Solenoid valves 2/2-way direct-operated Type EV210A



Similar documents
Assisted lift operated 2/2-way solenoid valves Type EV250B

3/2-way Solenoid Valve, direct-acting, NC or NO

Solenoid valves Type EVU

4 Posiflow Proportional Solenoid Valves

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES

3/2-way Mini Solenoid Valve

STC 3S A Series Solenoid Valves

2/2 and 3/2 Way Size 6 Seat Valves

System 8. ü ( System 8

Thermostatic valve Type AVTA

servo-controlled 3-WaY vacuum solenoid valves WiTH

MAKING MODERN LIVING POSSIBLE. Thermostatic valve AVTA. Technical brochure

3/2- and 2/2-way cartridge valve type BVE

How To Use A Flowmeter

Plastic tube flowmeters Series PT/PS

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to PSI : 10 to 24

Custom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.

Proportional pressure regulators VPPE

STC 2P050 Series Solenoid Valves NSF Compliant Materials, 2 Way, Direct Acting

Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)

Thermostatic element RAVV for 2-way valves

OEM Pressure Transmitters for heavy-duty applications, Type MBS 1200 and MBS 1250

E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51

Fluid. Flu. Fluid Fluid. uid Power d Power P. Fluid Power P. Fluid Power. Fluid Power Power. d Power. Directional Cetop Valves DCV 03.

Cable Plug acc. to DIN EN , Form A

Vacuum Gate Valve DN 100 and DN 150

Digital inductive conductivity transmitter

Electrically operated valves Series M-05, 3/2-, 5/2- and 5/3-way G1/8 650 and 750 Nl/min (0.661 and Cv)

% ^ ) 0.55 W Low Power Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies 1/4" to 1" NPT. 2/2 3/2 4/2 5/2 5/3 SERIES Low Power

Series 8146/5-V37 and Series 8150/5-V37

TA-FUS1ON. Fully adjustable Kvs control and balancing valves. That s just two good.

3/2-way pneumatic cartridge solenoid valve

DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS

Compact pressure switch Flameproof enclosure Ex d Model PCA

Pressure transmitter For general industrial applications Model A-10

Single sub-base valve

Data sheet ECC 12 and 22

kymanual or Automatic - it s your Choice

SOLENOID VALVES AND PNEUMATIC VALVES

3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

Control- and feedback head for integrated mounting on Robolux valves Type 2036

Type 3353 Angle Seat Valve

4/2-Way Pneumatic Solenoid Valve

Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange

CG PTFE Diaphragm Liquid Transfer Pump

SITRANS F flowmeters SITRANS F M

Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)

UM/ /2 & 5/3 valves, solenoid and pilot actuated ISO , ISO size 1, 2, 3 & 4 Sub-base mounted

Temperature sensor with integrated transmitter for industrial applications, MBT 3560

Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)

Automatic Bypass Control AVDO

Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC

Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP

CALEFFI. Compact automatic flow rate regulator with polymer cartridge. 127 series 01166/09 GB

RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007

Check Valves & Actuated Valves

Turbine Flow Sensor Series VTR

UM/ /2 or 5/3 Solenoid and air pilot actuated soft spool valves

Typical Aluminum GFM Mass Flow Meter

How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)

Valves. Sub-Base Mounted Valves to ISO 5599/2

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

DRYPOINT AC HP PREMIUM HIGH-PRESSURE DRYING

Thermostatic Sensor RAS-C² with RA-FN Radiator Valve (Fixed Capacity)

Self-operated Temperature Regulators Temperature Regulator Type 1u

Stainless Steel Valves For the Sanitary Industries

Pneumatic actuators The Original! Technics of the top class.

Morrison Bros. Co. General Product Specifications

Cartridge Valves. Solenoid Valves. Vickers. Screw-in Cartridge Valves. Maximum Pressure 210 bar (3000 psi) Maximum Flow 227 l/min (60 USgpm)

3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve

INLINE SD-PUMPS WITH IEC-STANDARD MOTOR

Thermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)

Variable Area Flowmeters

Fast closing valve Series 75

3 Port Solenoid Valve

GAS VALVE USER MANUAL

Pressure monitoring equipment for oil-sf 6. bushings, type GOEK

Thermostatic expansion valves type TR6 REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Valve systems Base plates, according to standard ISO Brochure

MFP14, MFP14S and MFP14SS Automatic Pumps

Control block EDD Modular Directional Valve

ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.

