AT FIRST SIGHT Important informations

Transcription

1 Technical catalogue

2 AT FIRST SIGHT Important informations TIPS FOR USING THIS GUIDE Our new technical catalogue includes now all important information you will need for planing or call for tenders. Every single article with photo, technical data and specification is described on one page. That makes it easy for you to find all necessary technical information for each LAUFEN article. Technical data Here are the main points on one view: article number for ordering certified standards dimensions in mm standard option (on stock) special options (not on stock) water inlet for urinals water outlet for toilets and urinals weight in kg accessories excl. suits all ceramic LAUFEN articles mounting accessories incl. automatically on delivery mounting accessories excl. which we recommend for installation and have to be ordered separately Specifications You can import that text directly in your offer for projects. For each article and even for each size of washbasin a separate text. Technical data All necessary measurements in scale 1:20, accessories 1:10 are included in the drawings. You can easily use them for planing. INSTALLATION ADVISES General All indicated measurements to the floor or the wall are understood to be inclusive of the finished surface, that means from the finished floor or finished wall. The mounting surfaces of the sanitary fixtures are flat. To compensate for irregularities in the wall or floor, levelling material is to be applied to the mounting surfaces. Suitable materials are white cement, grouting cement, Portland cement, etc. Levelling material is available as LAUFEN product no INSTALLATION ADVISES Washbasins / Small washbasins As a rule, the mounting height of approx. 850 mm for washbasins and small washbasins refers to the height above the finished floor level, to the upper edge of the front of the washbasin or small washbasin. If it is decided to mount the fixtures above or below this height, the connections for the trap and corner valves must be altered appropriately. In case of pedestal mounting, the height of the upper edge of the washbasin must be fixed according to the height of the pedestal. The dimensions stated for the trap connection heights in washbasins and small washbasins apply the off-centre waste fittings. In the case of plug or screen valves, approx. 50 mm must be added to trap connection height depending on the type of fitting. INSTRUCTIONS FOR CARE The glaze of ceramic fixtures resists the acids, solvents and alkalis contained in most toiletries, cleansers and cosmetics. Please remove residues of such agents and refer to the instructions of the manufacturer of these products. If sanitary fixtures with a ceramic trap (WC s, urinals, etc.) are exposed to frost, a suitable anti-freezing preventative must be added to the water in the trap. For ceramic with WonderGliss surfaces and non ceramic parts, e.g. WC seat, furniture, stone, metal, etc. use abrasive cleaners. SPECIAL REMARKS Owing to different light conditions or variations in sanitary ware surfaces, identical colours may evoke different impressions. Subject to alterations. Subject to printing errors. Models and technical details were updated before printing. The manufacturer reserves the right of alterations in construction and details. GUARANTEE 5 years guarantee for ceramic products when installed by a licensed plumber. Wall and floor surfaces must withstand the surface pressures imposed by the mounting and utilisation of the fixtures. The ability of the sanitary fixtures to bear the loads imposed in use depends on an adequate load-bearing capacity in the walls and floors on which they are mounted. 1

3 WONDERGLISS True cleanliness is meant to last ON THE SURFACE IT SEEMS TO BE A MIRACLE With Wondergliss, the cleaning of your ceramic sanitary ware becomes child s play. Due to this especially smooth surface coating, dirt and hard water desposits don t stand a chance they simply drip off with the water. And since there is no build-up of deposits, there is no more need for strong cleansing agents. THE GREATES EFFECT RESULTS FROM THE SMALLEST DETAIL Wondergliss owes is fabulous properties to very tiny particles so-called nanoparticles. Those tiny elements can be found between the atomic ceramic components and are responsible for the material s pore-free surface. Owing to this revolutionary development of the high-tech company NANOGATE, the few remaining deposits may simply be wiped away. GREAT SUCCESS DUE TO THE HIGH QUALITY The surface of Wondergliss ceramic sanitary ware by Laufen will stay shining and smooth for an especially long period of time. The secret for that lies in the furnace: The Wondergliss coating is not only applied to the surface but is also fired. This procedure secures an especially high level of quality and causes absolutely no damage to the environment. 2

4 COLOUR TABLE COLOURS 000 (200) White 018 (218) Bahamabeige 037 (237) Manhattan 046 (246) Whisperblue 049 (249) Pergamon 050 (250) Ägäis 757 (290) Edelweiss 927 (299) Graniti STUDIO LINE SET ALESSI 1) SET DESIGN 000 White SET MYLIFE 1) SET VIENNA SET GALLERY SET SWING COUNTERTOP BASINS DESIGN FIORA DUE GALLERY DUE OREGON SANO COUNTERTOP BASINS CUTABLE FIORA GALLERY PALACE / PALACE DUE VIENNA-VARIA 018 Bahamabeige 046 Whisperblue 050 Ägäis 037 Manhattan 049 Pergamon BUILT IN BASINS BIJOU BIROVA COMPAC CRISTAL FIORA LIPSY SAVOY 927 Graniti 757 Edelweiss DROP IN BASINS ALESSI 1) FIORA INDOVA LAURA MYLIFE 1) OBJECT 2) VIENNA 1) = only available in 200 White WonderGliss 2) = not available with WonderGliss WonderGliss is available on all studio line products. Please use the following numbers for your order: 200 White 218 Bahamabeige 237 Manhattan 246 Whisperblue 249 Pergamon 250 Ägäis 290 Edelweiss 299 Graniti

5 COLOUR TABLE COLOURS 000 (200) White 018 (218) Bahamabeige 037 (237) Manhattan 046 (246) Whisperblue 049 (249) Pergamon 050 (250) Ägäis 757 (290) Edelweiss 927 (299) Graniti SEMI RECESSED BASINS GALLERY OBJECT 2) SWING VIENNA 018 Bahamabeige 000 White WASHBASIN BOWLS ALESSI 1) MYLIFE 1) 037 Manhattan PROFESSIONAL LINE SET BATHLINE 2) SET DORADO 2) SET LIBERTYLINE 2) SET OBJECT 2) 1) 1) 1) 1) 046 Whisperblue 049 Pergamon ACCESSORIES UNIVERSAL 2) URINALS CAPRINO 2) CASA 2) COMO 2) KAPRUN 2) TAMARO 2) / TAMARO-S60 2) / TAMARO-S60B 2) / TAMARO-VS 2) TARO-NOVA 2) / TARO-UNI 2) RION 2) 050 Ägäis 927 Graniti 757 Edelweiss SPECIAL ARTICLES BAMBI 2) BERNINA 2) COLLEGE 2) REHAB 2) 1) = only available in 200 White WonderGliss 2) = not available with WonderGliss WonderGliss is available on all studio line products. Please use the following numbers for your order: 200 White 218 Bahamabeige 237 Manhattan 246 Whisperblue 249 Pergamon 250 Ägäis 290 Edelweiss 299 Graniti

6 SET ALESSI

7 SET ALESSI Washbasin Order no Certified to DIN EN 32 Dimensions 520 x 525 mm Specification Charge centre tap hole with integrated syphon cover Special specification Charge 109 without tap hole with integrated syphon cover 20,5 kg Mounting acc. incl. Mounting acc. excl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Special nut M10, order no Stone screw fixing set M

8 SET ALESSI Washbasin Order no Certified to DIN EN 32 Dimensions 600 x 525 mm Specification Charge centre tap hole with integrated syphon cover Special specification Charge 109 without tap hole with integrated syphon cover 25,5 kg Mounting acc. incl. Mounting acc. excl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Special nut M10, order no Stone screw fixing set M

9 SET ALESSI Washbasin Order no Certified to DIN EN 32 Dimensions 520 x 530 mm Specification Charge centre tap hole with integrated pedestal Special specification Charge 109 without tap hole with integrated pedestal 41,0 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Fixing set, order no ~250* ~655* * = Determiner the exact dimension for the fixing set during the installation. 1.3

10 SET ALESSI Drop in basin Order no Certified to DIN EN 32 Dimensions 500 x 500 mm Specification 1 centre tap hole 10,0 kg Mounting acc. incl. with concealed ceramic outlet and overflow, chrome-plated vertical cover, order no Template, order no Mounting acc. excl. Syphon D40 chrome order no /160* 530/560* 600/660* 900 * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 1.4

11 SET ALESSI Mounting indication matching for Drop in basin order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Silicon caoutchouc 1.5

