VLSM & IP ADDRESSING EXAMPLE QUESTIONS with answers;



Similar documents
Chapter 3: IP Addressing and VLSM

Configuring Network Address Translation (NAT)

LAN TCP/IP and DHCP Setup

Introduction. Internet Address Depletion and CIDR. Introduction. Introduction

Packet Tracer - Subnetting Scenario 1 (Instructor Version)

Computer Networks. Introduc)on to Naming, Addressing, and Rou)ng. Week 09. College of Information Science and Engineering Ritsumeikan University

TCP/IP Basis. OSI Model

Packet Tracer 3 Lab VLSM 2 Solution

How To Load balance traffic of Mail server hosted in the Internal network and redirect traffic over preferred Interface

Topics. Subnetting. The Basics of Subnetting Subnet Mask Computing subnets and hosts Subnet Routing Creating a Subnet Example of Subnetting 1/37

Document No. FO1101 Issue Date: Work Group: FibreOP Technical Team October 31, 2013 FINAL:

CCNA R&S: Introduction to Networks. Chapter 9: Subnetting IP Networks

Scaling the Network: Subnetting and Other Protocols. Networking CS 3470, Section 1

IP Addressing A Simplified Tutorial

Internetworking and IP Address

Chapter 19 Network Layer: Logical Addressing 19.1

Enabling NAT and Routing in DGW v2.0 June 6, 2012

Variable length subnetting

Pre-lab Preparation: 1. Read thoroughly and prepare the experiment sheet. 2. You must bring a printed copy of this experiment with you to the lab.

CE363 Data Communications & Networking. Chapter 6 Network Layer: Logical Addressing

Source net: Destination net: Subnet mask: Subnet mask: Router Hub

Lab a Basic Subnetting

Wireless Edge Services xl Module 2.0 Update NPI Technical Training June 2007

Part A:Background/Preparation

Internet Protocol Address

WHITE PAPER. Understanding IP Addressing: Everything You Ever Wanted To Know

Chapter 5. IPv4 Addresses. TCP/IP Protocol Suite 1 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

PowerLink Bandwidth Aggregation Redundant WAN Link and VPN Fail-Over Solutions

Advanced IP Addressing

Zarząd (7 osób) F inanse (13 osób) M arketing (7 osób) S przedaż (16 osób) K adry (15 osób)

ICS 351: Today's plan

Subnet + CIDR. Internet Networking recitation #1. 11: , Internet Networking,

This article describes a detailed configuration example that demonstrates how to configure Cyberoam to provide the access of internal resources.

Lab IP Addressing Overview

For extra services running behind your router. What to do after IP change

IP Addressing. and Subnetting. Workbook Version 1.5. Student Name:

Chapter 4 Customizing Your Network Settings

IP Addressing. -Internetworking (with TCP/IP) -Classful addressing -Subnetting and Supernetting -Classless addressing

The Internet/Network Layer

Internet Addresses (You should read Chapter 4 in Forouzan)

ECE 358: Computer Networks. Solutions to Homework #4. Chapter 4 - The Network Layer

Introduction to IP v6

The IP Transmission Process. V1.4: Geoff Bennett

VLSM Static routing. Computer networks. Seminar 5

Table of Contents. Cisco IP Addressing and Subnetting for New Users

IP Subnetting and Addressing

Internet Protocol (IP) IP - Network Layer. IP Routing. Advantages of Connectionless. CSCE 515: Computer Network Programming IP routing

Chapter 3 LAN Configuration

2. IP Networks, IP Hosts and IP Ports

Advanced Topics: IP Subnetting A WHITE PAPER PREPARED FOR ASPE TECHNOLOGY. toll-free:

Computer Networks By Bahaa Q. Al-Mussawi Subnetting Basics Reduced network traffic Optimized network performance Simplified management

How Subnets Work in Practice. Fred Marshall Coastal Computers & Networks

Networking Basics for Automation Engineers

IP Addressing Introductory material.

LAB Configuring NAT. Objective. Background/Preparation

How to Open HTTP or HTTPS traffic to a webserver behind the NetVanta 2000 Series unit (Enhanced OS)

Internet Protocols. Addressing & Services. Updated:

Interconnecting Cisco Network Devices 1 Course, Class Outline

Vocia MS-1 Network Considerations for VoIP. Vocia MS-1 and Network Port Configuration. VoIP Network Switch. Control Network Switch

Table of Contents 1 IP Addressing Configuration 1-1

Basic Network Configuration

Firewall Defaults and Some Basic Rules

Interconnecting Cisco Networking Devices Part 2


Dynamic Host Configuration Protocol (DHCP) 02 NAT and DHCP Tópicos Avançados de Redes

Chapter 4 Customizing Your Network Settings

Computer Networks. Lecture 3: IP Protocol. Marcin Bieńkowski. Institute of Computer Science University of Wrocław

Classful IP Addressing (cont.)

