August 2013 International opportunities and events for students and graduates 1
Airbus Newsletter August 13 Current open positions for students and graduates This is the new edition of the Airbus Newsletter focusing on career opportunities in Airbus, existing since December 2011. Information about open graduate positions and early career entry programmes can be found on our career website at www.airbus.com/work. Most roles can be accessed by clicking the Apply Now button except where stated otherwise. The positions listed for Airbus will be visible on the system as long as they are available. Once a position has been filled the reference and job description will disappear, so we encourage you to be proactive in applying. APPRENTICESHIP OPPORTUNITIES IN FRANCE AIRBUS 2013 APPRENTICESHIP CAMPAIGN! Apply Now at http://www.airbus.com/work/earlycareers/undergraduates/apprenticeships/apprenticeships-in-france/! 2
GRADUATE ROLES Reference Title Start date Location 10221825 Responsable d unité de Production Manufacturing FAL 02.09.2013 Toulouse 10223412 Loads analysis Engineer 05.09.2013 Getafe 10222559 Electrical design Engineer 02.09.2013 Getafe 10222216 IT/IM specialist ETL buisness intelligence solutions 02.09.2013 Barajas 10223233 Electrical & Control 15.08.2013 Getafe 10223070 Electrical & Control 15.08.2013 Getafe 10221718 Supplier Management 15.08.2013 Getafe 10223412 Loads analysis Engineer 15.08.2013 Getafe 10223415 Aerodynamics Engineer 15.08.2013 Getafe 10221767 Flight Mechanics Engineer 15.08.2013 Getafe 10218089 System safety Engineer 15.08.2013 Getafe WORKING STUDENT Reference Title Start Date Location 10214058 Werkstudent (m/w) im Bereich 01.09.2013 Bremen Schwerbehindertenabteilung 10212416 Werkstudent/in Audits & Surveillance Support 01.09.2013 Bremen 10217214 Werkstudent (m/w) im Bereich Einkauf: General 01.09.2013 Hamburg Procurement 10219292 Werkstudent (m/w) im Bereich Gesundheit: Medizinischer 01.09.2013 Hamburg Dienst 10222175 Werkstudent (m/w) im Bereich ICT Academy: elearning 01.09.2013 Hamburg Graphic Design Support 10222014 Werkstudent (m/w) im Bereich Personalwesen: A350 02.10.2013 Hamburg Manufacturing 10220886 Werkstudent (m/w) im Bereich Personalwesen: 01.09.2013 Hamburg Human Resources Programmes 10222246 Werkstudent (m/w) im Bereich HR: Betriebliches 01.09.2013 Bremen Eingliederungsmanagement 10223849 Werkstudent (w/m) im Bereich Event- und 01.09.2013 Bremen Projektmanagement: Induction 10218040 Werkstudent (w/m) im Bereich Event- und 01.09.2013 Hamburg Projektmanagement: Induction 10222372 Werkstudent (m/w) im Airbus Training Center: Support 01.09.2013 Hamburg Trainingsorganisation 10214768 Werkstudent (m/w) im Bereich Engineering: Technische 01.09.2013 Hamburg Leitung Airbus Deutschland für A300/A310 10222703 Working Student (m/w) within Customer Services: 01.09.2013 Hamburg A350XWB Cabin Upgrade Readiness 10222032 Werkstudent (w/m) im Bereich Engineering: 01.09.2013 Bremen Plattform- und Wissensmanagement 10221720 Werkstudent (m/w) im Bereich Engineering: Akustik und 01.10.2013 Hamburg Vibration 10216972 Werkstudent im Bereich Projektmanagement: 01.09.2013 Hamburg Design Process Architecture 10210203 Werkstudent (m/w) im Bereich Engineering: Elektrische 03.09.2013 Hamburg Installation Long Range 10220850 Working Student (m/f) within Programmes: Operational Support 03.09.2013 Hamburg 3
Airbus Newsletter August 13 INTERNSHIPS Reference Title Start date Location 10218177 Business law internship 01.10.2013 Toulouse 10217488 Contract law internship 01.09.2013 Toulouse 10214892 Pressure measurement engineer 01.07.2013 Toulouse 10218039 Gap year in HR - HRBP assistant for the A350 Program 01.09.2013 Toulouse 10218188 Année de césure RH - gestion de l'intérim 01.09.2013 Toulouse 10218677 Internship within the Legal Affairs Department - Aircraft 01.10.2013 Toulouse Procurement 10219107 Internship - Litigation & Regulatory Affairs 01.09.2013 Toulouse 10217370 Internship in HR - Transnational HRBP Assistant 01.07.2013 Toulouse 10219220 Customers affairs communication internship 01.08.2013 Toulouse 10219364 Internship in Human Resources - Centre of Competence - 01.09.2013 Toulouse Learning 10214892 Pressure measurement engineer 01.07.2013 Toulouse 10220057 A380 Chief Engineering Mechanical Systems 01.09.2013 Toulouse 10219155 Communication 01.09.2013 Toulouse 10217045 Reconnaissance graphique 01.09.2013 Toulouse 10217855 Santé sécurité 01.09.2013 Toulouse 10220352 Internship in finance - merger & acquisition 01.09.2013 Toulouse 10221107 InterNatco 01.08.2013 Toulouse 10219958 Healt and safety 01.09.2013 Toulouse 10221258 Corporate internship - legal counsel trainee 01.10.2013 Toulouse 10220788 Internship - expatriate management process improvement 01.09.2013 Toulouse 10220944 Stage HR - Assistant HRBP 01.09.2013 Toulouse 10222210 Internship - customer services communication tools 01.09.2013 Toulouse Assistant 10222172 Lean & Visual Management within Airbus HR Department 01.09.2013 Toulouse 10220976 Cabin Retrofit Buyer 01.09.2013 Toulouse 10221279 Internship within Airbus Legal Department 01.09.2013 Toulouse 10220859 Training analysis 01.09.2013 Toulouse 10219343 Safety local support 01.09.2013 Toulouse 10219865 ME A350 assembly and systems installations 01.09.2013 Toulouse 10220364 Technology watch 01.10.2013 Toulouse 10222451 Etude process perçage A400M 01.09.2013 Toulouse 10221866 Etude durée de vie outils coupants 01.09.2013 Toulouse 10220969 Analyse du process d'industrialisation des pièces et sousensembles 01.09.2013 Toulouse 10220862 UP-DEV A/C development schedule template 01.09.2013 Toulouse 10222263 Quality Programme Management 01.09.2013 Toulouse 10221715 Global Sourcing Support Trainee 01.09.2013 Toulouse 10222260 PMO Assistante 01.09.2013 Toulouse 10223380 Stage Process - FMEA 01.09.2013 Toulouse 10216188 Quality Improvement tools implementing 01.09.2013 Nantes 10222254 Stage Qualité A400M - Protection de la pointe avant 01.09.2013 Toulouse 10220619 Human Resources Internship within Airbus A320 Program 01.09.2013 Toulouse Department 10222003 Internship - HRBP Assistant 01.09.2013 Toulouse 10205622 Internship quality Support 04.09.2013 Getafe 4
10209240 Internship Offset 04.09.2013 Barajas 10207446 E123EGIEN - Practicas FAL NH90 04.09.2013 Albacete 10210376 Becario control produccion A350 04.09.2013 Getafe 10215479 Internship health & safety 04.09.2013 Getafe / Barajas 10217558 Internship bos design 04.09.2013 Getafe 10217787 Internship Environment & Waste 04.09.2013 Illescas 10212020 E123TI - Prácticas área de aeronavegabilidad 04.09.2013 Getafe 10211649 Internship Servicios Industriales 04.09.2013 Albacete 10219420 Internship Illescas Quality Lab 04.09.2013 Illescas 10218299 Internship Competence Management 04.09.2013 Getafe 10218922 Internship Supplier Compliance Specialist 04.09.2013 Getafe 10219690 Internship Mass Properties 04.09.2013 Getafe 10221032 Internship Clean Sky Capture Phase support 04.09.2013 Madrid 10220571 Internship Control de Producción 04.09.2013 Getafe 10221652 Internship Airframe Research & Technology 04.09.2013 Getafe 10222103 Internship Materials Procurement 04.09.2013 Getafe 10222416 Internship in Information Services 04.09.2013 Madrid 10221808 Internship- General Procurement 04.09.2013 Getafe 10222627 Internship project management and lean task support 04.09.2013 Getafe 10223551 Internship Business Support OED Illescas 04.09.2013 Illescas 10223188 Internship-A380 Programme 04.09.2013 Getafe 10223918 Internship Methods and Tools 04.09.2013 Getafe 10223681 Internship Quality A380 04.09.2013 Getafe 10224269 Internship Airworthiness Administration Support 04.09.2013 Getafe 10224770 Internship-PEGASUS-Acoustic simulation 04.09.2013 Getafe 10208726 Internship Universidad Sevilla (Erasmus) 04.09.2013 Tablada 10210949 Internship - Procurement 04.09.2013 Tablada 10220366 Internship Ingeniería de Producción 04.09.2013 Puerto real 10220676 Internship Sheet Metal Management & Automated 04.09.2013 Cbc Assembly 10221877 Internship Materials and Processes Engineering 04.09.2013 Tablada 10221029 Internship Building and Construction 04.09.2013 San pablo sur 10222705 Internship Aerostructures Engineer 04.09.2013 Tablada 10222852 internship Supply Chain 04.09.2013 Tablada 10223775 Internship Aerostructures Programme 04.09.2013 Tablada 10222472 Internship A400M Production Department 04.09.2013 Tablada 10224128 Internship Energy 04.09.2013 Puerto real 10223324 Internship-Lean in Procurement 04.09.2013 Tablada 10212868 Praktikum im Bereich Produktion: Erstellung eines 01.10.2013 Bremen Leistungskatalogs 10212865 Praktikum im Bereich Produktion: Maintenance Parts 01.10.2013 Bremen Manufacturing 10224163 Praktikum A380 Quality Conformance 01.09.2013 Hamburg 10224717 Praktikum in Manufacturing Engineering: Entwicklung 01.10.2013 Bremen Reportings 10209964 Praktikum im Bereich Engineerig: Tool- und 02.09.2013 Hamburg Datenbankentwicklung 10217923 Praktikum im Bereich Produktionsplanung: Paintshop 01.09.2013 Hamburg 10223705 Internship within Human Resources: Talent & Executive 01.09.2013 Hamburg Development 10222969 Praktikum im Bereich Berufsausbildung: 15.09.2013 Hamburg Prozessoptimierung 10223696 Praktikum im Bereich Endlackierung: Nahinfrarot- Spektroskopie 01.10.2013 Hamburg 5
Airbus Newsletter August 13 10223762 Praktikum im Bereich des Kompetenzzentrums für 01.09.2013 Hamburg Projektmanagement 10222728 Internship within Central Programme: A380 Programme 01.10.2013 Hamburg performance 10222624 Internship within Central Programme: A380 Programme 01.11.2013 Hamburg performance 10224671 Praktikum im Bereich Personalwesen: Expatriate 15.09.2013 Hamburg Management 10209027 Praktikum im Bereich Weiterbildung: Einführung eines 01.09.2013 Hamburg Toolmanagements 10212933 Internship within Manufacturing: Production Efficiency- 01.08.2013 Stade Digital Factory 10220173 Internship within Project Management: 01.08.2013 Hamburg A350XWB Cabin & Cargo, Industrial Fuselage 10223395 Praktikum im Bereich Manufacturing Engineering: 01.10.2013 Hamburg Projektmanagement 10222288 Praktikum im Bereich Engineering: Innovation Cell 01.10.2013 Hamburg 10222080 Praktikum im Bereich Materialien und Prozesse: 15.09.2013 Bremen Fire Saftey Engineering & Test 10219696 Internship within Engineering: Assembly Technology 01.09.2013 Bremen 10225005 Praktikum im Bereich Produktion SA & LR 02.09.2013 Hamburg 10211046 Praktikum im Bereich Qualität: 17.09.2013 Stade Unterstützung für Qualität- und Umweltmanagement 10217574 Praktikum im Bereich Forschung und Entwicklung: 27.08.2013 Stade Faserverbundbauweise 10221917 Internship within Engineering: A350 Fuselage Structure Support 01.09.2013 Hamburg VOLUNTEER INTERNATIONAL EXPERIENCE VIE Reference Title Start Date Location 10221363 VIE - Project Management 01.11.2013 Hamburg 10221725 VIE - ICT Service Management 