Selector Switch Type 0 Compact positions selector switch,000 switching cycles with up to.0 Ncm switching torque Gold plated contacts: micron Robust metal housing with metal shaft Optional IP front panel sealing Operating temperature range: -0 to + C Various options and customization Standard Product Variety Soldering eyelets or pins for PCB From x to x poles/positions per wafer Single or dual wafer 0, or 0 indexing angle Shorting or non-shorting.0,.0 or.0 Ncm switching torque IP0 or IP front panel sealing Configurable end stops Shaft diameter:, or mm Possible Customization Shaft dimensions and shape Bushing dimensions Switching torque Hollow shaft, inner shaft Others Examples of Customization Examples of Customization Interlock function; pull-to-turn Dual concentric version with E Encoder feed through Typical pplications Industrial controls vionics, instrumentation, test systems Medical and audio equipment Rotary Switches
Selector Switch Type 0 Preference Types Selection Chart Indexing ngle 0, Shorting rrangement x, endless rotating 0-0--0 x, endless rotating 0- x 0-0--0 x 0- x 0-0--0 x 0- x 0-0--0 x 0- x 0-0--0 x 0- Indexing ngle 0, Non-Shorting rrangement x, endless rotating 0-0--0 x 0-0--0 x 0-0--0 x 0-0--0 x 0-0--0 Indexing ngle, Shorting rrangement x 0, endless rotating 0-0 0-0-0 x 0 0-0--0 Indexing ngle 0, Non-Shorting rrangement x, endless rotating 0-0 0-0-0 x 0-0--0 x 0-0--0 x 0-0--0 Stop Pins Packaging Unit Order Number 0 pcs. 00-0 pcs. 00- On switches with fixed end-stop, additional stops can be set, by means of a plastic pin, on any position between and the maximum (stop pins to be ordered separately). For other types/options, see type key. Rotary Switches
Selector Switch Type 0 Specifications Mechanical Data Resolution:... positions max. (0 indexing); shorting or non-shorting 0 positions max. ( indexing); shorting positions max. (0 indexing); non-shorting Switching torque (new condition):...0,.0 or.0 Ncm (+/- %), additional wafers may increase switching torque Rotational life:...,000 switching cycles min. Fastening torque of nut:...00 Ncm max. Electrical Data s:...from x to x poles/positions per wafer (max. wafers) Switching mode:...shorting (for 0 and indexing) Non-shorting (for 0 and 0 indexing) Load current:... max. (resistive load) Switching voltage:... VDC max. resistance (new condition):...0 mohms max. Insulation resistance:...0 Ohms min. (contact to contact/housing) Switching capacitance:... pf max. (contact to contact) Dielectric withstanding voltage:...00 VDC during 0 seconds Material Data Shaft:...Stainless steel Bushing:...Nickel silver Housing:...Fiber enforced plastic Nut:...Brass with glossy nickel plating plating:...uco (hard gold); µm Insulation material:...wafer: HF ceramic, rotor: Polybutylene (PBTB) Soldering leads:...lloy copper, uco plated (hard gold) Environmental Data Operating/storage temperature range:...-0 to + C IP sealing:...ip0, optional IP ( bar, hour) shaft/front panel sealing Vibration:...0 Grms max. @ 0 to 000 Hz Flammability:...UL-HB Packaging Sizes Tray:...0 pcs. Soldering Conditions Hand soldering:...0 C max. during s max. Wave soldering:...0 C max. peak temperature during s max. Switching Modes Non-Shorting (break before make) bridge bridge bridge Shorting (make before break) bridge bridge bridge Rotary Switches
Selector Switch Type 0 Drawings SW= Key spanner M x 0, SW0 ø, ø 0, L =, ø, M x 0, SW0 ø, Mounting, 0, 0,, L =, 0, Drilling diagram for 0 indexing angle Drilling diagram for indexing ~,, 0 0 ø, ø, x, Locating lug, Drilling diagram view from the shaft end 0 x0, Locating lug x0, endless rotating 0 Drilling diagram for 0 indexing angle Special Shaft Diameter Front-panel cut out mm mm,,, 0, 0 x x x B B B B B B B D D D D C B B B C B C C Type 0 switches are also available with the following shaft diameters: Ø L Bushing Nut Size mm mm M x 0. x.0 mm 0 mm mm mm M0 x 0. x.0 mm mm 0 x, x 0 0, x B D B B B D C B D B B C C Hollow Shaft System 0,,, 0, Hollow Shaft Hollow shaft to allow concentric operation of either two switches or, for example, a switch and a potentiometer. The inner shaft (Ø mm) must be ordered separately. 0, Inner Shaft Must be ordered separately for switches with hollow shaft. 0, Switches with Drive Shafts It is possible for two switches to be operated individually by concentric shafts on the same mounting. When ordering, the type number of each switch should be given and specified. 0, Rotary Switches
Selector Switch Type 0 Type Key 0 - X X X X - X X X X X X X X Number of Wafers Number of Poles per Wafer Shaft Diameter 0 - mm M - mm N - mm Factory set character Switching Mode - Shorting - Non-shorting Torque -.0 Ncm M -.0 Ncm N -.0 Ncm Factory Set End Stop 00 - Standard - pos. 0-0 pos. 0 - pos. 0 - pos. 0 - pos. 0 - pos. 0 - pos. 0 - pos. 0 - pos. 0 - pos. Shaft Length (L) 000 - mm ( mm shaft) -. mm ( mm shaft) - mm ( mm shaft) xxx - Custom (e.g.. mm = ) Pin Style, IP Sealing 00 - Eyelets 0 - Pins for PCB 0 - Eyelets, IP 0 - Pins for PCB, IP Only available for one wafer versions with or mm shaft diameter. Customized Shaft Length Please state shaft length (L) measured from mounting face (max. L = 0 mm). Rotary Switches