How To Drain A Drainline Grating

Transcription

1 SECTION 16 ACO Drain Channel Drainage and Landscaping Systems ACO HexDrain Page 240 ACO HexDrain Garage Pack Page 242 ACO HexDrain Brickslot Page 243 ACO RainDrain Page 244 ACO GroundGuard Page 246 ACO MultiDrain TM MD Page 247 ACO S Range Page 269 ACO KerbDrain Page 281 ACO ParkDrain Page 283 ACO RoadDrain Page 286 ACO Qmax Page 289 Pricing information at: 239

2 Introduction Throughout the world, the ACO brand is recognised as a leading supplier in the design, development and manufacture of surface water drainage. An extensive portfolio offers the market quality solutions for every application, whether light domestic or heavy duty use. The group has over 40 years experience of channel drainage installation, with more than 5 million metres of ACO products installed in the UK - and more than 100 million metres worldwide. ACO Technologies plc is the UK division of the ACO Group. Established in 1984, ACO Technologies plc uses a diverse range of materials including polymer concrete, iron, steel and plastic to develop innovative products that are supported by a comprehensive design and after sales service. ACO manufacture drainage solutions for every application including Internal and Building Drainage, Landscaping, Retail, Distribution centres, Highways and Airports. Its product portfolio consists of traditional channel and grate assemblies, monocast and high capacity drainage systems as well as solutions for environmentally sensitive projects. Full product and technical information is available to download from the ACO website. Please see ACO HexDrain ACO HexDrain - ideal for all domestic applications. ACO HexDrain is a revolutionary high quality, high strength domestic channel drainage system. Manufactured from recycled polypropylene, ACO HexDrain standard channel assembly consists of a black plastic channel with a choice of either a black plastic or galvanised steel grating. A of accessories are also available to complement the system including a corner unit, an accessory pack and a metallic effect plastic grating. It is ideal for a wide range of domestic and light traffic applications and is fully certified and CE marked to BS EN 1433: 2002 Load Class A15. The system uses an engineered hexagonal base to maximise strength and rigidity, while simplifying installation. 240 Pricing information at:

3 Simple and easy to install Ideal for domestic and light vehicle traffic applications Lightweight design Easy to handle, quick to install Unique variable outlet position Friction-fit, anti-shunt grating Easily cut to 500 lengths Typically will drain 150m2 Range of accessories including corner unit, closing end caps, Ø110 outlet connector, leaf guard and metallic effect plastic grating ACO HexDrain channel and grating assemblies Product Part No. () width depth () () () () Channel with black plastic grating 1m Channel with galvanised steel grating 1m ACO HexDrain Options and Accessories Product Part No. () width depth () () () () Metallic effect plastic grating Galvanised steel grating Corner unit with black plastic grating with vertical outlet Corner unit with metallic effect plastic grating Black plastic sump Ø Accessories bag* *Accessory bag consists of ACO HexDrain closing endcap (x2), ACO Hexdrain outlet connector, ACO HexDrain leafguard and instruction document. Full installation instructions are shown on the underside of the channel. PLEASE NOTE: gratings must be fitted before channel is laid. HexDrain channel and grating. Pricing information at: 241

4 ACO HexDrain garage pack ACO HexDrain Garage Pack. The garage pack is based around the high strength domestic channel ACO HexDrain, and has been designed to contain everything needed to install a domestic drainage system across a garage threshold. The garage pack contains three 1m channels of ACO HexDrain, two end caps, a vertical outlet connector and a leaf guard, with printed installation instructions on both the pack and the channel itself. Designed to be easy to handle, the pack is wrapped in a waterproof cover and provides minimal packaging waste. ACO HexDrain Plus garage pack Product Part No. Wgt width depth () () () () ACO HexDrain Garage Pack For contents list and dimensions see chart below ACO HexDrain Garage Pack Contents Product Wgt width depth () () () () () 3 x 1m channel with black plastic grating x closing endcaps x vertical outlet connector x leaf guard x instruction document Pricing information at:

