 55x82 GM88921-2 100 62x88 GM88902-1 50 52x107 GM88903-2 100 92x120 GM88913-1 50 105x110 GM88904-1 50 white 25x100 GM88405-4 200 25x50 GM88416-8 400 25x80 GM88408-4 200 32x58 GM88400-3 150 35x100 GM88417-3 75 42x78 GM88401-2 100 50x50 GM88418-4 200 55x82 GM88421-2 100 62x88 GM88402-1 50 52x107 GM88403-2 100 92x120 GM88413-1 50 105x110 GM88404-1 50 metallic 32x58 GM88700-3 150 grey 42x78 GM88701-2 100 62x88 GM88702-1 50 52x107 GM88703-2 100 55x82 GM88721-2 100 92x120 GM88713-1 50 105x110 GM88704-1 50 16 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
THERMAL TRANSFER SYSTEM FOR REEL MEDIA PRINTING The ROLLY 1000 marking system from ASI is designed for volume printing of wire and cable markers and adhesive labels. Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 17
ROLLY 1000 Robust and quiet, ROLLY 1000 provides reliable, operation in an office or factory environment, combined with the facility to optimize printer setup for each medium. User friendly ROLLY 1000 takes less than two minutes to print 1000 4x15mm cable tags to 300 dpi quality. THERMAL TRANSFER PRINTER SOFTWARE FEATURES -Easy data insert -More than ten types of counter -*txt, *.cad, *dbf, *.xls and other files can be imported -Customizable print output filters -Also uses Windows fonts -Free upgrades with each release SYSTEM REQUIREMENTS -PC-Pentium II, equivalent or above -128 MB RAM -Windows 98, Me, 2000, NT, XP -10 MB available hard disc space -Video resolution 1024x768 PRINTER Rolly 1000 Code Quantity GM990810 1 TPS-060 PRINTER RIBBON The Rolly 1000 TPS-060 ribbons are formulated to produce high quality print on a variety of materials while providing high resistance to abrasion, chemicals (oil, gases and alcohol) and UV light. TPS-060 Code Quantity black GM992112 1 blue GM992113 1 red GM992115 1 green GM992114 1 18 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
TPM-ROLL TPM-ROLL tags are used for marking cables, conduit, tubes, conductors and components. Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Material: PVC, self extinguishing class V0 (UL94) Use with: PMF transparent holders 34 PMF-AC transparent holders 36 PMF-ET transparent holders 36 CABLE TAGS precut 4mm push in markers, on a reel TPM-ROLL Size mm Code Quantity white 4x10 GM44090 900 4x12 GM44091 1200 yellow 4x15 GM44092 600 4x20 GM44093 300 4x30 GM44096 900 4x10 GM44040 1200 4x12 GM44041 600 4x15 GM44042 300 4x20 GM44043 1200 4x30 GM44046 600 When printing is completed, each strip of tags can easily be accessed for insertion into PMF holders. Tags are spaced to allow PMF holders to be pre-fitted. Pre-cut strips can easily be separated. A strip of 12 tags pre-fitted with its PMF holders. Any pre-fitted tag can easily be removed for installation on the cable. The final result is perfectly legible and protected against chemical and environmental contamination. Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 19
KM-ROLL KM-ROLL wraparound cable markers are suitable for identifying large diameter cables, tubes and conduit. The printing, using Rolly 1000, is exceptionally clear and legible and is protected from oil, gases and UV light. Material: Polyolefin, self adhesive. Thickness.088mm Temperature range -40 C to + 150 C Minimum application temperature: + 10 C WRAPAROUND CABLE MARKERS self adhesive, precut KM-ROLL 025 Max. wrapping diameter 4.5mm. Overall length A: 25mm KM-ROLL 038 Print area CxB mm Code Columns Rows Quantity white 9x15 GM58955-015 5 1700 8500 9x23 GM58955-023 4 1700 6800 white Max. wrapping diameter 7mm. Overall length A: 38mm 10x15 GM58950-015 5 1200 6000 10x23 GM58950-023 4 1200 4800 KM-ROLL 050 Max. wrapping diameter 10mm. Overall length A: 50mm white 15x15 GM58951-015 5 900 4500 15x23 GM58951-023 4 900 3600 Use: wires and cables in accordance with wrapping diameter shown for each size. KM-ROLL 075 white Max. wrapping diameter 14mm. Overall length A: 75mm 25x15 GM58952-015 5 600 3000 25x23 GM58952-023 4 600 2400 KM-ROLL 100 Max. wrapping diameter 20mm. Overall length A: 100mm KM-ROLL 135 white 25x15 GM58953-015 5 480 2400 25x23 GM58953-023 4 480 1920 Max. wrapping diameter 34mm. Overall length A: 135mm white 25x15 GM58954-015 5 350 1750 25x23 GM58954-023 4 350 1400 20 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
