QUICK INSTALLATION GUIDE Model No: T18
Contents V1.0 Chapter 1:iBall Claro TV Hardware Installation... 2 1.1 Package Contents... 2 1.2 System Requirements... 2 1.3 Hardware Installation... 2 Chapter 2:iBall Claro TV Quick Installation... 3 2.1 The Driver Installation of iball Claro TV... 4 2.2 iball Claro TV Application Installation... 4 2.3 The Remote Installation of iball Claro TV... 5 Chapter 3:iBall Claro TV Quick Uninstallation... 6 3.1 The Driver Uninstallation of iball Claro TV... 6 3.2 iball Claro TV Application Uninstallation... 7 3.3 The Remote Uninstallation of iball Claro TV... 7 Chapter 4:Remote Control... 8 1
Chapter 1:iBall Claro TV Hardware Installation 1.1 Package Contents Unpack your iball Claro TV package and make sure that all items are exited. The following items should be included in your package: iball Claro TV Remote Control & Battery Quick Start Guide FM Antenna Driver CD with iball Claro TV Software Multi AV Cable USB Extension Cable User Manual 1.2 System Requirements Pentium 2.4 GHz or Centrino 1.4 GHz or above 512MB RAM 1GB free Space for Hard disk DirectX 9.0C or higher installed AC97 Compatible Sound Card One Free USB 2.0 interface OS: Microsoft Windows XP/Windows Vista/Windows 7 1.3 Hardware Installation Please follow the steps shown below for installing your TV card and connect as shown in below image. 1. Connect the cable into the TV INPUT connector. 2. Plug USB TV Stick into the USB 2.0 port of your system 3. Start your PC. After booting, the Found New Hardware Wizard will appear. Please Cancel this screen to continue the next step. 2
Chapter 2:iBall Claro TV Quick Installation During installation, it is highly recommended to disable any sub-programs, such as antivirus software and system monitoring applications. 1. When you finish setting up the hardware, the Found New Hardware Wizard window will automatically pop up. Please click Cancel for proper iball Claro TV Quick Installation. 2. Insert the installation CD into the CD ROM device. As the picture shows, the Autorun page will appear. Please choose Quick Installation. Note: If you ve already installed old version Applications, naturally you can skip the steps. 3. The Quick Installation provides you with two choices to install. Please choose Typical Installation for complete device driver and software installation, or choose Custom Installation to set up options according to your personal needs. Click Install to continue. 3
2.1 The Driver Installation of iball Claro TV 4. Click Start to install the iball Claro TV driver. Please wait, while the installation is in process. 5. Now the driver has been installed successfully on your computer and click OK to finish driver installation and go to next step. 2.2 iball Claro TV Application Installation 6. The Install Shield Wizard will guide you through installation of iball Claro TV application. Click Next to continue. 7. Click Finish to end the installation, after this iball claro TV setup wizard gets completed. 4
2.3 The Remote Installation of iball Claro TV 8. The Install Shield Wizard will guide you through installation of iball Claro TV Remote Controller application. Please wait for a while and it will complete the installation automatically. 9. Now the Quick Installation Complete. Please choose Yes, I want to restart my computer now to restart your computer (Recommend) and click Finish to end the installation. 5
Chapter 3:iBall Claro TV Quick Uninstallation 1. If you want to uninstall device driver and software utility, please click Quick Uninstallation. 2. The Quick Uninstallation provides you with two choices to uninstall. Please choose Typical Uninstallation for complete device driver and software uninstallation, or choose Custom Uninstallation to remove options according to your personal needs. Finally, click Uninstall to continue. 3.1 The Driver Uninstallation of iball Claro TV 3. Click OK to uninstall the iball Claro TV driver. Please wait, while the uninstallation is in process. 4. Now iball claro TV driver has been removed successfully on your system and click OK to go to next step. 6
3.2 iball Claro TV Application Uninstallation 5. This step will remove iball Claro TV application. If yes, please click Yes. 6. iball Claro TV was successfully removed. Click OK. 7. This step is to confirm that if you really want to remove iball Claro TV application. If yes, please click OK. 3.3 The Remote Uninstallation of iball Claro TV 8. The Remote Controller application has been removed completely. Please click Finish to end. 9. Now the Quick Uninstallation Complete. Please choose Yes, I want to restart my computer now to restart your computer (Recommend) and click Finish to end the Uninstallation. 7
Chapter 4:Remote Control (Power) Launch / Close Application Source Source Input Zoom Switch TV screen in Window Mode or Full screen mode Shut Down Use to close iball Claro TV. Then use the key to shut down your PC. CH+/CH- Change the channel VOL-/VOL+ Volume adjustment Numeric Keypad Input numbers (0~9) Input / Enter Back to the previous CH Rec Record TV program Mute Mute Play Play / Pause Timeshifting Stop Stop Go to Begin Go to End Backward Forward F1 (Red key) Enable Timeshifting F2 (Green key) Snapshot F3 (Yellow key) Show OSD info F4 (Blue key) N/A For any technical help on iball products write to support@iball.co.in www.iball.co.in 8