(F,B)6AT thru (F,B)6JT Dual Common-Cathode Ultrafast Plastic Rectifier TO-0AB 6xT PIN PIN 3 PIN CASE 3 TO-63AB ITO-0AB F6xT PIN PIN 3 PIN 3 FEATURES Glass passivated chip junction Ultrafast recovery time Low switching losses, high efficiency High forward surge capability AEC Q0 qualified Meets MSL level, per J-STD-00, LF maximum peak of 45 C (for TO-63AB package) Solder dip 60 C, 40 s (for TO-0AB and ITO-0AB package) Component in accordance to RoHS 00/95/EC and WEEE 00/96/EC B6xT PIN PIN HEATSIN TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. PRIMARY CHARACTERISTICS I F(AV) 8.0 A x V RRM 50 V to 600 V I FSM 00 A, 5 A t rr 35 ns, 50 ns V F 0.95 V,.30 V,.50 V T J max. 50 C MECHANICAL DATA Case: TO-0AB, ITO-0AB, TO-63AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-00 and JESD-B0 E3 suffix for consumer grade, meets JESD 0 class A whisker test, HE3 suffix for high reliability grade (AEC Q0 qualified), meets JESD 0 class whisker test Polarity: As marked Mounting Torque: 0 in-lbs maximum MAXIMUM RATINGS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL 6AT 6BT 6CT 6DT 6FT 6GT 6HT 6JT UNIT Maximum repetitive peak reverse voltage V RRM 50 00 50 00 300 400 500 600 V Maximum RMS voltage V RMS 35 70 05 40 0 80 350 40 V Maximum DC blocking voltage V DC 50 00 50 00 300 400 500 600 V Maximum average forward rectified current at T C = 00 C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode I F(AV) 6 A I FSM 00 5 A Operating storage and temperature range T J, T STG - 55 to +50 C Isolation voltage (ITO-0AB only) from terminal to heatsink t = min V AC 500 V
(F,B)6AT thru (F,B)6JT ELECTRICAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL Maximum instantaneous forward voltage per diode () 8.0 A V F 0.95.30.50 V 6AT 6BT 6CT 6DT 6FT 6GT 6HT 6JT UNIT Maximum DC reverse current per diode at rated DC blocking voltage T C = 5 C T C = 00 C I R 0 500 µa Maximum reverse recovery time per diode Typical junction capacitance per diode I F = 0.5 A, I R =.0 A, I rr = 0.5 A t rr 35 50 ns 4.0 V, MHz C J 85 60 pf Note: () Pulse test: 300 µs pulse width, % duty cycle THERMAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL F B UNIT Typical thermal resistance from junction to case per diode R θjc. 3.. C/W ORDERING INFORMATION (Example) PACAGE PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE TO-0AB 6JT-E3/45.85 45 50/tube Tube ITO-0AB F6JT-E3/45.97 45 50/tube Tube TO-63AB B6JT-E3/45.35 45 50/tube Tube TO-63AB B6JT-E3/8.35 8 800/reel Tape and reel TO-0AB 6JTHE3/45 ().85 45 50/tube Tube ITO-0AB F6JTHE3/45 ().97 45 50/tube Tube TO-63AB B6JTHE3/45 ().35 45 50/tube Tube TO-63AB B6JTHE3/8 ().35 8 800/reel Tape and reel Note: () Automotive grade AEC Q0 qualified
