Drains and shower channels. Wastewater Drainage

Drains and shower channels Wastewater Drainage

Drains for industrial and public buildings Bathrooms Wellness Ecoguss... 75 78 Practicus... 79 81 Bathroom drains For use in the private and commercial sector System The Ultraflat... 88 The Vertical... 89 Giro... 89 System 100 The Superflat... 94/95 Classic... 96/97 For use in the private and commercial sector Linearis Comfort... 104 Linearis Compact... 108 Linearis Super60... Linearis... 111/114 The Universal... 120 with / without backwater protection Drehfix... 121 with / without backwater protection... 122 Volatile liquid traps... 123 with / without twin flap backwater valve Stainless steel drains and channels Quality drains and channels for foodprocessing operations Drains... 128 137 Drainage channels... 138 140 70 Catalogue 2.3 Parking deck drains... 144 Balcony / Roof drains... 146/147 Gutter drains... 150 Yard drains... 151 Street gullies... 158

Catalogue 2.3 71

Professional advantages Ecoguss the HighTec material. Everything is getting easier! Floor/Roof drains Ecoguss Ø 58/78/83/ Ecoguss the new material, is becoming more and more accepted. Drains made from Ecoguss combine all the advantages of polymer drains, such as low weight and no corrosion, with the advantages of cast iron drains such as sound insulation and heat resistance. Metallic composite material Metallic properties but still non corrosive and nonconductive (no electrical grounding necessary!) Honeycomb structure for perfect concrete bonding The economic alternative to cast iron drains Variable upper section High temperatureresistant materials Briefly up to 400 C, for processing with hot bitumen acc. to DIN 18195 Chemical resistance Extremely high acid/alkali resistance for chemicallypolluted wastewater. Sound insulation Soundabsorbent material For increased sound insulation to DIN 4109 < 30 db (A) With SML pipe connection Connection to SML pipe according to DIN 19522 in Ø 58, 78, and Ø 83! No transition pieces any more! For an appealing design and unmatched hygiene Selfcleaning effect thanks to permanently corrosionfree and smooth surface. not that...... but this! QuickFit the allround seal Cheaper and faster installation: QuickFit the passage seal for core drillings, with approval no. Z19.171719 Minimised core drillings Ø 160 mm 2/3 costsavings, no grouting required on site Additional sound insulation and smoke tight closure between core drilling and drain. Connection of the moisture barrier/sliding coat Lock & Lift system for fast cleaning. Design in a nutshell Easy maintenance Thanks to removeable odour trap Products see pages 75 78 72 Catalogue 2.3 Insert QuickFit in core drilling (Ø 160 mm). Lower drain body with vertical outlet into QuickFit. The prizewinning design covers from the 2012 collection are a first rate combination of aesthetics and technology. Eight different stainless steel covers provide enough versatility to meet individual design needs. The recessed cover for onsite tiling allow the cover to be matched to the floor. If necessary, click pressure sealing flange into place, fit upper section. Kessel

Practicus the heavy duty polymer drain Point drains System Floor/Roof drains Practicus Ø 50/75/ High flow rate of up to 1.8 l/s Selfcleaning effect thanks to corrosionfree and smooth surface Variable cover/upper section Honeycomb structure for perfect concrete bonding Ideal for connecting to plastic pipes KESSEL modular system: Ecoguss and Practicus see page 82/83 Components System Upper section in ABS with design cover Oval 120 mm Art. # 48 202 Fire and smoke protection FireKit Pressure sealing flange Art. # 48 402 Fireresistance class F 120 with approval no. Z19.171719 Optional for drain bodies Ecoguss or Practicus with vertical outlet. Only use in combination with odour trap! Drain body Practicus in PP Art. # 45 210 Odour trap Sealing water height 50 mm according to EN 3 = Drain Fire and smoke protection FireKit with approval no. Z19.171719 Invisible Oval Spot Cross Festival Parade Slot Sticks Products see pages 79 81 Catalogue 2.3 73

Ecoguss and Practicus Design the project drain you need yourself using our practical matrix order system. Select the drain body, lateral or vertical outlet and the diameter Select the matching upper section The Article # for the matching drain is stated in the respective section. For other product combinations and accessories, see the modular system at page 82/83 48 311.53 74 Catalogue 2.3

Ecoguss with pressure sealing flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with pressure sealing flange with odour trap, connection to SMLpipe Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 273 B H 147 Ø B 58 245 78 134 83 134 148 H 120 109 108 92 40 312 138 min. 10 max. 18 120 40 312 132 min. 10 max. 23 120 40 312 132 min. 10 max. 23 120 16 132 90 Ø H 58 100 273 135 78 107 H 83 With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # 48 963 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 904 With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 905 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 201 With slotted cover 138 x 138 mm, class K 3, screwed. Art. # 48 950 Ø 58 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # 48 758 Vertical outlet Art. # 48 858 Ø 78 Lateral outlet Art. # 48 778 48 758.51 48 858.51 48 778.51 48 758.53 48 758.54 48 758.63 48 758.11 48 858.53 48 858.54 48 858.63 48 858.11 48 778.53 48 778.54 48 778.63 48 778.11 Vertical outlet Art. # 48 878 48 878.51 48 878.53 48 878.54 48 878.63 48 878.11 Ø 83 Lateral outlet Art. # 48 783 Vertical outlet Art. # 48 883 Ø 48 783.51 48 783.53 48 883.51 48 883.53 48 783.54 48 883.54 48 783.63 48 783.11 48 883.63 48 883.11 Lateral outlet Art. # 48 711 48 711.51 48 711.53 48 711.54 48 711.63 48 711.11 Vertical outlet Art. # 48 811 48 811.51 48 811.53 48 811.54 48 811.63 48 811.11 For other combinations and accessories see modular system page 82/83 * Ø = Outer Diameter Catalogue 2.3 75

Ecoguss with glue flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with glue flange with odour trap, connection to SMLpipe Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 105 348 B H 145 Ø B 58 245 78 134 83 134 148 H 120 107 106 90 40 312 138 min. 10 max. 18 120 40 312 132 min. 10 max. 23 120 40 312 132 min. 10 max. 23 120 16 132 90 105 348 135 H With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # 48 963 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 904 With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 905 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 201 With slotted cover 138 x 138 mm, class K 3, screwed. Art. # 48 950 Ø H 58 100 78 83 Ø 58 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # 48 558 Vertical outlet Art. # 48 658 Ø 78 Lateral outlet Art. # 48 578 48 558.51 48 658.51 48 578.51 48 558.53 48 558.54 48 558.63 48 558.11 48 658.53 48 658.54 48 658.63 48 658.11 48 578.53 48 578.54 48 578.63 48 578.11 Vertical outlet Art. # 48 678 48 678.51 48 678.53 48 678.54 48 678.63 48 678.11 Ø 83 Lateral outlet Art. # 48 583 Vertical outlet Art. # 48 683 Ø 48 583.51 48 583.53 48 683.51 48 683.53 48 583.54 48 683.54 48 583.63 48 583.11 48 683.63 48 683.11 Lateral outlet Art. # 48 511 48 511.51 48 511.53 48 511.54 48 511.63 48 511.11 Vertical outlet Art. # 48 611 48 611.51 48 611.53 48 611.54 48 611.63 48 611.11 For other combinations and accessories see modular system page 82/83 * Ø = Outer Diameter 76 Catalogue 2.3

Ecoguss with connection flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with connection flange with odour trap, connection to SMLpipe Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 132 B H Ø B 58 245 78 134 83 134 148 H 120 109 108 92 40 312 138 min. 10 max. 18 120 40 312 132 min. 10 max. 23 120 40 312 132 min. 10 max. 23 120 16 132 90 135 H 91 With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # 48 963 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 904 With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 905 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 201 With slotted cover 138 x 138 mm, class K 3, screwed. Art. # 48 950 Ø H 58 100 78 83 Ø 58 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # 48 358 Vertical outlet Art. # 48 458 Ø 78 Lateral outlet Art. # 48 378 48 358.51 48 458.51 48 378.51 48 358.53 48 358.54 48 358.63 48 358.11 48 458.53 48 458.54 48 458.63 48 458.11 48 378.53 48 378.54 48 378.63 48 378.11 Vertical outlet Art. # 48 478 48 478.51 48 478.53 48 478.54 48 478.63 48 478.11 Ø 83 Lateral outlet Art. # 48 383 Vertical outlet Art. # 48 483 Ø 48 383.51 48 383.53 48 483.51 48 483.53 48 383.54 48 483.54 48 383.63 48 383.11 48 483.63 48 483.11 Lateral outlet Art. # 48 311 48 311.51 48 311.53 48 311.54 48 311.63 48 311.11 Vertical outlet Art. # 48 411 48 411.51 48 411.53 48 411.54 48 411.63 48 411.11 For other combinations and accessories see modular system page 82/83 * Ø = Outer Diameter Catalogue 2.3 77

Ecoguss For interior installation according to EN 3 Illustration and dimensioned drawing Article description Ø* Article # with shallow bed gasket Variable upper section min. 40 max. 96 min. 10 max. 18 312 150 135 91 H 29 Floor/Roof drain Ecoguss Ø..., vertical outlet, for connection to SMLpipe according to DIN 19522. With removable odour trap. Sealing water height 50 mm. With lip seal. With Variofix shallow bed upper section in ABS with slotted cover 138 x 138 mm and rim, screwed, for tile thicknesses of 816 mm, Class L 15 (able to withstand loads up to max. 1.5 to). Ø* H 58 100 78 83 Ø 58 Ø 78 Ø 83 Ø 48 458.51 48 478.51 48 483.51 48 411.51 1.8 l/sec flow rate Installation area 180 x 180 mm with pressure sealing flange Variable upper section min. 25 max. 67 273 150 135 107 EN 3 LGA Typetested and monitored guaranteed with tested quality Floor/Roof drain Ecoguss with pressure sealing flange Vertical outlet, With removable odour trap. Sealing water height 50 mm. With lip seal. With pressure sealing flange With upper section in ABS with slotted cover 138 x 138 mm and rim, Class L 15 (able to withstand loads up to max. 1.5 to). Ø 48 811.41 1.8 l/sec flow rate Installation area 180 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality * Ø = Outer Diameter with connection flange Variable upper section 1.8 l/sec flow rate Installation area 180 x 180 mm 150 135 91 min. 20 max. 76 Floor/Roof drain Ecoguss Ø..., vertical outlet, for connection to SMLpipe according to DIN 19522. With removable odour trap. Sealing water height 50 mm. With lip seal. With upper section in ABS with slotted cover 138 x 138 mm, screwed, Class K 3 (able to withstand loads up to max. 300 kg). Ø* H EN 3 58 100 LGA Typetested and monitored guaranteed with tested quality 78 83 Ø 58 Ø 78 Ø 83 Ø 48 458.11 48 478.11 48 483.11 48 411.11 78 Catalogue 2.3

Practicus with pressure sealing flange Drain body Upper sections 1.8 l/sec flow rate Sealing water height 50 mm Practicus with pressure sealing flange with odour trap Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 273 B H 147 Ø 50 75 B 245 134 148 H 120 107 90 40 312 138 min. 10 max. 18 120 40 312 132 min. 10 max. 23 120 40 312 132 min. 10 max. 23 120 16 132 90 Ø H 50 100 273 135 75 107 H With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # 48 963 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 904 With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 905 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 201 With slotted cover 138 x 138 mm, class K 3, screwed. Art. # 48 950 Ø 50 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # 45 159 Vertical outlet Art. # 45 259 Ø 75 Lateral outlet Art. # 45 179 45 159.51 45 259.51 45 179.51 45 159.53 45 159.54 45 159.63 45 159.11 45 259.53 45 259.54 45 259.63 45 259.11 45 179.53 45 179.54 45 179.63 45 179.11 Vertical outlet Art. # 45 279 45 279.51 45 279.53 45 279.54 45 279.63 45 279.11 Ø Lateral outlet Art. # 45 119 Vertical outlet Art. # 45 219 45 119.51 45 119.53 45 219.51 45 219.53 For other combinations and accessories see modular system page 82/83 45 119.54 45 219.54 45 119.63 45 119.11 45 219.63 45 219.11 * Ø = Outer Diameter Catalogue 2.3 79

Practicus with connection flange Drain body Upper sections 1,8 l/sec flow rate Sealing water height 50 mm Practicus with connection flange with odour trap Shallow bed upper section in ABS Shallow bed upper section in ABS Shallow bed upper section in ABS Upper section in ABS Upper section in ABS 132 B H Ø 50 75 B 245 134 148 H 120 109 92 40 312 138 min. 10 max. 18 120 40 312 132 min. 10 max. 23 120 40 312 132 min. 10 max. 23 120 16 132 90 135 H 91 With slotted cover 138 x 138 mm and rim, class L 15, screwed. Art. # 48 963 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 904 With design cover Oval 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 905 With design cover Kessel 120 x 120 mm and rim, class L 15, Lock & Lift System Art. # 48 201 With slotted cover 138 x 138 mm, class K 3, screwed. Art. # 48 950 Ø H 50 100 75 Ø 50 Complete drain comprising a combination of the drain body and upper section Lateral outlet Art. # 45 150 Vertical outlet Art. # 45 250 Ø 75 Lateral outlet Art. # 45 170 45 150.51 45 250.51 45 170.51 45 150.53 45 150.54 45 150.63 45 150.11 45 250.53 45 250.54 45 250.63 45 250.11 45 170.53 45 170.54 45 170.63 45 170.11 Vertical outlet Art. # 45 270 45 270.51 45 270.53 45 270.54 45 270.63 45 270.11 Ø Lateral outlet Art. # 45 Vertical outlet Art. # 45 210 45.51 45.53 45 210.51 45 210.53 For other combinations and accessories see modular system page 82/83 45.54 45 210.54 45.63 45.11 45 210.63 45 210.11 * Ø = Outer Diameter 80 Catalogue 2.3

