CLM-2201/2251 Model. & Parts No. Explaination

Transcription

1 CLM-0/5 Model. & Parts No. Explaination ()Plinths ()Adjustable Depth stays 750mm Depth mm Depth ()Second pair of mountintg angle 0-75xx Finished running Depth of mounting Color for ordering Finished running Depth of mounting Color for ordering Model No. of OpenRack No. of mounting angle 750mm Depth of Plinth Height Color for of "U" ordering "U" in Height 900mm Depth 900mm Depth 9" OPEN RACK Model No. of OpenRack 0-75xx No. of mounting angle 750mm Depth of Plinth Height Color for of "U" ordering Finished of Plinth running 900mm Depth of Plinth Color for ordering Standard Accessories : Second pair of mountintg angles : Plinth: /90 Depth stays : / Finished running 900mm Depth of Plinth Color for ordering Finished running Color choose : Fill number 5, in the 5 - RAL705 - RAL90 Height of "U" Four option color RAL00,RAL90, RAL508,RAL705 as above Color for ordering 5 Model No. No. of of Mounting OpenRack angle(frame) ()Multi-function Angle () " Baying Duct "U" of Height "U" of Height 65-9 Finished running Height of "U" 885- Finished running Height of "U" () 6" Baying Duct Model No. of OpenRack 5 No. of Mounting angle(frame) "U" of Height Standard Accessories : Multi-function Angles: 65-9 " Baying Duct: 885-6" Baying Duct: Finished running Height of "U" G

2 9" Open Rack for Server & Cabling management Solutions 9" OPEN RACK CLM-5x Series CLM-0x Series

3 CLM-0/0 Open Rack Series D: 750mm D: 900mm D: 750mm D: 900mm 9" OPEN RACK CLM-0-75xx (D:750mm one pair of mounting angles) Total Unit (U) Pack No. 5 0 Total Height (H) Inner Height (B) c.h c.h Clearance Height (U)U=.5mm Included Accessories / Model No CLM NUT See page No.K9 0. CLM See page No.K 0. CLM Self-tapping Screw See page No.K 50 CLM-0-90xx (D:900mm one pair of mounting angles) c.h. 8.5 c.h c.h c.h Total Unit (U) Pack No Total Height (H) Inner Height (B) c.h c.h c.h. 8.5 c.h c.h c.h Clearance Height (U) U=.5mm Included Accessories/ Model No CLM NUT See page No.K9 0. CLM See page No.K 0. CLM Self-tapping Screw See page No.K 50 CLM-0-75xx (D:750mm two pair of mounting angles) Total Unit (U) Pack No Total Height (H) Inner Height (B) c.h.670. c.h c.h. 8.5 c.h c.h c.h Clearance Height (U) U=.5mm Included Accessories / Model No CLM Square See page No.K9 0. CLM Self-tapping Screw See page No.K 0. CLM Self-tapping Screw See page No.K 00 CLM-0-90xx (D:900mm two pair of mounting angles) Total Unit (U) Pack No Total Height (H) Inner Height (B) c.h.670. c.h c.h. 8.5 c.h c.h c.h Clearance Height (U) U=.5mm Included Accessories / Model No CLM Square See page No.K9 0. CLM Self-tapping Screw See page No.K 0. CLM Self-tapping Screw See page No.K 00 For Optional Accessories Please see page No. of G8 Color choose : Fill number 5, in the 5 - RAL705 - RAL90 G

