LY Series CNC Turning Center with YAxis
Technical Leader The CNC Turning Center Series, developd by Hyundai Wia, a Korean manufacturer of traditional machine tools, on the strength of its accumulated knowhow and stateoftheart technology, is designed to maximize productivity by taking into account the need for high speed, sturdiness and accuracy. ITEM Spindle Turret 6 8 10 5 6 VDI 30 VDI 40 YAxis Tail Stock L150Y L150SY L200Y L200SY L250Y L250SY
Integrated Machine Tool with High AccuracyCrossply Yaxis LY Series Crossply Yaxis spindle enables for various high accuracy processing spindle with angular ball bearing for high stiffness and low thermal emission Integrated processing through implementation of sub spindles (L150/200/250SY) VDI tool shelf for fast and convenient tool exchange. Front loading box guideway for heavy duty cutting (L250Y/SY) Improved maintenance through lubrication mechanism in the front
01 LY Series L150/200SY Basic Features Which Can Cover All Machining Process with Only One Initial Setting 01 Roller Type LM Guide The adjustable speed on The L150/200SY Series uses roller guideways that are sturdy as well as feature adjustable speed on feed mechanism which reduces idle time. YAxis : Ball Type LM Guide Spindle 02 The main spindle has become sturdier by enlarging its diameter and thickness. Its sturdiness and accuracy are maintained by the highaccuracy angular ball bearings that have been adopted. Ball Screw All axis are driven by large diameter, high precision doublenut ball screws. The double pretension design provides outstanding positioning and repeatability with virtually no thermal growth. All ball screws are connected directly to the servo drive motors without gears or belts, to eliminate backlash. VDI Turret The VDI turret secures tools with a single bolt, allowing for quick and easy changes of cutting tools. Additionally, I.D. and O.D. tools can be placed in any position, adding increased flexibility. 03 5 Spindle Overall improved integrated processing through implementation of 5 sub spindles on L150/200SY Series, realizing a perfect harmony of Yaxis, at the same time improving integrated processing. 04
Basic Features Mill Turret (L150SY) : VDI 30 Mill Turret (L200SY) : VDI 40 02 03 01 04 LY Series YAxis Turning Center MACHINE TOOL 04 + 05 Reduction of noncutting time by fast rapid speed Rapid Travel (X/Y/Z/ZB axis) L150Y L200Y : 36/10/36 m/min (1,417/394/1,417 ipm) L150SY L200SY : 36/10/36/30 m/min (1,417/394/1,417/1,181 ipm) Travel (X/Y/Z/ZB axis) L150Y L200Y : 220/80(±40)/550 mm (8.6 /3.1 (±1.6 )/21.6 ) L150SY L200SY : 220/80(±40)/550/750 mm (8.6 /3.1 (±1.6 )/21.6 /29.5 ) Spindle Speed L150SY : 6,000, 6,000 r/min L200Y : 4,000 [4,000] r/min L200SY : 4,000, 6,000 r/min Spindle Motor (Max/Cont.) SpindleTorque (Max/Cont.) L150SY : 11/7.5, 3.7/2.2 kw ( 14.7/10, 4.9/2.9 HP) L200Y : 15/11 [22/18.5] kw (20.1/14.7 [29.5/24.8] HP) L200SY : 15/11, 3.7/2.2 kw ( 20.1/14.7, 4.9/2.9 HP) L150SY : 70/47.7, 26.2/14 N. m ( 51.6/35.2, 19.3/10.3 lbf.ft) L200Y : 286.6/210.2 [252/211.9] N. m (211.3/155.0 [185.9/156.2] lbf.ft) L200SY : 286.6/210.2, 26.2/14 N. m ( 211.4/155.0, 19.3/10.3 lbf.ft)
02 LY Series L250SY Basic Features Which Can Cover All Machining Process with Only One Initial Setting 01 Box Guideway The X and Z axes on L250SY Series feature sturdy box guideways to reduce vibration during operation, allowing for high precision for heavy cutting. ( YAxis : LM Guide) Spindle The main spindle has become sturdier by enlarging its diameter and thickness. Its sturdiness and accuracy are maintained by the highaccuracy angular ball bearings that have been adopted. 02 Ball Screw All axis are driven by large diameter, high precision doublenut ball screws. The double pretension design provides outstanding positioning and repeatability with virtually no thermal growth. All ball screws are connected directly to the servo drive motors without gears or belts, to eliminate backlash. VDI Turret The VDI turret secures tools with a single bolt, allowing for quick and easy changes of cutting tools. Additionally, I.D. and O.D. tools can be placed in any position, adding increased flexibility. 03 6 Spindle The 6 sub spindle on L250SY features close integration with the Yaxis improves processing. 04
Basic Features Mill Turret : VDI 40 03 MACHINE TOOL 02 01 04 LY Series YAxis Turning Center 06 + 07 Powerful & High Precision Cutting Capability Rapid Travel (X/Y/Z/ZB axis) L250Y : 20/10/24 m/min (787/394/945 ipm) L250SY : 20/10/24/20 m/min (787/394/945/787 ipm) Travel (X/Y/Z/ZB axis) L250Y : 230/110(±55)/675 mm (9 /4.3 (±2.2 )/26.5 ) L250SY : 230/110(±55)/675/700 mm (9 /4.3 (±2.2 )/26.5 /27.5 ) Spindle Speed : 3,500 [3,500], 6,000 [6,000] r/min Spindle Motor (Max/Cont.) : 22/18.5 [22.2/18.5], 7.5/5.5 [8.4/7] kw ( 29.5/24.8 [29.7/24.8], 10/7.4 [11.2/9.4] HP) SpindleTorque (Max/Cont.) : 238.2/200.3 [240.2/200.1], 60/35 [66.8/55.7] N. m ( 175.6/147.7 [177.1/147.5], 44.2/25.8 [49.3/41.1] lbf.ft)
03 LY Series HighPrecision Spindle Long Lasting High Accuracy & Excellent Performance CNC Turning Center Spindle The gearless spindle has been designed for high precision applications, with features that ensure minimal thermal growth at high speeds or under heavy cutting loads.