Practicus For interior installation according to EN 3 Illustration and dimensioned drawing Article description Ø* Article # with connection flange Variable upper section 150 91 min. 20 max. 76 135 1.8 l/sec flow rate Installation area 180 x 180 mm EN 3 Floor drain Practicus in PP, vertical outlet With removable odour trap. Sealing water height 50 mm. With lip seal and protective cover for use during construction. With upper section in ABS with slotted cover 138 x 138 mm in ABS, black, Class K 3 (able to withstand loads up to max. 300 kg). LGA Typetested and monitored guaranteed with tested quality Ø 45 210.40 with connection flange Variable upper section 150 91 min. 20 max. 76 135 1.8 l/sec flow rate Installation area 180 x 180 mm EN 3 Floor drain Practicus in PP, Ø..., vertical outlet With removable odour trap. Sealing water height 50 mm. With lip seal and protective cover for use during construction. With upper section in ABS with slotted cover 138 x 138 mm, screwed, Class K 3 (able to withstand loads up to max. 300 kg). LGA Typetested and monitored guaranteed with tested quality Ø 50 Ø 75 Ø 45 250.11 45 270.11 45 210.11 * Ø = Outer Diameter with connection flange Variable upper section 132 150 148 min. 20 max. 76 1.8 l/sec flow rate Installation area 220 x 180 mm EN 3 92 Floor drain Practicus in PP, lateral outlet 2.5 With removable odour trap. Sealing water height 50 mm. With lip seal and protective cover for use during construction. With upper section in ABS with slotted cover 138 x 138 mm in ABS, black, Class K 3 (able to withstand loads up to max. 300 kg). Catalogue 2.3 LGA Typetested and monitored guaranteed with tested quality Ø 45.40 with glue flange Floor drain Practicus Ø 45 218.11 Variable upper section min. 30 max. 70 105 348 150 135 1.8 l/sec flow rate Installation area 180 x 180 mm EN 3 in PP, vertical outlet With removable odour trap. Sealing water height 50 mm. With lip seal, retaining ring and seal and protective cover for use during construction. With glue flange and counter flange. With upper section made of polymer with slotted cover 138 x 138 mm, screwed, Class K 3 (able to withstand loads up to max. 300 kg). LGA Typetested and monitored guaranteed with tested quality 81

100 25 Ecoguss and Practicus Point drains System Variofix shallow bed upper sections 312 138 min. 10 max. 18 312 138 min. 23 max. 40 312 132 40 40 40 min. 10 max. 21 in ABS with slotted cover/rim 138 mm, Class L 15, screwed. For tile thickness of 816 mm. Art. # 48 963 120 with antislip drain cover and rim, Class L 15. Art. # 48 965 138 mm 120 with recessed polymer cover for onsite tiling 132 mm and rim, Class K 3, with locking system. Art. # 48 906 120 Upper sections 18 138 93 in ABS in ABS completely in ABS, tileable with slotted cover/rim 138 mm screwed, Class L 15 Art. # 48 951 with slotted cover 138 mm, Class K 3, in stainless in ABS, black steel, screwed Art. # 48 193 Art. # 48 950 138 mm, Class K 3, L 15 / M with slotted with antislip cover, screwed drain cover, Art. # 48 977 Class L 15 / M Art. # 48 177 mm, made of polymer, Class K 3 with rim Art. # 48 211 132 with rim in polymer Art. # 48 210 Accessories 348 23 30 40 312 150 120 136 150 158 50 106 Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # 48 410 Mesh fabric for Art. # 48 410 Art. # 046056 Drain bodies Ecoguss and Practicus All drain bodies: 1.8 l/sec flow rate Sealing water height 50 mm Pressure sealing flange, Ø 273 mm, Art. # 48 402 Elastomer waterproof membrane in NBR for Art. # 48 402 Art. # 48 981 Ecoguss with removable odour trap 82 Catalogue 2.3 132 B H Intermediate section with glue flange in ABS, for shallow bed gasket Art. # 48 900 135 H 91 Ø 58 78 83 58 78 83 Extension section in PP, with lip seal without lateral inlet Art. # 48 987 with lateral inlet Art. # 48 989 Lateral outlet B 245 134 134 148 H Article # 120 48 358 109 48 378 108 48 383 92 48 311 Vertical outlet 100 48 458 48 478 48 483 48 411

Variofix shallow bed upper sections with design covers KESSELmodular design Combinations for any installation requirement 312 132 40 min. 10 max. 23 in ABS 120 design covers 120 mm and rim, Class K 3 / L 15. For tile thickness of 821 mm, with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) Parade (Cl.K 3) Slot (Cl.K 3) Sticks (Cl.K 3) with Lock & Lift Art. # 48 904 48 905 48 621 48 613 48 615 48 624 48 619 48 617 without Lock & Lift Art. # 48 625 48 626 48 620 48 612 48 614 48 623 48 618 48 616 Upper sections with design covers 16 132 in ABS design covers 90 with Lock & Lift Art. # 120 mm and rim, Class K 3 / L 15 with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) 48 201 48 202 48 221 48 213 48 215 Parade (Cl.K 3) 48 224 Slot (Cl.K 3) 48 219 Sticks (Cl.K 3) 48 217 without Lock & Lift Art. # 48 225 48 226 48 220 48 212 48 214 48 223 48 218 48 216 39 14 Multistop Hair filter as an odour, made of foam, rodent polymer and insect stop Art. # 48 700 Art. # 48 500 Sludge trap Art. # 48 168 Odour trap All drain bodies: 1.8 l/sec flow rate Sealing water height 50 mm 132 Practicus in PP with removable odour trap B for all upper sections System, sealing water height 50 mm according to norm Art. # 48 600 H 79 76 42 Certification no. Z19.171719 FireKit Fire protection insert Only for Ecoguss / Practicus drains with vertical outlet and odour trap Art. # 48 100 135 H 91 Ø 50 75 50 75 Catalogue 2.3 Lateral outlet B 245 134 148 Delivery without dowels Fire protection panel 380 mm, 20 mm thick Art. # 48 995 Kunkel dowels KDM 6x50, 4 dowels Art. # 48 994 H Article # 120 45 150 109 45 170 92 45 Vertical outlet 100 45 250 45 270 45 210 166 Insulating body Certification no. Z19.171719 QuickFit the passage seal for core drillings for drain bodies with vertical outlet with fire protection Art. # 48 990 without fire protection Art. # 48 991 360 mm 120 fits all Ecoguss / Practicus drain bodies with vertical outlet Art. # 48 952 83

84 Catalogue 2.3

Bathroom drains Catalogue 2.3 85

Professional advantages The bathroom drain collection Bathroom drains The Ultraflat Ideal for renovation work in existing buildings Variable upper section Now also available in Ø 50 With shallow bed gasket Optimised design and function With connection flange With glue flange Removable hair filter made of polymer Lock & Lift System: Simultaneous locking and removal mechanism Bathroom drain The Ultraflat with shallow bed gasket minimum installation height 69 mm Design in a nutshell Installation height 69 mm Up to the upper edge of the flange 86 Catalogue 2.3 incl. cover 1 2 3 4 5 6 7 8 Installation height 54 mm The prizewinning design covers from the 2012 collection are a first rate combination of aesthetics and technology. Eight different stainless steel covers provide enough versatility to meet individual design needs. The recessed cover for onsite tiling allow the cover to be matched to the floor. Products see page 88 Kessel

Point drains System Bathroom drain The Vertical Point drains System Variable upper section Compact drain body makes it ideal for renovations Ø 50 Ø 40 Flexible connection option Ø 40 or Ø 50, can be sawn off Multistop: Ideal odour trap for drains that dry out frequently. Can be retrofitted to installed drains. Rodent / insect trap... foam trap and... The invisible drain with recessed cover for onsite tiling and locking system odour trap! Invisible Oval Spot Cross Festival Parade Slot Sticks Products see page 89 Catalogue 2.3 87

Bathroom drains The Ultraflat System Illustration and dimensioned drawing Article description Ø* Article # 92 83 40 with glue flange 348 130 50 Bathroom drain The Ultraflat in ABS, with lateral outlet and one lateral inlet Ø 40 with glue flange With removable odour trap. With upper section in ABS with slotted cover 120 x 120 mm and rim, screwed, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50 45 700.91 * Ø = Outer Diameter 1 1 1 2 1.0 l/sec flow rate Installation area 350 x 350 mm min. 69 min. 85 min. 85 for shallow bed gasket 201 135 33 130 54 54 54 245 with connection flange 150 130 227 Art. # 45 700.63 150 130 227 16 16 Art. # 45 700.71 88 Catalogue 2.3 Flow rate Ø 40: 0.6 l/sec 2 Ø 50: 1 l/sec Installation area 300 x 300 mm 50 50 Flow rate Ø 50: 1.0 l/sec 2 Ø 50: 0.9 l/sec Installation area 250 x 300 mm Bathroom drain The Ultraflat for shallow bed gasket with lowest installation height in ABS, soundabsorbing, Ø... lateral outlet 2.5 With removable odour trap. With upper section in ABS with slotted cover 120 x 120 mm, Class K 3 (able to withstand loads up to max. 300 kg). Bathroom drain The Ultraflat in ABS, soundabsorbing, Ø 50 lateral outlet 2.5 With upper section in ABS 1 With odour trap With lip seal. with design cover Kessel 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 (able to withstand loads up to max. 1.5 to). Additional design covers see page 91 With upper section made of polymer 2 With Multistop: Odour, foam, rodent and insect stop with cover 120 x 120 mm Class K 3 (able to withstand loads up to max. 300 kg). 1 Ø 40 45 740.20 2 Ø 50 45 750.20 1 Ø 50 45 700.63 2 Ø 50 45 700.71

Bathroom drain The Vertical System Illustration and dimensioned drawing Article description Ø* Article # with connection flange min. 9 max. 67 50 40 150 130 205 Bathroom drain The Vertical in ABS, Ø 50/40 vertical outlet With removable odour trap. With upper section in ABS with slotted cover 120 x 120 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50/40 45 254.20 1.2 l/sec flow rate Installation area 160 x 160 mm EN 3 LGA Typetested and monitored guaranteed with tested quality Bathroom drain Giro For interior installation according to EN 3 System Illustration and dimensioned drawing Article description Ø* Article # with connection flange Variable upper section min. 65 max. 85 133 Bathroom drain Giro in PP, soundabsorbing, Ø 50, flexible outlet With removable odour trap, fixed lip seal. With rotatable lateral inlet Ø 50 With upper section in ABS with slotted cover 120 x 120 mm Class K 3 (able to withstand loads up to max. 300 kg). Ø 50 45 101.20 Inlet flexible outlet 109 241 360 rotatable Art. # 45 101.64 1.3 l/sec flow rate Installation area 350 x 250 mm EN 3 LGA Typetested and monitored guaranteed with tested quality Catalogue 2.3 89

100 25 Bathroom drains The Ultraflat and The Vertical Point drains System Variofix shallow bed upper sections 312 138 min. 10 max. 18 312 138 min. 23 max. 40 312 132 40 40 min. 10 max. 21 40 in ABS with slotted cover/rim 138 mm, Class L 15, screwed. For tile thickness of 816 mm. Art. # 48 963 120 with antislip drain cover and rim, Class L 15. Art. # 48 965 138 mm 120 with recessed polymer cover for onsite tiling 132 mm and rim, Class K 3, with locking system. Art. # 48 906 120 Upper sections 18 138 93 in ABS in ABS completely in ABS, tileable with slotted cover/rim 138 mm screwed, Class L 15 Art. # 48 951 with slotted cover 138 mm, Class K 3, in stainless in ABS, black steel, screwed Art. # 48 193 Art. # 48 950 138 mm, Class K 3, L 15 / M with slotted with antislip cover, screwed drain cover, Art. # 48 977 Class L 15 / M Art. # 48 177 mm, made of polymer, Class K 3 with rim Art. # 48 211 132 with rim in polymer Art. # 48 210 Accessories 348 23 30 40 312 150 120 Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # 48 410 Pressure sealing flange, Ø 273 mm, Art. # 48 402 Intermediate section with glue flange in ABS, for shallow bed gasket Art. # 48 900 Drain bodies 1.0 l/sec flow rate *) Sealing water height 30 mm Elastomer waterproof membrane in NBR for Art. # 48 410, 48 402, 48 900 Art. # 48 981 1.0 l/sec flow rate *) Sealing water height 30 mm 150 150 150 69 54 227 50 69 54 269 Ø 75 69 Ø 40 Ø 50 The Ultraflat in ABS Lateral outlet Ø 50/75, with removable odour trap Lateral outlet Ø 50 Art. # 45 700 Lateral outlet Ø 75 Art. # 45 770 90 Catalogue 2.3 The Ultraflat in ABS Lateral outlet Ø 50, with removable odour trap with lateral inlet Ø 40, lateral outlet Ø 50 Art. # 45 701

Variofix shallow bed upper sections with design covers KESSELmodular design Combinations for any installation requirement 312 132 40 min. 10 max. 23 in ABS 120 design covers 120 mm and rim, Class K 3 / L 15. For tile thickness of 821 mm, with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) Parade (Cl.K 3) Slot (Cl.K 3) Sticks (Cl.K 3) with Lock & Lift Art. # 48 904 48 905 48 621 48 613 48 615 48 624 48 619 48 617 without Lock & Lift Art. # 48 625 48 626 48 620 48 612 48 614 48 623 48 618 48 616 Upper sections with design covers 16 132 in ABS design covers 90 with Lock & Lift Art. # 120 mm and rim, Class K 3 / L 15 with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) 48 201 48 202 48 221 48 213 48 215 Parade (Cl.K 3) 48 224 Slot (Cl.K 3) 48 219 Sticks (Cl.K 3) 48 217 without Lock & Lift Art. # 48 225 48 226 48 220 48 212 48 214 48 223 48 218 48 216 136 150 158 50 106 39 14 79 Extension section in PP, with lip seal without lateral inlet Art. # 48 987 with lateral inlet Art. # 48 989 0.6 l/sec flow rate *) Sealing water height 30 mm The Ultraflat in ABS 63 Multistop as an odour, foam, rodent and insect stop Art. # 48 500 with sealing flange for shallow bed gasket, with removable odour trap Lateral outlet Ø 40, Art. # 45 740 33 54 201 135 245 40 Hair filter made of polymer Art. # 48 700 1.0 l/sec flow rate *) Sealing water height 30 mm Lateral outlet Ø 50, Art. # 45 750 Catalogue 2.3 Sludge trap made of polymer Art. # 48 168 1.2 l/sec flow rate *) Sealing water height 50 mm Odour trap The Vertical in ABS Vertical outlet Ø 50/40 with removable odour trap fits all upper sections System Art. # 45 254 for all upper sections System, sealing water height 50 mm according to norm Art. # 48 600 *) according to EN 3 20 mm threshold 50 40 150 98 205 91

Professional advantages The bathroom drain collection Bathroom drains The Superflat For low installation heights 95 mm Variable upper section Variable upper section With sound absorption Lowest installation height flexible outlet With shallow bed gasket Optimised design and function With flexible outlet Sealing system safe to install Removable hair filter made of polymer Lock & LiftSystem Simultaneous locking and removal mechanism Multistop: Ideal odour trap for drains that dry out frequently. Can be retrofitted to installed drains. Rodent / insect trap... foam trap and... odour trap! Products see pages 94 95 92 Catalogue 2.3

Point drains System 100 Point drains System 100 Bathroom drains Classic Compact and high performance Variable cover/upper section Variable cover/upper section Twin sealing flanges Our classical products With glue flange The invisible drain with recessed cover for onsite tiling and locking system Tip: Minimum installation depth for bathroom renovation Bathroom drain, System 100 The Superflat Page 94 90 mm 1 2 3 4 5 6 7 8 910 Design covers made of solid stainless steel and recessed covers for onsite tiling for a modern bathroom design Our design covers received the red dot award for high design quality in the Product Design category 2010. Products see pages 96 97 Catalogue 2.3 93