TTL THERMAL TRANSFER LABELS self adhesive, on a reel The TTL label range is pre-set within the MARKINGenius and ROLLY 1000 software for all function optimization. Spool diameter: 76mm TTL rectangular, rounded corners Size A x B mm Code Tracks C mm Horizontal arrangement D mm Quantity 6.35x14.30 GM8400003... 4 74 108 13000 7x10 GM8400093... 5 70 108 15000 7x21 GM8400009... 3 77 115 12000 8x12 GM8400091... 4 65 108 10000 9x15 GM8400092... 4 76 108 8800 9x20 GM8400017... 3 72 115 10000 9x38 GM8400094... 2 48 108 4400 TTL rectangular, square corners Vertical arrangement 7x20 GM8401010... 3 75 115 12000 15x27 GM8401008... 3 94 110 4980 Materials available. Add material reference below to Code: WPYG SPYM PPYG YPYM Material Surface Thickness micron Temperature Temperature Min. for Applying Adhesive Approval RESISTANCE Chemical agents UV radiation Heat Moisture WPYG Polyester white gloss 50-40 C to +140 C +10 C permanent UL, CSA 4 3 4 4 SPYM Polyester silver matte 80-40 C to +140 C +10 C permanent UL, CSA PPYG Polyester platinum gloss 50-40 C to +140 C +10 C permanent UL, CSA low 0...1...2...good...3...4...5 high 4 3 4 4 4 3 4 4 YPYM Polyester yellow matte 50-40 C to +150 C +10 C permanent UL 4 3 4 4 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 21
PLOTTER SYSTEM PLOT SYSTEM consists of a flatbed A3 plotter, support templates for different media and easy to use Windows-based software, in two versions: advanced and basic. The PS-PLT template supports sheets of PLOT SYSTEM tags, markers and legends, presented in stem format, designed for the identification of cables, terminal blocks, control gear, push buttons and many other components. The PS-PLL template supports all PLOT SYSTEM labels and marker plates, presented singly or in sheet format, rivet fixing or self adhesive for component and equipment identification, as well as wraparound and self adhesive cable markers. 17.5 modular legends are printed using the PS-PLM template. MARKINGenius cable tags type MG-TPM and terminal block markers MG-CPM may also be printed on the plotter using the template PS-MGP. Templates to support all PLOT SYSTEM markers are available for many models of flatbed A3 plotters, including some no longer in production. PLOT SYSTEM identification and labeling media meet the requirements of CEI 16-7 and 1997-06. Application: PLOT SYSTEM Cables Tubes/ pipes Conduit Terminal blocks Components Modular Components Connectors Push buttons Panel exteriors TPM (p.26) 4mm tags for holders TDM (p.26) 5mm tags without holders CPM (p.27) Push in markers SPM (p.29) Component markers the cable the terminal block the component TAP 15mm legends (p.30) TAPW 9mm legends (p.30) TAA (p.30) Self adhesive legends VYT (p.31) Self adhesive labels VCT (p.31) Self adhesive labels the component the component the component the connector the connector the connector 22 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
PLOT SYSTEM PLOT SYSTEM hardware, software PLOT SYSTEM software is designed for 32 bit operating systems and is simple, intuitive and complete with all tools required by the designer and user. Including: electrical symbols, simple and complex counters, prefix and suffix addition, duplication, copying, jobs, projects, modifications, customization. PLOT SYSTEM has everything expected from industrial marking software and is distributed free of charge to users whenever an upgrade is released. SOFTWARE FEATURES -Easy data insert -More than ten types of counter -*txt, *.cad, *dbf, *.xls and other files can be imported -ACS and Simplo conversion -AutoCAD, Elcad and Spac importation -Customizable print output filters -Optimized printing of media for cables, terminal blocks, control gear, connectors, push buttons, components, panels and self adhesive labels -Proprietary font -Also uses Windows fonts -Designs customized media -Vector, drawing and clip art printing -Free upgrades with each release SYSTEM REQUIREMENTS -PC-Pentium II, equivalent or above -16 MB RAM -Windows installed -10 MB available hard disc space -Video resolution 800x600 -A3 flatbed pen plotter PLOT SYSTEM GM990576 PLOT SYSTEM package includes: Graphtec MP 303-04 A3 format plotter Power cable GM990551 Parallel cable MG-USB, GM992004 USB cable PS-PLT, GM990556-5 Support template for PS-PLT GM990621 Long life Pen.35mm GM990626 GM990436 Aluminum collar for Long life pens Black extra indelible ink 30ml Software on CD (includes printer drivers, user license and manual) PLOT SYSTEM is guaranteed for one year against inherent faults and defects. Pens are classed as consumables and therefore not covered by the guarantee. To print media...