12 SET ALESSI Washbasin bowl Order no Certified to DIN EN 32 Dimensions 520 x 520 mm Specification Charge centre tap hole Special specification Charge 109 without tap hole 12,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Template, order no Fixing set, order no Mounting acc. excl. Syphon D40 chrome, order no /160* 530/560* 600/560* * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 1.6

13 SET ALESSI Fixing set Order no matching for Washbasin bowl, order no DESCRIPTION 1. Washbasin bowl 2. Worktop 3. Silicon caoutchouc 4. Plug 5. Washer 6. Hexagonal nut 7. Grubscrew 1.7

14 SET ALESSI Floorstanding WC combination Order no Certified to EN 997 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical mm 36,0 kg Accessories excl. Cistern, order no Seat and cover, order no Mounting acc. incl. Device for fixing, order no Mounting acc. excl. for horizontal outlet use commercial straight connection tubes for VARIO outlet and 205 mm use GEBERIT-connection set, order no for VARIO outlet mm use only LAUFEN-connection set, order no

15 SET ALESSI Cistern Order no Certified to DIN matching for Floorstanding WC pan order no Specification Dual-Flush (3/6-l-flush) water condensation insulation Water inlet rear 10,0 kg Mounting acc. included nten Mitt

16 SET ALESSI Floorstandimg WC pan Order no Certified to DIN Specification Washdown for 6-l-flush Outlet horizontal vertical 70 and 125 mm 29,5 kg Accessories excl. Seat and cover, order no Mounting acc. incl. Device for fixing, order no Mounting acc. excl. for horizontal outlet use commercial straight connection tubes for outlet vertical 70 mm LAUFEN-connection set, order no for outlet vertical 125 mm LAUFEN-connection set, order no

17 SET ALESSI Wallhung WC pan Order no Certified to EN 997 Specification Washdown for 6-l-flush Outlet horizontal 24,5 kg Mounting acc. incl. Fixing set for wall LAUFEN, order no Mounting acc. excl. commercial water outlet connection Stone screw fixing set

18 SET ALESSI Seat and cover Order no matching for Floorstanding WC pan order no , Wallhung WC pan order no Specification removable with automatic lowering system with ACTIVE SHIELD 2,8 kg Mounting acc. included nten Mitt 1.12

19 SET ALESSI Floorstanding bidet Order no Specification 1 centre tap hole 22,0 kg Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no Device for fixing, order no Mounting acc. excl. Syphon D40 chrome order no

20 SET ALESSI Wallhung bidet Order no Specification 1 centre tap hole 18,5 kg Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no Fixing set for wall LAUFEN, order no Mounting acc. excl. Syphon D40 chrome order no Stone screw fixing set

21 SET ALESSI Syphonic urinal Order no Certified to DIN 1390 Water inlet concealed Outlet horizontal Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 10,0 kg Accessories excl. Cover for urinal, order no Mounting acc. incl. Fixing set for wall LAUFEN, order no Mounting acc. excl. horizontal inlet connection GEBERIT, order no Syphon with horizontal outlet GEBERIT, order no Stone screw fixing set

22 SET ALESSI Cover for urinal Order no matching for Syphonic urinal, order no ,8 kg Mounting acc. included nten Mitt 1.16

23 SET DESIGN

24 SET DESIGN Washbasin Order no Certified to DIN EN 32 Dimensions 700 x 645 mm Specification 1 centre tap hole anti-splash rim 22,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. incl. Lateral cover, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 2.1

25 SET DESIGN Washbasin Order no Certified to DIN EN 32 Dimensions 700 x 645 mm Specification 1 centre tap hole anti-splash rim with integrated towel rail left and right 22,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. incl. Lateral cover, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 2.2

26 SET DESIGN Syphon cover Pedestal set / SYPHON COVER Order no matching for Washbasins order no , ,5 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL SET Order no matching for Washbasins order no , ,5 kg Mounting acc. included 2.3

27 SET DESIGN Countertop basin Order no Certified to DIN EN 32 Dimensions 1040 x 585 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 20,0 kg Accessories excl. Pedestal, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 2.4

28 SET DESIGN Pedestal Order no matching for Washbasin order no ,0 kg 2.5

29 SET DESIGN Small washbasin Order no Certified to DIN EN 111 Dimensions 450 x 390 mm Specification 1 centre tap hole anti-splash rim 10,5 kg Accessories excl. Syphon cover, order no Mounting acc. incl. Lateral cover, order no Mounting acc. excl. Mounting set, order no

30 SET DESIGN Syphon cover Order no matching for Small washbasin order no ,0 kg Mounting acc. incl. Device for fixing, order no

31 SET DESIGN Floorstanding WC combination Order no Certified to EN 997, EN 33 Specification Washdown for 6 l-flush Outlet horizontal VARIO, vertical mm 23,5 kg Accessories excl. Cistern, order no , or Seat and cover, order no Mounting acc. incl. Mounting set, order no Lateral cover, order no Mounting acc. excl. Special elbow for vertical connection mm, order no

32 SET DESIGN Cistern / CISTERN Order no Certified to DIN matching for Floorstanding WC pan order no Specification Flushing mechanisme GEBERIT water condensation insulation Flush can be interrupted by pressing twice Water inlet rear 13,5 kg Mounting acc. excl. Corner valve for water inlet

33 SET DESIGN Cistern Order no Certified to BS Standard matching for Floorstanding WC pan order no Specification Flushing mechanisme DUDLEY water condensation insulation bottom water overflow Water inlet bottom 13,5 kg Mounting acc. incl. Water inlet flexibel host, order no flexibel host for overflow tube, order no Mounting acc. excl. Corner valve for water inlet

34 SET DESIGN Cistern Order no matching for Floorstanding WC combination order no Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet rear 13,5 kg Mounting acc. excl. Corner valve for water inlet

35 SET DESIGN Floorstanding WC pan Order no Certified to EN 997, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 70 mm 20,5 kg Accessories excl. Seat and cover, order no Mounting acc. incl. Mounting set, order no Lateral cover, order no Mounting acc. excl. Special elbow for vertical connection 70 mm, order no

36 SET DESIGN Seat and cover Order no matching for Floorstanding WC pan order no or Specification Snap catch for easy removal 2,5 kg Mounting acc. incl. premounted on WC pan 2.13

37 SET DESIGN Floorstanding bidet Order no Specification 1 centre tap hole anti-splash rim 21,0 kg Mounting acc. incl. Syphonfixing, order no Mounting set, order no Lateral cover, order no Mounting acc. excl. Connection of mixer with the angle valves with standard hoses. Note the installation instruction of the hose supplier

38 SET DESIGN Hook Order no Dimensions 30 x 50 x 50 mm Specification Self adhesive fixing 0,6 kg TECHNICAL DRAWINGS / S 1 :

39 SET DESIGN Lamp Order no Certified to CE Dimensions 660 x 120 mm 3,0 kg Accessories incl. Bulb Mounting acc. included TECHNICAL DRAWINGS / S 1 :

40 SET DESIGN Shelf Order no Dimensions 660 x 140 mm 3,7 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

41 SET DESIGN Soap dish Order no Dimensions 120 x 140 mm 0,9 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

42 SET DESIGN Glass holder Order no Dimensions 120 x 140 mm 0,9 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

43 SET DESIGN Towel rail Order no Dimensions 98 x 470 x 110 mm 0,35 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

44 SET DESIGN Towel rail Order no Dimensions 600 x 85 x 140 mm 3,5 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

45 SET DESIGN Toilet roll holder Order no Dimensions 185 x 140 mm 1,7 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

46 SET DESIGN Toilet brush holder Order no Dimensions 140 x 140 mm 2,3 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

47 SET MYLIFE

48 SET MYLIFE Washbasin Order no Certified to DIN EN 32 Dimensions 750 x 530 mm Specification Charge centre tap hole Special specification Charge tap holes Charge 109 without tap hole 15,5 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. incl. Mounting acc. excl. Charge 104 and 108 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 3.1

49 SET MYLIFE Washbasin Order no Certified to DIN EN 32 Dimensions 950 x 600 mm Specification Charge centre tap hole Special specification Charge tap holes Charge 109 without tap hole 23,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. incl. Mounting acc. excl. Charge 104 and 108 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Mounting set, order no ~850* 950 * = Effective height must be fixed according to the height of the pedestal. 3.2