Bathroom drains The Superflat System 100 Illustration and dimensioned drawing Article description Ø* Article # min. 104 max. 112 with shallow bed gasket 97 86 332 107 Installation area 260 x 180 mm Variable upper section flexible outlet 50 min. 19 max. 27 75 Bathroom drain The Superflat for shallow bed gasket with lowest installation height in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. No lateral adjustment of the slotted cover With upper section in ABS with slotted cover 95 x 95 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50 42 701.91 80 32 40 with shallow bed gasket 312 120 118 130 min. 10 max. 23 50 Variable cover/ Upper section flexible outlet min. 45 max. Bathroom drain The Superflat in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. With Variofix shallow bed upper section in ABS with design cover Oval 120 x 120 mm and rim in stainless steel, for tile thicknesses of 821 mm, Class L 15 (able to withstand loads up to max. 1.5 to), with Lock & Lift System. with standard slotted cover 95 x 95 mm, for tile thicknesses of 614 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50 42 701.54 Ø 50 42 701.50 Art. # 42 701.54 Installation area 260 x 180 mm 86 38 40 with glue flange 332 132 248 min. 25 max. 90 50 75 Installation area 260 x 180 mm * Ø = Outer Diameter Variable upper section 94 Catalogue 2.3 50 flexible outlet Bathroom drain The Superflat in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. With glue flange and counter flange With upper section in ABS with recessed polymer drain cover for onsite tiling x mm and rim, Class K 3 (able to withstand loads up to max. 300 kg), with locking system, for tile thickness up to 10 mm. Ø 50 42 701.95

Bathroom drains The Superflat System 100 Ø* Illustration and dimensioned drawing Article description Article # min. 10 max. 60 80 with connection flange 107 250 Variable upper section flexible outlet Bathroom drain The Superflat in PP, soundabsorbing, Ø 50 flexible outlet, 0.8 l/sec flow rate With removable odour trap. With lateral inlet Ø 40 and fixed lip seal. With upper section in ABS with slotted cover 100 x 100 mm, min. installation height 90 mm, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50 42 701.20 Installation area 260 x 180 mm Catalogue 2.3 95

Classic System 100 Illustration and dimensioned drawing Article description Ø* Article # Art. # 40 150.54 with shallow bed gasket 90 Ø 312 120 Ø 50 min. 10 max. 23 Variable cover/ Upper section min. 45 max. Installation area 220 x 180 mm Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With fixed lip seal. With Variofix shallow bed upper section in ABS 1 with design cover Oval 120 x 120 mm and rim, for tile thicknesses 821 mm, with Lock & Lift System, Class L 15 (able to withstand loads up to max. 1.5 to). 2 with standard slotted cover 95 x 95 mm, for tile thicknesses 614 mm, Class K 3 (able to withstand loads up to max. 300 kg). 3 with slotted cover 138 x 138 mm and rim, for tile thicknesses 816 mm, Class L 15 (able to withstand loads up to max. 1.5 to). 1 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 2 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 3 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 EN 3 40 150.54 40 170.54 40 250.54 40 270.54 40 150.50 40 170.50 40 250.50 40 270.50 40 150.51 40 170.51 40 250.51 40 270.51 LGA Typetested and monitored guaranteed with tested quality Art. # 40 159.50 Art. # 40 250.90 * Ø = Outer Diameter Twin sealing flanges 90 332 312 100 Variable cover/ Upper section min. 8 max.16 Installation area 260 x 180 mm with glue flange 152 141 Variable upper section 332 107 min. 55 max.120 96 Catalogue 2.3 min. 20 max. 60 Installation area 180 x 180 mm Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50 mm. With fixed lip seal. With glue flange and counter flange With Variofix shallow bed upper section in ABS with slotted cover 95 x 95 mm, for tile thickness 614 mm, Class K 3 (able to withstand loads up to max. 300 kg). Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50 mm. With fixed lip seal. With glue flange and counter flange With upper section in ABS with slotted cover 100 x 100 mm, Class K 3 (able to withstand loads up to max. 300 kg). Lateral outlet Ø 50 40 159.50 Ø 75 40 179.50 Vertical outlet Ø 50 40 259.50 Ø 75 40 279.50 EN 3 LGA Typetested and monitored guaranteed with tested quality Lateral outlet Ø 50 40 150.90 Ø 75 40 170.90 Vertical outlet Ø 50 40 250.90 Ø 75 40 270.90 EN 3 LGA Typetested and monitored guaranteed with tested quality

Classic System 100 Illustration and dimensioned drawing Article description Ø* Article # with connection flange 90 Variable upper section 130 185 min. 25 max. 90 Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50 mm. With fixed lip seal. With upper section in ABS 1 with recessed polymer drain cover for onsite tiling x mm, Class K 3 (able to withstand loads up to max. 300 kg), with locking system. 2 with slotted cover 100 x 100 mm, Class K 3 (able to withstand loads up to max. 300 kg). 1 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 2 Lateral outlet Ø 50 Ø 75 Vertical outlet Ø 50 Ø 75 40 150.66 40 170.66 40 250.66 40 270.66 40 150.20 40 170.20 40 250.20 40 270.20 Art. # 40 150.20 Installation area 220 x 180 mm with connection flange Variable upper section 90 200 120 185 min. 25 max. 65 Bathroom drain Classic in ABS, Ø... lateral outlet 2.5, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50mm. With fixed lip seal. Upper section with sealing flange for use with 1 4 mm vinyl / synthetic flooring with slotted cover made of polymer, grey, Class K 3 (able to withstand loads up to max. 300 kg). EN 3 Ø 50 Ø 75 LGA Typetested and monitored guaranteed with tested quality 40 150.30 40 170.30 Art. # 40 150.30 Installation area 220 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with connection flange Variable upper section 135 Installation area 180 x 180 mm * Ø = Outer Diameter 200 120 min. 25 max. 65 Bathroom drain Classic in ABS, Ø... vertical outlet, 0.8 l/sec flow rate With removable odour trap. Sealing water height 50mm. With fixed lip seal. Upper section with sealing flange for use with 1 4 mm vinyl / synthetic flooring with slotted cover made of polymer, grey, Class K 3 (able to withstand loads up to max. 300 kg). Ø 50 Ø 75 EN 3 40 250.30 40 270.30 LGA Typetested and monitored guaranteed with tested quality Catalogue 2.3 97

Bathroom drains Classic, The Superflat and Floordrain ME Point drains System 100 Variofix shallow bed upper sections 312 100 min. 10 max. 16 312 150 min. 10 max. 18 312 132 min. 10 max. 21 in ABS with standard slotted cover, Class K 3. For tile thickness of 614 mm. Art. # 47 901 95 mm with slotted cover/rim 150 x 150 mm, Class L 15, screwed. For tile thickness of 816 mm. Art. # 47 902 with recessed polymer cover for onsite tiling mm and rim, Class L 15, with locking system Art. # 47 906 Upper sections 132 100 25 120 120 120 40 40 40 in PP in ABS in ABS, tileable with sealing flange for use with 1 4 mm vinyl / synthetic flooring, slotted cover made of polymer, Ø 120 mm, Class K 3. Art. # 27 192 with slotted cover 100 mm, Class K 3. Art. # 27 165 mm, made of polymer, Class K 3 with rim with rim in polymer Art. # 27 211 Art. # 27 210 in ABS with slotted cover 150 x 150 mm and rim, Class L 15, nonslip. Art. # 27 176 Accessories 332 Glue flange with counter flange (also for compound seal) Art. # 43 401 Drain bodies 39 Elastomer waterproof membrane in PVC Art. # 43 710 in EPDM Art. # 43 730 Bathroom drain Classic in ABS Ø 50 75 Extension section The waterproof membrane in PVC and EPDM are not suitable for connections to asphalt sheeting. in PP, with pressure sealing flange, flange width 63 mm Art. # 27 198 90 500 mm 0.8 l/sec flow rate *) Sealing water height 50 mm Ø156 Ø129 Extension section 98 Catalogue 2.3 184 with removable odour trap Lateral outlet Vertical outlet Art. # 40 150 Art. # 40 250 Art. # 40 170 Art. # 40 270 Ø 65 Ø 50 75 in ABS, with glue flange and counter flange Art. # 27 199 Mesh fabric for Art. # 43 401 Art. # 219153A 135 Ø156 Ø129 Ø without removable odour trap Lateral outlet Vertical outlet Art. # 40 151 Art. # 40 251 Art. # 40 171 Art. # 40 271 With glue flange and waterproof membrane premounted in PVC 1200 x 1200 mm Art. # 43 401.91 1800 x 2000 mm Art. # 43 401.93 Waterproof membrane in PVC without punchedout hole 1800 x 2000 mm Art. # 43 711 Glue Art. # 43 719 1.8 l/sec flow rate *) 55 41 Floordrain ME in ABS 30 75 Three lateral inlets Ø 55, one lateral outlet Ø 82, with removable odour trap Glue connection according to BS 5255 Art. # 37 3001 46 82 168

KESSELmodular design Combinations for any installation requirement 312 132 min. 10 max. 23 312 132 min. 10 max. 23 in ABS with design cover KESSEL 120 x 120 mm and rim, Class L 15. For tile thickness of 821 mm, Lock & Lift System. Art. # 47 904 with design cover Oval 120 x 120 mm and rim, Class L 15. For tile thickness of 821 mm, Lock & Lift System. Art. # 47 905 Extension section in ABS with lip seal Art. # 27 146 Sludge trap made of polymer Art. # 27 168 120 120 40 40 132 90 16 in ABS design covers with Lock & Lift Art. # without Lock & Lift Art. # 120 mm and rim, Class K 3 / L 15 with or without Lock & Lift System. Kessel (Cl.L 15) Oval (Cl.L 15) Spot (Cl.K 3) Cross (Cl.K 3) Festival (Cl.K 3) 27 201 27 202 27 221 27 213 27 215 27 225 27 226 27 220 27 212 27 214 Parade (Cl.K 3) 27 224 27 223 Slot (Cl.K 3) 27 219 27 218 Sticks (Cl.K 3) 27 217 27 216 Multistop as an odour, foam, rodent and insect stop Art. # 43 500 Hair filter 37 14 made of polymer, Ø 108 mm Art. # 43 700 Transition section with sealing ring Ø 50 Ø 50/75 Art. # 27 126 Ø 50/40 Art. # 27 118 0.8 l/sec flow rate *) Sealing water height 30 mm 32 Conversion kit, DIN pushfit connection for article numbers: 37 3001 Consist of 3 inlet adapter Ø 50 mm, 1 outlet adapter Ø 75 mm and 1 pushfit connection for upper section Ø, DIN 19560 Art. # 37 3008 32 Conversion kit, DIN glue connection for article number: 37 3001 Consist of 3 inlet adapter Ø 50 mm, and 1 outlet adapter Ø 75, DIN 19560 Art. # 37 3007 *) according to EN 3 20 mm threshold 80 130 50 44 69 80 40 118 130 50 44 69 80 40 118 130 50 44 69 Bathroom drain The Superflat in PP Lateral outlet Ø 50, with removable odour trap Without lateral inlet Art. # 42 700 One lateral inlet Ø 40 Art. # 42 701 Three lateral inlets Ø 40 Art. # 42 703 Catalogue 2.3 99

100 Catalogue 2.3

Catalogue 2.3 101

Professional advantages Linearis Comfort Stainless steel cover is reversable and tileable Tip: Minimum installation depth for bathroom renovation Channel length: 750 mm, 850 mm, 950 mm, 1050 mm, 1150 mm. Shower channel, System Linearis Comfort 93 mm Waterproofing flange height only 86 mm! 63 l/min (at 10 mm threshold) 1 2 3 4 5 6 7 8 910 Vertically adjustable frame Stainless steel channel and rim can be adjusted from 722 mm to meet on site tile/ granite/marble thicknesses. For natural stone floorings up to 20 mm thickness. Installation on room or wall side of shower Feet can be pivoted away as required for wallside installation. Channel locking mechanism as standard Multistop (optional) Odour, foam, rodent and insect stop Hair filter (optional) Exemplary hygiene smooth, easyclean surface, selfcleaning effect The new design shower channel Linearis Comfort bright ideas for individual customised concepts Design right down the line Shower channel Crystal Shower channel Light Shower channel Logo Crystal AB Emerald AB Blue Zircon Siam AB Capri Blue Products see pages 104 107 102 Catalogue 2.3

Linearis Compact Line Draining System Tip: Minimum installation depth for bathroom renovation Stainless steel cover is reversable and tileable Shower channel, System Linearis Compact 80 mm Waterproofing flange height only 65 mm! Channel length: 300 mm, 450 mm, 550 mm, 650 mm, 750 mm, 850 mm, 950 mm, 1050 mm, 1150 mm. 1 2 3 4 5 6 7 8 91 Hygienic design single piece body and channel cover 36 l/min (at 10 mm threshold) Installation in the room or on the wall The length of the feet can be shortened on the left or right if mounted to the wall. Flow rate with counter slope up to 36 l/min. at 10 mm threshold. Flow rate increased to 54 l/min. with use of Multistop odour trap. Cover and rim made of stainless steel. Cleaning and maintenance made easy Multistop (optional) Odour, foam, rodent and insect stop Hair filter (optional) The shower channel Linearis Compact 9 channel lengths to meet all installation situations Products see page 108 109 Catalogue 2.3 103

93108 mm 86 mm 93108 mm 86 mm 93108 mm 86 mm 93108 mm 86 mm Linearis Comfort Channel Illustration Article description Article # length L: 750 / 850 / 950 / 1050 / 1150 mmm 50 With installation supports Shower channel Linearis Comfort with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover and rim (Channel cover can be reversed and tiled on site), Class K 3 35 mm 66 mm 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold 750 mm 850 mm 950 mm 1050 mm 1150 mm 45 600.83 45 600.84 45 600.85 45 600.86 45 600.87 L: 750 / 850 / 950 / 1150 mm Shower channel Linearis Comfort Light with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover with maintenancefree induction technology and white LED lights (other colours available upon request), 15 m power cable Handles loads up to 100 kg 35 mm 750 mm 850 mm 950 mm 1150 mm 45 600.83 IC 45 600.84 IC 45 600.85 IC 45 600.87 IC 50 66 mm With installation supports 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold L: 750 / 850 / 950 / 1150 mm Shower channel Linearis Comfort Crystal with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover with 3 inlaid colorful crystal settings with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 750 mm 850 mm 950 mm 1150 mm 45 600.83 ISL 45 600.84 ISL 45 600.85 ISL 45 600.87 ISL 35 mm 50 66 mm With installation supports L: 750 / 850 / 950 / 1150 mm 50 With installation supports 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold Shower channel Linearis Comfort Logo with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover with customized laser engraving of company logos, famous quotes, personal names or emblems, with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 35 mm 66 mm 60 l/min flow rate without threshold 63 l/min flow rate with 10 mm threshold 104 Catalogue 2.3 Other crystal colours see page 102 750 mm 850 mm 950 mm 1150 mm 45 600.83 ILL 45 600.84 ILL 45 600.85 ILL 45 600.87 ILL