5 ACO HexDrain Brickslot ACO HexDrain Brickslot provides a discreet slot drainage system for domestic block paving installations and threshold drainage. The system is ideal for a wide range of domestic and light traffic applications and is fully certified and CE marked to Load Class A15 BS EN 1433:2002. ACO HexDrain Brickslot installed. Manufactured from 100% recycled polypropylene, this system is based on the highly successful ACO HexDrain domestic drainage channel. The 1m black channel has been combined with a new off-set 10 slot cover specifically designed for use with 50 and 60 block paving. The hexagonal design structure of the system provides exceptional strength and rigidity whilst keeping weight to a minimum. A range of innovative features and accessories such as the corner unit for maintenance access, ensures that the system makes installing stylish domestic drainage easier than ever. Lightweight design Cover compatible with up to and including 60 deep block paving Easy and quick to install Easily cut to 500 lengths Off-set slot enables drainage location adjacent to walls and door thresholds Installation guide clearly marked on the brickslot cover Channels clip together for easy and simple on-site fabrication Full accessory packs aid professional installation. ACO HexDrain Brickslot. ACO HexDrain Brickslot channel assembly Product width depth Channel with black plastic slotted grating 1m ACO HexDrain Brickslot Accessories Product width depth Corner unit with black plastic slotted grating with vertical outlet Black plastic sump unit 174 Ø Accessory bag* * Accessory bag consists of ACO HexDrain closing endcap (x2), ACO HexDrain outlet connector, ACO HexDrain leafguard and instruction document Pricing information at: 243

6 ACO RainDrain ACO RainDrain. ACO RainDrain is a versatile domestic polymer concrete channel system, suitable for most surfaces including block paving. The system is fully certified and CE marked to BS EN 1433: 2002 Load Class A15 and B125, depending on whether the standard galvanised steel or optional iron grating is selected. Manufactured from Vienite, ACO s high strength polymeric based recycled material, ACO RainDrain standard channel assembly consists of a 1m channel and galvanised steel grating. This assembly is ideal for pedestrian areas and domestic drives and is certified to Load Class A 15. An additional cast iron grating is available for light vehicle traffic in Load Class B125 applications, and a full set of accessories is available to provide a wide variety of quick and professional installations. Traditional channel and grate appearance Easy to handle, quick to install Clip locking gratings for secure installation Channel design improves flow velocity, promotes self cleansing Typically will drain 170m2 Ideal for domestic and light vehicle traffic applications Fully certified and CE marked to BS EN 1433: 2002 Load Class A15 and B125 Range of accessories including cast iron grating, sump unit, closing end cap, Ø110 outlet end cap, horizontal foul air trap and Ø110 drain union. Manufactured from recycled materials. 244 Pricing information at:

7 ACO RainDrain channel and galvanised steel grating assembly Product Part No. Wgt width depth () () () () Type () Channel with galvanised steel grating 1m ACO RainDrain options and accessories Product Part No. Wgt width depth () () () () Type () Cast Iron grating 500 B Galvanised steel grating 1000 A Sump with galvanised steel grating c/w sediment bucket Closing end cap Outlet endcap Ø Horizontal foul air trap Drain union PVC-U Ø Lifting tool 5 slots Note: B 125 Load Class only with grating Raindrain channel complete with galvanised steel clip-in grating and vertical knockout. Suitable for Load Class A15 applications. An optional cast iron grating is available to suit Load Class B125 applications. Pricing information at: 245

8 ACO GroundGuard ACO GroundGuard installed. ACO GroundGuard tile. ACO GroundGuard is an award-winning lightweight ground reinforcement system. Ideal for stabilising grass or gravel, it helps eliminate the risks of pot holes, rutting or grass damage. The system is suitable for a wide variety of applications including paths, drives, parking areas and emergency access routes. Manufactured from recycled plastic, ACO GroundGuard is lightweight and easy to install. Correctly fitted, ACO GroundGuard has been certified to 250 tonnes per square metre making it suitable for a variety of lightweight to heavy duty applications. ACO GroundGuard also permits a reduced rate of surface water run-off as it is totally porous, saving cost on unnecessary drainage installation. Ideal for a wide variety of applications including vehicle and pedestrian traffic, fire access lanes and parking areas Lightweight - just 1 per piece Easy to handle and install; simple clip-together fix Easily cut to shape for irregular edging Cost effective solution - competitive with asphalt or block paving Suitable for gradients up to 5% or steeper when pegged Eliminates gravel migration and raking ACO GroundGuard Product Part No. Wgt width depth () () () () ACO GroundGuard Tile White parking bay marker Note: 4.42 tiles per 1m Pricing information at:

9 ACO MultiDrain TM MD System - General purpose general channel drainage system ACO MultiDrain TM MD System is the latest generation of high quality grated channel drainage system from the world s leading surface water drainage company. Designed to provide an economical solution for the efficient removal of surface water, the system maximizes functionality whilst using the minimum of components. Manufactured from Vienite, ACO s high strength polymeric based recycled material; the channel unit forms the main component of the system. A wide choice of boltless gratings are available to compliment the ACO Multidrain TM MD System. Traditional and discreet slot gratings, solid covers and cross footpath drainage units are available to ensure a wide variety of applications are catered for. To support a wide variety of catchment depths, hydraulic capacities and applications, the system is available in three channel widths, 100, 150 and 200, and has a range of constant, shallow and sloping depth channels to suit the drainage design. Full support is available with drainage schemes and technical advice; please contact the ACO Design Services Team. The system is fully certified and CE marked to BS EN 1433: 2002 from Load Class A 15 pedestrian areas, up to and including Load Class D 400 suitable for parking of all types of road vehicles. This system is not suitable for carriageways of public roads or motorways. Provides efficient drainage solution for a wide variety of applications Traditional channel and grate solution The ACO Multidrain TM MD System is available in three channel widths: 100, 150 and 200 Range of constant, sloped and shallow depth channels available Protective UltraSTEEL TM galvanised edge rails for improved strength and bonding between channel and surface materials. Also available in stainless steel V shaped channel bore improves speed of water flow and promotes self cleansing Extensive choice of gratings and accessories increase range of applications Unique ACO Drainlock TM grating fixing reduces blockage and improves hydraulic capacity ACO MultiDrain TM MD System Pricing information at: 247

10 ACO MultiDrain TM MD System installed ACO MultiDrain TM MD Hydraulics suary This table assumes a rainfall intensity of 50/h and zero slope along the channel Channel channel height () Maximum area drained (m 2 ) Run of 10m Run of 20m Run of 30m Run of 50m Run of 100m M100D M100D M100D M100D M100D M100D M150D M150D M150D M150D M200D M200D M200D M200D Pricing information at:

11 ACO MultiDrain TM M100D Parts tables ACO M100D constant and sloping depth channels with UltraSTEEL galvanised edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M100D No. 0.0* M100D /602/607 M100D No.306 M100D No. 0.1J* M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No.10.0* M100D /602/607 M100D No.306 M100D No. 123 M100D No.10.1J* M100D /602/607 M100D No.306 M100D No. 123 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No / / M100D /602/607 M100D No.306 M100D No.20.0* M100D /602/607 M100D No.306 M100D No. 123 M100D No.20.1J* M100D /602/607 M100D No.306 M100D No. 123 M100D No.30.0* M100D /602/607 M100D No.306 M100D No. 123 M100D No.30.1J* M100D /602/607 M100D No.306 M100D No. 123 * Indicates channels supplied with a preformed Ø110 knockout for vertical outlet. J Indicates side knockout for 90º channel connection. Knockout on both sides of the channel ACO M100D shallow depth channels with UltraSTEEL galvanised edge rails Knockout Union sump Connection availability Gully unit Multifunctional endcap M100D No M100D /602/607 M100D No.306 M100D No. 075V M100D /602/607 M100D No.306 M100D No M100D /602/607 M100D No.306 M100D No. 0100V M100D /602/607 M100D No.306 Step Connector V Indicates channel with cast in TPE triple lipped seals for water tight connection Pricing information at: 249

12 Multifunctional endcap (closing/inlet/outlet) M100D No.306 universal endcap / The universal end cap can be cut down to suit all M100D channels Step connector M100D No step connector ACO M100D sump unit with UltraSTEEL galvanised edge rails M100D universal sump with plastic silt bucket Foul air traps 820 Drain union PVC U Ø110 (max 12.2 / 16.6 l/s) 822 Drain union PVC U Ø160 (max 36.5 l/s) 920 foul air trap PVC U Ø110 (max 13.5 l/s) 922 foul air trap PVC U Ø160 (max 32 l/s) 940 Roddable foul air trap MDPE Ø110 (max 15.5 l/s) 950 Roddable foul air trap MDPE Ø160 (max 29 l/s) Pricing information at:

13 Universal Gully and accessories Gully assembly and bucket Gully assembly and bucket Gully top assembly Base unit Ø375 Ø Intermediate unit Grating and frame Connector Ø500 7 Bucket polythene Ø275 Ø Gratings for use with ACO MultiDrain M100D channels - with UltraSTEEL galvanised edge rails. Gratings for Load Class A 15 applications slot width / hole dia () Slotted galvanised steel 400DL Slotted galvanised steel 402DL Perforated galvanised steel 12666DL Perforated galvanised steel 12667DL DL/402DL Slotted galvanised steel 12666DL/12667DL Perforated galvanised steel Pricing information at: 251

14 Gratings for Load Class C 250 applications slot width / hole dia () Heelguard composite - black 522DL* Intercept ductile iron 507DL x Slotted galvanised steel 423DL Slotted galvanised steel 424DL Perforated galvanised steel 12656DL Perforated galvanised steel 12657DL Mesh galvanised steel 410DL x Mesh galvanised steel 412DL x * Indicates security locking available Left: 522DL Heelguard composite Right: 507DL Intercept ductile iron Left: 423DL/424DL Slotted galvanised steel Right: 12656DL/12657DL Perforated galvanised steel 410DL/412DL Mesh galvanised steel 252 Pricing information at:

15 Gratings for Load Class C 250 / D 400 applications slot width / hole dia () Heelguard ductile iron 23405DL* Ductile iron solid cover 23406DL n/a Slotted ductile iron 23408DL * Indicates security locking available Left: 23405DL Heelguard ductile iron Right: 23406DL Ductile iron solid cover 23408DL Slotted ductile iron Gratings accessories () Drainlock security locking assembly n/a n/a n/a n/a 0.1 Drainlock security key n/a n/a n/a n/a 0.01 Drainlock grating lifting tool n/a n/a n/a n/a 0.1 * Indicates security locking available Pricing information at: 253

16 ACO MultiDrain TM M100DS Parts tables ACO M100DS constant depth channels with stainless steel edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M100DS No. 0.0* M100DS /602/607 M100D No.306 M100DS No. 0.1J* M100DS /602/607 M100D No.306 M100DS No.10.0* M100DS /602/607 M100D No.306 M100D No. 123 M100DS No.10.1J* M100DS /602/607 M100D No.306 M100D No. 123 M100DS No.20.0* M100DS /602/607 M100D No.306 M100D No. 123 M100DS No.20.1J* M100DS /602/607 M100D No.306 M100D No. 123 * Indicates channels supplied with a preformed Ø110 knockout for vertical outlet. J Indicates side knockout for 90º channel connection. Knockout on both sides of the channel ACO M100DS shallow channels with stainless steel edge rail Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M100DS No M100DS /602/607 M100D No.306 M100DS No. 075V M100DS /602/607 M100D No.306 M100DS No M100DS /602/607 M100D No.306 M100DS No. 0100V M100DS /602/607 M100D No.306 V Indicates channel with cast in TPE triple lipped seals for water tight connection Multifunctional endcap (closing/inlet/outlet) M100D No.306 universal endcap / The universal end cap can be cut down to suit all M100DS channels Step connector M100D No step connector Pricing information at:

17 ACO M100DS sump unit with stainless steel edge rails M100DS universal sump with plastic silt bucket For ACO Universal Gully and foul air traps please refer to the ACO MultiDrain M100D section. See page 233. Gratings for use with ACO MultiDrain M100DS channels - with stainless steel edge rails. Gratings for Load Class A 15 applications slot width / hole dia () Slotted stainless steel 460DL Slotted stainless steel 461DL Perforated stainless steel 12664DL Perforated stainless steel 12665DL DL/461DL Slotted stainless steel 12664DL/12655DL Perforated stainless steel Pricing information at: 255

18 Gratings for Load Class C 250 applications slot width / hole dia () Slotted stainless steel 470DL Slotted stainless steel 471DL Perforated stainless steel 12654DL Perforated stainless steel 12655DL Mesh stainless steel 430DL x Mesh stainless steel 431DL x DL/471DL Slotted stainless steel 12654DL/12655DL Perforated stainless steel 430DL/431DL Mesh stainless steel Grating accessories for M100DS () Drainlock grating lifting tool n/a n/a n/a n/a Pricing information at:

19 ACO MultiDrain TM M150D Parts tables ACO M150D constant depth channels with UltraSTEEL galvanised edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M150D No. 0.0* M150D /602/607 M150D No.306 M150D No. 0.1J* M150D /602/607 M150D No.306 M150D No.10.0* M150D /602/607 M150D No.306 M150D No.123 M150D No. 10.1J* M150D /602/607 M150D No.306 M150D No.123 M150D No.20.0* M150D /602/607 M150D No.306 M150D No.123 M150D No. 20.1J* M150D /602/607 M150D No.306 M150D No.123 * Indicates channels supplied with a preformed Ø160 knockout for vertical outlet. J Indicates side knockout for 90º channel connection. Knockout on both sides of the channel ACO M150D shallow depth channels with UltraSTEEL galvanised edge rails 160 Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M150D No M150D /602/607 M150D No.306 M150D No. 100V M150D /602/607 M150D No.306 V Indicates channel with cast in TPE triple lipped seals for water tight connection Multifunctional endcap (closing/inlet/outlet) 110 M150D No.306 universal endcap / The universal end cap can be cut down to suit all M150D channels Step connector M150D No step connector Pricing information at: 257