4 CLM-0/0-75/90 9" Open Rack For NetWork Server & Cabling Management Solutions 9" OPEN RACK Model No. Description: CLM-0-75-xx one pair of mounting angles in 750mm depth. CLM-0-90-xx one pair of mounting angles in 900mm depth. CLM-0-75-xx Two pairs of mounting angles in 750mm depth. CLM-0-90-xx Two pairs of mounting angles in 900mm depth. Main Mechanism Supplied: Mounting angle: or pair of CLM-8808 for all CLM-0x Included CLM-885 Bottom crossbeam Plinth: or pair of CLM for 750mm Depth or pair of CLM for 900mm Depth Depth Stays: pair of ( pcs) CLM for CLM-0-75 pair of ( pcs) CLM for CLM-0-90 Option accessories: Castors or levelling feet or Eyebolts for more please see page No.G8 Finished: Powder coating in color RAL 705 or RAL 90 Patent Pended: Germany Taiwan 8978 Features: The basis.0 thickness Sheet Steel to combine professional stamping technical cerated The CLM OpenRack made in "U-Shaped" stiffening furrow mounting angles for a heavy load capacity Punching in 5mm pitch pattern square holes with infinity in line on two edge sides for fastening any 9" (8.6mm)NetWork components through fixing CLM-8800 cage Nuts and CLM washered screws set From Front or rear in any level in efficiency. The second pair of mounting angles to accomodate 9"(8.6mm) NetWork components,server system equipment to install Telescopic slide-rails,component shelves, and cable clamp rails on to protect all components against overlap and in no bias for moving heavy-loading capacity to extra order castors for rugged floor and permit-free location, to extra order levelling feet for durable stability. A pair of Flexible plinth (Bottom crossesbeams) based on a 50mm pitch pattem for accommodation NetWork components to save strong vibration condition. G

5 OpenRack for versatile applications! Features: The CLM-0x OpenRack is the solution for fiexible NetWorks or for sitting in distribution rooms. The basis.0 thickness Sheet Steel to combine professional stamping technical cerated "D.I.Y." Exporting The CLM OpenRack made in "U-Shaped" stiffening furrow mounting angles for a high load capacity Punching in 5mm pitch pattern square holes with infinity in line on two edge sides for package for saving long distance fastening any 9" 8.6mm)NetWork components through fixing CLM-8800 cage Nuts and Importing & transportation cost CLM washer screws set From Front or rear in any level in efficiency. For assembly in no time The CLM-0-75xx,CLM-0-90xx with a second pair of mounting angles to accomodate 9"(8.6mm)NetWork components,server system equipment to install Telescopic slide-rails, component shelves,telescopic slide rails and cable clamp rails on to protect all components against overlap and in no bias For moving heavy-loading capacity to extra order castors for rugged floor and permit-free location, to extra order levelling feet for durable stability. A pair of Flexible plinth(bottom crossesbeams)based on a 50mm pitch pattem for accommodation NetWork components to save strong vibration condition. These Rack will impress you with its versatility. Top / Bottom view Mounting angles 9" OPEN RACK Strengthened Top Crossbeams For high loading capacity. Welded stamping made of mm sheet steel. Plinth Variants Plinth/Flexible Strengthened "U" shaped stamping Guide frame assembling become to stability construct May be adjusted Depth in pitch pattern 50mm. Accurately punching on a pitch pattern in 5mm square hole in line on two sides For mounting 9" NetWork component, stability server or components. Baying Connection CLM CLM CLM Levelling Assembled feet (option) to compensate for floor irregularities. Twin castors Assembled (option) facilitate problem-free location changes. CLM-886 Fixing Baying connectors(option) C L M C L M To Fixing Levelling feet on plinth(option) C L M S To Fixing Castors on plinth(option) C L M / 8 Swelling Boom Bolt screw to Fastern on ground(option) Plinth,Durable Located on floor(standard) Baying View For assembling entire suites of patch panels G5