50 SET MYLIFE Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasins order no , ,5 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no , ,5 kg Mounting acc. incl. Device for fixing, order no

51 SET MYLIFE Drop in basin Order no Dimensions 750 x 480 mm Specification Charge centre tap hole Special specification Charge 109 without tap hole 13,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Template, order no Mounting acc. excl. Mounting set, order no

52 SET MYLIFE Fixing set Order no matching for Drop in basin, order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 3.5

53 SET MYLIFE Washbasin bowl Order no Dimensions 650 x 440 mm Specification Charge centre tap hole Special specification Charge 109 without tap hole 13,0 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Template, order no Mounting set, order no

54 SET MYLIFE Fixing set Order no matching for Washbasin bowl, order no DESCRIPTION 1. Washbasin bowl 2. Worktop 3. Silicon caoutchouc 4. Plug 5. Washer 6. Hexagonal nut 7. Grubscrew 3.7

55 SET MYLIFE Floorstanding WC combination Order no Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical mm 33,0 kg Accessories Cistern, order no Seat and cover, order no Mounting acc. incl. Device for fixing, order no Mounting acc. excl. for VARIO-outlet mm LAUFENconnection, order no for VARIO-outlet mm only LAUFENconnection, order no

56 SET MYLIFE Cistern Order no Certified to DIN matching for Floorstanding WC pan order no Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet rear 10,0 kg Mounting acc. included hinten Mitt

57 SET MYLIFE Wallhung WC pan Order no Certified to EN 997, EN 38 Specification Washdown for 6-l-flush Outlet horizontal 26,0 kg Accessories excl. Seat and cover, order no

58 SET MYLIFE Seat and cover Order no matching for Floorstanding WC pan order no Wallhung WC pan order no , Mounting acc. included hinten Mitt Specification Snap catch for easy removal with automatic lowering system 3.11

59 SET MYLIFE Floorstanding bidet Order no Specification 1 centre tap hole Special specification 3 tap holes 22,5 kg Accessories excl. Bidet seat, order no Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no Device for fixing, order no Mounting acc. excl. Syphon LAUFEN, order no

60 SET MYLIFE Wallhung bidet Order no Specification 1 centre tap hole 18,5 kg Accessories excl. Bidet seat, order no Mounting acc. incl. Run off and overflow system Clou GEBERIT, order no

61 SET MYLIFE Bidet seat Order no matching for Floorstanding bidet order no Wallhung bidet order no Specification Snap catch for easy removal 1,0 kg Mounting acc. included 3.14

62 SET VIENNA

63 SET VIENNA Washbasin Order no Certified to DIN EN 32 Dimensions 600 x 460 mm Specification 1 centre tap hole Special specification 3 tap holes 14,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~845* * = Effective height must be fixed according to the height of the pedestal. 4.1

67 SET VIENNA Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasins order no , , , ,0 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no , , , ,0 kg 4.5

68 SET VIENNA Countertop basin / cutable VARIA Order no Certified to DIN EN 32 Dimensions 800 x 480 mm Specification 1 centre tap hole cutable to 650 mm, with 2 side cover to 680 mm Special specification 3 tap holes 13,5 kg Accessories excl. Syphon cover, order no Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 650* max max.295 * = minimum measure for cutting 4.6

69 SET VIENNA Syphon cover Order no matching for Washbasin order no ,0 kg Mounting acc. incl. Device for fixing, order no

70 SET VIENNA Countertop basin / cutable VARIA Order no Certified to DIN EN 32 Dimensions 1000 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 19,0 kg Accessories excl. Syphon cover, order no Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* max max.295 * = minimum measure for cutting 4.8

71 SET VIENNA Syphon cover Order no matching for Washbasin order no ,0 kg Mounting acc. incl. Device for fixing, order no

72 SET VIENNA Countertop double basin / cutable VARIA DUE Order no Certified to DIN EN 32 Dimensions 1300 x 500 mm Specification per basin 1 centre tap hole cutable to 1150 mm, with 2 side cover to 1180 mm Special specification per basin 3 tap holes 26,6 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1150* max max.295 * = minimum measure for cutting 4.10

73 SET VIENNA Side cover left Side cover right / SIDE COVER LEFT Order no matching for Washbasins order no , , ,3 kg Otherwise factory fitted end pieces / SIDE COVER RIGHT Order no matching for Washbasins order no , , ,3 kg Otherwise factory fitted end pieces 4.11

74 SET VIENNA Drop in basin Order no Dimensions 555 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 7,2 kg Mounting acc. incl. Template, order no Mounting acc. excl. Mounting set, order no

75 SET VIENNA Drop in basin Order no Dimensions 630 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no Mounting acc. excl. Mounting set, order no

76 SET VIENNA Semi recessed basin Order no Dimensions 555 x 455 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no Mounting set, order no

77 SET VIENNA Semi recessed basin Order no Dimensions 650 x 540 mm Specification 1 centre tap hole Special specification 3 tap holes 12,0 kg Mounting acc. incl. Template, order no Mounting set, order no

78 SET VIENNA Fixing set Order no matching for Drop in basins order no , Semi recessed basins order no , DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 4.16

79 SET VIENNA Small washbasin Order no Certified to DIN EN 111 Dimensions 500 x 350 mm Specification 1 centre tap hole 7,0 kg Accessories excl. Syphon cover, order no Mounting acc. excl. Mounting set, order no

80 SET VIENNA Syphon cover Order no matching for Small washbasin order no ,5 kg Mounting acc. incl. Device for fixing, order no

81 SET VIENNA Floorstanding WC combination Order no Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical mm 30,0 kg Accessories excl. Cistern, order no , , Seat and cover, order no Mounting acc. excl. for VARIO-outlet mm LAUFENconnection, order no for VARIO-outlet mm only LAUFENconnection, order no

82 SET VIENNA Floorstanding WC combination COMFORT Order no Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical mm 30,0 kg Accessories excl. Cistern, order no , , Seat and cover, order no Mounting acc. incl. Device for fixing, order no Mounting acc. excl. for VARIO-outlet mm LAUFENconnection, order no for VARIO-outlet mm only LAUFENconnection, order no

83 SET VIENNA Cistern Order no Certified to DIN matching for Floorstanding WC pan order no , Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 12,5 kg Mounting acc. excl. Corner valve for water inlet

84 SET VIENNA Cistern Order no Certified to DIN matching for Floorstanding WC pan order no , Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 12,5 kg Mounting acc. excl. Corner valve for water inlet

85 SET VIENNA Cistern Order no Certified to DIN matching for Floorstanding WC pan order no , Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet bottom 12,5 kg Mounting acc. excl. Corner valve for water inlet

86 SET VIENNA Floorstanding WC pan Order no Certified to EN 997, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 20,5 kg Accessories excl. Seat and cover, order no Mounting acc. excl. for horizontal outlet use standard variable connection for outlet vertical LAUFEN-connection, order no

87 SET VIENNA Wallhung WC pan Order no Certified to EN 997, EN 38 Specification Washdown for 6-l-flush 17,0 kg Accessories excl. Seat and cover, order no

88 SET VIENNA Wallhung WC pan COMFORT Order no Certified to EN 997, EN 38 Specification Washdown for 6-l-flush 17,0 kg Accessories excl. Seat and cover, order no

89 SET VIENNA Seat and cover Order no matching for Floorstanding WC pan order no , , Wallhung WC pan order no , Specification Snap catch for easy removal 4,0 kg Mounting acc. included 4.27

90 SET VIENNA Floorstanding bidet Order no Specification 1 centre tap hole 17,0 kg

91 SET VIENNA Floorstanding bidet COMFORT Order no Specification 1 centre tap hole 19,0 kg Mounting acc. incl. Device for fixing, order no

92 SET VIENNA Wallhung bidet Order no Specification 1 centre tap hole 15,5 kg

93 SET VIENNA Wallhung bidet COMFORT Order no Specification 1 centre tap hole 17,5 kg */300** 225 * = corner valve inside / ** = corner valve outside 4.31

94 SET GALLERY

95 SET GALLERY Washbasin Order no Certified to DIN EN 32 Dimensions 550 x 460 mm Specification 1 centre tap hole 12,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~810* * = Effective height must be fixed according to the height of the pedestal. 5.1