IP addressing. Interface: Connection between host, router and physical link. IP address: 32-bit identifier for host, router interface

Chapter 5 Customizing Your Network Settings

APPENDIX B. Routers route based on the network number. The router that delivers the data packet to the correct destination host uses the host ID.

Internet Working 5 th lecture. Chair of Communication Systems Department of Applied Sciences University of Freiburg 2004

Chapter 2 TCP/IP Networking Basics

Guide to TCP/IP, Third Edition. Chapter 2: IP Addressing and Related Topics

Subnetting IPv4 and IPv6

Setting up D-Link VPN Client to VPN Routers

estadium Project Lab 8: Wireless Mesh Network Setup with DD WRT

Lab#2: IP Addressing and Subnetting

Chapter 9 Monitoring System Performance

Technical Support Information Belkin internal use only

Workstation ARP. Objective. Background / Preparation

1:1 NAT in ZeroShell. Requirements. Overview. Network Setup

PART IV. Network Layer

2. What is the maximum value of each octet in an IP address? A. 28 B. 255 C. 256 D. None of the above

Application Description

(Refer Slide Time: 02:17)

Configuring an IPSec Tunnel between a Firebox & a Check Point FireWall-1

Supporting Multiple Firewalled Subnets on SonicOS Enhanced

configure WAN load balancing

INTERCONNECTING CISCO NETWORK DEVICES PART 1 V2.0 (ICND 1)

How To Configure A Vyatta As A Ds Internet Connection Router/Gateway With A Web Server On A Dspv.Net (Dspv) On A Network With A D

Appendix B Network, Routing, Firewall, and Basics

How To Learn Cisco Cisco Ios And Cisco Vlan

Future Internet Technologies

IP Addressing. IP Addresses. Introductory material.

White Paper Copyright 2011 Nomadix, Inc. All Rights Reserved. Thursday, January 05, 2012

How to Create Subnets To create subnetworks, you take bits from the host portion of the IP address and reserve them to define the subnet address.

Basic IPv6 WAN and LAN Configuration

2.0 Dual WAN Select Dual-WAN, you will see the following screen shot, Figure 0.1(Dual-WAN Screen Shot) Figure 0.1(Dual-WAN Screen Shot)

Configuration Guide. How to Configure SSL VPN Features in DSR Series. Overview

Transcription:

VLSM & IP ADDRESSING EXAMPLE QUESTIONS with answers; 1 Given the network address of 112.44.0.0 and the network mask of 255.255.0.0 Would the two stations with addresses 112.44.22.19/16 and 112.44.23.2/16 be on the same network? 112.44.0.0/16 i.e. 16 bits of network 112.44.0.0 through to 112.44.255.255 112.44.22.19/16 is on the same network as 112.44.23.2/16 2 Workstations with addresses 172.16.22.1/22 and 172.16.23.9/22 share what network and broadcast address? 172.16.22.1/22 i.e. 22 bits of network = 10 bits host 172.16.20.0 through to 172.16.23.255 172.16.20.0/22 is the network 172.16.23.255 is the broadcast address 3 How many network devices can be supported on a single network using network mask of 255.255.240.0? 255.255.240.0 i.e. 20 bits of network = 12 bits host 12 bits will support up to 4094 devices 4 Which of the following devices share the same network; A 192.168.78.25/29 B 192.168.78.23/29 C 192.168.78.33/29 D 192.168.78.38/29 E 192.168.78.41/29 29 bits of network = 3bits of host 3 bits will support 6 hosts in each network Networks would be; 0 8 16 24 32 40 48. Etc. C and D are in the same network (192.168.78.32/29) 5 Which of the following would best support a point to point link A 255.255.255.253 B 255.255.255.0 C 255.255.255.128 D 255.255.255.252 E 255.255.252.0 To support each end of a point to point connection, two addresses are required. i.e. 2 hosts to be supported = 2 bits of host 2 bits of host = 30 bits of network = D (255.255.255.252) addresses would be 0 = network 1 = first connection 2 = second connection 3 = broadcast address

