Silicon PIN Photodiode Description The is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement of TO-5 devices in many applications. Due to its waterclear epoxy the device is sensitive to visible and infrared radiation. The large active area combined with a flat case gives a high sensitivity at a wide viewing angle. 94 8583 Features Large radiant sensitive area (A = 7.5 mm 2 ) Wide angle of half sensitivity ϕ = ± 65 High photo sensitivity Fast response times Small junction capacitance Suitable for visible and near infrared radiation Lead-free device Applications High speed photo detector Absolute Maximum Ratings Parameter Test condition Symbol Value Unit Reverse Voltage V R 6 V Power Dissipation T amb 25 C P V 25 mw Junction Temperature T j C Storage Temperature Range T stg - 55 to + C Soldering Temperature t 3 s T sd 26 C Thermal Resistance Junction/Ambient R thja 35 K/W Electrical Characteristics Parameter Test condition Symbol Min Typ. Max Unit Breakdown Voltage I R = µa, E = V (BR) 6 V Reverse Dark Current V R = V, E = I ro 2 3 na Diode capacitance V R = V, f = MHz, E = C D 7 pf V R = 3 V, f = MHz, E = C D 25 4 pf
VISHAY Optical Characteristics Parameter Test condition Symbol Min Typ. Max Unit Open Circuit Voltage E e = mw/cm 2, λ = 95 nm V o 35 mv Temp. Coefficient of V o Ee = mw/cm 2, λ = 95 nm TK Vo -2.6 mv/k Short Circuit Current E A = klx I k 7 µa E e = mw/cm 2, λ = 95 nm I k 47 µa Temp. Coefficient of I k Ee = mw/cm 2, λ = 95 nm TK Ik. %/K Reverse Light Current E A = klx, V R = 5 V I ra 75 µa E e = mw/cm 2, λ = 95 nm, V R = 5 V Typical Characteristics (T amb = 25 C unless otherwise specified) I ra 4 5 µa Angle of Half Sensitivity ϕ ± 65 deg Wavelength of Peak Sensitivity λ p 9 nm Range of Spectral Bandwidth λ.5 6 to 5 nm Noise Equivalent Power V R = V, λ = 95 nm NEP 4 x -4 W/ Hz Rise Time V R = V, R L = kω, λ = 82 nm t r ns Fall Time V R = V, R L = kω, λ = 82 nm t f ns I ro - Reverse Dark Current ( na ) V R =V 2 4 6 8 I ra rel - Relative Reverse Light Current.4.2..8 2 λ = 95 nm 4 6 8 94 843 T amb - Ambient Temperature ( C ) 94 846 T amb - Ambient Temperature ( C ) Fig. Reverse Dark Current vs. Ambient Temperature Fig. 2 Relative Reverse Light Current vs. Ambient Temperature 2
λ= 95 nm C D - Diode Capacitance ( pf ) 8 6 4 2 E= f=mhz 94 847... E e Irradiance ( mw/cm 2 ). 94 847 V R - Reverse V oltage ( V ) Fig. 3 Reverse Light Current vs. Irradiance Fig. 6 Diode Capacitance vs. Reverse Voltage 94 848. 2 3 4 E A Illuminance ( lx ) S( λ ) rel Relative Spectral Sensitivity 94 842..8.4.2 35 55 75 95 λ Wavelength ( nm ) 5 Fig. 4 Diode Capacitance vs. Reverse Voltage Fig. 7 Relative Spectral Sensitivity vs. Wavelength mw/cm 2.5 mw/cm 2.2mW/cm 2.mW/cm 2.5 mw/cm 2 λ = 95 nm. S rel Relative Sensitivity..9.8.7.4.2.2.4 2 3 4 5 6 7 8 94 849 V R Reverse Voltage ( V ) 94 846 Fig. 5 Reverse Light Current vs. Reverse Voltage Fig. 8 Relative Radiant Sensitivity vs. Angular Displacement 3
VISHAY Package Dimensions in mm 96 286 4
Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (987) and its London Amendments (99) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 99 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/54/EEC and 9/69/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-7425 Heilbronn, Germany Telephone: 49 ()73 67 283, Fax number: 49 ()73 67 2423 5