>use template TPM Cable tags TDM Cable markers KMP Wraparound cable markers with square corners KMPR Wraparound cable markers with rounded corners CPM Terminal block markers SPM Component markers NPM Connector markers TAP Legend 15mm TAPW Legend 9mm TAA Legend self adhesive VYT Labels VCT Labels PYT Labels SAT Security labels SPC A4 sheet self adhesive VRT-17.5 Modular legends VRT Marker plates ALT Marker plates MG-CPM Terminal block markers MG-TPM Cable tags CMSC Wire, cable and conduit markers CPM-S / CPM04 Strip terminal block markers CPM-S / CPM01 Strip card terminal block markers CMSB Sensor distribution box markers PS-PLT PS-PLL PS-PLM PS-MGP PS-TCM PS-SMS PS-SCM PS-ECM Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 23
PLOT SYSTEM ACCESSORIES PENS Long Life for Graphtec 303-04 and Graphtec series 5000 & 4000 Code Description Quantity GM990621.35mm 1 GM990618.50mm 1 PEN COLLARS for Graphtec with Long Life pens PENS Long Life for other plotters GM990619.70mm 1 GM990620 1.00mm 1 GM990626 for Graphtec 303-04 and 5000 series 1 GM900634 for Graphtec 4000 series 1 24 GM990600.35mm 1 GM990601.50mm 1 PEN COLLARS for other plotters with Long Life pens PENS Standard PEN COLLARS for standard pens PLASTIC BODY with reservoir INK CLEANING SOLVENT for ink DILUTION SOLVENT for ink GM990602.70mm 1 GM990603 1.00mm 1 GM990622 for Roland DXY with Long Life pens (4-part kit) 1 GM900637 for Roland DXY lowered bed with Long Life pens 1 GM990543.25mm 1 GM990557.35mm 1 GM990558.50mm 1 GM990544.70mm 1 GM990581 for Graphtec 5000 series 1 GM900628 for Graphtec 4000 series 1 GM990546 for Roland DXY (3-part kit) 1 GM900628 for Roland DXY lowered bed (3-part kit) 1 GM990586 standard for Roland DXY 1 GM900587 maxi for Roland DXY 1 GM990436 extra indelible black 30 ml 1 GM900561 extra indelible red 30 ml 1 GM990438 50 ml 1 GM900439 160 ml 1 GM990440 50 ml 1 GM900441 160 ml 1 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
PLOT SYSTEM SUPPORT TEMPLATES A Plot System conversion kit is available for all existing plotter systems on the market. The conversion kit consists of the Plot System software, operating manual and the support template. Please contact ASI with your existing plotter hardware information and ASI will match the correct conversion kit to fit your needs. PS-PLT for stem format markers Code Description Quantity GM990618-5 Graphtec MP5000/MP303-04 1 GM994000-5 Roland DXY1150A 1 GM994030-4 Roland DXY1150A (recessed bed) 1 GM990646-8 EK-Team (aluminum) 1 PS-PLL for labels, marker plates and wraparound markers GM994030-3 Graphtec MP5000/MP303-04 1 GM994010-3 Roland DXY1150A 1 GM994040-3 Roland DXY1150A (recessed bed) 1 GM994050-4 EK-Team (aluminum) 1 PS-MGP for stem format markers MG-TPM (pg.8) and terminal block markers MG-CPM (pg.11) GM990697-5 Graphtec MP5000/MP303-04 1 GM994007-5 Roland DXY1150A 1 GM994037-4 Roland DXY1150A (recessed bed) 1 GM994047-8 EK-Team (aluminum) 1 PS-TCM for CMSC (pg.28) wire, cable and conduit markers GM994028-4 Graphtec MP5000/MP303-04 1 GM994008-4 Roland DXY1150A 1 GM994038-4 Roland DXY1150A (recessed bed) 1 GM994048-8 EK-Team (aluminum) 1 PS-SMS for CPM-S CPM04 (pg.28) strip terminal block markers GM994021-5 Graphtec MP5000/MP303-04 1 GM994001-5 Roland DXY1150A 1 GM994031-4 Roland DXY1150A (recessed bed) 1 GM994041-8 EK-Team (aluminum) 1 PS-SCM for CPM-S CPM01 (pg.28) strip card terminal block markers GM994022-5 Graphtec MP5000/MP303-04 for ASI434003 1 GM994002-5 Roland DXY1150A for ASI434003 1 GM994032-4 Roland DXY1150A (recessed bed) for ASI434003 1 GM994042-8 EK-Team (aluminum) for ASI434003 1 GM994023-5 Graphtec MP5000/MP303-04 for ASI434004 1 GM994003-5 Roland DXY1150A for ASI434004 1 GM994033-4 Roland DXY1150A (recessed bed) for ASI434004 1 GM994043-8 EK-Team (aluminum) for ASI434004 1 GM994024-5 Graphtec MP5000/MP303-04 for ASI434000 1 GM994004-5 Roland DXY1150A for