Accessories Illustration Article description Channel length Article # Installation aid Replaces the screed underlining Including mounting adhesive Linearis Comfort Suitable for all lengths, can be individually shortened 48 640 Example: Installation aid can be individually shortened Suitable for all channel lengths from 750 to 1150 mm Collar seal As a seal below the ceramic surfaces made of modified polyethylene membrane with fleece on both sides with printed cutting template suitable for all channel lengths Including mounting adhesive 48 638 Catalogue 2.3 105

Shower channel Linearis Comfort Line Draining System Shower channel upper sections Linearis Comfort L: 750 / 850 / 950 / 1050 / 1150 mm L: 750 / 850 / 950 / 1150 mm 35 mm 35 mm 66 mm 66 mm Shower channel upper section Linearis Comfort in ABS, with removable odour trap, sealing water height 50 mm Cover and rim (Channel cover can be reversed and tiled on site) Class K 3 Shower channel upper section Linearis Comfort Light in ABS, with removable odour trap, sealing water height 50 mm With maintenancefree induction technology and white LED lights (other colours available upon request), 15 m power cable Handles loads up to 100 kg Length 750 mm 850 mm 950 mm 1050 mm 1150 mm 750 mm 850 mm 950 mm 1150 mm Article # 48 928 S 48 929 S 48 930 S 48 931 S 48 932 S 48 928 IC 48 929 IC 48 930 IC 48 932 IC L: 750 / 850 / 950 / 1150 mm With installation supports 35 mm 66 mm Shower channel upper section Linearis Comfort Logo in ABS, with removable odour trap, sealing water height 50 mm With customized laser engraving of company logos, famous quotes, personal names or emblems, with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 750 mm 850 mm 950 mm 1150 mm 48 928 ILL 48 929 ILL 48 930 ILL 48 932 ILL Accessories 150 348 23 136 50 106 30 Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # 48 410 Pressure sealing flange, Ø 273 mm, Art. # 48 402 Extension section in PP, with lip seal without lateral inlet Art. # 48 987 with lateral inlet Art. # 48 989 158 Drain bodies 69 54 150 227 50 69 54 150 Total installation height including upper section 269 70 69 40 min 115 max 153 150 50 50 40 150 98 205 The Ultraflat in ABS Lateral outlet Ø 50/75, with removable odour trap Lateral outlet Ø 50 Art. # 45 700 Lateral outlet Ø 75 Art. # 45 770 The Ultraflat in ABS 106 Catalogue 2.3 Lateral outlet Ø 50, with removable odour trap with lateral inlet Ø 40, lateral outlet Ø 50 Art. # 45 701 The Vertical in ABS Vertical outlet Ø 50/40 with removable odour trap fits all upper sections System Art. # 45 254

L: 750 / 850 / 950 / 1150 mm Other crystal colours see page 102 L: 750 / 850 / 950 / 1050 / 1150 mm 35 mm 35 mm 66 mm 66 mm Shower channel upper section Linearis Comfort Crystal in ABS, with removable odour trap, sealing water height 50 mm With 3 inlaid colorful crystal settings with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg Shower channel upper section Linearis Comfort Wengé in ABS, with removable odour trap, sealing water height 50 mm Handles loads up to 100 kg KESSELmodular design Combinations for any installation requirement Length 750 mm 850 mm 950 mm 1150 mm 750 mm 850 mm 950 mm 1050 mm 1150 mm Article # 48 928 ISL 48 929 ISL 48 930 ISL 48 932 ISL on request on request on request on request on request L: 750 / 850 / 950 / 1050 / 1150 mm With installation supports 35 mm 66 mm Shower channel upper section Linearis Comfort Burlwood in ABS, with removable odour trap, sealing water height 50 mm Handles loads up to 100 kg 750 mm 850 mm 950 mm 1050 mm 1150 mm on request on request on request on request on request 123 116 Multistop as an odour, foam, rodent and insect stop Art. # 48 400 38 Hair filter made of polymer Art. # 48 800 48 166 QuickFit the passage seal for core drilling for drain body Ecoguss and Practicus, vertical outlet without fire protection Art. # 48 991 132 B H 135 H 91 Ecoguss with removable odour trap Practicus in PP with removable odour trap Ø 58 78 83 Lateral outlet B 245 134 134 148 H Article # 120 48 358 109 48 378 108 48 383 92 48 311 Vertical outlet H Article # 100 48 458 48 478 48 483 48 411 Ø 50 75 B 245 134 148 Lateral outlet H Article # 120 45 150 109 45 170 92 45 Vertical outlet H Article # 100 45 250 45 270 45 210 Catalogue 2.3 107

80 mm 65 mm Linearis Compact Channel Illustration Article description Article # length 60 mm L: 300/450/550/650/750/850/950/ / 1050 / 1150 mm Ø 50 Installation depth only 80 mm Shower channel Linearis Compact with drain body in ABS Ø 50, lateral outlet with removable odour trap, sealing water height 22 mm cover and rim (Channel cover can be reversed and tiled on site), Class K 3 35 mm 300 mm 450 mm 550 mm 650 mm 750 mm 850 mm 950 mm 1050 mm 1150 mm 45 600.59 45 600.60 45 600.61 45 600.62 45 600.63 45 600.64 45 600.65 45 600.66 45 600.67 With installation supports Linearis Compact 30 l/min flow rate without threshold 36 l/min flow rate with 10 mm threshold Ø* Illustration Article description Article # 123 123 Illustration shows 1 Odour trap 1 sealing water height 22 mm 2 sealing water height 50 mm only for shower channel Linearis Compact and Linearis Comfort Multistop as an odour, foam, rodent and insect stop 48 603 48 602 48 400 38 116 48 Hair filter 48 800 108 Catalogue 2.3

Accessories Illustration Article description Channel length Article # Installation aid Replaces the screed underlining Including mounting adhesive Linearis Compact Suitable for all lengths, can be individually shortened 48 639 Example: Installation aid can be individually shortened Suitable for all channel lengths from 300 to 1150 mm Collar seal As a seal below the ceramic surfaces made of modified polyethylene membrane with fleece on both sides with printed cutting template suitable for all channel lengths Including mounting adhesive 48 638 Catalogue 2.3 109

122 175 mm 69 mm Shower channel Linearis Super60 System Channel Illustration Article description Article # length 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm With installation supports Ø 50 m Shower channel Linearis Super60 in ABS, cover and rim (Channel cover can be reversed and tiled on site) consisting of: shower channel upper section in ABS, with perimeter flange to the shallow bed gasket; with tileable access cover and locking system with bathroom drain body The Ultraflat in ABS, Ø 50, lateral outlet, with removable odour trap, sealing water height 30 mm Class K 3 45 mm 66 l/min flow rate without threshold 72 l/min flow rate with 10 mm threshold 750 mm 850 mm 950 mm 1150 mm 45 700.83 45 700.84 45 700.85 45 700.87 KESSELProfessional advantages Shower channel Linearis Super60 Flow rate from 6672 l/min Wide channel with high flow rate Easy cleaning Channel cover can be reversed and tiled on site Lengths 750 / 850 / 950 / 1150 mm Also suitable for installation on door side Unbeatable! Full accesss for maintenance and cleaning Catalogue 2.3

92 144 mm 69 mm Shower channel Linearis Channel Illustration Article description Article # length 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm Ø 50 m Shower channel Linearis in ABS, cover and rim consisting of: shower channel upper section in ABS, with perimeter flange to the shallow bed gasket; with tileable access cover and locking system with bathroom drain body The Ultraflat in ABS, Ø 50, lateral outlet, with removable odour trap, sealing water height 30 mm Class K 3 40 mm 750 mm 850 mm 950 mm 1150 mm 45 700.73 45 700.74 45 700.75 45 700.77 With installation supports 24 l/min flow rate with 10 mm threshold KESSELProfessional advantages Shower channel Linearis Flow rate 24 l/min Extremely narrow and elegant channel Easy cleaning Particularly suitable for installation on the wall side Access opening can be tiled Lengths 750 / 850 / 950 / 1150 mm Full accesss for maintenance and cleaning Catalogue 2.3 111

Shower channel Linearis Super60 and Linearis Line Draining System Shower channel upper sections Linearis Super60 60 mm 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm L: 750 / 850 / 950 / 1150 mm 140 mm 45 mm 45 mm Shower channel upper section Linearis Super60 in ABS, with tileable access cover Cover and rim (Channel cover can be reversed and tiled on site) Class K 3 Shower channel upper section Linearis Super60 Light in ABS, with tileable access cover With maintenancefree induction technology and white LED lights (other colours available upon request), 15 m power cable Handles loads up to 100 kg Length 750 mm 850 mm 950 mm 1150 mm 750 mm 850 mm 950 mm 1150 mm Article # 48 908 48 909 48 910 48 912 48 908 IC 48 909 IC 48 910 IC 48 912 IC 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm With installation supports Shower channel upper section Linearis 45 mm Shower channel upper section Linearis Super60 Logo in ABS, with tileable access cover With customized laser engraving of company logos, famous quotes, personal names or emblems, with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg 750 mm 850 mm 950 mm 1150 mm on request on request on request on request 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm 40 mm Accessories Glue flange with counter flange, Ø 348 mm (also for compound seal) Art. # 48 410 348 23 Pressure sealing flange, Ø 273 mm, Art. # 48 402 30 Extension section 136 150 in PP, with lip seal without lateral inlet Ø 50 Art. # 48 987 with lateral inlet Ø 50 Art. # 48 989 158 50 106 Drain bodies 69 54 1.0 l/sec flow rate Sealing water height 30 mm 150 227 50 69 54 150 269 Ø 75 1.0 l/sec flow rate Sealing water height 30 mm 1.2 l/sec flow rate Sealing water height 50 mm 69 Ø 40 150 Ø 50 50 40 150 98 205 The Ultraflat in ABS Lateral outlet Ø 50/75, with removable odour trap Lateral outlet Ø 50 Art. # 45 700 Lateral outlet Ø 75 Art. # 45 770 The Ultraflat in ABS 112 Catalogue 2.3 Lateral outlet Ø 50, with removable odour trap with lateral inlet Ø 40, lateral outlet Ø 50 Art. # 45 701 The Vertical in ABS Vertical outlet Ø 50/40 with removable odour trap fits all upper sections System Art. # 45 254

60 mm L: 750 / 850 / 950 / 1150 mm 140 mm Other crystal colours see page 102 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm 45 mm 45 mm Shower channel upper section Linearis Super60 Crystal in ABS, with tileable access cover With 3 inlaid colorful crystal settings with maintenance free LED induction technology, 15 m power cable Handles loads up to 100 kg Shower channel upper section Linearis Super60 Wengé in ABS, with tileable access cover Handles loads up to 100 kg KESSELmodular design Combinations for any installation requirement Length 750 mm 850 mm 950 mm 1150 mm 750 mm 850 mm 950 mm 1150 mm Article # 48 908 ISL 48 909 ISL 48 910 ISL 48 912 ISL 48 908 IW 48 909 IW 48 910 IW 48 912 IW 60 mm L: 750 / 850 / 950 / 1150 mm 140 mm With installation supports 45 mm Shower channel upper section Linearis Super60 Burlwood 750 mm in ABS, with tileable access cover 850 mm Handles loads up to 100 kg 950 mm 1150 mm 48 908 IH 48 909 IH 48 910 IH 48 912 IH Shower channel upper section Linearis in ABS, with tileable access cover Cover and rim Class K 3 Length 750 mm 850 mm 950 mm 1150 mm Article # 46 908 46 909 46 910 46 912 Multistop as an odour, foam, rodent and insect stop Art. # 48 500 All drain bodies: 1.8 l/sec flow rate Sealing water height 50 mm Ecoguss with removable odour trap Ø 58 78 83 B 245 134 134 148 39 Hair filter Lateral outlet H Article # 120 48 358 109 48 378 108 48 383 92 48 311 14 made of polymer Art. # 48 700 76 42 FireKit Fire protection insert Ø 76 mm, Only for Ecoguss / Practicus drains with vertical outlet and odour trap Art. # 48 100 132 Vertical outlet H Article # 100 48 458 48 478 48 483 48 411 B H Certification no. Z19.171719 135 Practicus in PP with removable odour trap Ø 50 75 Catalogue 2.3 H 91 166 QuickFit the passage seal for core drilling for drain body vertical outlet with fire protection Art. # 48 990 without fire protection Art. # 48 991 B 245 134 148 Lateral outlet H Article # 120 45 150 109 45 170 92 45 Certification no. Z19.171719 Vertical outlet H Article # 100 45 250 45 270 45 210 113

105 150 mm 80 mm 112 160 mm 90 mm Linearis System 100 Channel Illustration Article description Article # length 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm Ø 50 Shower channel Linearis in ABS, cover and rim consisting of: shower channel upper section in ABS, with perimeter flange for waterproof barrier connection; with tileable access cover and locking system with bathroom drain body Classic in ABS, Ø 50, lateral outlet, Class K 3 40 mm 750 mm 850 mm 950 mm 1150 mm 40 150.83 40 150.84 40 150.85 40 150.87 With installation supports 24 l/min flow rate with 10 mm threshold 40 mm Shower channel Linearis in ABS, cover and rim consisting of: shower channel upper section in ABS, with perimeter flange for waterproof barrier connection; with tileable access cover and locking system with bathroom drain body The Superflat in PP, soundabsorbing, Ø 50, flexible lateral outlet, 1 inlet Ø 40, Class K 3 750 mm 850 mm 950 mm 1150 mm 42 701.83 42 701.84 42 701.85 42 701.87 L: 750 / 850 / 950 / 1150 mm 140 mm 40 mm Ø 50 With installation supports Access opening can be tiled. 24 l/min flow rate with 10 mm threshold 114 Catalogue 2.3

Shower channel Linearis Line Draining System 100 Shower channel upper section Linearis KESSELmodular design Combinations for any installation requirement 40 mm L: 750 / 850 / 950 / 1150 mm 140 mm 40 mm Shower channel upper section Linearis in ABS, with tileable access cover Cover and rim Class K 3 Length 750 mm 850 mm 950 mm 1150 mm Article # 27 808 27 809 27 810 27 812 Accessories 332 39 Glue flange with counter flange (also for compound seal) Art. # 43 401 Elastomer waterproof membrane in PVC Art. # 43 710 in EPDM Art. # 43 730 Extension section in PP, with pressure sealing flange, flange width 63 mm Art. # 27 198 500 mm Extension section in ABS, with glue flange and counter flange Art. # 27 199 The waterproof membrane in PVC and EPDM are not suitable for connections to asphalt sheeting. With glue flange and waterproof membrane premounted in PVC 1200 x 1200 mm Art. # 43 401.91 1800 x 2000 mm Art. # 43 401.93 Waterproof membrane in PVC without punchedout hole 1800 x 2000 mm Art. # 43 711 Glue Art. # 43 719 37 14 Extension section in ABS, with lip seal Art. # 27 146 Multistop as an odour, foam, rodent and insect stop Art. # 43 500 Hair filter made of polymer, Ø 108 mm Art. # 43 700 Transition section with sealing ring Ø 50 Ø 50/75 Art. # 27 126 Ø 50/40 Art. # 27 118 Drain bodies *) according to EN 3 20 mm threshold Bathroom drain Classic in ABS Ø 50 75 0.8 l/sec flow rate *) Sealing water height 50 mm with removable odour trap Lateral outlet Art. # 40 150 Art. # 40 170 90 Vertical outlet Art. # 40 250 Art. # 40 270 Ø156 Ø129 184 Ø 65 Ø 50 75 135 Ø156 Ø129 Ø without removable odour trap Lateral outlet Art. # 40 151 Art. # 40 171 Vertical outlet Art. # 40 251 Art. # 40 271 32 32 80 130 50 44 69 Bathroom drain The Superflat in PP Lateral outlet Ø 50, with removable odour trap Without lateral inlet Art. # 42 700 80 40 One lateral inlet Ø 40 Art. # 42 701 118 130 50 44 69 0.8 l/sec flow rate *) Sealing water height 30 mm 80 40 Three lateral inlets Ø 40 Art. # 42 703 118 130 50 44 69 Catalogue 2.3 115