Spindle 0.001 Thermally Symmetrical Headstock By enlarging the spindle s diameter and thickness, and using only verified bearings, its rigidity is increased significantly. This contributes to improved durability and provides a high quality surface finish on every finished part. CAxis Control and sub spindles are controlled with Caxis. Contour machining with the C axis is also possible, enabling the operator to machine outer shapes and pockets using live tools and Yaxis. MACHINE TOOL LY Series YAxis Turning Center Spindle L150SY/200SY/250SY also feature sub spindles for integrated processing, satisfying various processing needs with Caxis control. 08 + 09 L150SY/200SY : 5 L250SY : 6 Easy setup of work piece coordinates Work piece Coordinates are easily setup by simply taking an initial light cut. The depth is entered into the control automatically as a parameter, thus providing the coordinates Tail Stock Tailstock installed as standard, is activated by button on Mcode or operation panel, improves work friendship. Especially, for L250Y, quill tailstock is applied to support more heavy product, improves the safety of process. Taper L150Y/200Y : MT#4 (One Tuch Type) L250Y : MT#5 (Quill Type) Quill Dia. L150Y/200Y : Ø56 (2.2 ) L250Y : Ø100 (3.9 )
FANUC Power (HP) L150Y/SY Torque (lbf.ft) Power (kw [HP]) L150Y/SY Torque (N. m [lbf.ft) Power (kw [HP] 14.7 10 51.6lbf.ft (30min) 35.1lbf.ft (Cont.) 14.7HP (30min) 10HP (Cont.) 51.6 35.1 11 [14.7] 7.5 [10] 11kW [14.7HP] (30min) 70N. m [51.6lbf.ft] (30min) 7.5kW [10HP] (Cont.) 47.7N. m [35.1lbf.ft] (Cont.) 70 [51.6] 47.7 [35.1] 15 [20.1] 11 [14.7] 15 286.6N. m [211 210.2N. m [155 0 1,500 Spindle Speed (r/min) 12.9 8.8 6,000 0 1,500 Spindle Speed (r/min) 17.5[12.9] 12 [8.8 6,000 0 500 Power (HP) L250Y/SY Torque (lbf.ft) Power (kw) L250Y/SY Torque (N. m [lbf.ft) 29.5 24.8 175.6lbf.ft (30min) 147.7lbf.ft (Cont.) 29.5HP (30min) 24.8HP (Cont.) 175.6 147.7 22 [29.5] 18.5 [24.8] 22kW [29.5HP] (30min) 238.2N. m [175.6lbf.ft] (30min) 18.5kW [24.8HP] (Cont.) 200.3N. m [147.7lbf.ft] (Cont.) 238.2 [175.6] 200.3 [147.7 0 1,500 Spindle Speed (r/min) 44.2 37.2 6,000 0 1,500 Spindle Speed (r/min) 60 [44.2] 50.5 [37.2] 6,000 L150Y/SY L200Y/SY Power (HP) Torque (lbf.ft) L150Y/SY L200Y/SY Power (kw) Torque (N.m [lbf.ft) L2 Power (kw [HP] 4.9 2.9 17.3lbf.ft (30min) 10.3lbf.ft (Cont.) 4.9HP (30min) 2.9HP (Cont.) 17.3 10.3 3.7 [4.9] 2.2 [2.9] 3.7kW [4.9HP] (30min) 23.5N.m [17.3lbf.ft] (30min) 2.2kW [2.9HP] (Cont.) 14N.m [10.3lbf.ft ] (Cont.) 23.5 [17.3] 14 [10.3] 7.5 [10] 5.5 [7.3] 7. 60N.m [44.2lbf 35N.m [25.8lbf 0 1,500 Spindle Speed (r/min) 4.3 2.5 6,000 0 1,500 Spindle Speed (r/min) 5.9 [4.3] 3.5 [2.5] 6,000 0 1,50
Spindle 1PH8 Spindle Motor Power (kw [HP]) L200Y Torque (N.m [lbf.ft]) MACHINE TOOL 22 [29.5] 18.5 [24.8] 0 252N.m [185.8lbf.ft] (S660%) 22kW [29.5HP] (30min) 211.9N.m [156.2lbf.ft] (Cont.) 18.5kW [24.8HP] (Cont.) 833 3,333 Spindle Speed (r/min) 4,000 252 [185.8] 211.9 [156.2] The characteristics of 1PH8 Series Motors include a maximum concentricity of 10µm(0.39µin), unsurpassed quality and a short operating period, which make them stand out as superb machine tools in quality and performance. LY Series YAxis Turning Center 22.2 [29.7] 18.5 [24.8] Power (kw [HP]) L250Y/SY Torque (N. m [lbf.ft]) 240.2N. m [177.1lbf.ft] (S660%) 240.2 [177.1] 22.2kW [29.7HP] (30min) 200.1N. m [147.5lbf.ft] (Cont.) 200.1 [147.5] 18.5kW [24.8HP] (Cont.) 8.4 [11.2] 7 [9.3] Power (kw [HP]) L250Y/SY 8.4kW [11.2HP] (30min) 66.8N. m [49.2lbf.ft] (S660%) 7kW [9.3HP] (Cont.) 55.7N. m [41lbf.ft] (Cont.) Torque (N. m [lbf.ft]) 66.8 [49.2] 55.7 [41] 10 + 11 60.5 [44.6] 50.5 [37.2] 7.8[5.7] 6.5[4.7] 0 882 Spindle Speed (r/min) 3,500 0 1,200 3,600 Spindle Speed (r/min) 6,000 Machining ability L250SY Spindle (O.D) Spindle (O.D) End Mill Turning Material JIS :S45C(Carbon steel Processing diameter Side cutting depth Spindle rpm Forwarding speed Chip discharge Ø108 (Ø4.25 ) 6 mm (0.23 ) 498 r/mim 0.3 mm/rev (0.011 /rev) 216 in 3 /min Turning Material JIS :S45C(Carbon steel Processing diameter Side cutting depth Spindle rpm Forwarding speed Chip discharge Ø94 (Ø3.7 ) 3 mm (0.118 ) 407 r/mim 0.2 mm/rev (0.007 /rev) 72 in 3 /min Drilling Material JIS :S45C(Carbon steel Spindle rpm Forwarding speed Drill diameter Processing depth Chip discharge 500 r/mim 0.05 mm/rev (0.001 /rev) Ø20 (Ø0.78 ) 10 mm (0.39 ) 10 in 3 /min The above result might be different by types of processing circumstance
04 LY Series YAxis Function High speed, High Accuracy, Highly Reliable VDI Turret Cross Type Yaxis The VDI is controlled by a cross type Yaxis, which offers superior accuracy, By eliminated the need to interpolate the X and virtual Yaxis. The cross type design also enables you to machine features that are offset from the spindles center line, on the face or diameter of the part. XAxis YAxis
YAxis Mill Turret (VDI) Straight Milling Head Angular Milling Head MACHINE TOOL Mill Tool Holder Machining capabilities have been increased with the addition of a Straight Milling Head, which can remove material from the side of the workpiece, and an Angular Milling Head, which can perform I.D. operations. A wide variety of additional tool holders can further enhance the machines with capabilities that include drilling and tapping, among others. LY Series YAxis Turning Center 12 + 13 The 12station heavyduty VDI turret features a 3 piece curvic coupling with powerful hydraulic clamping. This enables LY Series multitasking machines to take heavy cuts while still benefiting from increased tool life. YAxis Machining Side milling Offcenter grooving Offcenter drilling L150/200SY Series Speed : 4,000 rpm Output (Max.) : 2.7 kw (3.6HP) Collet size : Ø20 (3/4 ) (ER32) Live Tool Type : VDI 30/VDI 40 L250SY Series Speed : 4,000 rpm Output (Max.) : 5.5 kw (7.4HP) Collet size :Ø20 (3/4 ) (ER32) Live Tool Type : VDI 40