98 SET GALLERY Washbasin Order no Certified to DIN EN 32 Dimensions 700 x 550 mm Specification 1 centre tap hole Special specification 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 5.4

99 SET GALLERY Washbasin for corner Order no Certified to DIN EN 32 Dimensions 725 x 655 mm Specification 1 centre tap hole 12,5 kg Mounting acc. excl. Mounting set, order no

100 SET GALLERY Countertop basin / cutable Order no Certified to DIN EN 32 Dimensions 1020 x 520 mm Specification 1 centre tap hole cutable Special options 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 630* max max * = minimum measure for cutting 5.6

101 SET GALLERY Countertop double basin Order no Certified to DIN EN 32 Dimensions 1350 x 520 mm Specification per basin 1 centre tap hole Special specification per basin 3 tap holes 30,5 kg Accessories excl. Syphon cover, order no Mounting acc. excl. Mounting set, order no max max

102 SET GALLERY Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasins order no , , , , , ,5 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no , , , ,0 kg 5.8

103 SET GALLERY Semi recessed basin Order no Dimensions 650 x 530 mm Specification 1 centre tap hole Special specification 3 tap holes 14,5 kg Mounting acc. incl. Template, order no Mounting set, order no

104 SET GALLERY Fixing set Order no matching for Semi recessed basin order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 5.10

105 SET GALLERY Small washbasin Order no Certified to DIN EN 111 Dimensions 470 x 380 mm Specification 1 centre tap hole 8,5 kg Accessories excl. Syphon cover, order no Mounting acc. excl. Mounting set, order no

106 SET GALLERY Syphon cover Order no matching for Small washbasin order no ,0 kg Mounting acc. incl. Device for fixing, order no

107 SET GALLERY Small washbasin for corner Order no Certified to DIN EN 32 Dimensions 490 x 470 mm Specification 1 centre tap hole 9,4 kg Mounting acc. excl. Mounting set, order no

108 SET GALLERY Floorstanding WC combination Order no Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO vertical cm 24,0 kg Accessories excl. Cistern, order no Seat and cover, order no Mounting acc. excl. for VARIO-outlet mm LAUFENconnection, order no for VARIO-outlet mm only LAUFENconnection, order no

109 SET GALLERY Cistern Order no Certified to DIN matching for Floorstanding WC pan order no Wallhung WC pan order no Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 12,5 kg Mounting acc. excl. Corner valve for water inlet

110 SET GALLERY Floorstanding WC pan Order no Certified to EN 997, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 70 mm 17,5 kg Accessories excl. Seat and cover, order no Mounting acc. excl. Special elbow for vertical connection 70 mm, order no

111 SET GALLERY Wallhung WC combination Order no Certified to EN 997, EN 34 Specification Washdown for 6-l-flush 24,0 kg Accessories excl. Cistern, order no Seat and cover, order no

112 SET GALLERY Wallhung WC pan Order no Certified to EN 997, EN 38 Specification Washdown for 6-l-flush 16,0 kg Accessories excl. Seat and cover, order no

113 SET GALLERY Seat and cover Order no matching for Floorstanding WC pan order no , Wallhung WC pan order no , Specification removable 2,5 kg Mounting set included 5.19

114 SET GALLERY Floorstanding bidet Order no Specification 1 centre tap hole 18,0 kg

115 SET GALLERY Wallhung bidet Order no Specification 1 centre tap hole 15,0 kg

116 SET SWING

117 SET SWING Washbasin Order no Certified to DIN EN 32 Dimensions 540 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 11,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~830* * = Effective height must be fixed according to the height of the pedestal. 6.1

118 SET SWING Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasin order no ,0 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no , , ,5 kg 6.2

121 SET SWING Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasins order no , ,0 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no , , ,5 kg 6.5

122 SET SWING Semi recessed basin Order no Dimensions 555 x 460 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no Mounting set, order no

123 SET SWING Fixing set Order no matching for Semi recessed basins order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Silicon caoutchouc 6.7

124 SET SWING Semi recessed basin Order no Dimensions 655 x 555 mm Specification 1 centre tap hole Special specification 3 tap holes 12,0 kg Mounting acc. incl. Template, order no Mounting set, order no

125 SET SWING Fixing set Order no matching for Semi recessed basin order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 6.9

126 SET SWING Small washbasin Order no Certified to DIN EN 111 Dimensions 480 x 360 mm Specification 1 centre tap hole 8,0 kg Accessories excl. Syphon cover, order no Mounting acc. excl. Mounting set, order no

127 SET SWING Syphon cover Order no matching for Small washbasin order no ,0 kg Mounting acc. incl. Device for fixing, order no

128 SET SWING Floorstanding WC combination Order no Certified to EN 977, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical mm 12,0 kg Accessories excl. Cistern, order no , , Seat and cover, order no Mounting acc. excl. for VARIO-outlet mm LAUFENconnection, order no for VARIO-outlet mm only LAUFENconnection, order no

129 SET SWING Cistern Order no Certified to DIN matching for Floorstanding WC pan order no Wallhung WC pan order no Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 16,0 kg Mounting acc. excl. Corner valve for water inlet

130 SET SWING Cistern Order no Certified to DIN matching for Floorstanding WC pan order no Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet bottom 16,0 kg 87,

131 SET SWING Cistern Order no Certified to DIN matching for Floorstanding WC pan order no Wallhung WC pan order no Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 16,0 kg Mounting acc. excl. Corner valve for water inlet

132 SET SWING Floorstanding WC Order no Certified to EN 977, EN 37 Specification Washdown for 6-l-flush Outlet horizontal vertical 70 mm 17,5 kg Accessories excl. Seat and cover, order no Mounting acc. excl. for horizontal outlet use standard variable connection for outlet vertical 70 mm LAUFEN-connection, order no

133 SET SWING Wallhung WC combination Order no Certified to EN 977, EN 34 Specification Washdown for 6-l-flush 20,0 kg Accessories excl. Cistern, order no Seat and cover, order no

134 SET SWING Wallhung WC pan Order no Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 14,0 kg Accessories excl. Seat and cover, order no Mounting acc. excl. Water outlet and inlet connection Bolt caps chrome, order no Steel support, order no Steel support, UK-Version, order no Kombifix LIV, order no Cover plate Kombifix, order no

135 SET SWING Seat and cover Order no matching for Floorstanding WC pan order no , Wallhung WC pan order no , Specification removable 2,8 kg Mounting set included 6.19

136 SET SWING Floorstanding bidet Order no Specification 1 centre tap hole 19,0 kg

137 SET SWING Floorstanding bidet Order no Specification 3 tap holes 19,0 kg

138 SET SWING Wallhung bidet Order no Specification 1 centre tap hole 15,0 kg Mounting acc. excl. Steel support, order no Steel support, UK-Version, order no Bolt caps, order no

139 SET LIBERTYLINE

140 SPECIAL ARTICLES Washbasin for handicapped LIBERTYLINE Order no Certified to DIN 18024/18025, EN 32 Dimensions 800 x 550 mm Specification 1 centre tap hole without overflow Special specification without tap hole 16,0 kg Mounting acc. excl. Run off and overflow system Clou GEBERIT, order no Mounting set, order no * 830 * = 550 mm by using run off and overflow system Clou 8.1

141 SPECIAL ARTICLES Wallhung WC pan for handicapped LIBERTYLINE Order no Certified to DIN 18024/18025, EN 997, EN 38 Specification Washdown for 6-l-flush, lenght 700 mm 23,5 kg Accessories excl. WC seat and cover, order no WC seat, order no Mounting acc. excl. Water outlet and inlet connection Bolt caps chrome, order no Steel support, order no Steel support, UK-Version, order no Kombifix LIV, order no Cover plate Kombifix, order no

142 SPECIAL ARTICLES Seat and cover LIBERTYLINE Seat LIBERTYLINE / SEAT AND COVER Order no matching for Wallhung WC pan order no Specification snap catch for easy removal 4,0 kg Mounting acc. included / SEAT Order no matching for Wallhung WC pan order no Specification snap catch for easy removal 3,0 kg Mounting acc. included 8.3

143 VANITY BASINS

144 COUNTERTOP BASINS / CUTABLE

145 VANITY BASINS Countertop basin OREGON Order no Certified to DIN EN 32 Dimensions 800 x 530 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 23,0 kg Mounting acc. excl. Mounting set, order no max max