01.11.2013 Hamburg 10222556 VIE - CFD Engineer for Air Systems Design 01.11.2013 Hamburg 10223300 VIE - Project Manager for A350 Bremen Fuselage 01.11.2013 Bremen Engineering Plateau 10222632 VIE - Validation & Verification and In-Service Issues 01.11.2013 Hamburg 10222189 VIE - e-learning Project Support 01.11.2013 Hamburg 10223131 VIE - Procurement Operation Forging / Casting 01.11.2013 Bremen 10222829 VIE - Coordination of Cost Improvement SA 01.11.2013 Hamburg 10222713 VIE Single Aisle Manufacturing 01.11.2013 Hamburg 10223827 VIE - Controller 01.11.2013 Hamburg 10220906 VIE for Structures Test Engineering 01.11.2013 Hamburg 10223684 VIE - CIDS New Development 01.11.2013 Buxtehude 10223491 VIE Knowledge Management Assistant 01.11.2013 Filton 10224920 VIE supply chain and project management officer 01.11.2013 Broughton 6
FINAL YEAR THESIS Reference Title Start Date Location 10211967 Final Thesis: Cargo area damage detection 01.10.2013 Hamburg 10222289 Abschlussarbeit im Bereich Engineering: Innovation Cell 15.10.2013 Hamburg 7
Airbus Newsletter August 13 Events SPAIN - EADS Polytechnic University of Madrid - UPM (Aeronautical School) Master in COMPOSITES 4th Edition. 2013-2014 Designed to Postgraduate to complement a previous university training, and to enable to the student in the practical aspects of the design, development and industrialisation of structures in composite Composites Manufacturing Design Analysis This Master mainly is oriented to composite materials for the aerospace industry, although its content is equally applicable to other sectors of the high technology: naval industry, wind energy, railway transport high speed. Who is the master for? The Master focuses on the aerospace industry although the contents and processes are also applicable to other high tech industrial sectors. Due to the growing importance of the wind energy industry, this years' edition offers a specific module on wind turbine blades The course is oriented to graduates in engineering, materials science, physics or chemistry. *Master's Structure - The Master may be completed in 1 year - The Master is organized in Modules that last from 2 to 4 weeks - Each Module is divided into several lectures taught intensively Monday thru Thursday in the afternoon (17:00 to 21:00) - Lectures will be given mostly in English - Handouts and other course materials are written in English 8
*Internship During the master courses the students will have an internship experience at the company in a Composite area (7h/day, in the morning). Working time: 7h/day Grant: 875 /month *Master Thesis To be done after the lectures completion. Agreements have been reached with EADS and other industries and research centres, to do the Thesis at their facilities. Acceptance is done by the industry on a case by case basis. *Modules Modules are taught sequentially, the exact dates can be found at our website: - Constituents materials: Fibre, matrices, prepregs, cores - Manufacture of Polymer Matrix Composites - Design of Composite structures - Analysis of Composites structures - Simulation techniques and Virtual testing - Health and environment issues. Green composites - Certification of composite aerostructures - In-service behaviour - Production management. Lean manufacturing - Project management - Smart Composites - Non conventional composites CMC, MMC - Nanocomposites - Concurrent engineering - Special considerations for Composites in Space applications - Design and manufacturing of Wind Turbine blades *Fees Total fees for the Master are 9.900 *Entry requirements - A degree in engineering, technical engineering, chemistry or physics - High level of English - Spanish, French and/or German will be taken into considerati Information: Prof. Alfredo Güemes E.T.S.I. Aeronáuticos alfredo.guemes@upm.es www.aero.upm.es/departamentos/mmtc 9