20 ACO M150D sump unit with UltraSTEEL galvanised edge rails M150D universal sump with plastic silt bucket For ACO Universal Gully and foul air traps please refer to the ACO MultiDrain M100D section. See page 233. Gratings for use with ACO MultiDrain M150D channels - with UltraSTEEL galvanised edge rails. Gratings for Load Class C 250 applications slot width / hole dia () Intercept ductile iron 13073DL x Mesh galvanised steel 13018DL x Mesh galvanised steel 13019DL x DL Intercept ductile iron 13018DL/13019DL Mesh galvanised steel 258 Pricing information at:

21 Gratings for Load Class C 250 / D 400 applications slot width / hole dia () Heelguard ductile iron 23161DL* Ductile iron solid cover 23160DL n/a Slotted ductile iron 23164DL * Indicates security locking available 23161DL Heelguard ductile iron Gratings accessories 23164DL Slotted ductile iron 23160DL Ductile iron solid cover () ACO MultiDrain TM M150DS Parts tables Drainlock security locking assembly n/a n/a n/a n/a 0.1 Drainlock security key n/a n/a n/a n/a 0.01 Drainlock grating lifting tool n/a n/a n/a n/a 0.1 ACO M150DS constant depth channels with stainless edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M150DS No. 0.0* M150DS /602/607 M150D No.306 M150DS No. 0.1J* M150DS /602/607 M150D No.306 M150DS No.10.0* M150DS /602/607 M150D No.306 M150D No.123 M150DS No. 10.1J* M150DS /602/607 M150D No.306 M150D No.123 M150DS No.20.0* M150DS /602/607 M150D No.306 M150D No.123 M150DS No. 20.1J* M150DS /602/607 M150D No.306 M150D No.123 * Indicates channels supplied with a preformed Ø160 knockout for vertical outlet. J Indicates side knockout for 90 channel connection. Knockout on both sides of the channel Pricing information at: 259

22 ACO M150DS shallow depth channels with stainless steel edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M150DS No M150DS /602/607 M150D No.306 M150DS No. 0100V M150DS /602/607 M150D No.306 V Indicates channel with cast in TPE triple lipped seals for water tight connection Multifunctional endcap (closing/inlet/outlet) M150D No.306 universal endcap / The universal end cap can be cut down to suit all M150DS channels Step connector M150D No step connector ACO M150DS sump unit with stainless steel edge rails M150DS universal sump with plastic silt bucket For ACO Universal Gully and foul air traps please refer to the ACO MultiDrain M100D section. See page Pricing information at:

23 Gratings for use with ACO MultiDrain M150DS channels - with stainless steel edge rails. Gratings for Load Class C 250 applications slot width / hole dia () Mesh stainless steel 13048DL x Mesh stainless steel 13049DL x DL/13049DL Mesh stainless steel ACO MultiDrain TM M200D Parts tables ACO M200D constant depth channels with UltraSTEEL galvanised edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M2000D No. 0.0* M200D /602/607 M200D No.306 M200D No. 0.1J* M200D /602/607 M200D No.306 M200D No.10.0* M200D /602/607 M200D No.306 M200D No.123 M200D No. 10.1J* M200D /602/607 M200D No.306 M200D No.123 M2000D No.20.0* M200D /602/607 M200D No.306 M200D No.123 M2000D No. 20.1J* M200D /602/607 M200D No.306 M200D No.123 * Indicates channels supplied with a preformed Ø160 knockout for vertical outlet. J Indicates side knockout for 90º channel connection. Knockout on both sides of the channel ACO M200D shallow depth channels with UltraSTEEL galvanised edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M200D No M200D /602/607 M200D No.306 M200D No. 0100V M200D /602/607 M200D No.306 V Indicates channel with cast in TPE triple lipped seals for water tight connection Pricing information at: 261

24 Multifunctional endcap (closing/inlet/outlet) M200D No.306 universal endcap / The universal end cap can be cut down to suit all M200D channels Step connector 120 M200D No step connector ACO M200D sump unit with UltraSTEEL galvanised edge rails M200D universal sump with plastic silt bucket For ACO Universal Gully and foul air traps please refer to the ACO MultiDrain M100D section. See page 233. Gratings for use with ACO MultiDrain M200D channels - with UltraSTEEL galvanised edge rails. Gratings for Load Class C 250 applications slot width / hole dia () Intercept ductile iron 13473DL x Mesh galvanised steel 13418DL x Mesh galvanised steel 13419DL x Left: 13473DL/13049DL Intercept ductile iron Right 13418DL/13419DL Mesh galvanised steel 262 Pricing information at:

25 Gratings for Load Class C 250 / D 400 applications slot width / hole dia () Heelguard ductile iron 23221DL* Ductile iron solid cover 23220DL n/a Slotted ductile iron 23224DL * Indicates security locking available Left: 23221DL Heelguard ductile iron Right 23220DL Ductile iron solid cover 23224DL Slotted ductile iron Gratings accessories () Drainlock security locking assembly n/a n/a n/a n/a 0.1 Drainlock security key n/a n/a n/a n/a 0.01 Drainlock grating lifting tool n/a n/a n/a n/a 0.1 ACO MultiDrain TM M200DS Parts tables ACO M200DS constant depth channels with stainless steel edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M200DS No. 0.0* M200DS /602/607 M200D No.306 M200D No.123 M200DS No. 0.1J* M200DS /602/607 M200D No.306 M200D No.123 M200DS No.10.0* M200DS /602/607 M200D No.306 M200D No.123 M200DS No. 10.1J* M200DS /602/607 M200D No.306 M200D No.123 M200DS No.20.0* M200DS /602/607 M200D No.306 M200D No.123 M200DS No. 20.1J* M200DS /602/607 M200D No.306 M200D No.123 * Indicates channels supplied with a preformed Ø110 knockout for vertical outlet. J Indicates side knockout for 90º channel connection. Knockout on both sides of the channel Pricing information at: 263

26 ACO M200DS shallow depth channels with stainless steel edge rails Connection availability Knockout Union sump Gully unit Multifunctional endcap Step Connector M200D No M200DS /602/607 M200D No.306 M200D No.123 M200D No. 0100V M200DS /602/607 M200D No.306 M200D No.123 V Indicates channel with cast in TPE triple lipped seals for water tight connection Multifunctional endcap (closing/inlet/outlet) M200D No.306 universal endcap / The universal end cap can be cut down to suit M200DS all channels Step connector M200D No step connector ACO M200DS sump unit with stainless steel edge rails M200DS universal sump with plastic silt bucket For ACO Universal Gully and foul air traps please refer to the ACO MultiDrain M100D section. 264 Pricing information at:

27 Gratings for use with ACO MultiDrain M200DS channels - with UltraSTEEL galvanised edge rails. Gratings for Load Class C 250 applications slot width / hole dia () Mesh stainless steel 13448DL x Mesh stainless steel 13449DL x DL/134049DL Mesh stainless steel ACO MultiDrain TM MD Brickslot ACO MultiDrain TM MD has a range of gratings to complement installations which require discreet slot drainage. Designed as a standard with a heelgaurd of 10 off set drainage inlet, ACO Brickslot is a subtle and unobtrusive continous slot drainage system, with high hydraulic efficiency for fast removal of surface water. ACO Brickslot grating is available in galvanised and stainless steel and is suitable for use with the 100 and 150 wide channels in the ACO MultiDrain TM MD range. The system includes an ACO Brickslot access unit to ensure easy maintenance and access to the drainage system, and is also fully compatible with the range of ACO MultiDrain TM MD accessories. The system is suitable for Load Class D 400 applications (This product is not suitable for carriageways of public roads or motorways). Pricing information at: 265

28 The ACO Brickslot gratings are listed in the charts below and are sold separately to the channel units. For information on the ACO MultiDrain TM M100D and M150D channels, please refer to the beginning of the ACO MultiDrain TM chapter. ACO Brickslot galvanised ACO Brickslot stainless steel ACO Brickslot gratings suitable for use with ACO MultiDrain M100D channels Gratings for Load Class C 250 applications slot width / hole dia () Brickslot galvanised steel Brickslot galvanised steel Gratings for Load Class C 250 / D 400 applications slot width / hole dia () Brickslot galvanised steel Brickslot galvanised steel Brickslot stainless steel Brickslot stainless steel ACO Brickslot gratings suitable for use with ACO MultiDrain M150D channels Gratings for Load Class C 250 applications slot width / hole dia () Brickslot galvanised steel Brickslot galvanised steel Brickslot stainless steel Brickslot stainless steel ACO Brickslot Access covers suitable for use with ACO MultiDrain M100D channels Access covers for Load Class C 250 applications slot width / hole dia () Brickslot access unit galvanised steel Pricing information at:

29 Access covers for Load Class C 250 / D 400 applications slot width / hole dia () Brickslot access unit galvanised steel Brickslot access unit stainless steel ACO Brickslot Access covers suitable for use with ACO MultiDrain M150D channels Access covers for Load Class C 250 / D 400 applications slot width / hole dia () Brickslot access unit galvanised steel Brickslot access unit stainless steel ACO Brickslot access unit galvanised ACO Brickslot access unit stainless Pricing information at: 267