6 9" Open Rack for Server & Cabing Management based on CLM 0/0 Example of rack installation for predominantly active components (Optional): CLM-0-xxxx Two pair of mounting Angles OpenRack Top crossbeams and sets depth stays attached to angles. Monitor enclosure. U Fixed component shelf. Cable clamp rails in rear. U Blanking panel. U keyboard drawer with telescopic slider U Power socket strip in rear. U Vented adjustable component shelf. U Slide-in component shelf with Telescopic sliders. Castors Technical installation CLM-0-xxxx Series CLM-0-xx Series Example of rack installation for predominantly passive components:(optional) CLM-0-xxxx one pair of mounting angles OpenRack Installation of patch panels for various 9" Component coupler systems. U cable management panel for horizontal cable management. Shunting ring for cable routing. Fixed Component shelves. U blanking panel. Castors. 9" OPEN RACK One pair of mounting angles The CLM-0-XXXX standard Series with optional castors Two pair of mounting angles The CLM-0-xxxx series standard just fixing the second pair of mounting angles included depth stays onto CLM-0-xxxx series with optional castor. Patch panels 9" pitch pattern for mounting 9" components to reach a data managing in efficiencly. (see page of K~K7) CLM-8805 Twin-aim fixed component shelf for one pair of mounting angles,8.6 mm (9") Which fixed installation, component shelf is the same. For Loading a not havey component on CLM-880 Fixed component shelf for two pairs of mounting angles,8.6 mm (9") For integration heavy monitors or other network 9" components. CLM-8800/880/880 Drawer U/U / U for one pair of mounting angles, 8.6 mm (9") For storing of small items and documents. G6

7 Construction OverViews CLM-0/0 Series 9" OPEN RACK 5 G7

8 9" Open Rack for Server & Cabling Management Based on CLM-0/0 Series CLM-0 with pair of mounting angles CLM-0 with pair of mounting angles CLM-0x-75xx in 750mm Depth CLM-0x-90xx in 900mm Depth Standard Constructions (Supplied) Page. CLM-8808 Mounting angle... G9. CLM Depth stays... G9 CLM Depth stays... G9. CLM Plinth... G9 CLM Plinth... G9. CLM-68 Triangle Base Supporter... CLM-69 Triangle Corner Supporter CLM-885 Bottom Crossbeam(Built-in CLM-8808)... G9 Supplied Accessories. CLM Cage Nut... K9. CLM Self-tapping a wsher screw... K. CLM Self-tapping screw... K Option Accessories. CLM-880 Overlapped component shelf... K. CLM-8806 adjustable Brackets Component shelf... K. CLM Vented adjustable component shelf... K. CLM-880 U Fixed vented component shelf... K 5. CLM-8805 Twin-arm component shelf... K 6. CLM-8805 Telescopic slide rails Slide-in Component shelf... K 7. CLM-8800 Drawer U,U,U... K-K 8. CLM-880 Support angles component shelf... E6 9. CLM-607 blanking panels (Metal)... K8 CLM-600 blanking panels (AL)... K8 0.CLM-00-7/0 Earth straps... K9. CLM-5007 Cable wiring duct... K. CLM-699 Cable shunting rings,metal... K9. CLM-8805 Section server rail... K9-K7 CLM-8805 Section server rail... K9-K7 CLM-8805 Section server rail... K9-K7 CLM-8805 Sections server rail... K9-K7. CLM-600 Cable clamp rails... K0 5. CLM-958 "/5" monitor enclosure... K CLM-950 7"monitor enclosure... K 6. CLM-8806 Power socket strip with mounting strip... K0 7. CLM-67 Various Patch panles... K-K7 8. CLM Cable entry with brush strips... K9-K0 9. CLM-9/ keyboard drawer & track ball with Telescopic slide rails... K 0. CLM Boom Bolt hinger... K7. CLM-6600 Castor... K CLM-660 Levelling foot... K7. CLM-8800 Cage Nuts... K-K0. CLM Shelf-tapping washers screw... K-K0. CLM-8899 Cable Shunting rings strip... K9 5. CLM-605 Support slide rails... E6 6. CLM Cable Shunting ring strips... I9-9" OPEN RACK G8

9 Accessories for CLM-0X Series Depth stays For securing and stabilizing two pairs of 8.6mm (9") mounting angles of the OpenRack. The length of the depth stays punched a line holes in pitch pattern 50mm flexible and can accommodate all spacings of mounting angles. There are Two length in 750/900mm solution Material: Sheet steel Supply Includes: Assembly parts Finished: Powder Coating in RAL705, RAL 90 CLM Length Pack No. 750mm 900mm Second pair of mountintg angle The full length mounting angle was punched a "U" pitch pattern in 5mm square holes accurately through fixing CLM-8800 cage Nuts & CLM washered screws for mounting 9" components. a second pair of mounting angles may be requested for mounting heavy 9" (8.6 mm)components stablity & security against overturn by fasten from front and rear. CLM U Height mm Pack No. Material:.0 Thickness Sheet Steel Supply Includes: Assembly parts. Finished: Powder Coating in color RAL705, RAL Bottom Crossbeam A Durable heavy design for connect CLM-8808 and CLM-8809 to be a stability Mounting Angle on floor. Material: sheet steel Supply Includes: Assembly parts. Finished: Powder Coating in color RAL705, RAL 90 CLM Pack No. 885 To extra order for the second. Plinth Frames To directly locate on floor for installation Mounting angles Punched a line holes in pitch pattern 50mm flexiable Depth to accommodate components length. Material:.0 Thickness sheet steel Supply Includes: Assembly parts. Finished: Powder Coating in color RAL705, RAL 90 CLM Length Pack No. 750mm 900mm Baying connectors CLM CLM CLM CLM-886 CLM Use to Pack No. For assembling rows for distributor frames, or for cable routing between Two Open Rack. Material: Hexagon Steel section Supply Includes: Self-tapping washer screw. Finished: Ni-plated G9

10 "D.I.Y" Packing Operation CLM-0-xxxx packages CLM-0-xxxx packages CLM-0/ on CLM's pallet CLM-5-xx packages CLM-5-xx packages CLM-5/ on CLM's pallet "CLM" Rack Pallet CLM-T000 putting square pipe stays on To separate square pipe stays Bottom plate in equal pitch pattern Patent Pended in Taiwan,China storing empty pallet Dimension: 50x50x0 mm Load capacity : 000 kgs The CLM-T000-xxxx is metal pallet made from heavy-duty steel pie stay, designing for loading big & heavy "D.I.Y" partial material of "CLM" Rack To do a long-distance or oversea transportation specialy by sea in container shipment in security delivery to protect all material can against transfigure by heavy load. Besides, It's designed for pile up to great height layer up on layer to for using as storage equpment can save expensive warehouse cost. There's not doulbt in vibration,it already did sometimes test from up 7.0 degree earthquack free slantting and falling. Removable square pipe stays have been designed to insert into a tail-made stiffening furrow in an exactly connection for heavy-load in a full area capacity. Whiling empty, just do pull-out and put on the plinth in equal pitch pattern can pipe up to great height layer up on layer for storing in warehouse to have more free space(see ) It's available for extra order the CLM-T000-xxxx to as your storage equipment. Material: square-pie stays Supply Includes:. square pipe stays. welded plinth frame Petent Pending in: Taiwan, USA, Germany, China G0

11 CLM-5/5 Open Rack Series CLM-5 CLM-5 Clearance Size (U) 9" OPEN RACK Clearance Size (U) Clearance Size (U) Clearance Size (U) Clearance Size (U) Clearance Size (U) Model No : CLM-5-xx One pair of mounting Angles Total Unit (U): Pack No Total Height (A): (8") Inner Height (B): c.h c.h. 60. c.h. 78. c.h Clearance Height "U" U=.5mm Standard Equipment Included / MODEL NO CLM Mounting angle See page No.G7. CLM Plinth frame See page No.G7. CLM Roof frame See page No.G7. CLM /8 Hexagon NUT Screw See page No.G8 5. CLM /8 Hexagon Washer Screw See page No.G8 6. CLM #-x(l)0.5"(.7mm) Screw See page No.G8 50 Model No : CLM-5-xx Two pair of mounting Angles Total Unit (U): Pack No Total Height (A): (8") Inner Height (B): c.h c.h. 60. c.h. 78. c.h Clearance Height "U" U=.5mm Standard Equipment Included / MODEL NO CLM Mounting angle See page No.G7. CLM Plinth frame See page No.G7. CLM Roof frame See page No.G7. CLM /8 Hexagon NUT Screw See page No.G8 5. CLM /8 Hexagon Washer Screw See page No.G8 6. CLM #-x(l)0.5"(.7mm) Screw See page No.G CLM Depth stray See page No.G7 Optional Accessories detail Please see page No. of G6 G

12 CLM-5/5 9"OPEN RACK For Cabling Management & Telecommunication 9" OPEN RACK Material: Extruded Aluminum section # 606 Alloy Model No. Description: CLM-5-xx One pair of mounting Angles in 750mm Depth. CLM-5-xx Two pairs of mounting Angles in 750mm Depth. Main Mechanism Supplies: Mounting angle: or pair of CLM-650-xx Roof Frame: or pair of CLM Plinth Frame: or pair of CLM & pair of CLM-65 for CLM-5 Depth Stays: pair of (8 pcs) CLM (656-0x, 656-0x) for CLM-5-xx (made of sheet steel) Finished: Anodized in shiny silver For more detail please see page No. of G7 Features: The Extruded Aluminum section#606 Alloy is hardened vally "U-Shaped" concept has a solution for heavy-load capacity. punched on a "U" pitch pattern in round holes accurately for quick fastering system in no time. The CLM-5 series OpenRack offers to accommodate for wiring, distributor systems and 9"(8.6mm)components The The CLM-5 series OpenRack offers to accommodate 9"(8.6mm) NetWorks components,server system equipment to install slide-rails,component shelves,telescopic rail and cable clamp rails on to protect all NetWork components against overturn and in no bias condition. For heavy-loading capacity to extra order castor for rugged floor and permit-free location to extra order levelling feet for durable stability. This save the customer's time and money during assembly. G

13 Variable, flexible and functional - Assembly friendly solution for numerous applications in the field of network technology & electronics. A high level of stability thanks to the high quality of extruded aluminum framework. The most cost-effective rack series! Extruded Aluminum Section #606 Alloy. Unlimited mounting opportunities on every section. Extruded roof/plinth for ceiling/floor anchorage. pair of mounting angles for heavy installed equipment or double panel assembly. Compatible with CLM system accessories. "D.I.Y." Exporting package for saving long distance Importing & transportation cost Construction Punching hole-line Mounting angles For iinstalling cable routing, components, socket strips, component shelves, slide rails and telescopic rails. Depth Stays, CLM-888 Maximum 7.5mm(5") depth ajustable volume in 7 steps (7.5mm per step).(see page of G7) Roof/Plinth,Extruded Aluminum #606Alloy section The most cost-effective solution for your network arrangement. Shiny silver gray aluminum provides a fine neat touch. 9" OPEN RACK Baying system CLM-5 connected with 6" baying duct Front view.(see page of G7) CLM-5 connected with 6" baying duct Rear view.(see page of G7) CLM-5 connected with " baying duct Front view.(see page of G7) CLM-5 connected with " baying duct Rear view.(see page of G7) CLM Self-tapping screw, # (see page of G8) Cable shunting ring / Rail CLM (optional) 6" Baying bar (see page of G8) For professional, secure fixing of cables and conduits. CLM-65-0 (optional) " Baying bar (see page of G8) For professional, secure fixing of cables and conduits. G CLM-699(Metal) (see page of K9) CLM-8899-xx (see page of K9) CLM-600-0(Cable Claim rail) (see page of K0)

14 Example of Rack installation for predominantly active components: CLM-5 Open Rack with two pairs of mounting angles, stabilized by two pairs of depth stays included. Monitor enclosure. U blanking panel. U Keyboard drawer with telescopic rail including IPC keyboard. U IPC chassis. U IPC chassis. U Adjustable component shelf for Two pairs of mounting angles. U Vented Fixed component shelf for two pairs of mounting angles. U Slide-in component shelf mounting on with telescopic slider. " baying duct with 5V/0V power socket strips. Cable shunting strip in rear. 9" OpenRack For Cabling & Telecommunication Based on CLM-5/5 Series Example of rack installation for predominantly passive components: Installation of patch panels for various coupler systems. U cable management panel for horizontal cabling management. Shunting ring for cable routing. U Adjustable Component shelf. U Drawer. " baying duct. 9" OPEN RACK Technical installation CLM (see page of K) Twin-aim Component shelf vented plate & brackets in U, for pair of mounting angle, for mounting on 8.6mm(9"). CLM (see page of E6) Support angles brackets in U, for pairs of mounting angle to install on corner of angles. CLM-8805-xx (see page of K) Slide-in Component shelf vented plate & pair of telescopic rail in U, for pairs of mounting angle for mounting on : 8.6mm(9"). CLM (see page of K) Overlapped Component shelf U, for installation two pair of 8.6mm(9") mounting angles. CLM-8806-xx (see page of K) Adjustable Component shelf U, for Adjustable installation two pair of 8.6mm(9") mounting angles. CLM-9 (see page of K) Slide-in Keyborad Drawer U, for installation two pair of 8.6mm(9") mounting angles with Telescopic slide rail. G

15 Construction OverViews CLM-5/5 Series 9" OPEN RACK G5

16 9" Open Rack For Cabling Mangement & Telecommunication Based on CLM-5/5 Series CLM-5 CLM-5 with pair of mounting angle... with pairs of mounting angle... Page G G Standard Constructions (Included). CLM Mounting angle... G7. CLM-888 Depth stay... G7. CLM-65-9 plinth frame... G7. CLM-65-9 Roof frame... G7 5. CLM / /8'X(L)/' Hexagon NUT screw... G8 6. CLM /8 /8' screw nut Hexagon Washer NUT... G8 7. CLM #-X(L) 0.5' (.7mm)screw slef-tapping screw for CLM-5... G Option Extension Accessories. CLM-885 " Baying Duct... G7. CLM-886 6" Baying Duct... G7. CLM " Baying bar... G8. CLM " Baying bar... G8 5. CLM /8 Hexagon NUT screw... G8 6. CLM /8 Hexagon Washer NUT... G8 7. CLM-50- Plastic-Made Ring... G8 Option Accessories. CLM-880 Overlapped component shelf... K. CLM-8806 Adjustable Brackets Component shelf... K. CLM Vented adjustable component shelf... K. CLM-880 U Fixed vented component shelf... K 5. CLM-8805 Twin-arm component shelf... K 6. CLM-8805 Telescopic Slide rails Slide-in Component shelf... K 7. CLM-8800 Drawer U,U,U... K-K 8. CLM-880 Support angles component shelf... E6 9. CLM-607 blanking panels (Metal)... E6 CLM-600 blanking panels (AL)... K8 0.CLM-00-7/0 Earth straps... K9. CLM-5007 Cable wiring duct... K. CLM-699 Cable shunting rings,metal steel... K9. CLM-8805 Section server rail... K9-K7 CLM-8805 Section server rail... K9-K7 CLM-8805 Section server rail... K9-K7 CLM-8805 Sections server rail... K9-K7. CLM-600 Cable clamp rails... K0 5. CLM-958 "/5" monitor enclosure... K CLM-950 7"monitor enclosure... K 6. CLM-8806 Power socket strip with mounting strip... K0 7. CLM-67 Various Patch panles... K-K7 8. CLM Cable entry with brush strip... K9-K0 9. CLM-9/ Keyboard drawer & keyboard with Telescopic slide rails... K 0. CLM Swelling Boon Bolt hingers... K7. CLM-6600 Castor... K CLM-660 Levelling foot... K7. CLM-8800 Cage Nuts... K-K0. CLM Shelf-tapping washers screws... K-K0. CLM-8899 Cable Shunting rings strip... K9 5. CLM-605 Support slide rails... E6 6. CLM Cable Shunting ring strips... I9-9" OPEN RACK G6

17 Accessories for CLM-5/5 Depth stays Roof & Plinth Frame CLM-65-9 CLM Size Pack No. 508~65mm Overlapped a "U" Slide angles pcs pcs punched in flexiblity a pitch pattern 7.5mm holes Totally 7 steps (7.5mm per step) Maximum 7.5mm(5") Depth to accommate component length. Material:.0 Thickness Sheet Steel Supply Includes: Assembly parts. Finished: powder coating in RAL 705 or RAL 90 CLM Size Pack No. CLM mm mm The most cost-effective solution for your network arrangement to extend area against vibration bias. Shiny silver aluminum provides a fine neat touch. pcs CLM-65-9 to fix in a pair of mounting angles for CLM-5-xx pcs CLM-65-9 to be CLM-5-xx pcs CLM-65-9 to complete mounting angles to be a stabile floor stability plinth Material: Extruded Aluminum #606 Alloy section Assembly parts Included Finished: Anodized 9" OPEN RACK Multi-function Mounting Angles The depthly "U" shaped suffening furrow design for a heavy-load capicity. Extruded Aluminum section punched precise three round hols in a "U" pitch pattern for versatile Installation in front or Rear for mounting 9" components in bias and stability. Material: Extruded Aluminum section # 606 Supply Includes: Assembly parts. CLM U Pack No Finished: Anodized 6" Baying Duct It punched in a pitch pattern.5mm(u) Max to step lines round holes for attachment on a plastic made ring to proect cable free-hurt. Material: Extruded Aluminum section # 606 Supply Includes: Assembly parts. Finished: Anodized CLM U Pack No " Baying Duct It punched in a pitch pattern.5mm(u) Max to step lines round holes for attachment on a plastic made ring to proect cable free-hurt. Material: Extruded Aluminum section # 606 Supply Includes: Assembly parts. Finished: Anodized CLM U Pack No G7

18 Accessories for CLM-5/5 " Baying Bar For professional, secure fixing of cables and conduits. Material: 0 Steel Wire x" Finish: Zinc-Plated For connection See page No.G CLM Length Pack No. " 6" Baying Bar For professional, secure fixing of cables and conduits. CLM Length Pack No. Material: 0 Steel Wire x6" " Finish: Zinc-Plated For connection See page No.G Plastic- Made Ring Hexagon Nut screw inch CLM Didmeter mm Pack No. 0 For Model No. 5X XX CLM Size (inch) / / /6 5/ /8 /8 Pack No / / /8 5/ / / /8 7/8 0 0 For Model No " OPEN RACK Hexagon Washer-Nut CLM Size (inch) / / /6 5/ /8 /8 Pack No / / /8 5/ / / /8 7/ For Model No. 5 5 Self-tapping screw # CLM Size(mm) Pack No. For Model No # X8mm # X0mm # X mm X # X 6mm 50 G8

19 Ordering form for mounting components accessories by CLM CLM-0x series The "CLM" be your tailor-made & reliable Vendor to assemble your demand facility to save your free time & money. After optional order 9" components(accessories)then fill out the & Description in the square Blank-space and point out the "U" postion let "CLM" to serve you to mounting on the cabinet. For "U" height mounting 5U U U U CLM Description CLM-0 - U 0U 9U 8U The starting point from Bottom in front 0 "U" to what "U" hight for mounting 9" components(accessories) 7U 6U 5U U U U U 9" OPEN RACK 0U 9U 8U 7U 6U 5U U G0 0 "U" Basic point U U U 0U 9U 8U 7U 6U 5U U U U U 0U 9U 8U 7U 6U 5U U U U U

20 Ordering form for mounting components accessories by CLM CLM-5x series The "CLM" be your tailor-made & reliable Vendor to assemble your demand facility to save your free time & money. After optional order 9" components(accessories)then fill out the & Description in the square Blank-space and point out the "U" postion let "CLM" to serve you to mounting on the cabinet. CLM-5 - The starting point from Bottom in front 0 "U" to what "U" hight for mounting 9" components(accessories) 0 "U" Basic point For "U" height mounting 5U U U U U 0U 9U 8U 7U 6U 5U U U U U 0U 9U 8U 7U 6U 5U U U U U 0U 9U 8U 7U 6U 5U U U U U 0U 9U 9U 7U 6U 5U U U U U CLM Description 9" OPEN RACK G0