(F,B)6AT thru (F,B)6JT RATINGS AND CHARACTERISTICS CURVES (T A = 5 C unless otherwise noted) Average Forward Current (A) 0 6 8 4 Resistive or Inductive Load Instantaneous Reverse Leakage Current (µa) 00 0 0. T J = 5 C T J = 5 C T J = 00 C 0 0 50 00 50 Case Temperature ( C) 0.0 0 0 40 60 80 00 Percent of Rated Peak Reverse Voltage (%) Figure. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Per Diode Peak Forward Surge Current (A) 300 50 00 50 00 50 T C = 00 C 8.3 ms Single Half Sine-Wave Junction Capacitance (pf) 000 00 T J = 5 C f =.0 MHz V sig = 50 mvp-p 0 0 00 Number of Cycles at 60 Hz 0 0. 0 00 Reverse Voltage (V) Figure. Maximum Non-Repetitive Peak Forward Surge Current Per Diode Figure 5. Typical Junction Capacitance Per Diode 00 Instantaneous Forward Current (A) 0 T J = 5 C 0. 0. 0.4 0.6 0.8.0..4.6.8.0 Instantaneous Forward Voltage (V) T J = 5 C Pulse Width = 300 µs % Duty Cycle 300-400 V Figure 3. Typical Instantaneous Forward Characteristics Per Diode 3
(F,B)6AT thru (F,B)6JT PACAGE OUTLINE DIMENSIONS in inches (millimeters) 0.45 (0.54) MAX. 0.370 (9.40) 0.360 (9.4) TO-0AB 0.54 (3.9) 0.48 (3.74) 0.3 (.87) 0.03 (.6) 0.85 (4.70) 0.75 (4.44) 0.055 (.39) 0.045 (.4) 45 REF. 0.404 (0.6) 0.384 (9.75) ITO-0AB 0.076 (.93) REF. 0.076 (.93) REF. 0.40 (3.56) DIA. 0.5 (3.7) DIA. 0.90 (4.83) 0.70 (4.3) 0.0 (.79) 0.00 (.54) 0.35 (3.43) DIA. 0. (3.08) DIA. 0.60 (4.06) 0.40 (3.56) 0.057 (.45) 0.045 (.4) 0.05 (.67) 0.095 (.4) PIN 3 0.635 (6.3) 0.65 (5.87) 0.035 (0.90) 0.08 (0.70) 0.04 (.65) 0.096 (.45) 0.05 (5.0) 0.95 (4.95) 0.45 (3.68) 0.35 (3.43) 0.350 (8.89) 0.330 (8.38).48 (9.6).8 (8.40) 0.560 (4.) 0.530 (3.46) 0.0 (0.56) 0.04 (0.36) 0.603 (5.3) 0.573 (4.55) 0.0 (.79) 0.00 (.54) 0.600 (5.4) 0.580 (4.73) 0.560 (4.) 0.530 (3.46) 0.057 (.45) 0.045 (.4) 0.05 (0.64) 0.05 (0.38) 0.05 (.67) 0.095 (.4) PIN 3 0.67 (7.04) 0.65 (6.54) 0.9 (4.85) 0.7 (4.35) 0.057 (.45) 0.045 (.4) 0.035 (0.89) 0.05 (0.64) 0.05 (5.) 0.95 (4.95) 0.350 (8.89) 0.330 (8.38) 0.0 (.79) 0.00 (.54) 0.08 (0.7) 0.00 (0.5) TO-63AB 0.4 (0.45) 0.380 (9.65) 0.45 (6.) MIN. 0.90 (4.83) 0.60 (4.06) 0.055 (.40) 0.045 (.4) Mounting Pad Layout 0.4 (0.66) MIN. 0.360 (9.4) 0.30 (8.3) 0.037 (0.940) 0.07 (0.686) 0.05 (.67) 0.095 (.4) 0.64 (5.85) 0.59 (5.00) 0.05 (5.0) 0.95 (4.95) 0.055 (.40) 0.047 (.9) 0 to 0.0 (0 to 0.54) 0.0 (.79) 0.090 (.9) 0.0 (0.53) 0.04 (0.36) 0.40 (3.56) 0.0 (.79) 0.670 (7.0) 0.59 (5.00) 0.08 (.03) MIN. 0.05 (.67) 0.095 (.4) 0.33 (8.38) MIN. 0.5 (3.8) MIN. 4
Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 9000 Revision: 8-Jul-08