Driving our industry forward. OUR SERVICES Training - Assessment - Events
EQUIPE TRAINING Geotechnical, Drilling and Health & Safety Training Health and Safety Courses IOSH Safe Supervision of Geotechnical Sites This three day course has been developed by industry specialists and is a unique course for managers and supervisors involved in projects in the drilling and geotechnical industry. The course is certified by IOSH and has been approved by The Environment Agency, Thames Water, AGS and BDA and also meets all of the requirements of the UKCG (formerly the Main Contractor s Group). IOSH Avoiding Danger from Underground Services This one day course follows the requirements and guidance set out within HSG47 and includes the four chapters; identifying and managing the dangers; planning the work; detecting, identifying and marking and safe excavation. Important aspects include the use of real examples from the geotechnical industry and delivery by chartered advisors who are from within the industry. IOSH Safe Working on Geotechnical Sites This one day course has been developed by industry specialists as a foundation to site safety for all personnel involved in projects in the drilling and geotechnical industry. Its aim is to impart the core safety skills required of those working on geotechnical sites by building on their existing specialist technical skills and making it relevant to their place of work.
EQUIPE TRAINING Geotechnical, Drilling and Health & Safety Training Geotechnical Courses Soil Description Workshop The one day course will bring delegates up to speed on the changes within the Standards and provide a detailed approach to soil description practices and techniques. The British Standards (Codes) under which investigations in the UK have been carried out continue to incorporate and mirror the European Standards. UK practice has changed to meet these new requirements and practitioners will learn about them and how to follow compliant soil logging techniques within this course. Rock Description Workshop This one day course will bring delegates up to speed on the changes within the Standards and provide a detailed approach to rock description practices and techniques. UK practice has changed to meet these new requirements and practitioners will learn about them and how to follow compliant rock logging techniques within this course. Geotechnical Foundation Design This one day course will provide a general overview of foundation design for geotechnical practitioners and engineers. The course will look at how information is obtained and then used to provide a design for simple shallow foundations. It will also look at the derivation of the formula used for basic foundation design. The methods used for the foundation design calculations will be in accordance with those described in the current British Standards (Eurocodes).
EQUIPE TRAINING Geotechnical, Drilling and Health & Safety Training Geotechnical Courses Geotechnical Laboratory Testing Awareness The course comprises a comprehensive one day overview of the complete process involved in Geotechnical Laboratory Testing from sampling through to interpretation. The course provides guidance on sampling requirements including sample types and sizes and revised regimes to comply with the current British Standards. The influence of sampling methods and storage will also be considered with respect to the parameters which may be obtained. In Situ Testing The course will cover both the theory and the practice of various In situ testing techniques used on typical geotechnical projects. In addition the courses will consider the requirements of the current British Standards (Eurocodes). In situ testing is an essential part of a well-planned ground investigation as it is arguably the best method for obtaining true geotechnical parameters. Field Instrumentation and Monitoring This one day course comprises a comprehensive one day appreciation of the complete process involved in Instrumentation and Monitoring in the geotechnical field environment. The course provides an overview of the current guidance documents and their requirements. Through the day we shall be looking at typical geotechnical field instrumentation specified to monitor groundwater, pore pressures, slope stability and settlement.
EQUIPE TRAINING Geotechnical, Drilling and Health & Safety Training Geotechnical Courses Specifying Site Investigations This one day course will look at the various methods available to carry out intrusive and non intrusive investigation. Whilst the course will concentrate on geotechnical methods some geo-environmental methods will be briefly discussed. The Geotechnical Academy is a unique geotechnical training facility which offers a dynamic learning experience through: Knowledge transfer, practicals, debate, discussion, demonstrations and shared learning. The Academy is a collaboration between the UK s leading independent geotechnical and drilling training provider, Equipe Training, and one of the UK s leading geotechnical contractors, Geotechnical Engineering. Modules offered by the Academy include: How to Plan and Manage Geotechnical Works; Working Safely on Geotechnical Sites; How to Choose the Optimum Drilling Method; Understanding In Situ Testing; Getting the Most from your Instrumentation; Getting it Right - Parameters for Laboratory Testing; Developing the Ground Model; and How to Identify and Manage Risk.