30 ACO MultiDrain TM CFD The ACO MultiDrain TM M100D system includes a range of accessories which provide a drainage solution ideal for areas where down pipes from roofs and gutters exit onto the pavement. The ACO Channel Footpath drainage system effectively carries water away from the paved areas and across into the adjacent carriageway. The system uses ACO MultiDrain TM M100D shallow depth channels and has two types of kerb outlets and down pipe connectors to suit application requirements. For information on the ACO MultiDrain TM M100D shallow depth channels, please refer to the beginning of the ACO MultiDrain TM chapter. ACO MultiDrain CFD components Down pipe connectors CFD075 downpipe connector grey n/a CFD0100 downpipe connector grey n/a Kerb outlet profiles CFD kerb outlet half batter grey n/a CFD kerb outlet bull nose grey n/a CFD 075 downpipe connector CFD 0100 downpipe connector CFD Kerb outlet half batter CFD Bull - nose kerb outlet 268 Pricing information at:

31 ACO S Range Channel Drains General description ACO S Range is a heavy duty channel and grating drainage system available in a range of sizes and sloping and level inverts. The system is manufactured from Vienite ; ACO s high strength polymeric based recycled material, which provides a strong and robust channel design and also provides excellent chemical resistance. ACO S Range channels are equipped with cast-in ductile iron edge rails, for strength in demanding heavy-duty applications. The system is certified to BS EN 1433: 2002 Load Class F 900. The two-piece design uses heavy-duty gratings with eight bolts per metre to attach the channel to the grating. Suitable for a wide range of applications including industrial yards, dockside and airports Traditional channel and grate solution for heavy duty applications Pre-sloped and level invert units available Range of accessories including sump units and gullies for quick and simple connections to underground drainage Resin concrete construction offers excellent chemical resistance S Range S Range installed ACO S Range Hydraulics Suary Max Area m² Product Channel Channel Type Height () Run of 20m Run of 30m Run of 50m S100 S S S S S * S * 970* 895* * 1415* 1305* * 1900* 1770* S * 2375* 2230* S * Flows will require a 160 outlet or universal gully. Flows will require at least 200 outlet, and possibly two gully units. Pricing information at: 269

32 S100 Channels - sloping invert S100 Channels () no. () S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / S / / Pricing information at:

33 Connection Availability Knockout Sump Gully Closing Outlet Inlet Step Union Unit Endcap Endcap Endcap Connector /602/607 S /602/607 S /602/607 S S /602/607 S /602/607 S /602/607 S /602/607 S /602/607 S S /602/607 S /602/607 S106 S108 S /602/607 S /602/607 S /602/607 S S /602/607 S /602/607 S /602/607 S /602/607 S /602/607 S S /602/607 S /602/607 S206 S208 S /602/607 S /602/607 S /602/607 S S /602/607 S /602/607 S /602/607 S /602/607 S /602/607 S S /602/607 S /602/607 S306 S308 S309 - Pricing information at: 271

34 S100 Channels - Level () no. Bore S S05* S010* S110J* S020* S120J S030* S130J* * These level invert channels have a vertical Ø110 knockout J indicates availability of side junction for 90 bends Level invert channels can be inserted to extend a run. S100 Endcaps () no. Bore () Closing S S S Outlet S S S Inlet S S S Closing endcaps Outlet endcaps Inlet endcaps NB: These products are subject to weight and dimensional tolerances. The dimensions shown on this page are for guidance purposes only. 272 Pricing information at:

35 Connection Availability Knockout Gully Closing Outlet Inlet Step () Union Sump Unit Endcap Endcap Endcap Connector / /602/607 S /821 S /602/607 S /821 S /602/607 S106 S108 S /821 S /602/607 S106 S108 S /821 S /602/607 S206 S208 S /821 S /602/607 S206 S208 S /821 S /602/607 S306 S308 S /821 S /602/607 S306 S308 S309 - S100 Step Connectors () no. Bore () 60 step S S100 No S900 Universal Sump Unit 500 1g 0 () no. Bore () Sump unit and polypropylene bucket assembly S S100 Foul Air Traps 0 () no. Bore () No 920 foul air trap PVCu OD No 922 foul air trap PVCu OD No 940 roddable foul air trap MDPE OD No 950 roddable foul air trap MDPE OD NB: Foul air traps are for use with S900 universal sump units. Pricing information at: 273

36 S100 Drain Unions 0 () no. Bore () 820 PVC-U Ø oval to round PVC-U 110/Ø PVC-U Ø Drain union PVC-U Ø Drain union oval to round PVC-U Ø110/Ø Drain union PVC-U Ø160 S150 Channels - Level () no. Bore S * S * S * S J* S J* Ø160 knockout Pricing information at:

