Asset Data Dictionary Definition Document Continuous Flight Auger Piles (CFA) Uniclass Classification

Asset Data Dictionary Definition Document Continuous Flight Auger Piles (CFA) Uniclass Classification

Contents Introduction... 3 Asset Details... 3 Description... 3 Asset Tagging... 3 Attributes... 4 Data drop 1... 4 Data drop 2... 4 Data drop 3... 5 Data drop 4... 5 Performance data... 6 Labelling... 6 Approvals... 6

Introduction Asset Details No current Uniclass code specified Description Asset Tagging This will follow the COBie for all definitions and will be used to identify the asset in both the physical and virtual worlds

Attributes Data drop 1 This is the minimum level of information required to make decisions in relation to requirements, surveys and constraints. Ground conditions N/A Desk top survey or factual report Existing site use and history N/A Desk top survey or factual report. Surface and sub-surface buildings and infrastructure. Proposed development kn/ m Conceptual design including superstructure and substructure details. Site restrictions N/A Known specific constraints that would impact CFA piling (headroom, vibration) Data drop 2 This is the minimum level of information required to assure the client has the right data for the outline solution. Ground conditions AGS data Site investigation information in AGS format. (strata levels/ strength/ permeability/ stiffness parameters) Site details Factual information on surface and subsurface structures, services and potential obstructions. Site restrictions CFA pile details (Engineer Design) CFA pile details (Contractor Design) Retaining wall kn / mm Known limitations to CFA piling. Number / Diameter/ length/ reinforcement / material specification in the format of FPS electronic pile schedule. Loading information and scope of works (live/ dead/ wind/ lateral/ moment). Supplied in FPS electronic pile schedule format. Excavation level, loading information (surcharge/ structural), permanent propping levels.

Specification Project specific deflection or tolerance limits Data drop 3 This is the minimum level of information required for the contractor and supply chain to deliver and/or construct the asset. Ground conditions AGS data Site investigation information in AGS format. (strata levels/ strength/ permeability/ stiffness parameters). Site details Factual information on surface and subsurface structures, services and potential obstructions. Co-ordinated drawings. Site restrictions Known limitations to CFA piling. CFA pile details kn / mm Number / Diameter/ length/ reinforcement / material specification in the format of FPS electronic pile schedule. Construction drawings and fabrication drawings. Retaining wall m Excavation level, loading information (surcharge/ structural), permanent propping levels. Specification Project specific deflection or tolerance limits Data drop 4 This is the minimum level of information needed to operate and maintain this asset. Pile diameter mm Pile length m Pile reference number Construction record n/a C5 and C6 from BS EN 1536 2010. Reinforcement details Main steel size, length,number of bars, lap details. Pile centreline co-ordinates Pile loading (kn) The load the pile has been

Testing carried out on pile designed to. Load test or integrity test Performance data Any long term monitoring installed within the pile Labelling This will define where and how the asset is labelled. Approvals Industry sector Representative Comments Road Rail Power Water Government