146 VANITY BASINS Countertop basin OREGON Order no Certified to DIN EN 32 Dimensions 1000 x 530 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 29,3 kg Mounting acc. excl. Mounting set, order no max max

147 VANITY BASINS Double countertop basin OREGON DUE Order no Certified to DIN EN 32 Dimensions 1300 x 550 mm Specification per basin 1 centre tap hole anti-splash rim Special specification per basin 3 tap holes 39,0 kg Mounting acc. excl. Mounting set, order no max max

148 VANITY BASINS Countertop basin / cutable PALACE Order no Certified to DIN EN 32 Dimensions 1200 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 40,0 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* max max.295 * = minimum measure for cutting 9.4

151 VANITY BASINS Countertop basin / cutable PALACE Order no Certified to DIN EN 32 Dimensions 1200 x 550 mm Specification 1 centre tap hole incl. towel rail cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 40,0 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* max max.295 * = minimum measure for cutting 9.7

154 VANITY BASINS Countertop double basin / cutable PALACE DUE Order no Certified to DIN EN 32 Dimensions 1500 x 570 mm Specification per basin 1 centre tap hole cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 41,0 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* max max.295 * = minimum measure for cutting 9.10

155 VANITY BASINS Countertop double basin / cutable PALACE DUE Order no Certified to DIN EN 32 Dimensions 1800 x 570 mm Specification per basin 1 centre tap hole cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 43,0 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* max max.295 * = minimum measure for cutting 9.11

156 VANITY BASINS Countertop double basin / cutable PALACE DUE Order no Certified to DIN EN 32 Dimensions 1500 x 570 mm Specification per basin 1 centre tap hole incl. towel rail cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 41,0 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* max max.295 * = minimum measure for cutting 9.12

157 VANITY BASINS Countertop double basin / cutable PALACE DUE Order no Certified to DIN EN 32 Dimensions 1800 x 570 mm Specification per basin 1 centre tap hole incl. towel rail cutable to 1350 mm, with 2 side cover to 1380 mm Special specification per basin 3 tap holes 43,0 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1350* max max.295 * = minimum measure for cutting 9.13

158 VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Mark the relevant box or give precise measurements Colour Washbasins Palace mm mm Right-angled cut Precise measurements for symmetric cuts mm mm mm mm mm mm mm Precise measurements for asymmetric cuts mm mm L R L = mm R = mm symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angled cut on one side cut diagonally on one side Diagonal cut B F Precise measurements for symmetric cuts B = mm F = mm without end caps for cut surface with end cap(s) (already affixed) with 2 end caps (left and right) end cap(s) left end cap(s) right FL BL BR FR Precise measurements for asymmetric cuts BL = mm FL = mm BR = mm FR = mm ATTENTION: Only right angled cuts are possible. In case of deliveries with affixed end caps, the width given by you is always inclusive of the end caps. The uncut widths of the washbasins (1200, 1500, 1800 mm) are the usual ceramic tolerances. If exact widths for installation are required, there are also cuts for widths of 1200, 1500 and 1800 mm necessary. Note additional price for cutting! We recommande the basins / for cutting to 1500 mm, / for cutting to 1500 mm, / for cutting to 1200 mm, / for cutting to 1200 mm, / for cutting to 800 mm. WT Palace can be cut up to a max. (mm) M i n i m u m w e i d t h s symmetric cut asymmetric cut with 2 end caps (mm) with 1 end cap (mm) left min. (mm) right min. (mm) left min. with end cap (mm) right min. with end cap (mm) OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.14

159 VANITY BASINS Countertop basin / cutable FIORA Order no Certified to DIN EN 32 Dimensions 920 x 500 mm Specification 1 centre tap hole cutable 20,0 kg Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 500* max max.300 * = minimum measure for cutting 9.15

160 VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Washbasin Fiora mm Mark the relevant box or give precise measurements Colour Right angled cut Precise measurements for symmetric cut symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angle cut on one side cut diagonally on one side L R Diagonal cut B F mm Precise measurements for asymmetric cut L = mm R = mm Precise measurements for symmetric cut B = mm F = mm FL BL BR FR Precise measurements for asymmetric cut BL = mm FL = mm BR = mm FR = mm ATTENTION: There are no end caps for model The uncut width of the washbasin (920 mm) is the usual ceramic tolerances. If exact width for installation is required, there is also cut for width 920 necessary. Note additional price for cutting! M i n i m u m w e i d t h s symmetric cut asymmetric cut can be cut up to a max. left min right min Fiora (mm) (mm) (mm) OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.16

161 VANITY BASINS Countertop double basin FIORA DUE Order no Certified to DIN EN 32 Dimensions 1220 x 500 mm Specification per basin 1 centre tap hole 25,0 kg Mounting acc. excl. Mounting set, order no max max

162 VANITY BASINS Countertop washbasin SANO Order no Certified to DIN EN 32 Dimensions 670 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 14,0 kg Mounting acc. excl. Mounting set, order no max max.340 Z

166 VANITY BASINS Countertop basin / cutable VIENNA-VARIA Order no Certified to DIN EN 32 Dimensions 800 x 480 mm Specification 1 centre tap hole cutable to 650 mm, with 2 side cover to 680 mm Special specification 3 tap holes 13,5 kg Accessories excl. Syphon cover, order no Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 650* max max.295 * = minimum measure for cutting Z

167 VANITY BASINS Countertop basin / cutable VIENNA-VARIA Order no Certified to DIN EN 32 Dimensions 1000 x 550 mm Specification 1 centre tap hole cutable to 800 mm, with 2 side cover to 830 mm Special specification 3 tap holes 19,0 kg Accessories excl. Syphon cover, order no Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 800* max max.295 * = minimum measure for cutting Z

168 VANITY BASINS Countertop double basin / cutable VIENNA-VARIA DUE Order no Certified to DIN EN 32 Dimensions 1300 x 500 mm Specification per basin 1 centre tap hole cutable to 1150 mm, with 2 side cover to 1180 mm Special specification per basin 3 tap holes 26,6 kg Accessories excl. Side cover for cut surface left, order no right, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 1150* max max.295 * = minimum measure for cutting Z

169 VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Mark the relevant box or give precise measurements Colour Washbasins Vienna-Varia mm mm mm symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angled cut on one side cut diagonally on one side Right-angled cut L R Diagonal cut B Precise measurements for symmetric cuts mm Precise measurements for asymmetric cuts L = mm R = mm Precise measurements for symmetric cuts without end caps for cut surface with end cap(s) (already affixed) F B = mm F = mm with 2 end caps (left and right) end cap(s) left end cap(s) right FL BL BR FR Precise measurements for asymmetric cuts BL = mm FL = mm BR = mm FR = mm ATTENTION: Only right angled cuts are possible. In case of deliveries with affixed end caps, the width given by you is always inclusive of the end caps. The uncut widths of the washbasins (800, 1000, 1300 mm) are the usual ceramic tolerances. If exact widths for installation are required, there are also cuts for widths of 800, 1000, 1300 mm necessary. Note additional price for cutting! Vienna-Varia can be cut up to a max. (mm) M i n i m u m w e i d t h s symmetric cut asymmetric cut with 2 end caps (mm) with 1 end cap (mm) left min. (mm) right min. (mm) left min. with end cap (mm) right min. with end cap (mm) OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.25

170 VANITY BASINS Countertop basin DESIGN Order no Certified to DIN EN 32 Dimensions 1040 x 585 mm Specification 1 centre tap hole anti-splash rim Special specification 3 tap holes 20,0 kg Accessories excl. Pedestal, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 9.26

171 VANITY BASINS Pedestal Order no matching for Washbasin order no ,0 kg 9.27

172 VANITY BASINS Countertop basin / cutable GALLERY Order no Certified to DIN EN 32 Dimensions 1020 x 520 mm Specification 1 centre tap hole cutable Special specification 3 tap holes 18,0 kg Accessories excl. Syphon cover, order no Mounting acc. excl. Mounting set, order no Otherwise When ordering the cut version, state total overall measurement of washbasin (use the order form for cutting) 630* max max * = minimum measure for cutting 9.28