ASI434000 1 GM994034-4 Roland DXY1150A (recessed bed) for ASI434000 1 GM994044-8 EK-Team (aluminum) for ASI434000 1 GM994025-5 Graphtec MP5000/MP303-04 for ASI434006 1 GM994005-5 Roland DXY1150A for ASI434006 1 GM994035-4 Roland DXY1150A (recessed bed) for ASI434006 1 GM994045-8 EK-Team (aluminum) for ASI434006 1 GM994065-5 Graphtec MP5000/MP303-04 for ASI434015 1 GM994006-5 Roland DXY1150A for ASI434015 1 GM994036-4 Roland DXY1150A (recessed bed) for ASI434015 1 GM994046-8 EK-Team (aluminum) for ASI434015 1 PS-ECM for CMSB (pg.29) sensor distribution box markers GM994029-5 Graphtec MP5000/MP303-04 1 GM994009-5 Roland DXY1150A 1 GM994039-4 Roland DXY1150A (recessed bed) 1 GM994049-8 EK-Team (aluminum) 1 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 25
TPM CABLE TAGS 4mm push in, for holders TPM tags are used to mark cables, conduit, tubes, conductors and components. Presented in stem format, tags are simply snapped off their stems and inserted into the appropriate holders. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Use with: PM tag holders 35 PM-AC tag holders 36 PM-ET tag holders 36 TPM Size mm Code Tags per sheet Quantity white 4x10 GM30090 59 1062 4x12 GM30091 59 1062 4x15 GM30092 59 1062 4x18 GM30093 59 1062 4x23 GM30094 53 954 4x27 GM30095 35 630 4x30 GM30096 35 630 Print with: PS-PLT support templates 26 TDM Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Use: cables according to the diameter ranges shown in the table. No transparent holders required. Print with: PS-PLT support templates 26 CABLE MARKERS one piece without holder TDM-01 Wire diameter range: 1.6-3.25 mm (.06 -.13 ) Wire size:.05-1.5 mm 2 (20-16 AWG) Size mm Code Tags per sheet Quantity white 4x12 GM30190 42 1050 4x15 GM30191 42 1050 4x18 GM30192 28 700 4x23 GM30193 28 700 yellow 4x12 GM30140 42 1050 4x15 GM30141 42 1050 4x18 GM30142 28 700 4x23 GM30143 28 700 26 TDM-02 Wire diameter range: 2.1-4.25 mm (.08 -.17 ) Wire size: 1.0-4 mm 2 (18-10 AWG) Size mm Code Tags per sheet Quantity white 4x12 GM30290 42 1050 4x15 GM30291 42 1050 4x18 GM30292 28 700 4x23 GM30293 28 700 yellow 4x12 GM30240 42 1050 4x15 GM30241 42 1050 4x18 GM30242 28 700 4x23 GM30243 28 700 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
CPM CPM terminal block markers are available in many different versions to fit onto virtually any terminal block throughout the world. The CPM series marker is a universal single apply marker where the same marker will fit many different terminal blocks. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Non-deformable up to 135 C Use: terminal blocks using the rear mounted clips. Print with: PS-PLT support templates 26 SINGLE APPLY TERMINAL BLOCK MARKERS CPM-01 For Conta-Clip, Harting, Weidmuller, Entrelec, Wago, Woertz Size mm Code Markers per sheet Quantity white 5x10 GM31090 42 1050 5x15 GM31091 42 1050 6x10 GM31092 42 1050 6x15 GM31093 42 1050 CPM-02 For Weidmuller WDK & WDU series, Conta Clip, Entrelec, Wago, Woertz white 5x10 GM31190 42 1050 CPM-03 For Wago, Cabur, Entrelec, Phoenix Contact white 3.9x10 GM31290 81 1215 CPM-04 For Cabur, Entrelec, Harting, Phoenix Contact, Wago white 5x10 GM31390 42 1050 5x15 GM31391 42 1050 6x10 GM31392 42 1050 6x15 GM31393 42 1050 CPM-05 For Sprecher + Schuh, Telemecanique, Wieland CPM-06 For Siemens white 5x10 GM31490 42 1050 5x15 GM31491 42 1050 6x10 GM31492 42 1050 6x15 GM31493 42 1050 white 5x7 GM31590 51 1020 5x10 GM31591 51 1020 CPM-08 For Weidmuller series WDU & WPU, Wago, Woertz white 6x12 GM31790 54 1080 CPM-09 For Legrand Viking 3 CPM-10 For Cabur (straddle fitting) white 5x11 (pitch 6mm) GM31891 54 1080 5x11 (pitch 8mm) GM31890 42 1050 white 5x10(pitch 6.5mm) GM36190 51 1020 5x10(pitch 8mm) GM36191 42 1050 5x12(pitch 6.5mm) GM36192 51 1020 5x12(pitch 8mm) GM36193 42 1050 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 27
CPM CPM terminal block markers are available in many different versions to fit onto virtually any terminal block throughout the world. The CPM series marker is a universal single apply marker where the same marker will fit many different terminal blocks. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Non-deformable up to 135 C SINGLE APPLY TERMINAL BLOCK MARKERS CPM-11 For Allen Bradley, Conta-Clip, Automation Direct, Weidmuller, Woertz Size mm Code Markers per sheet Quantity white 5x9 GM36290 54 1080 5x12 GM36291 54 1080 6x9 GM36292 54 1080 6x12 GM36293 54 1080 CPM-S CPM-S terminal block marker strips are available in many versions to fit terminal blocks of different sizes and pitch. The CPM-S series marker strips are configured into a modular strip of 10 markers. These strips are sized according to the terminal block. Material: Polyamide, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Print with: PS-SMS or PS-SCM support templates 26 CMSC STRIP APPLY TERMINAL BLOCK MARKERS CPM-01 For Conta-Clip, Harting, Weidmuller, Entrelec, Wago, Woertz Size mm Pitch mm Code Markers per strip Quantity white 5x5.5 5 ASI434003 10 1040 5x12 5 ASI434000 10 1040 6x5.5 6 ASI434004 10 1040 6x12 6 ASI434006 10 1040 8x12 6 ASI434015 10 1040 CPM-04 For Cabur, Entrelec, Harting, Phoenix Contact, Wago Size mm Pitch mm Code Markers per strip Quantity white 4x10 4 ASI014013 10 1000 5x10 5 ASI014001 10 1000 WIRE, CABLE AND CONDUIT MARKERS one piece, attaches with a cable tie 5x10 5.08 ASI014019 10 1000 6x10 6 ASI014002 10 1000 7x10 8 ASI014003 10 1000 9x10 10 ASI014004 10 1000 Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Use: The CMSC is made especially for sensor and solenoid cables. It mounts directly on the cable with a standard cable tie. Print with: PS-TCM support templates 26 CMSC Size mm Code Tags per sheet Quantity white 12x27 ASI014439 16 192 28 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
SPM SPM markers are available in versions to suit the particular clip formats of the most widely used contactors, relays, drives, valves and other panel mounting components. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Non-deformable up to 135 C Use: components using the rear mounted clips. Print with: PS-PLT support templates 26 COMPONENT MARKERS for the leading brands and types SPM-01 For Telemecanique contactors Size mm Code Markers per sheet Quantity white 8x7 GM32090 15 300 8x21 GM32091 15 300 SPM-02 For Siemens Sirius series contactors white 7x10 GM32190 27 540 7x20 GM32191 15 300 green Siemens SPM-03 For Siemens and Moller contactors 7x10 GM32150 27 300 7x20 GM32151 15 300 white 9x20 GM32290 15 300 yellow 9x20 GM32240 15 300 SPM-05 For General Electric contactors white 8x18 GM32490 15 300 yellow 8x18 GM32440 15 300 SPM-06 For Allen Bradley, Sprecher + Schuh contactors white 12x17 GM32590 21 315 yellow 12x17 GM32540 21 315 SPM-08 For Lovato MC series contactors and thermal relays white 6x12 GM32790 54 324 CMSB For Turck and Escha Sensor Distribution Boxes white 8x20 ASI014440 20 380 NPM NPM markers are available in versions to suit the formats of the most widely used electrical connectors. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Non-deformable up to 135 C CONNECTOR MARKERS for the leading brands and types NPM-02 For Harting and Wago connectors white 6x10 GM33190 42 1050 yellow 6x10 GM33140 42 1050 Print with: PS-PLT support templates 26 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 29
TAP LEGENDS 15mm TAP markers, used with transparent legend holders, bases or legend rails, are particularly versatile for identifying large diameter cables, pipes, conduit, push buttons, machinery, components, etc. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Non-deformable up to 135 C Use with: PM-ET, tag holders 36 PT push button legend bases 37 PL legend bases 38 RTR-TAP & RTA-TAP legend rails 39 TAP Print with: PS-PLT support templates 26 Size mm Code Legends per sheet Quantity white 15x17 GM37090 18 540 15x27 GM37091 12 360 15x49 GM37092 6 180 15x67 GM37093 3 90 yellow 15x17 GM37040 18 540 15x27 GM37041 12 360 15x49 GM37042 6 180 15x67 GM37043 3 90 TAPW TAPW legends are used, with legend holders or legend rails, to identify a wide range of cables and components. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Non-deformable up to 135 C Use with: PM-ET, tag holders 36 RTR-TAP & RTA-TAP legend rails 39 Print with: PS-PLT support templates 26 LEGENDS 9mm TAPW Size mm Code Legends per sheet Quantity white 9x20 GM39090 15 450 9x35 GM39091 9 270 yellow 9x20 GM39040 15 450 9x35 GM39041 9 270 TAA LEGENDS 9mm & 15mm, self adhesive TAA legends are available in the same sizes as TAPW and TAP. Self adhesive, they can be applied to panels, components and equipment. Material: Polycarbonate, self extinguishing according to class V0 (UL94), high mechanical strength and excellent dimensional stability. Non-deformable up to 135 C Print with: PS-PLT support templates 26 TAA Size mm Code Legends per sheet Quantity white 9x20 GM39190 15 450 9x35 GM39191 9 270 15x17 GM39192 18 540 15x27 GM39193 12 360 15x49 GM39194 6 180 15x67 GM39195 3 90 30 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