37 S100 Gratings - load class F () no. () Slotted heavy duty ductile iron. Ref Heelguard heavy duty ductile iron ref Intercept heavy duty ductile iron ref Solid cover ductile iron ref Slotted heavy duty ductile iron grating Heelguard heavy duty ductile iron grating Intercept heavy duty ductile iron grating Solid cover ductile iron Connection Availability Knockout Gully Closing Outlet Inlet Step () Union Sump Unit Endcap Endcap Endcap Connector /602/ /602/ /602/ /602/ /602/ * These level invert channels have a vertical Ø160 knockout Locking bolts included J indicates availability of side junction for 90 bends. Pricing information at: 275

38 S150 Endcaps () no. Bore () Closing S150* Outlet S S S Ø S150 Step Connectors () no. Bore () 50 step S200 Channels - Level Complete with Class F Grating () no. Bore S * S J* S200 Endcaps () Ø160 knockout no. Bore () Closing S Outlet S200 Ø * All level invert channels have a vertical Ø160 knockout J Indicates availability of side junction for 90 bends Can be cut on site to suit invert depths 276 Pricing information at:

39 S150 Sump Units 0 () no. Bore () Assembly top and base Raising piece Ø160 knockout (Ø200 on opposite side, invert 260) Ø S150 Drain Union and Foul Air Trap 0 () no. Bore () 822 drain union PVC-U Ø drain union PVC-U Ø foul air trap PVC-U Ø varies Drain union PVC-U Ø Drain union PVC-U Ø Foul air trap PVC-U Ø160 * Can be cut on site to suit invert depths Discharge from top and base assembly 50L/S Connection Availability Knockout Gully Closing Outlet Inlet () Union Unit Endcap Endcap Endcap /602/ /602/ Ø160 knockout Ø160 knockout S200 Drain Union 0 () no. Bore () 822 drain union PVC-U Ø Drain union PVC-U Ø Drain union PVC-U Ø Foul air trap PVC-U Ø160 Pricing information at: 277

40 Universal Gully Units for S100, S150, S200 () no. *** *** Clear opening () 601* x x ** x x ** x x connector Ø *with sediment bucket ** without sediment bucket S300 Channels - Level Complete with Class F Grating () no. Bore S * S J* S300 Gully Units () no. Bore Channel Gully top* Shallow base unit Deep base unit Raising Piece * With base outlet 278 Pricing information at:

41 S300 Drain Union and Foul Air Traps 0 () no. Bore () 822 drain union PVC-U Ø drain union PVC-U Ø foul air trap PVC-U Ø varies S300 Endcaps () no. Bore () Closing S Outlet S300 Ø Ø Drain union PVC-U Ø Drain union PVC-U Ø Foul air trap PVC-U Ø160 Connection Availability Knockout Gully Closing Outlet Inlet () Union Unit Endcap Endcap Endcap /602/ /602/ Ø200 Knockout Ø200 Knockout * All level invert channels have a vertical Ø200 knockout J Indicates availability of side junction for 90 bends Connection Availability Knockout Gully Closing Outlet Inlet () Union Unit Endcap Endcap Endcap / / For drawings/dimensions see next page Pricing information at: 279

42 S300 Gully Units continued Gully top Ø160 Ø160 Knockout 1 Shallow base 2 Raising piece 520 Ø Deep base 4 Ø160 s Pricing information at:

43 ACO KerbDrain ACO KerbDrain installed. ACO KerbDrain installed. ACO KerbDrain. ACO KerbDrain is an award-winning one-piece combined kerb and drainage system ideal for use in highway, car parking and Sustainable Drainage System applications. Manufactured from Vienite, ACO s high strength polymeric based recycled material; ACO KerbDrain is strong and durable yet lighter in weight than traditional concrete kerbs. Depending on your requirements, the system has units which comply fully with the HSE manual handling regulation and components which provide the optimum solution for mechanical installations. ACO KerbDrain now carries the BSI Kitemark to ensure full compliance for motorways and major truck roads. The system complies fully with the specification for Highways Works, Clause 516 which mandates Load Class D 400 for combined kerb and drainage products. Based on traditional HB1 and HB2 kerb stone profiles, the system is available in a selection of depths, ACO KerbDrain 480 for 480 depth installations, ACO KerbDrain 305 for 305 depths, and ACO KerbDrain 255 will suit shallow depths of 255. A range of splay kerbs are also available at depths of 280 and 480. ACO KerbDrain is suitable for new and renovation projects and has a full range of product accessories to provide a comprehensive solution for highway drainage. The system complies fully with the Specification for Highway Works, Clause 516 which mandates load class D400 for combined kerb and drainage systems. Pricing information at: 281