The Rosenberger-OSI Data-Center-Rack has been developed especially for FO patch distributors in Data Centers. In Data Centers the requirement for highest density becomes increasingly more important than in other cabling areas. To lead the through the very high density emerging large cable volumes professional and appropriate away from the patch fields, new cable management solutions are needed. The Rosenberger-OSI Cable-Management-System is the solution! It enables perfect, FO suitable cable management. It is the advantage compared to cabinet/rack systems from other manufacturers! Details see at the following pages. Page 1 of 10
With innovative FO connectivity systems like the MU-Duplex-Horizontal (Mini SC- Duplex) you even can patch Ultra-High-Density 288 channels = 576 fibers at 6HU just with your fingers, no special tool is needed. The Rosenberger-OSI Cable-Management-System for perfect, FO suitable professional and appropriate cable management of the large cable volumes of patch fields with very high densities. More Details see at the following pages. Vertical-Cable- Manager right Vertical-Cable- Manager left 19 /2HU Horizontal-Cable- Manager Page 2 of 10
Rosenberger-OSI Cable-Manager are FO suitable through: 1.) The so-called T-Fingers which are forming the Finger-Slots : They are rounded all-over, have no sharp edges. They guarantee high bending and kinking protection for the cable even under tensile load. They are very robust and break resistant. 2.) The large so-called Finger-Slots : Therein the cables have lots of space and they are neither squeezed nor kinked. T-Finger Finger-Slot Page 3 of 10
Rosenberger-OSI Cable-Manager are very installation and handling friendly through: 1.) The covers which are hinged in both directions and completely removable. 2.) The all-over rounded T-Fingers : During installation and un-installation the cables can not be damaged through sharp edges. The cables can be very easy and secure installed and un-installed in the Cable-Managers. During work with open or removed covers the T-Fingers hold the cables back inside of the Finger-Slots, the cables can not escape. 3.) The cable over-lengths are stored inside of especially suitable ducts at the rear sides of the Vertical-Cable-Managers. Details see at the following pages. hinged covers removed covers cabls are kept inside of the Finger-Slots by the T-Fingers Page 4 of 10
Rosenberger-OSI Cable-Manager are very installation and handling friendly through: 3.) The ducts to support the cable over-lengths at the rear sides of the Vertical- Cable-Managers Vertical-Cable- Manager front view There are 8 large holes between the actual Cable- Manager and the at its rear side mounted cable overlength duct for the leadthrough of the cable overlengths. The cable over-length ducts have doors with magnetic locks Page 5 of 10
The Rosenberger-OSI 19 /45HU Data-Center-Rack 800 mm deep RAL 9005 black structure matt Is a modular system based on the Base-Frame with four 45HU high 19 rails and the right and left Vertical-Cable-Manager. The Base-Frames can be screwed together to build up rows. There are side walls and punched and solid rear wall doors available. More accessories see at the following pages. Rear wall door solid left hinged OSI-P/N: 142A0001 Rear wall door solid right hinged Not shown here OSI-P/N: 142A0058 Base-Frame with right and left Vertical-Cable-Manager OSI-P/N: 142A0004 Side wall left OSI-P/N: 142A0002 Cabel protector OSI-P/N: 142A0054 19 /2HU Horizontal-Cable-Manager OSI-P/N: 111A0451 Side wall right OSI-P/N: 142A0003 Page 6 of 10
The Rosenberger-OSI 19 /45HE Data-Center-Rack 800 mm deep Dimensions [mm]: front view side view from left top view Inside of this square the roof is punched with fine holes and has removable perforations over the Vertical-Cable-Managers, to lead cables through the roof. Base-Frame row matrix Page 7 of 10
The Rosenberger-OSI 19 /45HE Data-Center-Rack 800 mm deep Material and delivery form: 1.) Base-Frame, side walls, rear wall door and cable protector: Steel powder coated RAL 9005 black structure matt 2.) Cable-Managers: - Body and cover aluminium powder coated RAL 9005 black structure matt - T-Fingers plastic PC/ABS RAL 9005 black, flameability UL94-V0, halogen-free - Cable over-length ducts steel powder coated RAL 9005 black structure matt 1 1 Labeling field 30 x 120 mm for mounting at the roof edge is included. 1 2 Grounding cable for grounding of the attachment parts (e.g. side walls) at the Base-Frame are included in the attachment parts. Delivery form: The Base-Frame is delivered standing at a pallet mounted with the attachment parts (e.g. side walls) you must order separate.!!! Total height with pallet = 2240 mm doesn`t fit into all elevators and through all doors. The 19 /2HU Horizontal-Cable-Managers and the accessories from the next pages are not mounted. Our 19 /45HU Data-Center-Rack is also 1000 mm deep deliverable on request. Page 8 of 10
Accessories and options: 19 (482mm) C-Rail Steel zinc plated, appropriate for the T-root cable clamps below, PU = 4 pcs. Incl. Cage nuts and screws OSI-P/N: 142A0500 Cable clamps (type T-root) appropriate for the C-Rail above, steel zinc plated PU = 8 pcs. OSI-P/N: 142A0503 For cable diameter 30 to 34 mm OSI-P/N: 142A0508 For cable diameter 18 to 22 mm Cage nuts for 19 profile rails, steel zinc plated, without contacting, PU = 50 pcs. M5 = OSI-P/N: 142A0501 M6 = OSI-P/N: 142A0507 Screws with cross slot, steel zinc plated with black plastic washer PU = 100 pcs. M5 = OSI-P/N: 142A0502 M6 = OSI-P/N: 142A0506 Page 9 of 10
Accessories and options: 19 /2HU Document-Drawer steel powder coated RAL 9005 black structure matt OSI-P/N: 142A0511 Rear wall door punched steel powder coated RAL 9005 black structure matt left hinged OSI-P/N: 142A0052 right hinged OSI-P/N: 142A0059!!! Optional deliverable on request Page 10 of 10