116 Catalogue 2.3

with/without backwater protection Ideal for waterproof concrete Catalogue 2.3 117

Professional advantages KESSEL: The functional Basement drain The Universal Basement drain Drehfix Variable upper section With twin flap backwater valve Flexible options for installation in watertight cellars Ideal for renovation! Low installation height only 30 mm coverage Installation in waterproof basements Safe sealing against pressing water with special gasket set. Alternative seal with shallow bed upper section Art. # 48 968. Handlockable emergency closure Ideal for waterproof concrete With twin flap backwater valve and odour trap Handlockable emergency closure (Visual control without removing the cover). Toolfree maintenance: Fast and simple cleaning with onehand quickrelease fastener. 1. Variable upper section for stepless installation in concrete slabs: rotatable tiltable height adjustable 2. Stepless installation with extension section Art. # 38 670. Toolfree maintenance. Fast and simple cleaning with onehand quickrelease fastener. Three lateral inlets Three lateral inlets ( 2 x Ø 50 and 1 x Ø 75) are attached as standard. Inlets that are not needed are closed with special socket plugs. Height adjustable upper section Products see page 120 Products see page 121 118 Catalogue 2.3

and technical allrounder Compact basement drains with volatile liquid trap Variable upper section For various requirements The practical and economical alternative with or without twin flap backwater valve Variable upper section Secure against leaking heating oil The odour trap also acts as sludge trap. It can be simply removed via the handle for easy cleaning. Pressureproof and sturdy cellar drain Deeper installation with extension section to compensate the level (Installation height extension by 80 mm). Variable upper section Frostproof material The ideal solution as a basement stairwell drain Installation in waterproof basements Safe sealing against pressing water with special gasket set. Variable upper section for stepless installation in concrete slabs: rotatable tiltable height adjustable Sealed against ground moisture With extension section and counterflange Art. # 27 298. Ideal for waterproof concrete Variable upper section for stepless installation in concrete slabs: rotatable tiltable height adjustable Extensive accessories program For subsequent retrofitting and deeper installation, e.g. Multistop Alternative seal With shallow bed upper section Art. # 48 968. Twin flap backwater valve can also be retrofitted. Fast and simple cleaning with onehand quickrelease fastener. Products see page 122 Products see page 123 Catalogue 2.3 119

Basement drain The Universal made of polymer Ø with/without twin flap backwater valve and odour trap For interior installation according to EN 3 Illustration and dimensioned drawing D 186 67 Ideal for new buildings! 70 60 230 200 380 Variable upper section 3080 73 Art. # 27 621 Installation area 400 x 320 mm * Ø = Outer Diameter Accessories Article description Basement drain The Universal with/without twin flap backwater valve and odour trap in PP, Ø Lateral outlet 2.5, 1.8 l/sec flow rate With 2 inlets Ø 50, 1 inlet Ø 75. With/without removable twin flap backwater valve and emergency closure which can be locked by hand. Odour trap height 60 mm, with removable sludge trap. With telescopically height adjustable upper section made of polymer 1 slotted cover 200 x 200 mm made of polymer, black. Installation depth (D) 216 276 mm 2 slotted cover 200 x 200 mm and rim, screwed. Installation depth (D) 216 266 mm Class L 15 (able to withstand loads up to max. 1.5 to). EN 3 LGA Typetested and monitored guaranteed with tested quality According to EN 13564 Type 5 With twin flap backwater valve: 1 2 Ø 27 611 Ø 27 621 Without twin flap backwater valve: 1 2 Ø* Ideal waterproof concrete for Article # Ø 29 111 Ø 29 121 150 320 198 12 25 Variofix shallow bed upper section in ABS with slotted cover and rim 200 x 200 mm, screwed, Class L 15 48968 200 198 258 200 44 Upper section with support rim in Ecoguss with round slotted cover in Ecoguss Ø 235 mm with Lock & Lift System, Class B (able to withstand loads up to max. 12.5 to) 67985 Sealed with respect to floor moisture 150 320 202 200 30 For installation in waterproof concrete 30 365 204 166 Extension section in ABS with pressure sealing flange and counter flange H = 150 mm Extension section in Ecoguss with pressure sealing flange and counter flange H = 166 mm + Elastomer waterproof membrane in NBR Ideal waterproof concrete for 27298 48958 48982 175 200 Extension section in ABS H = 175 mm, with lip seal 120 Catalogue 2.3 46 Rodent protection 48988 27609

Basement drain Drehfix made of polymer Ø with/without twin flap backwater valve and odour trap For interior installation according to EN 3 Illustration and dimensioned drawing Article description Ø* Article # Ideal for renovation! min. 25 max. 55 D 185 285 168 x 210 190 30 Art. # 27 301 Installation area 320 x 190 mm Accessories 210 x 167 200 x 159 14 Basement drain Drehfix with/without twin flap backwater valve and odour trap in ABS, Ø lateral outlet 2.5, 1.8 l/sec flow rate With/without removable twin flap backwater valve and emergency closure which can be locked by hand. With odour trap. With removable sludge trap and integrated, height adjustable upper section. with slotted cover 150 x 190 mm made of polymer, black, with Easy Entry Function. Class K 3 (able to withstand loads up to max. 300 kg). Installation depth (D) 210 240 mm. According to EN 13564 Type 5. EN 3 LGA Typetested and monitored guaranteed with tested quality Extension section made of polymer black H = 183 mm With twin flap backwater valve: Ø 27 301 Without twin flap backwater valve: Ø 33 101 38 670 183 189 x 148 Art. # 39 005 50 75 67 71 90 Inlet sections made of polymer incl. flat seal Ø 50 Ø 75 Ø 39005 39007 39100 Hole saw for drilling lateral surfaces for inlets and outlets Ø 50, 75, (Saw blade holder Ø = 145 mm) Rodent protection 50 101 27609 * Ø = Outer Diameter 75 131 Transition section Ø / 75 for article numbers: 27 611, 27 621, 27 301, 29 111, 29 121, 33 101, 36 501 Ø 75 / Ø 27 602 Catalogue 2.3 121

made of polymer Ø 75 / Ø with/without odour trap For interior installation according to EN 3 Illustration and dimensioned drawing Art. # 36 501 Art. # 45.40 Installation area 220 x 280 mm Accessories * Ø = Outer Diameter Accessories 132 150 148 min. 20 max. 76 92 Installation area 220 x 180 mm Article description Basement drain in PP, Ø Lateral outlet 2.5, 1.6 l/sec flow rate With removable odour trap and sludge trap. With upper section in PP with slotted cover 150 x 150 mm made of polymer, black. Class K 3 (able to withstand loads up to max. 300 kg). EN 3 Extension section made of polymer Can be extended by 80 mm Odour trap insert with integrated sludge trap Ø* Article # Ø 36 501 36 590 60 103 Basement drain in PP, Ø..., lateral outlet 2.5 /vertical 1.8 l/sec flow rate Lateral outlet With odour trap: Ø 45.40 With/without removable odour trap. Without odour trap: With lip seal and protective cover for use during construction. Ø 34 101 With upper section in ABS Vertical outlet with slotted cover 138 x 138 mm in ABS, black. With odour trap: Class K 3 (able to withstand loads up to max. 300 kg). Ø 45 210.40 Installation dimensions of vertical drain body see page 80 Without odour trap: EN 3 LGA Typetested and monitored guaranteed with tested quality LGA Typetested and monitored guaranteed with tested quality Multistop as an odour, foam, rodent and insect stop Hair filter made of polymer Ø 34 102 48 500 48 700 348 23 30 Glue flange with counter flange for Art. # 34 101, 34 102, 45 210.40, 45.40 Pressure sealing flange + Elastomer waterproof membrane in NBR Ideal waterproof concrete for 48 410 48402 48981 136 150 35 Extension section in ABS with lip seal without lateral inlet 48 987 50 Bellshaped odour trap insert 50 mm seal water height Sludge trap 27 169 48 168 122 Catalogue 2.3

Volatile liquid traps made of polymer Ø with/without twin flap backwater valve For interior installation according to EN 33 and 5 / EN 13564 Type 5 Illustration and dimensioned drawing with twin flap backwater valve min. 30 max. 90 D 186 243 230 200 320 76 Installation area 400 x 250 mm Variable upper section without twin flap backwater valve D min. 30 max. 90 186 Installation area 400 x 250 mm * Ø = Outer Diameter 243 230 200 320 76 Variable upper section Article description Volatile liquid trap made of polymer, Ø 1.0 l/sec flow rate With twin flap backwater valve according to EN 13564 Type 5. With integrated odour trap and sludge trap. with slotted cover made of polymer, black. Installation depth (D) 216 276 mm Class K 3 (able to withstand loads up to max. 300 kg). According to EN 13564 Type 5 EN 33 and 5 Volatile liquid trap made of polymer, Ø 1.0 l/sec flow rate With integrated odour trap and sludge trap. with slotted cover made of polymer, black. Installation depth (D) 216 276 mm Class K 3 (able to withstand loads up to max. 300 kg). EN 33 and 5 LGA Typetested and monitored guaranteed with tested quality Ø* Article # Ø 52 101 Ø 51 101 KESSELProfessional advantages Easy installation with adjustable upper section (vertically and laterally adjustable) Sealing gasket between extension section and flange Article # 27 298 (prevents floor moisture damage) Waterproofing seal Article # 48 968 Ideal for waterproof concrete Cast iron cover handles higher loads up to 12.5 tons (load class B) Article # 48 985 Upgradable to twin flap backwater valve Quick and easy cleaning with onehand locking clasp Catalogue 2.3 123

Backwater pumping station Pumpfix S Basement drain Ø with twin flap backwater valve and pump For interior installation according to EN 3 Illustration and dimensioned drawing D Ideal for new buildings! 27 202 454 330 400 150 Variable upper section 190 272 452 Article description Backwater pumping station Pumpfix S with twin flap backwater valve and pump For wastewater without sewage made of polymer, Ø Lateral outlet 2.5, 1.6 l/sec flow rate For installation in a concrete slab/floor for installation depth (D) from 481 656 mm With removable pump, twin flap backwater valve and odour trap. Twin flaps, selfclosing, one of which can be locked by hand, self activating pump during backwater. With telescopic upper section for free height and level adjustments recessed cover for onsite tiling, Class A 15, made of polymer. With moisture protective sealing flange. Not for use as a lifting station. Pumping height m [m] 8,0 7 6 5 4 3 2 1 7,0 6,0 5,0 4,0 3,0 2,0 1,0 Ø* Article # Ø 28 451 Installation area 700 x 700 mm * Ø = Outer Diameter According to EN 13564 Type 5 EN 3 LGA Typetested and monitored guaranteed with tested quality 0,0 1 2 3 4 5 6 7 [Qm 3 /h] Pumping capacity Q (m 3 /h) 0,0 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 124 Catalogue 2.3 Ideal for waterproof concrete KESSELProfessional advantages Ideal for waterproof concrete Vertically adjustable upper section for stepless installation in concrete slabs: Rotatable, tiltable, vertically adjustable Installation in waterproof concrete. Gasket set to prevent groundwater infiltration. Elegant optical appearance due to recessed cover for onsite tiling Perfect for drainage of outdoor basement access steps with additional inlet connections Wastewater discharging even during backwater

Drains and drainage channels Catalogue 2.3

Professional advantages Quality drains Point drains System / 200 Ferrofix With all seal types With connection flange With pressure sealing flange With twin sealing flanges Easy installation variable upper section: rotatable, tiltable, height adjustable Easy maintenance thanks to removable odour trap. Fire kits FireKit 100 and FireKit 200 simple retrofitting! Only use in vertical stainless steel drains which already have an odour trap. Design covers made of solid stainless steel and recessed covers for onsite tiling for a modern bathroom design Our design covers received the red dot award for high design quality in the Product Design category 2010. Bellshaped odour trap insert in PP removable, sealing water height 70 mm, standard in the body FireKit 200 Fire protection insert can only be retrofitted for vertical drains Art. # 48 200 Components System Page 129 131 Design the drain you need: Upper section 1.4301... Load class M With a stainless steel cover 290 mm, Art. # 57 425 Drain body floor drain Ferrofix 1.4301 Vertical outlet Ø Standard with removable plastic odour trap. Art. # 55 400 Components System 200 Page 133 134 Products System see from page 128 Products System 200 see from page 132 126 Catalogue 2.3

for food commercial applications Point and Line Draining Ferrofix System / 200 Drainage channels Ferrofix Express System on stock With adhesive edge for shallow bed seals Linear Drainage channels Express made from Ferrofix Complete drainage channel with adhesive edge, sludge trap optional Square drainage channels Express made from Ferrofix Complete drainage channel with adhesive edge, sludge trap optional Channel widths: 158 and 300 mm Channel length: 1042, 1550, 2058 mm and 1047, 1550, 2063 mm Including stainless steel cover, nonslip, Class L 15 Channel width: 500 mm Channel length: 500 and 953 mm Including stainless steel cover, nonslip, Class L 15 Cover (498 mm), can also be placed in the dishwasher Products System see page 138 Design your own drainage channel Drainage channel Ferrofix Individual channel lengths and widths on request. Large selection of covers Class K, L and M Welded version Permanently tight even if subject to continuous expansion loads caused by temperature fluctuation. Products System 100//200 see from page 139 Customised channel lengths on request. Large selection of covers Class K, L and M for gully upper section. Easy cleaning: After removing the mud trap (optional), all inner walls and sloped surfaces need to be cleaned with the steam jet. Catalogue 2.3 Slotted channel Ferrofix 127