05 LY Series Smart System Software for Smart Operating and Machining HWPGi F ( Programming Guide i for Fanuc System) (Standard when applying FANUC 31/32i) Realistic 3D solid animation Programming simulation Example of easy programming Easy programming interactively without code Engraving Cycle Programming with only entering text by controlling Caxis
Smart System Faster processing programming and enhanced processing accuracy are possible through Smart System. It also maximizes productivity through equipment monitoring and environmentfriendly software. MACHINE TOOL HWeDNC ethernet Direct Numerical Control HWMCG Machine Guidance LY Series YAxis Turning Center This software transmits and receives the CNC of processing equipment, the processing program and the NC data on a PC through the internet or serial communications, while managing the processing program of the CNC memory. NC loading type software offering userconvenience functions like operating equipment, maintenance and monitoring of managing equipment 14 + 15 HWTM Tool Monitoring HWESS Energy Saving System This is an equipmentmonitoring software which checks the overload, attrition and possible damage of equipment by analyzing the spindles and the output load of the feed shaft generated during a processing operation. This is an environmentfriendly power reduction software reducing the standby power unnecessarily wasted in the equipment waiting for a processing operation. HWMMS Machine Monitoring System This software is for remote control monitoring of equipment status (mobile, PC.) It checks and manages the state of multiple pieces of equipment and the progress of processing on a real time basis. USB Port (Only HANDAI WIA FANUC Series) Convenience is increased when inputting and outputting program. Because it is now capable of using USB port in addition to current way like CF memory card or LAN
DIFFERENTIATED CAPABILITIES, INTEGRATED ENGINEERING PERFECTLY INTERLINKED SIEMENS 828D is a latest model CNC that is capable of installing a maximum of 6 spindles. It is designed for horizontal/vertical allpurpose equipment. Through a 80bit control, it makes possible reduction of processing time and enhancement of productivity. It supports the preparation of a variety of programs and setup functions. It is easy to handle. SIEMENS Technology SIEMENS Communication Function Shop Turn Dialoguetype programming, simple and convenient Effective specifications for small quantity batch production Stepbystep operation possible without knowledge of the DIN/ISO code Variable Communication Port RJ 45 Ethernet USB 2.0 Compact Flash Card 3D Simulation 3dimensional (3D) confirmation (an option) of the completed processing configuration of the NC program is possible. Offers standards for 2dimensional simulation (2D.) Possible to confirm the simulation of the NC grogram during processing. Easy Extend Easy to install/uninstall an option (Example: barfeeder and chip conveyor, etc.) Possible to install in one motion without revision of individual perimeters. A spate list is unnecessary as option items are indicated with letters. Easy input/output of a program is possible as a USB memory card, a CF memory card and LAN can all be used. ISO Code Programming If the ISO Dialect (G291) is ordered, JISbased Gcode programs can be used. (Standard)
Controller SIEMENS Convenience Function SIEMENS Easy Programming MACHINE TOOL Easy Tool Measuring Easy calculation (automatic and manual) of the offset values of the installed equipment Automatic input of the measured offset values of equipment into the equipment list Work Offset Measuring Supports the function of work offset calculation Automatic application of the measured work offset value as the activated work offset Real Time PLC Monitoring Real time monitoring of PLC programs is possible. Supports the search and cross reference functions. Real time verification of NC variables and PLC interface Input/change of the values of variables Program Guide Simple Program, High Productivity Use of cycle program minimizes program capacity. When cycle variables are input, graphic images are provided. Tool path and simulation of completed cycle program are available. Various configurations can be processed using cycles. LY Series YAxis CNC Turning Center 16 + 17 Block Searching Program can be restarted from a particular location without editing the processing program. Provides safety to the user. Alarm Log A maximum of 500 alarms can be stored. The entire alarm log can be stored as a data file in the NC The overall alarm history can be checked through the alarm log. Engraving Cycle Simple Letter Processing is Possible. Letters can be processed on products by establishing a plane and inputting letters. Letter size/angle/location/direction can be designated. Capital and small letters of English can be processed.
06 LY Series Automatic QSetter User Convenience Various Devices for User Friendly Environment Device Oil Skimmer An oil skimmer can increase coolant and tool life by removing tramp oil contaminants. Cutting tools are calibrated quickly and accurately with the addition of a qsetter. Each tool tip is touched off automatically by program using a sensor that inputs the position automatically. Typically tools can be calibrated easily within 30 seconds. Mist Collector The mist collector catches and removes these particles to reduce the level of hazards in the air and reduce the accumulation of surface contaminates in your facility. Precision Device ZAxis Linear Scale Linear scales increase positioning accuracy and reduce distortion caused by thermal growth, thus ensuring a more accurate finished part Automation System Parts Catcher An optional parts catcher collects finished parts without the need to open the door, adding productivity, especially when a bar feeder is attached