79 GAUGE / THERMOMETER H N O

solenoid valves SV Series 2- and 3-way Solenoid Valves for Gas and Liquid

SQUARE D INDUSTRIAL CONTROL PRODUCTS

Outdoor 33.6W Dual Port Passive Power-over-Ethernet Midspan For External Security Cameras and Wireless Access Points

2/2 & 3/2 Solenoid operated valves

3/2 Solenoid Cartridge Valve, Size 6

QLM and QLD Series Three-port Control Valves

M A N U A L

Electro-pneumatic control valves

Relative and absolute pressure switch type 529

Product data sheet. JUMO MIDAS Pressure Transmitter. Sales No. Order code JUMO AS /

WELCOME TO MAGNATROL

BERMAD Waterworks. Quick Active Check Valve. 700 Series. Model 740Q. Features and Benefits. Major Additional Features

Unit 24: Applications of Pneumatics and Hydraulics

API Flanged Safety Relief Valves Series 526 CATALOG

Transcription:

Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral media K v value up to 0.26 m 3 /h Differential pressure: Up to 30 bar Viscosity: Up to 20 cst Ambient temperature: Up to +50 C Coil enclosure: Up to IP 65 Thread connections: G ⅛ and G ¼ The valves can be used for rough vacuum Technical data for NC and NO Installation Optional, but vertical solenoid system is recommended Pressure range test pressure Tightness Time to open and close Ambient temperature Medium temperature Viscosity Materials 0 to 30 bar 50 bar Internally: Better than 8.3 x 10-2 mbar l/sec (5 ccm air per min) Externally: Better than 1 x 10-3 mbar l/sec (100% He) 7-10 ms (depending on pressure, and viscosity) +50 o C EPDM: -30 to +120 o C FKM: -10 to +100 o C 20 cst Valve body: Brass,... W.no. 2.0401 Armature: Stainless Steel, W. no. 1.4016/AISI 430 Armature tube: Stainless Steel, W. no. 1.4303/AISI 305 Armature stop: Stainless Steel, W. no. 1.4016/AISI 430 Spring: Stainless Steel, W. no. 1.4310/AISI 301 Valve orifice: Stainless Steel, W. no. 1.4305/AISI 303 O-rings/valve plate: EPDM or FKM I N D U S T R I A L C O N T R O L S IC.PD.100.A1.02 520B1847

Function NC Coil voltage disconnected (closed): When the voltage is disconnected, the armature (2) with the valve plate (3) is pressed down against the valve orifice (4) by the closing spring (1) and the medium s pressure. The valve will be closed for as long as the voltage to the is disconnected. 1.Closing spring 2.Armature 3.Valve plate 4.Valve orifice 5.Coil Coil voltage connected (open): When voltage is applied to the (5), the armature (2) with the valve plate (3) is lifted clear of the valve orifice (4). The valve is now open for unimpeded flow and will be open for as long as there is voltage to the. Dimensions and weight Bottom view Thread ISO 228/1 L Coil type AB/AC B Coil type AM/AK H A Weight without [kg] G ⅛ 26 22 33 54 13 0.085 G ¼ 35 22 33 59 17.5 0.110 2 IC.PD.100.A1.02