Drilling Courses EQUIPE TRAINING Geotechnical, Drilling and Health & Safety Training Rotary Drilling Awareness for Engineers This one day course provides an in depth insight into the use of rotary drilling techniques within geotechnics. The course will look at the optimum techniques to obtain the information or parameters required or to maintain hole integrity for installations. The content is equally relevant for rotary drilling for ground investigations, geothermal wells and water wells. Rotary Drilling Applications This course is a must for trainee drillers, drilling support operatives looking to upskill and drilling engineers serious about following good practice, improving efficiency and maximizing quality. The course is typically two days but can be modified to suit the level of training required for the individuals. The course incorporates theory in the classroom backed up with hands-on practicals. Attendees will obtain a better understanding of the ranges of plant and equipment available, choice of drilling techniques, choosing the right equipment for the job, choosing the right flush, drill bits, coring and core barrels and also about how geology and hydrogeology may affect the drilling process. We also offer a Mini Mud School to compliment the rotary drilling course. Bespoke Drilling Rig Training With a number of highly experienced drillers amongst Equipe Training s team, we are able to offer bespoke drilling rig training for any rig currently in the UK market. Whether you require training for a Cable Percussion, Rotary, Dynamic Sampling, Sonic, Pagani Penetrometer or Window Sampling Rig, we are happy to provide our services.
Borehole and trial pit digital logging solution. KeyLogbook revolutionises the way site data is captured, recorded and transmitted. Drillers and engineers no longer need to keep re-entering the same data repetitively. You will therefore reduce errors and make the whole process simpler, faster, smarter, greener and more efficient. The system records all site data at source and transmits it directly from site, saving time and money from the outset. Simpler. Faster. Smarter. Greener. - Revolutionises the way site data is captured, recorded and transmitted - Confidence that all data is complete - AGS Data available immediately - Accurate financial control - Quicker, more efficient turnaround of logs and data - Easier to maintain chain of custody - NEW TRIAL PIT LOGGING FUNCTION www.keylogbook.co.uk
EQUIPE TRAINING NVQ Assessments and Training NVQs Delivered by Equipe NVQs are achieved through on-the-job assessment and training referred to as OSAT qualifications. Candidates are assessed against the Standards using a variety of methods agreed between the candidate and the assessor and a portfolio of evidence is produced to prove compliance. Equipe provides qualified NVQ Assessors and trainers to carry out NVQs in their areas of expertise: - Level 2 NVQ Diploma Land Drilling Operations Lead Driller - Level 2 NVQ Certificate Land Drilling Operations Drilling Support Operative - Level 2 NVQ Diploma Directional Drilling Operations Driller - Level 2 NVQ Certificate Directional Drilling Operations Fluid Operative - Level 2 NVQ Certificate Laboratory and Associated Technical Activities - Industrial - Level 3 NVQ Diploma Laboratory and Associated Technical Activities - Industrial - Level 3 NVQ Diploma Occupational Work Supervision Equipe will guide both the employer and candidate through the requirements of these NVQs to ensure that the most appropriate qualifications are achieved.