Optional Bar Feeder System MACHINE TOOL Bar Feeder When machining from bar stock, a bar feeder allows for improved efficiency and unattended machining. Long Type 3m (118.1 ) Max load processing capa. Ø42 (1.7 ) Shot Type 1.5m (59.1 ) Max load processing capa. Ø65 (2.6 ) Parts Conveyor Work efficiency is enhanced as the work conveyor automatically conveys the machined objects from the Parts Catcher to the Work Stocker. LY Series YAxis Turning Center Bar Feeder Machining Process 18 + 19 Round Bar Material Bar Feeder Machining Parts Catcher Parts Conveyor
Specifications Standard & Optional : Standard : Option : Prior Consultation Non Application Spindle L150Y/SY L200Y/SY L250Y/SY Safety Device L150Y/SY L200Y/SY L250Y/SY 6 Door InterLock Spindle 8 Total Splash Guard Hollow Chuck 3 Jaw 10 Chuck Pressure Failure Detector 12 Back Spin Torque Limiter (BST) 6 Torque Limiter Spindle 8 Electric Device Solid Chuck 3 Jaw 10 Call Light 1 Color : 12 Call Light 3 Color : Spindle 5 SY SY Call Light & Buzzer 3 Color : B Hollow Chuck 3 Jaw 6 SY Electric Cabinet Light Spindle Solid Chuck 3 Jaw 5 6 SY SY SY Spindle Load Meter FANUC SIEMENS / Standard Soft Jaw (1set) Chuck Clamp Foot Switch Spindle Speed Meter FANUC SIEMENS / 2 Steps Hyd, Pressure Device Work Counter Digital Spindle Inside Stopper Total Counter Digital 5 Index Tool Counter Digital CsAxis (0.001 ) 2 Steps Chuck Foot Switch Multi Tool Counter 6ea 9ea Chuck Open/Close Confirmation Device Electric Circuit Breaker Spindle Foot Switch Turret SY SY SY ABS Encoder FANUC SIEMENS / Tool Holder AVR(Auto Voltage Regulator) Mill Turret Radial 25kVA Y Straight Milling Head Angular Milling Head Collet Type,2ea Collet Type,2ea Collet Type,1ea Y Y Y SY SY SY Transformer 30kVA 35kVA 40kVA SY Y SY SUB Angular Milling Head Collet Type,1ea SY SY SY Auto Power Off Straight Milling Head Adapter Type Measurement Angular Milling Head Adapter Type QSetter SUB Angular Milling Head Boring Sleeve Drill Socket UDrill Holder Adapter Type Automatic QSetter Work Close Confirmation Device (Only for Special Chuck) Work Setter TACO SMC SY SY SY UDrill Holder Sleeve Linear Scale Z Axis Swivel Head Coolant Level Sensor (Only for Chip Conveyor) Tail Stock & Steady Rest Environment One Touch Tail Stock Y Y Air Conditioner Quill Type Tail Stock Y Dehumidifier BuiltIn Tail Stock Y Oil Mist Collector Programable Tail Stock Y Oil Skimmer (Only for Chip Conveyor) Manual Type Hyd. Steady Rest Y MQL (Minimal Quantity Lubrication) Standard Live Center Y Y Y Fixture & Automation High Precesion Live Center 2 Steps Tail Stock Pressure System Y Y Y Y Y Y Auto Door Standard High Speed Tail Stock Foot Switch Y Y Y Auto Shutter (Only for Automatic System) Quill Forward/Reverse Confirmation Device Y Operation Pannel Coolant & Air Blow Bar Feeder Interface Standard Coolant (Nozzle) Bar Feeder (FEDEK) Chuck Coolant (Upper Chuck) Extra MCode 4ea Gun Coolant Automation Interface Spindle Thru Coolant (Only for Special Chuck) Chuck Air Blow (Upper Chuck) I/O Extension (IN & OUT) 16Contact 32Contact Spindle Air Blow Tail Stock Air Blow (Upper Tail Stock) SY SY SY Y Y Y Parts Catcher SP. SP. SY SY SY Turret Air Blow Spindle Work Pusher (Spring Type) SY SY SY Air Gun Turret Work Pusher (For Automation) Spindle Thru Air Blow (Only for Special Chuck) Parts Conveyor 6 bar (87 psi) Hyd. Device High Pressure Coolant 20 bar (290 psi) Standard Hyd. Cylinder 70 bar (1,015 psi) Power Coolant System (For Automation) Coolant Chiller Chip Disposal Standard Hyd. Unit 50 bar (725 psi)/ 15l(3.9 gal) 50 bar (725 psi)/ 20l(5.2 gal) Coolant Tank 220l(58.1 gal) 250l(66 gal) S/W Machine Guidance (HWMCG : FANUC) Hinge Chip Conveyor Scraper Special Chip Conveyor (Drum Filter) Standard (180l[47.5 gal]) Swing (200l[52.8 gal]) Tool Monitoring (HWTM : FANUC) DNC Software (HWeDNC : FANUC) Energy Saving System (HWESS : FANUC) Machine Monitoring System (HWMMS : FANUC) ETC Chip Wagon Swing Large Size (290l[76.6 gal]) Tool Box Large Size (330l[87.2 gal]) Customized Customized Color CAD & CAM Need Munsel No. The specifications as above will only serve as a reference.
Specifications External Dimensions unit : L150SY Series L200SY Series 310 (12.2) R500 MACHINE TOOL 1707 (67.2) 3045 (119.9) 4304 (169.4) Right Side Chip Conveyor 280 (11) LY Series YAxis Turning Center 1110 (43.7) 750 (29.5) 1185 (46.7) L200Y/SY 708 (27.9) (SPINDLE) L150Y/SY 717 (28.2) Right Side Chip Conveyor 33 (1.3) 20 + 21 1200 (47.2) 3045 (119.9) 638 (25.1) 479 (18.9) SPINDLE CENTER 1117 (44) 4306 (169.5) 1235 (52.2) DOOR OPEN 905 (35.6) 49 (1.9) 1327 (52.2) 1707 (67.2) 380 (15)
Specifications External Dimensions unit : L250SY Series 2216 (87.2) 1945 (76.6) 500 (19.7) 240 (9.4) R500 3461 (136.3) 1278 (50.3) 3221 (126.8) 478 (18.8) 3461 (136.3) 1278 (50.3) 1950 (76.8) 1127 (44.4) 2216 (87.2) 1058 (41.7) 1200 (47.2) 487 (19.2) 1423 (56)
Specifications Tooling System unit : L150/200SY Series Straight Mill Holder Angular Mill Holder Angular Mill Holder VDI 30 12 Stations L150Y/SY VDI 40 12 Stations L200Y/SY MACHINE TOOL LY Series YAxis Turning Center 22 + 23 Tooling Parts Detail ITEM L150Y L150SY L200Y L200SY O.D Holder Right/Left 4 2 2 2 Turning Holder O.D Holder 2 Facing Holder 2 2 2 2 Boring Holder I.D Holder Single 2 2 2 2 Straight Mill Holder Standard 2 2 2 2 Driven Holder Angular Mill Holder Standard Standard () 2 2 2 1 1 1 Ø8 (5/16 ) 1 1 1 1 Ø10 (3/8 ) 1 1 1 1 Ø12 (1/2 ) 1 1 1 1 Boring Ø16 (5/8 ) 1 1 1 1 Socket Ø20 (3/4 ) Ø25 (1 ) 1 1 1 1 1 1 1 1 Ø32 (1 1/4 ) 1 1 Drill MT 1 x MT 2 MT 2 1 1 1 1 1 1 1 1 ER Collet 1 Set 1 Set 1 Set 1 Set Specifications are subject to change for improvement without notice.
Specifications Tooling System unit : L250SY Series Straight Mill Holder Angular Mill Holder VDI 40 12 Stations Angular Mill Holder Tooling Parts Detail ITEM L250Y L250SY O.D Holder (Right/Left) (Right/Left) 4 2 2 Turning Holder Facing Holder 2 1 1 Boring Holder I.D Holder Single 2 1 1 Straight Mill Holder Standard 2 2 Driven Holder Angular Mill Holder Standard Standard () 2 1 1 Ø8 (5/16 ) 1 1 Ø10 (3/8 ) 1 1 Ø12 (1/2 ) 1 1 Boring Ø16 (5/8 ) 1 1 Socket Ø20 (3/4 ) Ø25 (1 ) 1 1 1 1 Ø32 (1 1/4 ) 1 1 Drill MT 1 x MT 2 MT 2 1 1 1 1 ER Collet 1 Set 1 Set Specifications are subject to change for improvement without notice.