6 Which addresses should not be advertised to the Internet A 172.12.0.1 B 192.168.0.23 C 10.0.78.2 D 127.0.0.1 E 112.56.22.5 Any private addresses (and local addresses) should not be advertised B 192.168.0.23 part of the 192.168.0.0/24 C 10.0.78.2 part of the 10.0.0.0/8 D 127.0.0.1 (loopback address) 7 Given a class B network of 155.44.200.0, what mask could be used to provide 15 networks each supporting 120 users A 255.255.252.0 B 255.255.248.0 C 255.255.240.0 D 255.255.255.128 E 255.255.255.240 120 users would require 7 bits of host address space 7 bits of host = 25 bits of network So we need 15 x 25 bit networks out of the supplied class B 155.44.200.0 155.44.200.128 155.44.201.0 155.44.201.128 155.44.202.0.. etc. with a network mask of 255.255.255.128 Subnet Number = 9 bit (difference between Classfull and host bits) 8 What would be used to share a single public address within a company A NAT B Private Addressing and NAT C Private Addressing and PAT D PAT E VLSM D PAT (Port Address Translation) C Private Addressing and PAT would be correct would be a better answer 9 How many hosts could be supported on a 22 bit network A 22 B 1024 C 4094 D 512 E 1022 E 1022 (22 bits = 1024 less network and broadcast) 10 What is the broadcast address and network for station 192.168.99.77/19 19 bits of network = 13 bits of host network is 192.168.96.0 Broadcast is 192.168.127.255

11 The network 182.16.192.0 with a mask of 255.255.240.0 will support A 256 stations B 1024 stations C 4094 stations D 4096 stations E 1022 stations 255.255.240.0 = 20 bits of network = 12 bits of host 12 bits = 4094 stations (4096 less network and broadcast) 12 What is the broadcast and network address for host 112.48.160.183 255.255.255.192 255.255.255.192 = 26 bits of network = 6 bits of host 112.48.160.128 is the network 112.48.160.191 is the broadcast 13 What is the broadcast and network address for host 222.129.199.222/21 21 bits of network = 11 bits of host 222.129.192.0 is the network 222.129.199.255 is the broadcast 14 What is the zero subnet address where the station address is 164.20.227.6/19 19 bits of network = 13 bits of host 164.20.224.0 is the network 164.20.255.255 is the broadcast the Subnet Number (classfull mask host bits) = 3 bits if all 3 subnet number bits = zero network = 163.20.0.0/19 (called the Zero-Subnet) ** old format if all 3 subnet number bits = one network = 163.20.224.0/19 (called the broadcast subnet) ** old format 15 What will be the source mac address in a packet received from 192.168.0.1 by 192.168.0.244/25 A mac address of 192.168.0.1 B mac address of the 192.168.0.0/25 gateway C mac address of the 192.168.0.128/25 gateway D mac address of gateway for 192.168.0.244 E mac address of gateway for 192.168.0.1 25 bit network = 7 bit host 192.168.0.1 is on different network to 192.168.0.244 traffic between the networks would use the gateway Although several answers are correct C and maybe E, the best answer is D (192.168.0.244 would receive from it s gateway, as we are not sure if it is the same gateway for 192.168.0.1 and/or if there is only one gateway for 192.168.0.244)

16 What single summary address could be used for the following networks; 192.168.32.0/19 192.168.0.0 255.255.240.0 192.168.64.0/18 19 bit network, 20 bit network and a 18 bit network take the shortest network prefix (18 bits) and check that all networks are within. 192.168.0.0/18 would only cover 192.168.0.0 through to 192.168.63.255 - so we need to expand to 17 bit to cover the.64/18 also - Best answer is 192.168.0.0/17 (255.255.128.0) this would cover networks required 192.168.32.0/19 is 192.168.32.0 up to 192.168.63.255 192.168.0.0/20 is 192.168.0.0 up to 192.168.15.255 192.168.64.0/18 is 192.168.64.0 up to 192.168.127.255 i.e. the question calls for cover for the networks 192.168.0.0 up to 192.168.15.255 then a gap from 192.168.16.0 up to 192.168.31.255 and cover for 192.168.32.0 up to 192.168.127.255 -- this is not possible with a single summary, so we have to provide the best fit 192.168.16.0 up to 192.168.31.255 is not required by the question but has to be covered by the summary in order to cover the.64/18 network. Not ideal, but the question ask for a SINGLE SUMMARY therefore this is the best you can do. 17 An ISP supplies a class B network of 136.210.0.0 to an enterprise that requires ten networks each to support 110 users. What is the network mask that would be configured in each workstation and what would be the NetID, Subnet Number? 110 users would need 7 bits of host = 25 bit networks Subnet Number would be 16 7 = 9 bits the class B COULD be split into (9 bits worth) 512 networks We could take the first ten networks to answer the question; NetID = 136.210.0.0 Subnet Number = 9 Networks = 136.210.0.0 136.210.0.128 136.210.1.0 136.210.1.128 136.210.2.0 136.210.2.128 136.210.3.0 136.210.3.128 136.210.4.0 136.210.4.128 each supporting 126 addresses with a mask of 255.255.255.128 networks 136.210.5.0 through to 136.210.255.128 would be free and unused for future use NOTE - the exam wants to see you are not wasting address space and not allocating ALL the address space at this time. Sometimes the question will ask you to divide the given address space into WAN links using /30 and LANs to support n hosts etc.. and will want to see you are able to do so without waste and show that you have thought ahead to allow your organization to expand into the address space. Best practice also states due to broadcast traffic, it is advisable to limit the size of PC user LANs to 1000 - so do not make your LANs too big