Airbus Newsletter August 13 Organization Organising Institution School of Engineering- University of Seville (Spain). Purpose To give the participants a general knowledge of the related fields within the aeronautical industry organization, business model and supply chain. To train the participants in general knowledge within the production of systems, materials and components for aircraft manufacturing and manufacturing and assembly processes involved in aeronautical production. Number of Credits 80 ECTS Requirements For Admission Engineer Master s degrees in Engineering: (Aeronautical, Industrial, Industrial Management, Telecommunications, Naval, Civil). High level of English and medium-high level of Spanish. Completed find year thesis. Dates Pre-selection: July - September 2013 Enrolment: 1-20 October 2013 Course: 14 November 2013 30 October 2014 More Information: e.mail gscaio@us.es / Phone number +34 954 482175 (Monday to Friday from 9 to 14h). How to Apply Send the following information to: master.gsc&aio@military.airbus.com CV in English. Academics Records. ID or Passport number. Professional and International experience. Other merits. 10
Contents Module 1. INTRODUCTION. OVERVIEW OF AERONAUTICAL INDUSTRY (1 ECTS) Master Introduction/ Aeronautical environment / Business Model / Legal affairs and Human Resources in the Aerospace Industry. Module 2. MATERIALS, AIRCRAFT COMPONENTS AND AIRCRAFT SYSTEMS (3 ECTS) Composite Materials in Aircraft Manufacturing / Metal Materials in Aircraft Manufacturing / Aircraft Systems Integration / Aircraft Structures. Module 3. PRODUCTION MANAGEMENT AND PLANNING (4 ECTS) Introduction / Planning / Facilities Management / Logistics / Production Planning and Controlling / FAL Planning and Controlling. Module 4. MANUFACTURING PROCESSES AND OPERATIONS (3 ECTS) Material Removal Processes / Metal Forming Processes / Manufacturing of Composite Parts / Wire Harness Manufacturing and Assembly / Manufacturing Technologies I & II. Module 5. QUALITY (3 ECTS) Introduction to Quality / Quality management / Regulations and Certification / Company Quality Systems / Quality in Final Assembly Line (FAL) / Quality in Aero Structures Assembly / Quality in Supply Chain Management. Module 6. LEAN (2 ECTS) Introduction to Lean Production / Lean in Parts Manufacturing / Lean in Aero Structures Assembly / Module 7. ASSEMBLY OF AEROSTRUCTURES (2 ECTS) Joining Processes / Aero structures Assembly Engineering / Aero Structures Assembly Production: Planning and Controlling / Aero Structures Assembly Production: Production Organization / Maintenance. Module 8. ENGINEERING (2 ECTS) Product Lifecycle Management (PLM) / Product Structure / Industrialization, Support / PLM Tools / Ground Test System / Industrial Innovation. Module 9. SKILLS (3 ECTS) Effective Communication / Presentations & Meetings / Team Building / Negotiation. Module 10. SUPPLY CHAIN MANAGEMENT (3 ECTS) Introduction to the Global Supply Chain / Global Supply Chain I / Global Supply Chain II / Practical Overview. Module 11. FINAL ASSEMBLY LINE (FAL) (2 ECTS) Manufacturing and Production / Manufacturing Engineering and Industrialization / FAL Logistics / Facilities / Tooling Facilities / Ground Test System. Module 12: TRAINING PRACTICE (44 ECTS) Training practice at AIRBUS MILITARY facilities (paid practice). Module 13: MASTER THESIS (8 ECTS) FOLLOW US ONLINE 11