Ordering NC valve body Connection ISO 228/1 k v - Value [m 3 /h] Seal material Orifice Media temp. Type designation Permissible differential pressure [bar] 2) Suitable Water Oil Air type Main type Specification ac dc ac dc ac dc Code no. without 30 17.5 28 16 30 19 AB 30 24 30 24 30 24 AC G 1/8 0.04 1.2 0 EPDM -30 +120 EV210A 1.2B G 18E NC000 30 24 30 24 30 24 AM 032H8000 1) FKM -10 +100 EV210A 1.2B G 18F NC000-24 - 24-24 AK 032H8001 18 9.5 15 8 22 10.5 AB 26 17.5 24 16 30 18.5 AC G 1/8 0.08 1.5 0 EPDM -30 +120 EV210A 1.5B G 18E NC000 28 22.5 26 19 30 24 AM 032H8002 1) FKM -10 +100 EV210A 1.5B G 18F NC000-17.5-17.5-19 AK 032H8003 11 5.5 9 5 14 6 AB 18 10.5 16 9.5 22 11 AC G 1/8 0.11 2.0 0 EPDM -30 +120 EV210A 2.0B G 18E NC000 23 18.5 22 17 30 24 AM 032H8004 1) FKM -10 +100 EV210A 2.0B G 18F NC000-9 - 9-9 AK 032H8005 6 3 5 2.5 8 3 AB 11 5.5 9 5 12 6 AC G 1/8 0.17 2.5 0 EPDM -30 +120 EV210A 2.5B G 18E NC000 17 13 16 12 20 14.5 AM 032H8006 1) FKM -10 +100 EV210A 2.5B G 18F NC000-5 - 5-5 AK 032H8007 4 1.5 3 1.5 5 2 AB 7 3.5 6 3 8 3.5 AC G 1/8 0.22 3.0 0 EPDM -30 +120 EV210A 3.0B G 18E NC000 13 9 12 8 14 9 AM 032H8008 1) FKM -10 +100 EV210A 3.0B G 18F NC000-3 - 3-3 AK 032H8009 6 3 5 2.5 8 3 AB 11 5.5 9 5 12 6 AC G 1/4 0.17 2.5 0 EPDM -30 +120 EV210A 2.5B G 14E NC000 17 13 16 12 20 14.5 AM 032H8014 1) FKM -10 +100 EV210A 2.5B G 14F NC000-5 - 5-5 AK 032H8015 4 1.5 3 1.5 5 2 AB 7 3.5 6 3 8 3.5 AC G1/4 0.22 3.0 0 EPDM -30 +120 EV210A 3.0B G 14E NC000 13 9 12 8 14 9 AM 032H8016 1) FKM -10 +100 EV210A 3.0B G 14F NC000 3-3 - 3 - AK 032H8017 2.8 1.2 2 0.8 3.5 1.2 AB 5 2.5 4 2.5 5.5 2.5 AC G 1/4 0.26 3.5 0 EPDM -30 +120 EV210A 3.5B G 14E NC000 11 6 10 5.5 11 6 AM 032H8018 1) FKM -10 +100 EV210A 3.5B G 14F NC000-1.5-1.5-1.5 AK 032H8019 1) WRAS approved 2) Pressure range can be extended for use in rough vacuum, typically up to 99% vacuum (10 mbar), depending on the application IC.PD.100.A1.02 3

Function NO Coil voltage disconnected (open): When the voltage to the is disconnected, the valve orifice (6) is open, the opening spring (3) pressing the valve plate (7) clear of the orifice (6) via the armature (4) and the pins (5). The valve will be open for as long as the supply voltage is disconnected. 1.Coil 2.Fixed top 3.Opening spring 4.Armature 5.Pins 6.Valve orifice 7.Valve plate 8.Closing spring Coil voltage connected (closed): When voltage is applied to the, the armature (4) is drawn up to touch the fixed top (2). The valve plate (7) is pressed against the valve orifice (6) by the closing spring (8). The valve will be closed for as long as there is voltage to the. Ordering NO Connection ISO 228/1 Seal material 1) k v - Value [m 3 /h] Orifice valve body Media temp. Type designation Permissible differential pressure [bar] 2) Suitable Water Oil Air type Main type Specification ac dc ac dc ac dc Code no. without FKM 0.06 1.5-10 +100 EV210A 1.5B G 18F NO000 30 16 24 13 30 16 AM 032H8049 FKM 0.12 2.0-10 +100 EV210A 2.0B G 18F NO000 14 10 11 8 14 10 AM 032H8051 G 1/8 FKM 0.15 2.5-10 +100 EV210A 2.5B G 18F NO000 0 10 6 8 4.5 10 6 AM 032H8053 FKM 0.18 3.0-10 +100 EV210A 3.0B G 18F NO000 6 4 5 3 6 4 AM 032H8055 FKM 0.20 3.5-10 +100 EV210A 3.5B G 18F NO000 4 3 4 2 4 3 AM 032H8057 1)For WRAS approved seal material in EPDM, please contact Danfoss. 2) Pressure range can be extended for use in rough vacuum, typically up to 99% vacuum (10 mbar), depending on the application Dimensions and weight Thread ISO 228/1 4 IC.PD.100.A1.02 L B Coil type AM H Weight without [kg] G ⅛ 26 33 63 0.125

Features EV210A SS Very compact valves for industrial application, such as control For neutral and aggressive liquids and gases. Contact Danfoss if you are in doubt about the valve s suitability for the medium in question. Differential pressure: Up to 30 bar Viscosity: Up to 20 cst Ambient temperature: Up to +50 C Coil enclosure: Up to IP 65 Thread connections: G ⅛ and G ¼ The valves can be used for rough vacuum Technical data Installation Pressure range test pressure Tightness Time to open and close Ambient temperature Medium temperature Viscosity Materials Optional, but vertical solenoid system is recommended 0 to 30 bar 50 bar Internally: Better than 8.3 x 10-2 mbar l/sec (5 ccm air per min) Externally: Better than 1 x 10-3 mbar l/sec (100% He) 7-10 ms (depending on pressure, and viscosity) +50 o C FKM: -10 to +100 o C 20 cst Valve body: Stainless Steel, W.no. 1.4305/AISI 303 Armature: Stainless Steel, W. no. 1.4016/AISI 430 Armature tube: Stainless Steel, W. no. 1.4303/AISI 305 Armature stop: Stainless Steel, W. no. 1.4016/AISI 430 Spring: Stainless Steel, W. no. 1.4310/AISI 301 Valve orifice: Stainless Steel, W. no. 1.4305/AISI 303 O-rings/valve plate: FKM Dimensions and weight Bottom view Thread ISO 228/1 L Coil type AB/AC B Coil type AM/AK H A Weight without [kg] G ⅛ 26 22 33 54 13 0.085 G ¼ 35 22 33 59 17.5 0.110 IC.PD.100.A1.02 5

Ordering valve body Connection ISO 228/1 Seal material 1) k v - Value [m 3 /h] Orifice Media temp. Type designation Permissible differential pressure [bar] 2) Suitable Máx. Water Oil Air type Main type Specification ac dc ac dc ac dc Code no. without 30 17.5 28 16 30 19 AB FKM 0.04 1.2-10 +100 EV210A 1.2SS G 18F NC000 30 24 30 24 30 24 AC 30 24 30 24 30 24 AM 032H8025-24 - 24-24 AK 18 9.5 15 8 22 10.5 AB FKM 0.08 1.5-10 +100 EV210A 1.2SS G 18F NC000 26 17.5 24 16 30 18.5 AC 28 22.5 26 19 30 24 AM 032H8027-17.5-17.5-19 AK 11 5.5 9 5 14 6 AB G 1/8 FKM 0.11 2.0-10 +100 EV210A 2.0SS G 18F NC000 18 10.5 16 9.5 22 11 AC 23 18.5 22 17 30 24 AM 032H8029-9 - 9-9 AK 6 3 5 2.5 8 3 AB FKM 0.17 2.5-10 +100 EV210A 2.5SS G 18F NC000 11 5.5 9 5 12 6 AC 17 13 16 12 20 14.5 AM 032H8031 0-5 - 5-5 AK 4 1.5 3 1.5 5 2 AB FKM 0.22 3.0-10 +100 EV210A 3.0SS G 18F NC000 7 3.5 6 3 8 3.5 AC 13 9 12 8 14 9 AM 032H8033-3 - 3-3 AK 6 3 5 2.5 8 3 AB FKM 0.17 2.5-10 +100 EV210A 2.5SS G 14F NC000 11 5.5 9 5 12 6 AC 17 13 16 12 20 14.5 AM 032H8039-5 - 5-5 AK 4 1.5 3 1.5 5 2 AB G 1/4 FKM 0.22 3.0-10 +100 EV210A 3.0SS G 14F NC000 7 3.5 6 3 8 3.5 AC 13 9 12 8 14 9 AM 032H8041 3-3 - 3 AK 2.8 1.2 2 0.8 3.5 1.2 AB FKM 0.26 3.5-10 +100 EV210A 3.5SS G 14F NC000 5 2.5 4 2.5 5.5 2.5 AC 11 6 10 5.5 11 6 AM 032H8043-1.5-1.5-1.5 AK 1) For WRAS approved seal material in EPDM, please contact Danfoss 2) Pressure range can be extended for use in rough vacuum, typically up to 99% vacuum (10 mbar), depending on the application 6 IC.PD.100.A1.02

Coil options Type AB: 4.5W ac / 5 W dc Type AC: 7.0 W ac/ 10W dc Type AM: 7.5W ac / 9.5 W dc Type AK: 3.0 W dc Ordering s See separate data sheet for s DKACV.PD.600.A Media resistance Please contact Danfoss IC.PD.100.A1.02 7

Spare parts EV210A NC 7 The spare parts set comprises the following parts: 1) Armature tube 2) Armature with valve plate and spring 3) Flange 4) Disk 5) O-ring 6) Nut 7) 2 screws for connecting tube to valve body Seal material EPDM FKM Code No. 042U0067 042U0068 IC.PD.100.A1.02 Danfoss A/S 11 2004 IC-MC/frz

2026 © DocPlayer.net Privacy Policy | Terms of Service | Feedback  | Do Not Sell My Personal Information