This document describes how to set up Pine using the UMCE Login Service to access your Exchange email account. 1. Use SSH software to connect to the Login Service (login.itd.umich.edu). At the Unix prompt, type pine. From the Main Menu select SETUP Page 1 of 16 UNIXpineSetup2 Revised 3/19/08
2. From the SETUP screen select Config 3. Move to the first field personal-name and hit the enter key or select the Change Val option. 4. On the input line enter the full name of the user To accept the entry press the Enter key. Page 2 of 16 UNIXpineSetup2 Revised 3/19/08
5. Move to the next field user-domain Select the Change Val option 6. Enter the value umich.edu on the entry line (This may already be entered) To accept the entry hit the Enter key. Page 3 of 16 UNIXpineSetup2 Revised 3/19/08
7. Move to the field for inbox-path Select the Change Val option These settings have changed as of March 19, 2008. There are 2 ways to setup Pine. The first method uses GSSAPI and Kerberos pass-thru authentication. This requires that you logon to the login.itd.umich.edu server using your U-M Kerberos credentials AND that your Exchange mailbox is configured to use your UMROOT\uniqname user account. This will not work if your Exchange mailbox is configured with an ENGIN/uniqname user account. The second method is similar to how you used to be able to configure Pine with Exchange and will work with both ENGIN and UMROOT user accounts. The method uses Basic Authentication over SSL and will require a second logon to Active Directory Page 4 of 16 UNIXpineSetup2 Revised 3/19/08
8. Setup Method 1 GSSAPI a. Enter the value its-ecas-01.adsroot.its.umich.edu/ssl/novalidate-cert To accept the entry press the Enter key. ( its is itcs in 2007) Page 5 of 16 UNIXpineSetup2 Revised 3/19/08
b. On this screen select the default for the INBOX. To accept the entry, hit the Enter key. c. From this screen select Exit Setup. Page 6 of 16 UNIXpineSetup2 Revised 3/19/08
d. From this screen select Yes if you want to accept the changes you have made to the configuration. e. Select Quit. Page 7 of 16 UNIXpineSetup2 Revised 3/19/08
f. Logging on to Pine using GSSAPI Connect to login.itd.umich.edu with an SSH Client. Type pine at the prompt. g. You will NOT be prompted for a username or password, but Pine will use the username and password you connected to the login.itd.umich.edu server. 9. Setup Method 2 Basic Authentication over SSL (Use for Engin user accounts). a. Connect to login.itd.umich.edu with an SSH Client. b. Edit the.pinerc configuration file using pico or another editor to disable GSSAPI: disable-these-authenticators=gssapi c. In the Pine Setup Configuration, edit the inbox-path: Enter the value exchange.umich.edu/ssl. To accept, press the Enter key. On the next screen select the default for the INBOX. To accept the entry, hit the Enter key. Press E to exit Setup Page 8 of 16 UNIXpineSetup2 Revised 3/19/08
Press Q to exit Pine d. Logging on to Pine using Basic Authentication Connect to login.itd.umich.edu with an SSH Client. Type pine at the prompt. Page 9 of 16 UNIXpineSetup2 Revised 3/19/08
e. Accept default logon name or enter new logon name. If you use just the logon name, the UMROOT domain will be assumed, otherwise logon as domain\uniqname, i.e. engin\uniqname. Enter your Active Directory password for the user account. Page 10 of 16 UNIXpineSetup2 Revised 3/19/08
Viewing Folders in Pine 1. By default, Pine will only show you the top level folders you have beneath your Inbox. From the Main Menu press L to see the Exchange Folder List. To see subfolders, you will need to edit the Collection List. Page 11 of 16 UNIXpineSetup2 Revised 3/19/08
2. To edit the Collection List From the Main Menu select SETUP again Page 12 of 16 UNIXpineSetup2 Revised 3/19/08
3. Press L to configure the collectionlist (folder list) 4. Click A to add a collection Page 13 of 16 UNIXpineSetup2 Revised 3/19/08
5. Fill in the following info: ( its is itcs in 2007) Nickname: Exchange Server Folders 1 (This is just a descriptive Name) Server: its-ecas-01.adsroot.its.umich.edu/ssl Path: inbox/ View: * Press Ctrl-X to Save & Exit., Press Y to Save Changes, Press E to Exit Setup 6. If you have additional folder levels beneath the first level, you can create additional Folder Collections by pressing A again for each level as follows: Nickname: Exchange Server Folders 2 Server: its-ecas-01.adsroot.its.umich.edu/ssl Path: inbox/ View: */* Nickname: Exchange Server Folders 3 Server: its-ecas-01.adsroot.its.umich.edu/ssl Path: inbox/ View: */*/* 7. You can press D to delete unused collections such as IMAP Server and IFS home directory if you are not using them. Page 14 of 16 UNIXpineSetup2 Revised 3/19/08
8. Back in the Main Menu, select Folder List Page 15 of 16 UNIXpineSetup2 Revised 3/19/08
9. Select L to view your Folder List 10. Press Spacebar to see additional pages of folders if necessary. Page 16 of 16 UNIXpineSetup2 Revised 3/19/08