CUBICLE SYSTEMS LTD CI/SfB 74 X IPS Pre-plumbed Wall Duct Access Panel System ISO 9001:2000
IPS the perfect washroom solution plumbing wall duct panel system and cubicles installed in one operation Cubicle Systems IPS (Integrated Plumbing System) is a fully adjustable steel frame fitted with decorative removable panels and available with a standard range of factory installed sanitaryware, pre-plumbed and tested, and is supplied as a complete module that requires only to be installed and connected to site water supply and services. IPS can be produced and supplied to meet virtually any size requirement. Available as full or half height, the steel frame is adjustable, within its design limitations, to achieve a plumb level and inline installation. IPS is designed to be included as part of any cubicle systems range of washrooms and can be incorporated in any installation configuration. IPS is installed by trained washroom installers but is commissioned by qualified plumbing contractors. Water supplies and soil pipework are installed by the plumbing contractor, working in a clear unobstructed area, to predetermined positions as indicated within the site drawings provided. Water supply pipes are fitted with isolation valves, ready to connect with IPS modules. IPS wall duct panel system is offered fitted with our standard range of sanitaryware and plumbing, but can also be supplied fitted with other specified sanitaryware. Cubicle Systems Ltd. is an independent washroom manufacturer able to work with, install and supply, all makes or brands of sanitaryware. Factory manufactured, pre-plumbed and tested modules delivered to site Robust, adjustable, galvanised steel frame and fixing method Choice of decorative panels finishes Supplied with standard sanitaryware or as specified by the customer IPS is a complete system at a fixed price which eliminates extra cost or add-on charges IPS is installed by the site plumber, which means that modules arrive on site complete with sanitaryware and all fittings. This eliminates lost time sourcing individual parts required. Installation sequence avoids damage to sanitaryware and decorative panels Reduces on-site installation time Up to 20% cost saving Factory manufactured modules are supplied with sanitaryware and decorative panels removed, which helps eliminate on site damage by other trades. IPS wall panel system conceals pipework, creates a new wall with access for servicing and maintenance IPS modules are supplied with dual flush water management system as standard IPS is available in any sanitaryware and plumbing configurations including sensor automatic options A Prestige site, Barrell Booze, Luton. Modular 2, cherry wood finish with grey mist pilasters and fixings, incorporating IPS pre-plumbed modules 1 and 6. 2
Concealed plumbing with easy access for maintenance. President Washroom, incorporating IPS Modules 1, with back to wall pans President Washroom incoping IPS module 1 back to wall pans A practical way forward The idea of pre-plumbed modules is not new, but the way Cubicle Systems Ltd achieve it is, disregarding the old way and its associated problems of accessing a site with heavy, cumbersome and fragile units, with sanitaryware exposed to damage in transit or premature exposure to other traders on site. Why make hard work of it and risk damage when there is a better way? 1. Cubicle Systems Ltd. IPS modules are factory manufactured and include a self supporting adjustable steel frame, plumbing and sanitaryware, water supply and soil connection fittings and fixings required to complete. 2. IPS modules are produced to specification and function tested. Decorative panels fitted already machined, ready to receive sanitary and fittings. 3. The module now complete and tested is numbered and has vulnerable or exposed sanitaryware removed and boxed for protection. All lift off panels are removed, numbered and packed to prevent damage. 4. When arriving on site, the modules are light in weight and easy to handle, with no exposed sanitaryware or vulnerable parts likely to get damaged. 5. Installation of the IPS modules is in five easy stages install the frames in a clear area with good accessibility. When all the frames have been installed, simply reposition and fix the sanitaryware, then connect the soil outlets and water supply, and refit the access panels. 6. Sanitaryware and lift off access panels remain protected until required, eliminating risk of damage. 3
Modules & Description Module 1 Back to Wall WC Olympus white BTW pan. Olympus/Pressalit white seat and lid. Pneumatic, dual flush, push button set. Pneumatic dual flush cistern. Pan to soil connector. Flexi cold water connector with shut off valve. Module 2 Wall Hung W.C Load tested to in excess of 200 Kg. Olympus Rema white wall hung pan. Olympus Rema white seat and lid. Pneumatic, dual flush, push button set. Pneumatic dual flush cistern. Pan to soil connector. Flexi cold water connector with shut off valve. Module 3 Urinal with Exposed Trap Olympus white urinal bowl. Chrome plated urinal spreader. Chrome plated 40mm bottle trap. 4.5 litre auto cistern (shared). 400 400 700 400 400 700 650 850 320MIN 0 320MIN 5 320MIN 3 Module 1 Half Height Back to Wall WC Module 2 Half Height Wall Hung W.C Module 3 Half Height Urinal with Exposed Trap Olympus white back to wall W.C. pan with seat and lid. 4 Olympus wall hung W.C. pan and integral support frame, seat and lid. Olympus urinal, exposed chrome trap and pipe, stainless steel spreader.