DRILLING SERVICES SPT Calibrations, LOLER and PUWER Inspections SPT Calibrations Equipe, using its state of the art SPT Analyzer+, provides calibrations and certification compliant to the requirements of the British Standards; BS EN ISO 22476-3 for Standard Penetration Tests and BS EN ISO 22476-2 for Dynamic Probing. The SPT Calibration can be carried out using our in-house test hole, or can be easily carried out on site. Equipe s experienced engineers will then set up the equipment and provide instant analysis to the site staff. Tests can be performed in holes as shallow as 6m and are carried out typically using 10 blows. LOLER Inspections for Drilling Rigs and Equipment Equipe provides Competent Persons to carry out Thorough Examinations of lifting equipment, cable percussion rigs, dynamic sampling rigs (where required) and rotary rigs. Lifting equipment includes any equipment used at work for lifting or lowering loads, including attachments used for anchoring, fixing or supporting. The Regulations also cover a wide range of lifting accessories such as chains, slings and eyebolts, amongst other things. On Site Compliance Testing Equipe can provide a cost effective solution to assist contractors to comply with their Health and Safety, Technical and Quality obligations. In addition to the training courses available from Equipe Training, we also offer an on-site compliance testing service comprising: - SPT Calibrations - LOLER Inspections - Audits
DRILLING SPECIALISTS AND CONSULTANCY SERVICES Supervisors and Technicians Drilling Specialists / Supervisors Equipe has a team of Drilling Specialists who have a minimum of 10 years on site experience and some in excess of 40 years. The team has been hand-picked to provide a service covering all drilling disciplines and techniques. The specialists are all NVQ qualified Lead Drillers and have proven their knowledge and skill level both on UK projects and overseas. The team provides consultancy and advisory services including on-site training to assist contracts where they are either short of the required skill set and need up-skilling or are unsure of the contractor s capabilities. The use of Equipe Drilling Specialists at the start of projects can save valuable time and money for the projects both on a quality and financial basis by improving quality and efficiency. Geotechnical Technicians Equipe can provide specialists to carry out specialist site works which are often lacking in many organisations. The specialists can provide on-site advisory services, training or just do the job. Services include: - Site Supervision - Pump testing - Packer Testing - Borehole penetration vanes - Piston sampling - Thin-walled sampling
THE UK S LARGEST GEOTECHNICAL CONFERENCE AND EXHIBITION Communicate. Promote. Network. Learn. What is it? Geotechnica is the UK s Largest Geotechnical Conference and Exhibition. 2015 will mark the seventh successive year of Geotechnica and will have a host of new and exciting features to compliment the already highly successful and acclaimed Trade Show, Product Exhibition and Geotechnical Conference. Geotechnica aids industry growth and development through the building of business relationships, the introduction of new products and innovations and the imparting of knowledge and advice: Communicate. Promote. Network. Learn. Why should I be there? Geotechnica represents the perfect opportunity to build relationships with prospective clients, work partners and potential new employees. No other event brings together such a diverse group of specialists, all of whom are focussed on the development of the industry. With live demonstrations, technical presentations, equipment and services on display throughout, the exhibition covers all bases. When is it? Geotechnica 2015 will be held on the 8th and 9th of July 2015 at the Warwickshire Exhibition Centre. The WEC s facilities provide the perfect setting for Geotechnica, with a large exhibition hall complete with a dedicated restaurant, as well as a conference suites and several large grassed outdoor exhibition areas. Where can I register? You can now register for a place at Geotechnica 2015 either as a sponsor, an exhibitor, or a visitor - simply fill in the registration forms found on our website - www.geotechnica.co.uk
thegeotechnica THE UK S FASTEST GROWING GEOTECHNICAL E-MAGAZINE What is it? thegeotechnica is a concept e-magazine aimed at the Geotechnical, Environmental and Drilling industry. The magazine is aimed at practitioners: whether you are a Geologist, Scientist or Geotechnical Engineer; Designer or Consultant; Driller or Site Operative - thegeotechnica has something to interest you. We bring you news from all sectors of our community. How much is it? thegeotechnica is FREE to all subscribers to allow invaluable content and important messages to be distributed more readily. Just sign up online and you will receive your copy every month absolutely free. You can also place adverts in thegeotechnica at a competitive rate. See our Media Pack for full rates for advertising. What s the content? The content is your news: If you have information or views that you wish to share, then we want to hear from you. Every month there is useful information and articles, aimed at aiding and dealing with the practical issues which affect our industry. There are also editorial columns and articles from invited contributors. Click here to view thegeotechnica s Media Pack for 2014... Click here to sign up to receive your free copy of thegeotechnica in your email inbox every month...