Floor drains Ferrofix 1.4301 For interior installation according to EN 3 System Illustration and dimensioned drawing Article description Ø* Article # Illustration shows 1 with connection flange 89 149 204 min. 35 max. 75 Floor drain Ferrofix Vertical outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section in ABS 1 with slotted cover 138 x 138 mm and rim, screwed, nonslip, Class L 15 2 with slotted cover 138 x 138 mm and rim, screwed, Class L 15 With upper section 3 with slotted cover 138 x 138 mm and rim, screwed, Class K 3 1 2 3 Ø 78 Ø Ø 78 Ø Ø 78 Ø 54 410.61 54 430.61 54 410.41 54 430.41 54 410.31 54 430.31 Installation area 180 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with connection flange 78: 145 : 165 92 146 78: : min. 35 max. 75 78: 106 : Floor drain Ferrofix Lateral outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section with slotted cover 138 x 138 mm, screwed, Class K 3 Ø 78 Ø 54 400.31 54 420.31 Installation area 220 x 180 mm EN 3 LGA Typetested and monitored guaranteed with tested quality Illustration shows 1 with pressure sealing flange Installation area 180 x 180 mm with pressure sealing flange 78: 142 : 162 89 86 273 149 Installation area 220 x 180 mm * Ø = Outer Diameter SML pipe connection dimension acc. to DIN 19522 273 146 201 78: : min. 35 max. 75 min. 35 max. 75 78: 103 : 107 Floor drain Ferrofix Vertical outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section in ABS 1 with slotted cover 138 x 138 mm and rim, screwed, nonslip, Class L 15 With upper section 2 with slotted cover 138 x 138 mm and rim, screwed, Class K 3 EN 3 LGA Typetested and monitored guaranteed with tested quality Floor drain Ferrofix Lateral outlet, 1.8 l/sec flow rate With removable odour trap, Sealing water height 50 mm. With upper section with slotted cover 138 x 138 mm, screwed, Class K 3 EN 3 LGA Typetested and monitored guaranteed with tested quality 1 2 Ø 78 Ø Ø 78 Ø Ø 78 Ø 54 210.61 54 230.61 54 210.31 54 230.31 54 200.31 54 220.31 128 Catalogue 2.3

Accessories / Components Floor drains Ferrofix 1.4301 System Illustration and dimensioned drawing Article description Ø* Article # 40 78: 145 : 165 204 78: 142 : 162 201 142 132 78: : 142 132 273 132 78: : 273 132 312 138 78: 106 : 78: 103 : 107 10 18 120 Drain bodies Ferrofix in stailess steel 1.4301 with removable odour trap Lateral outlet Vertical outlet in combination with FireKit 48 100 Drains with lateral inlet available upon request Drain bodies Ferrofix in stailess steel 1.4301 with pressure sealing flange, with removable odour trap Lateral outlet Vertical outlet in combination with FireKit 48 100 Drains with lateral inlet available upon request Variofix shallow bed upper section in ABS with slotted cover 138 x 138 mm and rim, screwed, Class L 15 fits all drain bodies System Ø 78 Ø Ø 78 Ø Ø 78 Ø Ø 78 Ø 54 400 54 420 54 410 54 430 54 200 54 220 54 210 54 230 48 963 40 40 312 132 312 132 10 23 10 23 120 120 Variofix shallow bed upper section in ABS with design cover Kessel 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System Variofix shallow bed upper section in ABS with design cover Oval 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System 48 904 48 905 40 40 312 132 312 138 10 18 10 21 120 120 Variofix shallow bed upper section in ABS with recessed polymer cover for onsite tiling x mm, and rim, with locking system, Class K 3 fits all drain bodies System Variofix shallow bed upper section in ABS with slotted cover 138 x 138 mm and rim, nonslip, screwed, Class L 15 fits all drain bodies System 48 906 48 907 40 * Ø = Outer Diameter 312 138 23 40 120 Variofix shallow bed upper section in ABS with antislip drain cover 138 x 138 mm and rim in stainless steel, nonslip, Class L 15 fits all drain bodies System 48 965 Catalogue 2.3 129

Accessories / Components Floor drains Ferrofix 1.4301 System Illustration and dimensioned drawing Article description Ø* Article # Upper section 1.4301 with antislip drain cover 138 x 138 mm, Class L 15 / M fits all drain bodies System 48 177 16 132 90 Upper section 1.4301 with slotted cover 138 x 138 mm, screwed, Class K 3 fits all drain bodies System Upper section in ABS with design cover Oval 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System 48 977 48 202 16 25 132 130 90 100 Upper section in ABS with design cover Kessel 120 x 120 mm and rim in stainless steel, with Lock & Lift System, Class L 15 fits all drain bodies System Upper section in ABS with recessed polymer cover for onsite tiling x mm and rim made of polymer, with locking system, Class K 3 fits all drain bodies System 48 201 48 210 25 132 100 Upper section in ABS with recessed polymer cover for onsite tiling x mm and rim, with locking system, Class K 3 fits all drain bodies System 48 211 18 138 93 Upper section in ABS with slotted cover 138 x 138 mm and rim, nonslip, screwed, Class L 15 fits all drain bodies System 48 176 18 138 93 Upper section in ABS with slotted cover 138 x 138 mm and rim, screwed, Class L 15 fits all drain bodies System Upper section in ABS with slotted cover 138 x 138 mm, screwed, Class K 3 fits all drain bodies System 48 951 48 950 * Ø = Outer Diameter Upper section in ABS with slotted cover 120 x 120 mm, Class K 3 fits all drain bodies System 48 165 130 Catalogue 2.3

Accessories / Components Floor drains Ferrofix 1.4301 System Illustration and dimensioned drawing Article description Ø* Article # 150 35 Extension section in PP, with lip seal 48 987 136 39 120 Multistop odour, foam, rodent and insect stop 48 500 Sludge trap 48 937 112 273 Extension section 1.4301, with pressure sealing flange, Flange width 70 mm, Ø 273 mm 54 187 1 2 46 273 114 50 160 Extension section 1.4301, with pressure sealing flange, Side inlet with plugin sleeve Ø 50/40. Flange width 70 mm, Ø 273 mm Odour trap 1 1.4301 sealing water height 50 mm 2 made of polymer sealing water height 50 mm 54 189 54 188 27 169 1 Certification no. Z19.171719 2 76 42 FireKit Fire protection insert Can only be retrofitted for vertical drains Only use in combination with an odour trap QuickFit the passage seal for core drilling for drain body vertical outlet 1 with fire protection 48 100 48 990 1 166 166 Certification no. Z19.171719 2 without fire protection 48 991 * Ø = Outer Diameter Sludge trap fits all drain bodies Ferrofix System 48 168 Catalogue 2.3 131

Floor drains Ferrofix 1.4301 For interior installation according to EN 3 System 200 Illustration and dimensioned drawing Article description Ø* Article # Illustration shows 1 with connection flange 231 280 200 min. 35 max. 80 Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate With removable odour trap With upper section 1 with antislip drain cover 190 x 190 mm, Class L / M 2 with slotted cover 190 x 190 mm, Class M 3 with roundslot cover plate 190 x 190 mm, nonslip, Class M 1 2 3 Ø Ø Ø 55 400.20 55 400.30 55 400.40 Installation area 300 x 300 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with connection flange 320 200 231 min. 12 max. 25 min. 30 max. Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate with shallow bed gasket With removable odour trap With shallow bed upper section made of polymer with slotted cover 200 x 200 mm and rim, screwed, nonslip, Class L 15 Ø 55 400.52 Installation area 300 x 300 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with pressure sealing flange 231 420 200 min. 50 max. 80 Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate With removable odour trap With upper section 1 with antislip drain cover 190 x 190 mm, nonslip, Class L / M 2 with slotted cover 190 x 190 mm, Class M 1 2 Ø Ø 55 600.20 55 600.30 Illustration shows 1 Installation area 450 x 450 mm with pressure sealing flange 231 320 200 Installation area 450 x 450 mm * Ø = Outer Diameter min. 12 max. 25 min. 30 max. EN 3 LGA Typetested and monitored guaranteed with tested quality Floor drain Ferrofix Vertical outlet, 2.0 l/sec flow rate With removable odour trap With shallow bed upper section made of polymer with slotted cover 200 x 200 mm and rim, screwed, nonslip, Class L 15 EN 3 LGA Typetested and monitored guaranteed with tested quality Ø 55 600.52 132 Catalogue 2.3

Accessories / Components Floor drains Ferrofix 1.4301 System 200 Illustration and dimensioned drawing Article description Ø* Article # Drain bodies Ferrofix in stailess steel 1.4301 with connection flange, with removable odour trap Lateral outlet Vertical outlet in combination with FireKit 48 200 Drain bodies Ferrofix in stailess steel 1.4301 mit pressure sealing flange, with removable odour trap Lateral outlet Vertical outlet in combination with FireKit 48 200 Ø Ø Ø Ø 55 350 55 400 55 550 55 600 225 225 280 220 420 220 196 196 115 115 Drain body Ferrofix in stailess steel 1.4301 with connection flange, with removable odour trap Lateral outlet With low drain height Drain body Ferrofix in stailess steel 1.4301 mit pressure sealing flange, with removable odour trap Lateral outlet With low drain height Ø Ø 142 026 142 025 150 320 198 200 von 12 bis 25 Variofix shallow bed upper section in ABS with slotted cover 200 x 200 mm and rim, nonslip, screwed, Class L 15 fits all drain bodies System 200 48 978 Variofix shallow bed upper section in ABS with antislip drain cover 190 x 190 mm, nonslip, Class L 15 fits all drain bodies System 200 48 969 105 25 200 180 200 Upper section 1.4301 with antislip drain cover 190 x 190 mm, nonslip, Class M fits all drain bodies System 200 Upper section 1.4301 with slotted cover 190 x 190 mm, Class M fits all drain bodies System 200 57 410 57 420 * Ø = Outer Diameter 105 25 200 180 200 Upper section 1.4301 with roundslot cover plate 190 x 190 mm, nonslip, Class M fits all drain bodies System 200 57 430 Catalogue 2.3 133

82 Accessories / Components Floor drains Ferrofix 1.4301 System 200 Illustration and dimensioned drawing Article description Ø* Article # 25 300 180 200 Upper section 1.4301 with antislip drain cover 290 x 290 mm, nonslip, Class M fits all drain bodies System 200 57 415 25 25 300 180 200 300 180 200 Upper section 1.4301 with slotted cover 290 x 290 mm, Class M fits all drain bodies System 200 Upper section 1.4301 with roundslot cover plate 290 x 290 mm, nonslip, Class M fits all drain bodies System 200 57 425 57 435 175 Ø200 46 Extension section in PP, with lip seal Extension section 1.4301 with pressure sealing flange with connection flange 48 988 27 185 27 186 Odour trap 1.4301, removable, sealing water height 70 mm Bellshaped odour trap insert in PP, removable, sealing water height 100 mm 27 182 27 171 Certification no. Z19.171719 92 FireKit 200 Fire protection insert Can only be retrofitted for vertical drains Only use in combination with an odour trap Sludge trap 1.4301 Height 60 mm Height 150 mm 48 200 67 302 67 301 * Ø = Outer Diameter Sludge trap in PEHD 67 300 134 Catalogue 2.3

Components Floor drains Ferrofix 1.4301 System Illustration and dimensioned drawing Article description Ø* Article # Bellshaped odour trap insert in PP sealing water height 50 mm 27 169 120 Lip seal Use for rising damp (backwater) 049012 Components Floor drains Ferrofix 1.4301 System 200 Illustration and dimensioned drawing Article description Ø* Article # 70 136 50 127 Bellshaped odour trap insert in PP removable, sealing water height 70 mm 27 170 Holding ring Use for specified drainage of seepage water 27 134 Lip seal Use for rising damp (backwater) 27 140 * Ø = Outer Diameter Catalogue 2.3 135

Individual solutions Drains Ferrofix 1.4301 Customised solutions for low profile floor surface applications (15 mm)* Ferrofix stainless steel drains When planning renovations, specialists often face the problem of using products in very shallow floor structures that still meet the sealing requirements. As a customer, describe your installation situation and we will make a Ferrofix that is precisely tailored to your requirements. Just ask us! A wide range of customised solutions are possible using the KESSEL Ferrofix stainless steel drains: Floor structures up to a minimum height of 15 mm are possible, even with an adhesive edge for the compound seal Materials in various variants can be selected Choice of cover forms and sizes Example: Tiled floor 15 mm *) If the flange is stuck 3 mm into the concrete, a structural height of 15 mm is possible, provided that the socket of the PVC pipe is at least 3 mm below the upper edge of the concrete. Moisture seal Concrete floor slab 250 mm 136 Catalogue 2.3

Individual solutions Upper sections Ferrofix 1.4301 Illustration Article description Cover mm Connection Ø Article # Upper section in ABS, with a closed cover made of stainless steel, screwed, without gasket Class K 3 150 x 150 27 191G Upper section in ABS, with rim and a closed cover made of stainless steel, screwed, without gasket Class L 15 150 x 150 150 x 150 27 196G 48 951G Upper section, with a closed cover made of stainless steel, screwed, without gasket Class K 3 Upper section, with a closed cover made of stainless steel, screwed odourtight, with a backwaterproof seal up to 0.5 bar, Class L 15 150 x 150 150 x 150 150 x 150 150 x 150 200 x 200 200 27 195PL 48 977PL 27 177PL 48 177PL 57 410PL Illustration Article description Cover mm Connection Ø Article # Upper section with glue flange and a closed cover made of stainless steel, screwed, without gasket Class K 3 150 x 150 150 x 150 27 195PLKF 48 977PLKF Upper section with glue flange and a closed cover made of stainless steel, screwed odourtight, with a backwaterproof seal up to 0.5 bar, Class L 15 150 x 150 150 x 150 27 177PLKF 48 177PLKF Upper section with glue flange and stainless steel cover, Class L 15 / M 150 x 150 150 x 150 200 x 200 300 x 300 200 200 27 177KF 48 177KF 57 410KF 57 415KF Catalogue 2.3 137

Drainage channels Ferrofix Express System Illustration and dimensioned drawing Linear stainless steel channel drains System L W Article description Drainage channels Ferrofix made of stainless steel Material thickness 2.0 mm acidtreated in a pickling bath, visible cover sanded, with longitudinal and transverse slopes, feet for height adjustment, with welded distance grates to secure the covers, including drain pipes. Channel profile for shallow bed seals, with adhesive edge 15 mm deep and 30 mm turned down allround to the outside, with welded mitre joints. Material 1.4301 (V2A) Channel profile Adhesive edge for shallow bed seals With stainless steel cover Nonslip R11, acidtreated in a pickling bath. Mesh width: 23 x 23 mm Load class: L 15 (1.5 ton.) H Sludge trap optional: System Art. # 6 SKH Construction height 90 mm Art. # 6 SKN Construction height 30 mm Square/rectangular stainless steel channel drains System On stock: Dimensions W x L x H Article # Linear stainless steel channel drains System L H 158 x 1042 x 55 mm 158 x 1550 x 58 mm 158 x 2058 x 60 mm 300 x 1047 x 60 mm 300 x 1555 x 63 mm 300 x 2063 x 65 mm 60 15 100 60 15 150 60 15 200 60 30 100 60 30 150 60 30 200 Square/rectangular stainless steel channel drains System W 500 x 500 x 65 mm 500 x 953 x 70 mm 60 50 050 60 50 100 Accessories Drain bodies with removable odour trap Ecoguss see page 126 Practicus see page 127 Ferrofix see page 167 FireKit Fire protection insert Ø 76 mm, only for drains with vertical outlet and odour trap Art. # 48 100 138 Catalogue 2.3 76 42 Matching drain body System optionally as an accessory Certification no. Z19.171719 Certification no. Z19.171719 QuickFit the passage seal for core drilling for drain body vertical outlet 1 with fire protection Art. # 48 990 2 without fire protection Art. # 48 991 1 166 166 2

Box channel / floor sump tray Ferrofix Illustration and dimensioned drawing LA2 h Uprofile LA Profile adhesive edge Profile tile connector Article description Box channel Ferrofix made of stainless steel Material thickness 2.0 mm acidtreated in a pickling bath, visible cover sanded, with longitudinal and transverse slopes, feet for height adjustment, with welded distance grates to secure the covers Including drain pipes Channel widths from 150, 200, 250 etc. to 1000 mm Channel lengths from 400 mm Channel shapes straight Lshaped Ushaped Tshaped Grating(s) Mitre joint(s) Channel profiles Uprofile Adhesive edge for shallow bed seals (compound seals) Tile connector to protect the tiles from breaking at the edge (all profiles also available with hollowfree filling of the visible covers) Drain pipes System 100 (DA mm) System (DA mm) System 200 (DA 200 mm) (depends on channel width) Material 1.4301 (V2A) (Material 1.4404 or 1.4571 V4A on request) Matching drain body and accessories System see from page 129 System 200 see from page 133 Sludge trap optional: System 100 Art. # 6100 SKH construction height 90 mm System Art. # 6 SKH construction height 90 mm System 200 Art. # 6200 SKN construction height 55 mm All sludge traps also available in special sizes Covers Cover Rod cover Nonslip R 11, acidtreated in pickling bath Mesh width 23 x 23 mm or 30 x 30 mm Class L 15 or M Not antislip, acidtreated in pickling bath Rod clearance 18 mm, supporting member 25 x 8 mm, class M Slab cover Not antislip, glass beadblasted Allround 8 mm inlet Material thickness 10 mm, class M Bathroom cover Suitable for barefoot area Brushed surface, perforation 8 x 8 mm Insertion depth 25 mm, thickness 2 mm Class K 3 Ribbed plate cover Bathroom cover made of polymer Nonslip R 11, acidtreated in pickling bath Allround 8 mm inlet Material thickness 10 mm, class M Suitable for barefoot area, With rounded or flat upper profile Colours white, grey, beige or yellow (other RAL colours on request) Insertion depth 25 mm, class K 3 Catalogue 2.3 139

Slotted channel Ferrofix Illustration and dimensioned drawing Article description Slotted channel Ferrofix made of stainless steel Material thickness 2.0 mm acidtreated in pickling bath, visible covers sanded, with longitudinal and transverse slopes, feet for height adjustment, including gully, drain pipes. Channel widths 60 mm, 48 mm Slot widths 20 mm (standard width), 8 mm (barefoot area) Channel lengths from 600 mm Channel shapes and gully straight with gully on the edge of the channel Type 100 straight with gully in the middle Type 200 Lshaped with gully in the intersection Type 250 Tshaped with gully in the intersection Type 300 Crossshaped with gully in the intersection Type 400 Channel profiles Uprofile Adhesive edge for shallow bed seals (compound seals) Tile connector to protect the tiles from breaking at the edge (all profiles also available with hollowfree filling of the visible covers) Gully with drain pipes System 100 (DA mm) System (DA mm) System 200 (DA 200 mm) (depends on the gully width) Material 1.4301 (V2A) (Material 1.4404 or 1.4571 V4A on request) Matching drain body and accessories System see from page 129 System 200 see from page 133 Sludge trap optional: System 100 Art. # 6100 SKH construction height 90 mm System Art. # 6 SKH construction height 90 mm System 200 Art. # 6200 SKN construction height 55 mm LA2 h Uprofile LA Profile adhesive edge Tile connector profile All sludge traps also available in special sizes Covers Cover Rod cover Slab cover Nonslip R 11, acidtreated in pickling bath Mesh width 23 x 23 mm or 30 x 30 mm Class L 15 or M Not antislip, glass beadblasted Allround 8 mm inlet Material thickness 10 mm, class M Bathroom cover Not antislip, acidtreated in pickling bath Rod clearance 18 mm, supporting member 25 x 8 mm, class M Suitable for barefoot area Brushed surface, perforation 8 x 8 mm Insertion depth 25 mm, thickness 2 mm Class K 3 Ribbed plate cover Bathroom cover made of polymer Nonslip R 11, acidtreated in pickling bath Allround 8 mm inlet Material thickness 10 mm, class M 140 Catalogue 2.3 Suitable for barefoot area, With rounded or flat upper profile Colours white, grey, beige or yellow (other RAL colours on request) Insertion depth 25 mm, class K 3

Parking deck drains Balcony drains / Roof drains Gutter drains / Yard drains Street gullies Catalogue 2.3 141

Professional advantages The compact drains with the big Parking deck drains made of Ecoguss Ecoguss or polymer flatroof drains With pressure sealing flange Handles loads up to 12.5 t Single piece pipe connection drain Metallic compound material The properties of metal, yet corrosionfree and nonconductive. with / without heating System 200 in Ecoguss For small areas System 100 made of polymer Ecoguss the new hightech material Corrosion free and sound dampening material for elevated sound protection according to DIN 4109 <30dB(A) High shatter resistance and high load resistance Parking deck drains carry Class B rating (12.5 ton loads). High flow performance exceeds regulatory norm requirements Resistant to high temperatures up to 400 C (shortterm) QuickFit the allround seal for core drillings with approval Z19.171719 Minimised core drillings Ø 160 mm 2/3 costsaving Additional sound insulation and smoketight closure between core drilling and the outlet. Lowcost and fast installation Fire and smoke protection FireKit with approval Z19.171719 Optional for drain bodies with vertical outlet. Only use in combination with odour trap! High temperatureresistant materials Briefly up to 400 C, for processing with hot bitumen acc. to DIN 18195 Easy installation also upgradable after installation to emergency drainage option Full selection of accessories to meet all installation requirements Available in Ø 75, Ø and Ø Lock & Lift System no tools required With integrated heating low energy consumption Multistop 200 as an odour, foam, rodent and insect protection (Waterless odour trap) Electrical grounding no longer necessary. Products see page 144 142 Catalogue 2.3 Products see pages 146 and 147

applications for yard / roof drainage Parking deck / Balcony / Roof / Gutter and Yard drains Polymer gutter drains Ecoguss or polymer yard drains The concrete alternative! NEW! Upper section in Ecoguss NEW! Yard drain in Ecoguss Optimal pipe access with sludge trap removal Lateral Ø inlet possible with use of extension section Art. # 67 600. Convenient wall mount system available as accessory Vertically adjustable upper section for stepless installation in concrete slabs: rotatable tiltable vertically adjustable up to mm Deeper installation and lateral inlet requirement. In one step the quick and easy solution. With extension section Art. # 67 500 and extension section Art. # 67 600 with Ø lateral inlet. Frost free installation depths with Art. # 67 500 or Art. # 67 600 (with lateral inlet) available as accessory Frost free installation depth up to 1020 mm with extension section Art. # 67 500. Locking and removal key for Ecoguss drain covers with Lock & Lift System. Art. # 67 007. Full selection of accessories to meet all installation requirements. Products see page 150 Products see page 151 Catalogue 2.3 143

Ecoguss Parking deck drains according to EN 3 System 100/ Illustration and dimensioned drawing Article description Ø* Article # with pressure sealing flange 290 247 234 40 min. 57 max. 113 Ecoguss Parking deck drains in Ecoguss, Ø Vertical outlet, 4.5 l/sec flow rate for connection to SMLpipe according to DIN 19522. With sludge trap. System With stainless steel pressure sealing flange with square upper section in Ecoguss 247 mm x 247 mm with connection flange and round slotted cover Ø 234 mm, with Lock & Lift System Class B. Ø 78 Ø 48 878.01 48 811.01 107 Core drilling only Ø 160 mm with QuickFit Art. # 48 878.01 Ø H 135 Installation area 300 x 300 mm 78 H Accessories see page 82 EN 124 / EN 3 LGA Typetested and monitored guaranteed with tested quality Art. # 48 504 Pipe connection drain Ø H H1 77 79 196 Installation area Ø 300 mm 83 73 290 247 235 H H1 40 Ecoguss Parking deck drains, round in Ecoguss, Ø... Vertical outlet, 4.5 l/sec flow rate for connection to SMLpipe/plastic pipe With sludge trap. 1 System 100: SMLpipe 2 System : plastic pipe with round upper section in Ecoguss with connection flange Ø 247 and round slotted cover Ø 235 mm, with Lock & Lift System Class B. Ø Ø Pipe connection drain Ecoguss Parking deck drains, square in Ecoguss, Ø... Vertical outlet, 4.5 l/sec flow rate 1 2 Ø Ø 290 247 235 for connection to SMLpipe/plastic pipe With sludge trap. 1 2 System 100: SMLpipe System : plastic pipe 196 H1 40 EN 124 / EN 3 LGA Typetested and monitored guaranteed with tested quality 1 2 48 503 48 504 48 501 48 502 144 Art. # 48 502 * Ø = Outer Diameter Ø H H1 Installation area 300 x 300 mm 77 79 83 73 H with square upper section in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Class B. EN 124 / EN 3 Catalogue 2.3 LGA Typetested and monitored guaranteed with tested quality

Ecoguss Parking deck drains System 100/ KESSELmodular design Combinations for any installation requirement Upper section System 100 Upper section System Upper section in Ecoguss Upper section in Ecoguss with square upper section 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # 48 501 with round upper section Ø 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # 48 503 with square upper section 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # 48 502 with round upper section Ø 247 mm in Ecoguss with connection flange and round slotted cover Ø 235 mm, with Lock & Lift System Art. # 48 504 Accessories System 100 Accessories System ABS extension section with lip seal without inlet Art. # 27146 PP extension section with lip seal without lateral inlet Art. # 48 987 with lateral inlet Art. # 48 989 136 150 35 FireKit Fire protection insert* Certification no. Z19.171719 for Ecoguss drain bodies with vertical outlet Art. # 48 100 76 42 Multistop as rodent, insect, foam and odour stop Art. # 43 500 37 105 Odour trap insert, PP sealing water head 50 mm Art. # 27 169 Multistop as rodent, insect, foam and odour stop Art. # 48 500 50 39 120 Drain body System 100 Upper section in Ecoguss (System 100) can be connected to SMLpipe directly QuickFit Certification no. Z19.171719** the allround seal for core drillings for Ecoguss drain body, vertical outlet **with protection insert Art. # 48 990 without protection insert Art. # 48 991 * only in combination with Art. # 27 169 Drain body System Ecoguss drain body with pressure sealing flange high temperature resistant, without odour trap vertical outlet Ø 78 Art. # 48 879 Ø 83 Art. # 48 889 Ø Art. # 48 812 Use of drain body without flange available upon request! Insulating body Art. # 48 952 360 mm Catalogue 2.3 145 166 Art. # 48 990 120

Balcony drains/roof drains according to EN 3 System 100 Illustration and dimensioned drawing Art. # 40 251.90 Art. # 40 151.20 Art. # 40 152.71 with glue flange Variable upper section 152 141 332 107 50 min. 20 max. 60 Installation area 180 x 180 mm with connection flange Variable upper section 90 107 185 min. 10 max. 60 Installation area 220 x 180 mm with connection flange Variable upper section 90 129 184 65 Installation area 220 x 180 mm with pressure sealing flange Installation area 180 x 180 mm Article description Ø* Article # Balcony drain in ABS, Ø 50 Lateral outlet 2.5, 0.9 l/sec flow rate Frostproof outlet. With fixed lip seal. With glue flange and counter flange. With upper section in ABS with slotted cover 100 x 100 mm, Class K3 (able to withstand loads up to max. 300 kg). Balcony drain in ABS, Ø 50 Vertical outlet, 0.9 l/sec flow rate in ABS, Ø... Lateral outlet 2.5, 0.9 l/sec flow rate Frostproof outlet. With fixed lip seal With upper section in ABS with slotted cover 100 x 100 mm, Class K3 (able to withstand loads up to max. 300 kg). Lateral outlet: Ø 50 40 151.90 Vertical outlet: Ø 50 40 251.90 Lateral outlet: Ø 50 Ø 75 40 151.20 40 171.20 Balcony drain Lateral outlet: with inserted cover Ø in synthetic material, Ø 50 40 152.71 Class K3 (able to withstand loads up to max. 300 kg) Ø 75 40 172.71 in ABS, Ø... Lateral outlet 2.5, 0.9 l/sec flow rate Frostproof outlet. Roof drain in PP, Ø Vertical outlet, 4.5 l/sec flow rate With pressure sealing flange in PP. With counter flange. With leaf trap. Ø 45 950 with dual pressure sealing flange Roof drain Ø 45 970 Installation area 180 x 180 mm * Ø = Outer Diameter EN 3 EN 3 EN 3 146 Catalogue 2.3 LGA Typetested and monitored guaranteed with tested quality LGA Typetested and monitored guaranteed with tested quality LGA Typetested and monitored guaranteed with tested quality in PP, Ø Vertical outlet, 4.5 l/sec flow rate With twin sealing flanges. With pressure sealing flange in PP. With counter flange. With leaf trap.

Flatroof drains Ecoguss with single and double seal according to EN 3 / DIN 1986100 for gravity drainage System 200 Illustration and dimensioned drawing Article description Ø* Article # With sealing flange 365 Flatroof drain Ecoguss with single seal in Ecoguss, Ø For connection to polymer pipes With pressure sealing flange in Ecoguss Ø 75 Ø Ø 48 370 48 310 48 312 min. 40 max.140 H 72 99.5 H 72 99.5 Ø H Installation area Ø 370 mm 75 96,5 93 With twin sealing flanges 365 93 EN 3/DIN 1986100 LGA Typetested and monitored guaranteed with tested quality Flatroof drain Ecoguss with double seal in Ecoguss, Ø For connection to polymer pipes With pressure sealing flange in Ecoguss and upper section in Ecoguss Ø 200 with pressure sealing flange and leaf trap as double seal suitable for Multistop, System 200 with heating with heating Ø 75 Ø Ø Ø 75 Ø Ø Ø 75 Ø Ø 48 370.03 48 310.03 48 312.03 48 370.01 48 310.01 48 312.01 48 370.02 48 310.02 48 312.02 Ø H * Ø = Outer Diameter Installation area Ø 370 mm 75 96,5 93 93 EN 3/DIN 1986100 LGA Typetested and monitored guaranteed with tested quality Catalogue 2.3 147

Flatroof drains Ecoguss with drainage safety according to EN 3 / DIN 1986100 for gravity drainage System 200 Conversion to safety drain for single and double seal with damming ring Upgrade example: Single waterproofing Before Flatroof drain Ecoguss Articles: Page 147 2 Remove counterflange 1 Unlock pebble trap and remove 3 Insert damming ring as accessory according to Ø 75, or After Flatroof drain Ecoguss for drainage safety 148 Catalogue 2.3

Flatroof drains Ecoguss System 200 Choose one or more accessories as required: KESSELmodular design Combinations for any installation requirement Pebble trap made of polymer Upper section ABS with support rim and slotted cover 200 x 200 mm stainless steel, screwed 200 Art. # 48 303 Ecoguss damming ring for drainage safety The flatroof drain becomes a balcony drain Art. # 48 954 PP extension section with lip seal 200 350 230 46 92 Ø 75 Ø H: 35 mm Art. # 48 335 Ø H: 45 mm Art. # 48 345 Ecoguss spacer ring to adapt pebble trap to height of pebbles Art. # 48 302 PP temporary protective cover with drainage function Art. # 45 301 PP leaf trap Art. # 48 300 Multistop 200* as an odour, foam, rodent and insect stop Art. # 48 520 188 200 252 314 33 34,4 50,3 56 71 *) Only in combination with Art. # 48 958 Catalogue 2.3 Art. # 48 988 Extension section Insulating pieces flame proof, class A1 for Ecoguss flatroof drain without heating Art. # 48 352 for Ecoguss flatroof drain with heating Art. # 48 353 for Ecoguss flatroof drain extension section (Ø 200) Art. # 48 354 Galvanized steel reenforcement plate for roof applications Plate size: 600 x 600 mm Cutout: 270 mm Material thickness: 1.5 mm Art. # 48 351 30 175 200 with pressure sealing flange and Ecoguss counter flange for installation in waterproof concrete Art. # 48 958 450 mm 120 365 204 166 149

Gutter drains according to EN 752 System 200 Illustration and dimensioned drawing Article description Ø* Article # with odour trap and sludge trap Gutter drain made of polymer, Ø... Lateral outlet 2.5, 2.8 l/sec flow rate For frostfree depth 545 mm. With removable bellshaped odour trap, two extension sections, sludge trap. Rain inlet cover with protective pipe made of polymer. With wall securing device. made of polymer, Ø... Vertical outlet, 2.8 l/sec flow rate Lateral outlet: Ø 67 970 Vertical outlet: Ø 67 960 Installation area 380 x 320 mm EN 3 LGA Typetested and monitored guaranteed with tested quality with sludge trap Gutter drain made of polymer, Ø... Lateral outlet 2.5, 4.5 l/sec flow rate With sludge trap. Rain inlet cover with protective pipe in synthetic material. Lateral outlet: Ø 67 945 made of polymer, Ø... Vertical outlet, 4.5 l/sec flow rate 1 2 With wall securing device Without wall securing device Vertical outlet: 1 Ø 67 940 2 Ø 67 997 EN 3 LGA Typetested and monitored guaranteed with tested quality * Ø = Outer Diameter Installation area 380 x 320 mm 150 Catalogue 2.3

Yard drains according to EN 752 System 200 Illustration and dimensioned drawing Article description Ø* with lateral or vertical outlet Art. # 67 020.30 Installation area lateral outlet: 380 x 320 mm Installation area vertical outlet: 320 x 320 mm with upper section made of Ecoguss, Class B 258 40 150 System 200 Yard drain made of polymer, Ø Outlet 1 Lateral outlet 2.5, 2 Vertical outlet, 4.5 l/sec flow rate Upper section with support rim. Slotted cover Class... With lip seal and protective cover for use during construction. Weight: Class A15 approx. 4.2 kg. Accessories Sludge trap Art. # 67 300 Odourtrap (consider frost free installation depth) Art. # 27 171 EN 3 LGA Typetested and monitored guaranteed with tested quality Yard drain Ecoguss 200 with drain body made of polymer and upper section made of Ecoguss, outlet Ø 1 Lateral outlet 2.5, 2 Vertical outlet, 4.5 l/sec flow rate Upper section with square support rim. Slotted cover Class B made of Ecoguss with Lock & Lift System Article # Lateral outlet: Ø 67 020.30 1 2 1 2 Vertical outlet: Ø 67 060.30 Lateral outlet: Ø 67 923 B Vertical outlet: Ø 67 922 B 2 * Ø = Outer Diameter 1 Art. # 67 923 B with odour trap 102 Installation area 215 x 215 mm pipe connection drain 196 Ø H H1 194 x 194 157 258 247 235 77 79 H H1 40 Installation area Ø 215 mm Alrondo Yard drain made of polymer, Vertical outlet, 1.6 l/sec flow rate With integrated odour trap. Cover plate 200 x 200 mm with round slotted cover Ø 140 mm made of polymer, screwed Can be driven over by vehicles of up to 2 ton. Ecoguss Yard drain in Ecoguss, Ø Vertical outlet, 4.5 l/sec flow rate With sludge trap. 1 Upper section with square support rim in Ecoguss and round slotted cover Ø 235 mm, with Lock & Lift System, Class B. 2 Upper section with round support rim in Ecoguss and round slotted cover Ø 235 mm, with Lock & Lift System, Class B. EN 3 Ø Ø Ø 37 287S 67 B 67 111 B Catalogue 2.3 151

Gutter drains, Yard drains System 200 Choose a drain body: KESSELmodular design Combinations for any installation requirement Drain body made of polymer 4.5 l/sec flow rate Lateral outlet 2.5 Ø Art. # 67 000 Vertical outlet Ø Art. # 67 040 Choose an upper section / cover: Upper section with support rim in Ecoguss with round slotted cover in Ecoguss Ø 235 mm with Lock & Lift System, Class B height adjustable from 40 150 mm. Art. # 67 985 Polymer slotted cover Class A15 / L15 Art. # 27 173 Polymer support rim Class A15 / L15 Art. # 27 180 Polymer cover plate Class A15 / L15, sealed with respect to surface water Art. # 67 775 Polymer rain inlet cover with protective pipe Ø Art. # 67 750 198 258 200 44 Upper section made of polymer... Height adjustable from 40 150 mm. Art. # 67 400 Polymer rain inlet cover for additional surface drainage with protective pipe Ø Art. # 67 700 152 Catalogue 2.3

Gutter drains, Yard drains System 200 Choose one or more accessories as required: KESSELmodular design Combinations for any installation requirement Polymer extension section Installation height 240 mm Art. # 67 500 Polymer extension section with laterial inlet Art. # 67 600 Bellshaped odour trap insert, PP Sealing water height 100 mm Art. # 27 171 Bellshaped odour trap insert, PP Sealing water height 70 mm Art. # 27 170 70 127 136 Bellshaped odour trap, stainless steel 1.4301 removable, Sealing water height 70 mm Art. # 27 182 Lip seal Art. # 27 140 Lip seal Nonslip mounting Art. # 27 141 196 218 Sludge trap, PEHD Art. # 67 300 Multistop for Art. # 67 B and 67 111B Art. # 48 500 120 39 Wall securing device Multistop* for gutter drains Art. # 67 800 as an odour, foam, rodent and insect stop Ø 200 Art. # 48 520 200 71 *) for Art. # 67 985, 67 923B, 67 922B Lifting mechanism for removing odour trap Art. # 850 144 Locking and removal key for Ecoguss drain covers with Lock & Lift System. Art. # 67 007 Catalogue 2.3 153

Yard drains according to EN 752 System 400 KESSEL Professional advantages Variable upper section rotatable inclinable height adjustable Side inlets up to a nominal width of Ø 160 via drilling on the side, can be connected very easily and quickly. Optimum cleaning of the pipes by removing the odour trap/sludge trap Can be adapted to the level of the floor Can be expanded and combined using supplementary parts Fuel resistant Can bear lorries weighing up to 40 ton. KESSEL modular system/accessories see Page 156 157 Illustration and dimensioned drawing Article description Ø* Article # with sludge trap 325 55 185 400 322 563 75 D System 400 Yard drain in polyethylene, Ø... Lateral outlet, 4.5 l/sec flow rate With sludge trap. For installation depth (D) from 380 to 510 mm, watertight, resistant to aggressive wastewater. With fuelresistant gaskets. Upper section with slotted cover Class A made of polymer, Class B, D in cast iron according to EN 124 for continuous height and level adjustment. Ø Ø 160 851 100A 851 100B 851 100D 851 150A 851 150B 851 150D Art. # 851 A Installation area 585 x 535 mm Weight: Class A approx. 10 kg Class B approx. 12.5 kg Class D approx. 20 kg * Ø = Outer Diameter 154 Catalogue 2.3

Yard drains according to EN 752 System 400 Illustration and dimensioned drawing Article description Ø* Article # with odour trap and sludge trap 525 55 185 400 322 563 75 290 D System 400 Yard drain in polyethylene, Ø... Lateral outlet, 4.5 l/sec flow rate With odour trap and sludge trap. For installation depth (D) from 580 to 710 mm, watertight, resistant to aggressive wastewater. With fuelresistant gaskets. Upper section with slotted cover Class A made of polymer, Class B, D in cast iron according to EN 124 for continuous height and level adjustment. Weight: Class A approx. 20 kg Class B approx. 23 kg Class D approx. 30 kg Ø Ø 160 851 101A 851 101B 851 101D 851 151A 851 151B 851 151D Art. # 851 101A Installation area 585 x 535 mm with odour trap and sludge trap 675 55 405 400 322 563 75 290 System 400 Yard drain in polyethylene, Ø... Lateral outlet, 4.5 l/sec flow rate With odour trap and sludge trap. For installation depth (D) from 730 to 1080 mm, watertight, resistant to aggressive wastewater. With fuelresistant gaskets. Upper section with slotted cover Class A made of polymer, Class B, D in cast iron according to EN 124 for continuous height and level adjustment. Weight: Class A approx. 45 kg Class B approx. 47.5 kg Class D approx. 55 kg Ø Ø 160 851 102A 851 102B 851 102D D 851 152A 851 152B 851 152D Art. # 851 102A Installation area 585 x 535 mm * Ø = Outer Diameter Catalogue 2.3 155

Yard drains System 400 for higher load classes Choose a drain body: KESSELmodular design Combinations for any installation requirement Polyethylene drain bodies closed Art. # 850 008 Open channel passage L 450 with outlet Ø Art. # 850 009 Ø 160 Art. # 850 010 Open channel passage L 450 Inlet/Outlet Ø 160, L=726 mm, H=259 mm, Art. # 850 001 Inlet Ø 160/Outlet Ø 200, L=746 mm, H=259 mm, Art. # 850 002 Inlet/Outlet Ø 200, L=756 mm, H=304 mm, Art. # 850 003 Inlet Ø 200/Outlet Ø 250, L=771 mm, H=304 mm, Art. # 850 004 Inlet/Outlet Ø 160, L=726 mm, H=259 mm, Art. # 850 005 Inlet/Outlet Ø 200, L=756 mm, H=306 mm, Art. # 850 006 Inlet/Outlet Ø 250, L=790 mm, H=344 mm, Art. # 850 007 Choose an upper section / cover: Upper section with clamping ring... Cover plates polymer cast iron cast iron Class A Art. # 850 132 Class B Art. # 850 131 Class D Art. # 850 136 Class A, B, continuously height adjustable Art. # 850 120 Slotted covers polymer cast iron cast iron Class A Art. # 850 134 Class B Art. # 850 135 Class D Art. # 850 137 Class D, continuously height adjustable Art. # 850 121 156 Catalogue 2.3

Yard drains System 400 for higher load classes Choose one or more accessories as required: KESSELmodular design Combinations for any installation requirement Polyethylene extension section Art. # 850 101 Transition sections Transition section 450 Art. # 850 102 Connecting wedges, 4 pieces Art. # 850 111 Polymer sludge trap Art. # 850 115 Transition section 360 Art. # 850 103 Profiled gaskets Profiled gasket 450 Art. # 850 113 Odour traps Ø Art. # 850 141 Ø 160 Art. # 850 142 Pressure sealing flange for upper section Art. # 83 021 Profiled gasket 360 Art. # 850 112 Gaskets for pipe conduits Ø 50 Art. # 850 114 Ø 75 Art. # 850 116 Ø Art. # 850 117 Ø Art. # 850 118 Ø 160 Art. # 850 119 Hole saw for drilling lateral surfaces for inlets and outlets Ø 50, 75,, and 160 (Saw blade holder Ø = 190 mm) Art. # 50 100 Elastomer waterproof membrane in NK/SBR Art. # 83 022 Lifting mechanism for removing odour trap Art. # 850 143 Catalogue 2.3 157

Street gullies Ø 400 Illustration Article description Standard manhole cover onsite Upper section Lip seal Inspection chamber Accessories: Rodent protection flap Chamber height 573785 mm 10 100 mm Installation depths from 573 to 825 mm possible Street gullies Ø 400 in polyethylene For underground installation Installation depth (D) 573 mm to 785 mm (Height without manhole upper section), with monolithic structure, resistant against aggressive wastewater, frost and deicing salts, with outlet Ø 160 suitable for connection of PVC pipe according to DIN 19534 and PEHD pipe according to DIN 19537 with lateral outlet couplings Ø 160; 10 With upper section 50 x 50 cm: Art. #: 81 10 10 With upper section 30 x 50 cm: Art. #: 81 10 11 with lateral outlet couplings Ø 160; 0 With upper section 50 x 50 cm: Art. #: 81 10 40 With upper section 30 x 50 cm: Art. #: 81 10 41 Standard manhole cover onsite Upper section Lip seal Inspection chamber Accessories: Rodent protection flap Chamber height 1085 1296 mm 10 100 mm Installation depths from 1085 to 1336 mm possible with lateral outlet couplings Ø 160/200/250; 2 With upper section 50 x 50 cm: Art. #: 81 10 30 With upper section 30 x 50 cm: Art. #: 81 10 31 Street gullies with wet sludge trap Ø 400 in polyethylene, with lateral outlet couplings Ø 160 For underground installation Installation depth (D) 1085 mm to 1296 mm (Height without manhole upper section), with monolithic structure, resistant against aggressive wastewater, frost and deicing salts, with outlet Ø 160 suitable for connection of PVC pipe according to DIN 19534 and PEHD pipe according to DIN 19537 with lateral outlet couplings Ø 160; 10 With upper section 50 x 50 cm: Art. #: 81 10 20 With upper section 30 x 50 cm: Art. #: 81 10 21 with lateral outlet couplings Ø 160; 0 With upper section 50 x 50 cm: Art. #: 81 10 60 With upper section 30 x 50 cm: Art. #: 81 10 61 Illustration shows Art. # 81 10 20 Illustration Accessories Article description Article # Lip seal suitable for street gullies 81 10 51 158 Catalogue 2.3 Rodent protection flap suitable for street gullies 81 10 50