Specifications Interference unit : Ø204.5 (8.1) Ø344 (13.5) (9.6) Ø245 Ø240 (9.4) Ø204.5 (8.1) Ø620 (24.4) 135 (5.3) 100 (3.9) 200 (7.9) 30 (1.2) 65 172 (2.6) (6.8) 402 (15.8) 48 (1.9) LY Series YAxis Turning Center Ø20 (0.8) 100 (3.9) MACHINE TOOL L150SY 103.2 (4.1) 89 (3.5) Ø244 (9.6) L200SY 24 + 25 Ø620 (24.4) Ø241 (9.5) Ø246 (9.7) Ø40 (1 1/2) 220 (8.7) 160 (6.3) 85 122 (4.8) 98 (3.3) 35 (1.4) (3.9) 402 (15.8) (6.1) Ø281 (11.1) Ø20 (0.8) (12.2) Ø276 (10.9) Ø680 (26.8) Ø250 (9.8) L250SY 103.2 (4.1) Ø310 (12.2) Ø276 (10.9) Ø40 (1 1/2) Ø293 (11.5) (6.1) (1.4)(3.3) (7.5) (18.3)
Specifications Tooling Travel Range unit : L150SY
Specifications Tooling Travel Range unit : L200SY (1.65)(2.1) (21.65) (1.65)(2.6) (21.65) MACHINE TOOL (1.65) (7.19) (3.86) (4.8) (0.75) (0.16) (2.81) (5.04) (13.1) (0.39) (1.36) (6.4) (21.65) (19.5) (0.69) (3.07) (5.6) (0.75) (2.81) (5.04) (13.1) (21.65) (1.65)(1.67) (6.7) (1.06) (0.69) LY Series YAxis Turning Center (2.17) (0.89) (1.36) (3.54) (4.8) (1.34)(2.64) (3.11) (16.56) (1.06) (4.74) (0.2) (0.49) (3.07) (5.6) (0.75) (0.16) (2.81) (5.04) (13.1) (6.7) 26 + 27 (0.9) (21.65) (0.16) (0.75) (3.07) (5.59) (1.65) (13.47) (15.59) (3.58) (0.16) (4.33) (2.32) (5.59) (5.41) (2.34) (1.06) (0.69) (1.65) (4.33) (21.65) (1.24) (4.42) (3.5) (0.75) (0.16) (2.81) (5.04) (13.1) (6.4) (1.36) (0.69) (2.81) (5.04) (13.1) (6.48) (0.69) (0.33) (3.44) (10.56) (1.27)
Specifications Tooling Travel Range unit : L250SY
Specifications Tooling Travel Range unit : L250SY MACHINE TOOL LY Series YAxis Turning Center 28 + 29
Specifications Specifications [ ] : Option ITEM L150Y L150SY CAPACITY Spindle Feed turet live tool tail Stock tank cpapcity power Suply Machine NC Swing Over the Bed Swing Over the Carriage Max. Turning Dia. Max. Turning Length Bar Capacity Chuck Size Spindle Bore Spindl Speed (rpm) Motor (Max/Cont.) Torque (Max/Cont.) Spindle Type Spindle Nose Caxis Indexing X/Y Travel Z/ZB X/Y Rapid Travel Z/ZB Slide Type No. of Tool OD Tool Size ID Indexing Time YAxis Type Motor Milling Tool Speed (rpm) Touque Collet Size Type Taper Quill Dia. Quill Travel Travel Coolant Tank Lubricating Tank Electric Power Supply Thickness of Power Cable Voltage Floor Space (L W) Height Weight Controller r/min r/min kw(hp) kw(hp) N. m(lbf.ft) N. m(lbf.ft) deg m/min (ipm) m/min (ipm) EA sec/step kw(hp) r/min N. m(lbf.ft) l(gal) l(gal) kva Sq (AWG) V/Hz kg(lb) Ø550 (21.7 ) Ø350 (13.8 ) Ø240 (9.4 ) 530 (20.9 ) Ø45 (1.8 ) Ø33 (1.3 ) Ø169 (6.7 ) Ø135 (5.3 ) Ø53 (2.1 ) Ø43 (1.7 ) 6,000 6,000 11/7.5 (15/10) 3.7/2.2 (5/3) 70/47.7 (51.6/35.2) 23.5/14 (17.3/10.3) BELT BELT A25 FLAT Ø110 (4.3 ) 0.001 220/80 {±40} (8.7 /3.1 {±1.6 }) 550 (21.7 ) 550/750 (21.7 /29.5 ) 36/10 (1,417/394) 36 (1,417) 36/30 (1,417/1,181) LM GUIDE 12 20 (3/4 ) Ø32 (1 1/4 ) 0.3 Perpendicular Type 2.7 (3.6) 4,000 12 (8.8) Ø20 (3/4 ) ER32 VDI30 MT#4 Ø56 (2.2 ) 720 (28.3 ) 250 (66) 1.8 (0.5) 19 23 OVER 25 (3) 220/60 (200/50) 3,045 1.705 (119.9 67.1 ) 2,021 (79.6 ) 4,400 (9,700) 4,500 (9,921) FANUC 32iA FANUC 31iA Specifications are subject to change for improvement without notice.
Specifications Specifications [ ] : Option ITEM L200Y L200SY CAPACITY Spindle Feed turet live tool tail Stock tank cpapcity power Suply Machine NC Swing Over the Bed Swing Over the Carriage Max. Turning Dia. Max. Turning Length Bar Capacity Chuck Size Spindle Bore Spindl Speed (rpm) Motor (Max/Cont.) Torque (Max/Cont.) Spindle Type Spindle Nose Caxis Indexing X/Y Travel Z/ZB X/Y Rapid Travel Z/ZB Slide Type No. of Tool OD Tool Size ID Indexing Time YAxis Type Motor Milling Tool Speed (rpm) Touque Collet Size Type Taper Quill Dia. Quill Travel Travel Coolant Tank Lubricating Tank Electric Power Supply Thickness of Power Cable Voltage Floor Space (L W) Height Weight Controller r/min r/min kw(hp) kw(hp) N. m(lbf.ft) N. m(lbf.ft) deg m/min (ipm) m/min (ipm) EA sec/step kw(hp) r/min N. m(lbf.ft) l(gal) l(gal) kva Sq (AWG) V/Hz kg(lb) Ø550 (21.7 ) Ø350 (13.8 ) Ø240 (9.4 ) 530 (20.9 ) Ø65 (2.6 ) Ø33 (1.3 ) Ø210 (8.3 ) Ø135 (5.3 ) Ø78 (3.1 ) Ø43 (1.7 ) 4,000 4,000 6,000 15/11 (20/15) [22/18.5(29.5/24.80] 15/11 (20/15) 3.7/2.2 (5/3) 286.6/210.2(211.3/155) 286.6/210.2 (211.4/155) [252/211.9(185.9/156.2)] 23.5/14 (17.3/10.3) BELT BELT A26 FLAT Ø110 (4.3 ) 0.001 220/80 {±40} (8.7 /3.1 {±1.6 }) 550 (21.7 ) 550/750 (21.7 /29.5 ) 36/10 (1,417/394) 36 (1,417) 36/30 (1,417/1,181) LM GUIDE 12 25 (1 ) Ø40 (1 1/2 ) 0.28 Perpendicular Type 2.7 (3.6) 4,000 12 (8.9) Ø20 (3/4 ) ER32 VDI 40 MT#4 Ø56 (2.2 ) 720 (28.3 ) 250 (66) 1.8 (0.5) 22 26 OVER 25 (3) 220/60 (200/50) 3,045 1.705 (119.9 67.1 ) 2,021 (79.6 ) 4,500 (9,921) 4,600 (10,141) FANUC 32iA [SIEMENS 828D] FANUC 31iA MACHINE TOOL LY Series YAxis Turning Center 30 + 31 Specifications are subject to change for improvement without notice.
Specifications Specifications [ ] : Option ITEM L250Y L250SY CAPACITY Spindle Feed turet live tool tail Stock tank cpapcity power Suply Machine NC Swing Over the Bed Swing Over the Carriage Max. Turning Dia. Max. Turning Length Bar Capacity Chuck Size Spindle Bore Spindl Speed (rpm) Motor (Max/Cont.) Torque (Max/Cont.) Spindle Type Spindle Nose Caxis Indexing X/Y Travel Z/ZB X/Y Rapid Travel Z/ZB Slide Type No. of Tool OD Tool Size ID Indexing Time YAxis Type Motor Milling Tool Speed (rpm) Touque Collet Size Type Taper Quill Dia. Quill Travel Travel Coolant Tank Lubricating Tank Electric Power Supply Thickness of Power Cable Voltage Floor Space (L W) Height Weight Controller r/min r/min kw(hp) kw(hp) N. m(lbf.ft) N. m(lbf.ft) deg m/min (ipm) m/min (ipm) EA sec/step kw(hp) r/min N. m(lbf.ft) l(gal) l(gal) kva Sq (AWG) V/Hz kg(lb) Ø620 (24.4 ) Ø490 (19.3 ) Ø310 (12.2 ) 620 (24.4 ) Ø76 (3 ) Ø45 (1.8 ) Ø255 (10 ) Ø169 (6.6 ) Ø95 (3.7 ) Ø53 (2.1 ) 3,500 6,000 22/18.5 (30/25) [22.2/18.5 (30/25)] 7.5/5.5 (10/7.4) [8.4/7(11.29.3)] 238.2/200.3(175.6/147.7) [240.2/200.1 (177.1/147.5)] 60/35 (44.2/25.8) [66.8/55.7 (49.3/41.1)] BELT BELT A28 A25 0.001 230/110 {±55} (9.1 /4.3 {±2.2 }) 675 (26.6 ) 675/700 (26.6 /27.6 ) 20/10 (787/394) 24 (945) 24/20 (945/787) BOX GUIDE 12 25 (1 ) Ø40 (1 1/2 ) 0.33 Perpendicular Type 5.5 (7.4) 4,000 30 (22.1) Ø20 (3/4 ) ER32 VDI 40 MT#5 Ø100 (3.9 ) 120 (4.7 ) 750 (29.5 ) 220 (58.1) 1.8 (0.5) 29 37 OVER 35 (1) 220/60 (200/50) 3,202 1,988 (126.1 78.3 ) 2,181 (85.9 ) 6,500 (14,330) FANUC 32iA [SIEMENS 828D] FANUC 31iA [SIEMENS 828D] Specifications are subject to change for improvement without notice.
Controller SIEMENS 828D (L200Y L250Y/SY) Control function Max. configuration of Axis Max. configuration of Axis and sp. Least Command/input Feed function Feedrate Override Rapid Traverse Override Acceleration with jerk limitation Programmable acceleration Followup mode Measuring system 1 and 2, selectable Separate path feed for corners and chamfers Travel to fixed stop Spindle function Spindle Override Spindle Orientation Spindle Speed Limitation Rigid Tapping Interpolation function Linear interpolation Axis Circle via center point and end point Circle via interpolation point Helical interpolation Universal interpolator NURBS (nonuniform rational B splines) Continuouspath mode with programmable rounding clearance Tool function Tool Radius Comp. Zero Offset (G54, G55, G56, G57,G58, G59) Programmable Zero Offset Tool management Display CRT / MDI SCREEN SAVER Manual Operation Manual Handle/Jog Feed Reposition Reference Approach Spindle Control Auto Operation Single Block Feed Hold Optional Block Skip Machine Lock Dry Run Simulation Diagnosis function Alarm Display Spindle Load/rpm Meter PLC status/lad display Program function Part Program Storage Length Program Name routine Call Absolute/incremental Command Scaling, ROT Inch / Metric Conversion Conversational Cycle Program Block Search Variable Program (Macro) Read / Write System Variable BackGround Editing Miscellaneous Functions Lable Skip Program Stop/End Lookahead, Jerk LimitationFeed &forward control 3 Axis(MS / SY exception) 4 Axis(MS / SY machine only) 6 Axis(MS / SY exception) 8 Axis(MS / SY machine only) 0.0001mm / 0.00001inch 0 120% F1, 5, 25/50, 100% 50% 120% Max. 4 axis 100 EA 10.4 Color LCD None Ref 1, 2 Approach Start, Stop, Rev, Jog, Ort. (2 dimensional) 3MB (MS / SY exception) PPU26x.x 5MB (MS / SY machine only) PPU28x.x 23 digit (7 level) G90 G91 (22 Machine) M Code M00, M01, M02, M30 Program function ISO Dialect Interpreter(G291) (Fanuc Program exe) 128/256 (MS / SY exception) PPU26x.x Maximum number of tools/cuttings 256/512 (MS / SY machine only) PPU28x.x Number of levels for skip blocks 1 Protection Function Emergency Stop Over Travel Soft Limit & Hard O.T Contour Monitoring Program Protection Automation Support Fun. Actual Speed Display(Monitor) Tool Life Management (Time, Parts) Work Count Function (Internal) Language Function (6EA) Chinese Traditional, Czech, Danish, Two Language switchable Dutch, Finnish, Hungarian, Japanese, Korean, Polish, Russian, Swedish, Portuguese, Turkish Data Transfer RS 232C I/F / Ethernet USB Memory Stick & CF Card Option Shop Turn 3D Simulation DRF offset Teach in Number of levels for skip blocks 8 TRACYL (Cylinder interpolation) TRANSMIT (Pole coordinate command) Sister Tool A,B,C SPLINE INTERPOLATION RCS HOST (Remote Control) Simultaneous Recording (real time monitoring) Analysis of Internal Drive Values Network Drive Management MACHINE TOOL LY Series YAxis Turning Center 32 + 33 Figures in inch are converted from metric values. Design and specifications subject to change without notice.
Controller FANUC 31iA Axis control / Display unit Controlled axes Simultaneous controllable axes Least input increment Least command increment High speed HRV control Inch / Metric conversion Interlock Machine lock Emergency stop Stored stroke check 1 Stored stroke check 2 Stored stroke check 3 Followup Servooff Backlash compensation Position switch Unexpected disturbance torque detection High resolution transfer control (HRM) LCD / MDI Operation Automatic operation (memory) MDI operation Search function Program restart Wrong operation prevention Buffer register Program check function Single block Feed functions Manual jog feed Manual handle feedrate Feed command Feedrate override Jog override Rapid traverse override Override cancel Feed per minute / rotation Program input & interpolation functions Nano interpolation Dwell Thread retract Variable lead threading 1st reference point return Reference point return check 2nd reference point return Program stop / End Tape code Optional block skip Maximum programmable dimensions Program number Absolute and incremental programming Decimal point input Plane selection Work coordinate system selection Manual absolute Direct drawing dimension programming G code system Programmable data input program call Custom macro B Addition of custom macro common variable Multiple repetitive cycles Multiple repetitive cycles Ⅱ Canned cycles for turning Max. 6 axes are available X, Z axis X, Z, C axis (M type machine) X, Z, B, C, A axis (MS type machine) X, Z, Y, B, C, A axis (SY type machine) 2axeis / Linear and circular (Max. 4axes) X, Z, Y, B axis : 0.001 mm (0.0001 ) C axis : 0.001 deg X, Z, Y, B axis : 0.001 mm (0.0001 ) C axis : 0.001 deg G20 / G21 Each axis / All axis All axis Overtravel +/ 0~9999 pulses(rapid traverse & cutting feed) Backspin torque limiter (BST) 10.4 Color LCD Sequence, program Dry run., program check Rapid, jog, handle x1, x10, x100 F code feedrate direct command 0~200 % (10% units) 0~2,000 mm/min[79 ipm] F1, F5, F25/F50, F100% Positioning/Linear/Circular (G00/G01/G02, G03) G04, 0~9999.9999 sec G28, manual G27 G30 M00, M01 / M02, M30 EIA / ISO 1 ea +/ 9999.9999 O+4 digits G17, G18, G19 G52 to G59 ON fixed Included chamfering / Corner R` A G10 10 Step #100 to #199, #500 to #999 / spindle function MCode function MCode function lock Lock sp. speed command sp. constant control Spindle speed override Spindle position decision Rigid tapping Tool function / Tool compensation Tool function Tool offset pairs Tool offset Tool nose radius compensation Direct input of measured tool compensation value B Tool life management Data in/output & editing functions Input/Output interface Memory card input/output Embeded ethernet Part program storage length Number of registrable programs expansion Memory lock Background editing Extended part program edition Display, diagnosis & setting functions Selfdiagnosis function History display Help function External message Run hour / Parts count display Display of actual spindle speed and T code Actual cutting feedrate display Operating monitor screen Graphic display Spindle / Servo setting screen Selection of 5 optional language LCD screen save Automatic data backup Functions according to machine specification Cs contouring control Stored pitch error compensation Polar coordinate interpolation Cylindrical interpolation Canned cycles for drilling spindle orientation expansion Spindle synchronous control Torque control Option High speed ethernet Optional block skip 3rd & 4th reference point return G code system Part program storage length Tool Offest Poligon Turning Helical interpolation Dynamic graphic display Protection of data at 8 levels Manual guide i Tool Monitoring function M4 digits S4 digits, binary output G96, G97 50% to 150% (10% units) T2 + 2 64 pairs G40, G41, G42 RS232C 100Mbps 256 Kbyte Max. 500 programs Copy, move, change of NC program Alarm & operation display Rod meter light Screen saver Turn mill Turn mill Turn mill Turn mill Turn mill Turn mill, spindle spindle spindle 100 Mbps (Option board is required) 9 ea B / C 512 Kbyte / 1024 Kbyte 99 / 200 / 400 EA Interactive program HWTM (Builtin Fanuc type) Figures in inch are converted from metric values. Design and specifications subject to change without notice.
Controller FANUC 32iA Axis control / Display unit Controlled axes Simultaneous controllable axes Least input increment Least command increment High speed HRV control Inch / Metric conversion Interlock Machine lock Emergency stop Stored stroke check 1 Stored stroke check 2 Stored stroke check 3 Followup Servooff Backlash compensation Position switch Unexpected disturbance torque detection High resolution transfer control (HRM) LCD / MDI Operation Automatic operation (memory) MDI operation Search function Program restart Wrong operation prevention Buffer register Program check function Single block Feed functions Manual jog feed Manual handle feedrate Feed command Feedrate override Jog override Rapid traverse override Override cancel Feed per minute / rotation Program input & interpolation functions Nano interpolation Dwell Thread retract Variable lead threading 1st reference point return Reference point return check 2nd reference point return Program stop / End Tape code Optional block skip Maximum programmable dimensions Program number Absolute and incremental programming Decimal point input Plane selection Work coordinate system selection Manual absolute Direct drawing dimension programming G code system Programmable data input program call Custom macro B Addition of custom macro common variable Multiple repetitive cycles Multiple repetitive cycles Ⅱ Canned cycles for turning Manual guide i Max. 4 axes are available X, Z axis X, Z, C axis (M type machine) X, Z, Y, C axis (Y type machine) X, Z, B, C axis (MS type machine) 2axis / Linear and circular (Max. 4axis) X, Z, Y, B axis : 0.001 mm (0.0001 ) C axis : 0.001 deg X, Z, Y, B axis : 0.001 mm (0.0001 ) C axis : 0.001 deg G20 / G21 Each axis / All axis All axis Overtravel +/ 0~9999 pulses(rapid traverse & cutting feed) Backspin torque limiter (BST) 10.4 Color LCD Sequence, program Dry run., program check Rapid, jog, handle x1, x10, x100 F code feedrate direct command 0~200 % (10% units) 0~2,000 mm/min[79 ipm] F1, F5, F25/F50, F100% Positioning/Linear/Circular (G00/G01/G02, G03) G04, 0~9999.9999 sec G28, manual G27 G30 M00, M01 / M02, M30 EIA / ISO 1 ea +/ 9999.9999 O+4 digits G17, G18, G19 G52 to G59 ON fixed Included chamfering / Corner R` A G10 10 Step #100 to #199, #500 to #999 Interactive program / spindle function MCode function MCode function lock Lock sp. speed command sp. constant control Spindle speed override Spindle position decision Rigid tapping Tool function / Tool compensation Tool function Tool offset pairs Tool offset Tool nose radius compensation Direct input of measured tool compensation value B Tool life management Data in/output & editing functions Reader / Puncher interface Memory card input/output Part program storage length Number of registrable programs expansion Memory lock Background editing Extended part program edition Display, diagnosis & setting functions Selfdiagnosis function History display Help function External message Run hour / Parts count display Display of actual spindle speed and T code Actual cutting feedrate display Operating monitor screen Graphic display Spindle / Servo setting screen Selection of 5 optional language LCD screen save Automatic data backup Functions according to machine specification Cs contouring control Stored pitch error compensation Polar coordinate interpolation Cylindrical interpolation Canned cycles for drilling spindle orientation expansion Spindle synchronous control Torque control Y axis offset Angular axis control Option High speed ethernet Optional block skip 3rd & 4th reference point return G code system Part program storage length Polygon turning Helical interpolation Dynamic graphic display Protection of data at 8 levels Tool Monitoring function M4 digits S4 digits, binary output G96, G97 50% to 150% (10% units) T2 + 2 64 pairs G40, G41, G42 RS232C 256 Kbyte Max. 500 programs Copy, move, change of NC program Alarm & operation display Rod meter light Screen saver Turn mill Turn mill Turn mill Turn mill Turn mill Turn mill, spindle spindle spindle Y type machine Y type machine 100 Mbps (Option board is required) 9 ea B / C 512 Kbyte HWTM (Builtin Fanuc type) MACHINE TOOL LY Series YAxis Turning Center 34 + 35 Figures in inch are converted from metric values. Design and specifications subject to change without notice.