173 VANITY BASINS Order form for variable cuts of washbasins MAKE A COPY BEFORE FILLING OUT THE FORM! We would like to order piece(s) (Please use separate order form for each cut!) Washbasin Gallery mm Mark the relevant box or give precise measurements Colour Right angled cut Precise measurements for symmetric cut symmetric cut, right angle symmetric cut, diagonal asymmetric cut, right angle asymmetric cut, diagonal right angle cut on one side cut diagonally on one side L R Diagonal cut B F mm Precise measurements for asymmetric cut L = mm R = mm Precise measurements for symmetric cut B = mm F = mm FL BL BR FR Precise measurements for asymmetric cut BL = mm FL = mm BR = mm FR = mm ATTENTION: There are no end caps for model The uncut width of the washbasin (1020 mm) is the usual ceramic tolerances. If exact width for installation is required, there is also cut for width 1020 necessary. Note additional price for cutting! M i n i m u m w e i d t h s symmetric cut asymmetric cut can be cut up to a max. left min right min Gallery (mm) (mm) (mm) OBJECT: ORDER NO. FITTER: WHOLESALER: (or enclose order form) 9.29

174 VANITY BASINS Countertop double basin GALLERY Order no Certified to DIN EN 32 Dimensions 1350 x 520 mm Specification per basin 1 centre tap hole Special specification per basin 3 tap holes 30,5 kg Accessories excl. Syphon cover, order no Mounting acc. excl. Mounting set, order no max max

175 VANITY BASINS Syphon cover Order no matching for Washbasins order no , ,5 kg Mounting acc. incl. Device for fixing, order no

176 BUILT IN BASINS

177 VANITY BASINS Built in basin BIROVA Order no Dimensions 530 x 405 mm Specification without tap hole Special specification glazed outer surface 8,0 kg Mounting acc. excl. Mounting set, order no

178 VANITY BASINS Built in basin BIJOU Order no Dimensions 445 x 400 mm Specification 1 centre tap hole 7,0 kg Mounting acc. excl. Mounting set, order no

179 VANITY BASINS Built in basin BIJOU Order no Dimensions 520 x 455 mm Specification 1 centre tap hole Special specification glazed outer surface 9,5 kg Mounting acc. excl. Mounting set, order no

180 VANITY BASINS Built in basin BIJOU Order no Dimensions 550 x 480 mm Specification 1 centre tap hole Special specification glazed outer surface 9,5 kg Mounting acc. excl. Mounting set, order no

181 VANITY BASINS Built in basin BIJOU Order no Dimensions 555 x 485 mm Specification without tap hole 10,0 kg Mounting acc. excl. Mounting set, order no

182 VANITY BASINS Built in basin LIPSY Order no Dimensions 565 x 415 mm Specification without tap hole 8,0 kg Mounting acc. excl. Mounting set, order no

183 VANITY BASINS Built in basin FIORA Order no Dimensions 455 x 455 mm Specification 1 centre tap hole 8,0 kg Mounting acc. excl. Mounting set, order no

184 VANITY BASINS Built in basin FIORA Order no Dimensions 485 x 485 mm Specification 1 centre tap hole Special specification 3 tap holes 9,0 kg Mounting acc. excl. Mounting set, order no

185 VANITY BASINS Built in basin COMPAC Order no Dimensions 440 x 400 mm Specification 1 centre tap hole Special specification 3 tap holes 8,0 kg Mounting acc. excl. Mounting set, order no

186 VANITY BASINS Built in basin SAVOY Order no Dimensions 545 x 420 mm Specification without tap hole hidden overflow glazed outer surface 8,4 kg Mounting acc. excl. Mounting set, order no

187 VANITY BASINS Built in basin CRISTAL Order no Dimensions 520 x 446 mm Specification 1 centre tap hole 8,2 kg Mounting acc. excl. Mounting set, order no

188 7 VANITY BASINS Fixing set stone worktop worktop stone wooden worktop DESCRIPTION 1. Vanity basin 2. Silicon caoutchouc 3. Syntetic resin top 4. Syntetic resin adhesive 5. Worktop 6. Wooden wedge Order no matching to Built in basins order no , , , , , , , , , Tension clip 8. Wood screw 9. Dowelling paste 10. Pastened stone

189 2 7 VANITY BASINS Fixing set ca stone worktop wooden worktop Order no matching to Built in basin order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Tension clip 4. Wood screw 5. Silicon caoutchouc 6. Hexagonal screw with plug 7. Dowelling paste 9.44

190 DROP IN BASINS

191 VANITY BASINS Drop in basin INDOVA Order no Dimensions 560 x 450 mm Specification 1 centre tap hole 8,0 kg Mounting acc. incl. Template, order no Mounting acc. excl. Silicon caoutchouc

192 VANITY BASINS Drop in basin INDOVA Order no Dimensions 600 x 480 mm Specification 1 centre tap hole 9,0 kg Mounting acc. incl. Template, order no Mounting acc. excl. Silicon caoutchouc

193 VANITY BASINS Drop in basin INDOVA Order no Dimensions 620 x 485 mm Specification 1 centre tap hole Special specification 3 tap holes 9,5 kg Mounting acc. incl. Template, order no Mounting acc. excl. Silicon caoutchouc

194 VANITY BASINS Drop in basin VIENNA Order no Dimensions 555 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 7,2 kg Mounting acc. incl. Template, order no Mounting acc. excl. Mounting set, order no

195 VANITY BASINS Drop in basin VIENNA Order no Dimensions 630 x 510 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no Mounting acc. excl. Mounting set, order no

196 VANITY BASINS Drop in basin FIORA Order no Dimensions Ø 490 mm Specification 1 centre tap hole 12,0 kg Mounting acc. incl. Template, order no Mounting acc. excl. Silicon caoutchouc

197 VANITY BASINS Drop in basin MYLIFE Order no Dimensions 750 x 480 mm Specification Charge centre tap hole Special specification Charge 109 without tap hole 13,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Template, order no Mounting acc. excl. Mounting set, order no

198 VANITY BASINS Drop in basin OBJECT Order no Dimensions 560 x 420 mm Specification 1 centre tap hole Special specification 3 tap holes 8,5 kg Mounting acc. incl. Template, order no Mounting acc. excl. Mounting set, order no

199 VANITY BASINS Drop in basin LAURA Order no Dimensions 565 x 480 mm Specification 1 centre tap hole Special specification 3 tap holes 8,0 kg Mounting acc. incl. Template

200 VANITY BASINS Drop in basin ALESSI Order no Certified to DIN EN 32 Dimensions 500 x 500 mm Specification 1 centre tap hole 10,0 kg Mounting acc. incl. with concealed ceramic outlet and overflow, chrome-plated vertical cover, order no Template, order no Mounting acc. excl. Syphon D40 chrome order no /560* 600/660* /160* 900 * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 9.54

201 VANITY BASINS Mounting indication matching to Drop in basins order no , , , , DESCRIPTION 1. Vanity basin 2. Worktop 3. Silicon caoutchouc 9.55

202 VANITY BASINS Fixing set Order no matching to Drop in basins order no , , , DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 9.56

203 VANITY BASINS Mounting indication matching for Drop in basin order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Silicon caoutchouc 9.57

204 SEMI RECESSED BASINS

205 VANITY BASINS Semi recessed basin SWING Order no Dimensions 555 x 460 mm Specification 1 centre tap hole Special specification 3 tap holes 14,0 kg Mounting acc. incl. Template, order no Mounting set, order no

206 VANITY BASINS Semi recessed basin SWING Order no Dimensions 655 x 555 mm Specification 1 centre tap hole Special specification 3 tap holes 19,0 kg Mounting acc. incl. Template, order no Mounting set, order no

207 VANITY BASINS Semi recessed basin VIENNA Order no Dimensions 555 x 455 mm Specification 1 centre tap hole Special specification 3 tap holes 10,0 kg Mounting acc. incl. Template, order no Mounting set, order no

208 VANITY BASINS Semi recessed basin VIENNA Order no Dimensions 650 x 540 mm Specification 1 centre tap hole Special specification 3 tap holes 12,0 kg Mounting acc. incl. Template, order no Mounting set, order no

209 VANITY BASINS Semi recessed basin OBJECT Order no Dimensions 560 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 8,8 kg Mounting acc. incl. Template, order no Mounting set, order no

210 VANITY BASINS Semi recessed basin GALLERY Order no Dimensions 650 x 530 mm Specification 1 centre tap hole Special specification 3 tap holes 14,5 kg Mounting acc. incl. Template, order no Mounting set, order no