VYT VYT dielectirc vinyl labels are used for internal and external marking. The range of available sizes allows marking of a great variety of components from different manufacturers. Material: Soft Vinyl, thickness.1mm. Resistant to water, oil, grease, alcohol, detergent, alkaline substances and atmospheric agents. Self extinguishing, high resistance to UV radiation Use: suitable surfaces. Temperature Range: -30 C to + 80 C Print with: PS-PLL support templates 26 LABELS self adhesive precut vinyl VYT Sheet 110x150mm Size mm Code Labels per sheet Quantity white 6x15 GM34890 135 2700 7x10 GM34891 169 3380 7x20 GM34892 78 1560 8x17 GM34893 77 1540 8x20 GM34894 66 1320 9x15 GM34895 80 1600 9x20 GM34896 60 1200 yellow 6x15 GM34840 135 2700 7x10 GM34841 169 3380 7x20 GM34842 78 1560 8x17 GM34843 77 1540 8x20 GM34844 66 1320 9x15 GM34845 80 1600 9x20 GM34846 60 1200 VYT Sheet 297x210mm white 8x20 GM56900 297 2970 9x15 GM56901 360 3600 9x20 GM56902 270 2700 11x19 GM56903 240 2400 yellow 8x20 GM56400 297 2970 9x15 GM56401 360 3600 9x20 GM56402 270 2700 11x19 GM56403 240 2400 VCT VCT dielectirc vinyl fabric labels are used for internal and external marking. The range of available sizes allows marking of a great variety of components from different manufacturers. Print only with permanent pens. Material: Vinyl fabric, thickness.15mm with acrylic adhesive. Resistant to water, alcohol, oils and acids. Use: suitable surfaces. LABELS self adhesive precut vinyl fabric VYT Sheet 110x150mm yellow without border Print with: Permanent pens 24 PS-PLL support templates 26 Size mm Code Labels per sheet Quantity 6x15 GM38040 135 2700 7x10 GM38041 169 3380 7x20 GM38042 78 1560 8x17 GM38043 77 1540 8x20 GM38044 66 1320 9x15 GM38045 80 1600 9x20 GM38046 60 1200 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 31
VRT 17.5 MODULAR LEGEND MARKERS VRT 17.5 marker strips may be printed with up to 24 texts for 17.5mm modular components. Material: Rigid PVC, self extinguishing according to class V2 (UL94), thickness, 1.0 mm Use: RTR-TAP & RTA- TAP legend rails pg.39 suitable surfaces. Print with: PS-PLM GM990699-5 support templates VRT 17.5 Legends Size mm Code N of modules Quantity white 15x430 GM19159 24 30 yellow 15x430 GM19154 24 30 VRT 17.5 Self adhesive Legends white 15x430 GM19059 24 30 yellow 15x430 GM19054 24 30 32 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
MARKING SYSTEM ACCESSORIES To complete, enhance and protect the installation of MARKINGenius, PLOT SYSTEM and ROLLY 1000 identification and labeling media, select the appropriate transparent holders for wire and cable markers, push button and pilot legend bases, legend mounting rail, marker and label plates and legend strip covers. Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 33
PMF PMF holders are specifically designed to accommodate appropriate sized wire and cables. Material: Plasticized PVC, self extinguishing to class V0 (UL94), free of Cadmium, Lead, Silicon and Teflon. Resistant to alkali, alcohol, acid and many solvents. Temperature Range: -40 C to + 90 C Use with: MG-TPMF Cable tags, 4mm 6 TPM-ROLL Cable tags, 4mm 20 TRANSPARENT HOLDERS for series FLAT cable tags MG-TPMF PMF-00 Wire diameter range:.3-2.2 mm (.01 -.09 ) Wire size:.1 -.5mm 2 (26-20 AWG) Length mm Code Quantity MARKINGenius Rolly1000 10 GM90000 8000 12 GM90010 7000 15 GM90020 6000 PMF-01 Wire diameter range: 2-3.7 mm (.08 -.15 ) Wire size:.5-2.5mm 2 (20-14 AWG) 10 GM90100 6000 12 GM90110 5000 15 GM90120 4000 PMF-02 Wire diameter range: 3.4-4.3 mm (.14 -.17 ) Wire size: 2.5-4mm 2 (14-10 AWG) 10 GM90200 4000 12 GM90210 4000 15 GM90220 3000 PMF-03 Wire diameter range: 4-6.3 mm (.16 -.25 ) Wire size: 4-10mm 2 (10-6 AWG) 10 GM90300 3000 12 GM90310 