Controller FANUC i Series Control function / Screen display Control axis number Simultaneous control axis number Min. input unit Min. increment High speed HRV control Inch/metric conversion Interlock Machinelock Emergency stop Stroke check 1 Stroke check 2 Stroke check 3 Follow up off Backlash compensation Position switch Fault load detection High resolution transfer control (HRM) LCD / MDI Operation Auto operation (Memory) MDI operation Search function Program restart Preventive function for mishandling Buffer registration Program check function Single block Feed function Manual jog feed Manual handle magnification Feed command Feed override Jog override Rapid transfer override Override release Transfer/minute, transfer/rpm Program input and interpolation function Nano interpolation Dwell function Thread retract Variable lead threading Return of first zero point Return check of zero point Return of second, third, fourth zero point Program stop/over Tape code Optional block skip Max. program enter unit Program number Absolute, incremental programming Decimal number entering Plain selection Work coordinate selection Manual absolute Drawing dimension direct input programming G code system Programmable data input program call Custom macro B Custom macro variable addition Multiple repetitive cycles Multiple repetitive cycles Ⅱ Lathe fixed cycle Max. 4 axes X, Z axis X, Z, C axis (M type machine) X, Z, Y, C axis (Y type machine) X, Z, B, C axis (MS type machine) 2 axis/straight, arc interpolation (Max. 4 axes) X, Z, B axis : 0.001mm (0.0001 ) C axis : 0.001 deg. X, Z, B axis : 0.001mm (0.0001 ) C axis : 0.001 deg. G20 / G21 Each axis / All axis Full axis Overtravel +/ 0~9999 Pulse Back spin torque limiter (BST) 10.4 Color LCD Sequence, Program Dry run, Program check Rapid transfer, Jog, Handle x1, x10, x100 Direct command for F code feed 0~200% (10% units) 0~2,000 mm/min [79 ipm] F1, F5, F25/F50, F100% Positioning/Straight/Arc (G00/G01/G02/G03) G04, 0~9999.9999 sec G28, Manual G27 G30 M00, M01 / M02, M30 EIA / ISO 1 EA +/ 9999.9999 O4 digit number G17, G18, G19 G52 to G59 ON fixed Included chamfering / Corner R` A G10 10 Steps #100 to #199, #500 to #999 / spindle function MCode function MCode function lock sp. speed command sp. constant control Spindle speed override Spindle position decision Rigid tapping Tool function / Tool compensation Tool function Tool offset quantity Tool offset Tool nose radius compensation Configuration/wear compensation Direct input of measuring tool compensation BTool life management Data input, output and editing function Input/output interface Memory card input and output Program storing capacity Program registration quantity Memory lock Background edit Additional expandable edit Screen, diagnosis and setting function Self diagnosis function Historic screen Help function Outside message Operation time/counter display Actual sp. speed, T code display Actual machining feed rate display Handling monitor screen Graphic screen Spindle/servo setting screen Languages LCD screen save Auto data backup Function according with machine specification Cs contouring function Stored pitch error compensation Pole coordinate command Cylinder interpolation Drill fixed cycle Sp. positioning expandable sp. synchronization control Torque control Y axis offset Angular axis control Option High speed Ethernet Optional block skip Return of third, fourth zero point G code system Polygon turning Helical interpolation Dynamic graphic display 8 level data protection function Tool load monitoring function Manual guide i M4 digit number S + 4 digit number, binary number output G96, G97 50% ~ 150% (10% unit) T2 + 2 64 pairs G40, G41, G42 RS232C 512 Kbyte Max. 500 programs NC program copy, move, change Alarm and operation screen Rod meter light Selection of random 5 EA Screen saver Turn mill Turn mill Turn mill Turn mill Turn mill Turn mill, spindle spindle spindle Y type machine Y type machine 100 Mbps (Option board is required) 9 EA B / C HWTM (embedded Fanuc type) Interactive program (10.4 Color LCD) Figures in inch are converted from metric values. Design and specifications subject to change without notice.
Global Network MACHINE TOOL Raunheim Service Center Europe SHENYANG OFFICE BEIJING OFFICE Qingdao OFFICE HEAD OFFICE Shandong hyundai wia Jiangsu WUHAN OFFICE CHENGDU OFFICE GUANGZHOU OFFICE Machine Tools Co. LTD India AMERICA CORP. (L.A Office) America Technical Center AMERICA CORP. (Chicago Office) LY Series YAxis Turning Center Headquarters 153, Jeongdongro, Seongsangu, Changwonsi, Gyeongnam, Korea (Zip Code : 642110) Americas America 265, Spring Lake Drive, Itasca, IL, 60143 L.A. office 11125 Knott Ave. STE B/C Cypress, CA 90630 America Technical center 39205 Country Club Drive Suite C9, Farmington Hills, MI, 48310 Europe Europe Kaiserleipromenade 5, 63067 Offenbach, Germany Raunheim Service Center Frankfurter Strasse 51, 65479 Raunheim, Germany India India 48, Sur.No7880. Kandamangalam Village, Sengadu Post, Sriperumbudur Taluk, Kancheepuram, Tamil Nadu 602 105 China Shandong Company No.188 Shanghai Road, Rizhao City, Shandong Province, China Jiangsu Company No.6, Fenghuang Road, Fenghuang Town, Zhangjiagang City, Jiangsu Province, China Machine Tools Co. LTD 13F, Bldg6, No.1535 Hongmei Road, Xuhui District, Shanghai, China, 200233 China Beijing Office Room 908, Hyundai Motor Building, No.38 Xiaoyun Road, Chaoyang District, Beijing, China 100027 China Guangzhou Office Room 609, No.1 Yingbin Building (Dashi Section) Panyu District, Guangzhou Ctiy, Guangdong, China 511431 China Chengdu Office Room 2103, Block A, Times Plaza, No.2 Zongfu Road, Jinjiang District, Chengdu, China 610016 China Wuhan Office Room 302, B Tower, Donghe Center, Dongfeng Three Toad, Zhuankou, Wuhan, Hubei, China China Qingdao Office Room 1207, Caifu Building, 1826 Haier Middle Road, Qingdao 266061, China China Shenyang Office Room 1304, No.53 Beizhan Road, Shenhe District, Shenyang China 110013 36 + 37
201408 002.002 ENG AMERICA CORP. (Chicago Office) 265, Spring Lake Drive, Itasca, IL, 60143 Tel +1 201 489 2887 Fax +1 201 489 2723 AMERICA CORP. (L.A. office) 11125 Knott Ave. STE B/C Cypress, CA 90630 Tel +1 714 373 5480 Fax +1 714 373 5485 America Technical center 39205 Country Club Drive Suite C9, Farmington Hills, MI, 48310 Tel +1 248 324 1056 Fax +1 248 324 0989 en.wiamachine.co.kr