Condition Monitoring Products and Services Reduce: Unplanned downtime Maintenance and operation cost Financial risk Improve: Safety Equipment uptime and plant capacity Product quality Profit
Products & Services Why Vibration Monitoring Reducing unplanned maintenance and production costs, increasing uptime, minimizing financial risk, improving safety and product quality are essential for a competitive and profitable business. Vibration monitoring and analysis provides a continual return on your investment (ROI) and are critical ingredients in your efforts to achieve these goals.
PRÜFTECHNIK Condition Monitoring Product Overview VIBXPERT / VIBXPERT II Advanced one- or twochannel FFT data collector, signal analyzer, balancer and data recorder. VIBXPERT Ex Approved for use in explosive environments. VIBSCANNER Measurement data collector, vibration analyzer and balancer. VIBROTIP Measurement data collector for the five most critical machine condition parameters. VIBCODE Vibration transducer with automatic measurement point identification for all systems guarantees consistently reproducible measurement results, regardless of who takes the readings.
Products & Services Online Product Overview Permanently installed measurement systems monitor production critical machines around the clock. Ideal for machine trains with high downtime costs, high failure probabilities, rapid damage progression, environmental or safety risks. VIBNODE Entry level solution for monitoring standard machine trains (motors, pumps, fans, simple gears,...) VIBROWEB XP Monitoring of critical machine trains with only a few measurement locations (low speed gears, compressors, wind turbines...) VIBRONET Signalmaster Monitoring of systems that are distributed over a large area (conveyor belts, pumping systems,...) VIBCONNECT RF Wireless monitoring system with autonomous energy supply perfectly suited for more widely dispersed areas. VIBROTECTOR Vibration transmitter for a single measurement location (4-20 ma; ISO 10816-3). VIBREX 1 or 2-channel monitoring system for vibration and roller bearing condition.
PRÜFTECHNIK Condition Monitoring OMNITREND suite the common PC platform OMNITREND is the software suite for all portable data collectors and online monitoring systems from PRUFTECHNIK. The OMNITREND software features: Data storage and management True multi-user platform Data exchange with CMMS, Process Control Systems and other condition monitoring (CM) data technologies such as oil analysis, etc. Critical analysis tools Custom report generation and much more
Products & Services Service & Diagnostic Center Machines are often complex and require professional testing expertise in all phases from installation to maintenance. We offer alignment and condition monitoring services including telemonitoring services. Innovative testing equipment and methods achieve greater geometric precision and enable vibration analysis that can significantly increase machine availability, promote early damage detection, abbreviate the troubleshooting phase and thus save on costs.
PRÜFTECHNIK Condition Monitoring Services Overview Balancing Reduction of high vibration loads by means of single or dual plane balancing under operating conditions. Installation and maintenance Selection and installation of measurement locations, introduction of vibration measurements and system maintenance for online systems. Evaluating machine conditions Mobile vibration diagnosis, telemonitoring and telediagnosis, inspection and evaluation. Troubleshooting Machine analysis, temporary telediagnosis service (TTS), load analysis, geo metric analysis (alignment tolerances).
Products & Services Vibration Analysis and Balancing Training Customized LUDECA product training Training for vibration analysis and balancing with our tools is scheduled throughout the year in our Miami, Florida state-of-the-art training center and also available on site. Many have been trained and certified as condition monitoring professionals. Our training facility features large classrooms equipped with the very latest in interactive audiovisual training systems for vibration analysis, balancing and machinery alignment. We offer practical hands-on courses, taught by experts, in a small class size to promote one-on-one interaction and personalized attention. From basics to the most advanced applications, everything is covered in depth. Training courses offered Vibration Analysis Balancing Shaft Alignment Monitoring Alignment Changes Bore Alignment for engines and pumps Turbine Alignment Vertical Shaft Plumbness of Hydro Turbines Geometric Measurement including Flatness, Straightness and Leveling Copyright 2010 by PRÜFTECHNIK AG. ISO 9001:2008 certified. VIBROTIP, VIBSCANNER, VIBXPERT, VIBCODE, VIBREX, VIBROWEB, VIBNODE, VIBRONET, VIBCONNECT and OMNITREND are registered trademarks of PRÜFTECHNIK Dieter Busch AG. PRÜFTECHNIK products are the subject of patents granted or pending throughout the world. The information contained in this leaflet is subject to alteration without further notice due to the PRÜFTECHNIK policy of continuous product development. LIT 01.400.11.12.LUD LUDECA Inc. 1425 N.W. 88th Avenue Doral, FL 33172 Phone: (305) 591-8935 Fax: (305) 591-1537 email: info@ludeca.com www.ludeca.com P R O V E N Q U A L I T Y Made in Germany Global Presence Qualified Support Quality Service PRÜFTECHNIK Condition Monitoring Oskar-Messter-Str. 19-21 85737 Ismaning, Germany Tel: +49 8999616-0 Fax: +49 8999616-300 email: info@pruftechnik.com www.pruftechnik.com A member of the PRUFTECHNIK group