18 What destination network address would be seen in a packet leaving an Internet host that was destine for a work station of a company that makes use of NAT to reach the internal network 192.168.10.0/24 ; A 192.168.10.0 B the inside-local address C the inside-global address D the outside-local address E the outside-global address Internal addresses seen inside the company are inside-local addresses and are not sent out to the Internet but are translated into inside-global addresses and sent to the Internet. Outside-global addresses are public and are sent through the Internet. Outside-local addresses are translations of public addresses into private or alternative addresses for use on a private network. Answer an Internet host would be sending a packet to a public address on the Internet i.e. the address seen by the public Internet to represent the private device. the public address may then be translated when it reaches the private company to address the device on the private network. C inside-global address 19 What source network address would be seen in a packet leaving an Internet host that was destine for a work station of a company that makes use of NAT to reach the internal network 192.168.10.0/24 ; A 192.168.10.0/24 B the inside-local address C the inside-global address D the outside-local address E the outside-global address E the outside-global address 20 An ISP supplies a class C network of 236.20.0.0 to an enterprise that requires three networks each to support 37 users. What is the network mask and network address that would be configured in each workstation and what would be the NetID, Subnet Number and Host Numbers? we need 6 bits of host to support the 37 users 6 bits of host = 26 bits of network (255.255.255.192) Subnet Number = 8-6 = 2 bits we can fit 2 bits worth of networks into the class C (4 networks) Network Mask = 255.255.255.192 Network addresses would be 236.20.0.0/26 236.20.0.64/26 and 236.20.0.128/26 with 236.20.0.192/26 free NetID remains 236.20.0.0 Subnet Number = 2 21 On network 10.210.44.0/22 with a gateway address of 10.210.46.1 What mac address would be seen in a packet leaving a workstation destine for 10.210.45.254 as the destination? 10.210.45.254 is on the 10.210.44.0/22 network destination mac would be seen of 10.210.45.254

22 Station addressed 10.210.46.112/21 with a gateway address of 10.210.46.1 What would be the destination mac address of a packet destine for 10.210.49.2 ; A mac address of 10.210.49.2 B mac address of 10.210.46.1 C mac address of 10.210.46.0/21 D unable to determine As the destination is not on the local 10.210.32.0/21 network, The packet would be sent via the gateway. B 23 A station with address 10.210.46.33/21 and gateway address of 10.210.46.1 What would be the destination mac address of a packet destine for 10.210.47.2 ; A mac address of 10.210.47.2 B mac address of 10.210.46.1 C mac address of 10.210.44.0/21 D unable to determine A as they are on the same local network 24 Given the network 244.10.10.0/25 Select an addressing scheme to support 20 loopback addresses and addresses for 5 point to point links with room for expansion in either direction. Loopbacks need only one address (255.255.255.255 mask) = 1bit Point to point links need 2 addresses (255.255.255.252 masks) = 2 bits Loopback addresses 244.10.10.1/32 244.10.10.2/32 244.10.10.3 etc. Point to point addresses 244.10.10.236/30 244.10.10.240/30 244.10.10.244/30 244.10.10.248/30 244.10.10.252/30 25 On network 192.168.33.192/26 a station is configured with an address of 192.168.33.220/26 and a gateway address of 192.168.33.180 What problems, if any, would be seen? The gateway address is not on the local network. The station would not be able to send traffic beyond the local network. 26 On network 10.210.46.0/25 a station is configured with an address of 10.210.46.11, mask of 255.255.255.0 and a gateway address of 10.210.46.37 What problems, if any, would be seen? Network masks are not equal. If it exists, the 10.210.46.128/25 network would not be reachable from the workstation as the gateway is only used for networks outside of the full 24 bit network (255.255.255.0).