2000 15 GM90320 2000 PMF-04 Wire diameter range: 6-10 mm (.24 -.39 ) Wire size: 10-25mm 2 (8-4 AWG) 10 GM90400 2000 12 GM90410 1000 15 GM90420 1000 20 GM90440 500 30 GM90470 500 40 GM90490 500 PMF-05 Wire diameter range: 9-15 mm (.35 -.59 ) Wire size: 25-70mm 2 (4-2/0 AWG) 10 GM90500 500 12 GM90510 500 15 GM90520 250 20 GM90540 250 30 GM90570 150 40 GM90590 100 34 PMF-06 Wire diameter range: 14-26 mm (.55-1.02 ) Wire size: 70-240mm 2 (2/0-4/0 AWG) 10 GM90600 500 12 GM90610 250 15 GM90620 250 20 GM90640 100 30 GM90670 100 40 GM90690 100 * It is advisable to select the holder size based on the actual external diameter of the cable rather than its indicative c.s.a, due to variations in insulation thickness and conductor format. Holders can be produced in other lengths on request. Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
PM PM holders are profiled to allow each type to accommodate a range of cable sizes. TRANSPARENT HOLDERS for cable markers MG-TPM, TPM PM-00 Wire diameter range:.3-2.2 mm (.01 -.09 ) Wire size:.1 -.5mm 2 (26-20 AWG) Material: Plasticized PVC, self extinguishing to Length mm Code Quantity MARKINGenius Plot System System Plotter class V0 (UL94), free of Cadmium, Lead, Silicon and Teflon. Resistant to alkali, alcohol, acid and 10 GM50002 2000 many solvents. 12 GM50012 2000 Temperature Range: -40 C to + 90 C 15 GM50022 2000 18 GM50032 1000 Use with: MG-TPM, 4mm 6 TPM tags, 4mm 26 PM-01 Wire diameter range: 2-3.7 mm (.08 -.15 ) Wire size:.5-2.5mm 2 (20-14 AWG) 10 GM50102 2000 12 GM50112 2000 15 GM50122 1000 18 GM50132 1000 PM-02 Wire diameter range: 3.4-4.3 mm (.14 -.17 ) Wire size: 2.5-4mm 2 (14-10 AWG) 10 GM50202 1000 12 GM50212 1000 15 GM50222 1000 18 GM50232 500 PM-03 Wire diameter range: 4-6.3 mm (.16 -.25 ) Wire size: 4-10mm 2 (10-6 AWG) 10 GM50302 1000 12 GM50312 500 15 GM50322 500 18 GM50331 500 PM-04 Wire diameter range: 6-10 mm (.24 -.39 ) Wire size: 10-25mm 2 (8-4 AWG) 10 GM50402 500 12 GM50411 500 15 GM50421 500 18 GM50431 500 PM-05 Wire diameter range: 9-15 mm (.35 -.59 ) Wire size: 25-70mm 2 (4-2/0 AWG) 10 GM50502 150 12 GM50512 125 15 GM50521 250 18 GM50530 250 PM-06 Wire diameter range: 14-26 mm (.55-1.02 ) Wire size: 70-240mm 2 (2/0-4/0 AWG) 10 GM50602 125 12 GM50610 250 15 GM50620 250 18 GM50630 250 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 35
PMF-AC Material: Plasticized PVC, self extinguishing to class V0 (UL94), free of Cadmium, Lead, Silicon and Teflon. Resistant to alkali, alcohol, acid and many solvents. Temperature Range: -40 C to + 90 C TRANSPARENT HOLDERS other mounting formats for series FLAT tags MG-TPMF PMF-AC Self adhesive for surface mounting Length mm Code Quantity MARKINGenius Rolly1000 10 GM66000 5000 12 GM66010 4000 15 GM66020 4000 20 GM66040 4000 Use with: MG-TPMF Cable tags, 4mm 6 TPM-ROLL Cable tags, 4mm 20 PM-AC TRANSPARENT HOLDERS other mounting formats for MG-TPM, TPM, PMP-30 & PML-30 36 Material: Plasticized PVC, self extinguishing to class V0 (UL94), free of Cadmium, Lead, Silicon and Teflon. Resistant to alkali, alcohol, acid and many solvents. PM-AC Length mm Self adhesive for surface mounting width mm Quantity MARKINGenius System Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 Code Plot System Plotter Temperature Range: 10 4 GM51002 1000-40 C to + 90 C 12 4 GM51012 1000 15 4 GM51022 1000 Use with: 18 4 GM51032 1000 MG-TPM, 4mm 6 21 4 GM51042 500 TPM tags, 4mm 20 23 4 GM51052 500 27 4 GM51062 500 30 4 GM51072 500 1000 4 GM51080 10 PM-ET Material: Plasticized PVC, self extinguishing to class V0 (UL94), free of Cadmium, Lead, Silicon and Teflon. Resistant to alkali, alcohol, acid and many solvents. Temperature Range: -40 C to + 90 C Attaches with a standard cable tie. Use with: MG-TPM, 4mm 6 TPM tags, 4mm 20 MG-TAPW, 9mm 12 TAPW, 9mm 30 MG-TAP, 15mm 12 TAP, 15mm 30 PM-ET Tie-on (tie width max 6mm) for longitudinal mounting on cables, hoses, tubes and conduit 12 4 GM53012 500 15 4 GM53022 500 18 4 GM53030 1000 21 4 GM53040 1000 23 4 GM53050 1000 27 4 GM53060 1000 30 4 GM53070 1000 40 4 GM53090 500 20 9 GM54040 1000 35 9 GM54050 500 17 15 GM54000 500 27 15 GM54010 500 49 15 GM54020 250 67 15 GM54030 250
