Passive Fire Protection

Transcription

1 Firestopping Passive Fire Protection

2 FS20 Firestop Compound 6 hour fire rated penetration seals for electrical and mechanical services

3 FS20 Firestop Compound FS20 Firestop Compound is a Fire-Rated Penetration Seal It is a dry mortar mix with a controlled swelling effect to provide a non-shrink homogeneous and smoke gas-tight fire seal. Has Fire-Ratings up to 6 hours Has applications for cables, pipes and ductwork Can be utilized as a structural mortar Easily applied by pump, Trowel or hand Covers large penetration sizes Easy retrofitting of cables

4 FS20 Firestop Compound No permanent formwork required for smaller penetrations No sealant required after cure Large packaging 22kg 2 hours 75mm thickness 3.15 Bags / m2 3-6 hours 100mm thickness 4.2 Bags / m2

5 Notable FS20 Approvals Firestopping IFC Approved BS476, Part 22 2 hours 75mm BS476, Part hours 100mm AS1530, Part 4 2 hours 75mm AS1530, Part hours 100mm Acoustic 50mm 39dB Acoustic 100mm 46dB Acoustic 150mm 51dB

6 Sizes and Ratings Firestopping Non-Structural Applications

7 Sizes and Ratings Firestopping Structural Standard reinforcement can be Applications placed in the placed in the penetration to make it a fire rated Structual penetration seal

8 FS21 Firestop Panel 4 hour fire rated penetration seals for electrical and mechanical services

9 FS21 Firestop Panel FS21 Firestop Panel is a Fire-Rated Penetration Seal FS21 Firestop Panel consist of High Density Rockwool and FS15 / FS23A Has Fire-Ratings up to 4 hours Consists of single coated Panel Has applications for cables, pipes and ductwork Is water and Weather resistant Has mechanical resistance Large penetration sizes Easy retrofitting of cables

10 Notable FS21 Approvals Firestopping IFC Approved BS 476, Part 20 4 hours BS 476, Part 22 4 hours AS1530, Part 4 2 hours 75mm AS1530, Part hours 100mm

11 Sizes and Ratings Firestopping Non-Structural Applications

12 Types of Applications Firestopping

13 Application of FS21 Firestop Panel Firestopping Friction fit only required Slots into opening around cable trays FS23A Sealant applied at joins, cable trays and substrate (as glue) FS21 Panels 1200 x 600 x 50mm (pre-coated) Angle fixture at slab base for larger penetrations

14 FS22 Firestop Pillows 4 hour fire rated expanding Pillows for cable penetrations

15 FS22 Firestop Pillows Expanding pillows for cable penetrations Pillows consist of a tightly woven fire proof bag and contents Has Fire-Rating up to 4 hours Expands up to 45% under fire Has applications for cables, pipes and ductwork Water and Weather resistant Dust free No sealant required around the pillows Flexible Perfect for high traffic penetrations Easy retrofitting of cables

16 FS22 Firestop Pillows Up to 4-hour fire rating for multiple cables 50mm, 100mm, 150mm and 200mm widths Cost effective quick installation Dust free and no sealant required Can reduce Insurance Premiums due to lowering the fire risk

17 FS22 Firestop Pillows Firestopping FS22 Firestop Pillows not only have a fire proof bag, but also contain ceramic fillers which bonds together under fire. 130 o C (266 o F) Glueing effect 280 o C (536 o F) Expanding effect (45%) 800 o C (1475 o F) Ceramic effect (hardening to ceramic block)

18 FS22 Firestop Pillow Approvals IFC Approved BS476, Part 20 4 hours BS EN hours AS1530, Part 4 4 hours

19 FS23 Intumescent Sealant 2 hour fire rated High Expansion Intumescent Sealant for electrical cable and pipe penetrations

20 FS23 Intumescent Sealant FS23 Intumescent Sealant is a high expansion, durable and flexible, one component water based fire rated intumescent sealant. Has Fire-Rating up to 2 hours Expands under fire Has applications for cables, Steel, copper and plastic pipes Water and Weather resistant Packaged in 310ml Cartridges Colour: Dark Grey

21 FS23 Intumescent Sealant Firestopping Clean and wet substrate Standard Applicator required Installed at 40mm 75mm thickness Mineral wool used for backing (FS21)

22 FS23 Approvals Firestopping IFC Approved BS476, Part 20 2 hours BS EN hours AS1530, Part 4 2 hours

23 FS23A Intumescent Sealant 4 hour fire rated Intumescent Sealant for joints and electrical cable / pipe penetrations

24 FS23A Intumescent Sealant FS23A Intumescent Sealant is a durable and flexible, one component water based fire rated intumescent sealant. Has Fire-Rating up to 4 hours Expands under fire Has applications for cables, Steel, copper and plastic pipes and joints Water and Weather resistant Packaged in 310ml Cartridges Standard Applicator required Installed at 10mm 20mm depth PE Backing Foam Also used in conjunction with FS21

25 FS23A Approvals Firestopping IFC Approved BS476, Part 20 & 22 4 hours BS EN hours AS1530, Part 4 4 hours

26 FS24 Firestop Collars 4 hour fire rated Pipe Collars for pipe penetrations

27 FS24 Firestop Collars FS24 Firestop Collars suitable for plastic pipe 30mm to 200mm Dia. Has Fire-Rating up to 4 hours Suitable for sealing PVC, UPVC, CPVC, PP, HDPE, MDPE, PE Plastic pipes Large annular gaps filled with FS23 HE Intumescent Sealant Simple to install Colour Red for ease of identification Collar is placed fush to the wall or underside of floor Securely fastened with Fire resistant screws 1 collar required for underside of floor 1 collar either side of wall

28 FS24 Approvals Firestopping IFC Approved BS476, Part 20 4 hours BS EN hours AS1530, Part 4 4 hours