Subsea Engineering Days 2015 London 20-22 October 2015 Value propositions and contact information
4 Subsea (Only for Premier Oil, Genesis & BP) Nils Gunnar Viko - Vice President, Flexible Pipe Technology nils.gunnar.viko@4subsea.com Risk and Cost Reducing Riser Integrity Monitoring Products and Repair Solutions Aker Solutions Marco Davide Gabelloni - Business Development Manager marco.davide.gabelloni@akersolutions.com Aker Solutions is finalizing the qualification of an innovative subsea multi-phase pump (MultiBooster ) providing high differential pressure at high gas volume fractions. This is a major enabler for increased production and development of deep water fields, with a simplified production system configuration and minimum impact on topside infrastructure. We have now completed the delivery of Åsgard subsea compression trains to Statoil (start-up expected in September), providing additional 282 MMBOE of hydrocarbon production. Based on the lessons learned and test results from this project, we are developing a new simplified and compact subsea Well Stream Compression System to expand the coverage of our portfolio. ClampOn Kjetil Nysater - Area Sales Manager kjetil.nysater@clampon.com ClampOn specialize in acoustic, non-intrusive instrumentation and provides an extensive range of subsea products, mainly for permanent monitoring, but also for inspection purposes. The Subsea CEM (Corrosion-Erosion monitor) which monitors the state of pipelines is ClampOn s latest subsea product, The subsea vibration monitor has also proven to be of great value to monitor for vibration induced fatigue, both for permanent use, and also stand-alone for inspection type use.
DNV GL Ali Sisan Business Development Manager - Pipelines Ali.Sisan@dnvgl.com DNV GL, an innovation powerhouse and responsible for 170 world leading offshore standards and recommended practices, is introducing a more efficient approach to standardisation of subsea components and projects. DNV GL s new Subsea codes provide principles and technical requirements for design and manufacturing of subsea equipment and components in order to maintain safety and function in operation while removing unnecessary documentation and qualifications. Ellingsen Nor Instruments Morten Ree Business Unit Manager ree@ellingsen.biz Our focus is to make the best technical solutions and most reliable packages for subsea operations. We have references on supplying the first to ATEX BOP HPU`s to Statoil, and we are a partner for Statoil in supplying pumps and technology to Statoil first Subsea installed HPU. We can offer: - Subsea HPU`s - BOP HPU`s - TUTU Panels - Offshore Loading ROV Panels - Ballast ROV Panels - Turret Subsea Pump Packages We win our packages due to flexible total solutions for customer, and a quality package for competitive pricing. Our Value Propositions are: - Increased profitability through optimal design - Best technical solutions - System solutions designed to enhanced HSE & QA - Critical delivery time
EMAS Eric Cecil Fulford Senior Vice President Eric.Cecil.fulford@emas.com EMAS AMC is a specialized subsea installation and marine services company with differentiated assets, delivering integrated solutions to the offshore energy industry worldwide. With its broad offer of products and services EMAS AMC is well positioned to take on the most advanced and complex projects. Freudenberg Ian James Business Development Manager Ian.james@fogt.com Freudenberg Oil & Gas Technologies Vector Products design and manufacture high integrity, leak free sealing solutions for the Subsea industry. Our SPO-S Compact Flange is ideal for subsea applications where we have a full range of swivel ring flanges up to pressure class API 15,000 psi, whilst our Optima ROV Deepwater Connector is ideal for deeper water diverless applications up to pressure class API 20,000psi. Subsea applications we have supplied our SPO-S CF and Optima to include, but are not limited to subsea trees, manifolds, jumpers, PLET s & PLEMS, Risers and Flowlines (rigid and flexible). Hitec Products Lee French UK Sales Manager Lee.french@hitecproducts.no Hitec Products is a leading supplier of Electro-Hydraulic Control Systems and Chemical Injection Systems to the oil & gas industry. We have four divisions today. Subsea Systems has the following product portfolio: Workover Control Systems Hydraulic Power Units Topside Umbilical Termination Units Subsea Umbilical Termination Units UTAs Test & Flush HPUs Subsea Control Module Test Stands
IFE Tore B. Gimse, Research Director Petroleum Technology tore.gimse@ife.no Since the invention in 1980 at Institute for Energy Technology (IFE), OLGA has been the market leader in dynamic multiphase flow simulations. Since then, IFE has been developing standalone, special purpose simulator tools for individual customers, as well as state of the art experimental facilities for flow assurance research and simulator verification. The experimental facilities include laboratories serving the majority of issues in Flow Assurance, such as waxes, hydrates, CO2, viscous fluids, sand, emulsions, separation, corrosion, scale etc etc. IFE offers state of the art: Tailor made Flow Assurance studies, both experimentally and theoretically, as well as custom software development. Corrosion evaluations, and evaluation of top of line corrosion in gas pipelines with water condensation. Scale and chemistry evaluations for glycol regeneration systems. Jotun Nick Webb, ISM Manager, nick.webb@jotun.co.uk Christian Boge, Regional Sales Director ISM, christian.boge@jotun.de Jotun is a world leading manufacturer of protective coatings for offshore & subsea structures, support vessels, drilling rigs & FPSOs. As technology & equipment to explore deep-sea & remote areas evolves & more complex subsea structures are developed the demands on long term corrosion protection increase. Jotun continues to support & invest in R&D to meet the future challenges demanded by the Oil & gas Industry. Neodrill Wolfgang Mathis Technical Manager Wolfgang@neodrill.no NeoDrill's CAN technology offers a modular single and template well foundation system. The benefits include a stronger well foundation, simple an modular design (max 80 ton per element), construction vessel installed conductor and improved fatigue life-time (especially in connection with soft seabed). These factors contribute to a cost and time effective system.
Prezioso Linjebygg Tim Eley Business Developer Tim.eley@lbo.com Prezioso Linjebygg - Subsea Tools & Techniques in the Splash Zone - Where Divers & ROV's Fear to Go! Many subsea companies operate quite happily in deepwater, on subsea pipelines and seabed infrastructure with ROV s and specialist tooling. However, these same companies struggle to provide services on structures in the so called Splash Zone sea level to minus +/- 20 meters or more. Prezioso Linjebygg has specialist access tools, matched with a Schilling robotic arm - that allows ROV type tooling using standard ROV tools, to cut, bolt, clean, inspect, video and NDT test -using sensor such as acfm inspection of welds etc. The key to operations in the splash zone is to provide a stable platform or base from which to operate ROV tooling something that ROV s or Divers never have, as this is an area which is constantly buffeted by waves and current and sea swell conditions. Sandvik Riser Technology Frode Bjørkheim, Sales Manager Well Intervention frode.bjorkheim@sandvik.com Today, tougher operating conditions offshore are raising the bar for smarter and safer riser solutions. For well completions and interventions, the rapid-action Sandvik ClikLocTM Connector, with no loose parts or the need for tools, is a good example of added safety and operational efficiency and part of our broader portfolio. With 50 years in the oil and gas industry and 150 years in steelmaking, our tube, wire, HIP and other products are designed to help you amplify new possibilities With no loose components or make-up tools needed, this stab-in, self-entering connector eliminates the hazard of falling nuts and bolts during workover. With a rapid click and lock action it creates significant time savings. The robust connector is made of solid corrosion-resistant duplex stainless steel. Now type approval and operational, it s helping leading service and oil companies get an edge.