PT PUSH BUTTON LEGEND BASES for 22.5mm manual operators 22.5mm push button legend bases to fit a wide range of popular brands. Type PTO without locators may offer a higher level of protection depending upon installation method. All types have a hole behind the legend for rivet or screw attachment, while PT...A types are adhesive backed. All types can be fitted with a transparent legend cover TAP-CCS GM990521. Material: Polycarbonate, self extinguishing to class V2 (UL 94) Use with: MG-TAP legends, 15x27mm 12 TAP legends, 15x27mm 30 PTS-22 PTS-24 PTO-22 PTR-22 Size 17x30mm with locators, rivet fixing Code Quantity MARKINGenius PLOT SYSTEM black GM34002 100 Size 17x30mm for Telemecanique, rivet fixing black GM68002 100 Size 17x30mm without locators, rivet fixing black GM34802 100 Size 17x30mm with locators, rounded, rivet fixing black GM34102 100 PTSA-22 Size 17x30mm with locators, self adhesive black GM34602 100 PTSA-24 Size 17x30mm for Telemecanique, self adhesive black GM68602 100 PTRA-22 Size 17x30mm with locators, rounded, self adhesive black GM34702 100 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 37
PL LEGEND BASES for general purpose applications PLR legend bases may be fixed to flat surfaces by rivet or in some sizes, by cable tie to tubes, conduits, etc. PLA versions are self adhesive. TAP-CCS transparent covers may be fitted to protect the legends. Material: Polycarbonate, self extinguishing to class V2 (UL94) PLR black Size mm Rivet fixing rectangular legend base Code Marker plate size MG-TAP & TAP mm Quantity MARKINGenius System 17x30 GM34302 15x27 100 17x52 GM34402 15x49 100 17x70 GM34502 15x67 100 Plot System Plotter Use with: MG-TAP legends, 15mm 12 TAP legends, 15mm 30 SELF ADHESIVE PLA black Rivet fixing rectangular legend base 17x30 GM35102 15x27 100 17x52 GM35202 15x49 100 17x70 GM35302 15x67 100 TAP-CCS Use with: PT push button legend bases 37 PL legend bases 38 RT legend rails 39 TRANSPARENT COVERS TAP-CCS Size mm Code Quantity MARKINGenius Rolly1000 15x27 GM990521 360 15x49 GM990522 180 15x67 GM990523 90 38 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
RT LEGEND RAIL & PROTECTIVE COVERS Material: Rigid dielectric high-impact PVC. Lead-free, self extinguishing according to class V2 (UL94), resistant to acid, alcohol, solvents. Non-deformable up to 87 C Use with: MG-TAP legends, 15mm 12 TAP legends, 15mm 30 VRT 17.5 modular legends 32 SELF ADHESIVE RTR-TAP RTA-TAP RT-CCP Pre-drilled rail for 15mm legends black Length mm Code Quantity MARKINGenius System Plot System Plotter 1000 GM990524 25 Self adhesive rail for 15mm legends black 1000 GM990525 25 Protective cover for 15mm legend rail transparent 1000 GM990504 25 RT-CCPS Protective strip for 15mm legend rail transparent 1000 GM990735 25 RTR-TAPW Pre-drilled rail for 9mm legends Use with: MG-TAPW legends, 9mm 12 TAPW legends, 9mm 30 SELF ADHESIVE RTA-TAPW black Length mm Code Quantity MARKINGenius System Plot System Plotter 1000 GM990526 25 Self adhesive rail for 9mm legends black 1000 GM990527 25 RT-CCW Protective cover for 9mm legend rail transparent 1000 GM990507 25 RT-CCWS Protective strip for 9mm legend rail transparent 1000 GM990734 25 Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160 39
PROPER SIZING OF YOUR TERMINAL BLOCK MARKERS Terminal Block Strip Markers Single Markers STRIP Strip markers use: Marker width = Clip width Marker pitch = Clip pitch PITCH Single markers use: Marker width = Clip width Marker pitch = Clip pitch COMPATIBLE TO PITCH Single markers use: Marker width < Clip width Marker pitch = Clip pitch SINGLE Single markers use: Marker width = Clip width Marker pitch = Clip pitch COMPATIBLE Single markers use: Marker width < Clip width Marker pitch = Clip pitch 40 Due to the continuous development of terminal blocks if you have a marking or labeling need not listed in this catalog please contact ASI for application assistance. Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160
Other ASI Products Power Supplies Competitive Equivalent Terminal Blocks Circuit Breakers AC Outlet Modules PLC Interface Relays Industrial Switches Signal Conditioners Ethernet Switches Interface Modules DIN Rail Cutter Sensors, Cables & Boxes For Additional Information and Specifications Go To Automation Systems Interconnect, Inc. P.O. Box 1340 Mechanicsburg, PA 17055 Phone (877) 650-5160