211 VANITY BASINS Fixing set Order no matching to Semi recessed basins oder no DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Silicon caoutchouc 9.64

212 VANITY BASINS Fixing set Order no matching to Semi recessed basins order no , , , , DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 9.65

213 WASHBASIN BOWLS

214 VANITY BASINS Washbasin bowl MYLIFE Order no Dimensions 650 x 440 mm Specification Charge centre tap hole Special specification Charge 109 without tap hole 13,0 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Template, order no Mounting set, order no

215 VANITY BASINS Washbasin bowl ALESSI Order no Certified to DIN EN 32 Dimensions 520 x 520 mm Specification Charge centre tap hole Special specification Charge 109 without tap hole 12,5 kg Mounting acc. incl. Charge 104 run off and overflow system Clou GEBERIT, order no Charge 109 valve without overflow, order no Template, order no Fixing set, order no Mounting acc. excl. Syphon D40 chrome, order no /160* 530/560* 600/560* * = Adhere to these dimensions if ALESSI-INDA furniture is being fitted. 9.67

216 VANITY BASINS Fixing set Order no matching to Washbasin bowl order no , DESCRIPTION 1. Washbasin bowl 2. Worktop 3. Silicon caoutchouc 4. Plug 5. Washer 6. Hexagonal nut 7. Grubscrew 9.68

217 SET DORADO

218 SET DORADO Washbasin Order no Certified to DIN EN 32 Dimensions 600 x 500 mm Specification 1 centre tap hole Special specification 3 tap holes 17,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. Z

219 SET DORADO Washbasin Order no Certified to DIN EN 32 Dimensions 650 x 500 mm Specification 1 centre tap hole Special specification 3 tap holes 19,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~840* * = Effective height must be fixed according to the height of the pedestal. Z

220 SET DORADO Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasins order no , ,6 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no , ,6 kg 10.3

221 SET DORADO Small washbasin TRIBERG Order no Certified to DIN EN 111 Dimensions 440 x 380 mm Specification without tap hole Special specification 1 centre tap hole 5,0 kg Mounting acc. incl. Mounting set, order no Z

222 SET DORADO Floorstanding WC combination DUO Order no Certified to EN 977, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical mm 23,5 kg Accessories excl. Cistern, order no , , , Seat and cover, order no Mounting acc. excl. Special elbow for vertical LAUFEN connection mm, order no Special elbow for vertical only LAUFENconnection mm, order no

223 SET DORADO Cistern MODERNA Order no Certified to DIN matching for Floorstanding WC pan order no Specification Flushing mechanisme GEBERIT water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 13,0 kg Mounting acc. excl. Corner valve for water inlet

224 SET DORADO Cistern MODERNA Order no Certified to Australian Standard matching for Floorstanding WC pan order no Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet side or rear 13,0 kg Mounting acc. excl. Corner valve for water inlet

225 SET DORADO Cistern MODERNA Order no Certified to Taiwan Standard matching for Floorstanding WC pan order no Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet bottom 13,0 kg

226 SET DORADO Cistern MODERNA Order no Certified to DIN matching for Floorstanding WC pan order no Specification Flushing mechanisme DAL water condensation insulation Flush can be interrupted by pressing twice Water inlet side or rear 13,0 kg Mounting acc. excl. Corner valve for water inlet

227 SET DORADO Floorstanding WC pan SEDAN Order no Specification Washdown Outlet vertical 13,0 kg Accessories excl. Seat and cover, order no

228 SET DORADO Floorstanding WC pan MELOS Order no Certified to EN 977, EN 37 Specification Washdown for 6-l-flush Outlet vertical 12,0 kg Accessories excl. Seat and cover, order no

229 SET DORADO Wallhung WC pan PROFIL Order no Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 14,0 kg Accessories excl. Seat and cover, order no

230 SET DORADO Wallhung WC pan SUPREMA Order no Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 14,0 kg Accessories excl. Seat and cover, order no

231 SET DORADO Seat and cover OBJECT Order no matching for Floorstanding WC pan order no , , Wallhung WC pan order no , ,8 kg Mounting set included 10.14

232 SET DORADO Floorstanding bidet MODERNA Order no Specification 1 centre tap hole 18,0 kg Z

233 SET DORADO Wallhung bidet SUPREMA Order no Specification 1 centre tap hole 14,5 kg Mounting acc. excl. Steel support, order no Steel support, UK-Version, order no Bolt caps, order no Z

234 SET OBJECT

235 SET OBJECT Washbasin Order no Certified to DIN EN 32 Dimensions 550 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 12,5 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 11.1

236 SET OBJECT Washbasin Order no Certified to DIN EN 32 Dimensions 600 x 400 mm Specification 1 centre tap hole Special specification 3 tap holes 12,5 kg Accessories excl. Syphon cover, order no Pedestal order, no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 11.2

239 SET OBJECT Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasins order no , , , ,5 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no , , , ,0 kg 11.5

240 SET OBJECT Drop in basin Order no Dimensions 560 x 420 mm Specification 1 centre tap hole Special specification 3 tap holes 8,5 kg Accessories incl. Template, order no Mounting acc. excl. Mounting set, order no

241 SET OBJECT Semi recessed basin Order no Dimensions 560 x 430 mm Specification 1 centre tap hole Special specification 3 tap holes 8,8 kg Mounting acc. incl. Template, order no Mountimg set, order no

242 SET OBJECT Fixing set Order no matching for Drop in basin order no Semi recessed basin order no DESCRIPTION 1. Vanity basin 2. Worktop 3. Fixing part 4. Adjusting screw 5. Hexagonal screw with plug 6. Silicon caoutchouc 11.8

243 SET OBJECT Small washbasin Order no Certified to DIN EN 111 Dimensions 500 x 220 mm Specification Prepunched tap hole left and right 6,0 kg Mounting acc. excl. Mounting set, order no

244 SET OBJECT Small washbasin Order no Certified to DIN EN 111 Dimensions 350 x 270 mm Specification 1 centre tap hole 5,2 kg Mounting acc. excl. Mounting set, order no

247 SET OBJECT Floorstanding WC combination Order no Certified to DIN EN 33 Specification Washdown for 6-l-flush Outlet vertical 20,0 kg Accessories excl. Cistern, order no , , , Seat and cover, order no Mounting acc. excl. Mounting set, order no

248 SET OBJECT Floorstanding WC combination Order no Certified to EN 977, EN 33 Specification Washdown for 6-l-flush Outlet horizontal VARIO, vertical mm 20,0 kg Accessories excl. Cistern, order no , , , Seat and cover, order no Mounting acc. excl. Special elbow for vertical connection, order no Mounting set, order no

249 SET OBJECT Cistern Order no Certified to DIN matching for Floorstanding WC pan order no , Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet rear or side 11,0 kg Mounting set incl. Corner valve for water inlet

250 SET OBJECT Cistern Order no Certified to China Standard matching for Floorstanding WC pan order no , Specification Flushing mechanisme DAL, Charge 290 Flush can be interrupted by pressing twice Water inlet bottom 11,0 kg

251 SET OBJECT Cistern Order no Certified to Taiwan Standard matching for Floorstanding WC pan order no , Specification Flushing mechanisme GEBERIT, Charge 291 Dual-Flush (3/6-l-flush) Water inlet bottom 11,0 kg

252 SET OBJECT Cistern Order no Certified to DIN KIWA matching for Floorstanding WC pan order no , Specification Flushing mechanisme DAL Flush can be interrupted by pressing twice Water inlet rear or side 11,0 kg Mounting set excl. Corner valve for water inlet

253 SET OBJECT Floorstanding WC pan Order no Certified to EN 977, EN 37 Specification Washdown for 6-l-flush Outlet horizontal 12,5 kg Accessories excl. Seat and cover, order no

254 SET OBJECT Wallhung WC pan Order no Certified to EN 977, EN 38 Specification Washdown for 6-l-flush 13,0 kg Accessories excl. Seat and cover, order no

255 SET OBJECT Seat and cover Order no matching for Floorstanding WC pan order no , , Wallhung WC pan order no ,8 kg Mounting set included 11.21

256 SET OBJECT Floorstanding bidet Order no Specification 1 centre tap hole 17,0 kg

257 SET OBJECT Floorstanding bidet Order no Specification 3 tap holes 19,0 kg

258 SET OBJECT Wallhung bidet Order no Specification 1 centre tap hole 16,0 kg Mounting acc. excl. Steel support, order no Steel support, UK-Version, order no Bolt caps, order no