Manufactured to standard sizes but available to suit all locations and specifications Module 4 Basin with Exposed Trap Olympus white 520mm basin. Chrome plated 32mm bottle trap. Duo deluxe single lever CP m/block mixer tap. Flexi hot and cold water connector with shut off valve. Module 5 Basin with Concealed Trap Olympus white 520mm concealed trap basin. WP 32mm bottle trap. Wall mounted CP/MB mixer with handle. Flexi hot and cold water connector with 800 750 800 750 650 850 shut off valve. Module 6 Urinal with Concealed Trap Olympus white concealed trap urinal bowl. Chrome plated urinal spreader. WP 40mm bottle shallow seal bath trap. 4.5 litre auto cistern (shared). 320MIN 470 320MIN 470 320MIN 3 Module 4 Half Height Basin with Exposed Trap Module 5 Half Height Basin with Concealed Trap Module 6 Half Height Urinal with Concealed Trap Olympus basin, exposed chrome trap, single lever chrome plated monoblock mixer tap. Olympus basin, concealed trap, wall mounted, shown with a sensor tap. Olympus urinal, concealed trap, stainless steel spreader. 5
IPS installation in 5 easy stages Stage 1 Site plumber receives site preparation drawing provided and installs water and soil pipework as indicated. All other concealed services installed at this time. Installer fits in position floor and wall track ready to receive IPS frames. Stage 2 The IPS frames arrive on site with sanitaryware and decorative panels already removed to avoid damage. The cistern remains fixed to the frame. The installer locates the IPS frame in the floor channel centred on the soil pipe inlet. Adjust for height, plumb and level, securely fix to floor and wall channels. Stage 3 Stage 4 Install decorative frame spacer panels, skirting wall and ceiling scribes. 6 Installer repositions the bottom decorative panel, refits sanitaryware and connects flexible water supply pipes. The on site plumber tests the system for leaks or non-conformities. Prior to acceptance, decorative panels are replaced after all service work has been carried out.
A cost effective way forward for refurbished or new build washrooms. A properly managed installation No untidy work areas Damage to sanitaryware and decorative panels virtually eliminated Stage 5 The installation complete and tested, the installer replaces the decorative panels and silicon seals joints where necessary and cleans ready for acceptance by the customer. Smooth operation with plumber and installer working together A perfect washroom solution IPS installed with solid grade compact laminate panels, including access for maintenance. Urinals fitted with concealed traps and water management auto flushing. 7
Specification: IPS modules are manufactured using 16 gauge galvanised sheet steel formed to Cubicle Systems exclusive design to create a fully adjustable self supporting long-lasting, robust frame, designed to accept virtually any option of sanitaryware, plumbing and fittings, whether from our standard range or as specified by the customer. In keeping with company policy our components are designed and manufactured to a specification in excess of requirements and include many new features not available elsewhere. IPS is designed to be installed in any location or configuration and is adaptable for any size requirement and specification. Top Infill Fixing ing Brackets Standard Crossrail Wall l Track Adjustable Wall Bracket Frame Upright Wall Track Cubicle Systems IPS creates a self supporting wall. Module 2 Wall Hung WC load tested to in excess of 200 Kg Cistern Adjustable Wall Hung WC Support Frame Pan Finished Floor Level Floor Track Frame Level Adjustment CUBICLE SYSTEMS LTD TOILET CUBICLES & WASHROOM FACILITIES Nova Business Units, Gore Road Industrial Estate, New Milton, Hampshire BH25 6RP Telephone: 01425 615585 Fax: 01425 628144 email: sales@cubiclesystems.co.uk www.cubiclesystems.co.uk