259 SET BATHLINE

260 SET BATHLINE Washbasin Order no Certified to DIN EN 32 Dimensions 600 x 460 mm Specification 1 centre tap hole 15,0 kg Accessories excl. Syphon cover, order no Pedestal, order no Mounting acc. excl. Mounting set, order no ~850* * = Effective height must be fixed according to the height of the pedestal. 12.1

261 SET BATHLINE Syphon cover Pedestal / SYPHON COVER Order no matching for Washbasins order no ,5 kg Mounting acc. incl. Device for fixing, order no / PEDESTAL Order no matching for Washbasins order no ,0 kg 12.2

262 SET BATHLINE Floorstanding WC combination Order no Certified to EN 997, EN 33 Specification Washdown for 6-l-flush Outlet vertical 20,0 kg Accessories excl. Cistern, order no Seat and cover, order no

263 SET BATHLINE Cistern Order no Certified to DIN matching for Floorstanding WC pan order no Specification Flushing mechanisme GEBERIT water condensation insulation Dual-Flush (3/6-l-flush) Water inlet bottom 13,5 kg

264 SET BATHLINE Seat and cover Order no matching for Floorstanding WC pan order no Specification removable 1,95 kg Mounting set included 12.5

265 SET BATHLINE Floorstanding bidet Order no Specification 1 centre tap hole 16,5 kg

266 ACCESSORIES UNIVERSAL

267 ACCESSORIES Shelf UNIVERSAL Order no Dimensions 400 x 135 mm 2,0 kg TECHNICAL DRAWINGS / S 1 : * * 400 * = The exact measure must be determined at the installation. 13.1

271 ACCESSORIES Toilet roll holder UNIVERSAL Order no Dimensions 140 x 95 mm 0,8 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

272 ACCESSORIES Toilet brush holder UNIVERSAL Order no Dimensions 105 x 180 x 90 mm 1,1 kg Mounting acc. included TECHNICAL DRAWINGS / S 1 :

273 URINALS

274 URINALS Syphonic urinal TARO-NOVA Order no Certified to DIN 1390 Water inlet concealed Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 20,0 kg Mounting acc. excl. horizontal inlet connection GEBERIT no order no syphon with horizontal outlet GEBERIT no , order no syphon with vertical outlet and connection bend GEBERIT no , order no Stone screws, order no ø

275 URINALS Syphonic urinal TARO-UNI Order no Certified to DIN 1390 Water inlet external Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 20,0 kg Mounting acc. excl. vertical inlet connection GEBERIT no , order no syphon with horizontal outlet GEBERIT no , order no syphon with vertical outlet and connection bend GEBERIT no , order no Stone screws, order no ~40 ø9 ~280 ø

276 URINALS Syphonic urinal KAPRUN Order no Certified to DIN 1390 Water inlet external Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s matching for Corner urinal COMO order no ,5 kg Mounting acc. excl. Syphon with horizontal or vertical outlet, order no vertical inlet connection GEBERIT no , order no mounting set no , Charge ~

277 URINALS Syphonic urinal TAMARO Order no Certified to DIN 1390 Water inlet concealed Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 21,5 kg Mounting acc. excl. horizontal inlet connection GEBERIT no order no syphon with horizontal outlet GEBERIT no , order no syphon with vertical outlet and connection bend GEBERIT no , order no Stone screws, order no ø

278 URINALS Syphonic urinal TAMARO-S60B Order no / Charge 402 Certified to DIN 1390 Specification incl. control system GEBERIT for battery Water inlet concealed, 1/2 Outlet horizontal or vertical Flushing quantity minimum 1 l Flushing capacity minimum 0,3 l/s 23,0 kg Accessories excl. GEBERIT Service-Handy, order no GEBERIT Clean-Handy, order no Mounting acc. incl. Mounting acc. excl. brass inlet R 1/2, GEBERIT IR-electronic with 9V lithium battery syphon with horizontal outlet GEBERIT no , order no syphon with vertical outlet and connection bend GEBERIT no , order no Stone screws, order no /2"

279 URINALS Syphonic urinal TAMARO-S Order no Certified to DIN 1390 Specification incl. control system GEBERIT for net Water inlet concealed, 1/2 Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 23,0 kg Accessories excl. GEBERIT Service-Handy, order no GEBERIT Clean-Handy, order no Mounting acc. incl. Mounting acc. excl. brass inlet R 1/2, GEBERIT IR-electronic with plug and power supply syphon with horizontal outlet GEBERIT no , order no syphon with vertical outlet and connection bend GEBERIT no , order no Stone screws, order no /2"

280 URINALS Syphonic urinal TAMARO-VS Order no Certified to DIN 1390 Specification incl. control system GEBERIT for main circuit connection Water inlet concealed, 1/2 Outlet horizontal Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 28,0 kg Accessories incl. Accessories excl. Control system with all mounting accessories concealed water inlet, horizontal outlet Concealed electric socket to urinal, order no (To be installed by raw installation) 85 1/2"

281 URINALS Syphonic urinal CASA Order no Certified to DIN 1390 Specification Only to be used with cover Water inlet concealed Outlet horizontal Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 10,0 kg Accessories excl. Cover for urinal, order no Mounting acc. incl. Fixing srews, order no Mounting acc. excl. Syphon with concealed outlet, order no horizontal inlet connection GEBERIT no , order no

282 URINALS Cover for urinal CASA Order no matching for Syphonic urinal CASA, order no ,5 kg Mounting acc. included 14.9

283 URINALS Syphonic urinal CAPRINO Order no Certified to DIN 1390 Specification Charge 400 with fly Water inlet concealed Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 12,1 kg Mounting acc. excl. Syphon with horizontal or vertical outlet, order no horizontal inlet connection GEBERIT no order no mounting set no , Charge

284 URINALS Syphonic urinal CAPRINO Order no Certified to DIN 1390 Specification Charge 420 incl. control system WIMTEC for battery included Charge 400 with fly Water inlet external Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s 12,1 kg Mounting acc. incl. only Charge 420 Syphon with horizontal or vertical outlet, order no mounting set no , Charge 063 Mounting acc. excl. Syphon with horizontal or vertical outlet, order no vertical inlet connection GEBERIT no , order no mounting set no , Charge ~

285 URINALS Syphonic corner urinal COMO Order no Specification Charge 400 with fly Water inlet external Outlet horizontal or vertical Flushing quantity minimum 2 l Flushing capacity minimum 0,3 l/s matching for Syphonic urinal KAPRUN, order no ,0 kg Mounting acc. excl. Syphon with horizontal or vertical outlet, order no vertical inlet connection GEBERIT no , order no Brackets, order no ~

286 URINALS Urinal division RION Order no ,0 kg Mounting acc. incl. Fixing device, order no

287 SPECIAL ARTICLES

288 SPECIAL ARTICLES Washbasin for handicapped REHAB Order no Dimensions 660 x 550 mm Specification without tap hole without overflow Special specification 1 centre tap hole 17,0 kg Mounting acc. excl. Mounting set, order no Concealed syphon GEBERIT, order no

289 SPECIAL ARTICLES Wall sink BERNINA Order no Dimensions 505 x 510 mm Water inlet concealed Outlet concealed Flushing quantity minimum 8 l Flushing capacity minimum 2,1 l/s 25 kg Accessories excl. Grating, order no Screws to grating, order no ø ø

290 SPECIAL ARTICLES School washbasin COLLEGE Order no Dimensions 600 x 450 mm Specification without tap hole Special specification Charge centre tap hole Charge centre tap hole middle basin 20,5 kg Mounting acc. excl. Mounting set, order no Charge 503 Charge

291 SPECIAL ARTICLES Wallhung WC for children BAMBI Order no Specification Washdown for 6-l-flush Seating height 350 mm 14,0 kg Accessories excl. WC seat and cover, order no

292 SPECIAL ARTICLES Seat and cover BAMBI Order no matching for Wallhung WC pan order no ,3 kg Mounting set included 15.5

293 Technical catalogue

294 LAUFEN Austria ÖSPAG Österreichische Sanitär-, Keramik- und Porzellan-Industrie AG Färbergasse 11, P.O.Box 62 A Wilhelmsburg Telephon Fax Internet: